Engineering Structures Jobs in Monte Nido
31 positions found — Page 3
B
Primary Therapist
Salary not disclosed
Primary Therapist
BNI Treatment Centers
BNI Treatment Centers is seeking an experienced and passionate Primary Therapist to join our dynamic clinical team.
We are an acute residential treatment center serving adolescents ages 12–17 who are struggling with severe mental illness and substance use disorders. Our program is dedicated to stabilizing, treating, and empowering teens through individualized, evidence-based, and trauma-informed care.
Our multidisciplinary team collaborates closely to develop comprehensive treatment plans that restore stability, strengthen family systems, and place adolescents on a sustainable path forward.
⸻
Position Overview
The Primary Therapist is responsible for providing and overseeing therapeutic services for assigned patients. This role requires strong clinical judgment, leadership within the treatment team, and the ability to manage complex adolescent cases in a structured residential setting.
⸻
Essential Duties & Responsibilities
• Provide ongoing individual and family therapy services to assigned patients
• Conduct comprehensive intakes, biopsychosocial assessments, and diagnostic evaluations
• Develop, implement, and oversee individualized treatment plans
• Coordinate care with MFT Associates, Case Managers, and Psychiatrists
• Facilitate and actively participate in multidisciplinary treatment team meetings
• Lead discharge planning and aftercare coordination
• Provide crisis intervention to patients and families as needed
• Deliver clinical guidance and training to direct care staff regarding supervision and therapeutic interventions
• Maintain accurate, timely, and compliant documentation
The successful execution of these responsibilities is essential to maintaining clinical excellence and positive treatment outcomes.
⸻
Required Credentials
Applicants must hold one of the following California credentials:
• Licensed Clinical Psychologist (PsyD or PhD)
• Registered Psychological Associate (Associate PsyD / PhD, supervision provided if applicable)
• Licensed Marriage and Family Therapist (LMFT)
• Licensed Clinical Social Worker (LCSW)
Additional Requirements:
• Experience working with adolescents (residential or higher level of care preferred)
• Strong diagnostic and crisis intervention skills
• Ability to work collaboratively within a multidisciplinary team
• Commitment to a full-time, in-person role
• Valid driver’s license and reliable transportation
• Ability to pass a comprehensive background check
⸻
Benefits
• Comprehensive Health Benefits (Medical, Dental, Vision)
• 401(k) Retirement Plan
• Paid Time Off (PTO), Sick Leave, and Paid Holidays
• On-site meals prepared daily by our skilled chefs
• Supportive, team-oriented clinical culture
Not Specified
D
Engineering Technician
🏢 DCS Corp
Salary not disclosed
Salary Range: $70,310
- $85,000 We are seeking a talented and motivated Electrical Technician to play a crucial role in developing and maintaining cutting-edge avionic systems.
In this position, you will be responsible for the hands-on fabrication, assembly, and testing of custom electronic and avionics equipment that supports our nation's defense.
Essential Job Functions: Build custom electrical cable harnesses and full avionic system chassis with strong attention to detail.
Interpret electrical schematics / drawing packages to develop fabrication processes and product delivery estimates.
Fabricate custom electronic assemblies consisting of commercial and military style hardware, using industry tools and soldering.
Assemble custom avionic chassis' and populate commercial cabinets with internal wiring harnesses, PCBs, and relay panels.
Assist engineers with lab modification efforts, to include installing unique wire bundles, in-place wiring changes, and re-configuring equipment racks.
Assist with Quality Assurance checks and troubleshooting on products according to schematics, using multi-meter and oscilloscope.
Performs assignments that are not completely standardized or prescribed, selects or adapts standard procedures or equipment, using fully applicable precedents, receives initial instructions, equipment requirements, and advice from supervisor or engineer as needed, performs recurring work independently.
Constructing components, subunits, or simple models or adapts standard equipment; may troubleshoot and correct malfunctions.
Following specific layout and scientific diagrams to construct and package simple devices and subunits of equipment Extracting and compiling a variety of engineering data from field notes, manuals, lab reports, etc., processing data, identifying errors or inconsistencies Assisting in design modification by compiling data related to design, specifications, and materials that are pertinent to specific items of equipment or component parts; developing information concerning previous operational failures and modifications and using judgment and initiative to recognize inconsistencies or gaps in data and seek sources to clarify information.
Required Skills: Due to the sensitivity of customer related requirements, U.S.
Citizenship is required.
Must be able to be granted a security clearance and maintain one for the duration of employment.
High school diploma and at least four (7 +) years of practical experience.
Ability to earn and/or maintain IPC Standard Certifications for soldering, wire harness manufacturing, and PCB assembly.
Ability to read electrical schematics and fabrication drawings.
Ability to operate basic hand and power tools.
Ability to learn how to operate in-shop equipment (drill press, band saw, label makers).
Have conceptual knowledge and inventiveness to address issues and challenges.
Experience Evaluating and verifying units for any malfunctions or potential failures.
Experience diagnosing and repairing electrical components of systems.
- $85,000 We are seeking a talented and motivated Electrical Technician to play a crucial role in developing and maintaining cutting-edge avionic systems.
