Engineering Structures Jobs in Milton Washington

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Job Description

The Boeing Commercial Airplanes Liaison Engineering Organization is seeking Consultant (Level 5) Liaison Engineers to support operations in Everett, Seattle, Auburn, and or Renton Washington . We are looking for a proactive individual who can make prompt engineering decisions and who want to go beyond their desk and into the factory for hands on engineering.

This position requires excellent communication and collaboration skills as the candidate will be partnering closely with production personnel. The candidate will be the engineering representative on the factory floor transforming design into reality.

Position Responsibilities: 

• Analyzes, conducts root cause analysis and develops dispositions for production non-conformances.
• Applies knowledge of Boeing design principles to assess and resolve product/process issues through the product lifecycle.
• Applies engineering principles to research technical, operational and quality issues in support of executing final engineering solutions.
• Identifies documents, analyzes reported problems and communicates deviations that could impact design intent and safety; recommends and manages resolution.
• Develops and implements product/process improvements.
• Supports Integrated Product Teams (IPT) and participates in design reviews.
• Represents the engineering community from initial build through the production and post-production environment.
• Ensures supplier and build partner compliance with Boeing standards.
• Develops customer correspondence for continued safe operation and maintenance of equipment.
• Participates in on-site disabled product repair teams, accident investigation and support teams.
• Analyzes damage repair or structural modification to determine appropriate jacking and shoring, prevent collateral damage and assure a safe work environment.
• Designs interim structural repairs and conducts static strength analysis.
• Develops non-destructive test procedures, tools and standards.

This position is fully onsite. The selected candidate will be required to work onsite at one of the listed locations. This position involves daily exposure to factory environment which includes stairs, trip hazards, high noise areas, chemical hazards (breathing and handling), and entering airplanes during their many stages of build.

This position participates in the approximately 9-month Boeing Company Training Rotation Program, which may involve assignments to the first, second, or third shift, as well as weekend or daily overtime. The specific requirements for shift assignments and overtime vary between sites and are typically covered on a rotation basis. Additionally, there may be travel involved between Boeing Puget Sound sites during the training rotation.

Basic Qualifications (Required Skills/Experience): 

• Bachelor's or Masters of Science Degree from an ABET OR ABET equivalent accredited course of study in Engineering
• 14+ years of experience in structures, systems, design, or production engineering

Preferred Qualifications (Desired Skills/Experience): 

• Hands-on experience with materials and manufacturing processes.
• Prior BCA Engineering Material Review Board (MRB) Certification

Conflict of Interest:

 Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment 
process

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Shift:

This position is for multiple shifts and may require off shift, weekend, and travel assignments.

The candidate may periodically be assigned to first, second, or third shift as well as weekend or daily overtime. This requirement varies from site to site and is typically covered on a rotation basis.

Union:

This is a union represented position.

In locations where SPEEA representation applies, this job family will be covered by the terms of the collective bargaining agreement. Applicable and appropriate educational/certification credentials from an accredited institution and/or equivalent experience is required.

 

Pay and Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

• Summary pay range for Expert (level 5): $165,750 - $224,250

Applications for this position will be accepted until Mar. 20, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.

We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.Boeing Defense, Space & Security (BDS) is seeking a Front-Line Production & Test Engineering Manager to lead production, assembly, and verification of custom-designed and fabricated printed circuit boards (PCBs) and Line Replaceable Units (LRUs) for the Electronic Products and Design (EPD) team in Kent, WA .This role combines hands-on technical expertise with people-first leadership in which you will help build and mentor cohesive, cross-functional teams that deliver safe, reliable flight hardware.

The successful candidate is collaborative, values open communication, and actively develops teammates by sharing knowledge, coaching on best practices, and promoting a culture of continuous learning and respect.

You will partner with engineering, manufacturing, quality, and supply chain leads to remove obstacles, align priorities, and drive predictable outcomes while fostering an inclusive environment where team members feel empowered to raise issues, propose improvements, and contribute to long-term product and process excellence.Position Responsibilities:Manages employees performing engineering and technical activities in the areas of Electronic and Electrical Engineering.Develops and executes project and process plans, implements policies and procedures, and sets operational goals.Acquires resources for projects and processes, provides technical management of suppliers, and leads process improvements.Develops and maintains relationships and partnerships with customers, stakeholders, peers, partners, and direct reports.Provides oversight and approval of technical approaches, products, and processes.Manages, develops, and motivates employees.This position is expected to be 100% onsite.

