Engineering Structures Jobs in Findlay Ohio Remote
465 positions found — Page 4
B
Mechanic II-Remote Locations
Salary not disclosed
$2,500 Sign On Bonus! PURPOSE OF THIS POSITION The purpose of a Mechanic II is to perform a variety of duties in and around the Health System facilities and properties to operate, maintain, and repair equipment and physical structures under the direction of the Supervisor of Facility Services or his designee.
JOB DUTIES/RESPONSIBILITIES Duty 1: Responsible for the maintenance activities at all Remote BVHS locations / facilities.
Remote locations are both Commercial and Residential.
Excluding Findlay and Bluffton hospitals, there are approximately 30 locations to be maintained.
This includes leased locations where BVHS has maintenance responsibilities.
Duty 2: In conjunction with Supervisor and/or Manager of Facility Services, coordinates with internal resources (HVAC Technicians, Electricians, and Fire Safety Specialist) along with Contractors to fulfill repairs, as needed, based on skillset and scope of work.
Duty 3: Performs plumbing duties as required: 1) Performs troubleshooting to diagnose potential problems and makes necessary repairs to pumps, couplings, seals, valves, piping, steam traps and related equipment.
2) Performs pipefitting such as cutting and threading, solder and brazing, use of manual threading machine and assorted gas torches.
3) Performs installation and layout of various plumbing systems, steam, water, gas and oil.
4) Demonstrates initiative with keeping updated and informed on new systems and equipment.
Duty 4: Performs electrical duties as required: 1) Troubleshoots, repairs, maintains and installs electronic, electrical circuits and related equipment.
2) Performs installation and repairs on electrical circuits of 12V to 277V AC/DC.
3) Performs installation and repairs to electrical control circuitry on machinery and mechanical systems.
4) Performs general troubleshooting and repairs on nurse call system.
5) Shares knowledge and changes made to electrical systems with others.
6) Ability to use electrical testing and measuring equipment.
7) Maintains a good understanding of the electrical distribution system and locations of disconnects and shut-offs for areas served.
8) Maintains safety by following Energy Control Procedures and Arc Flash guidelines.
9) Understands emergency power distribution and generator monthly load tests.
Duty 5: Performs mechanical duties as required: 1) Repairs and maintains machinery and mechanical equipment.
2) Performs troubleshooting and repairs to machinery and mechanical equipment such as bearings, motors, pumps, seals, couplings and related equipment.
3) Ability to install, set-up, calibrate, program controls and process within the building automated system.
4) Performs preventative maintenance on schedule to prevent potential problems.
5) Understands the lay-out and distribution of mechanical systems such as air handlers, medical gases, pneumatic system, chillers, boilers, heating water, cooling water and minor refrigeration.
Duty 6: Maintains communication systems as required: 1) Performs troubleshooting, repairs to nurse call systems and related devices, televisions, paging system and fire alarm systems and devices.
Duty 7: Assesses and maintains architectural structure of the facilities.
Ensures exterior building issues are identified and resolved in a timely manner.
Duty 8: Ensures a safe and comfortable environment for patient, staff and visitors.
1) Demonstrates geographic knowledge and locations of system shut-offs throughout the hospital in the event of an emergency.
2) Changes faulty lights, ballasts, outlets and switches promptly to ensure a safe environment.
3) Performs inspection tours as scheduled with the ability to foresee and notice abnormalities in the operation of mechanical equipment.
4) Participates in hospital and department in-service education and training programs.
5) Arranges storage and retrieval of equipment and furniture.
Duty 9: Accepts and responds to emergencies, codes, fire, and disasters.
1) Responds to all fire alarms as described in the department policy and procedure manual.
2) Responds promptly to assist in the event of an emergency.
Duty 10: Performs related responsibilities as required or directed.
1) Responds and volunteers when needed.
2) Accepts and assumes other staffs duties in their absence as needed.
3) Shows willingness to accept additional duties.
4) Utilizes available time effectively.
5) Maintains a stock par level of supplies in designated area to “speed up” the delivery of customer satisfaction.
Duty 11: Adheres to BVHA’s policies and procedures to ensure compliance with all regulatory agencies.
Duty 12: Maintains maintenance vehicle.
Responsible for associated equipment and tools.
REQUIRED QUALIFICATIONS High school diploma.
Minimum of 5 consecutive years’ experience in mechanical field.
Mechanical aptitude and ability to read and follow instruction manuals, including drawings and parts lists.
Knowledge of institutional maintenance principles and techniques including applicable local, state and federal codes (i.e., building, plumbing, electrical) Approximately three to five years progressively more responsible related work experience in an institutional setting necessary to gain advanced knowledge of maintenance and engineering as it relates to facility operations and be able to coordinate planning of preventative maintenance activities.
Thorough knowledge of hand/power tools and testing instruments.
Working knowledge of mechanical equipment, electricity, and plumbing.
General knowledge of HVAC systems and fire alarm systems.
May be required to work any shift, fixed or rotated and days off may be fixed or rotated.
A valid driver's license is required, and you must also meet BVHS's company fleet policy requirements Positive service-oriented interpersonal and communication skills required.
PHYSICAL DEMANDS This position requires a full range of body motion with intermittent activities of lifting, bending, squatting, and twisting.
The associate is required to walk and stand for eight hours a day.
This position requires associate to lift fifty pounds and reach work above the shoulders.
This associate must have corrected vision and hearing in the normal range.
This position is classified “at risk” for possible occupational exposure to blood borne pathogens (HBV, HIV, etc.)
Remote working/work at home options are available for this role.
JOB DUTIES/RESPONSIBILITIES Duty 1: Responsible for the maintenance activities at all Remote BVHS locations / facilities.
Remote locations are both Commercial and Residential.
Excluding Findlay and Bluffton hospitals, there are approximately 30 locations to be maintained.
This includes leased locations where BVHS has maintenance responsibilities.
Duty 2: In conjunction with Supervisor and/or Manager of Facility Services, coordinates with internal resources (HVAC Technicians, Electricians, and Fire Safety Specialist) along with Contractors to fulfill repairs, as needed, based on skillset and scope of work.