In this position, you will be responsible for the hands-on fabrication, assembly, and testing of custom electronic and avionics equipment that supports our nation's defense.
Essential Job Functions: Build custom electrical cable harnesses and full avionic system chassis with strong attention to detail.
Interpret electrical schematics / drawing packages to develop fabrication processes and product delivery estimates.
Fabricate custom electronic assemblies consisting of commercial and military style hardware, using industry tools and soldering.
Assemble custom avionic chassis' and populate commercial cabinets with internal wiring harnesses, PCBs, and relay panels.
Assist engineers with lab modification efforts, to include installing unique wire bundles, in-place wiring changes, and re-configuring equipment racks.
Assist with Quality Assurance checks and troubleshooting on products according to schematics, using multi-meter and oscilloscope.
Performs assignments that are not completely standardized or prescribed, selects or adapts standard procedures or equipment, using fully applicable precedents, receives initial instructions, equipment requirements, and advice from supervisor or engineer as needed, performs recurring work independently.
Constructing components, subunits, or simple models or adapts standard equipment; may troubleshoot and correct malfunctions.
Following specific layout and scientific diagrams to construct and package simple devices and subunits of equipment Extracting and compiling a variety of engineering data from field notes, manuals, lab reports, etc., processing data, identifying errors or inconsistencies Assisting in design modification by compiling data related to design, specifications, and materials that are pertinent to specific items of equipment or component parts; developing information concerning previous operational failures and modifications and using judgment and initiative to recognize inconsistencies or gaps in data and seek sources to clarify information.
Required Skills: Due to the sensitivity of customer related requirements, U.S.
Citizenship is required.
Must be able to be granted a security clearance and maintain one for the duration of employment.
High school diploma and at least four (7 +) years of practical experience.
Ability to earn and/or maintain IPC Standard Certifications for soldering, wire harness manufacturing, and PCB assembly.
Ability to read electrical schematics and fabrication drawings.
Ability to operate basic hand and power tools.
Ability to learn how to operate in-shop equipment (drill press, band saw, label makers).
Have conceptual knowledge and inventiveness to address issues and challenges.
Experience Evaluating and verifying units for any malfunctions or potential failures.
Experience diagnosing and repairing electrical components of systems.
Not Specified
D
Electronics Design Engineer
🏢 DCS Corp
Salary not disclosed
Salary Range: $82,004
- $111,000 Electronics Design Engineer We are seeking a talented and motivated Electrical Engineer with expertise in RF, hardware, and software design to join our dynamic team.
In this role, you will be at the forefront of designing and developing cutting-edge electrical equipment for a variety of applications, including commercial, industrial, military, and scientific projects.
If you are passionate about innovation and want to contribute to complex real-time systems, we encourage you to apply Essential Job Functions: Design and develop RF based Circuit Card Assemblies (CCAs) for RF applications.
Troubleshoot, maintain, upgrade and test CCAs.
Write and debug firmware for new products.
Integrate CCAs into VME backplane.
Design multi-layer CCAs using PCB design tools.
Integrate VME based CCAs into complex real time systems for RF simulation and modeling.
Test and troubleshoot electronic circuits.
Required Skills: Due to the sensitivity of customer related requirements, U.S.
citizenship is required.
Must be eligible to obtain and maintain a security clearance.
Must have a bachelor’s degree in an engineering discipline plus 5+ years of relevant experience Experience with designing new multi-layered Printed Circuit Boards (PCB)s Experience designing new electronic Circuit Card Assemblies (CCAs).
Experience with digital and analog circuit design.
Experience developing and working with VME based backplanes and PCBs Experience working with Real Time Embedded systems Desired Skills: Experience with FPGA/PLD design, digital signal processing.
Experience with board design to support RF analysis and modulation.
Design and development of RF based digital/analog HW and SW Experience working with the following tools: Mentor Graphics PADS, Cadence OrCAD PCB Designer Suite, MAX+PLUS II, Quartus Experience utilizing RF laboratory test equipment including signal generators, spectrum analyzers, power meters, and network analyzers.
- $111,000 Electronics Design Engineer We are seeking a talented and motivated Electrical Engineer with expertise in RF, hardware, and software design to join our dynamic team.
In this role, you will be at the forefront of designing and developing cutting-edge electrical equipment for a variety of applications, including commercial, industrial, military, and scientific projects.
If you are passionate about innovation and want to contribute to complex real-time systems, we encourage you to apply Essential Job Functions: Design and develop RF based Circuit Card Assemblies (CCAs) for RF applications.
Troubleshoot, maintain, upgrade and test CCAs.
Write and debug firmware for new products.
Integrate CCAs into VME backplane.
Design multi-layer CCAs using PCB design tools.
Integrate VME based CCAs into complex real time systems for RF simulation and modeling.
Test and troubleshoot electronic circuits.
Required Skills: Due to the sensitivity of customer related requirements, U.S.
citizenship is required.
Must be eligible to obtain and maintain a security clearance.
