Engineering Structures Jobs in Lucas Texas
185 positions found — Page 2
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Provides input for colleague’s performance appraisals
· Assists Test Engineers when commissioning new test equipment.
· Provides technical assistance to other technicians on the same shift.
· Provides line support to manufacturing for all test processes.
· Ensures “machine down” calls are responded to in a timely manner.
· Liaises with manufacturing to determine repair priorities.
· Ensures adequate spares are available for all allocated equipment.
· Ensures Preventative Maintenance is carried out at specified intervals on all allocated equipment.
· Liaises with manufacturing to ensure Preventative Maintenance does not impact production schedule.
· Escalates to Test Engineers any unresolved/ongoing issues.
· Instructs operators on safe/effective use of test equipment.
· Provides daily report of all line issues.
· Provides weekly/quarterly downtime reports for allocated equipment.
· Sources spares from the most cost effective supplier.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Second Shift: Monday - Friday 3:00 p.m. - 11:30 p.m.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Provides input for colleague’s performance appraisals
· Assists Test Engineers when commissioning new test equipment.
· Provides technical assistance to other technicians on the same shift.
· Provides line support to manufacturing for all test processes.
· Ensures “machine down” calls are responded to in a timely manner.
· Liaises with manufacturing to determine repair priorities.
· Ensures adequate spares are available for all allocated equipment.
· Ensures Preventative Maintenance is carried out at specified intervals on all allocated equipment.
· Liaises with manufacturing to ensure Preventative Maintenance does not impact production schedule.
· Escalates to Test Engineers any unresolved/ongoing issues.
· Instructs operators on safe/effective use of test equipment.
· Provides daily report of all line issues.
· Provides weekly/quarterly downtime reports for allocated equipment.
· Sources spares from the most cost effective supplier.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Second Shift: Monday - Friday 3:00 p.m. - 11:30 p.m.
Date Posted:
2026-02-23Country:
United States of AmericaLocation:
US-TX-MCKINNEY-513WM ~ 2501 W University Dr ~ WING M BLDGPosition Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required after day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
Raytheon Engineering designs, produces, and builds new technologies and enhances existing capabilities to solve our customers’ most complex challenges. The Airborne Antenna Design Department is a team of engineers responsible for electrical design and development of RF products within Raytheon. Our charter is to provide expertise in sub-systems engineering, RF and radome design, digital apertures, antenna ranges and module test.
We are looking to add to our team and desire a Senior Technical Support Engineer to be part of a team that provides the most advanced end-to-end solutions that detect, track, engage and neutralize a broad range of threats. The role includes knowledge of RF product testing and associated RF test equipment, typically obtained through a University Degree program, or through work experience. May have practical knowledge of projects, programs and systems with the ability to make enhancements in daily work.
What You Will Do
Work with various teams of engineers, assemblers, and technicians.
Perform electrical engineering functions involving the layout, building, testing, troubleshooting, repairing and modification of electronic or electro-mechanical devices, assemblies, subsystems, and systems.
Perform analysis on production data, to determine root cause analysis of failures.
Be involved in planning and executing rework of production assemblies.
Coordinate and execute tasks in Raytheon antenna ranges, maintain and standardize range infrastructure to meet program requirements.
This 1st shift role will be 100% on-site and based in McKinney, TX.
Qualifications You Must Have
Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior work experience to include any combination of the following:
Experience with RF fundamentals, such as RF electro-magnetic spectrum, propagation delay, and RF components.
Experience with antenna measurement patterns and how antennas work.
Experience with decibels (dB’s) and/or dBm values within respect to equivalent power levels in Watts.
The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.
Qualifications We Prefer
RF experience and knowledge of microwave theory.
Ability to build positive relationships and craft clear communication in and out of direct team members.
Focus on results with ability to drive tasks to closure.
Active DoD Secret clearance with investigation within last five years.
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
This position offers relocation based on candidate eligibility.
Learn More & Apply Now!
Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Date Posted:
2026-02-25Country:
United States of AmericaLocation:
US-TX-RICHARDSON-C17 ~ 1717 Cityline Dr ~ CITYLINE C17Position Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
TS/SCI without PolygraphSecurity Clearance Status:
Active and existing security clearance required on day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
Raytheon is hiring a Senior Database Engineer to support our teams in Richardson TX . You will have the opportunity to directly impact the world around you and contribute to classified programs and technologies you are passionate about. In this position you would be familiar with creating, updating, and managing databases and the code that interacts with them.
