Engineering Structures Impact Factor Jobs in Northampton Massachusetts

Border Patrol Agent (BPA) Entry Level A MISSION WORTHY OF A CAREER! If you're looking for "just a job," then stop reading right now.

But, if you're looking for a long-term federal law enforcement career, one that makes a difference every day to our country and its citizens, then the U.S.

Border Patrol (USBP) would like you to take the first step to becoming an entry level Border Patrol Agent.

USBP is hiring immediately to fill full-time, entry-level, career positions in federal law enforcement.

Train and work with an elite team of professionals whose camaraderie, pride, and sense of purpose are hallmarks of their daily mission of protecting America.

Now is the time to make your move because, along with excellent base pay, exceptional benefits, and job stability, USBP is offering up to $60,000 in additional incentives (see details below) .

Salary and Benefits Annual base salary for newly appointed BPAs varies per grade, as follows: GL-5/GL-7 $49,739
- $89,518 per year.

Border Patrol Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional ROTH 401(k) offering.
*Recruitment Incentive
* Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102 ) will be eligible for up to $20,000 in incentives.

The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location such as Sierra Blanca, Presidio, Sanderson, Comstock, Freer or Hebbronville, TX; Lordsburg, NM; or Ajo, AZ.
*Retention Incentive
* Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.

Duty Locations IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations.

U.S.

Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates' first-choice preferences.

Relocation may be required.

Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others.

A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014.

This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12.

You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level.

Duty Locations: You will be asked to select your preferred location for one of the following mission critical locations: Big Bend Sector Stations
-
*Presidio, Van Horn,
*Sanderson, Alpine,
*Sierra Blanca, Marfa Buffalo Sector Stations
- Wellesley Island Del Rio Sector Stations
- Del Rio, Brackettville,
*Comstock, Eagle Pass North, Eagle Pass South, Carrizo Springs, Uvalde El Paso Sector Stations
- Alamogordo, Clint, Deming, El Paso, Fort Hancock, Las Cruces,
*Lordsburg, Santa Teresa, Ysleta El Centro Sector Stations
- El Centro, Indio, Calexico Grand Forks Sector Stations
- Pembina Havre Sector Stations
- Havre, Malta, Plentywood, Scobey, Sweetgrass Houlton Sector Stations
- Calais, Fort Fairfield, Jackman, Rangeley, Van Buren Laredo Sector Stations
- Laredo South, Cotulla,
*Hebbronville, Laredo West,
*Freer, Laredo North, Zapata Rio Grande Valley Sector Stations
- Rio Grande City, Fort Brown, McAllen, Brownsville, Falfurrias, Weslaco, Kingsville, Harlingen San Diego Sector Stations
- Boulevard, Brownfield, Campo, Chula Vista, Imperial Beach, Murrieta, San Clemente Spokane Sector Stations
- Colville, Curlew, Metaline Falls, Oroville Swanton Sector Stations
- Beecher Falls, Burke, Champlain, Newport, Richford Tucson Sector Stations
-
*Ajo, Tucson, Nogales, Douglas, Brian A Terry, Sonoita, Casa Grande, Three Points Substation, Willcox Yuma Sector Stations
- Blythe, Yuma, Wellton Duties and Responsibilities As a BPA, you will be part of our 60,000 workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity.

Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.

Typical assignments include: Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband Performing farm checks, building checks, traffic checks, city patrols, and transportation checks Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.

Qualifications You qualify for the GL-5 grade level if you possess one of the following: Experience: One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records; OR Education Substitution: A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR Combination of Experience and Education: A combination of general work experience AND successfully completed college education.

This will be calculated using your resume and official or unofficial transcripts submitted with your application.

You qualify for the GL-7 grade level if you possess one of the following: Experience: One year of specialized work experience that shows you have the skills necessary to: Make sound judgments and decisions in the use of firearms.

Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters.

