Engineering Structures Jobs in Longview Texas Remote
458 positions found
Supervisor Laboratory - Lab Admingeneral - Full Time
✦ New
Salary not disclosed
Description Summary: This Job meets the minimum CLIA qualifications of a Laboratory General Supervisor, and under the direction of the Laboratory Director and/or Laboratory Manager, coordinates and manages the day-to-day operations of their specific section(s) and shift(s).
The Laboratory Supervisor serves in an administrative role with direct reports, and functions in an exempt pay status.
In conjunction with the Laboratory Director and/or Laboratory Manager, this Job develops and implements new procedures, instrumentation, quality control, and reagent use.
This Job is also responsible for the development and maintenance of policies and procedures that meet the standards of regulatory agencies and implement service quality improvements.
The Laboratory Supervisor ensures all personnel are held accountable through ongoing personnel performance reviews and assists in the orientation and development of personnel competencies for their section(s).
Responsibilities:Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders.
Is responsible for providing day-to-day supervision of high, moderate, and waived complexity test performance by laboratory testing personnel.
Must be accessible to address technical problems via on-site, telephone, or electronic consultation with testing personnel at any time that testing is performed in accordance with policies and procedures established by the laboratory Medical Director.
Ensures compliance with all policies, procedures, and standards as promulgated by state and federal agencies, the hospital, and other regulatory entities such as CLIA, TJC, CAP, AABB, etc.
Plans, organizes and coordinates the work activities of assigned section(s) and shift(s).
Keeps accurate attendance records on all associates; maintains time and attendance records for the department.
Assists the Director/Manager in maintaining the Laboratory budget to include monthly analysis and variance reporting on expense detail.
Assists the Director/Manager in associate performance conversations that drive merit increases.
Develops, implements, and maintains current procedural manuals of all tests performed in the section(s) assigned and updates and reviews manuals biennially or more often as necessary.
Enforces all safety policies and procedures.
Researches, evaluates and implements new and improved procedures, methodologies, instrumentation, and techniques as assigned by the Director/Manager, or Supervisor.
Implements an appropriate section and/or shift-specific Quality Control Program and maintains all applicable Quality Control and Functional Verification records.
Is responsible for monitoring test analyses and specimen examinations to ensure that acceptable levels of analytic performance are maintained.
Reviews the work done by technologists/technicians working in the section(s) or shift(s) assigned to ensure a minimum of errors and corrective action in the interest of good patient care.
Refers clinical problems to the laboratory director, manager, or supervisor as appropriate.
Assures that all remedial actions are taken whenever test systems deviate from the laboratory's established performance specifications.
Ensures that patient test results are not reported until all corrective actions have been taken and the test system is properly functioning.
Operates, maintains, and troubleshoots all equipment in assigned section(s) to keep in good working order; makes minor repairs andadjustments when necessary; initiates and follows through with Biomedical Engineering/equipment manufacturer for safety checks and repairs; schedules preventive maintenance within the section with Biomedical Engineering, equipment manufacturer, or an outside contractor.
Prepares and submits routine or special administrative and technical reports by due dates as required, requested, or delegated.
Orders and maintains inventories for all necessary supplies and reagents in assigned section(s) to always have an adequate amount on hand.
Trains new technologists and technicians in the assigned section(s) procedures and policies and provides subsequent training in all new or revised procedures and techniques for assigned shift(s) or provides remedial training as necessary.
Responsible for maintaining orientation records on new associates.
Assists the Director/Manager in designing, implementing, collecting, and analyzing data, and reporting all phases of a comprehensive performance improvement program that involves laboratory personnel in Performance Improvement activities.
Prepares and conducts in-service education either formally or informally for assigned section(s) and shift(s).
Provides input on personnel for hire, fire, transfer, interview, disciplinary probation, etc; counsels and documents technical deficiencies.
Performs skills review and competency assessments and maintains appropriate documentation on all technical personnel as delegated by the Laboratory Manager/Director.
Oversees and enforces expectations of personnel in assigned section(s).
