Engineering Structures Jobs in Arizona

MD/DO
- Hospitalist Tucson VAMC Tucson
- Southern Arizona VA System Tucson VAMC The Southern Arizona VA Health Care System (SAVAHCS) located in Tucson AZ serves over 171,000 Veterans located in eight counties in Southern Arizona and one county in Western New Mexico.

SAVAHCS is a 295-bed hospital providing primary care and sub-specialty health care in numerous medical areas for eligible Veterans.

SAVAHCS also provides our Veterans with quality care at our seven Community Based Outpatient Clinics located at Safford, Casa Grande, Sierra Vista, Yuma, Green Valley, Northwest and Southeast Tucson.

Facility Facts and Specifics The VA Medical Center located at Tucson Arizona is the "Flagship" for the Southern Arizona VA Health Care System (SAVAHCS), which serves over 170,000 veterans located in eight counties in Southern Arizona and one county in Western New Mexico.

This 295-bed hospital provides training, primary care and sub-specialty health care in numerous medical areas for eligible Veterans.

SAVAHCS has been serving America's heroes our Veterans since its dedication on October 13, 1928.

SAVAHCS has affiliations with over 67 academic institutions and plays a vital role in Arizona health care education as the principle affiliate with the University of Arizona's Colleges of Medicine, Nursing and Pharmacy.

Each year over 900 physicians, nurses and other health care professionals from educational institutions across the country receive training at SAVAHCS.

Virtually all SAVAHCS staff physicians hold faculty appointments at the University Of Arizona College Of Medicine.

University of Arizona College of Nursing students consistently rate SAVAHCS as their best teaching experience.

SAVAHCS has specialized and numerous unique treatment programs to better serve its patients such as: The South Western Blind Rehabilitation Center, The Community Living Center, which provides specialty care as Rehabilitation, Geropsychiatric, Interim, Long Term, Hospice/Palliative, and Respite Care.

SAVAHCS employs over 2,500 health care professionals and support staff.

SAVAHCS' economic importance to the community was recently recognized by the Arizona Daily Star as one of the 16th largest employers in Southern Arizona.

Last year SAVAHCS treated over 8,700 inpatients, performed over 5,100 surgeries and completed an excess of 680,000 outpatient visits.

Requirements (duties include, but are not limited to) Evaluation, treatment and management of minor wound care, respiratory illness, gastrointestinal illness, burns that do not require specialty care, musculoskeletal trauma, dermatological illness, basic ENT evaluation that are within the purview of family medicine/family practice physician, eye and urological problems.

Evaluation, treatment and management of minor procedures such as local infiltration anesthesia, incision and drainage, simple laceration repair, nail trephination, electro-coagulation, nasal cautery, gastric lavage, bladder catheterization, peripheral venous line insertion, and spinal immobilization.

Evaluation, treatment and management of abdominal and gastrointestinal disorders of the esophagus, stomach, small bowel and colon rectum and anus, liver and biliary tree and pancreas.

Evaluation, treatment and management of cardiovascular disorders involving cardiac failure, differential diagnosis of chest pain, cardiac structural disorders, cardiac rhythm and conduction defects, pericardial disorders, disease of peripheral arteries and veins, shock, and cutaneous disorders.

Evaluation, treatment and management of end of life care (Advanced directives/ Palliative care) Evaluation, treatment and management of emergent disorders caused by antigens, organisms and other foreign substances such as reactions of hypersensitivity; reactions from venoms, bites and stings; reactions caused by infectious agents; disorders due to chemical, drug and physical agents; and disorders associated with the environment to include barotraumas, near drowning, electrical injury, hypothermia and radiation injury.

Evaluation, treatment and management of emergent disorders of the hematopoietic system such as anemia, coagulopathy and management of acute neoplastic disease complication.

Evaluation, treatment and management of emergent disorders of endocrine, metabolic and nutritional natures relating to acid-base disturbances, adrenal, parathyroid and thyroid disturbances.

