Engineering Structures Jobs in Crown Point Indiana Remote
413 positions found
Project Management Organization / Corporate Services
This position is not eligible for recruiting or sourcing by outside parties.
Disclaimer: Be cautious and only respond to emails from our \" \" domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels.
We've got the power to energize Your career and spark YOUR Work/Life Balance through professional development and exceptional benefits. Don't delay, plug in today for an inclusive meaningful career in power, distribution, transmission, engineering, design, technology, or innovation at Mesa Associates, Inc.
The primary functions of the Project Manager is to plan, manage, and implement engineering improvement projects with the objective of delivering improved engineering quality for the client by ensuring engineering processes, systems, and resources are integrated and optimized to achieve performance goals. The position requires a working knowledge of power industry design and construction practices, standards, and processes as well as the use of independent judgment, enhanced verbal and written communication skills, and ability to work with minimal supervision with the support of a team consisting of local and remote resources. The ideal candidate would have a Bachelor's or Associates degree in Engineering or Technology, Business, Construction Management, or related field from an accredited curriculum, and a minimum of eight years of relevant experience with at least two years' experience independently managing design or construction projects.
Desired PM Functions:
- Successfully deliver on rapid-response special projects, including but not limited to, gathering data, meeting with stakeholders and documenting findings, development of special reports, etc.
- Perform detailed project audits at various design stage gates
- Evaluate new engineering project scope documents, identify risks, develop response plans for implementation by the larger project team
- Identify, document, assign, track, and facilitate completion of improvement projects
- Manage continuous improvement opportunity information system, including intake of new opportunities, tracking and communicating of status, progress, and coordination with larger team to communicate barriers and get them resolved.
- Investigate high impact project issues and perform root cause analyses (RCA) to assist in driving continuous quality improvement efforts
- Work with information management and other resources to generate relevant reports and/or bulletins to communicate performance metrics, status of activities, etc.
- Identify target areas for improvement opportunities based on reports and results of audits, analyses, etc.
- Utilize outstanding interpersonal skills to provide guidance and mentorship to client resources according to needs identified in various reports.
- Initiate projects: Complete project planning documents, which include detailed scope/schedule outline for completion while looking for and finding ways to improve operations; process efficiency
- Project Definition: Assist Project Team in defining/clarifying project scope and level of detail required, satisfying customer expectations and projecting requirements.
- Maintain Project Status: Keep the project status reporting system current with the actions and changes that take place on assigned projects
- Manage Project Implementation: Leads assigned project team, ensuring that project goals/objectives are achieved, and all business processes and applicable procedures are followed
- Communicate effectively with project team, client, and 3rd parties as required to facilitate coordination of activities
- Coordinate/Communicate with peers: Work with project team to identify, document and resolve changes that may impact performance of projects
Knowledge, Skills, and Abilities:
- Capable of handling broad scope projects that have medium to long-term focus and applying knowledge to handle complex problems independently under the direction of a Program Manager and/or client management personnel.
- Possess solid verbal and written communications skills. Ability to coordinate with and interface with contractors, vendors, engineers, colleagues, and other electric utilities personnel at a high professional level
- Display strong interpersonal skills to build relationships and work effectively with clients, peers, and affiliates
- Strong capability in Microsoft Word and Excel
- Willingness to develop, promote and comply with Mesa and client safety requirements
- Ability to travel regionally to Northern Indiana for project requirements
- A background in substation design/engineering or transmission/distribution line design/engineering is preferred
- Ability to review project designs for potential problems and provide solutions that are consistent with industry, client, and internal standards
- Prioritize and schedule multiple tasks to meet project timelines
Notice to External Search Firms: Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.
