Engineering Structures Jobs in Hawthorne
196 positions found — Page 3
At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Millennium Space Systems (MSS), a part of Boeing Defense, Space and Security (BDS), is a fast, agile small satellite company focused on national security space. Our missions have direct impact to global security, like missile warning and Earth observation.
Our team is curious, bold and innovative. We take risks, innovate and explore new techniques and technologies. We influence change because we challenge the status quo. And when we watch our satellites launch, we know each one of us made it happen.
Millennium Space Systems (MSS) has an exciting opportunity for a Senior Spacecraft Harness Engineer (Level 4 or Level 5) to join the MSS team in El Segundo, CA!
In this role, you will be working in missions with continuous changing requirements and expectations, typical of research & development (R&D) environments, and support transitioning missions into high-rate production.
We are looking for talented individuals who can manage complex interfaces and are willing to innovate. Talented individuals with strong foundations in cable & harness design and/or printed wiring board design, such as rigid printed circuit board or flex-based circuit board for our interconnect solutions. Our engineers possess a strong foundation and knowledge of space vehicle, spacecraft, and/or payload logical architecture. From proposal creation to designing schematics to working hands on in the harness lab to watching a satellite being pushed onto a truck and taken to the launch site, you'll have a hand in it all.
Strong communication and organizational skills are critical to success in this position, along with the ability to build strong relationships, collaborate in a cross-functional environment, and utilize problem-solving skills to proactively identify and manage risks and opportunities.
Position Responsibilities:
- Development & analysis of EWIS architectures for multiple programs and bus configurations from mission and scientific payloads to experimental LEO small satellites to MEO constellations and GEO vehicles.
- Generation of subsystem or unit-to-unit electrical block diagrams.
- Definition and documentation of signal connectivity through cross functional coordination with system, subsystem, and product engineers for spacecraft harness or printed wiring board design.
- Selection of harness components and hardware, such connectors, backshells, and wire/cable based on applicable satellite mission requirements and industry standards.
- Performance of voltage drop analysis, power current derating, and capacitance circuit analysis for harness and printed wiring boards.
- Development and analysis of PCB designs determination board form factor, schematic capture, board stack determination, component placement and trace routing.
- Generation of rigid or rigid-flex PCB, PCB Assembly Drawings, fabrication & assembly output files (Geber, ODB , etc.)
- Generation harness schematic diagrams, wire diagrams, and wire harness assembly drawings.
- Preparation and generation of harness acceptance testing procedures including the development of harness test scripts for cable testers.
- Participation of critical programmatic milestones (Preliminary Design Reviews, Critical Design Reviews, etc.) including the preparation of data packages, conduction of design reviews, and closure of any liens from the Milestone Decision Authority (MDA).
- Support assembly and testing of FlatSat and flight harnesses while reporting on cost and schedule performance.
- Capture of as-built, made on assembly mockup harness builds to produce 2D/3D formboards.
- Support with the creation, maintenance, or update of harness design, assembly, and test standards and command media.
- Support in proposals and business development efforts as the responsible engineering authority (REA).
- Management of external suppliers and subcontractors for harness and printed circuit board delivery.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Top Secret/SCI Clearance Post-Start is required.
Basic Qualifications (Required Skills/Experience):
- Bachelor's Degree or higher from an accredited course of study in engineering, computer science, mathematics or physics
- 3+ year of experience in wire harness design, wire harness installation or equipment installation
- Experience in a role that required excellent communication, collaboration, and interpersonal skills
- Experience interfacing with all engineering disciplines and be able to work in a team environment and work independently as required
- 3+ years of experience with engineering release processes, engineering requirements, and document moderation
- Ability to help develop, mentor and coach less experienced staff
Preferred Qualifications (Desired Skills/Experience):
- Active DoD TS or TS/SCI Clearance.
- Experience performing aircraft and/or spacecraft bench or flight line operational checkout, trouble-shooting, adjustment and repair of any electrical or electronic system
- Experience with the successful design and delivery of spacecraft or aircraft wire harnesses and/or printed circuit boards. Rigid-flex PCB design preferred.
- Experience with early life-cycle satellite engineering activities, spacecraft integration and test, and launch operations.
- 3+ years of experience with Earned Value Management Systems (EVMS).
- Experience with Mentor Graphics Capital tool
- Experience using Electrical Design Automation (EDA) Tools such as (e.g. OrCAD, Mentor Graphics, Altium, PSPICE) to perform schematic capture, PCB design/layout, and circuit simulation
- Knowledge of harness design standards and specifications for spaceflight applications (MIL-HDBK-83575, MIL-HDBK-863, SAE AS50881, etc.).
- Knowledge of PCB design standard and specifications (IPC-2221, 2222, 2223, IPC-A-600, etc.)
- Knowledge of military standards of connectors, wires, and contacts for aerospace applications (MIL-DTL-38999, MIL-DTL-24308, MIL-DTL-83513, NEMA-WC27500, SAE-AS22759, etc.)
