Engineering Structures Jobs in Kirby, TX

POSITION SUMMARY/RESPONSIBILITIES

Oversees the daily operation of the Histology Laboratory. Maintains adequate quality control systems for specimen processing, embedding, cutting, and staining of slides. Coordinates workflow within the section, ensuring timely availability of slides for pathologists/residents. Ensures compliance with CAP and Joint Commission accreditation and safety requirements.

EDUCATION/EXPERIENCE

Completion of an accredited program in histology and certification as a histotechnician by a recognized certifying agency. Five years' working experience as a histotechnician with certification is required OR ten or more years working as a histotechnician without a certification.

• For gross examinations and renal biopsy adequacy check

o Must have earned associate degree in a chemical or biological science or medical laboratory technology, obtained from an accredited institution,    OR o Education/training equivalent to the above that includes the following:

 60 semester hours or equivalent from an accredited institution. This education must include 24 semester hours of medical laboratory technology courses, OR 24 semester hours of science courses that includes six semester hours of chemistry, six semester hours of biology, and 12 semester hours of chemistry, biology or medical laboratory technology in any combination, AND laboratory training including either completion of a clinical laboratory training program approved or accredited by the ABHES, NAACLS, or other organization approved by HHS (note that this training may be included in the 60 semester hours listed above), OR at least three months of recorded laboratory training in each specialty in which the individual performs high complexity testing.

LICENSURE/CERTIFICATION

Certification as a histotechnician by a recognized certifying agency (if ten or more years of experience, then certification is preferred but not required).

Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.

Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.

What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.

Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.

Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.

Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

MatchPoint Solutions is a fast-growing, young, energetic global IT-Engineering services company with clients across the US. We provide technology solutions to various clients like Uber, Robinhood, Netflix, Airbnb, Google, Sephora, and more! More recently, we have expanded to working internationally in Canada, China, Ireland, UK, Brazil, and India. Through our culture of innovation, we inspire, build, and deliver business results, from idea to outcome. We keep our clients on the cutting edge of the latest technologies and provide solutions by using industry-specific best practices and expertise.

We are excited to be continuously expanding our team. If you are interested in this position, please send over your updated resume. We look forward to hearing from you!

Job Title: INDUSTRIAL ENGINEER

Location: (Remote / Hybrid / On-site – City, Country) SAN ANTONIO,TX

Employment Type: (Full-time / Part-time / Contract) FTE

Pay Range: 70,000- 100,000

Required Experience:

To support Shop Floor Production, Engineering Change Management, updating SOPs/SOSs Time Studies, Line Balancing.

Industrial Engineering activities like setting up standard times at the workstation level using PMTS techniques like MOST, MTM or Modapts.

Ability to identify bottlenecks, issues and working towards process improvements, cycle time improvements using Lean/ WCM principles is a requirement.

Process Improvement by eliminating waste / NVA and improving the existing ways of doing work.

Line Balancing and Time Study, Material handling equipment selection, and Material Flow Optimization

Should be comfortable working in the shop floor environment.

Prepare and present weekly project status to key stakeholders.

Responsibilities:

Scope manufacturing problems and lead brainstorming activities

Develop equipment specifications

Manage equipment relocation

Support quoting and purchasing processes

Line Balancing

Continuous Improvement

Time Study

Oversee installation activities

Validate tools and processes against target results

Required Education & Skills:

Bachelor's degree in Industrial Engineering or foreign equivalent accepted.

Pre-determined motion time study techniques such as MTM/MOST/MODAPTS (Preferred).

AutoCAD.

Lean or WCM Knowledge.

Time Studies,

Line Balancing.

Continuous Improvement

Microsoft Office (Excel/PowerPoint).

MatchPoint Solutions provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

We are an engineering services company and currently number one in our industry. We are growing and looking to add to our team. The primary role of this position will be to provide account management/sales targeting to sell our full line of electrical related and other engineering services. You will perform direct sales and business development activities which contribute to the growth and retention of business to meet or exceed targeted sales goals.

