Engineering Structures Jobs in Crofton Md Flexible
442 positions found — Page 2
This is made possible by the generosity of Milton and Catherine Hershey, who established the school in 1909 and ensured it was fully endowed.
Thanks to their foresight and generosity, the school has over 12,000 graduates and continues to expand to serve more students.
MHS is hiring married couples to serve as Full-time Flex Houseparents.
In this unique and life-changing career, couples reside in on-campus student homes and provide care, guidance, supervision, and support for a group of approximately 8–13 students living in the home.
Flex Houseparents play a vital role in creating a structured, family-like environment that fosters students’ academic, emotional, and social development so they can reach their full potential.Responsibilities include:Providing daily supervision and mentorshipManaging household routines and student schedulesAdministering medications and ensuring student wellnessDriving students to activities, as well as planning and actively engaging in developmental and recreational activities with studentsLeading daily devotions and accompanying students to Sunday ChapelOverseeing budgeting and household reportingUpon hire, Flex Houseparents initially support various student homes and follow a working schedule of nine consecutive days on duty, followed by three days off.On weekdays, houseparents have unscheduled time while students are in school.
Flex Houseparents eventually transition into a Placed Houseparent role, where they live and work with the same group of students in their own student home.
Benefits include:Salary: $44,768.00 per person (approximately $168,000 total compensation per couple, including free housing, meals while on duty, utilities, and more)Comprehensive benefits: medical, dental, and vision insurance; health savings and flexible spending accounts; life insurance; disability options; retirement savingsRelocation assistance and paid training providedPaid time off provided at designated times throughout the yearQualifications: Qualifications include:Experience working or volunteering with youthThis is a two-person role for couples legally married for at least two yearsBoth spouses must be age 27 or olderNo more than three dependent children may reside in the student homeCommitment to a smoke-free and weapon-free campus; no alcohol permitted while on dutyPet limitations: only fish and one dog of approved breeds allowedValid U.S.
driver’s license and ability to become certified to drive student home vansComfort leading students in daily devotions and accompanying them to Judeo-Christian Sunday Chapel services (proselytizing prohibited)High school diploma or GED requiredAbility to lift to 50 lbs.Demonstrated integrity and professionalism; MHS staff serve as role models for studentsThis is a unique, challenging, and rewarding career and life choice that requires a high level of commitment to student success from both spouses.
For consideration, both spouses must complete individual employment applications.
To learn more and apply, visit/>
.
Discover the advantages of Advanced Independent Practice - Anne Arundel Urology (AAU) - powered by Urology Alliance.
As a member of Urology Alliance (UA), Anne Arundel Urology (AAU) is supported by the nation’s leading patient-focused, excellence-driven physician-led urology network. This partnership empowers AAU to deliver superior, individualized patient care by leveraging Urology Alliance’s robust, world-class business and organizational support, ensuring our physicians can focus on what they do best – providing top-notch care in a successful and dynamic private practice setting.
Practice Opportunities:
Employed Position with Partnership Track
Local Autonomy with National Resources
Generous Financial Package
Relocation Allowance, Signing Bonus & Annual CME
Why Anne Arundel Urology?
At AAU, we combine advanced urological expertise with a collaborative, supportive culture. Joining our team offers the chance to work with state-of-the-art technology, collaborate with skilled professionals, and contribute to a practice known for its quality and innovation. Whether you’re a general urologist or bring specialized expertise, we’re interested in discussing how your skills could enhance our group and serve our community.
What You Could Do:
Provide comprehensive urological care, diagnosing and treating a wide range of conditions with tailored, patient-focused solutions.
Perform surgeries and outpatient procedures in modern facilities, blending clinical and operative responsibilities.
Collaborate with our team of urologists, advanced practice providers, and staff in a collegial, supportive environment.
Enjoy a role customized to your strengths, with a schedule that balances professional fulfillment and personal well-being.
Who We’d Love to Meet:
Board-certified or board-eligible urologists with a solid foundation in general urology—subspecialty interests are a welcome addition!
Compassionate, patient-first professionals with strong communication and interpersonal skills.
Team-oriented individuals excited to contribute to a respected, growing practice.
Proactive physicians dedicated to advancing urological care through expertise and innovation.
Why Choose Anne Arundel Urology?
Future-Focused Opportunity: While we don’t have immediate openings, we’re always open to building relationships with top talent for future growth.
Reputation for Quality: Join a trusted practice known for delivering exceptional urological care in Anne Arundel County and beyond.
Advanced Resources: Access cutting-edge tools and facilities to provide the best outcomes for your patients.
Career Potential: Benefit from potential mentorship, leadership opportunities, and a competitive compensation package with comprehensive benefits when the right role emerges.