The selected candidate will be required to work onsite at the listed location.Basic Qualifications (Required Skills/Experience):Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement.5+ years of experience in engineering.Preferred Qualifications (Desired Skills/Experience):Bachelor's degree in Aerospace, Mechanical, Electrical Engineering, or related technical field; advanced degree preferred.Experience with PCB design for flight hardware: understanding of multi-layer board stack-ups, controlled impedance, high-speed signal integrity, differential pair routing, and power distribution network design.Knowledge of PCB fabrication and assembly processes: board fabrication technologies, via types (through-hole, blind/buried, microvias), copper plating, soldermask/legend, and surface finish options.Experience specifying and qualifying PCB suppliers and contract manufacturers: supplier audits, capability assessment, lead-time negotiation, and transfer of design data to manufacturers with clear assembly/inspection requirements.Understanding of assembly considerations: pick-and-place constraints, component footprint validation, stencil design, solder paste processes, reflow profiles, and wave/hand soldering where applicable.Proficiency in manufacturing documentation and process control for PCB production: creation/review of assembly drawings, process work instructions, soldering procedures, rework guidelines, and in-process inspection criteria.Effective communication and stakeholder management skills: able to coordinate across design engineering, manufacturing, test, supply chain, and quality teams.Demonstrated familiarity with quality and manufacturing systems such as AS9100, ISO standards, and corrective action processes.Practical understanding of test methods and instrumentation (functional test, environmental, vibration, thermal vacuum, EMI/EMC) and data acquisition/analysis tools.Experience with production processes: assembly work instructions, tooling, fixtures, tolerance stack-up, process capability and manufacturing principles.Proven ability to read and interpret engineering drawings, specifications, and BOMs; familiarity with configuration management and technical documentation control.Proficiency with manufacturing/test software tools and basic data literacy for KPI tracking.Ability to plan, budget, and schedule production/test activities, including resource allocation and risk mitigation for on-time delivery.Conflict of Interest:Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Pay & Benefits:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.Summary pay range: $151,300
- $204,700Applications for this position will be accepted until Mar.

31, 2026Export Control Requirements:This position must meet U.

S.

export control compliance requirements.

To meet U.

S.

export control compliance requirements, a "U.

S.

Person" as defined by 22 C.

F.

R.

§120.62 is required.

"U.

S.

Person" includes U.

S.

Citizen, U.

S.

National, lawful permanent resident, refugee, or asylee.Export Control Details:US based job, US Person requiredEducationBachelor's Degree or Equivalent RequiredRelocationRelocation assistance is not a negotiable benefit for this position.Security ClearanceThis position requires the ability to obtain a U.

S.

Security Clearance for which the U.

S.

Government requires U.

S.

Citizenship.

An interim and/or final U.

S.

Top Secret Clearance Post-Start is required.Visa SponsorshipEmployer will not sponsor applicants for employment visa status.ShiftThis position is for 1st shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.

We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.Boeing is seeking an experienced and dedicated Software Certification Engineer to lead our engineering team in the critical mission of developing and certifying safe, reliable, and innovative aircraft.

This role is paramount in ensuring that our aircraft not only meet but exceed the rigorous safety standards set forth by the Federal Aviation Administration (FAA).

The Software Certification Engineer will play a vital role in fostering a culture of safety and excellence, making significant contributions to the certification process that underpins the trust of our customers and the flying public.Why This Role is Important:The Software Certification Engineer is a cornerstone of Boeing's unwavering commitment to safety and excellence in aviation.

This role is crucial in ensuring that our aircraft not only meet the regulatory standards set by the FAA but also embody the highest levels of safety and reliability.

By partnering closely with the FAA, the Software Certification Engineer will help shape the future of aviation, driving innovation while safeguarding the trust of our customers and the flying public.Join us in our mission to connect, protect, explore, and inspire the world through aerospace innovation.