Duty 3: Performs plumbing duties as required: 1) Performs troubleshooting to diagnose potential problems and makes necessary repairs to pumps, couplings, seals, valves, piping, steam traps and related equipment.
2) Performs pipefitting such as cutting and threading, solder and brazing, use of manual threading machine and assorted gas torches.
3) Performs installation and layout of various plumbing systems, steam, water, gas and oil.
4) Demonstrates initiative with keeping updated and informed on new systems and equipment.
Duty 4: Performs electrical duties as required: 1) Troubleshoots, repairs, maintains and installs electronic, electrical circuits and related equipment.
2) Performs installation and repairs on electrical circuits of 12V to 277V AC/DC.
3) Performs installation and repairs to electrical control circuitry on machinery and mechanical systems.
4) Performs general troubleshooting and repairs on nurse call system.
5) Shares knowledge and changes made to electrical systems with others.
6) Ability to use electrical testing and measuring equipment.
7) Maintains a good understanding of the electrical distribution system and locations of disconnects and shut-offs for areas served.
8) Maintains safety by following Energy Control Procedures and Arc Flash guidelines.
9) Understands emergency power distribution and generator monthly load tests.
Duty 5: Performs mechanical duties as required: 1) Repairs and maintains machinery and mechanical equipment.
2) Performs troubleshooting and repairs to machinery and mechanical equipment such as bearings, motors, pumps, seals, couplings and related equipment.
3) Ability to install, set-up, calibrate, program controls and process within the building automated system.
4) Performs preventative maintenance on schedule to prevent potential problems.
5) Understands the lay-out and distribution of mechanical systems such as air handlers, medical gases, pneumatic system, chillers, boilers, heating water, cooling water and minor refrigeration.
Duty 6: Maintains communication systems as required: 1) Performs troubleshooting, repairs to nurse call systems and related devices, televisions, paging system and fire alarm systems and devices.
Duty 7: Assesses and maintains architectural structure of the facilities.
Ensures exterior building issues are identified and resolved in a timely manner.
Duty 8: Ensures a safe and comfortable environment for patient, staff and visitors.
1) Demonstrates geographic knowledge and locations of system shut-offs throughout the hospital in the event of an emergency.
2) Changes faulty lights, ballasts, outlets and switches promptly to ensure a safe environment.
3) Performs inspection tours as scheduled with the ability to foresee and notice abnormalities in the operation of mechanical equipment.
4) Participates in hospital and department in-service education and training programs.
5) Arranges storage and retrieval of equipment and furniture.
Duty 9: Accepts and responds to emergencies, codes, fire, and disasters.
1) Responds to all fire alarms as described in the department policy and procedure manual.
2) Responds promptly to assist in the event of an emergency.
Duty 10: Performs related responsibilities as required or directed.
1) Responds and volunteers when needed.
2) Accepts and assumes other staffs duties in their absence as needed.
3) Shows willingness to accept additional duties.
4) Utilizes available time effectively.
5) Maintains a stock par level of supplies in designated area to “speed up” the delivery of customer satisfaction.
Duty 11: Adheres to BVHA’s policies and procedures to ensure compliance with all regulatory agencies.
Duty 12: Maintains maintenance vehicle.
Responsible for associated equipment and tools.
REQUIRED QUALIFICATIONS High school diploma.
Minimum of 5 consecutive years’ experience in mechanical field.
Mechanical aptitude and ability to read and follow instruction manuals, including drawings and parts lists.
Knowledge of institutional maintenance principles and techniques including applicable local, state and federal codes (i.e., building, plumbing, electrical) Approximately three to five years progressively more responsible related work experience in an institutional setting necessary to gain advanced knowledge of maintenance and engineering as it relates to facility operations and be able to coordinate planning of preventative maintenance activities.
Thorough knowledge of hand/power tools and testing instruments.
Working knowledge of mechanical equipment, electricity, and plumbing.
General knowledge of HVAC systems and fire alarm systems.
May be required to work any shift, fixed or rotated and days off may be fixed or rotated.
A valid driver's license is required, and you must also meet BVHS's company fleet policy requirements Positive service-oriented interpersonal and communication skills required.
PHYSICAL DEMANDS This position requires a full range of body motion with intermittent activities of lifting, bending, squatting, and twisting.
The associate is required to walk and stand for eight hours a day.
This position requires associate to lift fifty pounds and reach work above the shoulders.
This associate must have corrected vision and hearing in the normal range.
This position is classified “at risk” for possible occupational exposure to blood borne pathogens (HBV, HIV, etc.)
Remote working/work at home options are available for this role.
Not Specified
B
Electrical Technician - Full Time, 1st Shift
🏢 Blanchard Valley Hospital
Salary not disclosed
$2,500 Sign On Bonus! PURPOSE OF THIS POSITION The purpose of an Electrical Technician is to perform a variety of duties in and around the Health System facilities and properties to operate, maintain, and repair equipment and physical structures under the direction of the Manager of Facility Services or his designee.
JOB DUTIES/RESPONSIBILITIES Duty 1: Adheres to BVHS’s policies and procedures to ensure compliance with all regulatory agencies.
Duty 2: Develops processes and procedures to ensure continual delivery of electrical services to BVHS.
Duty 3: Ability to service / maintain electrical equipment but not limited to the following: Install / maintain high voltage circuits Install / maintain low voltage circuits Working knowledge of all types of electrical motors Able to size wire and connectors Maintain 480 volt emergency switch gear Oversee and install various electrical components Working knowledge of National Electric Code Understanding and applying computerized building monitoring systems Small appliance repair Operate tools specifically used in electrical field.
All other related systems as required Duty 4: Achieves two competency evaluations from Facility Services Associates to enhance the development of qualified individuals.
Duty 5: Ensures all Facility Services Associates are trained on new electrical equipment or changes in procedures.
Duty 6: Performs electrical, and mechanical duties as required.
Duty 7: Maintains communication systems as required.