What You Will Do
- Identify and understand customer needs and apply sound, demonstrable understanding of database principles, theories, and concepts related to software engineering to translate those needs to viable design solutions.
- Demonstrate critical thinking skills with the ability to communicate concepts and ideas well.
- Successfully integrate Commercial Off-the-Shelf (COTS) products as part of customer-driven solutions.
- Use proven problem solving and analytical skills.
- Obtain and maintain SCI program access and complete polygraphs.
- Obtain Security+ certification within 60 days of start.
Qualifications You Must Have
- Typically requires a degree in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 5 years of Database Engineering experience.
- Experience as a Database Administrator (DBA) and Database Engineer (DBE).
- Experience with Relational Database Management Systems (RDBMS) solutions, such as Oracle, Postgres, or related systems.
- Experience working with Systems and Software Engineers to implement, and modify backend databases to interact with applications within a development environment.
- Experience virtualizing or containerizing databases.
- Experience using Linux command line to perform database administration activities.
- Active and transferable Top Secret U.S. government issued security clearance is required prior to start date with the ability to obtain a TS/SCI prior to start date. U.S. Citizenship is required as only U.S. Citizens are eligible for a clearance.
Qualifications We Prefer
- Existing Security+ Certification
- Experience with AWS.
- Experience with NoSQL database products such as MongoDB and DynamoDB.
- Experience troubleshooting database issues such as DR, replication & backups and other related issues.
- Experience troubleshooting performance issues
- Experience with database security controls and audit & compliance requirements.
- Experience with automating routine tasks.
- Experience with Spatial databases
- Coding experience (SQL, Python, Java) is helpful!
What We Offer
- Whether you’re just starting out on your career journey or are an experienced professional, we offer a total rewards package that goes above and beyond with compensation; healthcare, wellness, retirement, and work/life benefits; career development and recognition programs. Some of the benefits we offer include parental (including paternal) leave, flexible work schedules, achievement awards, educational assistance, and child/adult backup care.
- Relocation Eligibility - Relocation assistance is available.
Learn More & Apply Now!
- Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
- This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Texas: Are RTX
#LI-Onsite
#LI-HS30
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Date Posted:
2026-02-06Country:
United States of AmericaLocation:
US-TX-MCKINNEY-513WC ~ 2501 W University Dr ~ WING C BLDGPosition Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required on day 1RTX Corporation is an Aerospace and Defense company that provides advanced systems and services for commercial, military and government customers worldwide. It comprises three industry-leading businesses – Collins Aerospace Systems, Pratt & Whitney, and Raytheon. Its 185,000 employees enable the company to operate at the edge of known science as they imagine and deliver solutions that push the boundaries in quantum physics, electric propulsion, directed energy, hypersonics, avionics and cybersecurity. The company, formed in 2020 through the combination of Raytheon Company and the United Technologies Corporation aerospace businesses, is headquartered in Arlington, VA.
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
We have an exciting opportunity for a Senior Software Engineer – Embedded to join our Electro-Optical & Infrared (EO/IR) Solutions Engineering Team in McKinney, TX, which is part of our Advanced Products & Solutions group.
The Advanced Product and Solutions organization at RTX provides the joint warfighter with actionable information from an unblinking eye across the battlespace. By joining the APS Engineering team you’ll have the opportunity to design, develop and test product capabilities for Active Electronically Scanned Array (AESA) radars, integrated sensor suites, precision targeting, multispectral EO/IR targeting systems, Pilot Situational Awareness, Special mission aircraft and Strategic and tactical ISR Systems.
But more than anything, we are innovators, creators and strategists drawing inspiration from each other every day. We collaborate, iterate, and execute with an eye toward the company mission and personal career growth.
Explore our opportunities today and join us!
What You Will Do
Supports all aspects of a software development life cycle as members of a multi-disciplined team. This would include supporting new and legacy military and commercial programs from concept and requirements, to design, development, integration, test, and potentially subsequent maintenance tasking.
Uses and provides creative solutions to complex technical system and software integration problems.
Works closely with Systems Engineers to design ideal solutions with the end user and operational needs in mind.