Must have a bachelor’s degree in an engineering discipline plus 5+ years of relevant experience Experience with designing new multi-layered Printed Circuit Boards (PCB)s Experience designing new electronic Circuit Card Assemblies (CCAs).
Experience with digital and analog circuit design.
Experience developing and working with VME based backplanes and PCBs Experience working with Real Time Embedded systems Desired Skills: Experience with FPGA/PLD design, digital signal processing.
Experience with board design to support RF analysis and modulation.
Design and development of RF based digital/analog HW and SW Experience working with the following tools: Mentor Graphics PADS, Cadence OrCAD PCB Designer Suite, MAX+PLUS II, Quartus Experience utilizing RF laboratory test equipment including signal generators, spectrum analyzers, power meters, and network analyzers.
Not Specified
J
Maintenance Technician
🏢 Jobot
Salary not disclosed
This Jobot Job is hosted by: Alex Luhrsen Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $26
- $38 per hour A bit about us: Lead Medical Device Manufacturer looking for a Maintenance Technician to join their team! Apply today! Why join us? Competitive Salary + Room for growth! 401(k) + Matching + Retirement plan Health insurance + Dental insurance + Vision insurance + Life insurance Flexible spending account Health savings account Generous Paid time off Friendly culture / Team environment Job Details Job Details: Our organization is seeking a skilled and experienced Maintenance Technician to join our dynamic Engineering team.
This is a permanent position, offering an exciting opportunity to work with cutting-edge machinery and technology in the engineering industry.
As a Maintenance Technician, you will be responsible for the maintenance and repair of various machinery, including medical devices.
You will also have the opportunity to work with conveyor systems, motors, pneumatics, and hydraulics.
This role requires a high degree of technical expertise and a strong commitment to safety and quality.
Responsibilities: As a Maintenance Technician, your duties will include: 1.
Performing routine and preventative maintenance on a variety of machines and equipment to ensure optimal functionality.
2.
Diagnosing and repairing mechanical and electrical faults in machinery, including motors, conveyors, and medical devices.
3.
Troubleshooting and repairing hydraulic and pneumatic systems.
4.
Collaborating with the engineering team to develop and implement maintenance strategies.
5.
Adhering to all safety protocols and procedures to maintain a safe and efficient work environment.
6.
Documenting all maintenance and repair work for record-keeping and future reference.
7.
Assisting in the installation and commissioning of new machinery and equipment.
8.
Providing technical expertise and guidance to junior staff members.
Qualifications: To qualify for this position, you must have: 1.
A minimum of 5 years' experience in a similar role within the engineering industry.
2.
Proven experience in machine maintenance, mechanical maintenance, and electrical troubleshooting.
3.
Expertise in working with conveyor systems, motors, pneumatics, and hydraulics.
4.
Experience in maintaining and repairing machinery, including medical devices.
5.
A strong understanding of safety protocols and procedures.
6.
Excellent problem-solving skills and the ability to troubleshoot complex machinery issues.
7.
Strong communication skills, with the ability to clearly explain technical concepts to non-technical colleagues.
8.
A relevant trade qualification or engineering degree would be advantageous.
This is an exciting opportunity for a seasoned Maintenance Technician to further their career in the engineering industry.
If you have a passion for machinery and technology and a commitment to safety and quality, we would love to hear from you.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $26
- $38 per hour A bit about us: Lead Medical Device Manufacturer looking for a Maintenance Technician to join their team! Apply today! Why join us? Competitive Salary + Room for growth! 401(k) + Matching + Retirement plan Health insurance + Dental insurance + Vision insurance + Life insurance Flexible spending account Health savings account Generous Paid time off Friendly culture / Team environment Job Details Job Details: Our organization is seeking a skilled and experienced Maintenance Technician to join our dynamic Engineering team.
This is a permanent position, offering an exciting opportunity to work with cutting-edge machinery and technology in the engineering industry.
As a Maintenance Technician, you will be responsible for the maintenance and repair of various machinery, including medical devices.
You will also have the opportunity to work with conveyor systems, motors, pneumatics, and hydraulics.
This role requires a high degree of technical expertise and a strong commitment to safety and quality.
Responsibilities: As a Maintenance Technician, your duties will include: 1.
Performing routine and preventative maintenance on a variety of machines and equipment to ensure optimal functionality.
2.
Diagnosing and repairing mechanical and electrical faults in machinery, including motors, conveyors, and medical devices.
3.
Troubleshooting and repairing hydraulic and pneumatic systems.
4.
Collaborating with the engineering team to develop and implement maintenance strategies.
5.
Adhering to all safety protocols and procedures to maintain a safe and efficient work environment.
6.
Documenting all maintenance and repair work for record-keeping and future reference.
7.
Assisting in the installation and commissioning of new machinery and equipment.
8.
Providing technical expertise and guidance to junior staff members.
Qualifications: To qualify for this position, you must have: 1.
A minimum of 5 years' experience in a similar role within the engineering industry.
2.
Proven experience in machine maintenance, mechanical maintenance, and electrical troubleshooting.
3.
Expertise in working with conveyor systems, motors, pneumatics, and hydraulics.