Analyze information rapidly and make prompt decisions where you will be expected to make arrests after the completion of required training and apply these skills in a law enforcement capacity such as criminal code enforcement, determining violations of laws, correctional or rehabilitation work involving criminal offenders, security, military, etc.

The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants.

Education Substitution for the GL-7 grade level: A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership.

Or will receive a bachelor's degree with Superior Academic Achievement.

Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR A Combination of Experience and Education: This will be calculated using your resume and official or unofficial transcripts submitted with your application.

Note: If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level.

Please refer to the BPA GL-9
- 11 announcement.

Other Requirements Citizenship : You must be a U.S.

Citizen to apply for this position.

Residency : You must have had primary U.S.

residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Restriction : In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions.

Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03.

The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C.

8336(c) or Title 5 U.S.C.

8412(d).

Veterans' Preference : You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA).

The age restriction does not apply if you are Veterans' Preference eligible.

Formal Training : After you are hired, you will be detailed to the U.S.

Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement and USBP-specific operations, driver training, physical techniques, firearms, and other courses.

Border Patrol work requires the ability to speak and read Spanish, as well as English.

Border Patrol Agents will be provided training to become proficient with the Spanish language at the Academy.

How to Apply: Click the Apply button on this site.

You will be linked to the CBP Talent Network registration page.

For Position of Interest, select Border Patrol Agent, then complete the pre-screening questions.

You'll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application.

Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit.

You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam .

If you have questions about the application process, contact a recruiter through the U.S.

Border Patrol page: /s/usbp .

As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.

A MISSION WORTHY OF A CAREER! If you're looking for "just a job," then stop reading right now.

But, if you're looking for a long-term federal law enforcement career, one that makes a difference every day to our country and its citizens, then the U.S.

Border Patrol (USBP) would like you to take the first step to becoming an entry level Border Patrol Agent.

USBP is hiring immediately to fill full-time, entry-level, career positions in federal law enforcement where your prior experience in public safety, security, military police or law enforcement may qualify.

Train and work with an elite team of professionals whose camaraderie, pride, and sense of purpose are hallmarks of their daily mission of protecting America.

Now is the time to make your move because, along with excellent base pay, exceptional benefits, and job stability, USBP is offering up to $60,000 in additional incentives (see details below) .

Salary and Benefits Annual base salary for newly appointed BPAs varies per grade, as follows: GL-5/GL-7 $51,632
- $92,219 per year.

Border Patrol Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional ROTH 401(k) offering.
*Recruitment Incentive
* Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102 ) will be eligible for up to $20,000 in incentives.

The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location such as Sierra Blanca, Presidio, Sanderson, Comstock, Freer or Hebbronville, TX; Lordsburg, NM; or Ajo, AZ.
*Retention Incentive
* Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.

Duty Locations IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations.

U.S.

Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates' first-choice preferences.

Relocation may be required.

Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others.

A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014.

This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12.

You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level.

Duty Locations: You will be asked to select your preferred location for one of the following mission critical locations: Big Bend Sector Stations
-
*Presidio, Van Horn,
*Sanderson, Alpine,
*Sierra Blanca, Marfa Buffalo Sector Stations
- Wellesley Island Del Rio Sector Stations
- Del Rio, Brackettville,
*Comstock, Eagle Pass North, Eagle Pass South, Carrizo Springs, Uvalde El Paso Sector Stations
- Alamogordo, Clint, Deming, El Paso, Fort Hancock, Las Cruces,
*Lordsburg, Santa Teresa, Ysleta El Centro Sector Stations
- El Centro, Indio, Calexico Grand Forks Sector Stations
- Pembina Havre Sector Stations
- Havre, Malta, Plentywood, Scobey, Sweetgrass Houlton Sector Stations
- Calais, Fort Fairfield, Jackman, Rangeley, Van Buren Laredo Sector Stations
- Laredo South, Cotulla,
*Hebbronville, Laredo West,
*Freer, Laredo North, Zapata Rio Grande Valley Sector Stations
- Rio Grande City, Fort Brown, McAllen, Brownsville, Falfurrias, Weslaco, Kingsville, Harlingen San Diego Sector Stations
- Boulevard, Brownfield, Campo, Chula Vista, Imperial Beach, Murrieta, San Clemente Spokane Sector Stations
- Colville, Curlew, Metaline Falls, Oroville Swanton Sector Stations
- Beecher Falls, Burke, Champlain, Newport, Richford Tucson Sector Stations
-
*Ajo, Tucson, Nogales, Douglas, Brian A Terry, Sonoita, Casa Grande, Three Points Substation, Willcox Yuma Sector Stations
- Blythe, Yuma, Wellton Duties and Responsibilities As a BPA, you will be part of our 60,000 workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity.

Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.

Typical assignments include: Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband Performing farm checks, building checks, traffic checks, city patrols, and transportation checks Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.

Qualifications You qualify for the GL-5 grade level if you possess one of the following: Experience: One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records; OR Education Substitution: A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR Combination of Experience and Education: A combination of general work experience AND successfully completed college education.

This will be calculated using your resume and official or unofficial transcripts submitted with your application.

You qualify for the GL-7 grade level if you possess one of the following: Experience: One year of specialized work experience that shows you have the skills necessary to: Make sound judgments and decisions in the use of firearms.

Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters.

Analyze information rapidly and make prompt decisions where you will be expected to make arrests after the completion of required training and apply these skills in a law enforcement capacity such as criminal code enforcement, determining violations of laws, correctional or rehabilitation work involving criminal offenders, security, military, etc.

The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants.

Education Substitution for the GL-7 grade level: A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership.

Or will receive a bachelor's degree with Superior Academic Achievement.

Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR A Combination of Experience and Education: This will be calculated using your resume and official or unofficial transcripts submitted with your application.

Note: If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level.

Please refer to the BPA GL-9
- 11 announcement.

Other Requirements Citizenship : You must be a U.S.

Citizen to apply for this position.

Residency : You must have had primary U.S.

residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Restriction : In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions.

Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03.

The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C.

8336(c) or Title 5 U.S.C.

8412(d).

Veterans' Preference : You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA).

The age restriction does not apply if you are Veterans' Preference eligible.

Formal Training : After you are hired, you will be detailed to the U.S.

Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement and USBP-specific operations, driver training, physical techniques, firearms, and other courses.

Border Patrol work requires the ability to speak and read Spanish, as well as English.

Border Patrol Agents will be provided training to become proficient with the Spanish language at the Academy.

How to Apply: Click the Apply button on this site.

You will be linked to the CBP Talent Network registration page.

For Position of Interest, select Border Patrol Agent, then complete the pre-screening questions.

You'll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application.

Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit.

You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam .

If you have questions about the application process, contact a recruiter through the U.S.

Border Patrol page: /s/usbp .

As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.

Explore an Exceptional Locum Tenens Opportunity in Beautiful Massachusetts
- Obstetrics and Gynecology Physician Needed! Are you a skilled Obstetrics and Gynecology Physician looking for a fulfilling locum tenens assignment? We have a fantastic opportunity in the picturesque state of Massachusetts, near Hatfield.

Join a dynamic team and make a meaningful impact on women's health from January 1, 2024, onward.

Position Highlights: Schedule: Enjoy a flexible schedule with scheduled clinical hours plus call, providing you with a diverse and engaging work experience.

This is an ongoing opportunity, ensuring stability and continuity in patient care.

Patient Load: The average number of deliveries per year is substantial, with a focus on low and high-risk pregnancies.

This position offers exposure to a wide range of obstetric and gynecologic procedures, making it an excellent opportunity for professional growth.

Setting: Work in a supportive environment that accepts multiple providers and values the contributions of locum tenens physicians.

This facility is equipped with Cerner EMR and is committed to delivering high-quality care.