Why Annapolis is the Place to Be:
Known as the "Sailing Capital of the World," Annapolis is a picturesque coastal treasure that perfectly blends its prestigious role as Maryland’s state capital with a high-energy center of maritime history and academic excellence. It is a place where you can watch midshipmen in crisp uniforms walk the historic brick streets in the morning and set sail across the Chesapeake Bay by the afternoon. With a metro area population of approximately 400,000, Annapolis is large enough to host international boat shows and high-level government sessions, yet small enough to maintain its colonial charm and walkable, waterfront atmosphere.
Annapolis Lifestyle:
Natural & Historic Beauty: Celebrated for its stunning views of the Severn River and the Chesapeake Bay, the city is home to historic landmarks like the Maryland State House—the oldest in continuous legislative use—and the 18th-century William Paca House and Garden.
Cultural Roots: As a historic colonial seaport, the city hosts the annual Maryland Maritime Festival and a rich array of events celebrating its naval heritage, centered around the United States Naval Academy and the bustling shops and taverns of City Dock.
Strategic Stability: As both a state capital and a maritime hub, Annapolis offers the economic resilience of a government center paired with the prestigious innovation of elite educational institutions and a thriving tourism and marine industry.
Patients Come First.
Every decision we make is anchored in strengthening patient care. Our physicians lead with a commitment to quality, access, and outcomes, and our shared infrastructure ensures they have the tools, data, and support to continually elevate care in every community we serve.
A Physician-Led Organization at Every Level.
Our model is built on physician leadership. Through our Physician Executive Committee, Regional Clinical Governance Boards, and Local Head Physicians, clinical decision-making remains with those who deliver care. This physician-led structure, supported by national-scale resources, preserves autonomy while strengthening specialty excellence.
True Partnership That Enables Physicians to Focus on Patients.
Instead of a traditional management model, we operate as a Management Services Organization (MSO). Our national infrastructure, which includes analytics, technology, revenue cycle, compliance, and operational support, reduces administrative burden so physicians can devote their time and expertise to patients. We enable, we support, and we align. We do not manage.
Outcomes Matter.
Our leadership is driven by the measurable value we deliver to physicians, practices, and patients. Our partnership-first approach, combined with data insights and operational strength, has fueled significant clinical, operational, and practice growth. As more top-tier physicians join our specialty-led ecosystem, we continue to expand access and raise the standard of specialty-care nationwide.
Interested in learning more?
We are just a click away. No pressure. Just information and a partnership built for physicians who want to lead the future of specialty care.
Be empowered to make your best next career move!
The Specialty Alliance is a physician-led Management Services Organization (MSO) that supports leading specialty practices with national-scale infrastructure, data, and resources. Our partnership model preserves clinical autonomy while enabling responsible growth and high-quality specialty care nationwide. To learn more about The Specialty Alliance, visit .
The Specialty Alliance Corporate Headquarters, 550 Reserve St., Suite 550, Southlake, TX 76092, USA
General Summary of Position
Oversees the operation of the Boilers and Chiller Plant and associated equipment ensuring the efficient operation during assigned shift. May be required to lead or assist with regular maintenance or emergency repairs to the boilers chillers and/or related equipment.
Primary Duties and Responsibilities
- Oversees/monitors the operation of the Chiller Plant during assigned shift. Ensures the systems are operating at best possible performance levels.
- Performs regular maintenance/repairs to the Chiller Plant such as appropriate during shift reporting larger/ more complicated needs to the Forman or Power Plant Engineer I for action by the maintenance crew.
- Assists the maintenance/repair crew with scheduled and emergency repairs to the boilers generators chillers and related Facilities Management equipment.
- Ensures that assigned areas are operating within all applicable Hospital federal and local governing codes standards and regulations including but not limited to: OSHA NFPA The Joint Commission and Fire and Life Safety practices.
- Learns and remains current with the latest applicable federal and local governing codes standards and regulations regarding fire safety plumbing electrical and plant operations including but not limited to: OSHA NFPA The Joint Commission ASHRAE ANSI DCRA D.C. Fire & Safety Codes and the Hospital's Fire and Life Safety practices.
Minimal Qualifications
Education
- High School Diploma or GED required or
- Trade/vocational school graduate or equivalent with courses in chemistry physics and/or mathematics and such training as to be able to read: layout diagrams blueprints mechanical drawings work sketches etc. preferred
Experience
- completion of an approved apprentice training program required
Licenses and Certifications
- Must have a current D.C. Third Class Operating License required and
- current CFC License. required
Knowledge Skills and Abilities
- Familiarity with the latest applicable codes standards and regulations including but not limited to: OSHA NFPA The Joint Commission and Fire and Life Safety practices.
