Engineering Structures Jobs in Hartford
124 positions found — Page 5
Job Title : Aviation Electronics, Electrical & Computer Systems Technician (AE/AT) Category / Component : Enlisted • Active Overview Aviation Electronics, Electrical and Computer Systems Technicians keep Navy aircraft mission ready by maintaining, troubleshooting, and repairing the electrical power, avionics, and computer based systems that enable radar, communications, navigation, flight controls, and weapons at sea and ashore.
Qualified Sailors may also volunteer as Naval Aircrewmen and perform in flight systems operations and mission support.
Key Responsibilities Troubleshoot and repair complex aircraft systems including digital computers, fiber optics, radar, laser electronics, infrared detection, and communications and navigation suites; maintain aircraft electrical power generation and distribution systems; test and calibrate aircraft instruments and automatic flight controls; perform micro miniature circuit card repair for qualified technicians; install modifications and upgrades to aircraft avionics and electrical systems; use diagnostic equipment and interpret schematics and wiring diagrams to restore systems to full mission capability.
What to Expect A mix of hands on flight line maintenance and bench diagnostics in hangars, avionics shops, and aboard aircraft carriers; frequent troubleshooting under time pressure to return aircraft to service; work around high tempo flight operations with rotating shifts, nights, and weekends while deployed; strict adherence to safety, tool control, foreign object damage prevention, tag out procedures, and quality assurance standards; opportunities to qualify as a work center leader or collateral duty inspector as you gain experience.
Work Environment Assignments with squadrons at naval air stations and aboard aircraft carriers worldwide; work in hangars, avionics labs, and outdoors on flight lines in all weather conditions and high noise environments; close teamwork with other aviation ratings and aircrew in a structured maintenance organization; potential temporary duty with detachments and deployments supporting carrier or expeditionary operations.
Pathways, Training & Advancement Recruit Training followed by Class A School in Pensacola, Florida, covering aviation theory, electrical systems, electronics fundamentals, and technical skills; assignment after A School into either the Aviation Electrician's Mate or Aviation Electronics Technician rating based on performance and Navy needs; advanced platform specific schools for particular aircraft and mission systems; opportunities to qualify for micro miniature repair and, for volunteers who qualify, to attend Naval Aircrew training.
Enlist for the Aviation Electronics and Electrical pipeline, with final placement into AE or AT after A School based on performance and service needs; qualified Sailors may later volunteer for Naval Aircrew duty after initial rating qualification and screening.
Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.
Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.
Additional qualifications for this job may include: United States citizenship and eligibility for a security clearance; normal color perception; interest in aviation and working around aircraft; strong aptitude in electronics, computers, and precision technical work; manual dexterity, good memory, and physical fitness sufficient to work safely on flight lines, in hangars, and on shipboard aircraft.
Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.
Specific options depend on the Sailor's status, training, and current Navy policy.
Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.
Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.
Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.
Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.
Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.
It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.
Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.
Investment Accounting Manager
Financial Controllership Team
Full time
Boston, MA or Springfield, MA
This is an individual contributor role
The Opportunity
This Investment Accounting Manager role will be a key addition to our Investment Controllership team. The position reports to the Director of Partnerships and resides within the Financial Controllership team, a critical team within the Controllers Organization which aspires to be best in class financial stewards for MassMutual. This is an opportunity for an individual who thrives in a highly dynamic and agile accounting environment to collaborate across teams focused on solid execution and improving outcomes. We are seeking an accounting professional who wants to join a highly motivated team of professionals focused on proactively driving the development and execution of process improvements, meaningful analysis and improved coordination with the business partners for Investment activities.
The Team
As a member of the Financial Controllership Team, the incumbent will be involved in shaping the future of the organization, supporting both the on-going growth and analysis within the Investment Controllership team and other key initiatives.
The Impact:
- Creates an environment whereby the team is inspired, engaged and motivated by identifying opportunities to learn and grow.
- Manages priorities effectively and adapt quickly to achieve goals while developing efficiencies and established methods in the process.
- Thrives in a complex corporate structure and comfortably switch gears and alter course to adapt to changing circumstances.
- Plays a key role in leading a collaborative and inclusive culture by working closely with Investment Management.
- Actively participate in the implementation of the Company’s new ledger.
- Responsible for ongoing activities as part of the monthly, quarterly and annual close cycles
- Uses professional insight to identify and implement accounting improvements that increase the business value and efficiency of the team.
- Leads internal control efforts.
- Initiates and/or leads increasingly complex continuous improvement activities.
- Participating in problem solving to improve quality, cycle times, increase efficiencies, improve employee engagement and customer satisfaction within the Investment Controllership team.
- Makes recommendations to continuously improve the overall control environment of the Investment Controllership team.
The Minimum Qualifications
- Bachelor’s degree
- 6+ years of financial reporting experience with a track record of increasing responsibility
- 4+ years of financial reporting experience on Alternative Investments
The Ideal Qualifications
- 8+ years of financial reporting experience with a track record of increasing Responsibility
- CPA preferred
- Master’s degree or beyond
- Strong analytical skills: ability to analyze financial data sets and tell the story of the data
- Proven ability to complete high quality work efficiently and increase autonomy over time
- Experience analyzing new investments and accounting guidance to drive appropriate and preferred investment accounting and reporting across the Company and subsidiaries
- Experience with system implementations preferred
- Able to build and maintain strong working relationships across cross-functional groups
- Excellent verbal and written communication skills with the ability to express ideas in and articulate in an organized and persuasive manner to leadership, staff, regulatory bodies, etc.
- Able to work well in a dynamic and agile environment while leading the team in execution of various priorities and related deliverables
- Intellectual curiosity to continue learning and adding breadth and depth to understanding
What to Expect as Part of MassMutual and the Team
- Regular meetings with the Investment Controllership team
- Focused one-on-one meetings with your manager
- Networking opportunities including access to Asian, Hispanic/Latinx, African American, women, LGBTQIA+, veteran and disability-focused Business Resource Groups
- Access to learning content on Degreed and other informational platforms
- Your ethics and integrity will be valued by a company with a strong and stable ethical business with industry leading pay and benefits
#LI-CR37
MassMutual is an equal employment opportunity employer. We welcome all persons to apply.If you need an accommodation to complete the application process, please contact us and share the specifics of the assistance you need.
California residents: For detailed information about your rights under the California Consumer Privacy Act (CCPA), please visit our California Consumer Privacy Act Disclosures page.
