Engineering Structures Jobs in Maryland

We're seeking a knowledgeable and detail-oriented Heat Treat Process Engineering Supervisor to lead and support all aspects of the heat treatment operations with a focus on quality, compliance, and continuous improvement.

POSITION SUMMARY:

The Heat Treat Process Engineering Supervisor serves as a technical expert responsible for ensuring the proper thermal processing of materials to meet metallurgical and production requirements meeting all CQI-9 requirements. This role includes overseeing furnace operations, audits, documentation, process control, equipment maintenance, and continuous improvement initiatives.

The ideal candidate will have strong metallurgical knowledge, heat treat process experience, the ability to troubleshoot equipment and process issues, and the ability to manage compliance in a dynamic manufacturing environment. This role has direct supervisory responsibility for Lab Technicians, including scheduling, performance management, training, and ensuring compliance with laboratory testing standards and metallurgical validation requirements.

ESSENTIAL DUTIES (Complete):

• Oversee and manage daily heat treat operations including carburizing, hardening, tempering, and stress relieving
• Ensure compliance with AIAG CQI-9: Heat Treat System Assessment (HTSA) and other applicable standards
• Implement and maintain heat treat process control plans per AIAG guidelines
• Conduct and lead CQI-9 self-assessments, audits, and ensure closure of gaps and non-conformances
• Ensure proper setup, calibration, and operation of furnaces and quench systems
• Monitor thermal cycles and maintain control charts, pyrometry data, and process records per CQI-9
• Support system accuracy tests (SAT), temperature uniformity surveys (TUS), and instrumentation calibration activities
• Ensure all documentation meets internal and customer-specific AIAG compliance requirements
• Collaborate with Engineering, Maintenance, and Quality to address process improvements and problem-solving
• Perform metallurgical inspections including hardness testing and microstructure verification
• Provide technical guidance to operators and maintenance personnel on best practices
• Develop and optimize heat treat process parameters including atmosphere control, quench severity, and thermal cycle design to meet metallurgical and dimensional requirements
• Atmosphere verification (Carbon Potential, Dew Point, etc.)
• Distortion Mitigation Strategy
• Develop, implement, and maintain training programs to ensure team competency on heat treat systems and compliance
• Lead root cause analysis and corrective action efforts for heat treat-related non-conformities
• Utilize Lean Six Sigma principles to drive cost reduction, efficiency, and quality improvements
• Maintain proper traceability and process documentation for internal and external audits
• Provide technical direction for furnace troubleshooting, repair validation, and upgrade initiatives in coordination with Maintenance
• Perform other duties as assigned or required in support of production and quality goals
• Directly supervise Lab Technicians, including daily work assignments and workload balancing
• Approve timecards, PTO, and manage attendance
• Perform other duties as assigned or required in support of production and quality goals

CORE COMPETENCIES:

• Action oriented: Demonstrates ownership in solving process and compliance issues
• Self-Motivated: Demonstrates ability to take initiative and drive to achieve results. Proactively drives conformance with CQI-9 requirements and continuous improvement
• Accountability: Demonstrates ability to take responsibility and maintains sense of ownership and follow through on commitments. Sets high standards of performance.
• Communication: Demonstrates ability to convey and distribute information effectively and encompass strong speaking, presentation, written and listening skills. Ability to create an environment for open communication, and communicates clearly across departments regarding heat treat and compliance status
• Teamwork: Demonstrates ability to work well with others to accomplish common goals and build a positive climate and trusting relationships within teams.
• Leadership: Demonstrates ability to give direction, motivate, manage and reward performance, provide constructive feedback and foster individual professional development. Trains and guides operators to follow standard operating procedures and compliance guidelines
• Reliability: Demonstrates dependability, accountability and trust. Follows processes and meets commitments. Delivers consistent process performance and regulatory documentation
• Decision-making: Demonstrates ability to discover opportunities in challenges, seek profit and sustainable growth, make courageous while sound decisions and demonstrate a good business understanding. Applies analytical skills and CQI-9 knowledge to make data-driven decisions