- Level 4 & 5: 5 or more years' related work experience or an equivalent combination of education and experience
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Travel: Occasional travel may be required
Shift: 1st Shift
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Total Rewards & Pay Transparency:
At Millennium Space Systems, a Boeing Company, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
Millennium Space Systems also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range:
Level 4: $146,200 - $197,800
Level 5: $176,800 - $239,200
Applications for this position will be accepted until March 25, 2026
Millennium is DDTC-registered, ITAR-compliant Company. This position is located at a facility that requires special access. Applicants MUST be U.S. citizens and eligible for a security clearance. Additionally, applicants must be willing to apply for and maintain a security clearance. We encourage all interested candidates to apply for any open position for which they feel they are qualified.
Applications for this position will be accepted until Mar. 26, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Education
Bachelor's Degree or Equivalent Required
Relocation
Relocation assistance is not a negotiable benefit for this position.
Security Clearance
This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship . click apply for full job details
Job Description At Boeing, we innovate and collaborate to make the world a better place.
We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Millennium Space Systems, a part of Boeing Defense, Space and Security (BDS), is a fast, agile small satellite company focused on national security space.
Our missions have direct impact to global security, like missile warning and Earth observation.
Our team is curious, bold and innovative.
We take risks, innovate and explore new techniques and technologies.
We influence change because we challenge the status quo.
And when we watch our satellites launch, we know each one of us made it happen.
As a Manufacturing Engineer
- Harness, you will be responsible for developing, qualifying, and implementing manufacturing processes and procedures to build and test flight and non-flight cable harness assemblies.
You will be the manufacturing liaison for engineering and be responsible for reviewing harnessing drawings, writing work instructions, supporting production, and working with engineering to optimize manufacturing.
This role requires the ability to work second shift.
This position's internal job code is Manufacturing Engineer.
Our team is currently hiring for levels 3-4.
Position Responsibilities: Act as the connector between the design engineering and manufacturing organizations Identify improvement opportunities and execute initiatives to ensure product quality, reduce lead time, decrease labor hours, maintain safe operations, etc.
Troubleshoot production issues, identify root causes, and drive implementation of corrective actions for non-conformances Create process plans, standard operating procedures, Bill of Materials (BOM), and rework instructions for all manufacturing items within your ownership Conduct reviews of drawings, standards, and other releasable documents Collaborate with design engineers to ensure manufacturability of wire harnesses and provide feedback on design improvements Work within cross-functional teams including quality engineering, manufacturing operations, and supply chain to bring products from new product introduction (NPI) to full-scale production Basic Qualifications (Required Skills/Experience): Bachelor's degree in an engineering discipline 3 years working in a harness/cable assembly environment Familiarity with IPC-WHMA-A-620, NASA-STD-8739.4, and IPC J-STD-001 Technical problem-solving skills, including root cause analysis complete with sound engineering based corrective actions Experience with MES, MRP, and ERP systems Excellent written, verbal communication, and interpersonal skills Preferred Qualifications (Desired Skills/Experience): 5 years of experience in a harness manufacturing and design (electrical & integration) environment Experience in a high-rate manufacturing environment Strong understanding of electrical schematics, wiring diagrams, and harness acceptance testing Writing test scripts, experience with Cirris CH2 and Weetech testers Competency using 3D CAD modeling and PDM software (Solidworks, etc) Exposure to harness design software (Capital, Zuken, etc) Familiarity with lean manufacturing principles and Six Sigma methodologies Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process Drug Free Workplace: Millennium Space Systems, a Boeing Company, is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Total Rewards: At Millennium Space Systems, a Boeing Company, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
Millennium Space Systems also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: Level 3: $96,050
- $141,250 Level 4: $117,300
- $172,500 Millennium is DDTC-registered, ITAR-compliant Company.
This position is located at a facility that requires special access.
Applicants MUST be U.S.
citizens and eligible for a security clearance.
Additionally, applicants must be willing to apply for and maintain a security clearance.
We encourage all interested candidates to apply for any open position for which they feel they are qualified.
Applications for this position will be accepted until May.
31, 2026 Export Control Requirements: This position must meet U.S.
export control compliance requirements.
To meet U.S.
export control compliance requirements, a "U.S.
Person" as defined by 22 C.F.R.
§120.62 is required.
"U.S.
Person" includes U.S.
Citizen, U.S.
National, lawful permanent resident, refugee, or asylee.
Export Control Details: US based job, US Person required Relocation Relocation assistance is not a negotiable benefit for this position.
Security Clearance This position requires the ability to obtain a U.S.
Security Clearance for which the U.S.
Government requires U.S.
Citizenship.
An interim and/or final U.S.
Top Secret Clearance Post-Start is required.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for 2nd shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.aa415a4b-8b21-40fc-a65c-70d2b25ca29a
Akkodis is seeking an Industrial Engineer for a Contract job with a client in Carson, CA. Ideally looking for applicants who can provide Industrial Engineering support and coordination during the development of aircraft interior components and will be responsible for determining most cost-effective methods to create products. Focal for industrialization on each new program.
Rate Range: $32/hour to $35/hour; The rate may be negotiable based on experience, education, geographic location, and other factors.
Qualifications:
Specialized knowledge
Collaboration – Establishes collaborative relationships to achieve objectives
Communication – Excellent interpersonal and communication (written and verbal) skills
Ability to work independently and follow through on assignments with limited direction; ability to work within and lead in a team oriented environment
Excellent attention to detail.