Duty 8: Assesses and maintains architectural structure of the hospital.
Duty 9: Ensures a safe and comfortable environment for patient, staff and visitors.
Duty10: Accepts and responds to emergencies, codes, fire, and disasters.
Duty 11: Performs related accountabilities responsibilities as required or directed.
REQUIRED QUALIFICATIONS High school education with a minimum of 5 consecutive years’ experience in related field required.
Holds a State of Ohio Fire License or will achieve fire license.
Maintains skill level with appropriate training and uses various methods to ensure continual improvement.
Mechanical aptitude and ability to read and follow instruction manuals, including drawings and parts lists.
General knowledge of HVAC systems and fire alarm systems.
Thorough knowledge of hand/power tools and testing instruments.
Working knowledge of electricity and mechanical equipment May be required to work any shift, fixed or rotated and days off may be fixed or rotated.
A valid driver's license is required (if you do not have a valid Ohio driver’s license you must obtain one within 30 days of your residency in the state).
You must also meet BVHS's company fleet policy and insurance company requirements, and any other requirements that may be required to operate a vehicle.
Positive service-oriented interpersonal and communication skills required.
Individual must be able to demonstrate the knowledge and skills necessary to provide care appropriate to the age of the patient served on his/her assigned unit/department.
The individual must demonstrate knowledge of the principles of growth and development over the life span and possess the ability to assess data reflective of the patient status and interpret the appropriate information needed to identify each patient’s requirements relative to their age-specific needs and to provide the care needed as described in the area’s policies and procedures.
PHYSICAL DEMANDS This position requires a full range of body motion with intermittent activities in walking, lifting, bending, squatting, climbing, kneeling, twisting and standing.
The individual must be able to lift up to seventy-five pounds and reach work above the shoulders.
The associate must have appropriate eye-hand coordination.
This associate must have corrected vision and hearing in the normal range.
The individual must have appropriate verbal communication skills to perform daily tasks.
***This position is classified “at risk” for possible occupational exposure to blood borne pathogens (HBV, HIV, etc.)
JOB DUTIES/RESPONSIBILITIES Duty 1: Adheres to BVHS’s policies and procedures to ensure compliance with all regulatory agencies.
Duty 2: Develops processes and procedures to ensure continual delivery of electrical services to BVHS.
Duty 3: Ability to service / maintain electrical equipment but not limited to the following: Install / maintain high voltage circuits Install / maintain low voltage circuits Working knowledge of all types of electrical motors Able to size wire and connectors Maintain 480 volt emergency switch gear Oversee and install various electrical components Working knowledge of National Electric Code Understanding and applying computerized building monitoring systems Small appliance repair Operate tools specifically used in electrical field.
All other related systems as required Duty 4: Achieves two competency evaluations from Facility Services Associates to enhance the development of qualified individuals.
Duty 5: Ensures all Facility Services Associates are trained on new electrical equipment or changes in procedures.
Duty 6: Performs electrical, and mechanical duties as required.
Duty 7: Maintains communication systems as required.
Duty 8: Assesses and maintains architectural structure of the hospital.
Duty 9: Ensures a safe and comfortable environment for patient, staff and visitors.
Duty10: Accepts and responds to emergencies, codes, fire, and disasters.
Duty 11: Performs related accountabilities responsibilities as required or directed.
REQUIRED QUALIFICATIONS High school education with a minimum of 5 consecutive years’ experience in related field required.
Holds a State of Ohio Fire License or will achieve fire license.
Maintains skill level with appropriate training and uses various methods to ensure continual improvement.
Mechanical aptitude and ability to read and follow instruction manuals, including drawings and parts lists.
General knowledge of HVAC systems and fire alarm systems.
Thorough knowledge of hand/power tools and testing instruments.
Working knowledge of electricity and mechanical equipment May be required to work any shift, fixed or rotated and days off may be fixed or rotated.
A valid driver's license is required (if you do not have a valid Ohio driver’s license you must obtain one within 30 days of your residency in the state).
You must also meet BVHS's company fleet policy and insurance company requirements, and any other requirements that may be required to operate a vehicle.
Positive service-oriented interpersonal and communication skills required.
Individual must be able to demonstrate the knowledge and skills necessary to provide care appropriate to the age of the patient served on his/her assigned unit/department.
The individual must demonstrate knowledge of the principles of growth and development over the life span and possess the ability to assess data reflective of the patient status and interpret the appropriate information needed to identify each patient’s requirements relative to their age-specific needs and to provide the care needed as described in the area’s policies and procedures.
PHYSICAL DEMANDS This position requires a full range of body motion with intermittent activities in walking, lifting, bending, squatting, climbing, kneeling, twisting and standing.
The individual must be able to lift up to seventy-five pounds and reach work above the shoulders.
The associate must have appropriate eye-hand coordination.
This associate must have corrected vision and hearing in the normal range.
The individual must have appropriate verbal communication skills to perform daily tasks.
***This position is classified “at risk” for possible occupational exposure to blood borne pathogens (HBV, HIV, etc.)
permanent
T
Senior Radiation Oncology Medical Physicist
Salary not disclosed
PURPOSE OF THIS POSITION The senior physicist uses their knowledge of physics to develop and us medical radiation treatment, devices, and technologies.
Their responsibilities include planning radiation treatments, ensuring patients receive the correct dose, and directly participating in a patient's diagnosis and treatment.
Working in radiotherapy physics, the physicist will be responsible for the precision and accuracy of treatments by sing advanced computer calculations to develop individual patient treatment plans.
The physicist will use images of the cancer to outline target volume.
In addition, the physicist will ensure equipment in safe, effective, and working properly, and maintaining it at high quality standards, while performing QA and troubleshooting.
The physicist will study how radiation affects the body, researching new treatment options, and developing new safety procedures.
There are additional expectations around teaching other team members, advising on radiation safety and identifying problems, developing clinical solutions, and implementing quality management programs.
The senior physicist serves as the designated Certified Radiation Expert for the Armes Family Cancer Care Center.