KNOWLEDGE, SKILLS & ABILITIES:

• Thorough understanding of heat treatment principles, metallurgy, and thermal processing equipment
• Working knowledge of CQI-9 audits, checklists, gap closures, and AIAG documentation practices
• Familiarity with control system troubleshooting, PLCs, HMIs, and data logging
• Ability to supervise, mentor, and train heat treat personnel on compliance, safety, and process controls
• Skilled in conducting microstructure analysis and hardness testing to validate process results
• Strong organizational and record-keeping skills for always maintaining audit-readiness
• Proficiency in Lean Manufacturing, 5S, and Continuous Improvement
• Physically capable of working in a high-temperature, industrial environment
• Commitment to upholding process integrity and product conformance to specification

WORKING ENVIRONMENTAL CONDITIONS:

• Work involves exposure to high-temperature equipment, hot surfaces, and industrial environments. May encounter fumes, noise, and moving machinery. Personal protective equipment (PPE), including heat-resistant gloves, face protection, and hearing protection, is required. Occasional exposure to quenchants, chemicals, and elevated platforms is expected. Safety training and environmental awareness are critical components of the role.

SUPERVISORY RESPONSIBILITY:

• This role has direct supervisory responsibilities.

The demands described here represent those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions.

QUALIFICATIONS:

• Bachelors degree in Mechanical, Materials, Metallurgical, or Manufacturing Engineering required.
• Materials Science or Metallurgical Engineering preferred
• 7+ years of hands-on heat treat or metallurgical experience, preferably in automotive or aerospace manufacturing
• Demonstrated knowledge and application of CQI-9 Heat Treat System Assessment requirements
• Familiarity with AIAG standards and automotive core tools (APQP, PPAP, FMEA, SPC, MSA)
• Experience conducting and documenting SAT, TUS, and other pyrometry-related activities
• Experience operating batch and continuous furnaces, quench systems, and thermal processing equipment
• Demonstrates ability to directly supervise lab personnel including assigning work, evaluating performance, managing corrective actions, and developing team capabilities.
• Creates accountability, enforces standards, and drives measurable performance improvements.
• Proficient in hardness testing, blueprint reading, GD&T, and metallurgical inspection techniques
• Strong computer skills including Microsoft Office and plant data collection systems
• Excellent troubleshooting, documentation, and analytical skills
• Commitment to safety, quality, and environmental standards
• Ability to lead and train team members on technical and compliance-related topics
• Ability to work independently, manage multiple tasks, and prioritize effectively

Compensation details: 96 Yearly Salary

PI34bc9acf25ca-26289-39818891

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Tapestry Solutions, A Boeing Company, brings over 30 years of industry experience designing, implementing, training, and supporting high-quality, cost-effective information technology and business intelligence solutions. With a dedicated team of approximately 500 professionals, we proudly serve 75 defense, commercial, and government clients across more than 50 U.S. locations and 9 countries worldwide.

As a trusted partner, our employees embody our core values by consistently delivering excellence, taking full ownership, and developing innovative solutions that enable critical missions and ensure the safety of our global customers and team members. Joining Tapestry Solutions means enjoying the best of both worlds: access to the vast resources of Boeing combined with the agility and people-focused, family-oriented culture of a small business where your contributions truly matter.

We are seeking a dynamic and visionary Chief Software Engineering Manager in Swansea, IL or Maryland Heights, MO to lead our technology strategy and oversee both software development and information technology (IT) services to serve our team and meet the demands of our government and commercial clients. This leader will play a critical role in shaping the technological direction of the company, ensuring that our offerings are aligned with industry standards, government regulations, and best practices in IT management. This is an exciting opportunity to help lead our business into the future, focused on serving as a trusted partner to our customers, providing exceptional software products and services in support of U.S. and foreign military defense operations. We developed the market-leading maintenance, repair and overhaul software solution and we have a long legacy advancing the DoD's cornerstone logistics command and control applications. We also support next-generation mission planning software across multiple platforms including the F-22, F-15, F-18, MQ-25, and Tomahawk Cruise Missile.