Evaluation, emergent treatment and management of emergent disorders of the head and neck involving the ears, nose, oral cavity, larynx/trachea, face and vestibular system.

Evaluation, treatment and management of post-emergent disorders of the eye involving the lids and lachrymal apparatus conjunctiva, cornea, sclera.

Evaluation, treatment and management of post-emergent disorders of the musculoskeletal system involving shoulder girdle, upper extremity and hand, lower extremity and foot, thorax and vertebrae and arthopathies.

Evaluation, treatment and management of post-emergent disorders (including trauma) of the nervous system including cerebral edema, coma, cranial nerve disease, cerebro-vascular disease and infection.

Evaluation, treatment and management of post-emergent respiratory disorders including pulmonary, infection, trauma, neoplasia, metabolic and complications of cardiovascular disease.

Initial evaluation, treatment and management of renal and urologic disorders including acute/chronic renal failure, infections, obstructive uropathy and hematuria and trauma.

Evaluation, treatment and management of OB/GYN disorders such as pelvic pain, ovarian cysts, and infection.

Suture minor lacerations.

Qualifications Must have graduated from an accredited Doctor o

Project Executive – Industrial (PV Manufacturing & Chemical Plants) | Arizona | General Contractor

A leading General Contractor is seeking a Project Executive to lead the delivery of large-scale PV manufacturing facilities and chemical processing plants across Arizona. This is a critical leadership role focused on complex, high-value industrial projects supporting the growth of clean energy manufacturing and advanced process industries.

The Role

As Project Executive, you will oversee multiple ground-up industrial projects from early-stage development through commissioning and start-up. You will serve as the primary client interface while ensuring exceptional performance across safety, schedule, quality, and financial outcomes.

Key Responsibilities

• Provide executive oversight of PV manufacturing and chemical plant projects ranging from $100M to $1B+
• Lead preconstruction strategy, including cost planning, value engineering, constructability, and procurement of long-lead/process equipment
• Oversee delivery of complex process systems, including cleanrooms, chemical processing lines, high-purity piping, and specialty utilities
• Drive project execution excellence, ensuring alignment with aggressive schedules and operational readiness milestones
• Maintain and grow client relationships with manufacturers, developers, and EPC partners
• Manage P&L performance, contracts, risk mitigation, and change management
• Build, mentor, and lead high-performing project teams across multiple concurrent projects
• Support business development and market growth within industrial, energy, and advanced manufacturing sectors

Requirements

• 15–20+ years of experience with a General Contractor, focused on industrial, manufacturing, or chemical/process facilities
• Proven track record delivering PV manufacturing, semiconductor, battery, or chemical plant projects
• Strong knowledge of process engineering coordination, MEP systems, and specialty installations (cleanrooms, high-purity systems, hazardous materials handling)
• Experience with Design-Build, EPC, and GMP delivery models
• Excellent leadership, client management, and commercial acumen
• Bachelor’s degree in Construction Management, Engineering, or related field (preferred)

Why Join

• Lead flagship industrial projects at the forefront of clean energy and advanced manufacturing
• Join a top-tier GC with a strong pipeline across Arizona and the Southwest
• Play a key role in expanding PV manufacturing and chemical processing capabilities in the U.S.
• Competitive compensation, executive-level benefits, and long-term career growth

This is a high-impact opportunity for an experienced Project Executive to shape and deliver next-generation industrial facilities in one of the fastest-growing markets in the country.

Position Title: Senior Engineer (Transportation Safety Policy Program)

Post-date: March 18, 2026

Closes: The position is open until filled.

Status: Full-Time, Exempt

Salary: $89,167 - $133,750

Location: Maricopa Association of Governments, downtown Phoenix, Arizona.

Note: A minimum of three days per week in office is required.

About MAG

The Maricopa Association of Governments (MAG) is a group of local governments working together on issues that touch the lives of every resident. We are a regional planning agency that develops solutions in areas such as transportation, environmental and air quality, and human services.