Minimum Qualifications

• Successful outside B2B technical sales experience, preferably in an engineering (electrical), industrial or heavy commercial industry.
• Demonstrated ability to be self-directed and highly motivated.
• Strong interpersonal, communication, written and oral presentation skills and solid understanding of profitability and other financial measurements.
• Strong sales skills including and effective negotiation skills, ability to successfully interact with key customer decision makers and influencers, and ability to prospect new customers and forecast future business.
• Must be able to demonstrate technical knowledge/acumen and consultative skills.
• Required overnight travel 20% of the time.
• Basic computer skills with the following software: Excel, Word, Adobe, Microsoft Outlook.
• Experience working with a CRM

Come make an impact in the Public Sector! Join our team to do meaningful work and support high-impact government missions.

GP Strategies Government Solutions, Inc. Government Training Solutions | GP Strategies, a wholly owned subsidiary of GP Strategies Corporation, focuses on helping every public sector team unlock its full potential through people performance solutions.

Our work directly supports mission critical government agencies, including:

• Air Force

• Army

• Department of Defense (DoD)

• Department of Health & Human Services (HHS)

• Department of Homeland Security

• NASA

• National Highway Institute (NHI) | Federal Highway Administration (FHWA)

• State & Local Governments

Our Mission is meaningful and powerful: to deliver innovative people performance through off the shelf and custom learning, mission specialists, and technology solutions, building deep partnerships with customers to help them achieve measurable mission and company performance improvements.

GP Strategies Corporation, the corporate parent of GP Strategies Government Solutions, is a global leader in talent transformation, dedicated to empowering organizations to unlock their full potential. We help businesses enhance workforce performance and achieve strategic goals through innovative, technology-enabled learning solutions. For over 50 years, with a proven track record of supporting over 6,000 global organizations worldwide, we combine human expertise with AI-driven insights to deliver customized strategies that upskill talent, drive technology adoption, and optimize critical processes.

GP Strategies has an opening for an Aviation Instructor to support a large aerospace client in San Antonio, TX. We are seeking candidates who are able to conduct training covering a broad range of Aircraft electrical, mechanical, structural and systems subject matter including, but not limited to, shield terminations, crimping, bond & ground, soldering, seal, hole drilling, fastener installation/removal, and more. This is a full-time, benefitted position and will involve 50% travel Internationally and throughout the U.S. Background/Experience with heavy aircraft is required.

Job Summary:

• Confers with management/client to understand work situation. Performs needs, job and task analysis to determine training required for trainees to better understand changes in policies, procedures, regulations and technologies.
• Recommends an implementation plan for development of instructional methods and delivery of individual training, group instruction, lectures, demonstrations, conferences, meetings and workshops.
• Designs and develops teaching outlines and specific training to address the client needs by incorporating methods and requirements of instructional systems such as Instructional Systems Development (ISD), Systematic Approach to Training (SAT) or Training Systems Development (TSD) process.
• Selects or develops teaching aids such as training handbooks, demonstration models, multimedia visual aids, computer tutorials and reference works.
• Delivers training sessions covering specified areas of technical specialty.
• Designs and develops exams to measure progress and to evaluate effectiveness of recommended training.
• Evaluates training programs and reports on trainee progress.
• Maintains training programs and materials.
• Travels to client sites as needed.
• This role may require work on multiple shifts.

Qualifications:

• 2-5 years education, training and/or prior experience in electrical, mechanical, or structures systems
• 2-5 years prior teaching/instructor classroom delivery experience
• Ability to travel up to 50% to various client locations throughout the U.S and Internationally
• Background/Experience in one or more of the noted platforms: C-17, 747 or KC46

Desired Skills:

• Engineering Drawings/Interpretation Experience (B/P, Drawings, Specifications, Repair Manuals)
• NACES School Ejection Seat Experience
• Flight Controls – Rigging
• Engineering - Time Compliance Technical Orders (TCTO)
• Flight Controls/Avionics (APU, avionics, breaks, propulsions/engine runs, hydraulics, jacking, landing gear, and doors)
• Background/Experience in one or more of the noted platforms: F-18, F-15, or F-22

PHYSICAL REQUIREMENTS

General physical requirements needed to perform the essential functions of this job may vary based on location of assignment.