Participates in proficiency testing surveys; reviews and evaluates results and maintains copies of survey records in section(s).
Coordinates and attends meetings as required to discuss changes and developments regarding policies, equipment, procedures, staffing, etc.
Utilizes and has a thorough working knowledge of the Laboratory Information System and applications thereof.
Demonstrates competence to perform assigned patient care responsibilities in a manner that meets the population-specific and developmental needs of patients served by the department.
Appropriately adapt assigned patient assessment, treatment, and/or care methods to accommodate the unique physical, psychosocial, cultural, age-specific, and other developmental needs of each patient served.
Processes patient specimens, including collection, handling, and distribution always cognizant of minimal pediatric specimen volumes (when required).
Performs all routine and complicated laboratory procedures in the primary section which assigns age (Pedi) or sex-specific values.
Provides notification and documentation of critical laboratory values obtained.
Calculates, enters, and/or verifies results of laboratory procedures.
Performs all duties in a manner that protects the confidentiality of patients and does not solicit or disclose any confidential information unless it is necessary for the performance of assigned job duties.
Keeps abreast of Medical Technology, by reading Journals, texts, and technical bulletins; attends workshops and seminars; becomes active in localprofessional associations.
Demonstrates adherence to the CORE values of CHRISTUS Health.
Performs other duties as assigned.
Job Requirements:Education/Skills Bachelor's degree or equivalent education in chemical, physical, biological, clinical laboratory science, or medical technology from a regionally accredited college/university or equivalent years of experience required.
Experience 5 years of experience as a Medical Technologist, Clinical Laboratory Scientist, Medical Laboratory Scientist, or Medical Laboratory Technician required.
5 years of full-time primary experience in the specific section of responsibility required.
Licenses, Registrations, or Certifications Active certification or certification eligibility for MT (ASCP), CLS (ASCP), MLS (ASCP), MT (AMT), CLS (NCA/ASCP), or MT (AAB) required.Work Schedule:5 Days
- 8 Hours Work Type:Full Time
The Laboratory Supervisor serves in an administrative role with direct reports, and functions in an exempt pay status.
In conjunction with the Laboratory Director and/or Laboratory Manager, this Job develops and implements new procedures, instrumentation, quality control, and reagent use.
This Job is also responsible for the development and maintenance of policies and procedures that meet the standards of regulatory agencies and implement service quality improvements.
The Laboratory Supervisor ensures all personnel are held accountable through ongoing personnel performance reviews and assists in the orientation and development of personnel competencies for their section(s).
Responsibilities:Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders.
Is responsible for providing day-to-day supervision of high, moderate, and waived complexity test performance by laboratory testing personnel.
Must be accessible to address technical problems via on-site, telephone, or electronic consultation with testing personnel at any time that testing is performed in accordance with policies and procedures established by the laboratory Medical Director.
Ensures compliance with all policies, procedures, and standards as promulgated by state and federal agencies, the hospital, and other regulatory entities such as CLIA, TJC, CAP, AABB, etc.
Plans, organizes and coordinates the work activities of assigned section(s) and shift(s).
Keeps accurate attendance records on all associates; maintains time and attendance records for the department.
Assists the Director/Manager in maintaining the Laboratory budget to include monthly analysis and variance reporting on expense detail.
Assists the Director/Manager in associate performance conversations that drive merit increases.
Develops, implements, and maintains current procedural manuals of all tests performed in the section(s) assigned and updates and reviews manuals biennially or more often as necessary.
Enforces all safety policies and procedures.
Researches, evaluates and implements new and improved procedures, methodologies, instrumentation, and techniques as assigned by the Director/Manager, or Supervisor.
Implements an appropriate section and/or shift-specific Quality Control Program and maintains all applicable Quality Control and Functional Verification records.
Is responsible for monitoring test analyses and specimen examinations to ensure that acceptable levels of analytic performance are maintained.
Reviews the work done by technologists/technicians working in the section(s) or shift(s) assigned to ensure a minimum of errors and corrective action in the interest of good patient care.