MAG serves a thriving region of 5 million people. Our members include 27 cities and towns, three Native nations, and Maricopa and Pinal counties. Our planning area encompasses more than 10,000 square miles. MAG is the council of governments and the designated metropolitan planning organization for transportation planning for the greater Phoenix metropolitan area.

Visit to learn more.

MAG is a great place to work. We offer a competitive salary, excellent benefits, and a collaborative environment where employee contributions make a real impact.

Your Team

MAG’s Safety Policy Program elevates safety as a core priority, ensuring it is embedded in transportation planning and implementation across the agency and throughout the region. The Safety Team strengthens regional transportation outcomes by conducting studies, identifying emerging needs, evaluating system performance, refining safety processes, and coordinating priorities both within MAG and in collaboration with partner agencies and stakeholders.

The Position

MAG is seeking a qualified transportation engineer to support the activities related to the management and implementation of the Safety Policy Program.

Duties include but are not limited to:

• Managing scopes, schedules and budgets of transportation planning studies.
• Assessing, analyzing and evaluating crash data, safety countermeasures, transportation infrastructure design, functionality, cost, schedule, and project risk.
• Coordinating with key stakeholders for project design and implementation efforts.
• Managing the procurement, execution and oversight of consultant contracts.
• Facilitating the MAG Transportation Safety Committee and presenting at public meetings.
• Responding to inquiries from internal and external stakeholders on safety initiatives.

The Candidate

The ideal candidate will be proficient in leading planning level analysis, coordinating with internal and external agency partners, and have experience with managing consultants or consultant teams. The candidate should have relevant experience in transportation safety planning, demonstrating a strong level of understanding and competency regarding urban traffic safety; multidisciplinary road safety initiatives; standards and best practices; and safety-related data. The candidate should also have experience presenting complex technical information to a diverse set of stakeholders, including members of the public and policy makers. Experience with human factors, safety education, and strong writing skills is a plus.

Skilled in:

• Excellent communication and writing skills, time management, note taking, and highly organized
• Presenting and conveying technical knowledge to a diverse set of stakeholders, the public and policy makers
• Coordinating with internal and external stakeholders or staff
• Prioritizing workload and responding quickly and accurately
• Anticipating needs and being proactive
• Being self-motivated with a desire to learn and contribute while being detail oriented

Ability to:

• Lead planning level analysis and review engineering and design specific solutions
• Manage consultants or consultant teams of large urban area studies
• Adapt to performing a wide range of duties, frequently shifting tasks of varying nature or complexity
• Work independently
• Analyze and think critically, draw conclusions, and problem solving
• Develop productive relationships and work effectively with a diverse group of stakeholders or staff
• Manage multiple assignments with competing timelines effectively

Technology Skills:

Proficient in Microsoft Windows and Microsoft Office products, including Word, Outlook, PowerPoint, and Excel, Microsoft Teams, Zoom and webinar tools. Familiarity with software tools related to transportation safety and crash data analysis.

Education and Experience

• Bachelor’s degree from an accredited college or university in Engineering or related field
• A master’s degree and/or graduate work in a related field, such as urban planning, and public sector experience are preferable.
• At least three years of related work experience in engineering, urban traffic safety, and/or planning
• Any equivalent combination of training, education, and experience that provides the required skills, knowledge and abilities
• Familiarity with standards, practices, and software tools related to transportation safety, such as: MUTCD, Highway Safety Manual, predictive safety methods, and spatial crash analysis using GIS.

Required Licenses or Certifications

• Professional Engineer (PE) license required

The Maricopa Association of Governments is an Equal Opportunity Employer. During the selection process any applicant requiring accommodation for a disability should advise the Human Resources Division by calling (6

At HelloFresh, we want to change the way people eat forever by offering our customers high-quality food and recipes for different meal occasions. Over the past 10 years, we've seen this mission spread around the world and beyond our wildest dreams. Now, we are a global food solutions group and the world's leading meal kit company, active in 18 countries across 3 continents. So, how did we do it? Our weekly boxes full of exciting recipes and fresh ingredients have blossomed into a community of customers looking for delicious, healthy, and sustainable options. The HelloFresh Group now includes our core brand, HelloFresh, as well as: Green Chef, EveryPlate, Chefs Plate, Factor_, and Youfoodz.