The ability to obtain and maintain a Secret U.S. government issued security clearance and a Special Access Program security clearance. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.
Work onsite at McKinney, TX [relocation eligible]
This position will require occasional business-related travel.
Qualifications You Must Have
Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior relevant experience unless prohibited by local laws/regulations.
Development experience on Linux, VxWorks, or other Real Time Operating Systems.
Experience using object-oriented programming and C++ design paradigms.
Experience in developing, testing, and integrating real-time software applications written in C++.
Additional experience in coding using C, C#, Java or closely related software languages.
Working knowledge in computer scripting language such as Shell/Perl/Python.
Experience working with multi-discipline team(s).
Active and transferable U.S. government issued Secret security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.
Qualifications We Prefer
Experience working in lab environments with physical hardware (e.g., test benches, simulators).
Ability to quickly understand and navigate complex systems and established code bases.
Experience with product development utilizing the Scrum techniques of the Agile software development process.
Experience with DevSecOps pipeline implementation and utilization, including Static Code Analysis, Automated Build, and Automated Test techniques using continuous integration/continuous delivery with Test-Driven Development approach.
Hands-on experience with Git for version control and GitLab for repository management.
Ability to manage multiple priorities.
Experienced in developing in CUDA to accelerate compute-intensive workloads on Nvidia GPUs.
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, Innovation, and Safety.
Learn More & Apply Now!
Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
Clearance Information: This position requires security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
If you've been unemployed for 3–6+ months—or longer—you've probably seen how quickly the market can change.
A career gap or an outdated tech stack can reduce callbacks, even when you have talent.
Recruiters may assume your skills are outdated or your confidence is lower.
But gaps don't define ability.
They simply require a strategy: refresh your stack, rebuild proof of work, and re-enter with structure.
Since 2010, SynergisticIT has helped candidates return to the workforce and land full-time jobs at major employers—companies like Google, Apple, PayPal, Visa, Western Union, Wells Fargo, Client, Client, Banking, Walmart Labs, Client, and more—often with offers between $90,000 and $154,000 depending on role and expertise.
Why gaps hurt—and how to neutralize them Employers worry about currency: are your tools current? Can you still perform? The solution is demonstrating recent, relevant work: projects, certifications, and interview readiness.
JOPP helps you rebuild that proof and confidence systematically.
Current role demand (expressed with variety) SynergisticIT commonly supports hiring pipelines for roles such as junior software programmer, Java full stack engineer, Python/Java developer, DevOps/cloud engineer, plus data-track roles like data analyst, BI analyst, data engineer, data scientist, and ML/AI engineer.
The focus areas remain: Java / Full Stack / DevOps and Data Analytics / Data Engineering / Data Science / ML/AI.
Please read our blogs Why do Tech Companies not Hire recent Computer Science Graduates | SynergisticIT What Recruiters Look for in Junior Developers | SynergisticIT Software engineering or Data Science as a career? How OPT Students Can Land Tech Jobs – SynergisticIT Why programs don't fix gaps Many candidates with gaps try "one more course,” but that rarely changes outcomes.
Ideal candidates for gap-to-offer support Professionals returning after layoffs or personal reasons Candidates with limited recent experience but strong potential Recent grads who never launched properly International candidates on F1/OPT with timeline pressure SynergisticIT provides guidance around STEM extension and process support for H-1B/Green Card filing once employed (as applicable through employers).
Want to see credibility and event participation? If you want to explore here are the key links: Event videos (OCW, JavaOne, Gartner): USA Today feature Contact Us: A gap isn't the end of your career.
It's a chapter—and you can write the next one strategically.
Please note: Resume databases are shared with clients and interested clients will reach out directly if they find a qualified candidate for their req.
Resume submissions may be shared with our JOPP team database also.
Please unsubscribe if contacted or if you don't want to be contacted please don't submit your resume.
SUMMARY
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
Recruitment and Retention:
· Recruit and interview Process Technicians.
· Communicate criteria to recruiters for Process Technician position candidates.
· Coach technicians in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements.
Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor Process Technicians to deliver excellence to every internal and external customer.
Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly.
TECHNICAL MANAGEMENT RESPONSIBILITIES
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· Provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
Recruitment and Retention:
· Recruit and interview Process Technicians.
· Communicate criteria to recruiters for Process Technician position candidates.
· Coach technicians in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements.
Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor Process Technicians to deliver excellence to every internal and external customer.
Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly.
TECHNICAL MANAGEMENT RESPONSIBILITIES
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· Provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
Recruitment and Retention:
· Recruit and interview Process Technicians.
· Communicate criteria to recruiters for Process Technician position candidates.
· Coach technicians in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements.
Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor Process Technicians to deliver excellence to every internal and external customer.
Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly.
TECHNICAL MANAGEMENT RESPONSIBILITIES
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· Provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
Recruitment and Retention:
· Recruit and interview Process Technicians.
· Communicate criteria to recruiters for Process Technician position candidates.
· Coach technicians in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements.
Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor Process Technicians to deliver excellence to every internal and external customer.
Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly.
TECHNICAL MANAGEMENT RESPONSIBILITIES
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· Provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
Recruitment and Retention:
· Recruit and interview Process Technicians.
· Communicate criteria to recruiters for Process Technician position candidates.
· Coach technicians in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements.
Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor Process Technicians to deliver excellence to every internal and external customer.
Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly.
TECHNICAL MANAGEMENT RESPONSIBILITIES
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· Provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
Recruitment and Retention:
· Recruit and interview Process Technicians.
· Communicate criteria to recruiters for Process Technician position candidates.
· Coach technicians in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements.
Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor Process Technicians to deliver excellence to every internal and external customer.
Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly.
TECHNICAL MANAGEMENT RESPONSIBILITIES
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· Provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
Remote working/work at home options are available for this role.
Job Summary
The SMT Process Engineer IV is a senior-level technical expert responsible for optimizing and maintaining surface mount technology (SMT) processes to ensure high-quality, efficient, and cost-effective electronic assembly. This role involves advanced troubleshooting, process development, and continuous improvement initiatives across multiple SMT lines, often acting as a lead or mentor within the engineering team. Job ResponsibilitiesLead the development, implementation, and optimization of complex SMT processes, including stencil printing, pick-and-place FUJI, reflow soldering, and automated optical inspection (AOI).
Conduct advanced root cause analysis and implement corrective actions for SMT process defects (e.g., shorts, opens, voids, component placement issues) using statistical process control (SPC) and other analytical tools.
Design and execute experiments (DOE) to improve SMT process robustness, yield, and throughput, focusing on new product introduction (NPI) and existing product enhancements.
Collaborate with design engineering, manufacturing, and quality teams to ensure manufacturability (DFM) and resolve complex technical issues related to SMT assembly.
Develop and maintain comprehensive process documentation, work instructions, and training materials for SMT operators and technicians.
Evaluate and recommend new SMT equipment, materials, and technologies to enhance capabilities and improve manufacturing efficiency.
Provide technical mentorship and guidance to junior engineers and manufacturing personnel on SMT best practices and problem-solving techniques.
Drive continuous improvement projects using Lean manufacturing and Six Sigma methodologies to reduce waste and increase productivity within SMT operations.
Monitor key performance indicators (KPIs) for SMT processes and present findings and recommendations to management.
Ensure compliance with all relevant industry standards, safety regulations, and quality management systems (e.g., ISO, IPC).
Job Qualifications
Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.
8+ years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.
Expert-level knowledge of SMT equipment (e.g., printers, pick-and-place machines, reflow ovens, AOI/SPI) from various manufacturers (e.g., Fuji, Universal, Koh Young, Agilent).
Deep understanding of IPC-A-610 and J-STD-001 standards.
Proficiency in statistical process control (SPC), design of experiments (DOE), and advanced problem-solving methodologies (e.g., 8D, Six Sigma).
Strong analytical skills with the ability to interpret complex data and make data-driven decisions.
Demonstrated ability to lead technical projects and drive process improvements.
Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and mentor others.
Experience with CAD/CAM software for SMT programming and DFM analysis is a plus.
Ability to work effectively in a fast-paced, dynamic manufacturing environment.
Job Summary
The SMT Process Engineer IV is a senior-level technical expert responsible for optimizing and maintaining surface mount technology (SMT) processes to ensure high-quality, efficient, and cost-effective electronic assembly. This role involves advanced troubleshooting, process development, and continuous improvement initiatives across multiple SMT lines, often acting as a lead or mentor within the engineering team. Job ResponsibilitiesLead the development, implementation, and optimization of complex SMT processes, including stencil printing, pick-and-place FUJI, reflow soldering, and automated optical inspection (AOI).
