Engineering Structures Jobs in Il

Civil Construction Superintendents, apply now!

If you like variety and challenge and take satisfaction from knowing your work supports modern construction, consider applying below. Our client gets projects off to strong starts by designing and constructing a wide variety of projects serving the roadway/highway & bridge markets. Their work improves lives.

Responsibilities

• Attend all required pre job meeting(s)
• Review the scope of each project with the Project Manager and Area Manager prior to beginning work
• Receive and review all union contracts prior to union pre jobs
• Set up job site prior to the start of the project
• Review and understand cost codes prior to starting work
• Communicate and maintain a good working relationship with IDOT, inspectors, subcontractors and owners
• Ensure that all work is completed according to the specifications for the project
• Coordinate all subcontractor operations
• Manage the local union relationship
• Supervise all on site employees for assigned projects.
• Ensure that all EEO requirements are being met or good faith efforts are being made to meet those requirements and that the efforts are documented
• Complete all paperwork as required including but not limited to: daily timesheets with photo documentation, safe cards, weekly tool box talks, onboarding new employees, daily diaries, delivery tickets with cost codes, and fuel receipts
• Send daily timesheets and diary notes from any Foreman completing timecard under the Superintendent's supervision
• Ensure completed quantities are entered daily and accurately
• Generate a two (2) week look ahead schedule on template provided by Project Manager including but not limited to activities, equipment, personnel/craft, permanent or construction material needs, and Q/C testing needs
• Verify that we have utility locates before any excavation is done
• Maintain all tools and equipment assigned to his/her project
• Ensure equipment checklists are completed as necessary
• Guarantee that all required materials and equipment are on site as scheduled/needed
• Ensure the maximum equipment utilization on the project
• Oversee that the work, including the work of Subcontractors, is being done in compliance with OSHA Standards and company policies
• Ensure that tool box talks are conducted on the first day of the work week and the sign in sheets are turned in
• Ensure that safe cards are being done and turned in on a daily basis
• Perform other work related duties as required

Qualifications

• Minimum GED or High School Diploma
• Minimum of 5 years of experience as a Civil Construction Superintendent with a focus on bridges and structures

What's In It For You

Financial Wellbeing

• Compensation $120,000-$150,0000 / year, commensurate with experience
• 401(k) with company match & ESOP
• Flexible spending account (Healthcare & Dependent care)

Health & Wellness

• Medical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and children
• Diabetes Management, Telehealth Coverage, Prescription Drug Plan, Pet Insurance

Family & Lifestyle

• Paid Time Off, Paid Holidays, Bereavement Leave
• Military Leave, including Differential Pay and Benefits Continuation
• Employee Assistance Program

Senior Quality Engineer

Location: Near Barrington, IL

Hire Type: Direct Hire

Salary: $90,000–$105,000/year

Benefits: Medical, Dental, Vision, 401(k) with Match, Life Insurance, Tuition Reimbursement, PTO, Paid Holidays

Sterling Engineering is partnering with a growing manufacturing organization to hire a Senior Quality Engineer to support quality systems, investigations, and continuous improvement initiatives across a diverse set of industries, including aerospace, automotive, medical, energy, robotics, and industrial equipment.

This is a high-impact role for someone who enjoys working cross-functionally, driving quality improvements, and solving complex manufacturing challenges in a fast-paced environment.

Key Responsibilities

• Lead continuous improvement and quality-focused projects across manufacturing operations
• Apply statistical analysis to evaluate production data and drive process improvements
• Partner with internal teams and customers to resolve quality concerns, complaints, and non-conformances
• Drive corrective actions from root cause through implementation and validation
• Support inspection and quality teams with investigations and material disposition
• Conduct internal, customer, and supplier audits as needed
• Utilize tools such as SPC, gage R&R, process capability, regression, and ANOVA to improve manufacturing performance
• Facilitate structured problem-solving using 5-Why, fishbone diagrams, and other methodologies

Qualifications

• Bachelor's degree in Mechanical Engineering, Industrial Engineering, or related field
• 5–8+ years of experience in a manufacturing quality environment
• Experience working with quality standards such as IATF 16949, ISO 13485, and/or AS9100
• Strong knowledge of APQP, PPAP, FMEA, Control Plans, and QMS processes
• Proven experience with corrective actions, root cause analysis, and continuous improvement initiatives
• Proficiency with statistical analysis tools and data-driven decision making
• Experience conducting internal QMS audits
• Background in automotive, aerospace, or medical manufacturing preferred
• Strong communication skills with the ability to collaborate across teams and with external customers

