Engineering Structures Jobs in Farmers Branch
185 positions found — Page 7
Responsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.
Third Shift: Monday - Friday 11:00 p.m. - 7:00 a.m.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Diagnose and repair to basic powered functional test failures (power, traffic, network issues) to a component level on electronic circuit board assemblies while maintaining minimal quantities of Engineering and Component hold assemblies.
· Exhibit proficiency in the use of electronic test and measurement equipment.
· Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM’s, EC documents, Visuals, Debug, Testing tools and procedures.
· Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.
· Understand, recognize and execute Jabil production requirements, rules, policies and procedures.
· Work as a team member to achieve Diagnostic department’s process yield goals.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Delta, founded in 1971, is a global leader in switching power supplies and thermal management products with a thriving portfolio of smart energy-saving systems and solutions in the fields of industrial automation, building automation, telecom power, data center infrastructure, EV charging, renewable energy, energy storage and display, to nurture the development of smart manufacturing and sustainable cities. As a world-class corporate citizen guided by its mission statement, “To provide innovative, clean and energy-efficient solutions for a better tomorrow,” Delta leverages its core competence in high-efficiency power electronics and its ESG-embedded business model to address key environmental issues, such as climate change. Delta serves customers through its sales offices, R&D centers and manufacturing facilities spread over close to 200 locations across five continents. Delta has 158 sales offices, 72 R&D centers and 48 manufacturing facilities worldwide.
Throughout its history, Delta has received various global awards and recognition for its business achievements, innovative technologies, and dedication to ESG. Since 2011, Delta has been listed on the DJSI World Index of Dow Jones Sustainability™ Indices for 11 consecutive years. In 2021, Delta was also recognized by CDP with leadership level ratings for its substantial contribution to climate change and water security issues and named Supplier Engagement Leader for its continuous development of a sustainable value chain.
Job Title: Technical Project Manager – Data Center Power/Thermal
Location: Plano, Department: Data Center SBP
We are looking for a skilled Technical Project Manager – Data Center Power/Thermal to lead power and cooling infrastructure projects, providing technical oversight, managing cross-functional teams, and ensuring project success from inception to completion.
Key Responsibilities:
- Project Leadership & Execution: Plan, manage, and oversee power/thermal infrastructure projects from inception to completion, ensuring timely delivery and quality standards are met.
- Technical Oversight: Apply expertise in power supply, power distribution, and thermal management to guide technical decisions, validate designs, and optimize system performance.
- Stakeholder Management: Serve as primary technical contact person for strategic customers and internal teams. Coordinate with sales, engineering, and service teams to drive project success.
- Site Management & Quality: Conduct site evaluations, oversee installation quality, and ensure compliance with specifications and standards. Position requires up to 30% travel.
- Financial Management: Develop and control project budgets, track expenses, maintain target margins, and implement risk mitigation strategies to ensure project success.
- Vendor Coordination: Build and manage supplier relationships, evaluate proposals, and optimize procurement strategies to enhance project efficiency and value.
- Project Controls: Maintain comprehensive project documentation, oversee technical submittals, and provide regular updates on project performance and financial metrics.
Required Qualifications:
- Education: Bachelor's degree in Mechanical or Electrical Engineering (or equivalent experience)
- Experience: 5 years or more managing power infrastructure or mission-critical facility projects
- Technical Knowledge: Demonstrated experience with:
- Power supply and power distribution
- Cooling systems and thermal management
- Energy efficiency optimization
- Data center operations
- Tools: MS Office Suite and proficiency in project management software (Procore, MS Project, Jira, or similar)
- Leadership: Proven ability to manage cross-functional teams and engage diverse stakeholders
- Skills: Strong analytical and problem-solving capabilities with ability to adapt to changing priorities
Preferred Qualifications:
- Experience in supporting colocation, hyperscale, enterprise data center business
- Professional Certifications: PMC, PE, DCEP, or ATD
- Knowledge: Familiarity with New Product Introduction (NPI) processes
Salary is within 120-150k along with Bonus
Our client is seeking a Product Manager Associate to support key initiatives within their banking products team. This role will focus on building and enhancing product capabilities while supporting the ongoing Apple Card transition. The ideal candidate will bring strong product management experience, a data-driven mindset, and familiarity with consumer banking products such as savings and checking accounts.
Key Responsibilities:
- Partner with Engineering, Legal, and Compliance teams to design and implement new product features.
- Lead Agile product development processes, including backlog grooming, sprint planning, and user story development.
- Gather and analyze stakeholder feedback to inform product enhancements and prioritization.
- Track and monitor key performance metrics and outcomes to measure product success.
- Develop and maintain control frameworks, processes, and procedures for owned product areas.
- Support projects focused on automation of large data sets and operational processes, including customer outreach initiatives.