Our people are located primarily in St. Louis, MO, San Diego, CA and San Luis Obispo, CA.

Position Responsibilities:

• Develop and execute the technology vision and strategy for Tapestry, ensuring alignment with overall business objectives and government requirements
• Drive innovation in software development practices, methodologies, and technologies to enhance product offerings and improve service delivery
• Lead the technical requirements and resource allocation in support of capture activities, including proposal development and solution design
• Oversee the design, implementation, and maintenance of our IT infrastructure, ensuring it supports the software development lifecycle and meets the operational needs of the organization
• Establish and enforce cybersecurity policies and practices to protect sensitive government data and ensure compliance with federal regulations
• Lead and mentor a team of software engineers, IT professionals, and technical staff, fostering a culture of collaboration, continuous learning, and high performance
• Collaborate with government and commercial clients, partners, and internal stakeholders to understand their needs and translate them into technical solutions
• Oversee the technology budget, ensuring efficient allocation of resources including vendor relationships to support development initiatives, IT operations, and infrastructure needs
• Stay abreast of industry trends, emerging technologies, and competitive landscape to identify opportunities for growth and innovation in both software and IT services
• Identify potential risks associated with technology initiatives and develop mitigation strategies to address them
• Manage and provide developmental opportunities for employees and mid-level managers

Basic Qualifications (Required Skills/Experience):

• 10+ years of leadership experience in software development, with a focus on government contracting and services
• A demonstrated track record of managing technical teams and driving successful projects
• 5+ years of budget responsibility
• 3+ years of experience providing technical software development direction in support of capture and business development activities
• In-depth knowledge of the entire SDLC process including software development methodologies (Agile, DevOps, etc.)
• Familiarity with government regulations and compliance standards related to software development and cybersecurity
• Excellent communication and interpersonal skills, with the ability to engage effectively with diverse stakeholders at all levels internally and externally
• Strong analytical and problem-solving abilities, with a strategic mindset
• Experience with budget management and resource allocation

Preferred Qualifications (Desired Skills/Experience):

• Prior experience as a Chief Technology Officer
• 5+ years of experience in IT operations management, with a focus on government contracting and services including government regulations and compliance standards related to IT operations
• Knowledge of best practices in IT infrastructure management
• Experience working within a subsidiary of a large company

Drug Free Workplace:

We are a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Pay & Benefits:

We strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

We also provide eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualification, as well as market and business considerations.

Summary base pay range $195,000 - $215,000

Applications for this position will be accepted until Mar. 21, 2026

Export Control Requirements:

This is not an Export Control position.

Relocation

Relocation assistance is not a negotiable benefit for this position.

Security Clearance

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

About the Company

Dhillon Engineering, Inc. (DEI) is a design firm in Owings Mills, Maryland specializing in multi-discipline architectural and engineering design services. Our areas of expertise include architecture, civil, structural, electrical, mechanical, and plumbing systems. In addition, we provide construction management, inspection, and a full range of construction support services.

About the Role

The Project Manager is responsible for leading project teams, managing client relationships, and ensuring that projects are delivered on schedule, within budget, and in accordance with design and regulatory requirements. This role serves as the primary liaison between clients, consultants, and internal technical teams while maintaining oversight of project scope, contracts, schedules, and deliverables.

The ideal candidate is highly organized, technically knowledgeable in the design process, and experienced in coordinating multidisciplinary teams in a collaborative environment.

Responsibilities

Project Planning & Execution

• Manage architecture and engineering design projects from proposal through project closeout.
• Develop and maintain project schedules, work plans, and budgets.
• Coordinate internal design teams including architects, engineers, and technical staff.
• Ensure projects meet technical, regulatory, and quality standards.
• Monitor project progress and adjust resources as necessary to maintain schedule and budget.