Credentialing and Support: Candidates for this position must be board-certified in Obstetrics and Gynecology, with a preference for fellowship-trained physicians.

Active licensure in Massachusetts is essential, and the facility will not accept bids from providers without an active MA license.

The credentialing timeframe is estimated to be 30-60 days.

Travel and Location: The facility is conveniently located near Hatfield, Massachusetts, with easy access to the nearest airport.

Lodging recommendations will be provided upon inquiry.

Specialty Skills and Details: Providers will have the support of dedicated support staff, including RNs and MAs, with details to be determined.

The facility has a well-established team of 3 MDs and 1 FNP-C, ensuring a collaborative and collegial work environment.

How to Apply: If you are interested in this exciting Obstetrics and Gynecology locum tenens opportunity, please contact MD Staff at or via email at .

Reference Job ID for prompt assistance and to learn more about this rewarding position in Massachusetts.

Join Our Team: Embark on a rewarding journey with this exceptional locum tenens opportunity.

Contribute to the healthcare needs of the community while enjoying the scenic beauty and cultural richness of Massachusetts.

We look forward to welcoming talented physicians to our team! HDAJOBS MDSTAFF

As a Director of Social Work you’ll bring your experience and knowledge where your voice matters. The Director of Social Work is an integral part of our multidisciplinary treatment team. You will provide direct care and support not only to our patients but also their families and make decisions that impact the lives of your peers, your patients, and your community. In exchange, we will care for you, as much as you care for our patients.

As the Director of Social Work:

• You are responsible for management of the Social Work and Group Therapy Departments.
• You will advocate for the interests and safety of the patients and department members while acting in accordance with compliance regulations.
• You are required to provide supervision, as needed and appropriate, to any department member requiring guidance, as well as any department member eligible for licensure, as required by that specific licensure board.
• You will conduct monthly group supervision of each department, regardless of member licensure status.
• You will attend any internal or external meetings as required by the senior leadership team or department members requiring additional support.

The Director of Social Work will have the following:

• LICSW required.
• Minimal 2 years of experience in an inpatient setting.
• Minimal 2 years of experience in a management role.
• Valid CPR certification preferred.
• Sufficient typing and computer skills to facilitate use of Electronic Health Record preferred.
• Experience with Electronic Health Record, including Medsphere/Vista

When you join the growing team as a Director of Social Work, you’ll receive:

• Medical, Dental, and Vision
• 401(k) match
• Employer paid long term disability (LTD)
• Short term disability (STD)
• Employer paid life and AD&D Insurance
• Generous Paid Time Off
• Flexible Spending Account
• Tuition Reimbursement

Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.

Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.

What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.

Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.

Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.

Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Company

Myrias Optics, Inc. is a fast-growing startup using proprietary nanoimprint technology to revolutionize the way optical components and systems are conceptualized, designed, and manufactured. The company is positioned to disrupt markets across a wide range of applications including consumer electronics, AR/VR, 3D scanners and LiDAR, imaging systems, optical communications, medical equipment, optical computing and more. Our unique all-inorganic imprinted optics enable metalenses, diffractive optics, waveguides all manufactured using wafer level process. By removing any organic material, we not only eliminate environmental and reliability issues but at the same time enable more complex designs with unmatched optical performance and highly cost-effective manufacturing.

Website: – Lead Optical Characterization Engineer

Reporting to the CTO, the Lead Optical Characterization Engineer will collaborate with a talented team of engineers and scientists to test and evaluate cutting-edge Myrias Optics components and systems. Specifically, this position will lead experimental characterization of optical components, define and set up optical characterization systems, establish test and characterization procedures, develop efficient data acquisition and analysis methodologies, and grow and manage the optical characterization team. This role is ideal for someone with strong system-level thinking and hands-on optical experience, who is eager to lead complex interdisciplinary projects and mentor junior staff. You will serve as a bridge between software, hardware, and optical domains, ensuring our systems meet stringent performance and quality benchmarks. This is an exciting opportunity for a highly motivated and capable engineer to gain expertise in the growing fields of meta-optics, waveguides, and diffractive optics. Together, we can shape next-generation optical systems for consumer devices, AR/VR, medical instrumentation, automobiles, robotics, and more.