Assignment Location – San Antonio, TX

• Sedentary Work – Exerting up to 10 pounds of force occasionally and/or a negligible amount of force frequently or constantly to lift, carry, push, pull or otherwise move objects, including the human body.
• Fingering (typing), communicating, repetitive motions.
• Close visual acuity to prepare and analyze data, view computer monitors and read. May need to view presentation screens and other visual aids in a virtual setting.
• Inside environmental conditions with protection from outside elements.

At GP Strategies Government Solutions culture focuses on performance and revolves around respect, fairness, and working collaboratively to achieve our goals. We support our People, no matter who they are or where they are from, because we all have valuable and unique perspectives and approaches. That's how great ideas are born, which enable us to work smarter.

GP Strategies Government Solutions is committed and proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth and related conditions, sexual orientation, and gender identity), national origin, age, veteran status, disability, or any other federally protected class.

GP Government Solutions is a subsidiary of GP Strategies Corporation, a global workforce-transformation company with over 50 plus years of experience. To find out more, please visit us as

Zinn Insurance is building for 10X growth over the next five years.

We are hiring the operational integrator and true second-in-command to the CEO to design, enforce, and scale the operating model required to achieve it.

This is a scale-stage mandate — not a maintenance role.

You are responsible for building an operating engine that allows revenue to grow without operational fragility.

BOX 1 — The Mandate

Design and enforce the operating system that allows Zinn Insurance to scale without chaos, compliance exposure, or founder dependency.

You convert vision into structured execution across Group, Medicare, and Individual divisions.

You own:

• Workflow architecture and enforcement
• Clear decision rights and accountability
• KPI discipline across every role
• System adoption and operating cadence
• Capacity planning tied to revenue
• Cross-functional alignment (Sales, Finance, Technology)
• Leadership bench depth and succession readiness
• Operational risk visibility and process integrity

If standards slip, you restore them.

If growth strains capacity, you redesign the system.

If founder dependency increases, you reduce it.

You are building infrastructure that outlasts individual effort.

BOX 2 — Performance Outcomes

Within 12 months:

• 95%+ on-time renewal execution
• Revenue leakage materially reduced
• Margin improvement year-over-year
• 100% of roles operating from defined KPIs
• Underperformance addressed directly and early
• CEO removed from day-to-day operational problem solving
• Real-time performance dashboards implemented

Within 3 years:

• Capacity scales ahead of revenue growth
• Systems absorb expansion without breakdown
• Leadership depth established in every division
• Hiring tied to measurable revenue thresholds
• Operational consistency strengthens enterprise value

The company runs on structure.

Not personality. Not escalation. Not reaction. Execution becomes predictable.

Growth becomes controlled.

BOX 3 — Leadership Profile

You are wired to take ownership.

You step into authority without hesitation and make decisions with confidence. You do not require consensus to move forward.

You are direct and performance focused. Approval is not your driver — results are.

You move with urgency. Drift, repeated mistakes, and unclear ownership are corrected immediately.

You value structure. Defined KPIs, documented process, disciplined operating rhythms, and clear standards are non-negotiable.

Your energy is steady and sustainable. You operate with composure under pressure and do not react emotionally to friction.

You think clearly and practically. You diagnose root causes, design scalable systems, and implement solutions without unnecessary complexity.

You believe:

• The right people must be in the right seats
• Accountability is leadership
• Productive tension sharpens performance
• Discipline enables freedom
• Data reveals truth
• Execution drives enterprise value

You can hold standards without rigidity.

You can drive speed without chaos.

You can enforce structure without suffocating initiative.

This role is not for consensus-driven, conflict-avoidant, or validation-dependent leaders.

Growth & Scope

Authority and influence expand as performance is demonstrated.

This role is designed to evolve with the company’s scale. As operational maturity increases, scope broadens to include deeper strategic integration and enterprise-level decision impact.

We are hiring an operational partner capable of building the systems, leaders, and leverage required for a10X company.