Project and general management experience
Experience in manufacturing line set-up
Self-motivated and multi-tasker; able to level load own workload.
Level 1 Qualifications:
Education: BS in Industrial, Aeronautical, Mechanical Engineering or Manufacturing Engineering.
Experience: 0-3 years.
Computer Skills: Proficient with Windows Operating System, Office XP, AutoCAD.
Other Skills: Experience with airworthiness regulations desired. Basic Knowledge of Primary processes like CNC machining, Layup and Crush Core. Ability to work well independently and cross-functionally.
Description: Entry-level position within job field.
Level 2 Qualifications:
Education: BS in Industrial, Aeronautical, Mechanical Engineering or Manufacturing Engineering
Experience: 4-5 years.
Computer Skills: Proficient with Windows Operating System, Office XP., AutoCAD. Knowledge of design software
Other Skills: Experience with airworthiness regulations & LEAN tools such as valve stream mapping (VSM) "5S". Strong Knowledge of Primary processes like CNC machining, Layup and Crush Core.
Description: Intermediate-Mid Level position within job field.
If you are interested in this role, then please click APPLY NOW. For other opportunities available at Akkodis, or any questions, feel free to contact me at 61 or
Equal Opportunity Employer/Veterans/Disabled
Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, an EAP program, commuter benefits, and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs that are direct hires to a client.
To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:
· The California Fair Chance Act
· Los Angeles City Fair Chance Ordinance
· Los Angeles County Fair Chance Ordinance for Employers
· San Francisco Fair Chance Ordinance
At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Millennium Space Systems, a part of Boeing Defense, Space and Security (BDS), is a fast, agile small satellite company focused on national security space. Our missions have direct impact to global security, like missile warning and Earth observation.
Our team is curious, bold and innovative. We take risks, innovate and explore new techniques and technologies. We influence change because we challenge the status quo. And when we watch our satellites launch, we know each one of us made it happen.
As a Mission Analysis Engineer on the Mission Analysis Engineering Team, you will be the Responsible Engineering Authority (REA) for all modeling, simulation, and analysis for a program, study, or proposal. You will develop methods to simulate mission scenarios and assess end-to-end constellation capabilities; design and implement image processing, inertial tracking, state estimation, and optimal control algorithms for sensor systems; and provide tools and modeling platforms for validating system performance during on-orbit mission operations.
You will work shoulder-to-shoulder with technical and program leadership and will be responsible for program management activities, to ensure that high-quality work products are delivered on time and that the proposed mission solution meets the customer's need.
Position Responsibilities:
- Build and maintain simulations for large satellite constellations to assess effectiveness against mission requirements
- Own the Electro-Optical/Infrared (EO/IR) image processing algorithms chain, from photon to Warfighter
- Create models for space vehicle payloads to use in system trades and performance predictions
- Develop novel algorithms, models, and data processing schemes for EO/IR sensing and tracking systems
- Concepts of Operation (CONOPS)/Design Reference Mission (DRM) development, modeling, and simulation
- Collaborate with software and firmware teams to develop platforms for simulation deployment (eg. software/hardware-in-the-loop)
Security Clearance and Export Control Requirements:
This position requires the ability to obtain a U.S. Security Clearance. for which the US Government requires U.S. Citizenship. A final U.S. Top Secret security clearance is required post start.
Basic Qualifications (Required Skills / Experience):
- 9+ years experience in aerospace systems design, analysis, and/or operation
- Bachelor's degree in engineering or the physical sciences / computer science
- Experience in modeling and simulation of complex satellite systems using common tools such as Matlab/Simulink, Python, or C++
- Experience with EO/IR optical systems and image processing algorithms
- Experience in orbital mechanics and kinematic state estimation
- This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Top Secret Clearance Post-Start is required.
Preferred Qualifications (Desired Skills/Experience):
- 14+ years' experience in satellite design and/or operation
- Experience with government furnished image models like ASSET, PRA Toolkit, or AFSIM
- Proficiency with hardware development languages such as VHDL, Verilog, Vitis Model Composer
- Experience with satellite space-to-space communication networks
- Technical leadership experience, including requirements V&V, delegation and management of technical tasks, responsible engineering authority (REA) experience, and cost account management (CAM) experience.
- Possess active TS/SCI clearance
Conflict of Interest:
Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process
Drug Free Workplace:
Millennium Space Systems, a Boeing Company, is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Total Rewards:
At Millennium Space Systems, a Boeing Company, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
Millennium Space Systems also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary Pay Range:
- Level 4: $135,150 - $198,750
- Level 5: $164,050 - $241,250
Millennium is DDTC-registered, ITAR-compliant Company. This position is located at a facility that requires special access. Applicants MUST be U.S. citizens and eligible for a security clearance. Additionally, applicants must be willing to apply for and maintain a security clearance. We encourage all interested candidates to apply for any open position for which they feel they are qualified.
Applications for this position will be accepted until Apr. 30, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Relocation
Relocation assistance is not a negotiable benefit for this position.
Security Clearance
This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Top Secret Clearance Post-Start is required.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description At Boeing, we innovate and collaborate to make the world a better place.
We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Millennium Space Systems, A Boeing Company, delivers affordable, high-performance space systems for exacting customers.