POSITION TYPE: Full time, on-site

SALARY RANGE: $125,000 - $145,000

LOCATION: Amherst, MA

EXPERIENCE LEVEL: Senior (5+ years)

Key Responsibilities

Technical Leadership & Systems Engineering

• Lead cross-functional efforts in the development and integration of optical test systems.
• Define and enforce system-level requirements, test procedures, and verification protocols.
• Coordinate resources and timelines for optical characterization projects from concept to execution.
• Provide technical mentorship and guidance to a growing team of engineers and technicians.

Optical Characterization and Metrology

• Design optical systems for high volume screening and characterization of wafer level optics operating in mass production environments.
• Execute precise optical measurements and characterization utilizing systems involving lasers, fiber optics, cameras, and power meters.
• Establish designs and processes for alignment and integration of optical components into custom assemblies.
• Develop calibration and validation methods to ensure high measurement fidelity and reproducibility.

Software and Automation Integration

• Oversee or contribute to development of software tools for machine control, data acquisition, and image processing.
• Drive system automation strategies for scalable and repeatable test and metrology setups.

Quality Control and Troubleshooting

• Establish quality assurance workflows, analyze measurement data, and resolve systemic performance issues.
• Manage root cause analysis and continuous improvement for metrology tools and setups.

Cross-Functional Collaboration

• Work closely with design and fabrication teams to influence product and measurement fixture development for testability.
• Maintain detailed technical documentation, review reports, and communicate project updates across teams.

Qualifications and Requirements

Experience

• Minimum 5 years in optical engineering, systems engineering, or optical characterization roles.
• Demonstrated leadership or mentorship experience in a technical setting.

Technical Expertise

• Strong proficiency with optical instruments such as cameras, lasers, power meters, and fiber optics.
• Familiarity with machine control programming in Python, LabVIEW, MATLAB, or similar.
• Experience integrating hardware/software in optical test setups.

Education

• Bachelor's degree in Optical Engineering, Physics, Electrical Engineering, Mechanical Engineering or a related field.
• Master's or Ph.D. preferred.

Skills

• Deep understanding of optical principles (reflection, refraction, alignment, metrology).
• Strong systems thinking and analytical skills for debugging and optimization.
• Excellent communication skills for technical collaboration and leadership.

Preferred Qualifications

• Experience with real-time control systems and/or machine vision.
• Familiarity with optical design tools (e.g., Zemax) and mechanical design tools (e.g., SolidWorks).
• Background in fast-paced R&D, manufacturing, or laboratory environments.

WHAT WE OFFER

• Competitive Compensation Package, including equity
• Full Medical, Vision and Dental plans
• Insurance: Company paid disability insurance
• Paid time off: Vacation and sick time

EEO Statement

Myrias Optics is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics.

APPLY

If you are interested in the role, please submit your resume in .pdf format with a title of "[First name] [last name] Resume" to .

Company

Myrias Optics, Inc. is a fast-growing startup using proprietary nanoimprint technology to revolutionize the way optical components and systems are conceptualized, designed, and manufactured. The company is positioned to disrupt markets across a wide range of applications including consumer electronics, AR, 3D scanners and LiDAR, imaging systems, optical communications, medical equipment, optical computing and more. Our unique all-inorganic imprinted optics enable metalenses, diffractive optics, waveguides all manufactured using wafer level process. By removing any organic material, we not only eliminate environmental and reliability issues but at the same time enable more complex designs with unmatched optical performance and highly cost-effective manufacturing.

