Engineering Structures Jobs in Michigan Flexible
956 positions found — Page 4
You will collaborate with a dynamic team of physicists and engineers to design and build photonic devices, including narrow-linewidth lasers and integrated photonic systems, with applications in quantum sensing, communications, and measurement systems.
Key Responsibilities:
• Prototype Development
Lead the end-to-end design, simulation, and development of integrated photonic systems and laser subsystems, including waveguides, microrings, couplers, Sagnac mirrors, Bragg structures, and tapers.
• Simulation & Modeling
Perform device-level and system-level simulations using Lumerical MODE, FDTD, INTERCONNECT, HEAT/DEVICE, and GDSFactory. Conduct thermo-optic and electro-optic analysis and verification.
• Tapeout & Fabrication
Drive tapeout processes with commercial silicon photonics foundries. Manage GDSII layout preparation and validation using PDKs and oversee fabrication runs.
• System Integration
Collaborate with electrical, mechanical, and thermal engineers to integrate photonic systems into complete atomic and quantum platforms. Ensure stable packaging, alignment, and optical performance.
• Characterization & Testing
Design and execute optical test procedures. Use MATLAB, Python, LabVIEW, and other tools for real-time data acquisition, analysis, and iterative design refinement.
• Research & Innovation
Monitor advances in PIC technologies, frequency stabilization, and heterogeneously integrated lasers. Drive internal innovation and contribute to strategic R&D planning.
• Documentation & Reporting
Produce clear and thorough documentation including design specs, simulation reports, testing results, and fabrication protocols.
• Mentorship & Leadership
Mentor junior engineers and support technicians. Contribute to team skill development and project execution best practices.
Required Qualifications:
• Master's or Ph.D. in Photonics, Optics, Electrical Engineering, or a related field.
• Extensive hands-on experience with narrow-linewidth laser development and photonic system integration.
• Proficient in Ansys Lumerical, GDSFactory, MATLAB, Python, and SolidWorks.
• Demonstrated experience with PIC design, layout, and foundry tapeouts (SiN, SOI, etc.).
• Expertise in laser stabilization, diode/fiber coupling, bonding/alignment, and integrated thermal-mechanical design.
• Familiarity with PDK-based workflows and semiconductor fabrication.
• Excellent communication, collaboration, and problem-solving skills.
• U.S. Citizenship or Permanent Residency may be required.
Preferred Skills
• Experience with ultra-stable optical cavities, frequency combs, THz systems, or opto-electronic packaging.
• Background in microfabrication, cleanroom processes, or MEMS.
• Experience with RF and electronic integration.
• Track record of publications, patents, or conference presentations in photonics or quantum engineering.
• Project management and leadership experience.
About Rydberg Technologies
Embedded Software Engineer – Engine Controls GTM/AUTOSAR CDD development
Auburn Hills, MI
Full time Role
Customer wants Engineer having experience on Engine CDD Development using GTM timer module such as knock detection windows, spark control, fuel injector control, misfire detection, and manifold air pressure sensing.
Must to Have
• Experience with Infineon Generic Timer Module (GTM) for engine timing control.
• Understanding of digital signal processing concepts used in knock detection algorithms.
• Experience with AUTOSAR MCAL configuration using EB Tresos.
Key Responsibilities
• Develop Complex Device Drivers (CDD) for gasoline Engine Control Module (ECM/PCM) functions on ECU platform.
• Implement software for engine sensing and actuation including crank/cam position, engine speed, and direction detection.
• Support development of engine control features such as knock detection windows, spark control, fuel injector control, misfire detection, and manifold air pressure sensing.
• Implement above timing features using GTM-based timing and signal processing logic using modules such as TIM, TOM, ATOM.
• Integrate CDD logic with AUTOSAR BSW modules including NvM, RTE, OS, Digital IO, and Diagnostics.
• Support AUTOSAR BSW integration and ECU software architecture implementation.
• Work with MCAL drivers and support integration activities using EB Tresos Studio (modules such as ADC, DSADC, MCU, FEE, DMA, IRQ).
• Develop and debug software on Infineon AURIX TC38x microcontrollers.
• Support ECU software integration, testing, and debugging using Lauterbach Trace32 and ETAS INCA tools.
• Work closely with calibration, system, and hardware teams to support engine control feature development.
• Support issue analysis and root cause debugging during integration and validation phases.
Required Skills
• Strong Embedded C programming experience.
• Experience with ECM/PCM gasoline engine control software development.
• Hands-on experience in AUTOSAR BSW integration and CDD development.
• Experience with Infineon AURIX TC3xx (TC38x) microcontroller platform.
• Knowledge of engine sensing interfaces such as cam/crank sensors and injector/spark control mechanisms.
Job Title– Electrical Engineer (DRE)
Location: Novi, Michigan, USA
Job-Type: Full-Time
Job Summary
The Electrical Distribution System (EDS) Components Design Responsible Engineer (DRE) is responsible for the design, development, validation, and release of electrical distribution system components for Scout Motors' all-electric pickup trucks and SUVs. The role involves managing component design from concept through production launch, collaborating with internal teams and suppliers, and ensuring compliance with safety regulations and engineering standards.