JOB DUTIES/RESPONSIBILITIES Duty 1: Responsible for maintaining and executing the Radiation Oncology Quality Assurance and Safety program (policies and procedures) for radiation therapy and provides appropriate support to staff in this regard.
Duty 2.
Implements, manages and maintains all medical physics ancillary QA equipment including preventative maintenance and routine calibrations (e.g., pt.
diodes, daily therapist QA).
Duty 3.
Coordinates with alternate physicist to ensure on site coverage of patient care during clinic hours and coverage for vacations and illness.
Maintains calendar of coverage and communicates changes at least 30 days in advance.
Available for emergency consultation when necessary.
Duty 4.
Responsible for ensuring all local/state/federal regulations and accreditation standards related to medical physics services are met Duty 5.
Consults with Radiation Oncologists, Dosimetrists, and Therapists to ensure safe and effective treatment of patients.
Responsible for initial physics consultation with radiation oncologist and dosimetrist for plan development and review.
Consultative support of radiation oncologist including special dose measurements, calculations, etc.
Duty 6.
Responsible for administration and maintenance of all software systems including treatment planning systems, monitor unit calculation systems, and QA software including oversight of software upgrades.
Duty 7.
Performs daily, monthly and annual quality assurance testing on all linear accelerators, CT simulators and treatment planning systems in accordance with local/state/federal regulations.
Serves as point of contact for consulting on equipment downtime.
Duty 8.
Responsible for oversight of dosimetrist to include plan reviews for each patient.
Assists dosimetrist in planning as necessary and is responsible for quality assurance of each patient plan including special quality assurance for IMRT planning.
Participates in weekly chart round reviews.
Duty 9.
Performs dosimetry functions in the absence of dosimetrist Duty 10.
Present at machine for all HyperArc/SBRT/SRS/SRT, high dose treatments and any other treatments as determined by the radiation oncologists.
Duty 11.
Responsible for commissioning and maintaining of HyperArc & stereotactic machine model in treatment planning system.
Responsible for maintenance and utilization of stereotactic & HyperArc ancillary quality assurance equipment.
Serves as point of contact for all surveys related to radiation safety from regulatory bodies.
Duty 12.
Performs weekly patient chart reviews and is responsible for Maintenance of all records pertaining to patient consults and quality assurance as needed.
Duty 13.
Responsible for all physics test credentialing, planning, and oversight of RTOG protocol participation.
Initiates, implements and performs procedures if program is seeking additional treatment types, accreditations or certifications.
REQUIRED QUALIFICATIONS Master of Science degree in physics, biophysics, medical physics, radiological physics, nuclear engineering or health physics Certified by the American Board of Radiology in Therapeutic Medical Physics Minimum of 3+ years’ experience Certified Radiation Expert (CRE) certification through the state of Ohio PHYSICAL DEMANDS This position requires a full range of body motion with intermittent walking, lifting, bending, squatting, kneeling, twisting and standing.
The associate will be required to walk for up to one hour a day, sit continuously for six hours a day and stand for one hour a day.
The individual must be able to lift twenty to fifty pounds and reach work above the shoulders.
The individual must have good eye-hand coordination and fine finger dexterity for simple grasping tasks.
The individual must have excellent verbal communication skills to perform daily tasks.
The associate must have corrected vision and hearing in the normal range.
The individual must be able to operate a motor vehicle for business travel and community involvement.
***This position is classified “at risk” for possible occupational exposure to blood borne pathogens (HBV, HIV, etc.)
Their responsibilities include planning radiation treatments, ensuring patients receive the correct dose, and directly participating in a patient's diagnosis and treatment.
Working in radiotherapy physics, the physicist will be responsible for the precision and accuracy of treatments by sing advanced computer calculations to develop individual patient treatment plans.
The physicist will use images of the cancer to outline target volume.
In addition, the physicist will ensure equipment in safe, effective, and working properly, and maintaining it at high quality standards, while performing QA and troubleshooting.
The physicist will study how radiation affects the body, researching new treatment options, and developing new safety procedures.
There are additional expectations around teaching other team members, advising on radiation safety and identifying problems, developing clinical solutions, and implementing quality management programs.
The senior physicist serves as the designated Certified Radiation Expert for the Armes Family Cancer Care Center.
JOB DUTIES/RESPONSIBILITIES Duty 1: Responsible for maintaining and executing the Radiation Oncology Quality Assurance and Safety program (policies and procedures) for radiation therapy and provides appropriate support to staff in this regard.
Duty 2.
Implements, manages and maintains all medical physics ancillary QA equipment including preventative maintenance and routine calibrations (e.g., pt.
diodes, daily therapist QA).
Duty 3.
Coordinates with alternate physicist to ensure on site coverage of patient care during clinic hours and coverage for vacations and illness.
Maintains calendar of coverage and communicates changes at least 30 days in advance.
Available for emergency consultation when necessary.
Duty 4.
Responsible for ensuring all local/state/federal regulations and accreditation standards related to medical physics services are met Duty 5.
Consults with Radiation Oncologists, Dosimetrists, and Therapists to ensure safe and effective treatment of patients.
Responsible for initial physics consultation with radiation oncologist and dosimetrist for plan development and review.
Consultative support of radiation oncologist including special dose measurements, calculations, etc.
Duty 6.
Responsible for administration and maintenance of all software systems including treatment planning systems, monitor unit calculation systems, and QA software including oversight of software upgrades.
Duty 7.
Performs daily, monthly and annual quality assurance testing on all linear accelerators, CT simulators and treatment planning systems in accordance with local/state/federal regulations.
Serves as point of contact for consulting on equipment downtime.
Duty 8.
Responsible for oversight of dosimetrist to include plan reviews for each patient.
Assists dosimetrist in planning as necessary and is responsible for quality assurance of each patient plan including special quality assurance for IMRT planning.
Participates in weekly chart round reviews.
Duty 9.
Performs dosimetry functions in the absence of dosimetrist Duty 10.
Present at machine for all HyperArc/SBRT/SRS/SRT, high dose treatments and any other treatments as determined by the radiation oncologists.