General Summary of Position
Oversees the operation of the Boilers and Chiller Plant and associated equipment ensuring the efficient operation during assigned shift. May be required to lead or assist with regular maintenance or emergency repairs to the boilers chillers and/or related equipment.
Primary Duties and Responsibilities
- Oversees/monitors the operation of the Chiller Plant during assigned shift. Ensures the systems are operating at best possible performance levels.
- Performs regular maintenance/repairs to the Chiller Plant such as appropriate during shift reporting larger/ more complicated needs to the Forman or Power Plant Engineer I for action by the maintenance crew.
- Assists the maintenance/repair crew with scheduled and emergency repairs to the boilers generators chillers and related Facilities Management equipment.
- Ensures that assigned areas are operating within all applicable Hospital federal and local governing codes standards and regulations including but not limited to: OSHA NFPA The Joint Commission and Fire and Life Safety practices.
- Learns and remains current with the latest applicable federal and local governing codes standards and regulations regarding fire safety plumbing electrical and plant operations including but not limited to: OSHA NFPA The Joint Commission ASHRAE ANSI DCRA D.C. Fire & Safety Codes and the Hospital's Fire and Life Safety practices.
Minimal Qualifications
Education
- High School Diploma or GED required or
- Trade/vocational school graduate or equivalent with courses in chemistry physics and/or mathematics and such training as to be able to read: layout diagrams blueprints mechanical drawings work sketches etc. preferred
Experience
- completion of an approved apprentice training program required
Licenses and Certifications
- Must have a current D.C. Third Class Operating License required and
- current CFC License. required
Knowledge Skills and Abilities
- Familiarity with the latest applicable codes standards and regulations including but not limited to: OSHA NFPA The Joint Commission and Fire and Life Safety practices.
General Summary of Position
Oversees the operation of the Boilers and Chiller Plant and associated equipment ensuring the efficient operation during assigned shift. May be required to lead or assist with regular maintenance or emergency repairs to the boilers chillers and/or related equipment.
Primary Duties and Responsibilities
* Oversees/monitors the operation of the Chiller Plant during assigned shift. Ensures the systems are operating at best possible performance levels.
* Performs regular maintenance/repairs to the Chiller Plant such as appropriate during shift reporting larger/ more complicated needs to the Forman or Power Plant Engineer I for action by the maintenance crew.
* Assists the maintenance/repair crew with scheduled and emergency repairs to the boilers generators chillers and related Facilities Management equipment.
* Ensures that assigned areas are operating within all applicable Hospital federal and local governing codes standards and regulations including but not limited to: OSHA NFPA The Joint Commission and Fire and Life Safety practices.
* Learns and remains current with the latest applicable federal and local governing codes standards and regulations regarding fire safety plumbing electrical and plant operations including but not limited to: OSHA NFPA The Joint Commission ASHRAE ANSI DCRA D.C. Fire & Safety Codes and the Hospital's Fire and Life Safety practices.
Minimal Qualifications
Education
* High School Diploma or GED required or
* Trade/vocational school graduate or equivalent with courses in chemistry physics and/or mathematics and such training as to be able to read: layout diagrams blueprints mechanical drawings work sketches etc. preferred
Experience
* completion of an approved apprentice training program required
Licenses and Certifications
* Must have a current D.C. Third Class Operating License required and
* current CFC License. required
Knowledge Skills and Abilities
* Familiarity with the latest applicable codes standards and regulations including but not limited to: OSHA NFPA The Joint Commission and Fire and Life Safety practices.
This position has a hiring range of : USD $31.28 - USD $56.39 /Hr.
About the Company
Mesavita Engineering is an agile and innovative small business providing technical expertise to the U.S. Intelligence community. When you look closer though, you’ll find something truly special. We’re a close knit team who takes pride in the work we do for our country and are building this company together to be part of something bigger and better than ourselves. This inclusive culture thrives at Mesavita, where you’ll find humble leaders, compassionate peers, and a relaxed atmosphere that encourages everyone to be their best while having a lot of fun along the way.
About the Role
Provide customer support for HPC software to enable High Performance Computers to continue to run in operations, and support the range of UNIX, LINUX, Windows Systems, desktop applications, servers, and networks required in support of the mission.
Skills and Qualifications
- Must have TS/SCI with FS poly
- Structured troubleshooting skills
- System installation
- Working with HPC GOTS scheduler and resource management software
- Configuration Management tools.