Job Title: Packaging Engineer

Location: North Chicago, IL

Hire Type: Open-ended Contract, Onsite

Target Pay Rate: $40.00 - $45.00/hour (W2)

Benefits: PTO, paid holidays, BCBS Medical plans, Dental/Vision plans, 401(k), and ESOP

Must-Have Skills:

• Packaging design & development experience (materials, structures, functionality)
• Packaging testing & validation expertise (performance, shipping, integrity)
• Manufacturing/plant experience (trials, troubleshooting, production support)

Job Summary:

The Packaging Engineer develops and implements packaging solutions for new and existing products, ensuring functionality, cost-effectiveness, and compatibility with manufacturing. This role supports pharmaceutical and/or combination product packaging through design, testing, validation, and cross-functional collaboration.

Job Duties:

• Design and develop primary, secondary, and tertiary packaging solutions
• Create and maintain packaging documentation (BOMs, specs, assembly instructions)
• Lead packaging validation and ensure compliance with FDA regulations (21 CFR 201, 210, 211)
• Develop and execute testing protocols (performance, container/closure integrity, shipping)
• Conduct plant trials, analyze results, and make recommendations on packaging viability
• Evaluate new materials and technologies to improve performance, cost, and efficiency
• Collaborate with internal teams and external suppliers to meet project timelines
• Support labeling, artwork review, and packaging design verification
• Troubleshoot packaging issues and support manufacturing operations

Qualifications:

• Bachelor's degree in Packaging Science, Packaging Engineering, or related field
• 2+ years of packaging design experience.
• Strong knowledge of packaging materials (corrugate, plastics, cartons, films) and testing methods
• Experience with packaging validation, documentation, and regulatory requirements
• Familiarity with manufacturing processes and packaging equipment (e.g., form-fill-seal)
• Ability to create 2D drawings
• Experience with pharmaceutical or combination product packaging is a plus.

Title: Manufacturing Engineer

Location: Barrington, IL 60010

Hire Type: Direct Hire

Compensation: $115k-130k

Benefits: Medical, Dental, Vision, 401k, PTO, Holiday Pay, Retirement, Life Insurance, and many more….

Overview: Our client is seeking a Manufacturing Engineer for a highly visible role that is designed to evolve into a true subject matter expert position, with clear leadership potential over time. This is an opportunity to own complex manufacturing processes end-to-end, influence technical direction, and become a go-to resource across engineering and operations.

Key Responsibilities:

• Serve as a technical authority for assigned manufacturing processes and product lines
• Lead manufacturing process design, optimization, and validation for precision metal components
• Drive Lean manufacturing and continuous improvement initiatives (yield, cycle time, scrap, cost)
• Partner cross-functionally with Design Engineering, Quality, and Operations on new product introductions
• Develop and improve tooling, fixturing, work instructions, and standard processes
• Troubleshoot complex manufacturing and quality issues using data-driven root cause analysis
• Support capacity planning, capital equipment justification, and implementation
• Mentor junior engineers and technicians; contribute to long-term technical strategy
• Gradually take on informal and formal leadership responsibilities as the role matures

Qualifications:

• Bachelor’s degree in Mechanical, Manufacturing, or Industrial Engineering (or similar)
• 7+ years of manufacturing engineering experience in precision manufacturing environments
• Strong background in metal forming, stamping, springs, or closely related processes preferred
• Experience with Lean manufacturing, process optimization, and root cause analysis
• Ability to operate as both a hands-on problem solver and strategic technical resource
• Strong communication skills and comfort working cross-functionally

Manufacturing Technical Specialist

Location: Rockford, IL

Hire Type: Contract (12 months with strong potential for conversion)

Pay Range: $27–$40/hour (based on experience)

Sterling Engineering is partnering with a leading aerospace manufacturer in the Rockford area to hire a Manufacturing Technical Specialist. This role supports production operations in a high-quality, precision manufacturing environment and is ideal for someone with strong troubleshooting skills, mechanical aptitude, and hands-on manufacturing experience.