- Job Reference Id: ORD- -MD-CT
- Title: MD
- Dates Needed: July - November 2026
- Shift Type: Day Shift
- Assignment Type: Outpatient; Clinic
- Call Required: No
- Board Certification Required: Negotiable
- Job Duration: Locums
About the Facility
This pediatric clinic specializes in providing comprehensive outpatient care for children and young adults up to age 21. The facility maintains a structured environment with dedicated support staff to ensure efficient patient flow and quality care delivery. The clinic operates during standard business hours with no call requirements for the locum tenens position.
About the Facility Location
Connecticut offers diverse attractions and recreational opportunities throughout the region. Notable destinations include Foxwoods Resort Casino, Mohegan Sun Casino with its arena, and the prestigious Yale University. The area features maritime heritage sites such as Mystic Seaport Museum and Mystic Aquarium and Institute for Exploration, along with recreational venues like Ocean Beach Park and various touring options including sightseeing excursions and historic site visits.
About the Clinician's Workday
The clinician will provide comprehensive pediatric care to patients aged 0-21 years in an outpatient clinic setting, working Monday through Friday from 8:00 AM to 5:00 PM. The position requires managing an average caseload of 22-24 patients per day while maintaining high-quality care standards. Board certification or board eligibility in pediatrics is required, along with a valid Connecticut medical license. The ideal candidate should possess extensive pediatric experience and demonstrate proficiency in providing care across all pediatric age groups.
Additional Job Details
- Case Load/PPD: 22-24
- Support Staff: MA per provider, 3-4 PSR, 3 LPNs
- Patient Population: Children
- Location Type: On-Site
- Prescriptive Authority Required: Yes
- Government: No
Why choose ?
Our services are 100% free for clinicians and are designed for a seamless experience with every assignment:
- Precision job matching with proprietary algorithm
- Rapid credentialing with Axuall Digital Wallet
- Concierge support with a dedicated clinician deployment specialist
- Digital hub for assignment details
WE ARE SEEKING AN EXPERIENCED CORPORATE / M&A ATTORNEY. LICENSURE IN CT, MA or NY.
THE BUSINESS
Marti Law Group is a boutique law firm hyper focused on healthcare transactions (primarily M&A). With a realization of the need for the practice of law to evolve, Marti Law Group offers a disruptive model, offering predictable flat fees. We are entrepreneurs and business advisors first and attorneys second. Unlike most lawyers who consider only legal elements, we evaluate the practical side of a business and advise our clients accordingly.
We live by a set of core values:
- Reimagine What’s Possible: We challenge outdated ways of practicing law.
- Every Day We’re Hustlin’: We move fast, think fast, and act fast.
- Ride or Die: We show up for our clients, our team, and our mission. No one rides alone.
- Be the Guide: We lead clients toward their vision with confidence.
- Make Order Out of Chaos: We bring clarity to complexity and regulatory confusion.
To be considered, candidates must align with these values and thrive in a fast-paced, feedback-driven environment.
THE ROLE
You will help healthcare providers in structuring, purchasing, scaling, or selling their practices. Extensive drafting and negotiation experience is required, as you will be responsible for various agreements including, but not limited to: Asset/Stock/Goodwill Purchase Agreements, Employment/Contractor Agreements, Equity Agreements, Commercial Leases, Management Services Agreements and other ancillary documents pertinent to the M&A process. You will also be responsible for corporate formations across various jurisdictions.
Experience working with Management Services Organizations (MSOs) and/or Dental Services Organizations (DSOs), along with experience drafting Management Services Agreements (MSAs) is strongly preferred.
THE PERSON
The ideal candidate is someone who shares our vision and wants to be part of something special for the long-term. Must be energetic, maintain high positive energy and move swiftly without constant supervision. It is also critical to be an excellent communicator, not afraid to speak up and one to take initiative. Must display excellence in drafting, organization, and attention to detail. Our expectation is that calls/questions/emails/etc. will be responded to in less than 24 hours. Clients value the speed with which we work, while still delivering superior work product.
SKILLS:
- Must be able to move fast and put in the extra work (this is not a 9-5)
- Our expectation is that calls/emails are responded to within 24 hours maximum
- Strong written and verbal communication
- Outgoing and comfortable speaking to a group
- Exceptional organizational and project management abilities
- Concerned about doing things the right way
- Calm under pressure
- Service-based attitude
- Proven ability to succeed
- A thirst to continue to learn and grow
EXPERIENCE:
- 4+ years MINIMUM of experience conducting business, corporate and/or M&A transactions.
- Experience working with Management Services Organizations (MSOs) and/or Dental Services Organizations (DSOs), along with experience drafting Management Services Agreements (MSAs) is strongly preferred.
COMPENSATION: Commensurate with experience.
- Bonuses
- Benefits (Health, 401K, 401K match)
- Hybrid
Kelly is currently seeking an experienced Powder Coat Specialist for a Direct Hire opportunity in Farmington, CT! The Powder Coat Specialist will perform all painting-related processes to make sure that all parts are delivered in time and zero defect.
Powder Coat Specialist Responsibilities
- Load parts onto conveyor line and ensure proper preparation for paint/powder coating (tape, plug, bond, etc.).
- Ensure parts are clean and dry before entering the paint/powder coat spray booth.
- Unload parts from the conveyor line and ensure 100% quality of all parts.
- Ensure that all parts are delivered in a manner that prevents damage or defects and with proper paperwork.
- Follow and adhere to the rework policies when handling defective parts from final customer or internal production.
- Must be able to effectively use area tools and equipment, such as forklifts, drill press, power drills, air tools, hand grinders/orbital tools, pressure washers, etc.
- Deburr, grind and clean sheet metal parts that require touch-up or rework.
- Ability to make necessary adjustments to cleaning solutions of parts wash line.
- Assist in paint color changeovers at the spray booths.
- Perform routine checks following the standard processes in the powder coat area.
- Read and understand blueprints and written specifications (also in metric system).
- Must have ability to stand for extended periods of time, bend and lift up to 70 lbs.
- Support and perform 5S and preventive maintenance activities to maintain area equipment and environment.
- Support Shop Floor Management in the area. Improving all related processes.
Experience/Education
- Previous experience in an industrial/ manufacturing environment and/or powder coating area is preferred.
- Knowledge in metal preparation and powder painting strongly preferred.
- Must be able to work in a fast-paced environment.