Key Responsibilities
1. Component Design and Development
- Design and develop all EDS components including:
- Shields
- Troughs
- Grommets
- Connectors and terminals
- Power distribution components
- Manage the full product lifecycle from concept design (clean-sheet development) through virtual development, testing, validation, and manufacturing launch.
2. Technical Specification & Sourcing Support
- Collaborate with Purchasing and Finance teams to develop detailed technical specifications.
- Support the quotation and sourcing process for EDS components.
- Work closely with suppliers to ensure components meet cost, timing, and quality targets.
3. Standards and Component Library Development
- Develop and maintain a standardized library of core EDS components aligned with global Volkswagen Group standards.
- Ensure components can be effectively integrated into vehicle wiring harness and power distribution systems.
4. Cross-Functional Collaboration
- Partner with VW Group module owners, internal engineering teams, and external suppliers to define and release EDS components.
- Foster a collaborative, high-performance engineering culture within the team.
5. Verification and Validation
- Conduct virtual simulations and physical testing for component verification.
- Participate in field testing and product validation activities to confirm performance and reliability.
6. Compliance and Safety
- Ensure all designs meet automotive safety standards and U.S. government regulatory requirements.
- Apply Six Sigma methodologies to improve product quality and solve engineering problems.
7. Manufacturing and Production Support
- Contribute to the design and development of production facilities for Scout electric vehicles.
- Support the transition of components from development to mass production launch.
8. Continuous Improvement
- Monitor consumer experience and feedback to identify potential system improvements.
- Proactively recommend enhancements to EDS systems and components.
Required Qualifications
Education
- Bachelor's or Master's degree in:
- Electrical Engineering
- Mechanical Engineering
- Systems Engineering
- Or a related engineering field.
Experience
- Minimum 5+ years of experience in:
- Electrical wire harness design
- Power distribution components design and release
- Automotive product development processes including design, testing, and production launch.
Technical Skills
- Strong expertise in:
- Wire harness component design
- Power distribution systems
- Six Sigma problem-solving methodology
- Familiarity with Computer-Aided Engineering (CAE) tools or relevant simulation technologies.
Job Title– Electrical Engineer
Location: Novi, Michigan, USA
Job-Type: Full-Time
Job Summary
The Electrical Distribution System (EDS) Components Design Responsible Engineer (DRE) is responsible for the design, development, validation, and release of electrical distribution system components for Scout Motors' all-electric pickup trucks and SUVs. The role involves managing component design from concept through production launch, collaborating with internal teams and suppliers, and ensuring compliance with safety regulations and engineering standards.
Key Responsibilities
1. Component Design and Development
- Design and develop all EDS components including:
- Shields
- Troughs
- Grommets
- Connectors and terminals
- Power distribution components
- Manage the full product lifecycle from concept design (clean-sheet development) through virtual development, testing, validation, and manufacturing launch.
2. Technical Specification & Sourcing Support
- Collaborate with Purchasing and Finance teams to develop detailed technical specifications.
- Support the quotation and sourcing process for EDS components.
- Work closely with suppliers to ensure components meet cost, timing, and quality targets.
3. Standards and Component Library Development
- Develop and maintain a standardized library of core EDS components aligned with global Volkswagen Group standards.
- Ensure components can be effectively integrated into vehicle wiring harness and power distribution systems.
4. Cross-Functional Collaboration
- Partner with VW Group module owners, internal engineering teams, and external suppliers to define and release EDS components.
- Foster a collaborative, high-performance engineering culture within the team.
5. Verification and Validation
- Conduct virtual simulations and physical testing for component verification.
- Participate in field testing and product validation activities to confirm performance and reliability.
6. Compliance and Safety
- Ensure all designs meet automotive safety standards and U.S. government regulatory requirements.
- Apply Six Sigma methodologies to improve product quality and solve engineering problems.
7. Manufacturing and Production Support
- Contribute to the design and development of production facilities for Scout electric vehicles.
- Support the transition of components from development to mass production launch.
8. Continuous Improvement
- Monitor consumer experience and feedback to identify potential system improvements.
- Proactively recommend enhancements to EDS systems and components.
Required Qualifications
Education
- Bachelor's or Master's degree in:
- Electrical Engineering
- Mechanical Engineering
- Systems Engineering
- Or a related engineering field.
Experience
- Minimum 5+ years of experience in:
- Electrical wire harness design
- Power distribution components design and release
- Automotive product development processes including design, testing, and production launch.
Technical Skills
- Strong expertise in:
- Wire harness component design
- Power distribution systems
- Six Sigma problem-solving methodology
- Familiarity with Computer-Aided Engineering (CAE) tools or relevant simulation technologies.
Job Title: Controls Engineer
Location: Grand rapids, MI
Duration: Long Term
Job Description :
Design and build automation and robotic equipment.
Own and implement solutions from project concept to installation.
Conduct machine concepting, proof-of-principle, electrical design/layout, software design/programming, and debug hardware/software.