Apply today to be part of a team that is dedicated to setting the standard for safety and excellence in the aerospace industry!Position Responsibilities:Lead and manage a team of engineers focused on the design, analysis, and testing of aircraft systems and components, with an unwavering commitment to safety.Cultivate a safety-first mindset within the engineering unit, ensuring that all engineering practices prioritize the well-being of passengers and crew.Collaborate closely with the FAA to navigate the complex certification process, ensuring that all aircraft designs comply with stringent regulatory requirements and safety standards.Develop and implement engineering strategies that emphasize safety and reliability, aligning with Boeing's commitment to delivering the highest quality aircraft.Serve as the primary liaison for FAA representatives, facilitating transparent communication and collaboration throughout the certification journey.Oversee the preparation and submission of comprehensive technical documentation required for FAA certification, ensuring that all materials reflect the highest standards of accuracy and thoroughness.Mentor and develop engineering staff, instilling a deep understanding of safety protocols and certification processes to enhance their professional growth and technical expertise.Analyze and resolve complex engineering challenges with a focus on safety, leveraging data-driven decision-making and industry best practices.Monitor project progress and performance, ensuring that engineering solutions are delivered on time and meet all safety and certification milestones.This position is expected to be 100% onsite.

The selected candidate will be required to work onsite at one of the listed location options.This position must meet export control compliance requirements.

To meet export control compliance requirements, a "U.

S.

Person" as defined by 22 C.

F.

R.

§120.15 is required.

"U.

S.

Person" includes U.

S.

Citizen, lawful permanent resident, refugee, or asylee.Basic Qualifications (Required Skills/Experience):Bachelor's Degree5+ years of experience as a Designated Engineering Representative (DER) or Technical Standard Order (TSO) Certification Specialist.9+ years of experience in RTCA DO-178(B/C) Software Considerations in Airborne Systems and Equipment Certification5+ years' experience in software engineeringPreferred Qualifications (Desired Skills/Experience):Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science12+ years related work experience or an equivalent combination of education and experienceCurrent Designated Engineering Representative (DER) or Technical Standard Order (TSO) Certification SpecialistExperience with concurrent software and distributed systems12+ years' experience in software development life cycles, configuration management and best agile software engineering practices9+ years' experience developing, documenting and maintaining architectures, requirements, algorithms, interfaces and designs for software systems9+ years' experience leading software development projectsLeads activities to develop, document and maintain architectures, requirements, algorithms, interfaces and designs for software systemsLeads development, selection, tailoring and deployment of processes, tools and metricsExperience using common software version control tools such as GitExperience with Agile planning tool such as JIRA, TSFDrug Free Workplace : Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union : This is a union-represented positionPay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.Summary Pay Range – Level 4 (Senior)
- $136,850
- $185,150Summary Pay Range – Level 5 (Lead)
- $167,450
- $226,550Applications for this position will be accepted until Mar.

24, 2026Export Control Requirements:This position must meet U.

S.

export control compliance requirements.

To meet U.

S.

export control compliance requirements, a "U.

S.

Person" as defined by 22 C.

F.

R.

§120.62 is required.

"U.

S.

Person" includes U.

S.

Citizen, U.

S.

National, lawful permanent resident, refugee, or asylee.Export Control Details:US based job, US Person requiredEducationBachelor's Degree or Equivalent RequiredRelocationThis position offers relocation based on candidate eligibility.Visa SponsorshipEmployer will not sponsor applicants for employment visa status.ShiftThis position is for 1st shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.

We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.Boeing's Phantom Works is seeking an AC5 Chief Engineer – Phantom WorksThe AC5 Chief Engineer will lead the technical direction and engineering personnel of the Advanced Communications, Computing, Cyber, Command and Control (AC5) portfolio within the Phantom Works Tech Base division.

The position will direct the AC5 Thrust leads in setting technical strategies and roadmaps for air and space technology development, and report to the Phantom Works Systems Engineering Capability Leader.You will lead an IPT spanning multiple functions including supply chain, IP&S, Quality / Supplier Quality, Production Engineering, Design Eng, Liaison Eng, Operations, and Materials & Processes to develop software and hardware prototypes conducting command and control across air, space, maritime, and land domains.

You will provide technical direction over AC5's sub-portfolios of advanced command and control, advanced mission planning, advanced communications, and advanced computing.