Duty 11.
Responsible for commissioning and maintaining of HyperArc & stereotactic machine model in treatment planning system.
Responsible for maintenance and utilization of stereotactic & HyperArc ancillary quality assurance equipment.
Serves as point of contact for all surveys related to radiation safety from regulatory bodies.
Duty 12.
Performs weekly patient chart reviews and is responsible for Maintenance of all records pertaining to patient consults and quality assurance as needed.
Duty 13.
Responsible for all physics test credentialing, planning, and oversight of RTOG protocol participation.
Initiates, implements and performs procedures if program is seeking additional treatment types, accreditations or certifications.
REQUIRED QUALIFICATIONS Master of Science degree in physics, biophysics, medical physics, radiological physics, nuclear engineering or health physics Certified by the American Board of Radiology in Therapeutic Medical Physics Minimum of 3+ years’ experience Certified Radiation Expert (CRE) certification through the state of Ohio PHYSICAL DEMANDS This position requires a full range of body motion with intermittent walking, lifting, bending, squatting, kneeling, twisting and standing.
The associate will be required to walk for up to one hour a day, sit continuously for six hours a day and stand for one hour a day.
The individual must be able to lift twenty to fifty pounds and reach work above the shoulders.
The individual must have good eye-hand coordination and fine finger dexterity for simple grasping tasks.
The individual must have excellent verbal communication skills to perform daily tasks.
The associate must have corrected vision and hearing in the normal range.
The individual must be able to operate a motor vehicle for business travel and community involvement.
***This position is classified “at risk” for possible occupational exposure to blood borne pathogens (HBV, HIV, etc.)
Not Specified
T
Radiation Oncology Medical Physicist
🏢 The Armes Family Cancer Care Center
Salary not disclosed
PURPOSE OF THIS POSITION The physicist uses their knowledge of physics to develop and us medical radiation treatment, devices, and technologies.
Their responsibilities include planning radiation treatments, ensuring patients receive the correct dose, and directly participating in a patient's diagnosis and treatment.
Working in radiotherapy physics, the physicist will be responsible for the precision and accuracy of treatments by sing advanced computer calculations to develop individual patient treatment plans.
The physicist will use images of the cancer to outline target volume.
In addition, the physicist will ensure equipment in safe, effective, and working properly, and maintaining it at high quality standards, while performing QA and troubleshooting.
The physicist will study how radiation affects the body, researching new treatment options, and developing new safety procedures.
There are additional expectations around teaching other team members, advising on radiation safety and identifying problems, developing clinical solutions, and implementing quality management programs.
JOB DUTIES/RESPONSIBILITIES Duty 1: Responsible for maintaining and executing the Radiation Oncology Quality Assurance and Safety program (policies and procedures) for radiation therapy and provides appropriate support to staff in this regard.
Duty 2.
Implements, manages and maintains all medical physics ancillary QA equipment including preventative maintenance and routine calibrations (e.g., pt.
diodes, daily therapist QA).
Duty 3.
Coordinates with alternate physicist to ensure on site coverage of patient care during clinic hours and coverage for vacations and illness.
Maintains calendar of coverage and communicates changes at least 30 days in advance.
Available for emergency consultation when necessary.
Duty 4.
Responsible for ensuring all local/state/federal regulations and accreditation standards related to medical physics services are met Duty 5.
Consults with Radiation Oncologists, Dosimetrists, and Therapists to ensure safe and effective treatment of patients.
Responsible for initial physics consultation with radiation oncologist and dosimetrist for plan development and review.
Consultative support of radiation oncologist including special dose measurements, calculations, etc.
Duty 6.
Responsible for administration and maintenance of all software systems including treatment planning systems, monitor unit calculation systems, and QA software including oversight of software upgrades.
Duty 7.
Performs daily, monthly and annual quality assurance testing on all linear accelerators, CT simulators and treatment planning systems in accordance with local/state/federal regulations.
Serves as point of contact for consulting on equipment downtime.
Duty 8.
Responsible for oversight of dosimetrist to include plan reviews for each patient.
Assists dosimetrist in planning as necessary and is responsible for quality assurance of each patient plan including special quality assurance for IMRT planning.
Participates in weekly chart round reviews.
Duty 9.
Performs dosimetry functions in the absence of dosimetrist Duty 10.
Present at machine for all HyperArc/SBRT/SRS/SRT, high dose treatments and any other treatments as determined by the radiation oncologists.
Duty 11.
Responsible for commissioning and maintaining of HyperArc & stereotactic machine model in treatment planning system.
Responsible for maintenance and utilization of stereotactic & HyperArc ancillary quality assurance equipment.
Serves as point of contact for all surveys related to radiation safety from regulatory bodies.
Duty 12.
Performs weekly patient chart reviews and is responsible for Maintenance of all records pertaining to patient consults and quality assurance as needed.
Duty 13.
Responsible for all physics test credentialing, planning, and oversight of RTOG protocol participation.
Initiates, implements and performs procedures if program is seeking additional treatment types, accreditations or certifications.
REQUIRED QUALIFICATIONS Master of Science degree in physics, biophysics, medical physics, radiological physics, nuclear engineering or health physics Minimum of two years of clinical experience, either through previous work experience, or clinical Radiation Oncology Residency.
Eligible for American Board of Radiology (ABR) certification at a minimum.
If not currently ABR certified, ABR certification must be obtained within 3 years of hire.
Eligible for CRE certification through the state of Ohio PHYSICAL DEMANDS This position requires a full range of body motion with intermittent walking, lifting, bending, squatting, kneeling, twisting and standing.
The associate will be required to walk for up to one hour a day, sit continuously for six hours a day and stand for one hour a day.
The individual must be able to lift twenty to fifty pounds and reach work above the shoulders.
The individual must have good eye-hand coordination and fine finger dexterity for simple grasping tasks.
The individual must have excellent verbal communication skills to perform daily tasks.
The associate must have corrected vision and hearing in the normal range.
The individual must be able to operate a motor vehicle for business travel and community involvement.