Website: – Process Engineer

Reporting to the Technical Director, the Process Engineer will collaborate with a talented team of engineers and scientists to help develop and manufacture cutting-edge Myrias Optics components and systems. Specifically, this position will support Myrias' nanoimprint ink development efforts, working with our process and characterization teams to optimize the formulations and process conditions to enable imprinted optical devices with high performance, high yield and new functionality. This position will also be responsible for transitioning the technology to our manufacturing team whose goal will be to bring a high volume, high yield nanoimprint process to market for our optical components and subsystems. This is an exciting opportunity for a highly motivated and capable engineer to gain expertise in the growing fields of meta-optics, waveguides, and diffractive optics. Together, we can shape next-generation optical systems for consumer devices, AR, medical instrumentation, automobiles, robotics, and more.

POSITION TYPE: Full time, on-site

SALARY RANGE: $70,000 - $90,000

LOCATION: Amherst, MA

RESPONSIBILITIES

Process and formulation development:

• Work closely with the Myrias process, characterization and manufacturing teams to develop and optimize ink formulations meeting product requirements and production standards
• Work with our manufacturing team to transitioning fabrication knowledge and processing techniques for all-inorganic nanoimprinting to high volume production, including formulations, stamp making and imprint processes
• Assist with fabrication of components and systems based on Myrias' proprietary materials and processes meeting quality and optical performance specifications
• Conduct comprehensive nanoimprint ink tests and optimization, including formulation, imprinting, and post processing (calcination, ashing, etching, atomic layer deposition and/or overcoating)
• Performing metrology for fabricated components by top-down and cross-sectional scanning electron microscopy, variable angle spectroscopic ellipsometry, UV-Vis-NIR spectrometry and contact angle measurements
• Work with Myrias optical characterization team to feedback optical test results into process optimization efforts to enabling a closed loop process
• Familiarity with characterization and testing of optical devices, including the use of lenses, mirrors, light sources, fiber optics, cameras, lasers, and other optical devices is a strong plus
• Establish detailed and thorough documentation for all operating procedures and production processes
• Assist in expand Myrias' fabrication capabilities by identifying and implementing new process improvements
• Development and maintain comprehensive database of research data, sample/product travelers, characterization and yield data, and sample histories
• Provide technical guidance and feedback to management for more efficient workflow
• Create detailed internal reviews and customer product reports
• Assist in providing customer support for new designs and products
• Monitor and participate in safe clean room practices

QUALIFICATIONS

• Bachelor's degree in chemical engineering, material science, electrical engineering or equivalent technical discipline. A Master's degree is a plus, Ph.D. Preferred
• 5+ years of industrial experience working with optical materials
• Strong understanding of chemical engineering, processing and optical testing and metrology
• Expertise in imprint or nanofabrication processes
• Experience with atomic layer deposition systems, high temperature oven, etching tools, ashers and evaporation tools
• Expertise with standard characterization tools like scanning electron microscopy, variable angle spectroscopic ellipsometry, UV/Vis/NIR spectroscopy and laser table characterization
• Ability to analyze and interpret complex datasets and validate system performance
• Experience with document control best practices
• Strong interpersonal and technical communication skills
• Experience with polymers, inorganic materials and chemicals with strong understanding of nanoparticle composites and binding chemistry
• The ability to problem-solve and trouble shoot complications safely
• Experience collaborating within and between personnel with multi-disciplinary backgrounds
• Familiar with the startup or early-stage business environment
• Entrepreneurial spirit, with a hands-on, roll-up-the-sleeves mentality

WHAT WE OFFER

• Competitive Compensation Package, including equity
• Full Medical, Vision and Dental plans
• Insurance: Company paid disability insurance
• Paid time off: Vacation and sick time

EEO Statement

Myrias Optics is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics.

If you are interested in the role, please submit your resume in .pdf format with a title of "[First name] [last name] Resume" to .

The TSUBAKI name is synonymous with excellence in quality, dependability and customer service. U.S. Tsubaki Automotive, LLC is an international tier-one supplier of high-speed chain drive systems to the automotive industry.  

