Engineering Structures Jobs in Milton Washington

• Leading the Naval network warfare missions in developing tactics and procedures to realize tactical, strategic and business advantages afloat and ashore
• Driving interoperability with joint, allied and coalition partners
• Building professional excellence through education, training and certification and milestone qualifications
• Optimizing organizational effectiveness through cutting-edge technologies, knowledge management techniques and a culture of innovation
• Helping to develop and deploy information systems, command and control and space systems
• Serving as a key part of the Information Dominance Corps in its mission to gain a deep understanding of the inner workings of adversaries
• Overseeing the work of Information Systems Technicians - Enlisted Sailors (no degree required) who serve as specialists in information technology

• Serving as part of Battle Group staffs on ships at sea
• Working in C4I/Space/Surveillance on shore tours
• Serving on major Navy and joint staffs
• Serving in command of key communication and surveillance facilities around the globe

• Pursuing opportunities at institutions such as Naval Postgraduate School (NPS) or Navy War College (NWC)
• Completing Joint Professional Military Education (JPME) at one of the various service colleges

Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.

We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.Job Description Qualifications: The P-8 Mission Systems Integration & Test team in Kent, WA.

is seeking a Systems Engineer Support Analyst with P-8 Poseidon experience.

We are looking for candidates that have operational experience functioning as a Tactical Coordinator (TACCO) to help test and improve the quality and capability of the P-8 Mission Systems software products and deliver the best possible solutions to our customers.Primary Responsibilities:Develop P-8 Mission Systems scenario test procedures to be executed in our Weapons Systems Integration Lab or International Systems Integration Lab.Execute P-8 Mission Systems scenario test procedures in our Weapons Systems Integration Lab or International Systems Integration Lab serving as the TACCO.Identify and document defects (non-compliance to software requirements or usability) found within the Mission Systems software or avionics suite.Support systems-level integration and test activities of the P-8 Mission Systems and avionics suite.Support the Mission Systems software development team by providing recommendations on integrating new functional capabilities or resolving defects.This position will be 100% onsite in Kent, WAThis position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship.

An interim and/or final U.

S.

Secret Clearance Post-Start is required.Basic Qualifications (Required Skills & Experience):5 or more years of related work experience or an equivalent combination of technical education and experience with 2+ years of experience as a Tactical Coordinator or Co-Tactical Coordinator on a P-8 aircraft.Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, engineering technology, computer science, engineering data science, mathematics, physics or chemistry.

In the USA, ABET accreditation is the preferred, although not required, accreditation standard.Preferred Qualifications (Desired Skills & Experience):8 or more years of related work experience or an equivalent combination of technical education and experience.3+ years of experience as a Tactical Coordinator or Co-Tactical Coordinator on a P-8 aircraft.Experience operating in a laboratory environment.Experience with Software Trouble Reports.Familiarity with Agile Software Development principles.Weapons school experience.Experience with the Advanced Airborne Sensor (AAS).Current Do D Secret or Higher security clearance.Relocation:This position does offer relocation.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Shift:This position is for 1st shift.

Occasional alternative shifts as needed.Pay & Benefits:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.Summary Pay Range:Level 3: $106,250-$143,750Level 4: $130,900-$177,100Applications for this position will be accepted until Apr.

06, 2026Export Control Requirements:This position must meet U.

S.

export control compliance requirements.

To meet U.

S.

export control compliance requirements, a "U.

S.

Person" as defined by 22 C.

F.

R.

§120.62 is required.

"U.

S.

Person" includes U.

S.

Citizen, U.

S.

National, lawful permanent resident, refugee, or asylee.Export Control Details:US based job, US Person requiredRelocationThis position offers relocation based on candidate eligibility.Security ClearanceThis position requires the ability to obtain a U.

S.

Security Clearance for which the U.

S.

Government requires U.

S.

Citizenship.

An interim and/or final U.

S.

Secret Clearance Post-Start is required.Visa SponsorshipEmployer will not sponsor applicants for employment visa status.ShiftThis position is for 1st shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Radius Recycling is currently hiring an Environmental Manager in Tacoma, Washington! The EM reports directly to the Sr. Environmental Manager and is responsible for implementation of company policies and procedural plans related to all environmental media, including air, stormwater, groundwater, solid, and/or hazardous waste. The EM maintains regional facilities in compliance with all applicable federal, state, and local environmental laws, standards, and permits; and has responsibility for maintaining facility compliance with applicable environmental permit conditions.

