Engineering Structures Jobs in Dania, FL

SENIOR CIVIL ENGINEER (LAND DEVELOPMENT)

JOB SUMMARY

The Land Development Engineer is responsible for supporting the planning, design, and coordination of site development projects from initial due diligence through permitting and construction planning. This role includes conducting zoning and site feasibility reviews, preparing concept and site plan drawings, and designing stormwater management, grading, erosion control, and utility systems. The engineer also performs hydrology calculations, develops construction cost estimates, prepares technical reports and correspondence, and coordinates with clients, agencies, attorneys, and project teams to ensure successful project approvals and implementation.

COMPANY

For over 20 years, the company has served clients across Florida by providing high-quality civil engineering, surveying, planning, landscape architecture, project management, and related site design services. As a multi-disciplinary consulting engineering firm with licensed professionals, the company operates three offices throughout the state (Ft. Lauderdale, Stuart, Tampa) and is committed to delivering exceptional quality and dedicated client service for both commercial and residential projects.

ESSENTIAL DUTIES

• Zoning reviews – Review of municipal zoning and land development ordinances and applicable agency regulations to determine land development limitations for the property.
• Site Investigation & Due Diligence –Review of ordinances, utility service research, outside agency regulations and site visits to establish comprehensive development guidelines.
• Preparation of Concept Drawings – Preparation of concept plan based upon client's development objectives and conclusions of due diligence.
• Design of Stormwater Management & Stormwater Conveyance Systems – Design includes use of AutoCAD/LDD and Hydrology design software. Skills should include preparation of pipe sizing calculations for stormwater conveyance systems including drainage area maps, surface runoff coefficients, invert, slope, velocity & hydraulic grade line evaluation using the Rational Method & Manning's Equation.
• Grading Design –Value engineering through earthwork analysis and site safety via appropriate design slopes.
• Design of Utility Systems – Design including stormwater conveyance, sanitary sewer service, pump station design, water, gas, telephone service, etc. Also involves determination and resolution of vertical and horizontal utility conflicts that may exist.
• Soil Erosion & Sediment Control Design – Design includes stability calculations, best management practices, swale design, spillway design, and determination of construction sequence.
• Preparation of Written Correspondence – Communicate with outside agencies, client, attorney, contractor, etc. Also includes preparation of technical reports including drainage, sanitary sewer and site investigation reports.
• Preparation of Construction Cost Estimates - Based on site plan drawings
• Project Coordination - Includes conferring with client, attorney, and project team with the purpose of preparing a comprehensive site plan application

EDUCATION & EXPERIENCE

• Education: Bachelor's or Master's Degree in a position relevant Engineering field from an ABET-accredited school.

• Experience: Minimum of five (5) years' job-related experience

• Licensure/Certification: Professional Engineer (PE) required.

PREFERRED QUALIFICATIONS

• Demonstrates a strong desire to expand knowledge and take on new responsibilities within the engineering field.

• Proficient in AutoCAD/LDD to be used for Site Layout, Grading, Utility, and Storm Water Management Plan design and/or other discipline-specific programs preferred.

• Proficient in Microsoft Office Suite (Excel, Word, Power Point, Outlook).

• Excellent organizational and time management skills to handle multiple tasks and meet project deadlines effectively.

• Strong oral and written communication skills, with the ability to work independently as well as collaboratively within a project team.

• Exhibits strong critical thinking and problem-solving skills, with a commitment to technical excellence and innovation.

Equal Opportunity Employer/Drug and Alcohol-Free Workplace. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status, such as race, religion, color, national origin, sex, sexual orientation, gender.

The Building Engineer reports to the Lead Engineer and maintains a working relationship with and takes direction from all Property Managers in his/her area for issues affecting their properties. Issues may range from tenant improvement work to preventive maintenance and repair of all building systems. This must be done in a manner that not only protects, but also maximizes the value of the property. The Building Engineer must exhibit outstanding client service and professionalism in all interactions with tenants and RMR staff. Teamwork and collaboration are critical to this position's success. The portfolio currently consists of a large single tenant office building and a small mixed-use office building.