Client Relationship Management

• Serve as the primary point of contact for clients throughout the project lifecycle.
• Lead project meetings, design reviews, and client presentations.
• Manage client expectations and maintain strong long-term relationships.
• Communicate project status, risks, and progress updates.

Design Coordination

• Coordinate multidisciplinary design efforts across architecture, structural, mechanical, electrical, and civil engineering disciplines.
• Ensure integration of design components across all project phases (concept, schematic design, design development, construction documents).
• Review drawings, specifications, and technical deliverables for completeness and quality.
• Ensure designs comply with codes, standards, and client requirements.

Budget & Contract Management

• Prepare and manage project budgets and staffing plans.
• Track project costs, labor utilization, and profitability.
• Manage project contracts, scope changes, and amendments.
• Review and approve invoices, consultant payments, and change orders.

Team Leadership

• Lead and mentor project teams, including junior engineers and designers.
• Facilitate effective communication between internal teams and external consultants.
• Delegate responsibilities while maintaining accountability for project outcomes.
• Foster collaboration and a high-performance project culture.

Construction Phase Support

• Support construction administration activities including responding to RFIs, reviewing submittals, and participating in site visits.
• Coordinate with contractors and stakeholders during construction.
• Assist in resolving design or construction issues that arise in the field.

Qualifications

• Bachelor’s degree in architecture or engineering.
• 5–10+ years of experience in architecture, engineering, or multidisciplinary design environments.
• Professional Engineer (PE) license
• Experience managing design projects from concept through construction.
• Strong understanding of design processes, project delivery methods, and permitting requirements.
• Proficiency in project management tools and design software (AutoCAD, Revit, or similar).
• Strong leadership, communication, and organizational skills.

Preferred Qualifications

• Familiarity with construction administration and contract management.
• Experience with multidisciplinary A/E teams and consultant coordination.

Why Join Us

• Opportunity to lead impactful design projects
• Collaborative and technically driven work environment
• Career growth and leadership development
• Competitive compensation and benefits

Equal Opportunity Statement

• We are committed to diversity and inclusivity in our hiring practices and encourage applicants from all backgrounds to apply.

Note:

• Dhillon Engineering, Inc. will not accept unsolicited CVs through recruitment agencies or any other external means. This post is currently the only acceptable method of applying.

• 
  
• Design / Engineering
  
  • 
    
  • Generate design documents for SCADA/Automation projects
    
    • 
      
    • Develop design document narratives
      
    • Perform requirements analysis
      
    • Generate Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field Testing
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor's degree in electrical engineering and 5-7 years field experience
  
• Associate degree in the electrical field and 10 years field experience
  
• High school diploma and 15 years field experience
  
• 5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
  
• Experience in reading electrical and control schematics
  
• Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control and protection systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
  
• Must be a US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

ARM Group LLC is seeking a Civil or Environmental Project Manager with land development experience to join our fast-growing Energy and Power practice. In this role, you will manage development projects for renewable energy installations, working at the intersection of sustainable energy and environmental compliance. The successful candidate will collaborate with our multidisciplinary team of engineers, scientists, geologists, CAD designers, and administrative staff to deliver comprehensive solutions that meet our clients’ energy goals.

As a Project Manager, you will oversee stormwater management design, erosion and sediment control planning, and related land development engineering for solar, wind, and other energy & power projects. You will apply your technical expertise to complete engineering calculations, prepare detailed reports, and develop design drawings using CAD Software. This role requires strong communication skills, as you will regularly interface with regulatory agencies, clients, and internal project teams to ensure project success.

Location: This position can be filled in our Columbia, MD office.

Primary Responsibilities:

· Manage and coordinate the development, design and permitting of multiple projects simultaneously for various projects throughout the Mid-Atlantic region (ARM territory) with a primary focus in Maryland.

· Prepare and review engineering designs and permit applications in order to acquire approvals.