The Environmental Health and Safety team is seeking an experienced Sr. Manager of Safety, you will serve as a site safety manager supporting site leadership. You are responsible for driving safe processes and ensuring compliance to all safety regulations. As well as being responsible for providing safety expertise leveraging lean principles and the hierarchy of controls to ensure the safety of our team members. You will develop and deliver safe processes through engineering and ergonomic solutions in partnership with building and HQ leadership. You will need to coordinate extensively with cross-functional groups such as Operations, HR, Food Safety & Quality, Operational Excellence, and others. You will build and deliver on-time programs that support operational growth where experimentation, imagination, innovation, and results are measured.

A successful Sr. Manager of Safety will have strong leadership skills, be detail-oriented, resilient, a quick decision maker, work with data, and possess a commitment to getting things right. You must be highly determined to drive permanent removal of hazard root causes and strive for the highest quality of service is provided in an efficient, effective, and proactive manner. This role will require granular analysis, tactical execution of Safety functions, site travel, (20%) and project management. This position affords you the opportunity to build cooperative partnerships with numerous business teams within the fulfillment operations.

You will...

• You will identify trends and areas of risk within your building and support operations in corrective measures
• Continuously improve the safety culture through instruction and training of Safety and Operations leaders on safety programs.
• You will assess performance, communicate to all levels of management, and ensure safety is incorporated into supply chain processes and escalate and report critical issues, compliance gaps and emerging risks for the network.
• You will also maintain safety subject matter expertise, credentials and engage industry resources as appropriate.
• Create weekly business reviews of projects, incidents, trend analysis (if any) and project statuses
• Work independently with limited direction and communicate effectively with team members

Safety Processes:

• Review metrics and incident details weekly, and support operations in determining root cause and corrective measures.
• Ensure safety programs and rollouts are implemented. Monitor for execution.
• Utilizes 6SIGMA and/or other analysis tools as appropriate to identify safety solutions for unique processes.
• Perform floor walks to interact with the team, audit for compliance and execution of safety programs.
• Assists with specialized safety program development and implementation.
• Solicits feedback and identifies benchmarking opportunities within the industry to identify tools, processes, systems and equipment to reduce the risk of injury.
• The ability to lead a team of Safety managers both with direct and indirect oversight.

Compliance and regulatory matters

• Responsible for having a thorough working knowledge of Federal and State OSHA regulations.
• Ensures safety processes are followed to maintain compliance with regulations.
• Supports the development and follow up of any remediation plans due to safety related citations
• Acts as a subject matter expert resource to field teams on safety related regulatory compliance issues.

• Works closely with other Compliance partners, including Industrial Hygiene, Environmental, and Field Compliance Team to address team member health exposure issues that are related to safety enforcement activities.

Incident Response

• Deploy to other locations in the event support is needed or to perform cross building audit activities
• Serve as on-site incident leader in the event of a severe injury

You are...

• Partner: you effectively listen, build rapport and communicate at all levels; you're confident sharing ideas and are a trusted advisor for workplace safety
• Results-driven: you recognize and resolve situations that are ambiguous or challenging, focus effort on meeting or exceeding goals, and pave the way for efficiency.
• Programmatic: able to identify the system component that is causing the error, as well as the options available for resolving it and completing the task.
• Inspirational: you know how to make an impact and deliver presentations that inspire and influence change
• Strategic: you understand you can't take a one-size-fits-all approach when problem-solving; seeing the bigger picture and each moving part helps you identify underlying causes, alternatives or long-term solutions

You have...