Refers clinical problems to the laboratory director, manager, or supervisor as appropriate.
Assures that all remedial actions are taken whenever test systems deviate from the laboratory's established performance specifications.
Ensures that patient test results are not reported until all corrective actions have been taken and the test system is properly functioning.
Operates, maintains, and troubleshoots all equipment in assigned section(s) to keep in good working order; makes minor repairs andadjustments when necessary; initiates and follows through with Biomedical Engineering/equipment manufacturer for safety checks and repairs; schedules preventive maintenance within the section with Biomedical Engineering, equipment manufacturer, or an outside contractor.
Prepares and submits routine or special administrative and technical reports by due dates as required, requested, or delegated.
Orders and maintains inventories for all necessary supplies and reagents in assigned section(s) to always have an adequate amount on hand.
Trains new technologists and technicians in the assigned section(s) procedures and policies and provides subsequent training in all new or revised procedures and techniques for assigned shift(s) or provides remedial training as necessary.
Responsible for maintaining orientation records on new associates.
Assists the Director/Manager in designing, implementing, collecting, and analyzing data, and reporting all phases of a comprehensive performance improvement program that involves laboratory personnel in Performance Improvement activities.
Prepares and conducts in-service education either formally or informally for assigned section(s) and shift(s).
Provides input on personnel for hire, fire, transfer, interview, disciplinary probation, etc; counsels and documents technical deficiencies.
Performs skills review and competency assessments and maintains appropriate documentation on all technical personnel as delegated by the Laboratory Manager/Director.
Oversees and enforces expectations of personnel in assigned section(s).
Participates in proficiency testing surveys; reviews and evaluates results and maintains copies of survey records in section(s).
Coordinates and attends meetings as required to discuss changes and developments regarding policies, equipment, procedures, staffing, etc.
Utilizes and has a thorough working knowledge of the Laboratory Information System and applications thereof.
Demonstrates competence to perform assigned patient care responsibilities in a manner that meets the population-specific and developmental needs of patients served by the department.
Appropriately adapt assigned patient assessment, treatment, and/or care methods to accommodate the unique physical, psychosocial, cultural, age-specific, and other developmental needs of each patient served.
Processes patient specimens, including collection, handling, and distribution always cognizant of minimal pediatric specimen volumes (when required).
Performs all routine and complicated laboratory procedures in the primary section which assigns age (Pedi) or sex-specific values.
Provides notification and documentation of critical laboratory values obtained.
Calculates, enters, and/or verifies results of laboratory procedures.
Performs all duties in a manner that protects the confidentiality of patients and does not solicit or disclose any confidential information unless it is necessary for the performance of assigned job duties.
Keeps abreast of Medical Technology, by reading Journals, texts, and technical bulletins; attends workshops and seminars; becomes active in localprofessional associations.
Demonstrates adherence to the CORE values of CHRISTUS Health.
Performs other duties as assigned.
Job Requirements:Education/Skills Bachelor's degree or equivalent education in chemical, physical, biological, clinical laboratory science, or medical technology from a regionally accredited college/university or equivalent years of experience required.
Experience 5 years of experience as a Medical Technologist, Clinical Laboratory Scientist, Medical Laboratory Scientist, or Medical Laboratory Technician required.
5 years of full-time primary experience in the specific section of responsibility required.
Licenses, Registrations, or Certifications Active certification or certification eligibility for MT (ASCP), CLS (ASCP), MLS (ASCP), MT (AMT), CLS (NCA/ASCP), or MT (AAB) required.Work Schedule:5 Days
- 8 Hours Work Type:Full Time
permanent
L
Locum Physician (MD/DO) - Emergency Medicine in Longview, TX
✦ New
Salary not disclosed
Doctor of Medicine | Emergency Medicine
Location: Longview, TX
Employer: Rhino Medical
Pay: Competitive weekly pay (inquire for details)
Contract Duration: 2 Weeks
Start Date: ASAP
About the Position
LocumJobsOnline is working with Rhino Medical to find a qualified Emergency Medicine MD in Longview, Texas, 75605!