At Millennium, you will be part of a close-knit team working on exciting technological problems.
We work in an open environment where ideas are shared across all disciplines, and there are ample opportunities for advancement based on excellence.
Superstars are welcome.
At Millennium, we innovate and collaborate to make the world a better place.
From the seabed to outer space, you can contribute to work that matters with a company committed to fostering an environment for every teammate that's welcoming, respectful and innovative, with great opportunities for professional growth.
Find your future with us.
Job Summary As a Mission Analysis Engineer on the Mission Analysis Engineering Team, you will be the Responsible Engineering Authority (REA) for all modeling, simulation, and analysis for a program, study, or proposal.
You will develop methods to simulate mission scenarios and assess end-to-end constellation capabilities; design and implement image processing, inertial tracking, state estimation, and optimal control algorithms for sensor systems; and provide tools and modeling platforms for validating system performance during on-orbit mission operations.
You will work shoulder-to-shoulder with technical and program leadership and will be responsible for program management activities, to ensure that high-quality work products are delivered on time and that the proposed mission solution meets the customer's need.
Position Responsibilities: Build and maintain simulations for large satellite constellations to assess effectiveness against mission requirements Own the Electro-Optical/Infrared (EO/IR) image processing algorithms chain, from photon to Warfighter Create models for space vehicle payloads to use in system trades and performance predictions Develop novel algorithms, models, and data processing schemes for EO/IR sensing and tracking systems Concepts of Operation (CONOPS)/Design Reference Mission (DRM) development, modeling, and simulation Collaborate with software and firmware teams to develop platforms for simulation deployment (eg.
software/hardware-in-the-loop) Basic Qualifications (Required Skills / Experience): 5 years experience in aerospace systems design, analysis, and/or operation Bachelor's degree in engineering or the physical sciences / computer science Experience in modeling and simulation of complex satellite systems using common tools such as Matlab/Simulink, Python, or C++ Experience with EO/IR optical systems and image processing algorithms Experience in orbital mechanics and kinematic state estimation This position requires the ability to obtain a U.S.
Security Clearance for which the U.S.
Government requires U.S.
Citizenship.
An interim and/or final U.S.
Top Secret Clearance Post-Start is required.
Preferred Qualifications (Desired Skills/Experience): 7 years' experience in satellite design and/or operation Experience with government furnished image models like ASSET, PRA Toolkit, or AFSIM Proficiency with hardware development languages such as VHDL, Verilog, Vitis Model Composer Experience with satellite space-to-space communication networks Technical leadership experience, including requirements V&V, delegation and management of technical tasks, responsible engineering authority (REA) experience, and cost account management (CAM) experience.
Possess active TS/SCI clearance Drug Free Workplace: Millennium is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Pay & Benefits: Millennium Space Systems, A Boeing Company, offers a very competitive benefits package to include medical, dental, vision, and 401k plan.
Summary Pay Range: Level 3: $108,800
- $160,000 Before applying, please note: Millennium is DDTC-registered, ITAR-compliant Company.
This position is located at a facility that requires special access.
Applicants MUST be U.S.
citizens and eligible for a security clearance.
Additionally, applicants must be willing to apply for and maintain a security clearance.
We encourage all interested candidates to apply for any open position for which they feel they are qualified.
This position is expected to be 100% onsite.
The selected candidate will be required to work on-site at one of the listed location options.
Applications for this position will be accepted until Mar.
20, 2026 Export Control Requirements: This position must meet U.S.
export control compliance requirements.
To meet U.S.
export control compliance requirements, a "U.S.
Person" as defined by 22 C.F.R.
§120.62 is required.
"U.S.
Person" includes U.S.
Citizen, U.S.
National, lawful permanent resident, refugee, or asylee.
Export Control Details: US based job, US Person required Relocation Relocation assistance is not a negotiable benefit for this position.
Security Clearance This position requires the ability to obtain a U.S.
Security Clearance for which the U.S.
Government requires U.S.
Citizenship.
An interim and/or final U.S.
Top Secret Clearance Post-Start is required.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.aa415a4b-8b21-40fc-a65c-70d2b25ca29a
As a Lead Electrical Engineer, the candidate must have experience with L band RF systems, able to work from customer requirements to derive additional requirements, define the architecture of a possible solution based on requirements, setup a requirements schema & link requirements to documents (systems/subsystem specification, hardware/RF architecture description document, etc.) and flow down applicable requirements to other groups (software, ASIC, & test) so that they can contribute to realize the end solution based on the proposed architecture.
The Lead EE will also oversee the development a qualification test plan that will ensure that the architecture and solution satisfy the customers’ requirements.
The Lead EE will also work with subject matter experts in the areas of GPS signal processing, anti-jam signal processing, other hardware design team members, control software, and government qualification standards.
As a Lead EE, the candidate is expected to understand each aspect of the technology used in the proposed solution.
The Lead EE also must work with the cost account manager, program management, and project management to develop the solution within the program’s budget and schedule.
Essential Functions: Requires comprehensive level knowledge of Electrical Engineering low frequency and high frequency (RF) Analog and Digital circuit design.
Experience with RF systems, ideally GPS receivers Able to contribute to providing innovative Electrical Engineering solutions consistent with business development plans.