• Operate, maintain, and log all HVAC and MEP equipment under the direction of their supervisor.
• Complete tenant service requests, and develop and maintain positive tenant relations through prompt, courteous response to tenant requests.
• Perform preventive maintenance and repairs on HVAC equipment, plumbing and electrical systems, as directed by their supervisor. Duties include, but are not limited to changing filters, coil cleaning, greasing motors, replacing light bulbs & ballasts, inspecting/adjusting belts, and regular inspections of equipment
• Maintain computerized or manual equipment logs that detail preventive work performed.
• Clean and paint equipment and surrounding areas relating to equipment and equipment rooms.
• Assist in ordering stock and inventory of parts and supplies, as needed.
• Respond immediately to emergency situations and customer concerns.
• Review elevator maintenance records and confirm elevator maintenance is performed per national agreement. Inspect condition of elevator machine rooms. Report any elevator deficiencies to their supervisor.
• Assist with review of tenant improvement plans. Inspect active construction areas and confirm contractors are following all building rules and regulations.Coordinate fire alarm and sprinkler shutdown and drain downs with contractors as needed.
• Coordinate all quarterly fire alarm testing and maintenance with building vendor.
• Maintain and operate life safety/fire systems
• Perform carpentry and snow removal, if necessary.
• Take meter readings on all meters and equipment as directed by their supervisor.
• Perform minor repairs on doors, hardware, lock, windows, ceilings, and floors
• Troubleshoot, evaluate and make recommendations to upgrade maintenance operations and/or implement savings opportunities.
• Possess competent knowledge of the use and care of tools and equipment used in facility and ground maintenance.
• Inspect buildings, grounds and equipment for unsafe or malfunctioning conditions and report to management
• Inspect new installation for compliance with building codes and safety regulations
• Comply with all applicable codes, regulations, governmental agency and company directives, as related to building operations and practice safe work habits
• Daily communication with property management, engineering staff, security, tenants and contractors/vendors is vital.

General Maintenance and Operation Duties:

• Understand OSHA guidelines and how to ensure that all equipment is maintained to guidelines/standards.
• Read and follow written and oral instructions.
• Convey thoughts and recommendations orally and/or in writing to supervisors, contractors and others in order to resolve building-related problems.
• Operate and use necessary manual and power-driven tools.

• High school diploma or GED equivalent required.
• Minimum 3-5 years of building maintenance experience or commensurate experience in a trade (plumbing, electrical, HVAC).
• HVAC or electrical technical school training preferred.
• Applicable military experience or other related operations experience will be considered including power plants, multi-family, hotels, hospitals, facilities, etc.
• Experience with automated building management systems
• Ability to interpret mechanical, electrical blueprints and schematics
• Ability to work in a fast-paced environment, with the ability to multi-task and meet deadlines.
• Must be team oriented and a problem solver.
• Strong verbal and written communication skills.
• Manage own time on a daily basis with little supervision
• Must be able to handle multiple projects, changing priorities, and continually heavy workloads
• May be required to work extended periods of time without relief, when responding to priority/emergency situations (including overtime-type assignments)
• Stooping, standing, climbing and frequent lifting of a minimum of 50 lbs. of equipment (pump, tools, ladders) and ability to safely install rigging/lifting device
• Lift and carry objects of up to 50 lbs. for distances of up to 30 feet
• Climb ladders and stairs.
• Maintain professional appearance and manner at all times while in the complex.
• Will be required to perform off site duties through the use of a personal vehicle.
• Must have a valid driver's license.
• If, at any time, security clearance is required for your job (e.g. you are assigned to work at a property leased by the Federal government), being awarded such clearance will be a condition of your employment.

The RMR Group offers an extensive total rewards package to ensure that your benefits align with your needs. Employees who work at least 21 hours per week are eligible to participate in The RMR Group's benefits plans, including:

• Health Insurance
• Dental Insurance
• Vision Insurance
• Life & Disability Insurance
• Health Savings Account (HSA) & Flexible Spending Plans (FSA)
• 401(k) Plan with Employer Match
• Holidays, Vacation & Sick Time
• Parental Leave
• Tuition Assistance
• Matching Gift Program
• Wide Array of Voluntary, Employee-Paid Benefits to choose from including Critical Illness & Accident Insurance, Identity Theft Protection & Pet Insurance

The RMR Group (Nasdaq: RMR) is a leading U.S. alternative asset management company, unique for its focus on commercial real estate (CRE) and related businesses. RMR's vertical integration is strengthened by nearly 900 real estate professionals in more than 30 offices nationwide who manage approximately $40 billion in assets under management and leverage more than 35 years of institutional experience in buying, selling, financing and operating CRE. RMR benefits from a scalable platform, a deep and experienced management team and a diversity of real estate strategies across its clients. RMR has been recognized by The Boston Globe as a "Top Place to Work", by the Environmental Protection Agency (EPA) as an "ENERGY STAR Partner of the Year" and ranked by the Building Owners and Managers Association (BOMA) as having one of the highest number of BOMA 360 designated properties in its portfolio. RMR is headquartered in Newton, MA and was founded in 1986.