QualificationsSkillsPreferredProject ManagementIntermediateProject DesignIntermediateDesign and ConstructionIntermediateEngineering DesignIntermediatePower Distribution DesignIntermediateProject EngineerIntermediateSubstation EngineeringIntermediateTransmission Line EngineerIntermediateBehaviorsRequiredDedicated: Devoted to a task or purpose with loyalty or integrityTeam Player: Works well as a member of a groupDetail Oriented: Capable of carrying out a given task with all details necessary to get the task done wellPreferredInnovative: Consistently introduces new ideas and demonstrates original thinkingMotivationsRequiredSelf-Starter: Inspired to perform without outside helpPreferredAbility to Make an Impact: Inspired to perform well by the ability to contribute to the success of a project or the organizationEntrepreneurial Spirit: Inspired to perform well by an ability to drive new ventures within the businessEducationPreferredAssociates or better in Engineering or related field.
Bachelors or better in Business Administration or related field.
Bachelors or better in Engineering or related field.
ExperienceRequired10 years:Electric utility design / engineering5 years:design / engineering, technology, process, quality, or similar industriesLicenses & CertificationsPreferredProject Mgmt Prof (PMP)
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
This position supports municipal and land development projects by contributing to the planning, review, and construction oversight of public and private infrastructure improvements. The engineer collaborates with internal teams, external consultants, contractors, and clients to help move projects from concept through completion.
Core Responsibilities
- Support the review of development plans related to public infrastructure, including stormwater management, utilities, roadway design, and site access improvements
- Assist with field observations and inspections for development projects and residential construction to confirm compliance with approved plans
- Prepare and support construction quantities, cost estimates, and supporting documentation for roadway maintenance and small-scale capital improvement projects
- Contribute to bid packages by assisting with technical details, quantities, and specifications
- Coordinate with contractors and project partners to address design questions and construction-related issues
- Build familiarity with state DOT standards and municipal agency requirements through hands-on project involvement
- Provide regular updates on project progress, schedules, and deliverables to supervisors and project teams
- Participate in meetings with clients and stakeholders to communicate progress and respond to questions
- Support project budgeting efforts and assist with tracking costs and schedules
- Work within established quality control procedures to ensure consistency and accuracy across project deliverables
- Maintain organized project records and documentation
- Perform additional duties as needed to support department goals
Qualifications
- Bachelor’s degree in Civil Engineering or a closely related discipline from an ABET-accredited program or equivalent
- Engineer in Training (EIT) certification preferred, or ability to obtain within one year
- Prior experience supporting civil engineering projects through coursework, internships, or professional roles preferred
- Strong problem-solving skills and attention to detail
- Ability to manage tasks independently while contributing to a team environment
- Reliable work habits and consistent availability
- Exposure to engineering and design software such as AutoCAD, MicroStation, and Microsoft Office preferred
- Comfortable communicating with technical teams, clients, and contractors
Stevens Engineers & Constructors has an excellent opportunity for an experienced and highly motivated Project Manager to join our Hobart Operations Team. The ideal candidate will have project management experience in industrial construction markets. The Project Manager position is responsible for providing oversight for all phases of industrial construction projects, including coordinating employees, subcontractors, materials, equipment, while ensuring that specifications are being followed, and work is performed within quality standards as well as on schedule and within budget.
The ideal candidate will also have a client focus approach and will work well independently and as part of the project team.
Stevens offers a competitive salary commensurate with experience, along with an excellent benefit package. This is a perfect career opportunity to join an experienced group of professionals that are committed to providing our customers quality results.
Essential Duties and Responsibilities
Provide leadership and to establish and maintain effective and harmonious working relationships with all those involved in the project.
Organize and execute the project safety compliance program within the guidelines of company policies. Initiate project safety meetings for on-site supervisors and labor force.
Interface with the client as his primary contact, by receiving and communicating initial project setup information and periodic project status, writing significant project related correspondence, and representing the Company in meetings.
Develop and maintain a thorough understanding of the provisions and requirements of all contract documents, including plans, specifications, owner’s contract, subcontracts and purchase orders.
Develop and/or analyze the preliminary project documentation, such as project code of accounts, subcontracts and purchase orders.
Organize and plan the execution of the physical work.
Develop the project schedule and direct its long-term planning and execution.