- Knowledge of MS Office products, quality and lean manufacturing techniques is a plus.
- Two-year technical degree or the suitable combination of education and work experience.
Salary: $100,000
- $150,000 per year A bit about us: We are a 70+ years strong leader in the Property Insurance Intelligence Industry.
Our purpose is to provide actionable intelligence for tough questions about property and property contents.
From our testing labs to fire investigation, we are constantly creating solutions to industry challenges.
Come join our team and be a part of the solution! Our work is guided by our core values: We do what we say we will do.
We respect and care for all.
We are focused on innovation.
We make hard things easy.
We are driven to achieve.
We are better together.
Why join us? AMAZING Company Culture! REMOTE 401K Match Excellent Benefits Start Day 1 of Employment Competitive Salary Plus Compensatory Paid Time
- an extra average of 25K Annual Bonus Training Provided Career Growth Job Details We are currently looking for a Remote Civil Engineer to provide actionable intelligence for tough questions about property and property contents.
From our testing labs to fire investigation, we are constantly creating solutions to industry challenges.
Come join our team and be a part of the solution! Responsibilities: Conduct Site Studies evaluating damages to building materials or components for Residential and Commercial Structures, including but not limited to roof systems, foundations, water intrusion, cladding elements, construction defects, and complete structural systems.
Write Technical Reports that provide detailed and accurate findings and conclusions related to a completed site investigation.
Provide excellent customer service to company internal and external customers.
On occasion, provide expert testimony or depositions as needed on projects to which you have been assigned.
**Our company has a dedicated Litigation Department to provide support to all project managers.
Proactively pursue additional training, mentoring opportunities, licenses, education, and/or certifications (cost covered by Company).
Travel may be required for assigned work outside of your home-region.
Daily and overnight in-region travel is also required for facilitating investigations.
Education/Requirements: BS Degree in Civil or Structural Engineering or related engineering disciplines (Mechanical, Electrical, etc…) Registered as an active Professional Engineer (P.E.) in the State of Connecticut.
Have an active NCEES record (Or be eligible to obtain within 90 days of employment).
2-3 of experience in failure analysis, forensic or structural inspection, knowledge of residential and/or commercial construction, building codes, design, or related experience is highly preferred.
Required to have a valid driver’s license, with an acceptable driving record.
Required to have strong technical writing abilities with experience using Microsoft Word.
Proficient with Microsoft Office (Excel, Outlook, PowerPoint, etc….).
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Remote working/work at home options are available for this role.
Salary: $105,000
- $130,000 per year A bit about us: Founded nearly a century ago and based in South Windsor, Connecticut, we design and manufacture highly engineered products for demanding aerospace and defense applications, with a strong reputation for precision, reliability, and technical excellence.
We work cross-functionally across finance, engineering, sales, and production to deliver accurate pricing, protect margins, and support long-term growth in a regulated manufacturing environment.
Why join us? Competitive Compensation: Market-aligned base salary (DOE) Stable Aerospace & Defense Business: Long-term programs and repeat customers Cross-Functional Exposure: Work closely with finance, engineering, sales, and operations Impactful Role: Direct influence on pricing strategy, margins, and new business wins Structured Schedule: Monday–Thursday 7:30am–5:00pm; every other Friday 7:30am–4:00pm Onsite Collaboration: High visibility within a tight-knit manufacturing team Job Details Key Responsibilities and Duties Develop accurate cost estimates for RFQs, proposals, price lists, strategic opportunities, and business cases Create and execute estimating plans, identifying methodologies, required data, and associated risks Perform detailed cost analyses across material, labor, overhead, and indirect costs Build and maintain standardized product costing templates Analyze material costs including inventory availability, escalation, CPI/PPI, exchange rates, and freight Understand and model direct labor and overhead rates by department and location Support pricing strategies to maximize gross margin and profitability Review monthly cost variances and recommend pricing or standard cost updates Investigate job order variances and update item masters as needed Review blueprints and specifications to determine material and process requirements Support BOM setup and cost control within the MRP/ERP system Solicit and review subcontractor and vendor quotes, including government solicitations Collaborate cross-functionally to meet departmental and company goals Maintain compliance with safety requirements when accessing the shop floor Qualifications – Needed Bachelor’s degree preferred Minimum 5+ years of cost estimating or pricing experience Minimum 5+ years in a manufacturing environment, preferably a job shop Experience with government or defense-related contracts and solicitations Strong mechanical aptitude and understanding of manufacturing processes and tooling risks Ability to read and interpret blueprints and job specifications Proficiency in math, cost analysis, and financial modeling Experience with ERP systems (Visual, Epicor, SAP); strong Excel skills required Exceptional attention to detail and ability to manage multiple priorities Confident communicator with the ability to push back when jobs are not cost-effective U.S.
Person status required under export control regulations Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
- 5pm Job Description Summary As a member of the Process and Controls Engineering Team, support the Clean Combustion Parts and Services business.
Responsible for developing tenders, performing detailed studies, and leading contract execution.
Work cross-functionally to develop process solutions based on customer needs, solving complex problems across the Clean Combustion product line of utility and industrial boilers.
Main functions include thermal sizing and process assessment of sub- and supercritical 2-Pass boilers.
Collaborate as a team player and occasionally as a task leader, acting with humility, transparency, focus, and inclusion.
Analytically minded, decisive, and collaborative.
Roles and Responsibilities Support the Clean Combustion Services’ boiler market for various customer requests including pressure part material and equipment upgrades, comprehensive power plant assessments, fuel conversions, emission reductions, and heat rate improvements.
Perform combustion/process computation for furnace combustor and associated component performance, including heat transfer surface configurations and selection of pressure part arrangement and materials.
Develop steam generator performance guarantees and support commissioning and performance testing activities.
Develop material lists and engineering selections to meet customer requirements and provide required deliverables, collaborating and supporting the Project team.
Utilize in-depth knowledge of a technical discipline, analytical thinking, and technical experience to execute business strategy.
Participate as a presenter or reviewer in technical and program reviews, assuring proper documentation of technical data.
Use judgment to propose different solutions outside of set parameters to address more complicated manufacturing processes with technical variety and/or interdependent production cycles.
Act as a resource for colleagues with less experience and may lead small projects with low risks and resource requirements.
Domestic travel to visit customer sites, less than 5%.
Required Qualifications Bachelor's degree from an accredited university or college in Mechanical Engineering, Chemical Engineering, or other engineering discipline with a minimum of 6 years of relevant work experience.