- Linux Shell scripting
- Object Oriented Programming Language (C, C++, Java)
- Python Programming
- GCC compiler
- Multi-threaded software
- Parallel processing
- CORBA, J2EE
- Perl or JavaScript
- Working knowledge of
Benefits and Compensation Package
In addition to a competitive salary, Mesavita offers a comprehensive benefits package, which includes:
12% 401(k) contribution (not a match), which you are vested in immediately
Free medical benefits through CareFirst for you and your family
Vision and Dental Insurance
STD, LTD, Life coverage 100% paid for by Mesavita
$5,000 Education, Training, and Technology budget
5 days Paid Parental Leave
Lucrative Referral Bonus Program
For a full list of benefits, please visit will be commensurate with experience.
Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.
Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.
What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.
Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.
Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.
Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.
Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.
Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.
Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.
Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.
Specific options depend on the Sailor's status, training, and current Navy policy.
Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.
Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.
Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.
Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.
Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.
It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.
Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.
Lead the Land. Shape Communities. Drive Growth.
We are seeking an accomplished Land Development Manager to take the lead on some of our most complex and high‑profile land development projects across multiple communities and jurisdictions. This is a high‑impact leadership role for a seasoned professional who thrives at the intersection of strategy, technical execution, and financial performance.
In this role, you’ll guide projects from early acquisition support through entitlement, design, construction, and bond release, serving as a trusted advisor to executive leadership, Land Acquisition, and Community Builders. You’ll have the autonomy, authority, and visibility to truly shape how and where our communities come to life.
If you’re driven by building something lasting, solving complex challenges, and leading with confidence—this is your opportunity.
What You’ll Do
Strategic Leadership & Portfolio Ownership
- Lead a diverse portfolio of land development projects from due diligence to final delivery.
- Shape and execute regional land development strategies that directly support business growth.
- Partner closely with executive leadership on acquisition strategy, feasibility analysis, and risk management.
Entitlements, Due Diligence & Regulatory Leadership
- Drive entitlement processing, zoning approvals, and permitting across multiple jurisdictions.
- Lead site feasibility analyses, due diligence efforts, and initial site visits for prospective acquisitions.
- Actively participate in Site Investigation Teams, supporting Land Acquisition Managers and Legal Counsel.
- Represent the company at public hearings, agency meetings, and stakeholder engagements.
Design, Consultant & Contract Excellence
- Select, negotiate, and manage engineers, architects, consultants, contractors, and vendors.
- Lead RFP development, bid evaluations, and contract negotiations for professional and construction services.
- Review and approve technical plans, reports, and construction documents prior to agency submission.
- Establish and uphold regional development standards, construction guidelines, and approved consultant lists.
Construction & Infrastructure Execution
- Direct site development activities including roads, utilities, stormwater systems, grading, erosion control, landscaping, and amenities.
- Oversee bid package preparation and contractor selection with an eye for quality and value.
- Ensure construction meets approved plans, schedules, safety requirements, and quality standards.
- Resolve complex field and constructability challenges while evaluating innovative solutions.
Financial Stewardship & Value Creation
- Lead development of detailed land development budgets and cost estimates.
- Monitor financial performance, cash flow, and risk exposure across the project portfolio.
- Identify and implement value‑engineering and cost‑saving opportunities.
- Deliver clear, timely budget updates and construction forecasts to Area Presidents and Community Builders.
Risk, Environmental & Sustainability Leadership
- Identify development risks early and implement effective mitigation strategies.
- Oversee environmental due diligence and ensure regulatory compliance.
- Champion sustainable and environmentally responsible development practices.
Cross‑Functional Leadership & Influence
- Collaborate seamlessly with Land Acquisition, Construction, Finance, Legal, and Community Builders.
- Review and approve planning and development invoices with financial precision.
- Support continuous improvement initiatives and best‑practice development.
- Serve as an internal thought leader on land development trends and market conditions.
What You Bring
Experience & Education
- Bachelor’s degree in Civil Engineering, Construction Management, Real Estate Development, or a related field (or equivalent experience).
- 5+ years of progressive experience in land development, entitlement management, or site construction.
- Proven success managing multiple complex projects and cross‑functional teams.
Skills That Set You Apart
- Deep expertise in land development processes, municipal approvals, and construction practices.
- Strong financial acumen with hands‑on experience in budgeting, estimating, bidding, and contracts.
- Confident leader with exceptional negotiation and decision‑making skills.
- Ability to manage competing priorities across jurisdictions, stakeholders, and timelines.
Why You’ll Love Working Here
- A leadership role with real influence on land acquisition and development strategy
- High‑impact projects that shape communities and drive company growth
- Collaborative, executive‑engaged culture where your expertise is valued
- Competitive compensation and comprehensive benefits
Position Description
Ryder is hiring an experienced Mid-Level Diesel Technicianin Annapolis Junction, Maryland — offering weekly pay, excellent benefits, and a Technician career you can feel good about.