Additionally, you will be Phantom Works' multi-domain advocate across the BDS divisions, providing education and alignment on the DAF's Battle Network, DON's Project Overmatch, DOA's Project Convergence, and USSF's KRONOS.This role is an excellent opportunity to further develop your leadership and visioning skills as you will set and lead a team in successful execution of a long-term long range kill chain objectives.

You will gain valuable experience working with the various functions who all support production of major aircraft assemblies as well as interacting with and managing large external suppliers.

You will be called upon to brief and provide status to program executive leadership team, Do D, and Service customers.Your initial responsibilities will be to execute programs within the IPT, lay out a growth plan, lead program make/buy decisions, and provide technical direction to the overall programs.Position Responsibilities:Integrate air and space platforms into Department‐level system‐of‐systems architectures across the DAF, Navy, and ArmyDefine and execute systems engineering strategy, technical roadmaps, and integrated plans that advance program milestones and TRLsAdvocate for R&D and IRAD investments to advance Boeing's discriminator technologiesProvide technical direction and leadership for a team of ~75 engineers across multiple programsOversee supplier technical performance and ensure engineering artifacts meet Boeing and customer standardsDrive process improvements to reduce schedule slip and technical riskEnsure effective collaboration with internal stakeholders, customers, and partnersFoster an inclusive, psychologically safe work environment that emphasizes safety, quality, innovation, and transparent communicationThis position is expected to be 100% onsite.

The selected candidate will be required to work onsite at Colorado Springs, CO, St Louis, MO, and/or Seattle, WATravel may be required up to 25% of the time; Domestically depending on business needs.This position requires the ability to obtain a U.

S.

Top-Secret Security Clearance for which the U.

S.

Government requires U.

S.

Citizenship.

An interim and/or final U.

S.

Top Secret/SCI Clearance Post-Start is required.Basic Qualifications (Required Skills/Experience):Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement1-2 years of experience with the space domain10+ years of engineering experience with 5+ years in program or people leadershipProven product development and systems engineering experience across lifecycle phasesExperience with joint all-domain command and control conceptsPreferred Qualifications (Desired Skills/Experience):Ability to obtain TS/SCI Clearance3-5 years of experience with the space domainExperience with Air and Space platform AIT/development and Do D customers (DAF, Navy, Army)Demonstrated record capturing and executing R&D/IRAD projects and transitioning technology to programs of recordPrior exposure to MBSE and digital engineering tools and model‐based workflowsStrong written and verbal communication skills and experience managing high‐performance teamsConflict of Interest:Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Total Rewards:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings.

Our best-in-class retirement benefit features:

Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vestingStudent Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.

S.

employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.Summary pay range: $141,100
- $204,700Applications for this position will be accepted until Mar.

20, 2026Export Control Requirements:This position must meet U.

S.

export control compliance requirements.

To meet U.

S.

export control compliance requirements, a "U.

S.

Person" as defined by 22 C.

F.

R.

§120.62 is required.

"U.

S.

Person" includes U.

S.

Citizen, U.

S.

National, lawful permanent resident, refugee, or asylee.Export Control Details:US based job, US Person requiredEducationBachelor's Degree or Equivalent RequiredRelocationThis position offers relocation based on candidate eligibility.Security ClearanceThis position requires the ability to obtain a U.

S.

Security Clearance for which the U.

S.

Government requires U.

S.

Citizenship.

An interim and/or final U.

S.

Top Secret/SCI Clearance Post-Start is required.Visa SponsorshipEmployer will not sponsor applicants for employment visa status.ShiftThis position is for 1st shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.

We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.The Boeing Defense, Space & Security (BDS) organization is seeking a Senior Systems Software Engineer to join the P-8 Missions System Software Engineering team in Kent, Washington .The P-8 Mission Systems Software Operating Systems (OS) team needs a strong software architect on-site to lead a variety of products including the Virtual Integration Platform (VIP).The P-8 Poseidon program is the premier Anti-Submarine Warfare (ASW) platform for the US Navy and several international partners.

Candidates will belong to an Agile software engineering development team that supports operating system, hardware, platform, and application development.This engineer shall lead, oversee, and direct design, development, analysis, and maintenance of software systems, possess applicable domain experience, and work with internal and external teams across the P-8 Program to support Operating Systems development.