4.
Experience in maintaining and repairing machinery, including medical devices.
5.
A strong understanding of safety protocols and procedures.
6.
Excellent problem-solving skills and the ability to troubleshoot complex machinery issues.
7.
Strong communication skills, with the ability to clearly explain technical concepts to non-technical colleagues.
8.
A relevant trade qualification or engineering degree would be advantageous.
This is an exciting opportunity for a seasoned Maintenance Technician to further their career in the engineering industry.
If you have a passion for machinery and technology and a commitment to safety and quality, we would love to hear from you.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
D
Software Engineer - GUI/OpenGL
🏢 DCS Corp
Salary not disclosed
Salary Range: $82,004
- $125,000 Research, design, develop, test, or supervise the manufacturing and installation of electrical equipment, components, or systems for commercial, industrial, military, or scientific use.
The Software Engineer will design, develop, integrate, and test advanced software applications with a primary focus on Graphical User Interface (GUI) development using OpenGL and Microsoft Visual Studio.
The role requires strong knowledge of real-time rendering, visualization, and user interaction design, as well as the ability to interface software applications with external Radio Frequency (RF) systems.
The engineer will collaborate with cross-functional teams, including hardware, systems, and test engineers, to deliver high-performance, mission-focused software solutions for Department of Defense (DoD) programs.
Essential Job Functions: Design and implement GUI applications using OpenGL, C/C++, and Microsoft Visual Studio to support real-time visualization and system control using state of the art GUIs.
Develop, integrate, and validate software interfaces that communicate with external RF systems, radios, and hardware components via standard communications protocols (Ethernet, HP-IB/GPIB, USB, and Standard Commands for Programmable Instruments [SCPI]).
Implement data visualization, signal monitoring, and control modules aligned with system-level requirements.
Collaborate with systems, RF, test, and hardware engineers to define communication protocols and ensure seamless software-hardware integration.
Optimize GUI performance for real-time responsiveness, rendering efficiency, and reliability.
Develop and maintain software documentation, including design descriptions, interface specifications, and test procedures.
Participate in code reviews, system integration events, and software configuration management processes.
Troubleshoot and resolve software defects, interface issues, and performance bottlenecks.
Support lab testing, field demonstrations, and customer design reviews as needed.
Ensure all development activities adhere to internal quality standards and relevant Navy Systems Engineering Technical Reviews (SETR) compliance requirements.
Knowledgeable with DoDI 5000.02 Adaptive Acquisition Framework (AAF) systems engineering methodology.
Required skills: Due to the sensitivity of customer related requirements, U.S.
Citizenship is required.
Bachlors degree in Computer Science, Software Engineering, Electrical Engineering, or related technical field and a minimum of 5 years’ experience Must be eligible to obtain and maintain a security clearance.
3–8+ years of experience in software development with strong proficiency in C/C++.
Demonstrated experience designing and implementing OpenGL-based GUIs.
Experience with OpenGL Shading Language (GLSL), DirectX, or modern rendering pipelines.
Strong experience with Microsoft Visual Studio development environment.
Experience integrating software with RF systems, radios, or external hardware interfaces.
Knowledge of communication protocols such as TCP/IP, UDP, HP-IB/GPIB, USB, serial communication, SCPI or custom hardware interfaces.
Proficiency with version control tools (e.g., Git).
Strong debugging, problem-solving, and analytical skills.
Ability to work in a fast-paced engineering environment and collaborate with multidisciplinary teams.
Desired Skills Experience in embedded systems or real-time software development.
Familiarity with signal processing, RF fundamentals, or wireless communication concepts.
Prior experience developing software for DoW, aerospace, or mission-critical applications.
Knowledge of Agile/Scrum development methodologies.
- $125,000 Research, design, develop, test, or supervise the manufacturing and installation of electrical equipment, components, or systems for commercial, industrial, military, or scientific use.
The Software Engineer will design, develop, integrate, and test advanced software applications with a primary focus on Graphical User Interface (GUI) development using OpenGL and Microsoft Visual Studio.
The role requires strong knowledge of real-time rendering, visualization, and user interaction design, as well as the ability to interface software applications with external Radio Frequency (RF) systems.
The engineer will collaborate with cross-functional teams, including hardware, systems, and test engineers, to deliver high-performance, mission-focused software solutions for Department of Defense (DoD) programs.
Essential Job Functions: Design and implement GUI applications using OpenGL, C/C++, and Microsoft Visual Studio to support real-time visualization and system control using state of the art GUIs.
Develop, integrate, and validate software interfaces that communicate with external RF systems, radios, and hardware components via standard communications protocols (Ethernet, HP-IB/GPIB, USB, and Standard Commands for Programmable Instruments [SCPI]).
Implement data visualization, signal monitoring, and control modules aligned with system-level requirements.
Collaborate with systems, RF, test, and hardware engineers to define communication protocols and ensure seamless software-hardware integration.
Optimize GUI performance for real-time responsiveness, rendering efficiency, and reliability.
Develop and maintain software documentation, including design descriptions, interface specifications, and test procedures.