Perform acceptance testing and installation/integration at the factory.
Stay updated with rapidly changing technology to deliver optimal solutions.
Essential Skills
Proficiency in Siemens TIA Portal.
6 + years of experience with TIA Portal.
PLC programming, HMI/SCADA design, and drive configuration.
Knowledge of controls hardware including sensors, remote IO, servos, VFDs, machine vision, and barcode readers.
Familiarity with industrial networking protocols such as Profinet, Ethernet I/P, and EtherCAT.
Experience with 6-axis robots, primarily FANUC.
Additional Skills & Qualifications
Bachelor’s Degree in Electrical Engineering, Controls and Computer Control Systems, Mechatronic Engineering, Automation Engineering, Mechanical Engineering, or equivalent experience.
Work Environment
NOVA Engineering and Environmental is seeking a Marketing Coordinator with a focus on graphic design and social media to support our offices across the Southeast. This is an excellent opportunity for a candidate with a few years of experience or a recent graduate looking to grow within A/E/C marketing. The role blends traditional proposal and marketing support with hands-on graphic design, brand support, and social media execution. The position reports to the Marketing Supervisor and works closely with marketing, business development, and technical teams.
Essential Functions:
The successful candidate will work closely with the various Business Development Associates, Operational Managers and senior staff throughout the company. Primary job responsibilities will include the following:
Marketing & Proposal Support:
- Coordinate and manage the end to end proposal development process, from go/no go through final submission
- Assist with the coordination, development, editing, and production of SOQs, presentations, SF330’s and more using Adobe InDesign and Microsoft Office365
- Support proposal strategy sessions and assist with presentation development and production
- Write, edit, and format proposal content, resumes, project descriptions, and boilerplate content using Deltek CRM, Microsoft Office, and Adobe tools
- Maintain proposal content libraries, resumes, project sheets, and boilerplate materials
- Support proposal close out activities, debriefs, and process improvements
- Assist with market research to help offices identify trends, clients, and competitors
- Support regional marketing and business development meetings as needed
Graphic Design & Brand Support:
- Produce and update marketing graphics for proposals, presentations, and collateral in accordance with NOVA brand standards
- Assist with maintaining and growing NOVA’s internal graphics and template library
- Support the development of regional marketing collateral including brochures, flyers, conference displays, and digital assets
- Ensure consistency with corporate branding across all marketing materials
Social Media & Digital Marketing:
- Assist with NOVA’s social media program to support brand awareness, recruiting, and community engagement
- Create and schedule social media content, including graphics and short-form copy, in coordination with the marketing team
- Help track engagement metrics and support reporting on social media performance
Systems & Administration:
- Support the Client, Project, and Employee Database (Deltek Vision/Vantagepoint)
- Assist with tracking business opportunities and leads in the CRM
- Help coordinate the renewal of annual contracts and pre-qualification certifications
Minimum Qualifications, Experience and Education:
- Minimum 2 years of marketing experience or equivalent (A/E/C industry preferred)
- Proficient in Microsoft (Word, Excel, PowerPoint and Power BI) and Adobe (InDesign, Photoshop and Acrobat), as well as experience in database management
- Excellent oral and written communication skills
- High attention to detail and strong quality control skills
- Ability to manage multiple deadlines in a fast paced, deadline driven environment
- Familiarity with Deltek Vantagepoint Applications, including Deltek Vantagepoint’s CRM Software a plus
- Motivated self-starter with ability to problem solve
- Ability to work under pressure with multiple tasks and deadlines
- Ability to travel between offices on occasion
NOVA is an Equal Opportunity Employer. All qualified candidates are encouraged to apply. NOVA does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, disability, national origin, ancestry, marital status, veteran status or any other characteristic protected by law.
About Nova:
Established in 1996, NOVA was originally founded to provide Environmental Consulting, Geotechnical Engineering, and Construction Materials Testing and Inspection services to the design and construction community, largely in the southeastern United States. Since our founding, NOVA has added additional service lines such as Facilities and Building Envelope, Forensics, Municipal and more. We are dedicated to providing a wide variety of projects and services with an emphasis on collaboration and safety. We offer a stimulating and inspiring work environment where our employees are recognized for their efforts and achievements and are mentored for professional growth.
Currently, NOVA employs 650+ personnel in 18 offices serving clients throughout the southeastern United States and beyond. Our firm has professional and administrative support staff that includes registered professional engineers, registered professional geologists, environmental scientists, registered roof observers, LEED accredited professionals, soil/foundation engineers, laboratory specialists, materials technicians, ICC-certified inspectors, NICET-certified technicians, and AWS-certified welding inspectors. NOVA’s facilities include AASHTO-accredited laboratories in soils, concrete, aggregate and hot-mix asphalt testing/inspection. We also have CCRL-inspected laboratories for concrete sampling, curing, and testing. NOVA will continue to expand its reach and reputation as a leader in the testing, inspection, and consulting fields with a strong legacy of quality and integrity by promoting our best internal resources and recruiting a diverse culture of valued and exceptional talent.
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
