Engineering Structures Jobs in Benicia Solano County Ca Remote
459 positions found — Page 3
The Organization
Contra Costa Health (CCH) is an integrated public health system within Contra Costa County government responsible for the health and well-being of more than 1.1 million residents. As the County’s largest department, CCH employs approximately 5,500 staff and operates with an annual budget of approximately $4 billion.
CCH delivers care and services across a broad and highly integrated continuum spanning acute care, ambulatory services, managed care, behavioral health, public health, and community-based programs. Core components of the system include:
- Contra Costa Regional Medical Center (CCRMC), a 167-bed acute care hospital serving as the County’s primary safety-net hospital
- Nine community-based health centers and clinics, collectively providing more than 550,000 ambulatory visits annually
- Detention Health Services, providing 24/7 medical, mental health, and substance use services within County correctional facilities, ensuring continuity of care, medication management, crisis intervention, and coordinated discharge planning to support safe transition back to the community.
- Contra Costa Health Plan (CCHP), serving approximately 270,000 members across Medi-Cal, Medicare, and commercial lines of business and operating as the Single Plan Model for Medi-Cal managed care in the County
- Behavioral Health Services, delivering comprehensive mental health and substance use services
- Community Health and Safety divisions, including Public Health, Environmental Health, Emergency Medical Services, Hazardous Materials, Health, Housing & Homeless Services, and Community Response
The Position
Chief Financial Officer
Reporting to the Chief Executive Officer of Contra Costa Health, the Chief Financial Officer serves as the senior financial leader and strategic advisor for the department. The CFO is responsible for planning, organizing, and directing all financial strategy and operations, including budgeting, financial reporting, revenue cycle oversight, capital planning, and regulatory compliance.
The CFO leads the Finance Division of approximately 160 staff and provides fiscal leadership for an integrated public health system with an annual operating budget of approximately $4 billion.
Direct Reports:
- Three Deputy Chief Financial Officers (Hospital/Health Centers; Health Plan; Controller/General Programs)
- Assistant Director – Contracts/Procurement
- Assistant Director – Revenue Cycle (Position Under Development)
- Director of Patient Financial Services
- Director of Financial Counseling
Key Stakeholder Relationships:
The CFO works closely with the County Administrator’s Office, Auditor-Controller, Treasurer, Information Technology, Human Resources, Labor Relations, and the Board of Supervisors.
Experience/Qualifications
Education
- Possession of a master’s degree from an accredited college or university with a major in Business, Finance, Accounting, Public Administration, or a closely related field.
Experience
- Ten (10) years of full-time financial management experience in a healthcare environment, including at least five (5) years in an executive-level role within a large, diverse program or public agency providing healthcare to the public.
- Demonstrated experience in complex healthcare systems; experience spanning both delivery systems and managed care environments is strongly preferred.
- Knowledge of public reimbursement structures and fiscal strategy across funding streams, including Medi-Cal, Medicare, and supplemental funding programs.
- Experience operating in unionized environments and supporting labor negotiations through financial modeling and analysis.
- Strong financial planning, forecasting, and analytical expertise, including budget development, revenue cycle oversight, capital planning, and enterprise financial reporting.
- Experience leading enterprise financial systems modernization initiatives, including ERP optimization, cost accounting implementation, and large-scale operational system projects.
- Demonstrated project management capability involving complex, cross-functional initiatives.
Certifications (Must hold at least one within one (1) year of appointment)
- Certified Public Accountant (CPA) issued by the State of California
- Certified Health Financial Professional (CHFP) issued by the Healthcare Financial Management Association
- Certified Government Financial Manager (CGFM) issued by the Association of Government Accountants
- Certified Public Finance Officer (CPFO) issued by the Government Finance Officers Association
Licensure
- Valid California driver’s license (or ability to obtain).
Substitution for Education:
The qualifying Master’s degree may be substituted with both:
- Possession of a Bachelor’s degree from an accredited college or university in Public Health, Business or Public Administration, Social or Behavioral Sciences, Health Sciences, Social Work, Finance, Accounting, Architecture, Engineering, Construction/Project Management, Urban Planning, or Facilities Management; and
- A minimum of three (3) additional years of relevant work experience, including at least two (2) years in an executive-level role within a large, diverse program or public agency providing health or human services to the public.
Compensation
For the selected candidate, a complete and competitive compensation package will be offered which includes salary target of $434,126-$527,682 dependent upon experience, deferred compensation, a full suite of benefits, and up to $10k may be approved for relocation assistance on a case-by-case basis.
Mechanical Account Executive
Territory: Bay Area | Benicia-based | Biopharma, Commercial & Industrial Clients
I’m working with a well-established Northern California mechanical contractor known for delivering complex HVAC and piping solutions to biopharma, commercial, and industrial clients. With a strong reputation for technical expertise, safety, and long-term customer relationships, they continue to expand their footprint across the Bay Area.