Desired Characteristics Strong oral and written communication skills.
Demonstrated ability to analyze and resolve problems.
Ability to document, plan, market, and execute programs.
Established project management skills.
Respectful, receptive, agile, and eager to learn.
- 5pm Job Description Summary: Active contributor to support the Clean Combustion Parts and Services business.
Develop tenders and lead contract execution.
Work cross-functionally to develop controls solutions based on customer needs.
Solve complex problems across the Clean Combustion product line of utility and industrial boilers.
Work as a team player and at times as a task leader.
Act with humility, transparency, focus, and inclusion.
Analytically minded, decisive, and collaborative.
Roles and Responsibilities: Identify, develop, evaluate, introduce, and manage engineering solutions for product control and control system technology needs.
Apply control theory and mathematical modeling to design and control systems with desired behaviors.
Work autonomously on complex tasks.
Develop complete hour estimate, schedule, and material lists for cost estimating.
Utilize in-depth knowledge of a technical discipline and analytical thinking to execute business strategy.
Understand National Fire Protection Association (NFPA) Codes, Burner Management Systems, and Distributed Control Systems.
Participate as a presenter or reviewer in technical and program reviews.
Assure proper documentation of technical data generated for assigned projects and tasks.
Use judgment to propose different solutions for complicated manufacturing processes.
Act as a resource for colleagues with less experience.
May lead small projects with low risks and resource requirements.
Domestic travel to visit customer sites, less than 5%.
Required Qualifications: Bachelor's degree from an accredited university or college in Electrical Engineering or other engineering discipline.
Minimum 6 years of relevant work experience.
Desired Characteristics: Strong oral and written communication skills.
Demonstrated ability to analyze and resolve problems.
Ability to document, plan, market, and execute programs.
Established project management skills.
Respectful, receptive, agile, eager to learn.
Software Build Engineer - Core Data Platform Team, EISFull-Time, Hybrid (Boston or Springfield)
The Opportunity
You will join the Core Data Platform team, which builds and maintains a suite of tools powering over 2,100 data pipelines in production across MassMutual. As a Software Build Engineer, you'll manage the cloud infrastructure that supports this platform in a fast-paced, innovative, and collaborative environment. You'll recommend and evaluate new technologies, contribute to code and patterns, and play a key role in shaping the future of data engineering at MassMutual.
The Team
You'll be a key part of our esteemed Core Data Platform team, focused on enabling and accelerating the delivery of new data pipelines and products. You'll help support a thriving user community of over 12 data engineering teams, located both on-shore and off-shore. Our team is technical, highly motivated, and excels at working in a fast-paced and always evolving environment with agility and resilience. We regularly collaborate to establish enterprise strategy, working closely with architecture, governance, and enterprise infrastructure teams.
The Impact
- Design, develop, and improve build and deployment standards and processes (e.g., CI/CD, orchestration, scheduling) to accelerate delivery and ensure reliability of data pipelines.
- Develop and maintain core infrastructure to deliver scalable, robust, and highly available systems, directly supporting 12+ data engineering teams.
- Evaluate and recommend emergent technologies, tools, processes, and reference architectures, driving innovation and continuous improvement.
- Contribute to the design and development of new software components, enhancing platform capabilities.
- Define version control best practices and automate enforcement where appropriate.
- Improve monitoring and logging using technologies such as OpenTelemetry and New Relic, enhancing system observability and reducing downtime.
- Identify areas for process improvement and automation, increasing efficiency and reducing manual effort.
- Collaborate closely with Enterprise Infrastructure, Architecture, and Governance teams, providing mentorship to developers as appropriate.
- Work in an Agile development environment, attending daily stand-up meetings and delivering incremental improvements.
Minimum Qualifications
- Bachelor's degree in computer science, engineering, or a related technical field.
- Cloud: 5+ years of experience working in a cloud environment (e.g., AWS) using infrastructure-as-code technologies such as Terraform or CloudFormation to provision infrastructure.
Ideal Qualifications
- Master's degree in computer science, engineering, or a related field.
- Code: 2+ years of experience as a Python or Java developer.
- Build & Deployment: Excellent understanding of build and continuous integration and deployment tools (e.g., Github Actions, Artifactory).
- Communication: Excellent communication, problem-solving, organizational, and analytical skills.
- Design: Strong foundation in algorithms, design patterns, and writing efficient code.
- Workflow: Knowledge of orchestration and scheduling tools (e.g., Apache Airflow).
- Data: Understanding of data processing technologies such as Apache Spark and Apache Kafka.
- Autonomy: Able to work independently and provide leadership to small teams of developers.
What to Expect as Part of MassMutual and the Team
- Regular collaboration with Enterprise Infrastructure, Architecture, Governance and Data Engineering teams
- Focused one-on-one time with your manager
- Networking opportunities including access to Asian, Hispanic/Latinx, African American, women, LGBTQIA+, veteran and disability-focused Business Resource Groups
- Access to learning content on Degreed and other informational platforms
- Your ethics and integrity will be valued by a company with a strong and stable ethical business with industry leading pay and benefits
#LI-RK1
MassMutual is an equal employment opportunity employer. We welcome all persons to apply.If you need an accommodation to complete the application process, please contact us and share the specifics of the assistance you need.
Additionally, the MDC provides drinking water to portions of Farmington, Glastonbury, East Granby and South Windsor, known as the MDC's non-member towns .
JOB SUMMARY This is highly responsible professional geographic information systems analysis, digital database analysis and administration work involving the maintenance of software and hardware of a computerized digital database.
Work involves responsibility for effective and efficient maintenance of a geographic information system.
Duties include development and implementation of upgrades to system components, providing support to project engineers and outreach staff, map creation, data creation, data analysis, data management, and database development.
This position also has the responsibility for making difficult geographic information system quality control and assurance decisions.
This work requires that the employee have knowledge, skill and ability in computer platforms, Windows operating systems, or comparable, automated mapping and facilities management software.
SUPERVISION RECEIVED Works under the general supervision of the Director of Information Technology or other appropriate staff.
MINIMUM QUALIFICATIONS A bachelor's degree from a recognized college or university in geography, geographic information systems, or a related field plus two (2) years of progressively responsible experience in geographic information system hardware and software operations and maintenance and at least some experience with a Windows, or comparable, operating system.
SPECIAL REQUIREMENTS Must have a valid driver's license.