Hear it from a Ryder Technician Employee Here:
- Hourly Pay: $27.00 per hour
- Certification Bonus of $100 for each New ASE Certification Obtained up to $700
- Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year
- Schedule: Monday–Friday Weekends OFF
- Hours: Second Shift 1:00 pm – 9:30 pm
We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles.
Apply Here with Ryder Today
Spots are filling fast — click apply now to secure your spot.
Questions? Call Dominique or text “Annapolis T2” to 9 to speak with your recruiter today.
All the benefits you expect — without the wait.
- Medical, Dental, Vision after 30 days
- 80 hours PTO your first year, starting Day 1
- Yearly merit pay increases
- 401 (k) company match
- PPE, uniforms, and boot allowance
- Build your skills - paid training
- Safety‑first workplace & State-of-the-art equipment
- Top Tech Competition: Earn $250 – $50,000 per year
- U.S. military veterans - extra paid day off
- 15% company stock discount
- Up to $5,000 in Tech tuition repayment
- 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure)
- Employee discounts on tools, vehicles, travel, tech & more
Click Here to See All Ryder Careers:
We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday
Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!
EEO/AA/Female/Minority/Disabled/Veteran
Requirements
- High school diploma or equivalent preferred
- Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred
- Basic tools, required
- Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:
- Routine preventative maintenance, which should include oil changes, brake and tire work, required
- Two (2) years or more of a combination of classroom training and work experience in required experience, preferred
- Valid Commercial Driver License (CDL) CLASS A,preferred
- This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
- Must be able to obtain CDL within 6 months after hire
- Pass a Ryder Drug Test
- Pass a DOT physical
- Pass a Ryder road test
- Pass a Ryder Background and Motor vehicle check including drug and alcohol verification from previous employers for the last 3 years
Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.
Responsibilities
- Performs vehicle maintenance and repair duties
- Performs standard vehicle maintenance
- Performs standard component inspections and repairs
- Performs preventive maintenance
- Diagnoses standard mechanical and electronic problems, utilizing diagnostic computer when applicable
- Identifies root cause of basic failures/conditions and perform repairs as required
- Replaces defective components as instructed
- Performs facility maintenance duties
- Interacts with customers/drivers to properly determine nature of complaint once assigned a task
- Utilizes key functions of Shop Management System and electronic documentation available
- Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT)
- Performs other support duties as required to support operations. These could include but are not limited to Service Island support
Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.
Posted Date 1 week ago (3/9/2026 3:00 PM)
Requisition ID 2
Location (Posting Location) : State/Province MD
Location (Posting Location) : City ANNAPOLIS JUNCTION
Location (Posting Location) : Postal Code 20701
Category Technicians/Service Employees4
Employment Type Regular-Full time
Travel Requirements 0-10%
Position Code 1000120
Min Pay USD $27.00/Hr.
Max Pay USD $27.00/Hr.
**Required : Active TS-Clearance / 8+ Years Configuration Management
** Overview: Lead configuration management processes across the organization, ensuring alignment with strategic goals.
Develop and maintain a comprehensive configuration management plan, oversee change request tracking and reporting, and ensure effective communication of all modifications.
Drive collaboration across teams and maintain accurate documentation.
Other Job Specific Skills: Experience managing complex IT projects in a fast-paced environment Knowledge and understanding of software configuration management concepts, goals, benefits, and standard strategies to achieve those goals.
Strong written and verbal communication skills.
Experience with systems administration and software development.
Experience working with development teams and project managers to develop and maintain configuration baselines (development, test, production, etc.) supporting complex systems and project engineering development and support models.
Possess excellent customer-service oriented skills with a teamwork mentality.
Experience with a CM tool such as ServiceNow, CLEARCASE, RAZOR, or Team Foundation Server (TFS).
Ability to communicate with key stakeholders.
Knowledge of System Development Life Cycle (SDLC) methodologies and disciplines.
Experience with ITIL, IC Agile or other process improvement methodologies preferred.
Strong experience in requirements gathering.
Must be detail oriented, analytical, and self-directed to make decisions supported by thorough data analysis.
Experience managing a team and the ability to form strong relationships within a matrix organization at all levels.
Minimum Qualification Requirements: US Citizen with a Bachelor’s Degree or equivalent relevant experience 8+ years in Configuration Management 5+ years developing and implementing staff training Strong documentation and process improvement skills Current Top Secret clearance is required.