They’re looking for a motivated Mechanical Account Executive to drive new business development and strategic growth. This role is ideal for someone with proven experience selling mechanical construction and service solutions who thrives in a performance-driven environment and understands how to navigate sophisticated facilities like biopharma and industrial plants.
What You’ll Be Doing:
- 100% Hunter role with strong account development expectations
- Target annual sales expectations of $1M–$1.5M
- Sell both service and installation projects
- Typical deal sizes:
- $1M+ capital projects
- $300K–$500K mid-sized projects
- Ongoing smaller service/retrofit work under $100K
- Develop relationships within biopharma, advanced manufacturing, commercial, and industrial facilities
- Identify opportunities involving chillers, boilers, air handlers, cooling towers, and heavy mechanical piping systems
- Partner closely with estimating, operations, and field teams to ensure smooth project execution
- Maintain accurate forecasting and pipeline reporting
- Build long-term strategic client partnerships, not just transactional sales
Must Haves:
- Proven experience selling mechanical construction or HVAC projects (must have mechanical systems selling experience)
- Background in commercial/industrial mechanical contracting
- Bonus: understanding of piping systems, hydronics, central plants, boilers, chillers, and air handling systems
- Experience selling into technical environments (biopharma or industrial highly preferred)
- Ability to independently prospect, qualify, and close mid-to-large mechanical deals
- Strong communication and relationship-building skills
- Valid driver’s license and ability to cover the Bay Area
What’s in It for You:
- Competitive base salary + strong commission structure OTE $120K - $150K+ First Year
- Established reputation and strong operations team to support your deals
- Long-term growth opportunity with a respected mechanical contractor
- Comprehensive benefits package
If you’re a mechanical sales professional who understands complex systems, can navigate technical buyers, and wants to sell meaningful projects in the Bay Area market — let’s connect.
- Architecture/Engineering/Construction!!! This Jobot Job is hosted by: Daylen Quichocho Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $85,000
- $120,000 per year A bit about us: We are a leading environmental and engineering solutions company with a strong commitment to sustainability and responsible resource management.
With a rich history dating back to our founding, we have established itself as a trusted partner for government agencies, private sector clients, and communities across the United States.
Our core focus is on providing innovative and cost-effective solutions to complex environmental challenges.
We specialize in remediation, environmental restoration, and engineering services, offering a comprehensive suite of services designed to protect and restore the environment.
Our multidisciplinary team of experts brings together diverse skills and experiences to deliver cutting-edge solutions that prioritize safety, sustainability, and regulatory compliance.
We have successfully completed numerous projects in diverse environments, including contaminated sites, hazardous waste management, and infrastructure development.
ERRG is known for its dedication to excellence, unwavering commitment to client satisfaction, and a deep understanding of environmental regulations and best practices.
Why join us? Medical Insurance! Dental Insurance! Life Insurance! 401(k) Plan! Paid Time Off (PTO)! Paid Holidays! New Client Referral Rewards! Job Details Minimum Requirements: Bachelor's degree or equivalent from an accredited institution.
5-8 years’ experience managing, drafting, reviewing and negotiating contract agreements Strong knowledge of construction contracting and subcontracting language Preferred Qualifications: Engineering or Construction Management related background Experience with U.S.
Government contracting to include Federal Acquisition Regulations (FAR) Experience with various contractual arrangements in prime and subcontractor roles Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
- Food Industry This Jobot Job is hosted by: Daylen Quichocho Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $40
- $50 per hour A bit about us: Step into a state-of-the-art manufacturing environment where innovation meets tradition.
For over a century, we’ve been crafting premium products across the U.S.
Today, we operate one of the most advanced facilities in the industry, processing hundreds of thousands of tons annually with cutting-edge automation and precision systems.
Why join us? Competitive hourly rate with overtime.
Direct-hire Incredible growth options for a leader in the food/beverage industry for over 100 years! Top Benefits in the industry Steady work 365 days a year Educational reimbursement State-of-the-art equipment Job Details Job Details We are seeking a highly skilled and experienced Maintenance Technician to join our dynamic manufacturing team.
This is an exciting opportunity to work in a fast-paced, high-tech environment, ensuring the smooth running of our advanced manufacturing equipment.
The successful candidate will be responsible for the maintenance, repair, and smooth operation of our manufacturing equipment, ensuring maximum productivity and minimal downtime.
This is a full-time, permanent position, offering competitive compensation and benefits.
Responsibilities The Permanent Maintenance Technician will be responsible for: 1.
Conducting regular inspections of machinery and equipment to identify and respond to signs of malfunction.
2.
Performing routine and preventative maintenance on machinery and production lines, ensuring they are in top working order.
3.