***This position is classified “at risk” for possible occupational exposure to blood borne pathogens (HBV, HIV, etc.)
Their responsibilities include planning radiation treatments, ensuring patients receive the correct dose, and directly participating in a patient's diagnosis and treatment.
Working in radiotherapy physics, the physicist will be responsible for the precision and accuracy of treatments by sing advanced computer calculations to develop individual patient treatment plans.
The physicist will use images of the cancer to outline target volume.
In addition, the physicist will ensure equipment in safe, effective, and working properly, and maintaining it at high quality standards, while performing QA and troubleshooting.
The physicist will study how radiation affects the body, researching new treatment options, and developing new safety procedures.
There are additional expectations around teaching other team members, advising on radiation safety and identifying problems, developing clinical solutions, and implementing quality management programs.
JOB DUTIES/RESPONSIBILITIES Duty 1: Responsible for maintaining and executing the Radiation Oncology Quality Assurance and Safety program (policies and procedures) for radiation therapy and provides appropriate support to staff in this regard.
Duty 2.
Implements, manages and maintains all medical physics ancillary QA equipment including preventative maintenance and routine calibrations (e.g., pt.
diodes, daily therapist QA).
Duty 3.
Coordinates with alternate physicist to ensure on site coverage of patient care during clinic hours and coverage for vacations and illness.
Maintains calendar of coverage and communicates changes at least 30 days in advance.
Available for emergency consultation when necessary.
Duty 4.
Responsible for ensuring all local/state/federal regulations and accreditation standards related to medical physics services are met Duty 5.
Consults with Radiation Oncologists, Dosimetrists, and Therapists to ensure safe and effective treatment of patients.
Responsible for initial physics consultation with radiation oncologist and dosimetrist for plan development and review.
Consultative support of radiation oncologist including special dose measurements, calculations, etc.
Duty 6.
Responsible for administration and maintenance of all software systems including treatment planning systems, monitor unit calculation systems, and QA software including oversight of software upgrades.
Duty 7.
Performs daily, monthly and annual quality assurance testing on all linear accelerators, CT simulators and treatment planning systems in accordance with local/state/federal regulations.
Serves as point of contact for consulting on equipment downtime.
Duty 8.
Responsible for oversight of dosimetrist to include plan reviews for each patient.
Assists dosimetrist in planning as necessary and is responsible for quality assurance of each patient plan including special quality assurance for IMRT planning.
Participates in weekly chart round reviews.
Duty 9.
Performs dosimetry functions in the absence of dosimetrist Duty 10.
Present at machine for all HyperArc/SBRT/SRS/SRT, high dose treatments and any other treatments as determined by the radiation oncologists.
Duty 11.
Responsible for commissioning and maintaining of HyperArc & stereotactic machine model in treatment planning system.
Responsible for maintenance and utilization of stereotactic & HyperArc ancillary quality assurance equipment.
Serves as point of contact for all surveys related to radiation safety from regulatory bodies.
Duty 12.
Performs weekly patient chart reviews and is responsible for Maintenance of all records pertaining to patient consults and quality assurance as needed.
Duty 13.
Responsible for all physics test credentialing, planning, and oversight of RTOG protocol participation.
Initiates, implements and performs procedures if program is seeking additional treatment types, accreditations or certifications.
REQUIRED QUALIFICATIONS Master of Science degree in physics, biophysics, medical physics, radiological physics, nuclear engineering or health physics Minimum of two years of clinical experience, either through previous work experience, or clinical Radiation Oncology Residency.
Eligible for American Board of Radiology (ABR) certification at a minimum.
If not currently ABR certified, ABR certification must be obtained within 3 years of hire.
Eligible for CRE certification through the state of Ohio PHYSICAL DEMANDS This position requires a full range of body motion with intermittent walking, lifting, bending, squatting, kneeling, twisting and standing.
The associate will be required to walk for up to one hour a day, sit continuously for six hours a day and stand for one hour a day.
The individual must be able to lift twenty to fifty pounds and reach work above the shoulders.
The individual must have good eye-hand coordination and fine finger dexterity for simple grasping tasks.
The individual must have excellent verbal communication skills to perform daily tasks.
The associate must have corrected vision and hearing in the normal range.
The individual must be able to operate a motor vehicle for business travel and community involvement.
***This position is classified “at risk” for possible occupational exposure to blood borne pathogens (HBV, HIV, etc.)
Not Specified
T
Radiation Oncology Medical Physicist (PRN)
🏢 The Armes Family Cancer Care Center
Salary not disclosed
PURPOSE OF THIS POSITION The physicist uses their knowledge of physics to develop and us medical radiation treatment, devices, and technologies.
Their responsibilities include planning radiation treatments, ensuring patients receive the correct dose, and directly participating in a patient's diagnosis and treatment.
Working in radiotherapy physics, the physicist will be responsible for the precision and accuracy of treatments by sing advanced computer calculations to develop individual patient treatment plans.
The physicist will use images of the cancer to outline target volume.
In addition, the physicist will ensure equipment in safe, effective, and working properly, and maintaining it at high quality standards, while performing QA and troubleshooting.
The physicist will study how radiation affects the body, researching new treatment options, and developing new safety procedures.
There are additional expectations around teaching other team members, advising on radiation safety and identifying problems, developing clinical solutions, and implementing quality management programs.
JOB DUTIES/RESPONSIBILITIES Duty 1: Responsible for maintaining and executing the Radiation Oncology Quality Assurance and Safety program (policies and procedures) for radiation therapy and provides appropriate support to staff in this regard.
Duty 2.
Implements, manages and maintains all medical physics ancillary QA equipment including preventative maintenance and routine calibrations (e.g., pt.
diodes, daily therapist QA).
Duty 3.
Coordinates with alternate physicist to ensure on site coverage of patient care during clinic hours and coverage for vacations and illness.
Maintains calendar of coverage and communicates changes at least 30 days in advance.
Available for emergency consultation when necessary.
Duty 4.
Responsible for ensuring all local/state/federal regulations and accreditation standards related to medical physics services are met Duty 5.