KNOWLEDGE, SKILLS, AND ABILITIES Knowledge of geographic information systems and cartographic principles and practices.
Knowledge of Structured Query Language (SQL), system programming, and database administration.
Knowledge of public administration principles and practices as applied to work unit reporting and routing administrative procedures.
Knowledge of cartography, geodesy and photogrammetry as related to digital databases.
Ability in oral and written communications.
Ability to administer policies and procedures including planning, routine decision-making, and report development and writing.
Ability to establish and maintain effective working relationships with coworkers, consultants, vendors, town officials, other utilities, and other governmental agencies.
ADA COMPLIANCE Physical Ability : Tasks require the ability to exert light physical effort in a sedentary to light work environment, which may involve some lifting, carrying, pushing and/or pulling of objects and materials of light weight (under 25 pounds).
Sensory Requirements : Some tasks require the ability to perceive and discriminate visual cues or signals.
Some tasks require the ability to communicate orally and in writing.
Environmental Factors : Essential functions are performed primarily indoors with minimal exposure to outdoor environmental factors.
The Metropolitan District Commission is an Equal Opportunity Employer.
In compliance with the Americans with Disabilities Act, the Commission will provide reasonable accommodations to qualified individuals with disabilities and encourages both prospective and current employees to discuss potential accommodations with the employer.
For more information, or to apply now, you must go to the website below.
Please DO NOT email your resume to us as we only accept applications through our website.
ESSENTIAL FUNCTIONS The following duties are normal for this position.
The omission of specific statements of the duties does not exclude them from the classification if the work is similar, related, or a logical assignment for this classification.
Other duties may be required and assigned.
Develops, collects, implements and maintains the geographic information system data base files and data management procedures.
Develops and implements system maintenance standards.
Monitors system security, cartographic standards, data base protocol and is responsible for data management.
Coordinates the geographic information system support contracts and other vendor contracts, and agreements.
Prepares cost estimates for upgrades, contracts, agreements, and technical reports, as required.
Coordinates implementation and application of computer hardware and software with consultants and vendors.
Assists the Manager of Engineering Technical Services in preparation of the annual budget as it relates to system improvement requirements.
Coordinates the technical needs of other user groups both inside and outside the District and programs and administers the network hardware and software.
Provides technical support to internal staff.
Creates maps showing project extents, extent/progress of projects, and other ad hoc maps as requested.
Performs special assignments, as directed.
Researches and develops new programs to improve system management and efficiency.
Performs related work as required.
Salary: $33
- $38 per hour A bit about us: Founded nearly 80 years ago and based in East Hartford, Connecticut, we are a precision aerospace manufacturer supporting some of the most demanding OEM customers in the world.
With deep roots in advanced machining, quality excellence, and continuous improvement, we partner closely with leading aerospace and defense organizations to deliver mission-critical components that meet the highest performance and certification standards.
Why join us? Competitive Compensation: DOE, aligned to senior-level CNC/CAM expertise 401(k) with Company Match Comprehensive Benefits: Medical, Dental, Vision Paid Company Holidays & PTO Tuition Reimbursement & Ongoing Training (including ESPRIT) Highly Technical Work: Precision & ultra-precision aerospace machining Direct Impact: Bridge engineering and manufacturing in a high-visibility role 100% Onsite: East Hartford, CT manufacturing facility Job Details Key Responsibilities & Duties Develop advanced CNC programs using ESPRIT CAM to optimize precision aerospace manufacturing Generate and optimize G-code for multi-axis lathes and vertical machining centers Collaborate with Engineering and Operations to define tooling, workholding, metrology, and deburring processes Document approved manufacturing methods within ESPRIT tooling and datasheet libraries Leverage parametric programming, macros, and CAM automation across part families Perform hands-on machine setup and support first-run production during process development Optimize toolpaths, material removal rates, surface finishes, and production yields Train production personnel to ensure repeatability and smooth production transitions Manage CNC programs and setup data within PDM and DNC systems Act as a technical SME supporting lean initiatives, cycle time reduction, and quality improvements Research emerging manufacturing technologies and recommend productivity investments Qualifications — Needed Bachelor’s degree in Engineering preferred (or equivalent progressive hands-on experience) Minimum 5+ years of advanced manufacturing experience in precision or ultra-precision environments Expert-level knowledge of Fanuc controls Proven CNC programming experience with CAM software ESPRIT CAM experience preferred (Mastercam, PartMaker, SolidCAM acceptable; training provided) Strong background in tooling systems, workholding, and CNC machine setup Experience with advanced techniques such as on-machine probing and tool setters Familiarity with manufacturing enterprise systems; Epicor ERP experience a plus Ability to bridge engineering intent and shop-floor execution Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
- $140,000 per year depending on Experience / Excellent Benefits and Room for Growth This Jobot Job is hosted by: Ken McClure Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $110,000
- $140,000 per year A bit about us: A growing precision manufacturing organization is seeking a detail-oriented and proactive Manufacturing Process Engineer to support the development and production of complex, high-tolerance components.
This role focuses on creating and improving manufacturing processes, developing detailed work instructions, and designing tooling to ensure efficient, consistent, and quality-driven production.
Why join us? $110,000
- $140,000 per year depending on Experience Excellent Benefits Room for Growth Job Details Key Responsibilities Develop and optimize manufacturing processes for new and existing components.
Interpret and create engineering drawings and 3D models to support manufacturing planning.
Design and detail tooling and fixtures to support efficient, repeatable, and high-quality operations.
Create and maintain Manufacturing Work Instructions (MWIs) and other technical documentation.
Plan and sequence manufacturing operations with a focus on quality, cost, and throughput.
Collaborate with Engineering, Quality, and Production teams to ensure smooth process implementation.
Provide technical support to the shop floor and troubleshoot manufacturing issues.
Lead and support continuous improvement and cost-reduction initiatives.
Utilize NX CAD software to develop, modify, and review models and tool designs.
Qualifications Bachelor’s Degree in Mechanical, Manufacturing, or related engineering field (or equivalent experience).
Proficient in interpreting engineering drawings, GD&T, and 3D modeling.
Experience developing manufacturing sequences and designing tooling and fixtures.
Skilled in NX CAD software.
Strong problem-solving abilities and the capacity to work independently in a fast-paced environment.
Excellent communication and collaboration skills.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $70,000
- $100,000 per year A bit about us: A leading manufacturer of complex aerospace components and critical safety components for military and commercial aircrafts.