Preferred Qualifications: PMP certification MBA #cjpost Supporting emergency preparedness and management readiness Lead emergency preparedness and contingency planning efforts Prepared for emergency or disaster events Identify and resolve emergency response program issues Serve as emergency management specialist in providing logistical and coordination support for emergency response activities Update the emergency management action plan Designing and implementing emergency plans Ensure emergency preparedness associated technologies are fully operationalized Manage the performance and oversight of emergency preparedness and management programs Write and maintain emergency plans and standard operation procedures for department operations during emergency or disaster events Respond to and direct emergency management Responding to a major emergency Ensure compliance with federal and state emergency preparedness and management regulations and other requirements for operations Support the preparedness and response efforts Serve as point of contact for other emergency response agencies Manage, plan, and conduct emergency response training and exercises Administer safety, disaster and emergency preparedness and planning to address all hazards Maintain readiness of the emergency operations center for response to emergencies or disaster events Participate in exercises to test emergency plans and procedures Creating and maintaining department's emergency management plans such as emergency response plans, site specific emergency action plans, business continuity plans, hazard mitigation plans, and drought
*At Securian Financial the internal position title isEngineering Senior Analyst or Engineering Consultant. The title and salary will be determined based on experience and applied skills.*
Position Summary:
Are you a hands-on engineer who enjoys designing, building, and supporting modern communication platforms? Do you like solving complex problems and working with teams that move quickly from idea to delivery? This role offers the opportunity to make an immediate impact.
As a member of the Telephony and Contact Center Technologies team, you will design, engineer, implement, and support Securian's enterprise telephony and contact center platforms. This role is focused on delivering secure, scalable, cloud-first communication solutions using RingCentral, NiCE CXone, and Cyara.
You will work closely with Contact Center Operations, Agile delivery teams, and technology partners to continuously improve customer and associate experiences across the enterprise.
Responsibilities include but not limited to:
Design, engineer, implement, and support enterprise UCaaS and CCaaS platforms
Provide daily operational support for cloud-based telephony, unified communications, SIP services, and IVR solutions
Qualifications:
Hands-on experience engineering and supporting cloud-based telephony or contact center platforms
Strong understanding of VoIP technologies, SIP, and call routing concepts
RingCentral and RingCentral Contact Center engineering
NiCE inContact / CXone administration and development
Cyara or similar modern telephony orchestration platforms
Experience designing and supporting UCaaS and CCaaS (including IVRs and contact center workflows) solutions in large enterprise environments
Solid knowledge of networking concepts related to real-time communications
Preferred Qualifications:
Supporting remote contact center agents
REST API integrations and automation
Scripting using PowerShell or Python
Workforce management, call recording, or speech technologies
PSTN carrier and phone number lifecycle management
This role plays a critical part in modernizing Securian's communication platforms and ensuring reliable, scalable experiences for customers and associates. You will have the opportunity to influence technical direction and deliver compelling solutions that matter.
#LI-Hybrid**This position willhave a hybrid working arrangement.**
Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. Ifyou'reina commutable distance (90 minutes)you'lljoin us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.
The estimated base pay range for this job is:
$72,000.00 - $134,000.00Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.
Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:
Paid time off:
We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.
Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.
Holidays: Securian provides nine company paid holidays.
Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.
Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.
Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.
Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:
Mental Wellness and Disability
Pride at Securian Financial
Securian Young Professionals Network
Securian Multicultural Network
Securian Women and Allies Network
Servicemember Associate Resource Group
For more information regarding Securian's benefits, please review our Benefits page.
This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.
Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).
To view our privacy statement click here
To view our legal statement click here
Remote working/work at home options are available for this role.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
Mechanical Design Engineering
Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
8 years' experience in mechanical design and integration of mission-critical systems.
~ Proven track record of successful system designs and implementations in a relevant industry
~ Strong understanding of mechanical systems, integration strategy, and system coordination
~ Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
~ Master’s Degree in Mechanical Engineering
~
Remote working/work at home options are available for this role.
*Securian Financial the internal position title is Engineering Sr Analyst or Engineering Consultant. Title and salary will be determined based on applied skills.*
Position Summary:
Join theEnterprise Partner Solutions (EPS)team as aLicensing and Compensation Engineer, where you'll drive innovation in partner experience using cutting-edge SAP technologies. This team envisions a future where every financial producer is empowered from day one through intuitive, reliable, and scalable technology. Our engineering team is committed to transforming the producer experience by delivering back-end systems that simplify onboarding, ensure compliance in licensing, and guarantee timely and accurate compensation. We strive to be the trusted backbone of producer operations, enabling our company to grow with confidence and integrity. If you're passionate about engineering solutions that make a measurable impact, this is your opportunity to shape the future of partner engagement at scale.
Responsibilities include but not limited to:
Support and maintain SAP technologies related to partner compensation and licensing, including APM (ICM), ALM, OK2, and Advanced Workflow.
Perform analysis, design, development, and integration on medium to high level complexity assignments.
Develop and support automation capabilities through webservices and APIs.