Participate in code reviews, system integration events, and software configuration management processes.
Troubleshoot and resolve software defects, interface issues, and performance bottlenecks.
Support lab testing, field demonstrations, and customer design reviews as needed.
Ensure all development activities adhere to internal quality standards and relevant Navy Systems Engineering Technical Reviews (SETR) compliance requirements.
Knowledgeable with DoDI 5000.02 Adaptive Acquisition Framework (AAF) systems engineering methodology.
Required skills: Due to the sensitivity of customer related requirements, U.S.
Citizenship is required.
Bachlors degree in Computer Science, Software Engineering, Electrical Engineering, or related technical field and a minimum of 5 years’ experience Must be eligible to obtain and maintain a security clearance.
3–8+ years of experience in software development with strong proficiency in C/C++.
Demonstrated experience designing and implementing OpenGL-based GUIs.
Experience with OpenGL Shading Language (GLSL), DirectX, or modern rendering pipelines.
Strong experience with Microsoft Visual Studio development environment.
Experience integrating software with RF systems, radios, or external hardware interfaces.
Knowledge of communication protocols such as TCP/IP, UDP, HP-IB/GPIB, USB, serial communication, SCPI or custom hardware interfaces.
Proficiency with version control tools (e.g., Git).
Strong debugging, problem-solving, and analytical skills.
Ability to work in a fast-paced engineering environment and collaborate with multidisciplinary teams.
Desired Skills Experience in embedded systems or real-time software development.
Familiarity with signal processing, RF fundamentals, or wireless communication concepts.
Prior experience developing software for DoW, aerospace, or mission-critical applications.
Knowledge of Agile/Scrum development methodologies.
Not Specified
D
Systems Engineer
🏢 DCS Corp
Salary not disclosed
Salary Range: $71,307
- $85,000 Systems Engineer We are seeking a highly motivated Systems Engineer to support our multidisciplinary team of experts.
In this role, you will be at the forefront of innovation, contributing to the development of sophisticated hardware and software solutions for complex challenges in the electronic warfare domain.
Essential Job Functions: Collaborating with a dedicated engineering team, including specialists in software, FPGA, hardware, RF/antenna, and mechanical design Conducting in-depth analysis of system components to drive implementation strategies and define requirements for advanced EW systems Develop and utilize high-fidelity MATLAB models and simulations that encompass sensor phenomenology, signal processing, detection, tracking, and discrimination algorithms.
Coordinate analysis activities and products with functional team leaders, senior management, and other personnel responsible for executing analysis tasks.
Document analysis results in reports and briefings.
Experience with MATLAB programming for conducting analysis and architecting models and simulations Required Skills: Due to the sensitivity of customer related requirements, U.S.
citizenship is required.
Must be eligible to obtain and maintain a security clearance.
Bachelor’s degree in engineering, Science, or Math is required with a minimum of 2 plus years of relevant experience.
Desired Skills: Analysis experience in aspects of airborne EW systems.
Experience with Digital RF Memory (DRFM).
- $85,000 Systems Engineer We are seeking a highly motivated Systems Engineer to support our multidisciplinary team of experts.
In this role, you will be at the forefront of innovation, contributing to the development of sophisticated hardware and software solutions for complex challenges in the electronic warfare domain.
Essential Job Functions: Collaborating with a dedicated engineering team, including specialists in software, FPGA, hardware, RF/antenna, and mechanical design Conducting in-depth analysis of system components to drive implementation strategies and define requirements for advanced EW systems Develop and utilize high-fidelity MATLAB models and simulations that encompass sensor phenomenology, signal processing, detection, tracking, and discrimination algorithms.
Coordinate analysis activities and products with functional team leaders, senior management, and other personnel responsible for executing analysis tasks.
Document analysis results in reports and briefings.
Experience with MATLAB programming for conducting analysis and architecting models and simulations Required Skills: Due to the sensitivity of customer related requirements, U.S.
citizenship is required.
Must be eligible to obtain and maintain a security clearance.
Bachelor’s degree in engineering, Science, or Math is required with a minimum of 2 plus years of relevant experience.
Desired Skills: Analysis experience in aspects of airborne EW systems.
Experience with Digital RF Memory (DRFM).
Not Specified
J
Information Systems Security Specialist- Point Mugu, CA
🏢 JT4 LLC
Salary not disclosed
JT4 Point Mugu is seeking an Information Systems Security Specialist.
This role is responsible for assessing, developing and implementing programs and controls set in place to help increase cybersecurity within our company.
The Information Systems Security Specialist will be detail-oriented, have great problem-solving and analytical skills, and a passion for cybersecurity.
JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
**An ideal candidate will have an active DoD secret clearance
** **This position is located at Point Mugu and is not eligible for telework
** Job Summary -- Essential Functions/Duties This position is the on-site technical specialist for monitoring information systems and maintaining the environment of operation to include developing and updating System Security Plans, managing and controlling changes to the systems, conducting audits, providing incident response, perpetration for vulnerability assessments, and assessing the security impact of security and non-security-relevant changes.