- Collaborate cross-functionally to ensure product initiatives are delivered successfully from concept through launch.
Required Qualifications:
- Prior Product Management experience delivering initiatives from planning through launch.
- Strong ability to collaborate with cross-functional stakeholders across engineering, legal, and compliance teams.
- Experience working with data and analytics to drive product decisions.
Preferred Qualifications:
- Background working with consumer banking products, such as savings accounts, checking accounts, or transfers.
- Experience supporting financial services or fintech products.
- Familiarity with Agile product development environments.
*This role is 80% Remote*
Optomi, in partnership with a leader in the Commercial Real Estate and Investments industry, is looking for a Product Manager with 3-5 years experience being user-focused!
The Product Manager will be responsible for driving user-focused product development for a new platform aimed at valuation professionals. This role involves replacing a legacy application and working with AI to enhance workflows, data integrations, and report writing. The successful candidate will have a strong understanding of user needs, adept at translating feedback into actionable user stories, and will collaborate across UX, engineering, and business teams to deliver impactful solutions.
What the right candidate will enjoy:
- Collaborative work environment with opportunities to challenge ideas
- Involvement in cutting-edge AI initiatives
- Potential to grow into senior roles
What type of experience does the right candidate have:
- 3-5 years as a 'pure product manager'
- Strong user advocacy and customer interaction skills
- Ability to understand user needs and pain points.
- Experience with Azure DevOps for backlogs and Power BI for dashboards.
- Experience with Agile methodologies
What the responsibilities are of the right candidate:
- Engage with users to identify needs and pain points
- Use data systematically to uncover opportunities and track product performance
- Collaborate with UX, engineering, and business teams to deliver AI-first capabilities
- Lead Agile ceremonies and manage product backlog
- Deliver measurable, incremental value to users and the business
RAN Wireless SME- Onsite- Plano Texas
No C2C, only w2 candidates
We are looking for a RAN Wireless SME with deep expertise in 4G/5G technologies to support product development, system design, and customer-facing technical engagements. This is a high-impact role working closely with OEM teams and carriers to drive next-gen wireless solutions.
Key Responsibilities
- Translate customer requirements into system and feature requirements
- Perform 4G/5G protocol analysis and troubleshooting (Lab & Field – IODT focus)
- Lead performance analysis, feature validation, and new technology introduction (virtualized networks)
- Support pre-sales activities with technical solutions and customer presentations
- Collaborate with cross-functional teams (HQ, logistics, engineering) for product rollouts
- Conduct deep-dive sessions with customers and provide technical guidance
Must-Have Skills
- 12+ years of wireless telecom experience
- Strong expertise in RAN (4G LTE & 5G NR) and call processing
- Deep understanding of 3GPP protocols (PHY, MAC, RLC, RRC, PDCP)
- Experience with IODT testing, log analysis, and troubleshooting
- Hands-on with tools like QXDM, XCAL, Wireshark, Channel Emulator
- Knowledge of Massive MIMO, Beamforming, LTE-NR interworking
- Strong communication skills for customer-facing engagements
Nice to Have
- Experience with 3GPP Rel-15/16
- Exposure to SW/HW architecture
- System engineering background (feature design, test strategy)
- Prior experience working with OEMs or carriers
What you didn’t know about us:
- Competitive salary
- Health, Dental and Vision Benefits
- Long-Term growth potential
- 401k
- With this position, you will get the opportunity to work with a game-changing client and further advance your already valuable experience in the telecom industry!
We are Connectors. We thrive on ‘quality over quantity’ and put in the work building strong relationships. We create connections, discover qualities, uncover skills, and place people with accuracy. We are your true partner!
We are Collaborators. You’ll be working with a wholly owned subsidiary of Kelly and part of the Kelly Telecom division. It allows us to be as nimble and fiercely competitive as a startup while having the backing of a multibillion dollar publicly traded company which has been in business for 75 years. With direct access to hiring managers, services don’t stop at standard recruiting processes. We use our expertise to improve your application skills and provide ongoing career support.
We give 24/7 Support. We are in this together. We provide around the clock availability, competitive employee benefits, and continuously check-in to make sure things are going smoothly. Check out our Glassdoor page!
Who We Are:
Delta, founded in 1971, is a global leader in switching power supplies and thermal management products with a thriving portfolio of smart energy-saving systems and solutions in the fields of industrial automation, building automation, telecom power, data center infrastructure, EV charging, renewable energy, energy storage and display, to nurture the development of smart manufacturing and sustainable cities. As a world-class corporate citizen guided by its mission statement, “To provide innovative, clean and energy-efficient solutions for a better tomorrow,” Delta leverages its core competence in high-efficiency power electronics and its ESG-embedded business model to address key environmental issues, such as climate change. Delta serves customers through its sales offices, R&D centers and manufacturing facilities spread over close to 200 locations across five continents. Delta has 158 sales offices, 72 R&D centers and 48 manufacturing facilities worldwide.