The Quality Manager is responsible for managing and directing production quality. The Quality Manager is responsible for planning goals, strategies, and resources to meet company objectives. Must be knowledgeable of Automotive Quality Requirements, including the IATF Quality Standard, Customer New Product Development procedures, Laboratory requirements, and Manufacturing techniques. Must possess Leadership qualities required to lead Continuous Improvement teams and gain the confidence of Production areas.

Essential Duties and Responsibilities: The essential duties and responsibilities of this job are included but not limited to this job description – other tasks may be assigned and expected to be performed.

• Ability to Problem Solve and provide Decision Making methods to tackle complex Product and Process Quality issues.
• Strong Manufacturing background in a high-volume, automated machining and assembly operation.  
• Provides Leadership role in CI process to improve quality and efficiency and reduce costs.
• Key member of Management Team responsible for accomplishing business goals and objectives.
• Manages the accuracy and schedules related to QA support functions, including Calibration of Gages and Equipment, including Test machinery.  
• Leads team to reduce non-conformances and eliminate sorting/rework. Coordinates resources required to address quality concerns.
• Develops plans to improve quality and efficiency, while reducing costs.
• Create and monitor daily efficient flow of material through the department by utilization of manpower and equipment in the department.
• Determine and implement continuous improvement plans for the equipment, and overall department.
• Manage yearly budget for the department ensure goals are met by reducing cost related to production and MRO supplies.
• Establish working relationships with associated departments i.e. Planning, Engineering and Production.
• Establish and maintain effective communication vehicles such as toolbox meetings and employee meetings.
• Understands, communicates and follows all company policies, work rules, and Union Contract. Effectively utilizes this knowledge to analyze and resolve work problems, assist workers in solving work problems, and make daily decisions on production schedules and personnel-related matters that affect the delivery and quality.

It is the expectation of the company that Managers/Supervisors will accomplish these goals by working to a high ethical standard and consistently complies with all company policies, work rules, Union Contractual agreements, and applicable laws with little to no direct supervision.

• BSME Degree required, an advanced engineering degree is preferred. 
• ASQ CMQ/QE or equivalent preferred.
• 5+ Years of Manufacturing within the Automotive Industry is highly desired. ; Eight (8) to ten (10) years of Quality Management experience in a manufacturing environment. 
• Demonstrable knowledge and experience in Lean Manufacturing, Project Management, ISO and TS16949 procedures experience is desired.
• Ability to multi-task and prioritize work required. Excellent time management skills required.
• Excellent interpersonal skills required. Ability to effectively communicate verbally and in writing required.
• Ability to think critically and creatively in high stress situations.
• Willingness & ability to travel as necessary.

Learn more about U.S. Tsubaki at: Tsubaki offers a competitive compensation and benefits package, including health benefits effective on date of hire, dental and vision benefits effective on the first of the month following date of hire, Paid Time Off ("PTO"), 10 paid holidays, generous 401(k) match and profit sharing, annual bonus potential, life insurance, short and long-term disability, flexible spending accounts, commuter benefits, education reimbursement, home and auto insurance discounts, and pet insurance. 

The estimated salary range is meant to reflect an anticipated salary range for the position. We may pay more or less than of the anticipated range based upon market data and other factors, all of which are subject to change. Individual pay is based on location, skills and expertise, experience, and other relevant factors. 

Tsubaki is an Equal Opportunity Employer - Minorities/Females/Veterans/Disability

PM21

Compensation details: 11 Yearly Salary

PIe91863f570be-3631

Company 

Myrias Optics, Inc. is a fast-growing startup using proprietary nanoimprint technology to revolutionize the way optical components and systems are conceptualized, designed, and manufactured.  The company is positioned to disrupt markets across a wide range of applications including consumer electronics, AR/VR, 3D scanners and LiDAR, imaging systems, optical communications, medical equipment, optical computing and more. Our unique all-inorganic imprinted optics enable metalenses, diffractive optics, waveguides all manufactured using wafer level process.  By removing any organic material, we not only eliminate environmental and reliability issues but at the same time enable more complex designs with unmatched optical performance and highly cost-effective manufacturing.     