Employee will be responsible to perform the following functions/duties: Provides incident handling in conjunction with the Facility Security Office (FSO) and Information Security Officer / Information Systems Security Manager (ISSO/ISSM) Assists in writing and maintaining computer security processes to meet Air Force requirements of Risk Management Framework Monitors computer system use and audits logs Makes recommendations for future hardware / software implementations and related process improvements This position requires skills in team building and customer service Provides operational status as required Uses established policies and procedures and subject matter knowledge to complete complex assignments requiring originality and ingenuity performed under minimum supervision with considerable latitude for independent contribution Provides security training and awareness briefings Other duties as assigned.
Requirements -- Education, Technical, and Work Experience Associates or higher degree in Computer/Information Technology, or equivalent academic/technical training/certification.
Possess two to three years of experience in computer system security and/or related areas of expertise.
Must be compliant to DoD 8570.01-M levels and possess or working toward Security+ certification with a CISSP desired.
Should have experience with JSIG, NIST 800 and NISPOM, Chapter 8.
In addition, an Information Systems Security Specialist must possess the following qualifications: Must possess and apply a broad knowledge of principles, practices and procedures in computer security and information systems and working experience with Microsoft Office, Access, and Visio Must possess experience supporting various system configurations such as Stand Alone, Local Area Networks, and Wide Area Networks Must possess excellent skills in verbal and written communications, planning, and organizing Ability to work under deadlines.
Employee is expected to routinely cross fields in the completion of somewhat difficult and varied assignments.
Government vehicle is used on an as-needed basis Ability to work in a field environment at remote locations with occasional overnight assignments Must qualify for and maintain a government security clearance Must possess a valid, state-issued driver's license.
Salary The expected salary range for this position is $83,902.47 to $120,500 annually.
The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4 LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and business considerations when extending an offer.
Benefits Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50% up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement Other Responsibilities Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
Working Conditions This position involves work typical of an office environment with no unusual hazards.
There is occasional lifting (up to 20 pounds), constant sitting and use of a computer terminal, constant use of sight abilities while writing, reviewing, and editing documents, constant use of speech/hearing abilities for communication, and constant mental alertness.
Disclaimer The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JCIS11; A4PMSR
This role is responsible for assessing, developing and implementing programs and controls set in place to help increase cybersecurity within our company.
The Information Systems Security Specialist will be detail-oriented, have great problem-solving and analytical skills, and a passion for cybersecurity.
JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
**An ideal candidate will have an active DoD secret clearance
** **This position is located at Point Mugu and is not eligible for telework
** Job Summary -- Essential Functions/Duties This position is the on-site technical specialist for monitoring information systems and maintaining the environment of operation to include developing and updating System Security Plans, managing and controlling changes to the systems, conducting audits, providing incident response, perpetration for vulnerability assessments, and assessing the security impact of security and non-security-relevant changes.
Employee will be responsible to perform the following functions/duties: Provides incident handling in conjunction with the Facility Security Office (FSO) and Information Security Officer / Information Systems Security Manager (ISSO/ISSM) Assists in writing and maintaining computer security processes to meet Air Force requirements of Risk Management Framework Monitors computer system use and audits logs Makes recommendations for future hardware / software implementations and related process improvements This position requires skills in team building and customer service Provides operational status as required Uses established policies and procedures and subject matter knowledge to complete complex assignments requiring originality and ingenuity performed under minimum supervision with considerable latitude for independent contribution Provides security training and awareness briefings Other duties as assigned.
Requirements -- Education, Technical, and Work Experience Associates or higher degree in Computer/Information Technology, or equivalent academic/technical training/certification.
Possess two to three years of experience in computer system security and/or related areas of expertise.
Must be compliant to DoD 8570.01-M levels and possess or working toward Security+ certification with a CISSP desired.
Should have experience with JSIG, NIST 800 and NISPOM, Chapter 8.
In addition, an Information Systems Security Specialist must possess the following qualifications: Must possess and apply a broad knowledge of principles, practices and procedures in computer security and information systems and working experience with Microsoft Office, Access, and Visio Must possess experience supporting various system configurations such as Stand Alone, Local Area Networks, and Wide Area Networks Must possess excellent skills in verbal and written communications, planning, and organizing Ability to work under deadlines.
Employee is expected to routinely cross fields in the completion of somewhat difficult and varied assignments.
Government vehicle is used on an as-needed basis Ability to work in a field environment at remote locations with occasional overnight assignments Must qualify for and maintain a government security clearance Must possess a valid, state-issued driver's license.
Salary The expected salary range for this position is $83,902.47 to $120,500 annually.
The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4 LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and business considerations when extending an offer.
Benefits Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50% up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement Other Responsibilities Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
Working Conditions This position involves work typical of an office environment with no unusual hazards.
There is occasional lifting (up to 20 pounds), constant sitting and use of a computer terminal, constant use of sight abilities while writing, reviewing, and editing documents, constant use of speech/hearing abilities for communication, and constant mental alertness.
Disclaimer The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JCIS11; A4PMSR
Not Specified
J
Environmental Safety and Health Specialist - Point Mugu CA
🏢 JT4 LLC
Salary not disclosed
JT4 China Lake is seeking an Environmental Safety and Health (ES&H) Specialist.