Consults with Radiation Oncologists, Dosimetrists, and Therapists to ensure safe and effective treatment of patients.
Responsible for initial physics consultation with radiation oncologist and dosimetrist for plan development and review.
Consultative support of radiation oncologist including special dose measurements, calculations, etc.
Duty 6.
Responsible for administration and maintenance of all software systems including treatment planning systems, monitor unit calculation systems, and QA software including oversight of software upgrades.
Duty 7.
Performs daily, monthly and annual quality assurance testing on all linear accelerators, CT simulators and treatment planning systems in accordance with local/state/federal regulations.
Serves as point of contact for consulting on equipment downtime.
Duty 8.
Responsible for oversight of dosimetrist to include plan reviews for each patient.
Assists dosimetrist in planning as necessary and is responsible for quality assurance of each patient plan including special quality assurance for IMRT planning.
Participates in weekly chart round reviews.
Duty 9.
Performs dosimetry functions in the absence of dosimetrist Duty 10.
Present at machine for all HyperArc/SBRT/SRS/SRT, high dose treatments and any other treatments as determined by the radiation oncologists.
Duty 11.
Responsible for commissioning and maintaining of HyperArc & stereotactic machine model in treatment planning system.
Responsible for maintenance and utilization of stereotactic & HyperArc ancillary quality assurance equipment.
Serves as point of contact for all surveys related to radiation safety from regulatory bodies.
Duty 12.
Performs weekly patient chart reviews and is responsible for Maintenance of all records pertaining to patient consults and quality assurance as needed.
Duty 13.
Responsible for all physics test credentialing, planning, and oversight of RTOG protocol participation.
Initiates, implements and performs procedures if program is seeking additional treatment types, accreditations or certifications.
REQUIRED QUALIFICATIONS Master of Science degree in physics, biophysics, medical physics, radiological physics, nuclear engineering or health physics Minimum of two years of clinical experience, either through previous work experience, or clinical Radiation Oncology Residency.
Eligible for American Board of Radiology (ABR) certification at a minimum.
If not currently ABR certified, ABR certification must be obtained within 3 years of hire.
Eligible for CRE certification through the state of Ohio PHYSICAL DEMANDS This position requires a full range of body motion with intermittent walking, lifting, bending, squatting, kneeling, twisting and standing.
The associate will be required to walk for up to one hour a day, sit continuously for six hours a day and stand for one hour a day.
The individual must be able to lift twenty to fifty pounds and reach work above the shoulders.
The individual must have good eye-hand coordination and fine finger dexterity for simple grasping tasks.
The individual must have excellent verbal communication skills to perform daily tasks.
The associate must have corrected vision and hearing in the normal range.
The individual must be able to operate a motor vehicle for business travel and community involvement.
***This position is classified “at risk” for possible occupational exposure to blood borne pathogens (HBV, HIV, etc.)
Their responsibilities include planning radiation treatments, ensuring patients receive the correct dose, and directly participating in a patient's diagnosis and treatment.
Working in radiotherapy physics, the physicist will be responsible for the precision and accuracy of treatments by sing advanced computer calculations to develop individual patient treatment plans.
The physicist will use images of the cancer to outline target volume.
In addition, the physicist will ensure equipment in safe, effective, and working properly, and maintaining it at high quality standards, while performing QA and troubleshooting.
The physicist will study how radiation affects the body, researching new treatment options, and developing new safety procedures.
There are additional expectations around teaching other team members, advising on radiation safety and identifying problems, developing clinical solutions, and implementing quality management programs.
JOB DUTIES/RESPONSIBILITIES Duty 1: Responsible for maintaining and executing the Radiation Oncology Quality Assurance and Safety program (policies and procedures) for radiation therapy and provides appropriate support to staff in this regard.
Duty 2.
Implements, manages and maintains all medical physics ancillary QA equipment including preventative maintenance and routine calibrations (e.g., pt.
diodes, daily therapist QA).
Duty 3.
Coordinates with alternate physicist to ensure on site coverage of patient care during clinic hours and coverage for vacations and illness.
Maintains calendar of coverage and communicates changes at least 30 days in advance.
Available for emergency consultation when necessary.
Duty 4.
Responsible for ensuring all local/state/federal regulations and accreditation standards related to medical physics services are met Duty 5.
Consults with Radiation Oncologists, Dosimetrists, and Therapists to ensure safe and effective treatment of patients.
Responsible for initial physics consultation with radiation oncologist and dosimetrist for plan development and review.
Consultative support of radiation oncologist including special dose measurements, calculations, etc.
Duty 6.
Responsible for administration and maintenance of all software systems including treatment planning systems, monitor unit calculation systems, and QA software including oversight of software upgrades.
Duty 7.
Performs daily, monthly and annual quality assurance testing on all linear accelerators, CT simulators and treatment planning systems in accordance with local/state/federal regulations.
Serves as point of contact for consulting on equipment downtime.
Duty 8.
Responsible for oversight of dosimetrist to include plan reviews for each patient.
Assists dosimetrist in planning as necessary and is responsible for quality assurance of each patient plan including special quality assurance for IMRT planning.
Participates in weekly chart round reviews.
Duty 9.
Performs dosimetry functions in the absence of dosimetrist Duty 10.
Present at machine for all HyperArc/SBRT/SRS/SRT, high dose treatments and any other treatments as determined by the radiation oncologists.
Duty 11.
Responsible for commissioning and maintaining of HyperArc & stereotactic machine model in treatment planning system.
Responsible for maintenance and utilization of stereotactic & HyperArc ancillary quality assurance equipment.
Serves as point of contact for all surveys related to radiation safety from regulatory bodies.
Duty 12.
Performs weekly patient chart reviews and is responsible for Maintenance of all records pertaining to patient consults and quality assurance as needed.
Duty 13.
Responsible for all physics test credentialing, planning, and oversight of RTOG protocol participation.
Initiates, implements and performs procedures if program is seeking additional treatment types, accreditations or certifications.