Website:   

POSITION – Senior Optical Design Engineer 

Reporting to the Lead, the Senior Optical Design Engineer will collaborate with a talented team of engineers and scientists to help envision and design cutting-edge Myrias Optics components and systems. Specifically, this position will head up Myrias’ design efforts, shaping the optical components and subsystem for our external customers and internal products.  This position will also be responsible for growing and managing the optical design team. This is an exciting opportunity for a highly motivated and capable engineer to gain expertise in the growing fields of meta-optics, waveguides, and diffractive optics.  Together, we can shape next-generation optical systems for consumer devices, AR/VR, medical instrumentation, automobiles, robotics, and more.  

POSITION TYPE: Full time, on-site  

Salary Range: $135,000 - $160,000

LOCATION: Amherst, MA 

RESPONSIBILITIES 

• In collaboration with the technical team, the candidate will perform day-to-day metasurface design and analysis based on Myrias’ proprietary all-inorganic nano-imprint materials and processes. 
• Expand Myrias’ design capabilities, including development of simulation workflows and modeling pipelines using in-house developed codes, to advance our unique and proprietary optical design environment.   
• Design and simulate optical components and sub systems (waveguides, diffractive optics, meta-optics, etc.)  
• Automate design tasks using Python and MATLAB for next-generation and future metasurface products.   
• Perform tolerance studies, optimize, and iterate on designs to meet manufacturing requirements for Myrias’ products.  
• Coordinate with process development and production teams to bridge the gap between design and manufacturing.  
• Support specification and acquisition of key design tools and hardware. 
• Providing customer support for new designs and products and participating in customer meetings. 
• Create detailed internal specification documents for simulation methodologies, design rules, and customer product reports. 

QUALIFICATIONS 

• Ph.D. or MS.c. with 5+ years of related experience in optical engineering, electrical engineering, or equivalent field. 
• Strong experience conducting design and simulation of optical components and systems, such as diffractive optics, imaging systems, optical waveguides, laser systems. 
• Solid understanding of metasurface physics, and diffractive, geometrical, and ray optics. 
• Proficiency in Python, MATLAB, and C/C++ for scientific computing, and workflow automation. 
• Extensive hands-on experience with commercial and custom optical design and simulation tools, including RCWA (e.g., S4), FDTD (Meep or Lumerical), Zemax/CodeV, and RSoft; familiarity with additional modeling techniques and tools such as TMM, FEM, LightTrans, etc., is highly desirable. 
• Proficiency with Windows, Linux, and macOS environments, as well as experience using SLURM for workload and job management. 
• Experience with optical characterization and the ability to experimentally validate designs in a laboratory setting. 
• Strong interpersonal and technical communication skills. 
• Familiarity with CAD design packages (e.g., SolidWorks or AutoCAD) are desirable. 
• Familiarity with imprint or nanofabrication processes and cleanroom experience are a plus. 
• Ability to bridge technology development with commercial demands.  
• Comfortable with the fast-paced startup or early-stage business environment. 
• Entrepreneurial spirit, detail-oriented, and self-driven with a hands-on, roll-up-the-sleeves mentality.  

PREFERRED QUALIFICATIONS 

• Experience developing custom simulation tools and optimization pipeline. 
• Experience with integrating machine learning and inverse design methods into metasuface design process. 

WHAT WE OFFER 

• Competitive Compensation Package, including equity 
• Full Medical and Dental plans 
• Insurance: Company paid disability insurance 
• Paid time off: Vacation and sick time 

EEO Statement 

Myrias Optics is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. 

APPLY 

If you are interested in the role, please submit your resume in .pdf format with a title of “[First name] [last name] Resume” to