This position has direct responsibility for conducting on-site fieldwork associated with sampling, monitoring, observing, and recording environmental data; and preparing reports, records, and plans required by regulatory permit, plan, or agreement. The EM assists in the overall planning, design, installation, and operation of pollution control equipment and associated metering and/or measuring devices. The EM delivers training programs and provides other advice to management on practical and necessary steps to prevent or abate pollution arising from operations and maintain compliance with regulatory requirements contained within a variety of environmental permits, plans and policies. The EM provides first line immediate environmental emergency responses to incidents, spills, releases, and accidents. The EM provides appropriate notifications to management and appropriate regulatory agencies and assists with site investigations and Remediation projects related to due diligence activities and other identified environmental issues.

This position operates within flexible parameters. The primary goal of this position is to achieve excellence in all facets of environmental management, while providing the highest quality product safely, effectively, efficiently and in compliance with all applicable regulatory Requirements. The EM seeks to decrease the frequency of incidents and errors, compliance deviations and increase profits.

Essential Functions

• Ensures all Company Environmental standards are strictly adhered to.
• Monitors capital projects and provides recommendations for improving environmental controls.
• Encourages reporting of environmental control violations.
• Assists in conducting appropriate training for site personnel as required by local, state, and federal regulations.
• Assists in development and implementation of environmental procedures for all sites.
• Monitors pending legislative and regulatory actions to evaluate the potential impact on operations and develops appropriate response plans to prepare for and ensure compliance.
• Helps provide a safe environment for all employees, customers, and visitors.
• Environmental Management Systems (EMS)
• Ensures all EMS clauses and Requirements are maintained for all ISO 14001:2015 certified sites or those sites that are undergoing EMS implementation and certification.
• Participates in EMS implementation activities at assigned sites and attends all Stage II audits and report outs.
• Participates in the EMS internal auditor program and completes auditor training with 6 months of obtaining the EM role.
• Operational Performance & Best Management Practices
• Spends approximately 50% of time in the field to assist operations staff and other EMs in driving continuous improvement related to environmental compliance programs.
• Prepares and maintains environmental records and reports.
• Ensures investigations and incident analyses are completed to implement necessary corrective actions.
• Assists as requested, in the planning, review and oversight of Remedial actions involving multiple media under various federal, state, and local jurisdictions. Includes developing appropriate work scopes, requesting, and reviewing proposals, selecting consultants & contractors, establishing budgets for management approval, scheduling work in coordination with operations, managing activities to maintain budget and schedule, reporting status and end results to management and regulatory agencies, as necessary.
• Assists in efforts to achieve specific waste reduction/minimization at regional locations.
• Collects, evaluates, and disseminates pertinent information relating to environmental compliance Requirements and maintains appropriate reference files.
• Advises regional management and operating managers concerning the organization's environmental objectives and assists in determining and implementing corrective actions to ensure consistency in company regulatory compliance efforts.
• Recommends changes in procedures, design, or equipment when necessary.
• Represents the organization occasionally at public and/or private discussions including technical forums, regulatory hearings, legal actions, or other public meetings.
• Maintains relationships with outside associations concerned with environmental protection, regulatory officials, and local politicians.
• Assists, as requested, in efforts to develop, plan, and manage environmental investigations associated with past operations and sites being evaluated for acquisition or sale.
• Provides oversight and management of work performed by various consultants and contractors, as well as coordination with both in-house and outside legal counsel.
• Plans, conducts, and/or supervises consultants completing environmental research or other project assignments.
• Performs other related duties as assigned by their assigned Senior EM or environmental operations management.
• Equipment & Maintenance
• Ensures construction plans are reviewed to determine that pollution control considerations are adequate and provides technical supervision for construction and installation of pollution control equipment.

Supervisory Responsibility

Occasional or routine supervisory responsibility for environmental employees designated as the Environmental Technicians, Environmental Systems Control Operators (ESCO), and/or Environmental Analyst. Position includes routine management of engineering contractors, environmental consultants, and other contractors. Supervision of pollution abatement equipment operators may be required as well.

Job Conditions

Office and active field working environment including collection of samples for testing, general information gathering, and project management at various locations. It is necessary to be able to walk/climb in active industrial yards with uneven surfaces and to out-of-the-way areas. Must be comfortable with heights. Occasional exposure to inclement weather conditions and travel is required. Increased time spent involved in environmental issues at sites owned/operated by joint ventures and/or sister companies. Regional and domestic travel required. Position may have to respond to urgent situations on off hours and/or weekends and holidays.

Physical Activities Required To Perform Essential Functions

Ability to lift and carry up to 20 pounds frequently, and up to 50 pounds occasionally; be mobile within an office and field environment; operate an automobile; be mobile to travel frequently by auto and airplane to local and regional locations; climb; negotiate uneven surfaces; sit, stand, and/or walk for extended periods of time; keyboard for up to several hours per day; and communicate in a professional manner in person and by phone. Visual acuity for extensive reading, examining documents, conducting field sampling related activities, operating an automobile, and operating a laptop computer.