Conduct advanced root cause analysis and implement corrective actions for SMT process defects (e.g., shorts, opens, voids, component placement issues) using statistical process control (SPC) and other analytical tools.
Design and execute experiments (DOE) to improve SMT process robustness, yield, and throughput, focusing on new product introduction (NPI) and existing product enhancements.
Collaborate with design engineering, manufacturing, and quality teams to ensure manufacturability (DFM) and resolve complex technical issues related to SMT assembly.
Develop and maintain comprehensive process documentation, work instructions, and training materials for SMT operators and technicians.
Evaluate and recommend new SMT equipment, materials, and technologies to enhance capabilities and improve manufacturing efficiency.
Provide technical mentorship and guidance to junior engineers and manufacturing personnel on SMT best practices and problem-solving techniques.
Drive continuous improvement projects using Lean manufacturing and Six Sigma methodologies to reduce waste and increase productivity within SMT operations.
Monitor key performance indicators (KPIs) for SMT processes and present findings and recommendations to management.
Ensure compliance with all relevant industry standards, safety regulations, and quality management systems (e.g., ISO, IPC).
Job Qualifications
Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.
8+ years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.
Expert-level knowledge of SMT equipment (e.g., printers, pick-and-place machines, reflow ovens, AOI/SPI) from various manufacturers (e.g., Fuji, Universal, Koh Young, Agilent).
Deep understanding of IPC-A-610 and J-STD-001 standards.
Proficiency in statistical process control (SPC), design of experiments (DOE), and advanced problem-solving methodologies (e.g., 8D, Six Sigma).
Strong analytical skills with the ability to interpret complex data and make data-driven decisions.
Demonstrated ability to lead technical projects and drive process improvements.
Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and mentor others.
Experience with CAD/CAM software for SMT programming and DFM analysis is a plus.
Ability to work effectively in a fast-paced, dynamic manufacturing environment.
Job Summary
The SMT Process Engineer IV is a senior-level technical expert responsible for optimizing and maintaining surface mount technology (SMT) processes to ensure high-quality, efficient, and cost-effective electronic assembly. This role involves advanced troubleshooting, process development, and continuous improvement initiatives across multiple SMT lines, often acting as a lead or mentor within the engineering team. Job ResponsibilitiesLead the development, implementation, and optimization of complex SMT processes, including stencil printing, pick-and-place FUJI, reflow soldering, and automated optical inspection (AOI).
Conduct advanced root cause analysis and implement corrective actions for SMT process defects (e.g., shorts, opens, voids, component placement issues) using statistical process control (SPC) and other analytical tools.
Design and execute experiments (DOE) to improve SMT process robustness, yield, and throughput, focusing on new product introduction (NPI) and existing product enhancements.
Collaborate with design engineering, manufacturing, and quality teams to ensure manufacturability (DFM) and resolve complex technical issues related to SMT assembly.
Develop and maintain comprehensive process documentation, work instructions, and training materials for SMT operators and technicians.
Evaluate and recommend new SMT equipment, materials, and technologies to enhance capabilities and improve manufacturing efficiency.
Provide technical mentorship and guidance to junior engineers and manufacturing personnel on SMT best practices and problem-solving techniques.
Drive continuous improvement projects using Lean manufacturing and Six Sigma methodologies to reduce waste and increase productivity within SMT operations.
Monitor key performance indicators (KPIs) for SMT processes and present findings and recommendations to management.
Ensure compliance with all relevant industry standards, safety regulations, and quality management systems (e.g., ISO, IPC).
Job Qualifications
Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.
8+ years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.
Expert-level knowledge of SMT equipment (e.g., printers, pick-and-place machines, reflow ovens, AOI/SPI) from various manufacturers (e.g., Fuji, Universal, Koh Young, Agilent).
Deep understanding of IPC-A-610 and J-STD-001 standards.
Proficiency in statistical process control (SPC), design of experiments (DOE), and advanced problem-solving methodologies (e.g., 8D, Six Sigma).
Strong analytical skills with the ability to interpret complex data and make data-driven decisions.
Demonstrated ability to lead technical projects and drive process improvements.
Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and mentor others.
Experience with CAD/CAM software for SMT programming and DFM analysis is a plus.