Troubleshooting and repairing mechanical and electrical faults in machinery and equipment.
4.
Reading and interpreting equipment manuals and work orders to perform required maintenance and service.
5.
Complying with safety regulations and maintaining a clean and orderly work area.
6.
Documenting and maintaining records of maintenance and repair work.
7.
Assisting in the installation of new machinery and equipment.
8.
Communicating with team members and management to ensure operations run smoothly.
9.
Participating in continuous improvement initiatives and suggesting ways to improve the efficiency and functionality of the equipment.
Qualifications The ideal candidate for the Permanent Maintenance Technician position will have: 1.
Minimum of 2 years of experience in a maintenance role within the food or packaging industries.
2.
Strong troubleshooting skills, with the ability to diagnose and repair a wide range of industrial equipment
- Sealers, glue machines, packaging equipment, automated conveyors, 3.
Proven experience in equipment maintenance, with a strong focus on preventive maintenance.
4.
Excellent mechanical and electrical skills, with a good understanding of the workings of industrial machinery and systems.
5.
The ability to read and understand manuals and schematics.
6.
A commitment to adhering to safety protocols and regulations at all times.
7.
Strong communication skills, with the ability to work effectively as part of a team and communicate with individuals at all levels.
8.
A proactive approach to work, with the ability to anticipate problems and take preventative action.
9.
The ability to work under pressure and manage multiple tasks simultaneously.
10.
A high school diploma or equivalent.
A relevant certification or associate degree in mechanical or electrical engineering is highly desirable.
.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $45
- $55 per hour A bit about us: Step into a state-of-the-art manufacturing environment where innovation meets tradition.
For over a century, we’ve been crafting premium products across the U.S.
Today, we operate one of the most advanced facilities in the industry, processing hundreds of thousands of tons annually with cutting-edge automation and precision systems.
Why join us? Competitive hourly rate with overtime No travel! Direct-hire Top notch health, dental, and vision insurance Stable, growth-oriented company culture with modernized facilities.
Opportunities for advancement and electrical training certifications.
Job Details We’re seeking a skilled Industrial Electrician to join a leading packaging manufacturer known for quality, innovation, and operational excellence.
This individual will play a critical role in maintaining, troubleshooting, and improving electrical systems across both production and facility operations.
The ideal candidate will have strong industrial electrical experience, a solid understanding of PLCs, and a proactive approach to safety and continuous improvement.
Key Responsibilities: Install, troubleshoot, and repair electrical systems, equipment, and components for production and facility operations.
Diagnose malfunctioning systems, apparatus, and components using test equipment and hand tools to locate the cause of breakdowns.
Perform preventive maintenance and reliability checks on motors, drives, conveyors, and other automated equipment.
Support PLC-controlled equipment by identifying and resolving electrical issues (basic programming or editing experience preferred).
Collaborate with maintenance, production, and engineering teams to minimize downtime and improve equipment performance.
Ensure compliance with all safety, environmental, and electrical codes (NEC, OSHA, NFPA 70E).
Maintain accurate documentation for maintenance records, wiring diagrams, and equipment changes.
Assist in facility-related electrical work including lighting, power distribution, and infrastructure support.
Qualifications: 3+ years of experience as an Industrial Electrician in a manufacturing, packaging, or food production environment.
Strong understanding of electrical theory, schematics, blueprints, and control systems.
Working knowledge of PLCs (Allen-Bradley, Siemens, or similar) — basic troubleshooting and programming a plus.
Proficient with electrical testing and diagnostic tools (multimeters, meggers, oscilloscopes, etc.).
Ability to work independently and respond to urgent maintenance issues effectively.
Flexibility to work all shifts and weekends Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
WHO WE ARE
Delta Engineers, Architects, & Surveyors (Delta) is a multidisciplinary AEC firm founded in upstate New York in 1976. Along with our corporate headquarters located near the intersection of Interstates 81, 86 and 88, Delta has additional offices across Central New York and Chevy Chase, MD, together with remote team members located across the US. We deliver engineering and architectural design services for multiple market sectors along with providing environmental, survey, landscape architecture, and ecological services to public and private clients located throughout the continental US. Delta team members take advantage of terrific opportunities to advance professionally in a supportive team-oriented culture while enjoying generous compensation and benefits package.
WHO WE NEED
We are seeking a versatile and team-oriented Structural Project Engineer in our Structural Team, ideally located in the Syracuse or Albany, NY area, or at our Endwell, NY office. Candidates located outside the designated office locations may qualify for full remote work, subject to company policy. The ideal candidate should have a Bachelor's Degree in Civil / Structural Engineering, with a minimum of 6 years of relevant experience. A PE is also required. Experience should include structural analysis, design, and detailing for concrete, steel, and aluminum structures. Experience with cable design is preferred.