Troubleshoot and resolve incidents across the licensing and compensation platform, including integrations with internal and external systems.
Collaborate with product analysts, quality engineers, and business stakeholders to deliver enhancements and ensure platform stability.
Analyze job failures, support tickets, and backlog stories to identify trends and drive continuous improvement.
Participate in Agile ceremonies and contribute to sprint planning, story refinement, and retrospectives.
Document technical processes and contribute to knowledge sharing across the EPS team.
Qualifications:
Bachelor's degree in Computer Science, Information Systems, or related field, or equivalent experience.
3+ years of experience supporting SAP technologies, preferably in compensation or licensing domains.
Familiarity with SAP ICM/APM and ALM modules.
Strong problem-solving skills and ability to manage multiple priorities.
Excellent communication skills and ability to work cross-functionally.
Experience with Agile methodologies and DevOps practices is a plus.
Preferred Qualifications:
SAP Certification in relevant Modules
Development Languages: Java, Groovy, SQL, Git, IntelliJ, webservices
Understanding of compensation payment structures for agents and familiarity with licensing and regulatory compliance frameworks governing producer eligibility to sell products.
Ability to work independently and as part of a collaborative team.
Commitment to continuous learning and process improvement.
#LI-hybrid **This position will be in a hybrid working arrangement.**
Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes) you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.
The estimated base pay range for this job is:
$72,000.00 - $134,000.00Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.
Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:
Paid time off:
We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.
Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.
Holidays: Securian provides nine company paid holidays.
Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.
Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.
Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.
Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:
Mental Wellness and Disability
Pride at Securian Financial
Securian Young Professionals Network
Securian Multicultural Network
Securian Women and Allies Network
Servicemember Associate Resource Group
For more information regarding Securian's benefits, please review our Benefits page.
This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.
Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).
To view our privacy statement click here
To view our legal statement click here
Remote working/work at home options are available for this role.
How will you make an impact?
We are looking for a Principal Thermal Rack Engineer within the Intelligent Infrastructure Segment to drive advanced cooling solutions for high-performance computing systems. This role involves incorporating thermal components such as direct liquid cooling (DLC) systems, coolant distribution units (CDUs), and manifolds into network and server racks (EIA 19” and ORv3). You will leverage CFD tools to perform rack and system-level thermal and fluid analysis, ensuring optimal flow distribution, pressure drop, and temperature performance. Additionally, you will create 3D CAD designs for seamless hardware integration, lead validation testing, and resolve thermal or flow issues through root cause analysis and corrective actions. Collaboration with cross-functional teams, customers, and global vendors is essential to align thermal architectures with overall system design and international standards.
What will you do?
- Lead the end-to-end integration and testing of rack thermal solutions, including liquid cooling systems in varying form factors and product lines.
- Use CFD tools (FloTherm or Macroflow) to perform switch, rack, and system-level thermal/fluid analysis (flow distribution, pressure drop, and temperature profiling).
- Design and optimize thermal components using 3D CAD (Creo or SolidWorks) to support seamless hardware integration and testing.
- Participate in customer engagements and site visits to understand and document deployment constraints and gather feedback for design improvements.
- Partner with factory teams to ensure racks are built with proper airflow, hose routing, and thermal safeguards, while establishing best practices that improve build consistency across deployments.
- Collaborate with Architects/Compliance/Reliability and global vendors to align thermal architectures with total system design and international data center/thermal/mechanical standards (e.g., UL, OCP, ASHRAE, ISTA, ASTM, NEBS).
- Conduct thermal, mechanical, and reliability testing, analyzing airflow, coolant flow rates, pressure drops, and structural integrity to ensure compliance with the end-users’ specifications.
- Develop and maintain design documentation including BOMs, wetted materials compliance, test plans, and engineering change orders (ECOs).
- Manage relationships with mechanical/thermal component vendors to build out a robust partner ecosystem consisting of racks, CDUs, hoses, manifolds, QDs, and cold plates.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (e.g., in-row cooling, in-rack cooling, rear door heat exchangers).
- Conduct root cause analysis and corrective actions for mechanical and thermal failures or field issues.
- May perform other duties and responsibilities as assigned.
How will you get here?
Education:
- Bachelor’s Degree in Mechanical/Thermal Engineering, Systems Engineering, or related field is required
Experience:
- Minimum of 7+ years of experience in thermal/mechanical systems integration
- 3+ years of specific experience in rack-scale thermal design and analysis
- Strong understanding of mechanical systems, integration strategies, and large-scale program management
- Familiarity with server design, heatsinks, cold plates, hoses, and blind-mate connectors
- Proficiency in CFD simulation (e.g. ANSYS, 6Sigma, etc.) and 3D modeling software (e.g. SolidWorks, Creo)
- Hands-on experience with thermal chambers, fans, and coolant
- Excellent English communication skills (verbal and written) with strong technical leadership capabilities
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Capable of assessing projects, articulating risks, and developing project milestones
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management and customers
- Capable of influencing others and sharing best practices
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering, Systems Engineering or related field is preferred
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license preferred.