Duties include but are not limited to: developing requirements, creation of design documentation inputs/formatting, technical coordination/cross-training, software development, and software validation and testing.Position Responsibilities: Lead and oversee the design, architecture, development, and maintenance of P-8 Operating Systems products including the Virtual Integration Platform (VIP) and P-8 Trainer variantsLead and oversee the design, architecture, prototyping, and development of mission computing and software modernizationPartner with software and hardware stakeholders to inform system definition and oversees translation of system-level requirements into software requirements to meet Navy customer capability requestsProvide cross-team architecture level guidance for P-8 Mission Systems Software including estimation of new business and opportunitiesMentor junior engineers and provide cross-training within the team by implementing and documenting standard design, test, and execution processes and procedures for the OS and VIPsBasic Qualifications (Required Skills/ Experience):Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science10+ years of experience with C, C++, C#, Python, Java, or AdaExperience with requirements analysis, management, and decompositionExperience with standard engineering tools such as MBSE/PLE, Cameo, DOORS and common collaboration tools (Jira, Confluence, Git)Preferred Qualifications (Desired Skills/Experience):20+ years related work experience or an equivalent combination of technical education and experienceAdvanced degree (MS/Ph D) in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer scienceExperience with mission systems, avionics, command & control architectures, embedded systems, sensor systems, or related defense/space programs.Prior work on software-in-the-loop, hardware-in-the-loop, flight test, or distributed system integration.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Code Vue Coding Challenge:To be considered for this position you will be required to complete a technical assessment as part of the selection process.

Failure to complete the assessment will remove you from consideration.Total Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.Summary pay range: $190,400-$257,600Applications for this position will be accepted until Mar.

26, 2026Export Control Requirements:This position must meet U.

S.

export control compliance requirements.

To meet U.

S.

export control compliance requirements, a "U.

S.

Person" as defined by 22 C.

F.

R.

§120.62 is required.

"U.

S.

Person" includes U.

S.

Citizen, U.

S.

National, lawful permanent resident, refugee, or asylee.Export Control Details:US based job, US Person requiredEducationBachelor's Degree or Equivalent RequiredRelocationRelocation assistance is not a negotiable benefit for this position.Security ClearanceThis position requires an active U.

S.

Secret Security Clearance (U.

S.

Citizenship Required).

(A U.

S.

Security Clearance that has been active in the past 24 months is considered active)Visa SponsorshipEmployer will not sponsor applicants for employment visa status.ShiftThis position is for 1st shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Numerical Control Programmer

Auburn, WA

6+ Months Contract

Primary Responsibilities

• Create, verify, and revise Machine Control Data (MCD), tooling geometry, and setup documentation for multi-axis CNC machines (primarily 5-axis).

• Interpret engineering drawings, planning documentation, and manufacturing requirements to develop robust NC programs for aluminum and hard-metal parts.

• Develop multiple setups and operations for complex part geometries, ensuring fixturing, tooling, and machine selection support producibility and tolerances.

• Produce clear setup sheets and operator instructions that enable consistent and safe machine operation.

• Use simulation/verification tools (e.g., Vericut) to validate programs and eliminate collisions or gouges prior to shop-floor execution.

• Troubleshoot and iterate programs based on first-article inspections, in-process feedback, and shop-floor testing.

• Coordinate with planning, manufacturing engineering, tooling design, and machine operators to optimize cycle times, reduce scrap, and address manufacturability concerns.

• For Level 4: Lead the design of custom fixtures and complex tooling arrangements and define machining strategies across multiple operations and machines.

• Maintain program documentation, revisions, and configuration control per company/contract requirements.

• Work under minimal direction.

Required Skills

• 7+ years of NC programming experience for production machining or equivalent combination of education and experience.

• Demonstrated experience programming 5-axis CNC machines for aerospace parts (aluminum and hard metals).

• Proficiency reading and interpreting engineering drawings, GD&T, and manufacturing documentation.

• Proficient in CATIA V5 NC programming.

• Proficient in NC simulation/verification tools such as Vericut.

• Ability to create clear setup documentation and operator instructions.

• Able to work 2nd shift schedule as specified.

• Contractor eligibility to work under the terms of the engagement.