Ability to develop circuit designs, requirements, design descriptions, verification plans/procedures, customer CDRLs to meet program schedules.
Ability to support cross functional teams for cross functional conflict resolution, Root Cause Analysis, blank page architecture developments and design Ability to contribute to algorithm development, analysis, implementation, system architecture, verification, and Test with emphasis on military GPS electronics.
Ability to contribute to execution of design, build, integration and test activities, problem resolution and verifying that the deliverable products meet all program and customer requirements.
Ability to provide project management reports as required, support senior level and customer reviews as necessary.
Ability to provide inputs and reviews of the engineering technical baseline as part of proposal efforts.
Ability to interface with the program’s leadership and other teams (SW, Systems, ME, and Test) on a frequent basis, conduct or participate in customer and/or program technical review presentations, and provide progress status updates on work products.
Ability to participate or lead in the product development process including design reviews.
5 to 10% Travel required.
Must have Secret Security Clearance or be able to obtain a US security clearance.
Qualifications: Required Education/Experience: Requires mastery level knowledge within a specific technical area or multiple job areas.
Viewed as an expert and/or resource within the field by peers in and outside the organization.
Bachelor’s Degree and a minimum of 9 years of prior relevant experience.
Graduate Degree and a minimum of 7 years of prior related experience.
In lieu of a degree, a minimum of 13 years of prior related experience.
Minimum of 5 years’ experience in ability to capture schematics design and PCBA Layout using modern EE CAD such as Altium or Mentor Graphics.
5 years’ experience with project management and product design team leadership guided by individual annual goals and objectives with minimal oversight or direction; working in a team environment as an individual contributor.
6 years’ strong experience with receiver, Antenna, or Radio design (i.e.
RF).
4 years’ experience with embedded Hardware design.
2 years’ experience with FPGA design with emphasis in digital signal processing (DSP) 4 years’ experience demonstrating strong verbal and written skills 7 Years experience with design tools such as MATLAB/Simulink, P-Spice, Agilent ADS (or AWR), Schematics Capturing/PCBA Layout tools such as Altium, and Ansys HFSS 2 Years’ experience with FPGA design tools such as Xilinx ISE, Xilinx EDK, and ModelSim Must have Secret Security Clearance or be able to obtain a US security clearance.
Preferred Additional Skills: Strong familiarity with GPS Module design and topology.
Advanced with High-speed Analog design methodologies.
Advanced in MS Office, design tools such as Simulink/MATLAB, P-Spice, Altium (Schematics Capturing & PCBA Layout), Agilent ADS (or AWR), and Ansys HFSS.
Familiar with FPGA design methodologies.
Proficient with DO-254 design.
In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is Min $127,500.00
- $ 236,500.00 Max.
The salary range for this role in Colorado state, Hawaii, Illinois, Maryland, Minnesota, New York state, Cleveland Ohio, and Vermont is $110,500.00 Min
- $205,500.00 Max.
This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location.
L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays.
The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.
LI-KM1 L3Harris Technologies is proud to be an Equal Opportunity Employer.
L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination.
All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws.
L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
Please be aware many of our positions require the ability to obtain a security clearance.
Security clearances may only be granted to U.S.
citizens.
In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
L3Harris Technologies is an E-Verify Employer.
Please click here for the E-Verify Poster in English or Spanish .
For information regarding your Right To Work, please click here for English or Spanish .
d24ad0b8-823f-4e68-a892-2986ccdf7392
At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Millennium Space Systems, a part of Boeing Defense, Space and Security (BDS), is a fast, agile small satellite company focused on national security space. Our missions have direct impact to global security, like missile warning and Earth observation.
Our team is curious, bold and innovative. We take risks, innovate and explore new techniques and technologies. We influence change because we challenge the status quo. And when we watch our satellites launch, we know each one of us made it happen.
The Guidance, Navigation, and Controls (GNC) Engineer is the Responsible Engineering Authority (REA) for delivery of the GNC subsystem for a program and/or constellation. This includes subsystem/system level analysis to ensure requirements compliance, sensor and actuator selection, and Flight Control Software (FCSW) development and validation. Engineers in the GNC group are integral throughout the entire program lifecycle, providing mission and system design inputs, critical analysis products, software/algorithm development, support to satellite integration and test (I&T), and on-console support for on-orbit operations.
As a GNC REA at the Lead/Senior level, you will be the leader for the GNC subsystem for a given program/constellation. In addition to technical execution, it is critically important that engineers in this position are capable of management of a complex project, ensuring that high-quality work products are delivered on-time. This requires working familiarity with project management techniques, as well as an ability to identify, track, and mitigate subsystem risks in order to meet program execution objectives .
This position's internal job code is Guidance, Nav & Controls Engr . Our team is currently hiring for level 4.
Position Responsibilities:
- Deliver the GNC subsystem (hardware, software, and analysis) for a satellite program
- Perform GNC subsystem design, analysis, software development, and component selection to meet program requirements
- Manage the development of GNC products within the constraints of program cost and schedule
- Report technical execution progress to program and company leadership, and track/mitigate risk
- Interface with other satellite subsystems as well as systems engineering and program management to ensure system-level performance
- Technical leadership of a team of GNC engineers in support of a program, including decomposition and delegation of tasks
Security Clearance and Export Control Requirements:
This position requires the ability to obtain a U.S. Security Clearance. for which the US Government requires U.S. Citizenship. A final U.S. Top Secret security clearance is required post start.