Key Responsibilities

• Support daily production operations by executing and maintaining manufacturing processes
• Troubleshoot production and quality issues and assist with implementing corrective actions
• Review and interpret engineering drawings, BOMs, and specifications
• Work closely with production teams to resolve operational challenges and improve efficiency
• Assist with continuous improvement initiatives and updates to standardized work procedures
• Support Lean manufacturing practices and process improvement efforts
• Ensure compliance with safety procedures and quality standards

Qualifications

• 2+ years of experience in manufacturing, production support, or a technical operations role
• Hands-on experience with manufacturing processes such as CNC machining, precision assembly, or production testing
• Ability to read and interpret engineering drawings and blueprints (GD&T preferred)
• Experience troubleshooting mechanical, electrical, or production-related issues
• Familiarity with Lean manufacturing principles or continuous improvement initiatives
• Experience working in a regulated environment (ISO 9001 or similar) is a plus

Controls Engineer – Automation & Robotics (6 Openings)

Location: Elgin, IL (On-site)

Job Type: Direct Hire | Full-Time

Compensation: $95,000 – $150,000 (up to $160,000 for exceptional experience)

Benefits: Comprehensive benefits starting Day 1 (medical, dental, vision, 401k, stock programs, PTO, holidays)

About the Role

We are expanding our Automation Development team and are seeking Controls Engineers to support the design and build of highly advanced, custom automation and robotic equipment for autonomous vehicle production. This is a hands-on role focused on conceptual, in-house engineered systems—not repetitive builds or catalog automation.

Engineers in this group own projects end-to-end, from early concept and proof-of-principle through programming, debug, factory acceptance testing, and on-site integration. The current flagship project supports a next-generation autonomous vehicle platform, with the first production units already shipped.

This role is ideal for Controls Engineers coming from systems integrators or custom machine builders who enjoy variety, ownership, and technically challenging work.

Key Responsibilities

• Design, program, and debug PLC, HMI/SCADA, robotics, servo, and machine vision systems
• Develop control architectures for custom automation and robotic equipment
• Review electrical schematics and contribute to hardware and network architecture
• Perform system bring-up, debugging, validation, and factory acceptance testing
• Collaborate closely with mechanical engineers, assembly teams, and manufacturing
• Support equipment installation and integration at U.S. manufacturing facilities

Travel

• Typical travel averages 10–25% (historically fluctuates by project)
• Travel is limited to 4 U.S. manufacturing locations (California, Texas, Nevada)

Qualifications

• Experience in custom automation, robotics, or systems integration
• PLC programming experience ( Siemens preferred, Rockwell/Allen-Bradley also acceptable )
• Engineers proficient in Rockwell who are open to transitioning to Siemens are strongly encouraged to apply
• Experience with HMI/SCADA platforms (WinCC, Ignition, FactoryTalk, or similar)
• Bachelor’s degree in Electrical Engineering, Controls, Mechatronics, Automation, or related field (or equivalent experience)

Why This Opportunity Stands Out

• Work on fully conceptual, in-house designs with protected intellectual property
• Exposure to cutting-edge autonomous vehicle and robotics technology
• Projects that most automation houses and integrators never get access to
• Strong compensation, Day-1 benefits, and long-term growth potential
• Collaborative engineering culture with high technical standards and visibility

The Construction Superintendent takes part in leading a team of dedicated Foreman and Laborers through the entire project life-cycle. As the Construction Superintendent, you will be involved in pre-construction planning through final completion by planning, directing, and participating in the field operations to ensure projects are completed to company and client standards.

ESSENTIAL DUTIES AND RESPONSIBILTIES:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties and responsibilities.