The primary duties associated with this position include:
- The candidate should be proficient with the International Building Code (IBC); ASCE-7; ACI 318; ADM-2020; and AISC.
- Performing challenging 3-dimensional structural analyses and designs for a wide variety of clients using various state-of-the-art design software, including RISA 3D, SAP, RAM, and RISA Foundation.
- Responsible for serving as lead project engineer, i.e., taking responsibility for developing design, preparing detailed structural drawings using AutoCAD and REVIT, and specifications. This includes coordinating the work of junior team members and amongst other trades.
- Solving engineering problems using experience, judgment, and education and knowing when to ask for assistance when required.
- Write and review related reports for the services provided.
- Scoping projects and assisting project managers with proposal creation.
- Serving as a Quality Control reviewer for the designs of team members.
- Assisting the Team Leader in initiating, developing, and implementing continuous team improvement initiatives.
- Supporting structural work in our building projects within the Structural Facilities Group as workload warrants.
- Attending client meetings/presentations in the daytime or evenings.
- Communicating with client representatives, contractors, and suppliers.
- Participating in site visits/inspections/documentation during construction.
- Work on a variety of projects including schools, industrial facilities, commercial buildings, and governmental projects.
- This position requires an individual that has strong technical abilities with good organizational and communication skills, and the ability to work in a fast-paced market.
Additional duties will include preparing structural designs; prepare structural design summaries and detailed drawings using AutoCAD and REVIT; consider alternate designs and value engineering; and meeting scheduled project deadlines.
Delta is driven to exceed our clients' expectations on every project. Accordingly, the successful applicant for this position must be willing to occasionally work adjusted hours/overtime.
WHAT WE OFFER
Hiring Salary Range: $80,000-$110,000 (Salary to be determined by the applicant's education, experience, knowledge, skills, and abilities along with an internal equity and alignment with market area data.)
The following are a few of the benefits that we offer:
- Paid Holidays, Vacation, Sick time
- Health and Dental Insurance
- Optional Vision, LTD and Term Life Insurance
- Enhanced Short Term Disability
- 401K Retirement Plan
- Tuition Assistance Program
- Professional Licensing Reimbursement
- Recruitment Bonus Program
We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.
Remote working/work at home options are available for this role.
*At Securian Financial the internal position title isEngineering Senior Analyst or Engineering Consultant. The title and salary will be determined based on experience and applied skills.*
Position Summary:
Are you a hands-on engineer who enjoys designing, building, and supporting modern communication platforms? Do you like solving complex problems and working with teams that move quickly from idea to delivery? This role offers the opportunity to make an immediate impact.
As a member of the Telephony and Contact Center Technologies team, you will design, engineer, implement, and support Securian's enterprise telephony and contact center platforms. This role is focused on delivering secure, scalable, cloud-first communication solutions using RingCentral, NiCE CXone, and Cyara.
You will work closely with Contact Center Operations, Agile delivery teams, and technology partners to continuously improve customer and associate experiences across the enterprise.
Responsibilities include but not limited to:
Design, engineer, implement, and support enterprise UCaaS and CCaaS platforms
Provide daily operational support for cloud-based telephony, unified communications, SIP services, and IVR solutions
Qualifications:
Hands-on experience engineering and supporting cloud-based telephony or contact center platforms
Strong understanding of VoIP technologies, SIP, and call routing concepts
RingCentral and RingCentral Contact Center engineering
NiCE inContact / CXone administration and development
Cyara or similar modern telephony orchestration platforms
Experience designing and supporting UCaaS and CCaaS (including IVRs and contact center workflows) solutions in large enterprise environments
Solid knowledge of networking concepts related to real-time communications
Preferred Qualifications:
Supporting remote contact center agents
REST API integrations and automation
Scripting using PowerShell or Python
Workforce management, call recording, or speech technologies
PSTN carrier and phone number lifecycle management
This role plays a critical part in modernizing Securian's communication platforms and ensuring reliable, scalable experiences for customers and associates. You will have the opportunity to influence technical direction and deliver compelling solutions that matter.
#LI-Hybrid**This position willhave a hybrid working arrangement.**
Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. Ifyou'reina commutable distance (90 minutes)you'lljoin us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.
The estimated base pay range for this job is:
$72,000.00 - $134,000.00Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.
Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:
Paid time off:
We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.
Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.
Holidays: Securian provides nine company paid holidays.
Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.
Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.
Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.
Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:
Mental Wellness and Disability
Pride at Securian Financial
Securian Young Professionals Network
Securian Multicultural Network
Securian Women and Allies Network
Servicemember Associate Resource Group
For more information regarding Securian's benefits, please review our Benefits page.
This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.
Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).
To view our privacy statement click here
To view our legal statement click here
Remote working/work at home options are available for this role.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Remote working/work at home options are available for this role.