RMR's mission is to create long term value for our clients by managing their investments and assets "like we own it" - an approach that consistently and repeatedly generates opportunities for all our employees, investors and stakeholders. We are guided by six core values:

• Integrity at Our Core.
• Perform Passionately and Effectively.
• Inspired Thinking.
• Like We Own It.
• Power of We.
• Mutual Respect.

Visit our website to learn more about what makes The RMR Group a rewarding place to build a career.

Follow RMR on LinkedIn and Instagram @thermrgroup.

The RMR Group is an equal opportunity employer. Qualified applications will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. For our EEO Policy Statement, please click here. If you'd like more information on your EEO rights under the law, please click here.

A Senior Test Engineer job in Miramar, FL 33027 is currently available through Belcan at one of our key aerospace clients. This is a four‑month contract role with the potential to convert to a direct hire. To be considered for this role the candidate will need to have 3-5 years of relevant experience.

Description

The Test Design Engineer is responsible for creating and performing test automation activities consistent with the test lead and test development goals/objectives. This role requires knowledge/experience with automated test software, manufacturing test environment and the ability to interpret test requirements, implement requirement-based test methodologies and trouble shoot & debug test and product issues. Experience with FAA Part 145 in an MRO environment highly desired.

Job Duties:

Specific duties will include:

SW/HW debug, troubleshoot, upgrade and maintain product automated test equipment.

Requirements Analysis/Review for test-ability

Test procedure development, implementation, execution and failure root cause analysis.

Test planning and preparation.

Assess System performance against requirements

Develop code in Veristand, Teststand, LabVIEW to implement test GUIs, drivers and test requirements.

Perform verification and validation testing on developed Automated Test Equipment (ATE).

Perform sub-system testing from bench level CCA functional testing to system level burn in testing against an ATP/QTP.

Develop and refine system and board level test cases and procedures.

Trouble shoot subsystem and system level failures to root cause.

Design test fixtures & cables to enable testing.

Perform verification and validation testing on developed Automated Test Equipment (ATE).

Bench test CCAs and test electronic sub-assemblies and rack based test systems (instruments, cables and interfaces).

Trouble shoot subsystem and system level failures to root cause.

Gather, configure and use appropriate test equipment to perform task - Power supplies, DVM, Oscilloscope, electronic loads, custom cables, etc.

Interpret test requirements and electrical test results.

Read electrical schematics.

Test planning, preparation & execution

Required Qualifications:

3 to 5 years of experience

Strong interpersonal skills

Strong analytical skills

B.S. or M.S. in Electrical Engineering, Electrical Engineering Technology, or related discipline desired

Will consider equivalent years of relevant experience in lieu of a formal degree

Experience working with or developing Automated Test Equipment (ATE).

Experience in hardware and test equipment troubleshooting experience.

Knowledge of test automation (HIL) using National Instruments Labview, TestStand and Veristand

Can operate independently

Desired Skills:

Excellent verbal and written communication skills.

Experience working independently and in a collaborative environment

Ability to react to project adjustments and alterations promptly and efficiently

Ability to effectively prioritize and execute tasks in a high-pressure environment

Familiarity with electronic components and common electronic test equipment.

Experienced using lab test equipment, power supplies, DVM, Oscilloscope, electronic loads

Ability to interpret test requirements and electrical test results.

Ability to conduct detailed failure analysis and develop and implement root cause corrective actions.

Experience with GIT, Tortoise SVN, or equivalent software configuration management tools

Previous experience with CAN, UDS, RS232, RS422 & 1553 communication protocols.

Previous experience with programming languages such as C, C++ & C#.

Previous experience with Visual Studio.

Compensation:

This position is offering an salary rate of $52.88 - $62.50/hr, however, Belcan considers several factors when extending an offer, including but not limited to education, experience, geographic location, and discipline. Benefits offered may include health care, dental, vision, life insurance; 401(k); education assistance; paid time off including PTO, holidays, and any other paid leave required by law.

Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, color, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws.

Propy is revolutionizing the real estate industry by building the world's first AI-powered Title and Escrow platform onchain. We have processed over $5B in transactions, and we are on a mission to make closing on a home as easy as buying a stock.

We combine blockchain for security with advanced AI to automate the heavy lifting of closing documents. We aren't just "using" AI; we are building the infrastructure that allows AI agents to securely manage escrow, eliminate fraud, and run 24/7.

We are looking for a pragmatic Applied AI Engineer to join our engineering team.

The role is not about training models and does not involve academic Machine Learning research. It is about building the rails that make AI usable in a high-stakes financial environment. You will bridge the gap between our robust C#/.NET architecture and the probabilistic world of LLMs.

Title and Escrow is a document-heavy industry with zero room for error. Your mission is to use AI to clean up the messiness of real-world real estate data.

You will solve problems like:

• Structured Data Extraction: Converting messy, unstructured data (like emails, PDFs, documents)  from various sources into strictly validated JSON schemas with as close to 100% accuracy as possible.
• Escrow Automation: Designing workflows that reduce human intervention by 50% by intelligently routing tasks based on AI analysis.
• Fraud Detection: Implementing deterministic logic checks on bank and financial documents to detect fraud patterns before they happen.

• Engineer the Integration: Writing production-grade code that interacts with external AI APIs
• "Prompt Engineering" as Code: You won't just write prompts; you will version, test, and optimize them. You will define strict schemas to ensure the AI speaks the language of our internal tools.
• Orchestrate & Validate: Help in building the logic that parses AI responses, validates them against our database (MongoDB), and flags inconsistencies before they reach the user.
• Full-Stack Implementation: Work to visualize AI-aided services and data for user review and approval.
• Collaborate: Work closely with the other senior engineers and product owners to translate complex "Title & Escrow" schemas into technical constraints that an AI can understand.

• Developer DNA: You are a software engineer first. You have strong experience in Python (C# / .NET is an advantage) and understand programming in depth. 
• Applied AI Experience: You have integrated LLMs into applications via API. Have experience with not only models but also AI frameworks. Experience with workflows, AI agent building and orchestration. You understand context windows, token limits, temperature, and guardrails.
• Data Handling: Experience with handling complex data structures.
• The "Glue" Mindset: You enjoy writing the code that connects different services ( like the AWS, AI APIs, and Database) to make a seamless features.
• Collaborative Autonomy: You will own the AI domain, but you won't be on an island. You will be embedded in a senior engineering team that supports you with architecture, code reviews, and best practices.

• Experience with AWS infrastructure.
• Familiarity with the US Real Estate, Title, or Escrow process.

• Working in a transparent environment which focuses on solving problems and getting things done.
• The opportunity to work with very smart and driven people.
• The ability to grow your talents and career in a high-growth sector.
• A remuneration package that is based on the candidate's motivation, skills, and experience.

Please submit your resume to this job ad along with a portfolio of your AI-related experience, GitHub account and anything else you find applicable. 

This is a highly responsible position that supports the health, safety and welfare of Tribal members and the public. The incumbent in this position is responsible for managing the regulation and inspection of building construction, electrical, mechanical, and plumbing installations and directing compliance and enforcement of all related federal, state and local ordinances of the Seminole Tribe of Florida (STOF). Work involves technical review of all types of construction drawings, plans, and specifications to ensure compliance with applicable codes and ordinances. The incumbent provides general oversight, management, and leadership to building inspectors, plans examiners, and permit technicians as required and is responsible for the issuance of all permits and Certificates of Occupancy in accordance with the Florida Building Code and Tribal administrative policy. The person is also responsible for the administration of the Tribe’s elevator and commercial structure annual inspections programs.

The individual works closely with the Director of the Tribal Inspector’s Department to support all departmental programs and initiatives, including but not limited to the development of the departmental budget and strategic plans, development of building inspections processes and programs, evaluation and improvement of service delivery systems, and administration of the Tribe’s Unsafe Structures Ordinance Program. The incumbent may attend Tribal Council meetings or other community meetings and works with all necessary stakeholders to resolve complaints, address concerns, or solve problems as needed. Bachelor’s degree in Engineering, Building Construction, Civil Engineering, Architecture or related field is required. Master’s degree is preferred. A minimum of ten (10) years of experience as an Architect, Engineer, Building Inspector, Build Code Administrator, or Construction Superintendent with at least five (5) years being in a supervisory capacity is required; or, any equivalent combination of education, experience and training will be considered.