The role is responsible for assisting in providing support, analyzing, investigating, and reporting matters pertaining to ES&H issues.
This position will also involve tasks with work place hazards and inspections to ensure compliance with Navy regulations and OHSA standards.
JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
**An ideal candidate will have an active Secret clearance
** **This position is located at Point Mugu and is not eligible for telework
** Job Summary -- Essential Functions/Duties Wo Working under general direction of senior department personnel, an ES&H Specialist III performs moderately complex technical work in a wide range of ES&H disciplines in order to achieve compliance with company ES&H standards and regulatory requirements.
Employee will be responsible to perform the following functions/duties: Assist in the development, implementation, and maintenance of ES&H written programs, systems, and procedures necessary to ensure the safety and health of employees and the community Perform site audits and assessment activities, direct incident investigation efforts, and recommend approaches to solutions Maintain a working knowledge of specific requirements imposed by government agencies, the Air Force, and other customer requirements Identify and evaluate environmental or safety hazards and make recommendations for corrective actions Enforce compliance of operations personnel with the established Environmental Safety and Health guidelines, policies, and related proper practices Provide technical guidance to less experienced personnel Perform other job-related duties, as required.
Requirements -- Education, Technical, and Work Experience A graduate certificate from a two-to-four-year technical institute or college, or equivalent formal technical training or military equivalent, and eight or more years of experience in a directly related technical working environment are required for this position.
In addition, an ES&H Specialist III must possess the following qualifications: Base of knowledge sufficient to oversee the performance of technically diverse tasks assigned to the section or unit Working knowledge of management techniques and interpersonal skills sufficient to interface with and effectively direct subordinates Practical knowledge of company policies, procedures, and practices sufficient to perform as an effective, informed supervisor In-depth working knowledge of the technical concepts, principles, and requirements associated with the work unit Planning/organizational skills Ability to work under deadlines.
The expected salary range for this position is $94,203 to $109,203 annually The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4 LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and business considerations when extending an offer.
Benefits Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50% up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement Other Responsibilities Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
Working Conditions Work is performed in a typical office environment.
Occasional lifting (up to 40 pounds), constant sitting while using the computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness are required.
Employee will be required to climb towers and fly to remote locations in fixed wing aircraft and or helicopters in addition to traveling on a boat to remote locations.
The foregoing conditions and physical requirements represent the general characteristics required to perform the essential functions for this job.
In general, all positions may require standing, walking, sitting, lifting, carrying, pushing, pulling, climbing, bending, twisting, kneeling, crouching, and crawling.
Specific work assignments may include additional environmental conditions or physical requirements necessary to perform the essential functions of the job.
These specific requirements will be detailed in the job posting.
JT4 employees will only operate equipment that they have been fully trained on and/or certified to operate.
If working in a training capacity, employees must be supervised at all times by a competent trained or certified company employee.
Under no circumstances should employees use another employee's equipment without permission from their immediate supervisor or manager.
Conversely, employees should not allow other JT4 employees or employees of another employer to use JT4-owned or assigned equipment without proof of training and approval of the shop manager.
Disclaimer The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JESH3; A4PMSR
The role is responsible for assisting in providing support, analyzing, investigating, and reporting matters pertaining to ES&H issues.
This position will also involve tasks with work place hazards and inspections to ensure compliance with Navy regulations and OHSA standards.
JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
**An ideal candidate will have an active Secret clearance
** **This position is located at Point Mugu and is not eligible for telework
** Job Summary -- Essential Functions/Duties Wo Working under general direction of senior department personnel, an ES&H Specialist III performs moderately complex technical work in a wide range of ES&H disciplines in order to achieve compliance with company ES&H standards and regulatory requirements.
Employee will be responsible to perform the following functions/duties: Assist in the development, implementation, and maintenance of ES&H written programs, systems, and procedures necessary to ensure the safety and health of employees and the community Perform site audits and assessment activities, direct incident investigation efforts, and recommend approaches to solutions Maintain a working knowledge of specific requirements imposed by government agencies, the Air Force, and other customer requirements Identify and evaluate environmental or safety hazards and make recommendations for corrective actions Enforce compliance of operations personnel with the established Environmental Safety and Health guidelines, policies, and related proper practices Provide technical guidance to less experienced personnel Perform other job-related duties, as required.
Requirements -- Education, Technical, and Work Experience A graduate certificate from a two-to-four-year technical institute or college, or equivalent formal technical training or military equivalent, and eight or more years of experience in a directly related technical working environment are required for this position.
In addition, an ES&H Specialist III must possess the following qualifications: Base of knowledge sufficient to oversee the performance of technically diverse tasks assigned to the section or unit Working knowledge of management techniques and interpersonal skills sufficient to interface with and effectively direct subordinates Practical knowledge of company policies, procedures, and practices sufficient to perform as an effective, informed supervisor In-depth working knowledge of the technical concepts, principles, and requirements associated with the work unit Planning/organizational skills Ability to work under deadlines.