Our reputation has been built on providing quality aerospace parts and exceptional customer support to the aviation industry.
Why join us? • Competitive base salary and overall compensation package • Full benefits: Medical, Dental, Vision • Generous PTO, vacation, sick, and holidays • Life Insurance coverage • 401 (K) with generous company match Job Details Monitor MRP signals (Material buys, job release dates, overdue/exception notices).
Review MPS/MRP and customer’s online portals for demand forecast while maintaining Min/Max levels.
Review material and outside vendor (OSV) processing requirements.
Create, release and maintain material requisitions and jobs to meet customer demand.
Submit and track status of Material and OSV requisitions; confirm PO creation.
Create and release work orders; maintain work order accuracy (Engineering Changes (ECs), process changes, reprints, etc.).
Coordinate with production, engineering, sales, purchasing & shipping/receiving to expedite the flow of work orders.
Monitor and take immediate reschedule action in case of customer demand changes (push-out or pull-ins).
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $38
- $50 per hour A bit about us: Founded nearly a century ago and based in South Windsor, Connecticut, we design and manufacture highly engineered components for aerospace and mission-critical applications, with additional operations across multiple U.S.
locations.
We are a precision-driven manufacturing organization where advanced machining, automation, and continuous improvement are core to how we operate.
Our teams work closely across engineering, operations, and production to deliver high-quality parts in a safety-focused, collaborative environment.
Why join us? Competitive Compensation: Hourly rate based on experience, with annual discretionary bonus eligibility Comprehensive Benefits: Medical, Dental, Vision, HSA/FSA, Life Insurance Retirement: 401(k) with company contribution Work-Life Balance: Monday–Thursday schedule with every other Friday off early High-Impact Role: Own programming strategy across advanced CNC equipment Modern Manufacturing: Automation, pallet changers, horizontal machining centers Stable, Growing Organization: Long-standing manufacturer with strong market demand Onsite Collaboration: Direct interaction with machinists, operators, and leadership Job Details Key Responsibilities and Duties: Program CNC turning and milling centers based on engineering drawings and specifications Create 3D models from drawings using Mastercam Develop efficient sequences of operations and optimal fixturing strategies Select and optimize tooling, cutters, and holders for quality and cycle time improvement Manage CNC program configuration control and revision accuracy Improve existing programs to enhance efficiency, quality, and throughput Communicate directly with machinists and operators on setup and program effectiveness Deploy CNC programs through the Visual ERP work order system Support cost estimating with setup and machining time estimates Generate work instructions and process sheets for operators Assist operators during setup and troubleshooting as needed Maintain accurate job records and documentation Follow all safety rules, PPE requirements, and housekeeping standards Collaborate cross-functionally to meet department and company goals Qualifications Needed: High School Diploma or equivalent Minimum 5 years of CNC programming experience Strong experience programming CNC lathes and milling machines Required: 4-Axis programming experience Preferred: 5-Axis programming experience Experience with machine automation and pallet changing systems Background with horizontal machining centers Proven fixture design and implementation experience Strong tooling knowledge and optimization skills Ability to program and support multiple machines simultaneously Ability to work independently with minimal supervision Strong communication, teamwork, and problem-solving skills U.S.
Person status required per export control regulations Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $38
- $50 per hour A bit about us: Founded nearly a century ago and based in South Windsor, Connecticut, we design and manufacture highly engineered components for aerospace and mission-critical applications, with additional operations across multiple U.S.
locations.
We are a precision-driven manufacturing organization where advanced machining, automation, and continuous improvement are core to how we operate.
Our teams work closely across engineering, operations, and production to deliver high-quality parts in a safety-focused, collaborative environment.
Why join us? Competitive Compensation: Hourly rate based on experience, with annual discretionary bonus eligibility Comprehensive Benefits: Medical, Dental, Vision, HSA/FSA, Life Insurance Retirement: 401(k) with company contribution Work-Life Balance: Monday–Thursday schedule with every other Friday off early High-Impact Role: Own programming strategy across advanced CNC equipment Modern Manufacturing: Automation, pallet changers, horizontal machining centers Stable, Growing Organization: Long-standing manufacturer with strong market demand Onsite Collaboration: Direct interaction with machinists, operators, and leadership Job Details Key Responsibilities and Duties: Program CNC turning and milling centers based on engineering drawings and specifications Create 3D models from drawings using Mastercam Develop efficient sequences of operations and optimal fixturing strategies Select and optimize tooling, cutters, and holders for quality and cycle time improvement Manage CNC program configuration control and revision accuracy Improve existing programs to enhance efficiency, quality, and throughput Communicate directly with machinists and operators on setup and program effectiveness Deploy CNC programs through the Visual ERP work order system Support cost estimating with setup and machining time estimates Generate work instructions and process sheets for operators Assist operators during setup and troubleshooting as needed Maintain accurate job records and documentation Follow all safety rules, PPE requirements, and housekeeping standards Collaborate cross-functionally to meet department and company goals Qualifications Needed: High School Diploma or equivalent Minimum 5 years of CNC programming experience Strong experience programming CNC lathes and milling machines Required: 4-Axis programming experience Preferred: 5-Axis programming experience Experience with machine automation and pallet changing systems Background with horizontal machining centers Proven fixture design and implementation experience Strong tooling knowledge and optimization skills Ability to program and support multiple machines simultaneously Ability to work independently with minimal supervision Strong communication, teamwork, and problem-solving skills U.S.
Person status required per export control regulations Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Information Security Consultant, Security Platforms Engineering, Enterprise Information Systems (EIS)
Full-Time, Hybrid – Springfield, MA
The Opportunity
Working closely with MassMutual business partners, you'll help design and implement solutions that address unique security challenges, streamline incident response, and automate critical workflows. The role is centered on building and maintaining resilient logging, data pipeline, and SOAR platforms in collaboration with the Security Operations Center and Security Intelligence teams, directly supporting our mission to enhance detection, response, and overall security posture.
The Team
We are looking for fast thinking, eager to learn team players to join the Security Platforms team. When you join the Security Platforms team, you'll be working with a group of people who are passionate about our security, innovation, and the success of our business partners.
The Impact:
This position offers the opportunity to play a key role in advancing our enterprise's centralized logging and SOAR capabilities. You will be responsible for deploying, managing, and optimizing centralized logging tools, data pipeline, and SOAR platforms at scale, ensuring robust visibility and rapid response across the organization. In addition, you will be working with internal customers and key stakeholders such as the Security Operations Center to onboard logs, manipulate data, create playbooks, write scripts, and configure integrations.