• Adhere to and uphold all Company safety practices, procedures and policies.
• Direct team activities, establishing task priorities, labor hour management, scheduling and tracking work assignments, providing guidance, and ensuring the availability of resources.
• Assist in coordination of landscape construction activities to meet or exceed both project and company profitability goals.
• Motivate and supervise multiple diversified crews on a daily basis.
• Responsible to drive daily in a company vehicle with or without passengers.
• Working knowledge of Aspire.
• Responsible for submitting accurate and timely paperwork, time records, work orders, reports, and other documents that are required.
• Inspect onsite work activities of company and subcontractor crews to ensure work is being performed correctly and to company standards.
• Correspond with clients, salespersons, construction manager, project manager, foreman, purchasing team, etc. on material status and production planning with a professional working relationship.
• Ability to communicate with customers to ensure constant customer satisfaction.
• Plan for and procure special equipment as needed on a site-by-site basis.
• Review and approve time records, work orders, and change orders in coordination with appropriate departments.
• Assist in the recruiting and selecting of qualified candidates for Foreman, Driver, and Laborer positions. Consider performance appraisals for Foreman, Driver, and Laborer positions in conjunction with construction manager and human resources department.
• Coordinate with Director of Construction Operations and Safety Manager to achieve safety goals by training employees and promoting a safe and positive work environment at all times.
• Create, implement and track rewards programs for construction field employees, if applicable.
• Be willing to work physically alongside Foreman and Laborers as needed.
• Utilize appropriate technologies to facilitate information management and record keeping.
• Communicate and resolve needs, issues, safety concerns and/or problems to supervisor in a timely manner.
• Develop and maintain good communication, high safety standards, and positive relations with coworkers, clients and the public.
• Represent the Company in a positive manner befitting our brand and image.
• Perform other duties as assigned.

SUPERVISORY RESPONSIBILITIES:

• Carry out supervisory responsibilities in accordance with the organization's policies and applicable laws.
• Responsibilities include safety, planning, assigning, and directing work, addressing complaints and resolving problems.

QUALIFICATIONS:

• Five years or more of related experience and/or training; or equivalent combination of education and experience.
• Knowledge of construction building techniques, including but not limited to: hardscapes, irrigation, fencing, bluff development, grading, drainage, planting, lighting, and boulder work. Must have the ability to read and interpret; engineering, structural, grading, drainage, landscape and general construction drawings. General knowledge of village codes and permitting.
• Must demonstrate knowledge of the safety issues, regulations, and procedures utilized in public and private works activities.
• Experience in Aspire is preferred.
• Candidates must have a valid local driver’s license and maintain a good driving record
• Required to pass a post-offer DOT medical physical and drug screen, and (ongoing) periodic DOT physical and drug screen according to DOT guidelines.
• Ability to lift 75 pounds, repetitively and frequently, and perform physical field work.
• Must be 21 years or older.
• Qualified candidates must be legally authorized to work in the United States.
• Ability to effectively present information and respond to questions from clients, managers, co-workers and the general public.
• Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.
• Must be able to communicate in English, including: read, write, and with use of computers and phones.

PERFORMANCE OF DUTIES:

• Employee shall also perform other incidental and related duties as required and assigned or implied from the foregoing, consistent with the background, training and qualifications of Employee or may be reasonably delegated as being in the best interests of the Company.
• The Employee shall devote full time to their employment and expend best efforts on behalf of Company.
• Employee further agrees to abide by all Company policies and decisions now or hereinafter existing.

AMERICANS WITH DISABILITY SPECIFICATIONS:

Physical Demands

• The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
• While performing the duties of this job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop, kneel, twist, crouch or crawl; talk or hear; taste or smell.
• Work requires some physical exertion such as long periods of standing: walking over rough, uneven surfaces; and recurring bending, crouching, stooping and reaching; and frequent lifting of moderately heavy items.
• The employee must occasionally lift and/or move up to 75 pounds. Work requires average physical agility and dexterity.
• Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.

Work Environment

Work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

• While performing the duties of this job, the employee is exposed to weather conditions prevalent at the time.
• Work is performed primarily out-of-doors involving moderate risks, discomfort, or unpleasantness such as a moderate level of noise; dust, grease or mud; moving vehicles or machines; cold, hot and/or wet weather.
• Normal safety precautions are required; and the incumbent may wear some protective clothing and equipment such as rain and snow gear, boots, protective eyewear and gloves.
• The noise level in the work environment is usually moderate.

Overview

The Sr Design Engineer will work in a cross-functional that designs, develops, manufactures, and services tankless water heaters, boilers, and other products. Knowledge of building the entire system as well as individual components is preferred.

Build, assemble, test prototypes, and put together the entire system. Hands-on work and prior exposure to castings, sheet metals, O-rings, water & gas manifolds are necessary. Identify, develop, and manage select suppliers with a variety of the field's concepts, practices, and procedures.