· Maintain complex schedules, develop project timelines, coordinate with subcontractors, and manage people and materials, acting as the direct point of contact for all stakeholders, in order to complete jobs on schedule and within budget guidelines.

· Monitor project work progress, adhering to the scope of work, and communicating with key stakeholders.

· Assess and mitigate project risks; Pro-actively recognize problems and develop effective solutions.

· Perform quality assurance and quality control evaluations and/or check technical calculations and prepare project specifications.

· Prepare detailed models and technical documents to present project design/feasibility findings to stakeholders.

· Evaluate the economic, engineering, or pragmatic feasibility of projects based on site and/or building constraints (i.e., constructability assessment).

Requirements

· Professional Engineer (P.E.) License in Pennsylvania, Maryland, Virginia, or other mid-Atlantic state(s).

· Bachelor's degree or equivalent in engineering (Civil or Environmental) from an accredited four-year college or university.

· 5+ years of experience designing and permitting projects involving land development or land use permitting.

· Experience with stormwater management plans, erosion & sediment control planning and permitting (NPDES).

· Knowledge of State environmental regulations and experience navigating local permitting authorities for zoning, subdivision, and stormwater ordinances.

· Strong organizational and time management skills with proven ability to manage multiple, complex projects.

· Creative and detail-oriented team player with a strong work ethic, self-motivated mindset, and eagerness to grow.

· Ability to communicate effectively verbally and in writing with key stakeholders, including officials and environmental regulators, to exchange information, clearly explain the project goals, obtain permit approvals, coordinate compliance efforts.

· Articulate, confident and able to effectively present information and respond to questions from managers, clients, and the general public.

· Experience managing vendor and client payment terms to achieve positive cash flow by reviewing project billings, accounts receivable, monitoring work in progress preparing client invoices and assisting with payment collection.

· Reasonably proficient in AutoCAD, Hydrocad (or alternate stormwater modeling software), MS Office Suite, and MS Project or equivalent project scheduling software.

Your Wellness, Our Priority: A Look at Our Benefits

We invest in our team's well-being and future through a comprehensive benefits package with a range of offerings designed to support you holistically. Our health and wellness offerings include two Health Insurance options (Traditional PPO and QHDHP with an HSA), vision and dental coverage, life insurance, disability protection, accident and critical illness coverage. To enhance your future financial security, we provide a 401(k) with company match, HSA/FSA accounts, and 529 college savings plans. Work-life balance is prioritized through our generous PTO starting at 15 days per year and 10 paid holidays per year, giving you ample time to rest, recharge, and attend to life outside the office. An Employee Assistance Program is provided to you and your household with resources to assist you in managing a variety of situations. We invest in your professional growth through our Tuition Reimbursement program and continuing education opportunities. After 6 months of employment, all team members become eligible for quarterly bonuses, providing additional avenues for financial growth. This robust package is designed to foster a workplace where you can thrive both personally and professionally, underscoring our dedication to your overall well-being and future success.

Compensation Description:

Project Manager: $92,200-123,000/year, based on experience

• 
  
• Initiates design documents for small projects and in support of large programs
  
• Develops design documents narratives
  
• Performs requirements analysis
  
• Develops Sequence of Operations / System Functional Documentation
  
• Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
  
• Develops Specifications
  
• Performs QA/QC and technical reviews of designs
  
• Plans and Design Procedures and Equipment for Integrated Systems Factory Testing
  
• Comment Resolution
  

Mechanical-focused controls engineer (BAS/BMS)

• 
  
• Experience on EPMS monitoring
  
• Certifications in Platforms (at least one), familiarity with any others preferred: Ignition, Aveva, Automated Logic, Siemens, Schneider EBO, Niagara N4, Iconics Gen64
  
• Experience with Federal Government controls projects (ICS/EMCS/UMCS) preferred
  
• Familiarity with Cisco network switch programming and design preferred
  

• 
  
• Lead programming / configuration team efforts for complex automation and SCADA applications.
  