Qualifications

Bachelor’s degree with preference for engineering or science background including environmental science, chemistry, geology, or biology. Minimum of four to seven years’ experience with environmental regulations, sampling, testing of air, water, soil, hazardous waste, and other materials. This position requires possession of a valid driver’s license and the ability to drive an automobile.

Preference for person trained or certified in hazardous materials management, hazardous waste handling, site clean-up operations, and/or emergency response. Knowledge of local, state, and federal environmental programs and regulations with approved sampling techniques and procedures. Strong analytical, interpersonal, written, and oral communication skills required. Proficiency with Microsoft Office Suite, environmental management systems, and environmental testing or analytical equipment. Ability to apply principles of logical or scientific thinking to define problems; collect data; establish facts; draw valid conclusions in controlled situations; and read and understand engineering plans and specifications.

PLEASE NOTE: The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required.

All U.S. applicants must be 18 years of age or older and all Canada applicants must be 16 years of age or older.

Radius Recycling participates in e-verify for all U.S. new hires.

An offer of U.S. employment by Radius Recycling or any of its subsidiaries is contingent on the satisfactory completion of a post-offer drug screen and background check.

All new hires must review and sign an Arbitration Agreement. This applies to all U.S. non-union employees.

As an Equal Opportunity Employer, Radius Recycling does not discriminate on the basis of race, religion, color, sex, marital status, disability status, national origin or ancestry, veteran status, age, prior industrial injury, sexual orientation, genetic information, or any other protected status under local, state or federal law.

• Pursuing opportunities at institutions such as Naval Postgraduate School (NPS) or Navy War College (NWC)
• Completing Joint Professional Military Education (JPME) at one of the various service colleges

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

As a crane maintenance mechanic, you will ensure the safety and efficient operation of our cranes, essential equipment for our manufacturing processes.

You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.

Position Responsibilities

• Inspect, maintain, repair, rebuild, retrofit, modify, assemble, disassemble, troubleshoot, analyze, diagnose, calibrate, adjust, and test mechanical systems and or subsystems of all types of cranes such as, but not limited to cab operated, radio controlled, jib type, pendant operated, etc. Know, understand, and work in compliance with SHEA and other applicable codes and regulations for overhead cranes

• Coordinate and work with management, engineering, equipment vendors, and other organizations to analyze equipment design requirements and capabilities.

• Use schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances.

• Determine and/or develop methods where procedures may not be available.

• Devise and make shop aids to facilitate work. Operate and utilize mechanical, test equipment and test systems, precision devices in failure analysis, all forms of predictive/preventative technologies, as required on cranes.

• Operate, use and maintain overhead maintenance work platforms

• Maintain, adjust, install and repair, hydraulic, pneumatic and electric brake system components on cranes and bridges as requires.

• Inspect and maintain building runway rails and expansion joints.

• Maintain mechanical crane and hoist systems including cables, chain, sheaves and hooks.

• Perform the operational tests and load tests of cranes and bridges as required by Engineering, SHEA and other applicable codes and regulations.

• Maintain logs, charts, and perform written and verbal tie-in records.

• Prepare reports and schedules as required.

• Work with and assist employees of other classifications as required.

• Perform work in other classifications when incidental but necessary to the accomplishment of the assignment.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• 2+ Years experience using schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances

• 2+Years experience maintaining mechanical cranes and hoists systems including cables, chain sheaves and hooks.

• This position requires an individual when working at heights to utilize fall protection equipment that has weight limitations.

• Able to lift up to 35 pounds.

Preferred Qualifications:

• Experience inspecting and maintaining building runway rails and expansion joints.

• Preference given to those with 2 years overhead crane experience.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for all shifts

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary pay range: 33.32 – 61.01

Applications for this position will be accepted until May. 29, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Tool & Die Maker to join our Materials Management & Tooling team in Auburn and Renton, Washington.

In this hands-on position, you will be responsible for a variety of tasks, from interpreting blueprints and work orders to developing effective plans for tool fabrication and repair. Your skills will be essential in troubleshooting production challenges, operating advanced machinery, and ensuring that all tools meet stringent quality standards. Collaborating with cross-functional teams, you will also engage with customers and suppliers to address any functional issues, all while adhering to safety protocols and continuous improvement practices. If you are passionate about precision engineering and ready to make a significant impact in a fast-paced environment, we invite you to explore this exciting opportunity.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform all functions related to tool fabrication, rework, and repair as required.

• Obtain work orders from the team leader or supervisor, determining assignments based on schedule dates and tool availability.

• Read work orders and blueprints to identify required tasks, tools, and equipment.

• Develop plans for the fabrication, maintenance, and repair of tools.