Throughout its history, Delta has received various global awards and recognition for its business achievements, innovative technologies, and dedication to ESG. Since 2011, Delta has been listed on the DJSI World Index of Dow Jones Sustainability™ Indices for 11 consecutive years. In 2021, Delta was also recognized by CDP with leadership level ratings for its substantial contribution to climate change and water security issues and named Supplier Engagement Leader for its continuous development of a sustainable value chain.
What you would be doing:
Ensures manufacturing and assembly processes/procedures utilized by Contract Manufacturers meet product quality and reliability requirements.
Tracks ongoing quality and yield performance to drive improvement activities.
Evaluates new product designs for manufacturability.
Assists Contract Manufacturers with problem identification, root cause analysis, and corrective action identification, verification, and implementation.
Implements quality plans for rapidly transitioning products into manufacture.
Determines acceptability of product from subcontractors and internal operations.
Supports quality system development and implementation to applicable codes and standards such as ISO9001, etc.
Performs, documents and track results of internal audits.
Generates, evaluates and tracks corrective action requests.
Inspects and evaluates material and product quality according to internal process and procedures.
Assists in training of company personnel.
Interfaces with customers for quality activities
.
What we require (Skills and Background):
- Bachelor’s degree in engineering, Electronics or related discipline or equivalent desired
- Four to six years of previous quality assurance experience in the electronics or power industry required.
- Previous experience working with an ISO-9001 quality assurance program required
- Automotive background experience (IATF 16949 Automotive Quality Management System in particular) to support EV business.
- Core Quality and Engineering Tools (QMS, PPAP, APQP, FMEA, SPC, MSA, QCP, PMP)
- Quality metrics and driving metrics improvement (Yield, Cpk, GR&R, Scrap, MRB, DPPM
- Knowledge of statistical techniques and demonstrated ability to review and approve test plans, qualification reports, drawings, documents
- Quality Control Analysis; conducting tests and inspections of products, services, or processes to evaluate quality or performance.
- Monitoring/ Assessing performance of yourself, other individuals, or organizations to make improvements or take corrective action.
- Demonstrated advance proficiency with computer software to include MS Office (Word and Excel) and e-mail
Desired Skills:
Auditor or Lead Auditor Certification or Certified Quality Engineer is preferred.
ISO14001:2015 Environmental Management Systems, ISO 45001 Health, and Safety Management is a plus.
Delta SQMS (Smart Quality Management System) experience
Smart IQC
MES (Manufacturing Execution System)
What you will experience at Delta:
You will be joining one of the world’s leaders in technology as they grow their presences in North America. This role offers a competitive salary package, comprehensive benefits, and the opportunity to work with a dynamic team in a fast-paced and innovative environment. If you are a self-starter with a passion for technology and a commitment to customer satisfaction, this is the job for you.
One of the leading providers of best-in-class information technology services and solutions is looking for a Sr. Business Analyst to join their Hybrid team in Plano, TX!
Our client is seeking a Senior Business Analyst to support North America Professional Services business process analysis and transformation efforts. In this role, you will partner closely with senior leaders to gather and organize existing process documentation, map current-state workflows, identify operational pain points, and translate stakeholder input into clear, structured materials that support enterprise transformation initiatives. The ideal candidate is a strong process-focused Business Analyst who can work through ambiguity, bring structure to complex operational processes, and help document actionable insights that support decision-making and future process improvements.