Basic Qualifications (Required Skills / Experience):
- Bachelor's degree in engineering or a related technical discipline and 5+ years of industry experience
- Strong GNC fundamentals and spacecraft system level knowledge
- Ability to perform complex GNC system analyses of kinematics, dynamics, and control systems using existing and/or self-developed tools
- Ability to decompose large/complex/nebulous tasks into clearly defined subsets of work that can be done personally or delegated to other members of the team
- Ability to lead a small team of GNC engineers and collaborate with other subsystem engineers and program leadership
- Ability to support activities (e.g. integration and test, mission operations) during off-nominal hours when required
- This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship.
Preferred Qualifications (Desired Skills/Experience):
- 10+ years industry experience with spacecraft GNC system design
- Satellite I&T and on-orbit operations experience
- Strong fundamentals of project management, including monitoring cost and schedule performance
- Ability to set direction of program work and create processes and standards to support the group
- Advanced understanding of classical and modern control theory, system-level trade studies, architecture development, and systems integration & analysis
- Active TS/SCI clearance
- History of working independently to root cause discrepancies during spacecraft integration and test
Conflict of Interest:
Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process
Drug Free Workplace:
Millennium Space Systems, a Boeing Company, is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Total Rewards:
At Millennium Space Systems, a Boeing Company, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
Millennium Space Systems also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations
Summary Pay Range:
- Level 4: $135,150 - $198,750
Millennium is DDTC-registered, ITAR-compliant Company. This position is located at a facility that requires special access. Applicants MUST be U.S. citizens and eligible for a security clearance. Additionally, applicants must be willing to apply for and maintain a security clearance. We encourage all interested candidates to apply for any open position for which they feel they are qualified.
Applications for this position will be accepted until Mar. 31, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Relocation
Relocation assistance is not a negotiable benefit for this position.
Security Clearance
This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Top Secret/SCI Clearance Post-Start is required.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Millennium Space Systems, a part of Boeing Defense, Space and Security (BDS), is a fast, agile small satellite company focused on national security space. Our missions have direct impact to global security, like missile warning and Earth observation.
Our team is curious, bold and innovative. We take risks, innovate and explore new techniques and technologies. We influence change because we challenge the status quo. And when we watch our satellites launch, we know each one of us made it happen.
Job Summary
As a Mission Operations Engineer, you will be the lead technical authority for Millennium's on-orbit spacecraft. Your work will encompass the entire spacecraft mission life cycle, from the proposal phase to spacecraft and mission design, through space vehicle integration and test, and culminating with launch and on-orbit operations. You will be responsible for all facets of the mission design, including definition of operational concepts, development of on-orbit procedures, and innovation of advanced methods of spacecraft operation unique to each space mission. Mission Operations requires composure in high-pressure situations, in-depth knowledge of both the space vehicles and ground segment, and an ability to respond to anomalous scenarios in real-time. You will be directly responsible for Millennium's critical on-orbit assets.
This position's internal job code is Systems Engineer. Our team is currently hiring for levels 3-4.
Responsibilities
- Lead a team of spacecraft and subsystem engineers during launch and early orbit activities to commission the space vehicle(s) for service
- Perform duties of lead technical authority during mission operations for both the space and ground segments
- Support every aspect of the mission lifecycle, from proposal/mission modeling, design, integration and test, space vehicle shipment, launch and on-orbit operations, to decommissioning
- Define ground and mission operations requirements, and flow mission requirements back to the space vehicle team
- Define mission concept of operation and design reference missions
- Improve future vehicle designs by cataloguing lessons learned from on-orbit exercises
- Support the ground segment design, including command and control, mission planning, mission data processing, and the associated infrastructure to support all activities
- Implement and test space vehicle fault and autonomy, including fault detection and response, autonomous space vehicle behavior, and on-board command and control
- Develop and implement methods of operational automation, to reduce day-to-day operator responsibilities
- Create and execute space vehicle simulator tests to validate mission/fault/autonomy design
- Create and execute in-factory flight vehicle tests to validate mission design compatibility with flight hardware
- Conduct critical ground segment testing, including radio-frequency compatibility testing, remote ground facility interface testing, and acceptance testing of critical ground assets/locations
- Forms and leads anomaly response team when off-nominal vehicle conditions arise
- Contribute to customer briefings/debriefings for orbital events
- Design and validate the mission "sequence of events" for bus commissioning, payload checkout/calibration, and mission operations
- Contribute to Mission Rehearsal events to train the mission team and to validate the mission design
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship. A Final U.S. secret clearance Prestart is required OR An interim and/or final U.S. secret clearance Post Start is required
Minimum Qualifications
- B.S. in Aerospace, Electrical, Software, Computer, Mechanical Engineering, or related field
- Minimum of 3 years of experience in Mission Operations or similar
- Experience with real-time satellite command and control
- Working knowledge of satellite subsystems, ground systems, space missions, and CONOPS design
- Experience delivering operational products to customer environments
- Willingness to support occasional off-nominal working hours during critical 24/7 mission operations activities
- Experience in leading multidisciplinary technical teams, especially to resolve anomalous scenarios
- Active TS clearance and SCI eligibility
Preferred Qualifications
- M.S. in Aerospace, Electrical, Software, Computer, Mechanical Engineering, or related field
- Minimum of 3 years of experience in Mission Operations or similar
- Deep knowledge of satellite systems engineering, including all satellite subsystems
- Guidance, Navigation, and Control; Electrical Power; Thermal Control; Telemetry, Tracking, and Command; Propulsion; etc.