Ability to work effectively in a fast-paced, dynamic manufacturing environment.
The SMT Principal Engineer I at Jabil, Inc. is a senior technical contributor responsible for leading advanced surface mount technology (SMT) process development, optimization, and continuous improvement initiatives across multiple manufacturing lines to ensure high-quality and efficient production of complex electronic assemblies.
Job Responsibilities
- Lead the development, implementation, and optimization of SMT processes, including paste printing, pick-and-place FUJI, reflow soldering, and post-reflow inspection (AOI, X-ray).
- Conduct in-depth analysis of SMT process data, identifying root causes of defects and implementing effective corrective and preventive actions.
- Develop and qualify new SMT equipment, materials, and processes, ensuring seamless integration into existing production environments.
- Provide expert technical guidance and mentorship to junior engineers and production teams on SMT best practices, troubleshooting, and process control.
- Collaborate with design engineering, supply chain, and quality departments to ensure manufacturability (DFM) of new products and resolve SMT-related design issues.
- Drive continuous improvement projects utilizing methodologies such as Six Sigma, Lean Manufacturing, and SPC to enhance SMT yield, throughput, and reliability.
- Author and maintain comprehensive SMT process documentation, including work instructions, process specifications, and failure analysis reports.
- Evaluate and implement new SMT technologies and industry trends to maintain Jabil's competitive edge and address evolving product requirements.
- Lead efforts in root cause analysis for complex SMT failures, implementing robust solutions to prevent recurrence.
- Represent Jabil in technical discussions with customers and suppliers regarding SMT process capabilities and new product introductions.
Job Qualifications
- Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.
- 8-12 years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.
- Strong Knowledge of FUJI Setup, Nexim and Valor
- Demonstrated expertise in SMT equipment operation, programming, and maintenance, including printers, pick-and-place machines (e.g., Fuji, Programming, etc.), reflow ovens, and inspection systems (AOI, SPI, X-ray).
- In-depth knowledge of various soldering technologies, solder paste chemistries, and component packaging.
- Proven track record of leading process improvement projects and achieving significant yield and cost reductions.
- Strong analytical and problem-solving skills with a data-driven approach to decision-making (e.g., SPC, DOE).
- Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and external stakeholders.
- Proficiency in statistical analysis software (e.g., Minitab, JMP) and CAD software for DFM analysis.
- Familiarity with industry standards such as IPC-A-610 and J-STD-001.
- Ability to work independently and manage multiple complex projects simultaneously.
The SMT Principal Engineer I at Jabil, Inc. is a senior technical contributor responsible for leading advanced surface mount technology (SMT) process development, optimization, and continuous improvement initiatives across multiple manufacturing lines to ensure high-quality and efficient production of complex electronic assemblies.
Job Responsibilities
- Lead the development, implementation, and optimization of SMT processes, including paste printing, pick-and-place FUJI, reflow soldering, and post-reflow inspection (AOI, X-ray).
- Conduct in-depth analysis of SMT process data, identifying root causes of defects and implementing effective corrective and preventive actions.
- Develop and qualify new SMT equipment, materials, and processes, ensuring seamless integration into existing production environments.
- Provide expert technical guidance and mentorship to junior engineers and production teams on SMT best practices, troubleshooting, and process control.
- Collaborate with design engineering, supply chain, and quality departments to ensure manufacturability (DFM) of new products and resolve SMT-related design issues.
- Drive continuous improvement projects utilizing methodologies such as Six Sigma, Lean Manufacturing, and SPC to enhance SMT yield, throughput, and reliability.
- Author and maintain comprehensive SMT process documentation, including work instructions, process specifications, and failure analysis reports.
- Evaluate and implement new SMT technologies and industry trends to maintain Jabil's competitive edge and address evolving product requirements.
- Lead efforts in root cause analysis for complex SMT failures, implementing robust solutions to prevent recurrence.
- Represent Jabil in technical discussions with customers and suppliers regarding SMT process capabilities and new product introductions.
Job Qualifications
- Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.
- 8-12 years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.
- Strong Knowledge of FUJI Setup, Nexim and Valor
- Demonstrated expertise in SMT equipment operation, programming, and maintenance, including printers, pick-and-place machines (e.g., Fuji, Programming, etc.), reflow ovens, and inspection systems (AOI, SPI, X-ray).