Preferred Qualifications

• Prior experience creating custom fixtures and tooling for multi-setup machining operations

• Experience defining machining strategy and selecting appropriate machines and processes for part families.

• Familiarity with aerospace manufacturing processes, inspection practices, and first-article requirements.

• Strong problem-solving skills with a track record of reducing cycle times or improving producibility.

• Effective communicator with experience collaborating across planning, engineering, and shop-floor teams.

• Experience with additional CAM systems or post-processors commonly used in aerospace environments.

Education / Experience:

Education/experience typically acquired through advanced education (e.g. Associate) and typically 6 or more years' related work experience or an equivalent combination of education and experience (e.g. Bachelor+4 years' related work experience, 8 years' related work experience, etc.).

Job ID: 518169

Exempt

Oldcastle Infrastructure™, a CRH company, is the leading provider of utility infrastructure solutions for the water, energy, and communications markets throughout North America. We’re more than just a manufacturer of precast concrete, polymer concrete, or plastic products. We’re a trusted and strategic partner to engineers, contractors, distributors, specifiers, and more. With our network of more than 80 manufacturing facilities and more than 4,000 employees, we’re leading the industry with innovation and a safety-first mindset.

Job Summary

The Plant Manager is the senior leader on site and is responsible for everything that goes on inside the fence-line and is the driver of the production process. We look to the Plant Manager to build a collaborative environment between operations, sales, engineering, accounting, and transportation. This dynamic leader will be pushing continuous improvement in workplace safety, production efficiency, product cost, and customer service.

Job Location

• This role will be on site at our facility in Auburn, WA.

Job Responsibilities

• Ensure the plant employees and guests on site comply with safety and environmental practices – lead by example and build a safety first culture
• Lead production scheduling to meet customer needs including timely delivery
• Develop a keen focus on customer service and proactive communication across the team
• Partner with the engineering team to ensure proper drawings and designs are being used during the manufacturing process
• Purchase material/services to successfully operate the facility
• Successfully hire, supervise, orient, train and retain operations/product staff
• Promote and maintain a clean workplace that is “tour-ready” at all times
• Ability to read drawings, plan production tasks from those drawings, and coach employees to produce product correctly
• Ability to operate some of the standard tools on the plant floor such as overhead cranes, hand tools, batch plant, etc. While the Plant Manager will not be asked to operate these things continuously, having some of these skills will make him/her a better coach and troubleshooter
• Be a leader and coach leadership. Motivate crews during morning huddles. Lead effective Mid-Day meetings. Coach Leads on how to set expectations on a whiteboard and have them followed. Lead inventory counts. Promote safety best practices in meetings with other Plant Managers
• Perform any other duties as assigned by the General Manager as deemed appropriate and necessary by them

Job Requirements

• Bachelor's Degree in Business, Operations, Engineering or equivalent experience
• 10+ years of experience working in a leadership role in an industrial manufacturing environment
• Experience with precast/concrete or building materials is a plus
• Proven track record of developing, leading and maintaining a continuous improvement mindset at the plant
• Ability to work on your feet for the majority of the day in a production/plant environment subject to areas that are unheated and/or non-air conditioned
• Ability to work with computer as necessary (Microsoft Word, Excel, PowerPoint, AX)
• Ability to lead and direct other individuals and work with other group leaders

Compensation

• Yearly target salary is $130, ,000.00
• Yearly target bonus of 15%
• Vacation hours of two weeks per year
• Sick leave benefits up to 56 hours per annum
• 401k plan
• Short-Term and Long-Term Disability benefits
• Eleven paid holidays per year
• Annual Community Volunteer paid day

What CRH Offers You

• Highly competitive base pay
• Comprehensive medical, dental and disability benefits programs
• Group retirement savings program
• Health and wellness programs
• An inclusive culture that values opportunity for growth, development, and internal promotion

About CRH

CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization.

If you’re up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest!

Oldcastle Infrastructure, a CRH Company, is an Affirmative Action and Equal Opportunity Employer.

EOE/Vet/Disability

CRH is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law.