Contract Duration: 6-Month Contract with the opportunity for extension or conversion
Required Skills & Experience
- 5+ years of experience working as a Business Analyst, Senior Business Analyst, or Business Process Analyst
- Strong experience with business process documentation, process mapping, and workflow analysis
- Experience gathering business requirements and conducting stakeholder interviews and workshops
- Ability to work in ambiguous environments and create structured documentation and clear outputs
- Experience supporting large-scale transformation initiatives, enterprise platform changes, or operational improvement programs
- Strong written communication skills with the ability to synthesize complex discussions into clear business documentation
- Experience maintaining requirements logs, decision logs, issue trackers, and business analysis artifacts
What You Will Be Doing
Daily Responsibilities
- Partner directly with leadership to support Professional Services business process analysis and transformation activities
- Gather and review existing process documentation, SOPs, work instructions, and business rules across multiple teams
- Conduct stakeholder interviews and working sessions to document how processes are currently performed
- Build current-state process maps, workflows, and supporting documentation across key business functions
- Identify and document pain points, inefficiencies, risks, and improvement opportunities within operational processes
- Translate stakeholder input into structured business requirements and supporting documentation
- Maintain key artifacts including requirements logs, issue trackers, assumptions, and decision logs
- Prepare summaries, reports, and briefing materials to support leadership in program discussions and decision making
- Track open issues, action items, and decisions to ensure alignment across stakeholders
You will receive the following benefits:
- Medical Insurance - Four medical plans to choose from for you and your family
- Dental & Orthodontia Benefits
- Vision Benefits
- Health Savings Account (HSA)
- Health and Dependent Care Flexible Spending Accounts
- Voluntary Life Insurance, Long-Term & Short-Term Disability Insurance
- Hospital Indemnity Insurance
- 401(k) including match with pre and post-tax options
- Paid Sick Time Leave
- Legal and Identity Protection Plans
- Pre-tax Commuter Benefit
- 529 College Saver Plan
Motion Recruitment Partners (MRP) is an Equal Opportunity Employer. All applicants must be currently authorized to work on a full-time basis in the country for which they are applying, and no sponsorship is currently available. Employment is subject to the successful completion of a pre-employment screening. Accommodation will be provided in all parts of the hiring process as required under MRP’s Employment Accommodation policy. Applicants need to make their needs known in advance.
Job Description
Build Your Book. Keep Your Commissions. Grow With a Proven Agency.
We are an established, growth-focused insurance agency operating since 2009, offering a full suite of Property & Casualty products. As we continue expanding, we are focused on growing our personal lines and contractor general liability divisions. Our agency provides strong carrier access, operational support, and a collaborative environment for producers who want to build and scale their book of business.
We are seeking experienced, licensed insurance sales agents who want more ownership, higher earning potential, and long-term renewal income.
If you're tired of capped commissions and want to control your income, this is your opportunity.
Compensation Structure
* 60-80% commission on new business (based on performance/volume)
* 50% commission on renewal business
* 1099 independent contractor structure
* Unlimited earning potential
This role is ideal for producers who want residual income and ownership over their production.
Work Structure
First 90 days: In-office (to integrate, train, and build momentum)
After 90 days: Remote opportunity based on performance Company Description
Since 2009, our agency has grown into a well-established insurance operation offering a full suite of Property & Casualty products. We provide access to multiple carriers and are actively expanding our personal lines and contractor general liability divisions to better serve a diverse client base.
We are a performance-driven organization that values ownership, accountability, and long-term client relationships. Our producers have the opportunity to build and grow their own book of business while being backed by an experienced team and established market presence.
Our culture is built around discipline, professionalism, and results — making us an ideal home for motivated insurance agents who want control over their income and long-term renewal growth.
Company Description
Since 2009, our agency has grown into a well-established insurance operation offering a full suite of Property & Casualty products. We provide access to multiple carriers and are actively expanding our personal lines and contractor general liability divisions to better serve a diverse client base.\r
\r
We are a performance-driven organization that values ownership, accountability, and long-term client relationships. Our producers have the opportunity to build and grow their own book of business while being backed by an experienced team and established market presence.\r
\r
Our culture is built around discipline, professionalism, and results — making us an ideal home for motivated insurance agents who want control over their income and long-term renewal growth.
Job Description
Job description:
Trowell & Turner is a family-owned shop operating in Dallas, Texas for 75+ years
We are seeking an Automotive Technician with extensive vehicle diagnostic and repair skills. In this role, you will diagnose a wide range of issues and make repairs to engines, suspensions, and electronic systems. Our customers drive many different kinds of cars and trucks, so you must be comfortable working on a variety of makes and models.
Requirements and Qualifications
* Auto technician or mechanic experience (5-5 years)
* Valid driver's license
* ASE certification is a plus
Job Type: Full-time
Benefits:
* Employee discount
* Health insurance
* Professional development assistance
Work Location: In person
We have headquarteerd in Bloomfiled Hills, MI and have 16 offices spread across six countries.
We partner with Fortune 500 companies to address complex business challenges.
Our services span AI, IT staffing, cloud computing, engineering, mobility, testing, and more.
Certified with CMMI Level 3 and ISO standards, V2Soft is committed to quality and security.
Beyond our work, we actively support local communities and non-profits, reflecting our core values.
Join us to be part of a dynamic and impactful global company! Please visit us at to know more .
Must Have Skills: Experience working between a Product Owner or Product Manager and Development staff Expert-level Figma Prototyping User Experience Previous Banking/investment/financial institution Nice to Have Skills: FigJam Maze
- or similar user research tool Capable of moving seamlessly between iterative prototyping and enterprise application development and support.
Education: Bachelors preferred.
V2Soft is an Equal Opportunity Employer ( EOE).
We welcome applicants from all backgrounds, including individuals with disabilities and veterans.
to view all of our open opportunities and to learn more about our benefits.