- Hands-on experience with prototype fabrication and testing; experience working with global suppliers and contract manufacturers a plus.
About Jabil’s Intelligent Infrastructure Group:
- Headquartered in Austin, TX, with a flagship facility located near The Domain and the Austin FC stadium
- Growing rapidly, with a team of more than 100 employees in Austin (500+ worldwide) and significant expansion planned through 2026
- Generated over $12 billion in FY25 revenue, driven largely by partnerships with major hyperscale customers
- Delivers cutting‑edge engineering, supply chain, and manufacturing solutions that power the world's AI infrastructure and global data center ecosystems
As part of the total rewards package, this position is eligible for:
- Annual bonus opportunity
- Medical, dental, and vision insurance plans
- Paid time off (PTO)
- 4 weeks of paid parental leave
- 11 company-paid holidays (9 fixed holidays and 2 optional floating holidays), subject to change yearly
- 401(k) retirement plan
- Employee stock purchase plan
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title: Senior Engineer, Global Services
- Hybrid Location: Medina, NY Duration: 12 Months Hours: 9 AM
- 5 PM Flexible on availability to be on-site, with someone who can work 1-2 days per week, Open to relocation and considering senior candidates.
must have the ability to travel Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: Applies a solid understanding of engineering and problem-solving theories/practices toward the development of new or enhanced products or processes.
Creates service deliverables and infrastructure required to support initial product launch and lifecycle management.
Capable of designing machine tooling, jigs, fixtures, gauges and equipment used in the servicing process.
Capable of checking designs and drawings against general standards, design requirements, geometric tolerances, drafting practices and the manufacturing process involved.
The work of the individual should be highly creative, of high quality and offer wide latitude for independent judgment and perception with a minimal amount of supervision.
Need not have any tools/ software experience, CAD would be a plus.
Medical background will be a plus any regulatory background will be good.
Someone who was worked with Engineers, multitasking will be a great fit.
Ambiguity, adapt, multi-task and works with lead engineer in projects.
Support the team of Product core and represent service operations and supply chain.
Will be in charge of Service change implementation.
Focuses on design changes, process changes.
Collaborates with Service Process, Engineers, Technicians, impact of changes.
Oversees Document Revision, Handle Change control, mentored and directed by team to tackle multiple product and project Essential Duties and Responsibilities: 1.
Creates new product development and lifecycle management service deliverables throughout the product lifecycle for medical device products involving hardware.
2.
Supports new product platform releases.
Develops and implements service training, test equipment, tools, spare parts, and service manuals / instructions.
3.
Evaluates / makes recommendations on product releases related to design for serviceability.
Creates (or modifies existing) servicing processes and manuals to support repair or refurbishment of fielded product at multiple global sites or in the field.
4.
Works closely with design team to select, develop, and implement technologies across all medical device development programs.
5.
Analyzes key servicing metrics to identify and implement opportunities for improvement in service process quality, cost, or product reliability.
6.
Coordinates information flow between corporate and local/regional teams.
7.
Owns Corrective and Preventive Actions related to the product(s) core team(s) supported, using sound root cause analysis.
8.
May represent Technical Services on new product development and/or lifecycle management core teams.
9.
May independently plan, schedule and lead cross-functional teams in detailed phases of the engineering work in a project.
10.
May approve the work of lower level engineers; may supervise other engineers or technicians Minimum Qualifications: 1.
Must be well versed in core engineering disciplines (e.g.
mechanical, electrical, software, systems engineering).
2.
Highly motivated self-starter who is able to work with minimal supervision.
3.
Must have good interpersonal and oral/written communication skills, good time management, and be capable of analyzing and solving technical problems through innovative thought and application of sound engineering principles and root cause analysis.
4.
Experience with change control methodologies and configuration management principles is a plus.
5.
Experience with test engineering and/or reliability engineering principles is a plus.
6.
Ability to exercise independent judgment and draw conclusions based on available information.
7.
Good understanding of GMP and quality system requirements.
Education and/or Experience: Bachelor's degree in a core engineering discipline (mechanical, electrical, software, systems, or mfg/process engineering) plus 3-5 years of experience.
Medical device experience or other regulated industry experience preferred.
Experience in the use of Lean Six Sigma tools highly desirable.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
GMP, Medical Device, Lean Six Sigma
Remote working/work at home options are available for this role.