Longview, Texas Emergency Medicine Physician Locum Tenens
Level III Trauma Center | Cross-Credentialed FSED | December 31 Start | Ongoing Coverage Need
Rhino Medical is leading the charge seeking Board Certified Emergency Medicine Physicians (MD/DO) for a high-priority locum tenens assignment at a Level III Trauma Center in Longview, Texas, with cross-credentialing at an affiliated Freestanding Emergency Department (FSED).
This program requires significant, immediate physician coverage due to recent resignations and offers a well-supported MD + APP model, broad specialty backup, and a balanced mix of day, swing, and night shifts.
Assignment Snapshot
- Location: Longview, Texas
- Facility Type: Acute Care Hospital – Level III Trauma Center
- Affiliated Site: Cross-credentialing with Freestanding Emergency Department (FSED)
- Start Date: December 31, 2025
- Contract Type: Locum Tenens (1099)
- EMR: Medhost
Schedule & Shift Structure
Physician Shifts
- Monday–Saturday:
- 6:00 AM – 4:00 PM
- 12:00 PM – 10:00 PM
- 8:00 PM – 6:00 AM
- Sunday:
- 6:00 AM – 2:00 PM
- 1:00 PM – 10:00 PM
- 8:00 PM – 6:00 AM
Coverage Model
- Physician + APP staffing model
- Supervision of APPs required
- Mix of day, swing, and night coverage
Emergency Department Overview
- Annual ED Volume: ~38,000 visits
- Patients Per Hour: ~1.85
- ED Beds: 36
- Hospital Beds: 224
- Trauma Designation: Level III
Provider Requirements
- Board Certification: ABEM or AOBEM (required)
- Licensure: Active Texas medical license
- Certifications Required: ACLS, ATLS, PALS
- Experience: Emergency Medicine experience across all acuity levels
- Supervision: Comfortable supervising APPs
FM/IM-trained physicians are not accepted for this site.
Credentialing
- Temporary / Emergency Privileges: Available
- Estimated Privileging Time: ~90 days
- Pending License Applications: Not accepted
- Cross-Credentialing: Required for affiliated Freestanding ED
Why Physicians Choose This Assignment
- High-priority, well-supported EM program
- Balanced shift options across days, swings, and nights
- Strong specialty backup and inpatient resources
- Cross-credentialing adds scheduling flexibility
- Short-term commitment with consistent monthly volume
- Level III trauma exposure without overwhelming pace
Rhino Medical Support
- White-glove credentialing and onboarding
- Weekly direct deposit + malpractice coverage
- Malpractice coverage provided
- Streamlined scheduling and logistics coordination
This Longview, TX Emergency Medicine locum assignment is ideal for board-certified EM physicians seeking immediate, consistent shifts in a structured, high-functioning trauma program with strong clinical support.
Apply today — Rhino Medical will handle the rest.
Always Forward. Always Focused. Always for You.
About Rhino Medical
At Rhino Medical Services, we don’t just staff locums—we fuel a mission to solve America’s healthcare shortage, one provider at a time. We exist for physicians who want more than just another assignment—who want to be heard, supported, and partnered with by a team that listens first and acts fast. Built on the mindset of aut inveniam viam aut faciam—“I will either find a way or make one”—we approach every opportunity with grit, intention, and heart. Our Tusk Experience is distinctive by design: white-glove service, transparent communication, and a commitment to serving with a sincere heart. You won’t find fluff here—just truth, loyalty, and a relentless drive to be the most referable name in locum tenens. Burn the ships. Join the mission. Choose Rhino.
1620806EXPPLAT
permanent
Speech Pathologist - Physical Therapy - PRN (Hiring Immediately)
🏢 Christus Health
Salary not disclosed
Description
Summary:
As a member of the health care team, evaluates and treats patients with cognitive, communication and swallowing deficits within the scope of a licensed Speech/Language Pathologist. Collaborates with other hospital personnel to ensure quality care for the patient. Supervises the activities of Therapy Technicians, Speech/Language Pathology Clinical Fellows, and Speech/Language Pathology Students.