- In-depth knowledge of various soldering technologies, solder paste chemistries, and component packaging.
- Proven track record of leading process improvement projects and achieving significant yield and cost reductions.
- Strong analytical and problem-solving skills with a data-driven approach to decision-making (e.g., SPC, DOE).
- Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and external stakeholders.
- Proficiency in statistical analysis software (e.g., Minitab, JMP) and CAD software for DFM analysis.
- Familiarity with industry standards such as IPC-A-610 and J-STD-001.
- Ability to work independently and manage multiple complex projects simultaneously.
Job Summary
Lead the development, implementation, and optimization of SMT processes, including paste printing, pick-and-place FUJI, reflow soldering, and post-reflow inspection (AOI, X-ray).
Conduct in-depth analysis of SMT process data, identifying root causes of defects and implementing effective corrective and preventive actions.
Develop and qualify new SMT equipment, materials, and processes, ensuring seamless integration into existing production environments.
Provide expert technical guidance and mentorship to junior engineers and production teams on SMT best practices, troubleshooting, and process control.
Collaborate with design engineering, supply chain, and quality departments to ensure manufacturability (DFM) of new products and resolve SMT-related design issues.
Drive continuous improvement projects utilizing methodologies such as Six Sigma, Lean Manufacturing, and SPC to enhance SMT yield, throughput, and reliability.
Author and maintain comprehensive SMT process documentation, including work instructions, process specifications, and failure analysis reports.
Evaluate and implement new SMT technologies and industry trends to maintain Jabil's competitive edge and address evolving product requirements.
Lead efforts in root cause analysis for complex SMT failures, implementing robust solutions to prevent recurrence.
Represent Jabil in technical discussions with customers and suppliers regarding SMT process capabilities and new product introductions.
Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.
8-12 years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.
Strong Knowledge of FUJI Setup, Nexim and Valor
Demonstrated expertise in SMT equipment operation, programming, and maintenance, including printers, pick-and-place machines (e.g., Fuji, Programming, etc.), reflow ovens, and inspection systems (AOI, SPI, X-ray).
In-depth knowledge of various soldering technologies, solder paste chemistries, and component packaging.
Proven track record of leading process improvement projects and achieving significant yield and cost reductions.
Strong analytical and problem-solving skills with a data-driven approach to decision-making (e.g., SPC, DOE).
Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and external stakeholders.
Proficiency in statistical analysis software (e.g., Minitab, JMP) and CAD software for DFM analysis.
Familiarity with industry standards such as IPC-A-610 and J-STD-001.
Ability to work independently and manage multiple complex projects simultaneously.
Must be local to TX
Role Overview
- He’s ideally looking for someone with 13+ years of experience, strong architecture depth, and the ability to clearly explain designs.
- Must have experience using AI is used in day‑to‑day development.
- Must have experience as a API Developer to lead the development and deployment of our backend services. In this role, you will be the bridge between our PostgreSQL database and React frontend, responsible not only for writing high-performance Python code but also for architecting the CI/CD pipelines that bring our applications to life. You will ensure our integration layers are scalable, secure, and automatically deployed.
Job Summary
We are seeking a Principal-level Full Stack Lead Developer with 13+ years of experience to drive high-priority engineering workstreams. This role is for a technical heavyweight who can lead new projects in parallel with existing leadership while maintaining exceptional architecture depth. You will be responsible for the full lifecycle of high-performance FastAPI and React applications, ensuring they are resilient, observable, and scalable. We expect a leader who views AI development tools as a force multiplier for velocity and can clearly articulate complex design decisions to stakeholders.
Key Responsibilities
- Project Sovereignty: Independently lead and deliver new, complex workstreams from inception to launch, acting as a technical peer to existing leadership (e.g., Sai).
- System Architecture: Design and defend distributed microservices and event-driven architectures. You must be able to clearly whiteboard and communicate design patterns to both technical and non-technical audiences.
- Hands-on Execution: Maintain high-velocity output of clean, production-grade code using FastAPI (Python) and React (TypeScript).
- Platform Reliability: Architect and implement global Error Handling frameworks, centralized Logging (e.g., OpenTelemetry, ELK), and API Management strategies including Rate Limiting and versioning.
- Event-Driven Messaging: Oversee the implementation of asynchronous service communication using ActiveMQ or AWS EventBridge.