If you are wired to build operating leverage at scale — apply:

JOB DESCRIPTION

Insight Global is seeking two Product Specialists to support the build‐out of a brand‐new mobile app experience. The client has delivered high‐level user flows (no visual designs yet), and these roles will translate those flows into clear, build‐ready requirements for engineering teams. This position is ideal for strong Product Analysts or Product Specialists who are comfortable operating with high autonomy, can move quickly in ambiguous environments, and can bridge communication between business, design, and development. Requirements clarity is mission‐critical, as the work involves partnering with external development teams.

REQUIRED SKILLS AND EXPERIENCE

3+ years as a Product Specialist, Product Analyst, Product Owner, or Technical Business Analyst. Experience delivering public‐facing mobile apps (non‐negotiable). Strong understanding of native mobile architecture concepts (iOS/Android), integrations, and backend interactions. Proven ability to write clean, structured user stories and acceptance criteria that reduce rework. Experience working in Agile/Scrum with cross‐functional teams. Strong systems‐thinking skills: ability to work from flows or concepts (before visual design) and produce build‐ready detail. Excellent communication and documentation skills; able to adjust style for business, design, and engineering audiences. Proficiency with Jira, Azure DevOps, and Figma.

• Regional, spinal, and epidural anesthesia
• Pediatrics: Fellowship required

Job ID: 520271

Leviat, a CRH company, is a global leader in lifting, insulating and connecting technology for the construction industry. The company employs nearly 3,000 diverse, talented employees at 60 locations globally. Leviat's engineered products and innovative construction solutions are used in a variety of market segments from residential, non-residential and infrastructure, enabling users to build better, stronger, safer, and faster. We stand together to REINVENT THE WAY OUR WORLD IS BUILT.

Job Summary

The Payroll Administrator position will be responsible for multi-state payroll administration based out of our San Antonio manufacturing facility. The ideal candidate is a detailed and deadline-oriented individual who excels in both the technical and customer service aspects of payroll. This position will report to the Director of Finance.

Job Location

This is a hybrid role based out of our office in San Antonio, TX (Windcrest area)

Job Responsibilities

To perform this job satisfactorily, an individual must be able to perform each essential duty.

• Responsible for all aspects of payroll administration for a defined group of employees, including data entry, reconciliations, tax statuses and adjustments.
• Execute weekly payroll preparation and distribution of the organization's multi-state payroll in accordance with regulations and company policy, using UKG Ready.
• Coordinate the timely and accurate periodic, quarterly and year-end tax filings with third party vendor, including T-4s.
• Receive, enter, answer, and maintain (including filing) garnishments in accordance with federal and state requirements.
• Process VOE (Verification of Employment).
• Review/Approve employee self-service changes via UKG Ready.
• Reconciles general ledger accounts.
• Commission payment calculations.
• Coordinate annual W-2 processing.
• Create and run reports using UKG Ready and BI Reports.
• Stay abreast of current payroll laws and changes and ensure processes and policies follow these rules.
• Support ERP and technology upgrade projects related to payroll as required.
• Perform ad hoc analysis.

Job Requirements

• 3+ years of experience working as a Payroll Admin/Analyst or related
• Must possess a solid understanding of multi-state payroll practices
• Proven track record of excellent customer service
• Strong time management, organizational, and problem-solving skills
• Report writing skills preferred, but not required
• PC proficiency (specifically Microsoft applications) required
• Self-directed and motivated to success and exceed expectations
• High school diploma or equivalent – college degree preferred
• Experience with UKG software preferred
• Strong attention to detail, producing high-quality products and meeting deadlines
• FPC/CPP Certification preferred
• Manufacturing industry experience a plus

What CRH Offers You

• Highly competitive base pay
• Comprehensive medical, dental and disability benefits programs
• Group retirement savings program
• Health and wellness programs
• A diverse and inclusive culture that values opportunity for growth, development, and internal promotion

About CRH

CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization.

If you're up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest!

Leviat, a CRH Company, is an Affirmative Action and Equal Opportunity Employer.

EOE/Vet/Disability

CRH is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law.