Responsibilities:
- Gathers pertinent data from chart and other care givers, discusses with physician as necessary
- Independently assess all patient types assigned
- Demonstrates ability to recognize additional needs during evaluation; exercises good judgment in decision
- Interprets results and formulates relevant, measurable, realistic and attainable goals
- Reassess patient progress regularly per department policy, or when need arises
- Identifies appropriate equipment, discusses with patient and family and makes appropriate referral to social services and/or vendor
- Able to assess vent dependent patients with minimal assistance
- Able to assess voice and fluency cases with some assistance
- Able to independently design a treatment plan that address’ identified problems, deficits and discharge needs and assist with reducing LOS
- Consistently delivers effective treatment focused on rehab of communication, cognition and/or swallowing disorders
- Actively seeks out a diagnosis mx to facilitate ability to independently treat throughout the hospital
- Demonstrates skilled expertise when monitoring patients during treatment
- Able to apply reasoning and judgment to skilled observations and reports adverse reactions to physician and/or nursing
- Demonstrates a working knowledge of speaking valve usage and contraindications
- Ensures patient safety
- Offers alternatives to physician when appropriate
- Actively seeks research-based treatments and applies to daily treatment
- Develops creative and innovative ways to provide treatment i.e. group sessions, summer speech camps, structured and interactive adult group/individual sessions
Requirements:
Education/Skills
- Master's Degree
Experience
- Experience preferred
Licenses, Registrations, or Certifications
- SLP License in state of employment
- SLP Intern license is accepted as long as all requirements are met.
- BLS
Work Schedule:
PRN
Work Type:
Per Diem As Needed
temporary
C
CDL-A Truck Drivers - Home Weekly - Avg. $87,000/Year - 3 Months Exp
✦ New
Salary not disclosed
Job Description
C.R. England is Now Hiring CDL-A Truck Drivers!Home Weekly - Drivers Average $87,000 Annually*
- Valid CDL-A and 3+ months of current experience required
- This lane is not suitable for students, recent grads, or trainees
This Dedicated Route Offers:
- Home weekly for a 34-hour rest
- Drivers average $87,000 annually - top 10% earn up to $105,000 per year*
- Mileage pay
- Load pay
- Top-of-the-line sleeper trucks with automatic transmissions pulling 53' dry trailers
Benefits Include:
- Full benefits package for you and your family
- 401(k) participation
- Paid time off & bonus incentives
- Unlimited cash referral program
Route Details:
Family Dollar Oklahoma Fleet is a great account for someone who is looking to drive and to stay active! Drivers will unload the freight using rollers. There are on average of 2-3 loads per week with 2-6 stops per load. Drivers average 1,600 miles per week. Generally 75% of freight delivers in TX and the other 25% in surrounding states, including KS, AR, LA, and MS.
We are looking for dependable drivers to join our team! If you have what it takes to service one of our dedicated customers with the highest degree of customer service and integrity, we want to speak with you.
Requirements:
- Valid CDL-A and 3+ months of current experience required
- This lane is not suitable for students, recent grads, or trainees
- Must be 21 years or older
- Must be able to pass a DOT drug screen
Better Pay, Home Time, and Miles - Apply Now!
Pay Disclaimer:* The job information and data provided here are for informational purposes only, are based in whole or in part on estimates, and do not represent any type of promise or prediction of future performance or employment. PAST PERFORMANCE AND THE INFORMATION CONTAINED HERE ARE NO GUARANTEE OF FUTURE PAY RESULTS, REVENUE, MILES, OR HOME TIME. NO RIGHT TO EMPLOYMENT, CONTINUED EMPLOYMENT, SPECIFIC EMPLOYMENT, OR A MINIMUM AMOUNT OF MILES OR HOME TIME, OR SPECIFIC PAY AMOUNT IS GUARANTEED OR CREATED BY THIS DATA OR THE USE OF THIS SITE. ANY AMOUNTS IN ANY CATEGORIES ON THIS SITE WILL NOT REFLECT ACTUAL FUTURE RESULTS. Your actual pay, mileage, and home time will vary from these numbers depending on many factors, which may include tenure-based pay rates, your fleet, how hard you work, company performance, and how much you drive, among other factors. Because precise rate of pay can be difficult to guarantee in various pay structures common in the transportation industry, you are only guaranteed applicable minimum wage for hours worked in a given pay period. Click here for additional disclaimer information and additional detail about how this data is generated.