• Possess a bachelor's degree in occupational safety and health or a related field
• Certified Safety Professional or other Safety Certification
• Have 8+ years' management experience in occupational safety and health, NFPA, etc.
• Experience with OSHA VPP or implementing ISO45001, preferred
• Experience in a Manufacturing, Fulfillment or Distribution Environment

You'll get...

• Competitive hourly rate, 401K company match that vests immediately upon participation, & team bonus opportunities
• Generous PTO and flexible attendance policy
• Comprehensive health and wellness benefits with options at $0 monthly, effective first day of employment
• Up to 85% discount on subscriptions to HelloFresh meal plans (HelloFresh, Green Chef, Everyplate, and Factor_)
• Access to Employee Resource Groups that are open to all employees, including those pertaining to BIPOC, women, veterans, parents, and LGBTQ+
• Inclusive, collaborative, and dynamic work environment within a fast-paced, mission-driven company that is disrupting the traditional food supply chain

This job description is intended to provide a general overview of the responsibilities. However, the Company reserves the right to adjust, modify, or reassign work tasks and responsibilities as needed to meet changing business needs, operational requirements, or other factors.

Arizona Pay Range

$115,500—$134,750 USD

This position is also eligible for the HelloFresh equity plan.

About HelloFresh

We believe that sharing a meal brings people of all identities, backgrounds, and cultures together. We are committed to celebrating all dimensions of diversity in the workplace equally and ensuring that everyone feels a sense of inclusion and belonging. We also aim to extend this commitment to the partners we work with and the communities we serve. We are constantly listening, learning, and evolving to deliver on these principles. We are proud of our collaborative culture. Our diverse employee population enables us to connect with our customers and turn their feedback into meaningful action - from developing new recipes to constantly improving our process of getting dinner to our customers' homes. Our culture attracts top talent with shared values and forms the foundation for a great place to work!

At HelloFresh, we embrace diversity and inclusion. We are an equal-opportunity employer and do not discriminate on the basis of an individual's race, national origin, color, gender, gender identity, gender expression, sexual orientation, religion, age, disability, marital status, or any other protected characteristic under applicable law, whether actual or perceived. As part of the Company's commitment to equal employment opportunity, we provide reasonable accommodations, up to the point of undue hardship, to candidates at any stage, including to individuals with disabilities.

We want to adapt our processes and create a safe space that welcomes everyone so please let us know how we can accommodate our process. In case you have any accessibility requirements you can share that with us in the application form.

To learn more about what it's like working inside HelloFresh, follow us on Instagram and LinkedIn.

HelloFresh is committed to the principles of equal employment opportunity and providing reasonable accommodations to candidates with disabilities. If you need an accommodation during the application process, please reach out to us at:

• Europe:
• APAC:
• United States:
• Canada:

Airswift is working in partnership with a rapidly growing advanced‐materials company seeking a Lab Manager for a permanent, onsite role based in Mesa, Arizona.

This position will report directly to the COO and will play a key role as the organization transitions from pilot‐scale operations to its first commercial manufacturing facility over the next 1.5–2 years. The new Lab Manager will be central to building the quality, testing, and analytical foundation that supports this scale‐up.

Qualifications:

• 10+ years of laboratory experience within materials, minerals, chemicals, petrochemical, industrial processing or advanced‐materials environments.
• Experience overseeing or working with materials characterization techniques like ICP, XRD, XRF, PSD, BET, SEM/EDS, Raman, tap density, LECO, and wet chemistry
• Demonstrated ability to develop and formalize quality procedures, implement SOPs, establish testing methods and build scalable quality systems.
• Strong leadership background with experience managing lab teams, hiring, training, and building operational culture.
• Experience operating in production‐driven settings where QC directly supports product release and customer requirements.
• Working knowledge of HSEQ practices, risk management, and laboratory safety standards.
• Bachelor's degree in Chemistry, Materials Science, Engineering, or a related field; Master's degree is a plus.
• Must be willing to work onsite in Mesa and relocate within 1.5–2 years to a new U.S. facility.