• Initiate and coordinate engineering change requests with internal support groups when necessary.

• Determine the sequence of tool fabrication work, troubleshoot issues, and develop solutions to production challenges.

• Access and utilize appropriate tool drawings, models, and specifications using available computing systems.

• Select and verify necessary equipment from the shop storage area, ensuring current tool certification.

• Perform repairs or replacements on tools as per Standing Tool Order (STO) Production Requests, and request rework orders if necessary.

• Layout holes, lines, and other tool features, and install or modify hydraulic, pneumatic, and vacuum tubes as required.

• Operate various machinery, including power saws, drill presses, and CNC machines, to shape materials and prepare details.

• Move materials and equipment using Powered Industrial Trucks (PIT) and overhead cranes as needed.

• Maintain accurate records of orders and coordinate tooling information with other shifts and departments.

• Handle hazardous materials in compliance with Boeing procedures, using appropriate personal protective equipment.

• Engage in continuous improvement practices to enhance quality, safety, and efficiency in tool and die work.

• Use precision measuring instruments, such as micrometers and gauges, to ensure accuracy in fabrication and repairs.

• Interface with customers and suppliers to incorporate changes or resolve functional and installation issues.

• Submit completed jobs to Quality Assurance and assist inspectors in performing necessary checks or measurements.

• Utilize mathematics, including algebra and trigonometry, to calculate dimensions and analyze Model Based Definition (MBD) for fabrication details.

• Conduct tool tryouts and make necessary adjustments to ensure production meets quality requirements and specifications.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications:

• 5+ years of experience in repairing, maintaining, construction, and/or the inspection of tools, dies, jigs, powerfeed, etc.

• 5+ years of experience in machine shop processes, geometric dimensioning & tolerances, and machining capabilities of different types of materials.

• 2+ years of experience using complete set of toolmaker shop equipment (milling, lathe, precision, grinding, polishing, and fitting).

Preferred Qualifications:

• 5+ years of experience as a Tool & Die Maker.

• 2+ years of experience with hydraulics and pneumatics.

• Completed an approved Mold Maker or Tool and Die Maker state apprentice ship program and/or certified by the U.S.

• Ability to perform machining operations with a specified degree of accuracy and within a timely manner, maintain close and exacting tolerances and finish requirements ensuring highest quality workmanship on all tools, gages, and fixtures with minimal scrap.

• Capable of creating a repeatable setup and working to tolerances of +/-.0002" in controlled environment.

• Possesses 4 and 5 axis CNC skills for mill or lathe, and extensive knowledge of detail cutting tool geometry for different cutting tool types and materials.

• Ability to reverse engineer and manufacture mold components within time limitations

• Ability to read and write G and M code with CAM programming experience.

Conflict of Interest:

Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• This position offers relocation based on candidate eligibility.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $40.00/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Jul. 31, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

PRIMARY FUNCTION:

Provides overall management direction for a field project or two or more smaller projects. Project Manager reports to Construction Manager.

TYPICAL DUTIES:

1. Assists Construction Manager with planning, organizing and staffing key field positions through General Superintendent and Executive V.P. of Operations.

2. Establishes individual project objectives, policies, procedures and performance standards within boundaries of corporate policy.

3. Initiates and maintains liaison with prime client and A/E contacts, to facilitate project construction activities.

4. Monitors/controls construction through administrative direction of Project Superintendent to ensure project is built on schedule and within budget; investigates potentially serious situations and implements corrective measures.

5. Represents company in project meetings, assists in labor negotiations/strategy meetings, etc.

6. Manages financial aspects of project contracts (fee payment, rental equipment, income/expenses, etc.) to protect company’s interest and simultaneously maintain good relationship with Client.

7. Assists with development, implementation, and interpretation of project safety and quality control plans.

8. Provides direction to project planning, scheduling, QA/QC, and engineering functions as required.

9. Prepares complete estimates for assigned project(s).

10. Assumes additional responsibilities as directed by corporate executives.

SKILLS, KNOWLEDGE, QUALIFICATIONS, & EXPERIENCE:

Educational and experience requirements include: 4 year engineering or construction management degree, or equivalent, plus extensive (five or more years) experience/knowledge of specialty geotechnical construction, design, finance, and management required. Must be able to apply innovative and effective management techniques to maximize employee performance.  

Thorough understanding of corporate and industry practices, processes, standards, etc. and their impact on project activities is vital; superior communication and interpersonal (tact, diplomacy, influence, etc.) skills essential. Must be a business oriented person.

COMMENTS:

Makes decisions and recommendations which can greatly impact corporate relationship with Client and project profitability. Management responsibility generally limited to one major project or more than one smaller less critical projects.   

SALARY:

$95k-$145k per year