C.R. England is Now Hiring CDL-A Truck Drivers!Home Weekly - Drivers Average $87,000 Annually*
- Valid CDL-A and 3+ months of current experience required
- This lane is not suitable for students, recent grads, or trainees
This Dedicated Route Offers:
- Home weekly for a 34-hour rest
- Drivers average $87,000 annually - top 10% earn up to $105,000 per year*
- Mileage pay
- Load pay
- Top-of-the-line sleeper trucks with automatic transmissions pulling 53' dry trailers
Benefits Include:
- Full benefits package for you and your family
- 401(k) participation
- Paid time off & bonus incentives
- Unlimited cash referral program
Route Details:
Family Dollar Oklahoma Fleet is a great account for someone who is looking to drive and to stay active! Drivers will unload the freight using rollers. There are on average of 2-3 loads per week with 2-6 stops per load. Drivers average 1,600 miles per week. Generally 75% of freight delivers in TX and the other 25% in surrounding states, including KS, AR, LA, and MS.
We are looking for dependable drivers to join our team! If you have what it takes to service one of our dedicated customers with the highest degree of customer service and integrity, we want to speak with you.
Requirements:
- Valid CDL-A and 3+ months of current experience required
- This lane is not suitable for students, recent grads, or trainees
- Must be 21 years or older
- Must be able to pass a DOT drug screen
Better Pay, Home Time, and Miles - Apply Now!
Pay Disclaimer:* The job information and data provided here are for informational purposes only, are based in whole or in part on estimates, and do not represent any type of promise or prediction of future performance or employment. PAST PERFORMANCE AND THE INFORMATION CONTAINED HERE ARE NO GUARANTEE OF FUTURE PAY RESULTS, REVENUE, MILES, OR HOME TIME. NO RIGHT TO EMPLOYMENT, CONTINUED EMPLOYMENT, SPECIFIC EMPLOYMENT, OR A MINIMUM AMOUNT OF MILES OR HOME TIME, OR SPECIFIC PAY AMOUNT IS GUARANTEED OR CREATED BY THIS DATA OR THE USE OF THIS SITE. ANY AMOUNTS IN ANY CATEGORIES ON THIS SITE WILL NOT REFLECT ACTUAL FUTURE RESULTS. Your actual pay, mileage, and home time will vary from these numbers depending on many factors, which may include tenure-based pay rates, your fleet, how hard you work, company performance, and how much you drive, among other factors. Because precise rate of pay can be difficult to guarantee in various pay structures common in the transportation industry, you are only guaranteed applicable minimum wage for hours worked in a given pay period. Click here for additional disclaimer information and additional detail about how this data is generated.
Not Specified
Nuclear Engineer
Salary not disclosed
Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.
Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.
What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.
Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.
Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.
Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.
Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.
Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.
Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.
Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.
Specific options depend on the Sailor's status, training, and current Navy policy.
Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.
Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.
Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.
Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.
Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.
It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.
Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.
Not Specified
Lead Mechanical Systems Engineer - Remote Structures and Integration (AUSTIN)
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Integration Engineer – DCI Pipes, Frames and Structures (REMOTE) (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Senior Mechanical Systems Engineer - Remote Structures and Piping (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Integration Engineer – DCI Pipes, Frames and Structures (REMOTE) (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Integration Engineer – DCI Pipes, Frames and Structures (REMOTE) - Cutting-edge Data Center Projects (WASHINGTON)
✦ New 🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
jobs by
✓ All jobs loaded