Why This Opportunity Is Unique:

• This is a high‐visibility, high‐impact role with direct access to senior leadership.
• The chance to build and shape the lab function during a major scale‐up phase.
• Work in the advanced‐materials space supporting a critical U.S. energy‐supply‐chain initiative.
• Clear career path with potential for promotion into a Director‐level position as operations expand.

If you believe this is an opportunity that fits you, apply to this post and I will be glad to present you with more details on this role!

We have openings for CONSTRUCTION MECHANICAL Project Managers, SR PM's, and Project Executives

MUST HAVE CONSTRUCTION MECHANICAL BACKGROUND TO BE CONSIDERED!!

Responsibilities:

• Drive the successful completion of high-quality projects within specified timelines and budgets. Proactively manage scope changes, conduct thorough material assessments, and negotiate contracts to ensure project success.
• Reviews various reports to determine project status and determine actions required. Provides periodic status and end of contract cost and budget analysis.
• Facilitate and participate in project meetings to align with customer expectations and company standards. Lead pre-job planning sessions to ensure clear understanding of project requirements among team members.
• Assembles an estimates projects. Reviews the final estimate and ensures the proper loading of those numbers into the project cost system.
• Communicates all project issues to the appropriate level of management in a timely manner.
• Documents planning meeting results and ensures all action items are completed. Develops and keeps current all project schedules. Ensures all schedules mesh with the master project schedule and resolves conflicts when they occur.
• Prepares and submits monthly contract billings to ensure proper cash flow during contract performance. Protects the company’s interest by managing all financial aspects of the contract. Completes project closeout/inactivation within prescribed period including the final project billing to obtain full funding.
• Manages conflict resolution with customers, vendors, trades or Partners. Leads and manages other project managers. Provides leadership, shares technical expertise and experience to other Partners.
• Identifies and develops policies and procedures for continuous aggressive improvement.
• Assembles estimates for projects. Visits job sites or onsite offices, performs work inspections, checks job progress, and resolves project and contract issues.

Qualifications:

• A Bachelor’s degree in Construction Sciences, Mechanical Engineering, or a related engineering field is preferred.
• Minimum of 7 years of proven experience in successfully leading projects and programs within the construction or engineering industry.
• Experience in successfully leading projects and programs, on-schedule and within budget.
• Interpersonal skills to influence and spur change, facilitate and enhance performance within a cross functional environment.
• Proven ability to demonstrate a drive for results and accountability of business needs.
• Demonstrate decisiveness in resolving business problems, making decisions and identifying priorities.

About Us

Clayco is a full-service, turnkey real estate development, master planning, architecture, engineering, and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $7.6 billion in revenue for 2024, Clayco specializes in the "art and science of building," providing fast track, efficient solutions for industrial, commercial, institutional, and residential related building projects.

The Role We Want You For

As a Project Cost Engineer, you will assist in the development and management of the project financial strategy. You will be working directly with the project management team to manage the project budget, costs, change orders, pricing requests, billings, and forecasts. You will be responsible for generating and maintaining reports that provide information to different groups, work with the management team to identify variances, risks and maintain quality control processes to improve project cost procedures and ensuring conformity with management's strategy.

The Specifics of the Role

• Works with all project disciplines to ensure understanding of total project cost budget allowances and targets.
• Review project documents and specifications to accurately identify, develop and track request of change orders (owner and subcontractor related), baseline estimates, potential risk exposures while communicating potential impacts to the financial targets, schedule, and overall project management process.
• Works closely with the accounting department to ensure the correct integration of all information needed to ensure accuracy in billings, payment applications, change orders, direct cost, labor cost, etc.
• Works closely with the project management team, executive management personnel, subcontractors, as well as occasional contact with clients.
• Responsible for cost engineering, cost estimation, cost analysis, and control activities for projects with significant non-routine requirements or for proposal estimating activities which require a moderate degree of technical skill and experience.
• Ensuring quality, accuracy, consistency, spend profile, performing change management, and transparency in all cost management deliverables.
• Take ownership of the cost control function and ensure integrity of the cost and forecast reporting.