• Program / Configure / troubleshoot PLCs, RTUs, and/or HMI systems
  
• Testing / Troubleshooting / Deployment / Commissioning
  
• Author testing / commissioning procedures
  
• Preparation of test reports
  
• Originates test procedures
  
• Commissioning of deployed systems
  
• Development of test equipment and simulation devices
  
• Perform Factory and Field Testing
  

• 
  
• Perform troubleshooting on service calls to existing and legacy system operators
  
• Perform hardware / software upgrades and replacements on existing systems
  

• 
  
• Conducts any surveys, inspections, tours, etc. of client sites, as required
  
• Prepares cost estimates and supporting documents for small projects
  
• Perform hardware / software upgrades and replacements on existing systems
  
• Evaluation and pricing of change orders
  

• 
  
• Assigns technical tasks and coordinates with entry-level engineers
  
• Assigns tasks and coordinates with Technical Staff
  

• 
  
• Experience in reading electrical and control schematics and plans
  
• Experience in control system startup, configuration, and calibration
  
• Experience in testing and troubleshooting control systems
  
• Experience using basic electrical and machinist hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• 3-7 years' experience
  
• Bachelor's degree in engineering or higher
  
• Associate degree (add 3 years)
  
• High school diploma (add 5 years)
  
• Must be a US Citizen
  

• 
  
• Experience in computer networks
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software
  
• Standard Office Software (Microsoft Word, Excel, etc.)
  

• 
  
• Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
  
• Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
  

• 
  
• Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
  
• Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
  
• Design Build Institute of America (DBIA)
  
• Engineer in Training (EIT) in relevant in field
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

Kelly Government Solutions is a strategic supplier and business partner to the federal government and its key suppliers. Through our partnership with the National Institutes of Health, Kelly Government Solutions offers administrative, IT, engineering, scientific, and healthcare professionals the opportunity to work with the leading medical research center in the world. We are seeking an experienced individual to work as a Clinical Research Coordinator at the National Institutes of Health in Baltimore, MD.

The Clinical Research Coordinator provides comprehensive support services to fulfill the operational objectives of the National Institute on Aging. The primary responsibilities involve coordination and oversight of all activities related to medical records, support of clinical operations, participant scheduling, and research data management for the HANDLS study.

Schedule:

Full-Time, Monday-Sunday Variable Schedule- Includes possibility of holidays

Key Duties and Responsibilities:

• Monitor the electronic medical record system to ensure completeness of data collection forms, progress notes, participant information forms, and diagnostic test completion forms.
• Work closely with medical records staff to set priorities based on participant numbers and anticipated workflow.
• Query relational databases and generate individual participant report packages; address technical issues with the HANDLS programming team.
• Audit medical records for compliance, identify errors, ensure timely corrections, and participate in regular chart review meetings with research staff.
• Schedule and confirm appointments for HANDLS MRV visits and out-of-state participants using a custom-designed computerized system; prioritize contact based on appointment availability and likelihood of participant engagement.
• Identify and follow up on missed HANDLS appointments, including contacting participants’ families or emergency contacts, assisting with rescheduling, and managing bulk mailings for appointments.
• Conduct initial disability and special needs screening during scheduling calls, evaluating participant needs and notifying HANDLS staff for follow-up.
• Review clinical laboratory results daily via the database, prepare lab reports, ensure physician review within 5-7 days, communicate abnormal results, and prepare alert letters for immediate reporting to participants.
• Prepare charts, data collection forms, and participant materials for clinical staff; coordinate delivery and filing of records and supplies.
• Coordinate support from medical records staff on outreach events (e.g., open houses and community events).
• Attend study meetings, write and annually review operational manual sections, assist with new employee orientation, and participate in mandatory training.
• Enter research data, prepare participant result packets (lab results, health education materials), and coordinate all bulk mailings.