- Experience with Spacecraft Command & Control software systems
- Familiarity with software and scripting tools such as MATLAB, Python, C/C++, Java, etc.
Conflict of Interest:
Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process
Drug Free Workplace:
Millennium Space Systems, a Boeing Company, is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Shift:
- This role will be on 1st shift
Total Rewards:
At Millennium Space Systems, a Boeing Company, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
Millennium Space Systems also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range:
Level 3: $99,000 - 177,000
Level 4: $121,000 - $215,000
Millennium is DDTC-registered, ITAR-compliant Company. This position is located at a facility that requires special access. Applicants MUST be U.S. citizens and eligible for a security clearance. Additionally, applicants must be willing to apply for and maintain a security clearance. We
Applications for this position will be accepted until Apr. 03, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Education
Bachelor's Degree or Equivalent Required
Relocation
Relocation assistance is not a negotiable benefit for this position.
Security Clearance
This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim U.S. Top Secret/SCI Clearance Pre-Start and final U.S. Top Secret/SCI Clearance Post-Start is required.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description At Boeing, we innovate and collaborate to make the world a better place.
We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Millennium Space Systems, a part of Boeing Defense, Space and Security (BDS), is a fast, agile small satellite company focused on national security space.
Our missions have direct impact to global security, like missile warning and Earth observation.
Our team is curious, bold and innovative.
We take risks, innovate and explore new techniques and technologies.
We influence change because we challenge the status quo.
And when we watch our satellites launch, we know each one of us made it happen.
As a Principal Test Engineer, you will develop manufacturing processes to test satellite avionics while dually implementing test procedures for dynamic and thermal environmental testing of components, subsystems, and satellite products.
You will be responsible for providing guidance on investigation of complex test anomalies, leveraging design for testability and continuous improvement to deliver space-grade avionics at a high rate and low cost without compromising personnel safety or product reliability.
A successful candidate for this role will demonstrate integrity, intellectual curiosity, empathy, technical capability, and a strong motivation to scale and support manufacturing test.
This position's internal job code is Test & Evaluation Engineer.
Our team is currently hiring for a level 5 and level 6.
Position Responsibilities: Architect spacecraft hardware test procedures and test readiness frameworks; serve as the senior escalation point for complex issues that arise during qualification and acceptance test campaigns Lead cross-functional initiatives to identify systemic improvement opportunities that enhance safety, product quality, cycle time, and labor efficiency across environmental test operations Serve as the organization's senior technical authority for root cause analysis of environmental test anomalies, driving systemic corrective actions and preventative measures across programs Champion production autonomy by challenging requirements at the organizational level, driving process simplification across product lines, and sponsoring automation initiatives that reduce human error and manual intervention Serve as the principal subject matter expert and technical authority for environmental test processes and equipment, representing the organization in design reviews, customer engagements, and industry forums Influence product design teams to incorporate design-for-test principles early in the development lifecycle, reducing downstream test complexity and cost Basic Qualifications (Required Skills/Experience): Bachelor's degree in an engineering discipline Minimum of 10 years in a hardware test environment Demonstrated experience leading, mentoring, or technically guiding teams of engineers Extensive hands-on experience with thermal chambers, TVAC chambers, and/or vibration shakers Proven track record of authoring test procedures, driving process improvements, and managing non-conformances at scale Strong technical writing, verbal communication, and cross-functional stakeholder management skills This position requires the ability to obtain a U.S.
Security Clearance for which the U.S.
Government requires U.S.
Citizenship.
An interim and/or final U.S.
Security Clearance Post-Start is required Preferred Qualifications (Desired Skills/Experience): Master's degree in an engineering discipline Minimum of 12 years of experience in environmental testing, with deep expertise in vibration, thermal ambient, and thermal vacuum testing Expert-level knowledge of SMC-S-016, MIL-STD-1540, GSFC-STD-7000A, or similar environmental testing standards, including the ability to interpret, tailor, and negotiate requirements with customers Proven experience scaling environmental test operations in a high-throughput manufacturing environment from development to full-rate production Expert-level understanding of root cause analysis and related analytical methodology (Five Whys, Fishbone/Ishikawa Analysis, 8D, FMEA, etc.) Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process Drug Free Workplace: Millennium Space Systems, a Boeing Company, is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Total Rewards: At Millennium Space Systems, a Boeing Company, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
Millennium Space Systems also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: Level 5: $137,000
- $244,00 Level 6: $167,000
- $298,000 Millennium is DDTC-registered, ITAR-compliant Company.
This position is located at a facility that requires special access.
Applicants MUST be U.S.
citizens and eligible for a security clearance.