Requirements

• Bachelor Degree in Business Administration, Engineering, or Construction Management, or related degree.
• 0-3 years of Project Cost experience.
• Preferred 1 year of experience in the construction industry.
• Knowledge of project development stages, procurement, project controls, and construction execution practices is required.
• Working knowledge of applicable computer software such as PMWeb or similar project portfolio management software, DataServ, Excel, JD Edwards, or related software programs.
• Effective problem-solving skills.
• Results oriented and deliver on customer commitments.

Some Things You Should Know

• Our clients and projects are nationwide – Travel will be required.
• No other builder can offer the collaborative design-build approach that Clayco does.
• We work on creative, complex, award-winning, high-profile jobs.
• The pace is fast!
• This position is classified as a safety-sensitive role in accordance with applicable state and federal laws. Candidates selected for this position will be subject to a comprehensive background check, which includes mandatory drug testing.

Why Clayco?

• 2025 Best Places to Work – St. Louis Business Journal, Los Angeles Business Journal, and Phoenix Business Journal.
• 2025 ENR Midwest – Midwest Contractor (#1).
• 2025 ENR Top 100 Design-Build Firms – Design-Build Contractor (Top 5).
• 2025 ENR Top 100 Green Contractors – Green Contractor (Top 3).
• 2025 ENR Top 25 Data Center Builders – Data Center Contractor (Top 3).

Benefits

• Discretionary Annual Bonus: Subject to company and individual performance.
• Comprehensive Benefits Package Including: Medical, dental and vision plans, 401k, generous PTO and paid company holidays, employee assistance program, flexible spending accounts, life insurance, disability coverage, learning & development programs and more!

Compensation

• The salary range for this position considers a wide range of factors in making compensation decisions including but not limited to: Education, qualifications, skills, training, experience, certifications, internal equity, and location. Compensation decisions are dependent on the facts and circumstances of each case.

Job Title: Mechanical Project Manager

Location: Phoenix, Arizona, United States (On-site)

Employment Type: Full-Time

Salary Range: $90,000 – $130,000 per year

About the Role

We are seeking an experienced Mechanical Project Manager to join our growing team in Phoenix, Arizona. This role is responsible for leading mechanical construction and engineering projects from preconstruction through completion. The ideal candidate will have strong leadership, scheduling, and budgeting skills, along with experience coordinating with field teams, engineers, subcontractors, and clients.

Key Responsibilities

• Manage mechanical construction projects from planning through closeout.
• Develop and maintain project schedules, budgets, and forecasts.
• Coordinate with engineering teams, field supervisors, subcontractors, and vendors.
• Review project drawings, specifications, and submittals.
• Monitor project progress and ensure milestones are met.
• Identify and resolve project risks, delays, and scope changes.
• Conduct project meetings with internal teams and clients.
• Ensure compliance with safety regulations, company standards, and local codes.
• Track project costs, approve invoices, and manage change orders.
• Provide regular project updates and reports to leadership.

Qualifications

• Bachelor’s degree in Mechanical Engineering, Construction Management, or related field, or equivalent experience.
• 5+ years of experience managing mechanical or MEP construction projects.
• Strong knowledge of HVAC, piping, and mechanical systems.
• Experience with construction scheduling software and project management tools.
• Ability to read and interpret mechanical drawings and specifications.
• Strong leadership, communication, and organizational skills.
• Experience managing budgets, contracts, and subcontractors.
• PMP certification is a plus but not required.

Preferred Experience

• Experience with commercial, industrial, or mission-critical projects.
• Familiarity with local building codes and permitting processes.
• Experience working with general contractors and design teams.

Benefits

• Competitive salary ($90,000 – $130,000 depending on experience)
• Health, dental, and vision insurance
• 401(k) with company match
• Paid time off and company holidays
• Opportunities for career growth and advancement