The Minimum Qualifications
- Bachelors Degree or equivalent professional experience
- 5+ years of experience in information technology field
- 1+ years experience with centralized logging, SIEM, and data pipeline
- Weekly on-call duties assigned based on team rotation (currently once every 10 weeks)
The Ideal Qualifications
- Maintaining SIEM and data pipeline platform stability, diagnosing and resolving issues related to the platforms, creating, responding to, and resolving alerts, onboarding and parsing data
- Experience with SOAR platforms
- Working knowledge of Terraform, GitHub, Jenkins, Amazon Machine Image (AMI) updates
- Experience with data manipulation and data science
- Expertise with regular expressions
- Hands on experience with or in support of any of the following vendors: Kafka, Sumo Logic, Splunk, Cribl, Crowdstrike, AWS, XSOAR, Torq, Palo Alto, Fortinet, Netskope, Google, Apple, Microsoft, Atlassian, and other applicable products preferred
- Experience with Linux system administration
- Experience with scripting languages, programming in JSON, JavaScript, python, and bash
- Experience with UNIX, Windows Servers, Java
- Knowledge of information security systems such as firewalls, intrusion detection, antivirus, data loss protection, vulnerability scanning, Active Directory, and LDAP
- Preferred knowledge of Database Management (MySQL, Sybase, Oracle, DB2, MS-SQL), building queries and developing stored procedures
- Information security solutions development either from an architect or engineering perspective
- Experience troubleshooting inside of a corporate network
- Experience with secure data communications and applications
- Extensive knowledge of current and upcoming IT security technologies
- Excellent written and oral communication skills and customer service skills
- Exceptional troubleshooting skills and ability to problem solve with little to no supervision
- Working knowledge of ServiceNow and JIRA tickets for customer assistance
What to Expect as Part of MassMutual and the Team
- Regular collaboration within the Security Platforms Engineering team
- Focused one-on-one time with your manager
- Networking opportunities including access to Asian, Hispanic/Latinx, African American, women, LGBTQIA+, veteran and disability-focused Business Resource Groups
- Access to learning content on Degreed and other informational platforms
- Your ethics and integrity will be valued by a company with a strong and stable ethical business with industry leading pay and benefits
#LI-RK1
MassMutual is an equal employment opportunity employer. We welcome all persons to apply.If you need an accommodation to complete the application process, please contact us and share the specifics of the assistance you need.
The Opportunity
Join our team as an Enterprise Architect in an industry leading EA function that creates alignment between technology and business strategy. You will have an opportunity to guide the process of planning and designing capabilities to maximize the value of IT and enable the company to make high impact, long-term decisions supporting the Corporate Technology Organization in Investment Management(Portfolio Management, Derivatives, Credit & Market Risk functions). This will be accomplished through architecture strategies, blueprints and road maps that standardize technology stacks which create engineering speed and agility through the innovative use of data science, data analytics, cloud and API's. The EA will work with a team that embrace diversity in all of its forms, respect and have fun.
The Team
The MassMutual Enterprise Architecture team in the Enterprise Technology and Experience organization is seeking an outstanding Enterprise Architect (Application) to join our team. Enterprise Architecture is composed of Business, Application, Technology & Design and Security architecture domains. Joining this team will give the Application EA a unique perspective and opportunity to partner with best-in-class architects on enterprise wide technology initiatives.
The Impact:
This role will work with Corporate Technology Finance & Investment Management line of business delivery teams, engineers, application operations, product managers, and enterprise stakeholders to help deliver innovative, data-driven systems aimed at transforming the insurance industry. As part of the application architecture team, incumbents may be responsible for any of the following:
- Technical evaluations and benchmarking of core application platforms, frameworks and technologies
- Specification and publication of standards around application design and software engineering best practices
- Thought leadership and active participation in conferences and research with strategic partners and academic institutions
- Partner with senior leaders to develop and maintain the Technology strategies & roadmap
- Partner with business executives and senior architects to identify data and process issues, then provide solution options and recommends options
- Provide recommendations on system options, risks, cost/benefit analysis, and impact on cross-domain systems, business strategy, goals and processes
- Engage in SA problem solving, snapshots and full architecture documents
- Actively publish deliverables, and utilizes multi-media to educate and engage with federated solution architecture community members
- Collaborate with extended enterprise architecture, business, and IT support teams to communicate architecture strategies, standards, and direction
- Stay abreast of emerging technologies
The Minimum Qualifications
- Bachelors degree in Computer Science, Engineering or related Technical degree
- 8+ years of related IT Solutions Architecture or Technical Lead experience
The Ideal Qualifications
- 10+ years of related IT Architecture or IT consulting experience
- 5 years of Investment Management and/or Finance experience
- Emerging Technologies in Investment Management including AI/ML
- Experience with IM Platforms: Eagle, Aladdin, Calypso, Murex or similar
- Experience in data management platform design and integrations, ABOR/IBOR data layer, data modeling for IM domain, data framework adoption, mastering solution design.
- Excellent communication, presentation, influencing and reasoning skills
- A team-focused mentality with proven ability to work effectively with diverse stakeholders
- Strong interpersonal skills, with an emphasis on the ability to effectively influence others, collaborate and partner.
- Understanding of the impact of IT on business results
- Demonstrated experience using Architecture Methodology (TOGAF, Archimate)
- Strong decision-making capabilities, with a proven ability to weigh the relative costs and benefits of potential actions and identify the most appropriate one
- Experience in Public Cloud platforms (preferably AWS), solution design and development using Cloud-native services, and understanding of cost rationalization.
- AWS/Azure Cloud Certification
- Strong experience in Architecture and Design patterns
- Developed acumen in Domain Driven Design
- Strong experience with event streaming design and implementation using Kafka, along with web service protocols and patterns like SOAP, REST, JSON, XML/XSDs.
- Experience with REST API for data interchange and API-driven systems integration decoupling digital and backend systems.