Prospect Construction is a Heavy Civil Contractor that specializes in water and wastewater treatment plants, hydraulic structures/facilities, shoring systems, large concrete tanks, pump stations/process facilities, dewatering, major excavations, structural steel, process equipment, and mechanical systems. Prospect began as a General Contractor in 1998, with our first office location in Puyallup Washington. Over the last few decades, Prospect has coupled its expertise in complex projects with its vast level of self-performance to grow into one of the premier treatment plant contractors in the West. This continued growth has allowed Prospect to bring our expertise into new geographical regions, with the establishment of our offices in Missoula, Montana and Sheridan, Wyoming.

Why do we exist? Prospect Construction seeks to glorify God by providing opportunities for our employees to utilize their unique gifts through construction to benefit and serve our families, stakeholders, and community. What do we do? We construct unique, complex, and challenging projects for our clients throughout the west.

Description Summary:

The Chief Heavy Civil Estimator is responsible for leading the company’s heavy civil estimating strategy, execution, and team development across all offices. This role will oversee a group of estimators operating from a centralized estimating location and will support bids for projects throughout the company’s footprint.

This position is a key leadership role in expanding the company’s heavy civil capabilities into new and existing markets including dams and water resource infrastructure, mass grading, mining support infrastructure, underground utilities, pipelines, and large-scale site development. The Chief Heavy Civil Estimator will produce accurate, complete, and competitive estimates and will build repeatable estimating systems that drive profitable growth.

Essential Duties and Responsibilities for Civil Estimator:

• Lead and manage a team of estimators responsible for heavy civil bids across all offices.
• Assign estimating responsibilities, coordinate workloads, and ensure bid schedules are met.
• Develop and mentor estimating staff through coaching, training, and performance feedback.
• Establish clear estimating workflows, standards, review processes, and deliverables.
• Lead preparation of competitive and complete estimates for heavy civil and large development pursuits.
• Perform detailed quantity takeoffs, pricing, labor and equipment productions, and bid-leveling.
• Develop pricing strategies and collaborate with leadership to determine bid markups, general conditions, contingency, and schedule impacts.
• Coordinate bid reviews and executive-level presentations prior to submission.
• Support expansion into new heavy civil markets and project types including:
• Dams / levees / water infrastructure
• Mass grading / earthwork
• Mining and mine infrastructure
• Wet and dry utilities
• Pipeline – Water/Sewer/Oil/Gas
• Large developments and site infrastructure
• Build estimating models, assemblies, means-and-methods assumptions, and productivity benchmarks for emerging work types.
• Identify equipment needs, subcontractor requirements, and labor production assumptions to support new civil capabilities.
• Ensure all estimates include complete scope coverage, clear assumptions, and appropriate risk allocation.
• Identify project risks and opportunities including logistics, access, production constraints, seasonal impacts, and design ambiguities.
• Support constructability reviews and sequencing concepts that align with execution strategies.
• Ensure the bid complies with owner requirements, bid forms, and proposal instructions.
• Solicit subcontractor pricing and scope input for specialty work (dewatering, drilling, blasting, shoring, etc.).
• Evaluate subcontractor quotes for completeness and accuracy; manage bid leveling and scope alignment.
• Assist in development of strategic partnerships for emerging markets and scopes.
• Maintain and improve a heavy civil cost database including labor, equipment, materials, trucking, and subcontractor benchmarks.
• Track estimate performance and contribute to lessons learned based on job cost results and field feedback.
• Coordinate with operations, project management, and field leadership to validate means/methods and production assumptions.
• Participate in turnover meetings and support transition from bid to execution.
• Assist operations in early project planning, budgeting, and buyout strategy as needed.

Knowledge & Skills:

• Minimum of 10 years of experience as a Civil Construction Estimator
• Proven experience leading estimating efforts on complex heavy civil projects
• Demonstrated success managing or mentoring estimators and leading bid teams.
• Strong understanding of:
• Heavy civil means and methods
• Equipment spreads and production rates
• Construction scheduling impacts
• Labor, trucking, and material pricing models
• Risk management and bid strategy
• Advanced understanding of data analysis methods
• Familiarity with civil estimating computer software
• Ability to interpret civil plans, specs, geotechnical reports, contract terms and design documents
• Strong written and verbal communication skills and ability to present to senior leadership
• Highly organized, deadline-driven, and capable of managing multiple concurrent pursuits
• Critical-thinker and problem-solver
• BA in engineering, construction science or similar relevant field
• Experienced with HCSS and Timberline estimating software

Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.