Qualifications:

• Bachelor’s degree from an accredited institution required.
• Minimum of 2 years' experience as a Clinical Research Coordinator
• Proficiency with MS Office Suite.
• Ability to work both independently and closely with others.
• Must be able to maintain confidentiality of sensitive data.

• This position requires an active DoD Clearance (Secret, Top Secret, Top Secret/SCI) or the ability to be obtain an (Interim Secret, Interim Top Secret)

• Because an active or interim DoD clearance is required, U.S. Citizenship is required 

Job Description

Responsibilities

• This technician will support a large federal agency's Network Infrastructure through survey, design, and deployment of structured networks and will be responsible for the upkeep of the security posture of the environment
• This is accomplished through projects such as new installations, life cycle replacement projects, Cable Plant and wireless installations that are compliant with commercial, TEMPEST, and NIST standards
• Lead network survey, design and installations under direction of the government
• analyze, test, troubleshoot, and evaluate existing network systems, such as local area networks (LAN), wide area networks (WAN), cloud networks, servers, and other data communications networks.
• Perform network maintenance to ensure networks operate correctly with minimal interruption.
• Knowledge of DISA network topologies and standards
• Topology and rack elevations using Visio
• Create detailed Site Survey reports detailing a site's current infrastructure, NIST and TEMPEST compliance, along with design recommendations
• Configure, install, test, certify, and troubleshoot network infrastructure cabling
• Ensure Network cabling infrastructure is compliant with current NIST and TEMPEST Standards
• Build and install equipment racks
• Install, dress, label, and terminate Cat6 and Fiber cable in telecommunications rooms
• Test and troubleshoot network infrastructure issues on SIPR and NIPR networks
• Create accurate reports and documentation to design/certify network infrastructure
• Track, manage, and ensure project tasks are completed in a timely manner
• Develop Bills of Material (BOM) for network plant design requirements
• Plan and perform preventive maintenance and scheduled upgrades (Life-cycle replacements)
• Investigate physical faults in the network
• Report network infrastructure deployment status to key stakeholders

Qualifications

• Must hold an active Secret security clearance
• (US Citizenship required)
• Security + Certification 

Additional Requirements:

• Organizes and directs network installations on site surveys.
• Assesses and documents current site network configuration and user requirements.
• Designs and optimizes network topologies.
• Directs and leads preparation of engineering plans and site installation Technical Design Packages.
• Develops installation schedules.
• Mobilizes network installation team.
• Directs and leads preparation of drawings documenting configuration changes at each site.
• Prepares site installation and test reports.
• Coordinates post installation operations and maintenance support.

Skills

Network engineering, Router, Firewall, Troubleshooting, Infrastructure, Ccna

Top Skills Details

Network engineering,Router,Firewall,Troubleshooting,Infrastructure,Ccna

Additional Skills & Qualifications

In addition to standard installer skillsets, candidates should possess the following:

• Cable installation and termination (fiber and copper)

• Rack and stack of network equipment

• Basic troubleshooting and testing of network connections

• Ability to read and follow network diagrams and installation plans

• Familiarity with structured cabling standards and labeling

Candidates with networking certifications (e.g., Network+, CCNA, Aruba, Versa) will be preferred.

Experience Level

Expert Level

This is a Contract position based out of Fort Meade, MD.

The pay range for this position is $39.00 - $40.00/hr.

Eligibility requirements apply to some benefits and may depend on your job
classification and length of employment. Benefits are subject to change and may be
subject to specific elections, plan, or program terms. If eligible, the benefits
available for this temporary role may include the following:

• Medical, dental & vision
• Critical Illness, Accident, and Hospital
• 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
• Life Insurance (Voluntary Life & AD&D for the employee and dependents)
• Short and long-term disability
• Health Spending Account (HSA)
• Transportation benefits
• Employee Assistance Program
• Time Off/Leave (PTO, Vacation or Sick Leave)

This is a fully onsite position in Fort Meade,MD.

This position is anticipated to close on Mar 24, 2026.

We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

We’re a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We’re a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We’re strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We’re building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at .

The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.