Communicate/coordinate schedule and plan with subcontractors and vendors.
Recognize on-site activities which may impede project progress or jeopardize compliance to project/contract requirements.Prepare and submit related informational documents to the client or other responsible parties and implement corrective measures.
Maintain strict control of the project budget for each work activity. Report monthly on the progress and current profitability of the project.
Write subcontracts and purchase orders for field generated purchases and contracts. Review and approve related subcontractor and vendor invoices and change requests.
Prepare, quote and negotiate contract changes with General Manager’s guidance.
Maintain open communication with all other support and business units involved with the project.
Maintain open line of communication with the local union officials.
Promote goodwill with clients, architects, engineers etc., to facilitate construction activities and future repeat business.
Supervise the project activities of the on-site project engineer, field superintendents, office manager and clerk.
Participate in bidding, pre-construction services, budgeting and Continuous Improvement Programs.
Skill Requirements
Bachelor’s Degree with major coursework in Construction Science, Building Science or Construction Management, Civil Engineering, or a related field is preferred.
Ten (10) years of professional experience in the construction industry, including five (5) years of managerial experience.
Able to multitask, prioritize, and manage time efficiently.
Able to manage team of employees and multiple projects.
Experienced at compiling and following strict budgets.
Excellent verbal and written communication skills.
Accurate and precise attention to detail.
Goal-oriented and organized leadership.
Able to analyze problems and strategize for better solutions.
In-depth understanding of the construction industry.
Organized and able to create multiple timelines, budgets, and schedules.
Knowledge of local, state, and federal building code regulations.
Able to build solid relationships with team members, vendors, and customers.
Computer Skills: Proficient with Microsoft Office; Microsoft Project and experience with construction / project management software.
Equal Opportunity Employer
Stevens Engineers & Constructors, Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category.
We are proud to be a Drug Free Workplace that places Safety First!
This established healthcare system is steadily expanding in virtually all physician service lines.
Their physicians work well together and are eager to provide mentorship and support in developing physician practices.
The group has needs in Hobart, St.
John, Munster, and Valparaiso, IN.
All locations are within a 1-hour drive of Chicago, Illinois.
About the Opportunity: Work in a small-group setting.
Monday-Friday work week.
No weekends 36 clinical hours per week Average daily patient census 20-24 Shared call structure with several providers EPIC EMR Opening due to Growth Compensation/Benefits: Guaranteed base salary plus RVUs with a bonus structure based on productivity and quality Up to $25,000 in relocation assistance Robust benefits package including Medical, dental, vision, malpractice with tail, $6,000 per contract year for license, dues, CME Location/Community: Family-friendly locations, all within a 1-hour drive of Chicago.
GB-48
Job Family : Mechanical Design Engineering
Organization : Data Center Infrastructure Team
Location : Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
* Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
* Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
* Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
* Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
* Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
* Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
* Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
* Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
* Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
* Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
* Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
* Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
* Lead mechanical design reviews and contribute to cross-functional design validation efforts.
* Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
* Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
* Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
* Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
* Conduct root cause analysis and corrective actions for mechanical failures or field issues.
* Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
* Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
* May perform other duties and responsibilities as assigned
How will you get here?
Education :
* Bachelor's Degree in Mechanical Engineering or related engineering discipline.
Experience :
* 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
* Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
* Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
* Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
* Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
* Excellent interpersonal and communication skills
* Creative, self-motivated, accountable, and team-oriented
* Able to work independently with minimal oversight
* Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
* Skilled in writing reports, business correspondence, and procedural guides
* Effective at presenting information and responding to management, clients, and public queries
* Capable of influencing others and sharing best practices
* Comfortable working as part of a global team
* Capable of assessing projects, articulating risks, and developing project milestones
* Familiar with stage-gate processes in project lifecycle management (PLCM)
* Able to mentor less experienced engineers
* Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
* Master's Degree in Mechanical Engineering
* Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
* Active Professional Engineer (PE) license.
* Knowledge of regulatory and safety standards applicable to data center infrastructure.
* Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.