- AI-Augmented SDLC: Deeply integrate AI coding tools (e.g., CloudCode, Cursor, GitHub Copilot) into daily workflows to accelerate prototyping, refactoring, and automated testing.
- Engineering Mentorship: Foster a culture of excellence through rigorous code reviews and by unblocking senior engineers on complex technical hurdles.
- Product Collaboration: Work closely with Product Managers to turn high-level roadmaps into technical reality, providing accurate estimates and identifying technical risks early.
Required Skills & Qualifications
- Experience:13+ years of professional software development with a proven track record of leading large-scale products.
- Tech Stack Mastery: Expert-level FastAPI (Async Python) and modern React (Hooks, TypeScript, Performance Profiling).
- Advanced Governance: Hands-on experience with API Gateway patterns, request throttling, and securing distributed systems (OAuth2/JWT).
- Observability & Messaging: Deep knowledge of structured logging, distributed tracing, and message brokers (ActiveMQ or EventBridge).
- AI Tooling: Advanced proficiency in using AI tools for Fast Development to reduce manual overhead and multiply team output.
- Database & Infrastructure: Expert-level PostgreSQL (tuning/indexing), Redis (for caching/rate-limiting), and container orchestration (Kubernetes/Docker).
- Communication: Exceptional ability to translate technical "scars" and architectural risks into clear business impact.
Are you an experienced IT Operations Specialist with a desire to excel? If so, then Talent Software Services may have the job for you! Our client is seeking an experienced IT Operations Specialist to work at their company in Plano, TX.
Position Summary: Following standard operating procedures, Data Centre Operational Services staff provision, operate, monitor, and control a wide variety of sophisticated online computer applications and physical system configurations for a multiple-site, enterprise data processing organisation.
Primary Responsibilities/Accountabilities:
- Staff meet the service needs of both internal and external customers.
- These systems support both patient care and administrative functions throughout *** and affiliations.
- Perform routine tasks to maintain computer equipment and their peripherals.
- Provide prompt and courteous assistance at all times.
- May perform additional functions as detailed by the immediate supervisor, including the installation, move, and de-installation of racks and computer systems.
- Perform shipping and receiving functions for data center hardware and related equipment.
- Inspect deliveries for accuracy and damage; reconcile against purchase orders and packing documentation.
- Process equipment returns (RMA), ensuring proper documentation, packaging, and tracking
- Maintain accurate inventory and asset tracking records
- Assist with diagramming and updating data centre rack configurations
- Ensure proper handling, storage, and physical care of IT equipment. Maintain a clean, organised, and secure data centre staging and storage area
- Equipment racking, connectivity, and cable management. Inventory Management of Onsite Supplies.
- Issue Identification & Escalation: Identify discrepancies, delays, or equipment issues and escalate appropriately to the Project Manager, technical team, or vendor.
- Coordinate with vendors to resolve shipping or hardware issues
- Ensure issues are fully resolved and properly documented
- Documentation & Compliance: Maintain detailed and accurate operational records
Qualifications:
- Knowledge of and proficiency in data center concepts, practices and procedures within field.
- Ability to read, understand and communicate on-line Standard Operations Procedures.
- Ability to understand specified hardware and software used.
- Ability to troubleshoot, prioritize and escalate problems effectively.
- Demonstrates ability to learn and apply new technology.
- Ability to work calmly in difficult situations and form logical conclusions.
- Proficient verbal and written communication skills using English is necessary.
- Associate's degree in Computer Science, Information Systems, Engineering, or a related field.
- Two (2) years of demonstrated technical experience in computer operations.
- High School Diploma or GED.
- Four (4) years of demonstrated IT technical experience focused on computer operations within a large, complex organization.
- Foundational understanding of data center infrastructure, including servers, storage systems, and structured cabling. Basic familiarity with rack layouts and physical hardware configurations.Centre Ability to read and interpret equipment quotes, packing slips, bills of materials, and technical documentation. Understanding of standard data centre safety, compliance, and operational practices. Experience with shipping/receiving operations
Preferred:
- Experience working with healthcare technology.
- Bachelor's degree or higher in Computer Science, Information Systems, Engineering, or a related field.
- This role supports physical infrastructure activities, inventory control, documentation, and coordination with project managers, technical teams, and vendors.