REQUIRED QUALIFICATIONS Master of Science degree in physics, biophysics, medical physics, radiological physics, nuclear engineering or health physics Minimum of two years of clinical experience, either through previous work experience, or clinical Radiation Oncology Residency.
Eligible for American Board of Radiology (ABR) certification at a minimum.
If not currently ABR certified, ABR certification must be obtained within 3 years of hire.
Eligible for CRE certification through the state of Ohio PHYSICAL DEMANDS This position requires a full range of body motion with intermittent walking, lifting, bending, squatting, kneeling, twisting and standing.
The associate will be required to walk for up to one hour a day, sit continuously for six hours a day and stand for one hour a day.
The individual must be able to lift twenty to fifty pounds and reach work above the shoulders.
The individual must have good eye-hand coordination and fine finger dexterity for simple grasping tasks.
The individual must have excellent verbal communication skills to perform daily tasks.
The associate must have corrected vision and hearing in the normal range.
The individual must be able to operate a motor vehicle for business travel and community involvement.
***This position is classified “at risk” for possible occupational exposure to blood borne pathogens (HBV, HIV, etc.)
Not Specified
N
Marketing Coordinator (A/E/C) - HYBRID
✦ New
Salary not disclosed
NOVA Engineering and Environmental is seeking a Marketing Coordinator with a focus on graphic design and social media to support our offices across the Southeast. This is an excellent opportunity for a candidate with a few years of experience or a recent graduate looking to grow within A/E/C marketing. The role blends traditional proposal and marketing support with hands-on graphic design, brand support, and social media execution. The position reports to the Marketing Supervisor and works closely with marketing, business development, and technical teams.
Essential Functions:
The successful candidate will work closely with the various Business Development Associates, Operational Managers and senior staff throughout the company. Primary job responsibilities will include the following:
Marketing & Proposal Support:
- Coordinate and manage the end to end proposal development process, from go/no go through final submission
- Assist with the coordination, development, editing, and production of SOQs, presentations, SF330’s and more using Adobe InDesign and Microsoft Office365
- Support proposal strategy sessions and assist with presentation development and production
- Write, edit, and format proposal content, resumes, project descriptions, and boilerplate content using Deltek CRM, Microsoft Office, and Adobe tools
- Maintain proposal content libraries, resumes, project sheets, and boilerplate materials
- Support proposal close out activities, debriefs, and process improvements
- Assist with market research to help offices identify trends, clients, and competitors
- Support regional marketing and business development meetings as needed
Graphic Design & Brand Support:
- Produce and update marketing graphics for proposals, presentations, and collateral in accordance with NOVA brand standards
- Assist with maintaining and growing NOVA’s internal graphics and template library
- Support the development of regional marketing collateral including brochures, flyers, conference displays, and digital assets
- Ensure consistency with corporate branding across all marketing materials
Social Media & Digital Marketing:
- Assist with NOVA’s social media program to support brand awareness, recruiting, and community engagement
- Create and schedule social media content, including graphics and short-form copy, in coordination with the marketing team
- Help track engagement metrics and support reporting on social media performance
Systems & Administration:
- Support the Client, Project, and Employee Database (Deltek Vision/Vantagepoint)
- Assist with tracking business opportunities and leads in the CRM
- Help coordinate the renewal of annual contracts and pre-qualification certifications
Minimum Qualifications, Experience and Education:
- Minimum 2 years of marketing experience or equivalent (A/E/C industry preferred)
- Proficient in Microsoft (Word, Excel, PowerPoint and Power BI) and Adobe (InDesign, Photoshop and Acrobat), as well as experience in database management
- Excellent oral and written communication skills
- High attention to detail and strong quality control skills
- Ability to manage multiple deadlines in a fast paced, deadline driven environment
- Familiarity with Deltek Vantagepoint Applications, including Deltek Vantagepoint’s CRM Software a plus
- Motivated self-starter with ability to problem solve
- Ability to work under pressure with multiple tasks and deadlines
- Ability to travel between offices on occasion
NOVA is an Equal Opportunity Employer. All qualified candidates are encouraged to apply. NOVA does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, disability, national origin, ancestry, marital status, veteran status or any other characteristic protected by law.
About Nova:
Established in 1996, NOVA was originally founded to provide Environmental Consulting, Geotechnical Engineering, and Construction Materials Testing and Inspection services to the design and construction community, largely in the southeastern United States. Since our founding, NOVA has added additional service lines such as Facilities and Building Envelope, Forensics, Municipal and more. We are dedicated to providing a wide variety of projects and services with an emphasis on collaboration and safety. We offer a stimulating and inspiring work environment where our employees are recognized for their efforts and achievements and are mentored for professional growth.
Currently, NOVA employs 650+ personnel in 18 offices serving clients throughout the southeastern United States and beyond. Our firm has professional and administrative support staff that includes registered professional engineers, registered professional geologists, environmental scientists, registered roof observers, LEED accredited professionals, soil/foundation engineers, laboratory specialists, materials technicians, ICC-certified inspectors, NICET-certified technicians, and AWS-certified welding inspectors. NOVA’s facilities include AASHTO-accredited laboratories in soils, concrete, aggregate and hot-mix asphalt testing/inspection. We also have CCRL-inspected laboratories for concrete sampling, curing, and testing. NOVA will continue to expand its reach and reputation as a leader in the testing, inspection, and consulting fields with a strong legacy of quality and integrity by promoting our best internal resources and recruiting a diverse culture of valued and exceptional talent.
Remote working/work at home options are available for this role.
Not Specified
Principal Mechanical Design Engineer - Data Center Infrastructure (REMOTE) - Work from anywhere with rare travel demands (AUSTIN)
Salary not disclosed
Job Title: Principal Mechanical Integration Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
temporary
Senior Mechanical Systems Engineer – Infrastructure Design (Remote) (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Design Engineer - Data Center Infrastructure (REMOTE) (WASHINGTON)
✦ New 🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Integration Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Design Engineer - Data Center Infrastructure (REMOTE) (AUSTIN)
✦ New 🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Integration Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
temporary
jobs by
✓ All jobs loaded