Prior experience with EnerGov software system is preferred. Possession and maintenance of a Building Code Administrator certification by the Florida Building Code Administrators and Inspector’s Board is required. Possession of a valid Florida Driver’s License is required. Must have excellent organizational and interpersonal skills including the ability to clearly communicate complex ideas in English both orally and in writing. Must be able to respond and commit to full duty operations during Hurricane or other emergency events. Demonstrate proficiency with Microsoft software programs. Demonstrate excellent organizational and interpersonal skills including English written and oral communication skills are required. Ability to travel and work a flexible schedule including evenings, weekends and holidays.

Construction Project Scheduler

'We're all Americaribe'. It means that we share the same culture, expertise & refers to the efforts we take every day to make ourselves operate more tightly and agilely. Our pride, achievements, and experiences have all tied to the minds of teamwork, innovation, and novelty. Talented newcomers with creative and technical skill sets like these, along with an energy and enthusiasm that effectively contribute to team morale, are always needed as Americaribe continues to grow. Beyond the high-level benefits and competitive salary is a plethora of opportunity to accentuate your career path, allowing growth from advanced trainings and experience, provided by Americaribe, to build leadership, versatility, & consistency. Americaribe LLC is known for applying its capacity for technical and commercial innovation, cutting-edge engineering skills and expertise in development to offices, hotels, airports, hospitals, schools, housing, exhibition centers, leisure facilities, etc. Americaribe is the subsidiary of Bouygues Bâtiment International, operating in over twenty countries, also known for combining its networks alongside major contracts with highly added value.

POSITION SUMMARY

The Project Scheduler is responsible for developing, maintaining, and monitoring project schedules to ensure construction projects are delivered on time and within budget. This role collaborates closely with project managers, preconstruction managers, estimators, superintendents, subcontractors, and clients to coordinate timelines, monitor progress, identify risks, and recommend corrective actions when necessary.

ESSENTIAL DUTIES AND RESPONSIBILITIES

Schedule Development & Planning

• Develop detailed baseline schedules using tools such as Primavera P6, Microsoft Project, or similar scheduling software, covering all project phases from RFP/Project Launch through Substantial Completion and Final Turnover.
• Create Work Breakdown Structures (WBS) and define project activities, durations, and sequencing.
• Establish logic-driven critical path (CPM) and identify schedule constraints.
• Resource load schedules with quantities, labor, and cost data when required.
• Prepare schedule narratives documenting assumptions and methodologies.
• Collaborate with project managers, preconstruction managers, field teams and estimators during both preconstruction and construction phases.

Schedule Monitoring & Control

• Conduct site visits to assess and document construction progress.
• Update schedules regularly to reflect actual progress.
• Perform critical path analysis and identify variances.
• Develop recovery schedules when delays occur.
• Perform Time Impact Analyses (TIA) to assess the effects of change orders and scope modifications.

Means & Methods

• Define construction means and methods required to achieve schedule objectives.
• Develop site logistics and Maintenance of Traffic (MOT) plans in 2D or 3D formats.

Reporting & Communication

• Prepare and distribute schedule reports, dashboards, executive summaries, and look-ahead schedules.
• Present schedule status updates to internal stakeholders and clients.
• Provide scheduling input for executive reports and owner meetings.
• Maintain documentation to support claims and delay analyses when required.

Risk Management

• Identify schedule-related risks and recommend mitigation strategies.
• Conduct what-if scenario analysis to evaluate alternative approaches.
• Support dispute resolution efforts through detailed time impact analysis.

Collaboration

• Coordinate with project management, engineering, procurement, and subcontractors to ensure schedule alignment.
• Support resource planning and labor forecasting efforts.
• Ensure alignment between field operations and master project schedules.
• Perform other duties as assigned.

QUALIFICATIONS

Education

• Bachelor’s degree in construction management, engineering, or related field (preferred).

Experience

• 3 to 7+ years of experience in construction scheduling or project controls preferably within the US, South Florida or the Caribbean.
• Experience on commercial, industrial, infrastructure, or residential projects.