Responsibilities

• Develop, coordinate, and monitor all aspects of the product
• Suggest methods to improve operational efficiency
• Work cross-functionally with different teams and organizations

Qualifications

• Bachelor's degree in Mechanical Engineering or equivalent Ability to read and understand designs and schematics
• Strong problem solving and critical thinking skills
• Ability to multi-task, organize, and prioritize work

Job Title: Electrical Designer

Location: Peoria, IL

Employment Type: Long term

Job Summary

We are seeking an experienced Electrical Designer to support the design and development of off-highway vehicle electrical systems. The ideal candidate will have strong hands-on experience in electrical design and documentation, including 2D/3D drawings, harness routing, enclosure modeling, and BOM creation, with solid exposure to off-highway or heavy equipment applications. This role requires close collaboration with cross-functional and offshore teams to deliver accurate, manufacturable electrical designs.

Key Responsibilities

• Develop detailed electrical design drawings, plans, and diagrams based on design specifications
• Create and maintain 3D models for:
• Enclosure assemblies and installations
• Electrical harnesses, cable routing, and electrical fitment layouts
• Translate sketches, specifications, and verbal instructions into accurate engineering drawings, including:
• Flattened production drawings
• 2D to 3D associative models
• Ensure designs comply with applicable engineering standards, codes, and regulations
• Collaborate with operations and manufacturing teams to identify drawing-related issues
• Work closely with design engineers to clarify design intent and resolve design issues
• Modify and revise drawings based on design changes and engineering feedback
• Create and maintain Bills of Materials (BOMs) and supporting manufacturing documentation
• Coordinate with multi-disciplinary engineering teams to confirm component locations and develop models for:
• Electrical brackets
• Cable trays
• Enclosures and mounting structures
• Maintain accurate engineering documentation, drawing control, and version management
• Work effectively with offshore engineering teams to support design execution
• Demonstrate strong communication and collaboration skills

Required Skills & Experience

• 5–7 years of experience as an Electrical Designer in off-highway or heavy equipment vehicle design
• Strong experience creating electrical drawings, harness layouts, and installation designs
• Proficiency in:
• SolidWorks
• AutoCAD Electrical
• Experience with 2D/3D drawing association and flattened production drawings
• Knowledge of engineering standards and best practices for electrical design
• Experience creating and maintaining BOMs and manufacturing documentation
• Ability to work collaboratively with cross-functional and offshore teams

Preferred Qualifications

• Experience working on construction, mining, or off-highway equipment
• Familiarity with electrical fitment of brackets, trays, and enclosures
• Bachelor’s or Master’s degree in Electrical, Mechanical, or related Engineering discipline

Mechanical Assembler – Structural Enclosures

Pay: up to $30/hr

Shift: 1st Shift | Start as early as 6:00 AM

Type: Ongoing Contract (Strong potential for long-term or direct hire)

We are seeking a hands-on Mechanical Assembler to support the structural build of large industrial enclosure units. This is not a light assembly role—this position focuses on the full structural build process, starting with steel framework and finishing with the installation of exterior components such as siding, doors, and windows.

Candidates with structural assembly, construction, carpentry, or metal fabrication backgrounds are highly encouraged to apply. If you take pride in building things that are square, level, and built to last, this is a great opportunity to put your skills to work in a manufacturing environment.

Key Responsibilities

• Structural Assembly: Build large industrial enclosure units using heavy steel weldments and framework.
• Exterior Installation: Install siding, commercial doors, and windows using proper construction and sealing techniques.
• Blueprint Interpretation: Read and interpret mechanical drawings and blueprints to ensure proper assembly and tolerances.
• Precision Layout: Use measuring tools and leveling techniques to ensure enclosures are square, aligned, and weather-tight.
• Material Handling: Assist with positioning heavy steel frames and moving completed units within the facility.
• Quality & Efficiency: Maintain a strong sense of urgency while ensuring high-quality workmanship.

What We’re Looking For

• Experience in structural assembly, fabrication, construction, or carpentry
• Strong ability to read and interpret blueprints or fabrication drawings
• Experience installing siding, windows, doors, or structural components
• Familiarity with industrial fasteners, sealants, and installation techniques
• Must have a basic personal tool set (impact driver, tape measure, levels, wrenches, etc.)
• Strong communication and organization skills
• Basic electrical experience is a plus, but not required

Why This Role?

• Opportunity to work on large, custom-built industrial units
• Hands-on role where craftsmanship and precision matter
• Stable first shift schedule
• Potential to transition into a long-term or permanent position

If you enjoy building and assembling large structural systems and want to be part of a team that creates complex industrial equipment, we’d like to connect with you.

Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or genetic information.