We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.Boeing Defense, Space and Security (BDS), is looking for an Associate or Mid-Level SAR Signal & Image Processing Engineer (Level 2 or 3) to join the Kent Space SEIT team located in Kent, WA (Seattle, WA) .

This position will focus on developing radar analysis and algorithms in a mission-critical environment that directly empowers our defensive capabilities.

You will develop and validate requirements for Synthetic Aperture Radar (SAR) systems, perform trade studies, design and run tests to verify performance, support engineering compliance, and provide lifecycle root-cause analysis.

Work is performed under general direction with contributions to proposals as needed.

This role emphasizes algorithm design and software implementation: develop and evaluate radar algorithms (signal and image processing, detection, tracking, imaging) and translate them into production-ready code.

Proficiency in Python or C++ for algorithm development, prototyping, and data analysis is required; experience with signal and image processing toolsets, real-time software constraints, requirements tracing, and test-program design is highly valued.

Strong analytical, communication, and customer-focused skills with a commitment to quality and safety are essential.Position Responsibilities: Develop, implement, and test radar algorithms and translate analytic designs into production-ready code using Python (and other languages as needed) Perform trade studies to evaluate algorithm and system performance; iterate designs based on results and test data Participate in customer meetings, capture requirements and feedback, and provide technical support for operational tools and deployments.

Support agile software development practices: write user stories, participate in sprints, review code, and deliver incremental capability updates.

Define and execute test plans, perform root-cause analysis of anomalies, and coordinate with suppliers and cross-functional teams to ensure requirements compliance.

Basic Qualifications (Required Skills/Experience): Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement Requires an active Do D Top Secret Clearance 2+ years of relevant experience in radar systems, electromagnetic analysis, or related fields, including algorithm development and system-level testing.

1+ years' experience with Python, C++, C, or Matlab for algorithm development, prototyping, and data analysis; experience with signal processing toolsets and simulation environments Demonstrated ability to derive and trace requirements, DEVELOP test CASES, and collaborate across multidisciplinary engineering teams Willing to travel domestically as needed (~10%) Preferred Qualifications (Desired Skills/Experience): Active TS/SCI Advanced degree (MS or Ph D) in Electrical Engineering, Physics, Applied Math, or related field with focus on radar or electromagnetics.

Experience with real-time software architectures and implementation (C/C++, RTOS, or embedded systems).

Prior work on radar signal processing algorithms (detection, tracking, SAR/ISAR, waveform design) or electronic warfare techniques.

Familiarity with MATLAB/Simulink, Num Py/Sci Py, and signal-processing libraries and toolchains.

Hands-on experience with test-range operations, hardware-in-the-loop (HIL), and flight or ground test campaigns.

Knowledge of requirements management tools, model-based systems engineering (MBSE), and supplier/partner integration processes.

Experience working in an Agile software development environment and Dev Ops methodologies Drug Free Workplace: Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Coding Challenge: To be considered for this position you will be required to complete a technical assessment as part of the selection process.

Failure to complete the assessment will remove you from consideration.Pay and Benefits :At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.Associate (Level 2) Summary Pay Range: $98,600
- $133,400Mid-Level (Level 3) Summary Pay Range: $119,850
- $162,150Applications for this position will be accepted until Mar.

27, 2026Export Control Requirements:This position must meet U.

S.

export control compliance requirements.

To meet U.

S.

export control compliance requirements, a "U.

S.

Person" as defined by 22 C.

F.

R.

§120.62 is required.

"U.

S.

Person" includes U.

S.

Citizen, U.

S.

National, lawful permanent resident, refugee, or asylee.Export Control Details:US based job, US Person requiredEducationBachelor's Degree or Equivalent RequiredRelocationRelocation assistance is not a negotiable benefit for this position.Security ClearanceThis position requires an active U.

S.

Top Secret Security Clearance (U.

S.

Citizenship Required).

(A U.

S.

Security Clearance that has been active in the past 24 months is considered active)Visa SponsorshipEmployer will not sponsor applicants for employment visa status.ShiftThis position is for 1st shiftContingent Upon Program RewardThe position is contingent upon program awardEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.