Technical Skills

• Advanced proficiency in Primavera P6 and Microsoft Project.
• Strong understanding of construction sequencing means and methods.
• Solid knowledge of Critical Path Method (CPM) scheduling.
• Familiarity with cost control, earned value management (EVM) principles
• Ability to use construction resources data to validate productivity rates and activity durations.
• Proficient in Microsoft Office Suite (including Excel), Power BI, Bluebeam is a must.
• Working knowledge of (or willingness to learn) BIM, Revit, AutoCAD, Navisworks, cmBuilder and Synchro 4D.
• Ability to interpret contract documents, drawings, specifications, and scopes of work.
• Ability to perform quick quantity take-offs for scheduling purposes.

Soft Skills

• Strong analytical and problem-solving skills.
• Excellent written and verbal communication skills.
• High level of attention to detail and organizational skills.
• Ability to manage multiple projects simultaneously.
• Experience working with multidisciplinary and multicultural teams.
• Innovative mindset with curiosity toward emerging technologies.

PREFERRED CERTIFICATIONS (OPTIONAL)

• PMI Scheduling Professional (PMI-SP).
• Project Management Professional (PMP).
• Planning & Scheduling Professional (PSP) – AACE.

WORK ENVIRONMENT

• Primarily office-based with regular visits to active construction sites.
• Travel may be required depending on project location.
• Full-time position with occasional extended hours to meet project deadlines.

Americaribe LLC is an Equal Opportunity Employer

Tired of playing it safe? Or maybe you’re ready to stop just "running numbers" and start steering the ship of a $100M+ portfolio.

It’s time to move beyond the calculator—and finally own the strategy that wins the work.

This is your opportunity to serve as the architect of our client's preconstruction engine. As Chief Estimator, you aren't just a department head; you are the primary gatekeeper of risk, the master of pricing strategy, and the right hand to the President. We are looking for a heavyweight leader who can navigate the complexities of South Florida’s municipal and private markets, transforming raw data into winning GMP and Design-Build recommendations.

It doesn’t stop at Chief Estimator: We aren’t just looking for a technician; we are looking for a pivotal leader. Our client is a multi-generational, family-owned powerhouse that has grown from 10 employees to over 200 by betting on the right people. We want a master of execution who can mentor the next generation of estimators while presenting final budgets directly to Ownership with total authority.

Why You'll Love This Role

• Command the Precon Lifecycle – Total oversight from early conceptual budgeting through the final handshake. You own the standards, the templates, and the "Go/No-Go" strategy.
• Lead a Specialized Force – Manage and mentor a high-performing Estimating Department, setting the bar for excellence across Hard Bid, CMAR, and Design-Build pursuits.
• High-Stakes Influence – Present your vision directly to the President and Ownership. Your risk assessments and contingency logic will be the foundation of our client's future growth.
• Deep Market Roots – Leverage a legacy of over 30 years and 1,000+ completed projects in South Florida. This isn't just a job; it’s an opportunity to build upon a massive local legacy.

What You'll Do

• Own the Bid Strategy – Define fee structures, contingencies, and escalation plans. You aren't just filling out forms; you're engineering a path to victory.
• Master Complex Execution – Lead progressive and conceptual estimating for massive projects, ensuring cost-to-budget tracking and aggressive Value Engineering.
• Direct Subcontractor Outreach – Utilize your South Florida network to drive market intelligence, ensuring 100% competitive coverage and elite-level bid leveling.
• Mitigate Risk with Precision – Maintain the risk register. Identify the scope gaps and "hidden" costs that others miss, ensuring every GMP is bulletproof.
• Foster Collaborative Design – Partner with design teams for Target Value Design and logistics planning, bridging the gap between a blueprint and a profitable reality.

What You Bring

• Industry Tenure – 10+ years of progressive estimating experience, with at least 3–5 years in a leadership/management seat.
• Regional Expertise – A robust South Florida subcontractor network and an intimate understanding of municipal bid requirements (bonds, forms, and addenda control).
• Technical Prowess – High-level proficiency in ProEst, BuildingConnected, and P6/MS Project. You should be a master of OST/Bluebeam and advanced Excel cost modeling.
• Strategic Acumen – Proven success in Hard Bid and GMP settings, with the ability to integrate logistics, phasing, and long-lead items into a master schedule.