- Track record of designing architectural reference material
What to Expect as Part of MassMutual and the Team
- Regular meetings with the Enterprise Architecture team
- Focused one-on-one meetings with your manager
- Access to mentorship opportunities
- Networking opportunities including access to Asian, Hispanic/Latinx, African American, women, LGBTQ, veteran and disability-focused Business Resource Groups
- Access to learning content on Degreed and other informational platforms
- Your ethics and integrity will be valued by a company with a strong and stable ethical nosiness with industry leading pay and benefits
#LI-RK1
MassMutual is an equal employment opportunity employer. We welcome all persons to apply.If you need an accommodation to complete the application process, please contact us and share the specifics of the assistance you need.
The Opportunity
Join an industry leading EA function within MassMutual that creates alignment between technology and business strategy. You will have an opportunity to guide the process of planning and designing capabilities to maximize the value of IT and enable the company to make high impact, long-term decisions. This will be accomplished through architecture strategies, blueprints and road maps that standardize technology stacks which create engineering speed and agility through the innovative use of data science, data analytics, cloud and API's. The EA will work with a team that embrace diversity in all of its forms, respect and have fun.
The Team
The MassMutual Enterprise Architecture team in the Enterprise Technology and Experience organization is seeking an outstanding Enterprise Architect (Application) to join our team. Enterprise Architecture is composed of Business, Application, Infrastructure, Technology & Design and Security architecture domains. Joining this team will give the Application EA a unique perspective and opportunity to partner with best-in-class architects on enterprise wide technology initiatives.
The Impact:
This role will work with the Wealth Management line of business delivery teams, engineers, application operations, product managers, and enterprise stakeholders to help deliver innovative, data-driven systems aimed at transforming the insurance industry. As part of the application architecture team, incumbents may be responsible for any of the following:
- Partner with senior leaders to develop and maintain the Technology strategies & roadmap focused on Wealth Management
- Technical evaluations and benchmarking of core application platforms, frameworks and technologies
- Specification and publication of standards around application design and software engineering best practices
- Thought leadership and active participation in conferences and research with strategic partners and academic institutions
- Partner with business executives and senior architects to identify data and process issues, then provide solution options and recommends options
- Provide recommendations on system options, risks, cost/benefit analysis, and impact on cross-domain systems, business strategy, goals and processes
- Engage in SA problem solving, snapshots and full architecture documents
- Actively publish deliverables, and utilizes multi-media to educate and engage with federated solution architecture community members
- Collaborate with extended enterprise architecture, business, and IT support teams to communicate architecture strategies, standards, and direction
- Stay abreast of emerging technologies
The Minimum Qualifications
- Bachelors degree in Computer Science, Engineering or related Technical degree
- 8+ years of related IT Solutions Architecture or Technical Lead experience
The Ideal Qualifications
- 10+ years of related IT Architecture or IT consulting experience
- Preferred job experience includes some knowledge of Insurance and Wealth Management
- Experience with technology supporting: Financial Planning, Order Management, Lending, Wealth Investment Products, etc.
- Excellent communication, presentation, influencing and reasoning skills
- A team-focused mentality with proven ability to work effectively with diverse stakeholders
- Strong interpersonal skills, with an emphasis on the ability to effectively influence others, collaborate and partner.
- Understanding of the impact of IT on business results
- Demonstrated experience using Architecture Methodology (TOGAF, Archimate)
- Strong decision-making capabilities, with a proven ability to weigh the relative costs and benefits of potential actions and identify the most appropriate one
- Experience in Public Cloud platforms (preferably AWS), solution design and development using Cloud-native services, and understanding of cost rationalization.
- AWS/Azure Cloud Certification
- Strong experience in Architecture and Design patterns
- Developed acumen in Domain Driven Design
- Strong experience with event streaming design and implementation using Kafka, along with web service protocols and patterns like SOAP, REST, JSON, XML/XSDs.
- Experience with REST API for data interchange and API-driven systems integration decoupling digital and backend systems.
- Track record of designing architectural reference material
What to Expect as Part of MassMutual and the Team
- Regular meetings with the Enterprise Architecture team
- Focused one-on-one meetings with your manager
- Access to mentorship opportunities
- Networking opportunities including access to Asian, Hispanic/Latinx, African American, women, LGBTQ, veteran and disability-focused Business Resource Groups
- Access to learning content on Degreed and other informational platforms
- Your ethics and integrity will be valued by a company with a strong and stable ethical nosiness with industry leading pay and benefits
#LI-RK1
MassMutual is an equal employment opportunity employer. We welcome all persons to apply.If you need an accommodation to complete the application process, please contact us and share the specifics of the assistance you need.
As an Accenture Flex employee, you will apply your skills and experience to help drive business transformation for leading organizations and communities. In addition to delivering innovative solutions for Accenture's clients, you will work with a highly skilled, diverse network of people across Accenture businesses who are using the latest emerging technologies to address today's biggest business challenges.
You will receive competitive rewards and access to benefits programs and world-class learning resources. Accenture Flex employees work in their local metro area onsite at the project, significantly reducing and/or eliminating the demands to travel.
Key Responsibilities:
- Establish a rigorous "Definition of Done" for ADA that is integrated into every stage of the Software Development Life Cycle (SDLC).
- Design and implement a Quality Framework that balances automated scanning with high-fidelity manual testing protocols.
- Architect the workflow that ensures accessibility requirements are captured at the design/discovery phase, reducing remediation costs and technical debt.
- Act as a technical mentor to Frontend and Fullstack developers, moving them beyond "div-soup" toward robust, semantic HTML and ARIA patterns.
- Create a library of accessible component patterns and documentation that empowers engineering teams to build right the first time.
- Evangelize the importance of accessibility across the organization, transforming it from a "QA task" into a shared engineering value.
- Conduct expert-level manual audits using Fusion (ZoomText + JAWS) to identify nuanced UX barriers that automated tools miss.
- Lead the organizational transition to full JAWS adoption, ensuring all internal and external platforms are optimized for screen-reader power users.
- Provide clear, actionable remediation roadmaps based on complex audits, translating technical failures into engineering solutions.
The ideal candidate:
- You possess deep, expert-level proficiency in Fusion (JAWS and ZoomText). You understand the nuances of how low-vision and blind users interact with complex web applications.
- You have a profound understanding of the DOM, semantic HTML5, and the WAI-ARIA 1.2+ specifications.
- You have a proven track record of building accessibility programs in enterprise environments—not just executing tests but defining how testing is done.
- You can translate WCAG 2.1/2.2 AA (and AAA) standards into plain language for Product Managers and high-level strategy for Executives.
***Role requires onsite office work 3 days per week at an Accenture corporate office located in the Eastern time zone