The expected salary range for this position is $94,203 to $109,203 annually The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4 LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and business considerations when extending an offer.
Benefits Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50% up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement Other Responsibilities Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
Working Conditions Work is performed in a typical office environment.
Occasional lifting (up to 40 pounds), constant sitting while using the computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness are required.
Employee will be required to climb towers and fly to remote locations in fixed wing aircraft and or helicopters in addition to traveling on a boat to remote locations.
The foregoing conditions and physical requirements represent the general characteristics required to perform the essential functions for this job.
In general, all positions may require standing, walking, sitting, lifting, carrying, pushing, pulling, climbing, bending, twisting, kneeling, crouching, and crawling.
Specific work assignments may include additional environmental conditions or physical requirements necessary to perform the essential functions of the job.
These specific requirements will be detailed in the job posting.
JT4 employees will only operate equipment that they have been fully trained on and/or certified to operate.
If working in a training capacity, employees must be supervised at all times by a competent trained or certified company employee.
Under no circumstances should employees use another employee's equipment without permission from their immediate supervisor or manager.
Conversely, employees should not allow other JT4 employees or employees of another employer to use JT4-owned or assigned equipment without proof of training and approval of the shop manager.
Disclaimer The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JESH3; A4PMSR
Not Specified
Residential Youth Caregiver - Relocation to Hershey, PA Required
Salary not disclosed
Description:
Located in Hershey, PA, Milton Hershey School (MHS) is a top-notch home and school where over 2,200 pre-K through 12th grade students from disadvantaged backgrounds are provided an extraordinary, cost-free, career-focused education. This is made possible by the generosity of Milton and Catherine Hershey, who established the school in 1909 and ensured it was fully endowed. Thanks to their foresight and generosity, the school has over 12,000 graduates and continues to expand to serve more students.
MHS is hiring married couples to serve as Full-time Flex Houseparents. In this unique and life-changing career, couples reside in on-campus student homes and provide care, guidance, supervision, and support for a group of approximately 8–13 students living in the home. Flex Houseparents play a vital role in creating a structured, family-like environment that fosters students’ academic, emotional, and social development so they can reach their full potential.
Responsibilities include:
- Providing daily supervision and mentorship
- Managing household routines and student schedules
- Administering medications and ensuring student wellness
- Driving students to activities, as well as planning and actively engaging in developmental and recreational activities with students
- Leading daily devotions and accompanying students to Sunday Chapel
- Overseeing budgeting and household reporting
Upon hire, Flex Houseparents initially support various student homes and follow a working schedule of nine consecutive days on duty, followed by three days off. On weekdays, houseparents have unscheduled time while students are in school. Flex Houseparents eventually transition into a Placed Houseparent role, where they live and work with the same group of students in their own student home.
Benefits include:
- Salary: $44,768.00 per person (approximately $168,000 total compensation per couple, including free housing, meals while on duty, utilities, and more)
- Comprehensive benefits: medical, dental, and vision insurance; health savings and flexible spending accounts; life insurance; disability options; retirement savings
- Relocation assistance and paid training provided
Paid time off provided at designated times throughout the year
Qualifications include:
- Experience working or volunteering with youth
- This is a two-person role for couples legally married for at least two years
- Both spouses must be age 27 or older
- No more than three dependent children may reside in the student home
- Commitment to a smoke-free and weapon-free campus; no alcohol permitted while on duty
- Pet limitations: only fish and one dog of approved breeds allowed
- Valid U.S. driver’s license and ability to become certified to drive student home vans
- Comfort leading students in daily devotions and accompanying them to Judeo-Christian Sunday Chapel services (proselytizing prohibited)
- High school diploma or GED required
- Ability to lift to 50 lbs.
Demonstrated integrity and professionalism; MHS staff serve as role models for students
This is a unique, challenging, and rewarding career and life choice that requires a high level of commitment to student success from both spouses. For consideration, both spouses must complete individual employment applications. To learn more and apply, visit
permanent
F
Side Hustle Specialist (Evenings & Weekends)
$300-$1,200 per month (part-time) - monthly
We’re seeking dependable individuals who want to build a side income alongside their full-time work. This role offers flexible tasks you can perform outside your regular job hours. You’ll be given structured guidance and tools to identify side hustles that complement your main job, without conflict or burnout.
Responsibilities:
Work through curated side-hustle ideas and evaluate which suit your skills and schedule
Test and implement methods to generate extra income (e.g. remote tasks, micro-projects)
Track your time and earnings; maintain simple reports
Adjust your workflow and focus on the side hustles that deliver the best return
Requirements:
Must have a full-time job already (or other main commitment)
Reliable internet access and a device (laptop, tablet or smartphone)
Basic organization skills and ability to work independently
Willingness to learn and experiment
Preferred Qualities:
Self-motivated
Good at managing time
Comfortable trying new things
Able to commit a few hours each week
Benefits:
Work on your own schedule (evenings/weekends)
Low risk; minimal overhead
Opportunity to scale income over time
Support and guidance provided
temporary
jobs by
✓ All jobs loaded