What You'll Get

• Elite Compensation – Top-tier base salary plus bonuses tied to the success of your department and projects.
• Stability & Legacy – Join a family-owned organization with over 30 years of stability and a dedicated workforce of 200+ professionals.
• Executive Access – A seat at the table with the President and Ownership, influencing the company’s direction.
• The South Florida Lifestyle – Work for a specialized leader in one of the world's most dynamic construction markets.
• Comprehensive Benefits – Full coverage for you and your family, reflecting our client's commitment to their "qualified personnel" who make their success possible.

Ready to Command the Strategy Behind the Build? If you are a lead estimator ready to step into a Chief role with authority, distinction, and a clear path to executive influence, we want to talk.

Apply today to start the conversation.

Lead Millwork Estimator

Build the Best Preconstruction Team in Florida

Location: Miami, FL (In-Person)

Department: Preconstruction / Estimating

Reports to: Founder & CEO

AWM Group is a high-end custom architectural millwork company delivering complex interior environments for luxury residential, hospitality, and commercial projects. As we scale, we are building a world-class preconstruction organization—and we are looking for a senior leader to own and elevate it.

This is not a takeoff-only role. This is a leadership position.

Own and professionalize AWM’s estimating and preconstruction function. This role is responsible for building and leading a scalable, best-in-class estimating department—leveraging people, process, and technology to set a new standard for the millwork industry in Florida.

Your mission:

Department Leadership

• Lead and structure the estimating function
• Define standards, templates, and workflows
• Build a scalable preconstruction system
• Mentor and grow junior estimators

Project Estimating

• Perform detailed takeoffs and pricing for custom millwork
• Analyze drawings, specs, and design intent
• Identify risks, gaps, and constructability issues early
• Develop clear scopes, assumptions, and alternates

Strategic Preconstruction

• Partner with Sales, PMs, Engineering, and Operations
• Align estimates with real production and installation methods
• Improve hit rate without eroding margin
• Build historical cost data and feedback loops

Client & GC Interface

• Support clarifications, value engineering, and precon conversations
• Help position AWM as a professional, reliable partner

• 8–15+ years in architectural millwork estimating
• Deep understanding of custom casework and specialty interiors
• Strong grasp of materials, fabrication, and installation drivers
• Strategic thinker—not just a counter of parts
• Experience building systems and mentoring others
• Clear communicator with leadership presence
• Spanish a plus

Technology & Systems Proficiency (Required)

• Extremely proficient with document-sharing and collaboration platforms
• Fully fluent in:
• Microsoft Office (Excel, Word, Outlook)
• Google Workspace (Docs, Sheets, Drive)
• Comfortable working inside ERP and CRM systems
• Expert user of digital takeoff and markup tools, including:
• Bluebeam Revu (required)
• Other takeoff platforms a plus
• Able to organize, version, and control large volumes of drawings and data with precision

• Full-time, in-person role based in Miami, Florida
• Candidate must live in South Florida or be willing to relocate
• Close collaboration with leadership, engineering, and operations
• Occasional project and factory visits

Base Salary: $110,000 – $150,000 per year

(Commensurate with experience and leadership level)

Performance incentives tied to hit rate, margin quality, and preconstruction excellence.

If you are a senior millwork estimator who wants to build something enduring—not just price jobs—AWM is the place to do it.

About the Company

CAP Government, Inc. is seeking a Director of Operations that can provide professional and administrative work that includes planning, design, and construction of a wide variety of projects. The candidate should have at least three years relevant experience and will function as the project manager on major projects for municipal and educational clients. Some local travel may be required for inspections and managing projects in the assigned area. We currently have positions available in our Miami-Dade office. Talent is the essence of meeting our client's objectives, goals, and challenges. Candidates must possess excellent organizational, analytical, and interpersonal skills.

About the Role

Manage all aspects of small to intermediate projects throughout the development lifecycle, including project scope, schedule, resources, quality, costs and change.

Responsibilities

• Work closely with stakeholders and to define project parameters, then translate customer needs into formal requirements, using knowledge of the industry and delivery methodology.
• Develop detailed project schedule, resource plan, and status reports, managing task assignment to project resources and reporting on and managing project scope throughout the lifecycle.
• Manage projects and maintain schedule, budget, and profitability of assigned projects, overseeing the preparation of plans, specifications, and proposals.
• Ensure all legal requirements, building and safety codes, safety inspections, city guidelines, and local and state regulations are met.
• Oversee and supervise construction project progress and provide reports on timeline, progress, and adjustments.
• Coordinate with other design disciplines such as structures, hydraulics, traffic, and utilities, etc.
• Collaborate with management to determine long-range plans and objectives, including recommendations on project staffing, evaluating, and mentoring subordinate staff.
• Review, monitor, and develop complex layouts, sketches, plans, specifications and estimates, standards and guidelines, correspondence, and prepare reports.
• Participate in the preparation of technical proposals and labor estimates.
• Maintain positive client relationships.
• Efficiently manage a team of employees across multiple projects.
• Lead in the formulation of advance technical concepts in proposal development, preliminary design phases, and presentations to client.
• Represent respective projects at meetings and conferences.
• Support efforts in proposal development, project scoping as well as with client relationship.
• Perform other related duties as assigned by the Manager.