Additionally, applicants must be willing to apply for and maintain a security clearance.
We encourage all interested candidates to apply for any open position for which they feel they are qualified.
Applications for this position will be accepted until May.
30, 2026 Export Control Requirements: This position must meet U.S.
export control compliance requirements.
To meet U.S.
export control compliance requirements, a "U.S.
Person" as defined by 22 C.F.R.
§120.62 is required.
"U.S.
Person" includes U.S.
Citizen, U.S.
National, lawful permanent resident, refugee, or asylee.
Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation Relocation assistance is not a negotiable benefit for this position.
Security Clearance This position requires the ability to obtain a U.S.
Security Clearance for which the U.S.
Government requires U.S.
Citizenship.
An interim and/or final U.S.
Top Secret/SCI Clearance Post-Start is required.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.aa415a4b-8b21-40fc-a65c-70d2b25ca29a
Job Description At Boeing, we innovate and collaborate to make the world a better place.
We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Millennium Space Systems, a part of Boeing Defense, Space and Security (BDS), is a fast, agile small satellite company focused on national security space.
Our missions have direct impact to global security, like missile warning and Earth observation.
Our team is curious, bold and innovative.
We take risks, innovate and explore new techniques and technologies.
We influence change because we challenge the status quo.
And when we watch our satellites launch, we know each one of us made it happen.
Job Summary Autonomy Engineering is focused on design, analysis, and development of mission Concepts of Operations (CONOPS) from customer use cases and requirements, and enabling mission success through comprehensive on-board fault management and autonomy.
Engineers in the group are integral throughout the entire program lifecycle.
They are key stakeholders in the design and validation of mission CONOPS and Design Reference Missions (DRM), and are leaders in comprehensive end-to-end software integration, validation, and testing.
They define the underlying architecture for fault detection, isolation, and response (FDIR), and own the development and validation of satellite/constellation specific fault configuration(s).
They are the chief architects and implementers of satellite/constellation autonomy, ensuring mission level objectives are met and spacecraft health and safety are always maintained.
As an Autonomy Engineer on the Autonomy Team, you will be the Responsible Engineering Authority (REA) for all Autonomy for a program, study, or proposal.
You will define fault & autonomy requirements; define states, modes, and transitions; define and develop the fault & autonomy architecture for satellites/constellations, including fault-tolerance and redundancy requirements; define and analyze thresholds and persistence of on-board fault tests; design fault responses to ensure containment of failed hardware and health and safety of on-orbit satellites; provide tools and procedures for use during on-orbit mission operations; and support on-console mission operations for on-orbit spacecraft as a mission specialist.
In addition to execution of technical design, analysis, and operation, you may be responsible for project management activities to support programs, ensuring that high-quality work products are delivered on-time.
This position's internal job code is Systems Engineer.
Our team is currently hiring for Levels 3.
Position Responsibilities: Perform fault and autonomy requirements definition, verification, and validation Define satellite/constellation states, modes, transitions, and other autonomous spacecraft behaviors Contribute to architecture concepts, CONOPS, and technology trade-off analyses Design and validate onboard fault detection, isolation, and responses and perform end-to-end validation of autonomy products and behaviors Support on-console operations for on-orbit missions Other duties as assigned This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
Security Clearance and Export Control Requirements This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R.
§ 120.15 is required.
"US Person" includes US Citizen, lawful permanent resident, refugee, or asylee.
Basic Qualifications (Required Skills/Experience): 2 years experience in satellite design and/or operation Familiarity with common analysis tools such as MATLAB/Simulink, Python, STK, etc.
Exceptional critical thinking skills and an ability to notice and debug problems with minimal guidance Ability to anticipate effects and interactions for varying cases across a complex system Strong attention to detail while maintaining big-picture perspective This position requires the ability to obtain a U.S.
Security Clearance for which the U.S.
Government requires U.S.
Citizenship.
Preferred Qualifications (Desired Skills/Experience): 5 years experience in satellite design and/or operation Experience with fault management strategies/architectures for safety of mission critical systems Experience with autonomous system design and analysis Ability to plan and execute integrated system fault management and autonomy V&V (validation and verification) Experience with satellite end-to-end testing Possess active TS/SCI clearance Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process Drug Free Workplace: Millennium Space Systems, a Boeing Company, is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Shift: This role will be on 1st Shift Total Rewards: At Millennium Space Systems, a Boeing Company, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
Millennium Space Systems also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary Pay Range: Level 3: $104,550
- $153,750 Millennium is DDTC-registered, ITAR-compliant Company.
This position is located at a facility that requires special access.
Applicants MUST be U.S.
citizens and eligible for a security clearance.
Additionally, applicants must be willing to apply for and maintain a security clearance.
We encourage all interested candidates to apply for any open position for which they feel they are qualified.
Applications for this position will be accepted until Mar.
26, 2026 Export Control Requirements: This position must meet U.S.
export control compliance requirements.
To meet U.S.
export control compliance requirements, a "U.S.
Person" as defined by 22 C.F.R.
§120.62 is required.
"U.S.
Person" includes U.S.
Citizen, U.S.
National, lawful permanent resident, refugee, or asylee.
Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.aa415a4b-8b21-40fc-a65c-70d2b25ca29a