Qualifications

• Bachelor's degree in Building Construction, Construction Management, Civil Engineering, or Architecture or related field from an accredited university.
• Five years of experience in mixed-use project development, management, administration, and inspection along with a demonstrated knowledge of construction, engineering, architecture principles & construction techniques.
• Skill in managing multiple projects simultaneously.
• Experience in dealing with municipal agencies.
• Professional Engineering License in Florida OR Registered Architect License in Florida is required.
• Building Official License in Florida is a plus.
• Experience with municipal inspections is required.

Required Skills

• Excellent organizational skills.
• Strong analytical skills.
• Interpersonal skills.

Preferred Skills

• Experience in proposal development.
• Knowledge of construction techniques.

Pay range and compensation package

The salary range for this role is $105-140K annually, subject to potential increases contingent upon factors such as experience, licenses, or certifications. Our Health and Welfare Benefits are designed to meet your needs, with eligibility starting on your first day of employment:

• Medical, Dental, and Vision coverage
• Company-matched Retirement plan
• Generous Paid Time Off and Company Holidays
• Life Insurance and AD&D coverage
• Short-Term Disability (STD) and Long-Term Disability (LTD)
• Optional life and pet insurance
• EAP and Total Wellbeing Lifestyle Programs
• Tuition Assistance and/or Professional Development
• Employee Discounts

This information is transparently provided in adherence to several state and local Equal Pay and Pay Transparency Laws.

Equal Opportunity Statement

Our firm is committed to diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, disability, protected veteran status, gender identity, or any other factor protected by applicable federal, state, or local laws.

Join us at Bureau Veritas, where your well-being and professional growth are our top priorities.

Estimator – High-End Commercial Interiors / Hospitality

Miami, FL

$100,000 – $165,000 + Bonus + Great Benefits

Are you a detail-driven estimator who thrives on complex projects and competitive bids?

Join a leading high-end commercial ESOP General Contractor delivering exceptional Class-A office buildouts and luxury hospitality spaces for major clients across South Florida.

I’m looking for multiple Estimator’s who can take ownership of the pre-construction process, from analyzing drawings and scoping projects to building strong relationships with clients and subcontractors. If you enjoy turning complex plans into accurate, competitive bids and influencing projects before they even break ground, this role is for you.

As an Estimator, you will:

• Review architectural, structural, and MEP drawings to scope projects and complete detailed take-offs
• Prepare and manage RFIs, review addenda, and update proposals accordingly
• Collaborate with project teams and clients in weekly coordination meetings
• Provide pre-construction cost analysis using historical data and comparable projects
• Conduct site visits and document existing conditions through photographic reports
• Develop Value Engineering (VE) options and track savings against overall budgets
• Produce clear, comprehensive bid narratives across all trades
• Solicit and evaluate subcontractor bids, ensuring full scope coverage
• Manage the bid timeline from RFP through award

We are ideally looking for:

• Background in Construction Management or Engineering preferred
• Proven estimating experience in interior tenant improvements
• Strong ability to interpret preliminary plans and anticipate scope gaps or conflicts
• Experience building and analyzing project schedules and long-lead items
• Deep understanding of subcontractor scopes and landlord rules/regulations

You’ll work with a range of industry-standard tools to support accurate and efficient estimating, including Procore, PlanSwift, On-Screen Takeoff, Bluebeam, and Excel, using them to analyse drawings, complete take-offs, manage documentation, and build detailed, competitive project estimates.

You will join a team working on high-profile commercial and hospitality interior projects, be part of an employee-owned company (ESOP) where your contributions directly impact the company’s success and collaborate with a highly experienced team in a fast-paced, quality-driven environment.

Interested?

For a confidential conversation, call or text Scott at .

You can also send your updated resume to to learn more.