Engineering Structures Impact Factor Jobs in Norridge Illinois

POSITION PURPOSE

Working within assigned areas, performs on-going Planned Maintenance (PM) and Corrective Maintenance (CM) of diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned  Maintenance (PM) schedules and repairs of assigned clinical equipment. 

Assumes responsibility for Preventive Maintenance (PM) and repair of clinical equipment as assigned by Clinical Engineering (CE) Manager.  Resolves sensitive or complex problems with supervision. 

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair of radiological and general medical equipment.  Makes recommendations regarding imaging test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training sessions on equipment maintenance in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service or coordinates training to radiology clinical/professional staff on proper use and safety of radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I and II as assigned.

Provide on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by the results of customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making.  Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May perform duties as Lead Biomedical Equipment Technician or other duties as assigned or required by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

One to two years of equivalent experience performing corrective and planned maintenance on diagnostic x-ray, ultrasound and other equipment including but not limited to Mobile, Carms, Radiology Rooms, Dental units, Simulators, Film Processors, laser Camera, CRs, Alternators, 1st Look Nuclear Cameras, etc.  Related experience operating complex testing equipment, including but not limited high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must have a basic understanding of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, , EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission,  and NFPA standards as well as state and federal regulations.

Working knowledge and ability to use basic hand tools and the test equipment specific to imaging and biomedical modalities.

Ability to analyze and interpret information provided by clinical staff and equipment to determine operational condition, and ability to follow complex written instructions, perform tasks and document actions taken.

Must have basic understanding of personal computer operation,  applications, and  ability to input data using a keyboard.  Network training preferred.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, hospital, and Clinical Engineering.

Strong communication and inter-personal skills are required to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and frequently changing work priorities.

 Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Compensation:

Pay Range: $31.87 - $47.81 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

POSITION PURPOSE

Working within assigned areas, performs on-going Planned Maintenance (PM) and Corrective Maintenance (CM) of diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned  Maintenance (PM) schedules and repairs of assigned clinical equipment. 

Assumes responsibility for Preventive Maintenance (PM) and repair of clinical equipment as assigned by Clinical Engineering (CE) Manager.  Resolves sensitive or complex problems with supervision. 

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair of radiological and general medical equipment.  Makes recommendations regarding imaging test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training sessions on equipment maintenance in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service or coordinates training to radiology clinical/professional staff on proper use and safety of radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I and II as assigned.

Provide on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by the results of customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making.  Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May perform duties as Lead Biomedical Equipment Technician or other duties as assigned or required by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

One to two years of equivalent experience performing corrective and planned maintenance on diagnostic x-ray, ultrasound and other equipment including but not limited to Mobile, Carms, Radiology Rooms, Dental units, Simulators, Film Processors, laser Camera, CRs, Alternators, 1st Look Nuclear Cameras, etc.  Related experience operating complex testing equipment, including but not limited high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must have a basic understanding of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, , EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission,  and NFPA standards as well as state and federal regulations.

Working knowledge and ability to use basic hand tools and the test equipment specific to imaging and biomedical modalities.

Ability to analyze and interpret information provided by clinical staff and equipment to determine operational condition, and ability to follow complex written instructions, perform tasks and document actions taken.

Must have basic understanding of personal computer operation,  applications, and  ability to input data using a keyboard.  Network training preferred.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, hospital, and Clinical Engineering.

Strong communication and inter-personal skills are required to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and frequently changing work priorities.

 Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Compensation:

Pay Range: $31.87 - $47.81 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

POSITION PURPOSE

Working within assigned areas, performs on-going Planned Maintenance (PM) and Corrective Maintenance (CM) of diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned  Maintenance (PM) schedules and repairs of assigned clinical equipment. 

Assumes responsibility for Preventive Maintenance (PM) and repair of clinical equipment as assigned by Clinical Engineering (CE) Manager.  Resolves sensitive or complex problems with supervision. 

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair of radiological and general medical equipment.  Makes recommendations regarding imaging test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training sessions on equipment maintenance in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service or coordinates training to radiology clinical/professional staff on proper use and safety of radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I and II as assigned.

Provide on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by the results of customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making.  Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May perform duties as Lead Biomedical Equipment Technician or other duties as assigned or required by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

One to two years of equivalent experience performing corrective and planned maintenance on diagnostic x-ray, ultrasound and other equipment including but not limited to Mobile, Carms, Radiology Rooms, Dental units, Simulators, Film Processors, laser Camera, CRs, Alternators, 1st Look Nuclear Cameras, etc.  Related experience operating complex testing equipment, including but not limited high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must have a basic understanding of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, , EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission,  and NFPA standards as well as state and federal regulations.

Working knowledge and ability to use basic hand tools and the test equipment specific to imaging and biomedical modalities.

Ability to analyze and interpret information provided by clinical staff and equipment to determine operational condition, and ability to follow complex written instructions, perform tasks and document actions taken.

Must have basic understanding of personal computer operation,  applications, and  ability to input data using a keyboard.  Network training preferred.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, hospital, and Clinical Engineering.

Strong communication and inter-personal skills are required to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and frequently changing work priorities.

 Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Compensation:

Pay Range: $31.87 - $47.81 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

POSITION PURPOSE

Working within assigned areas, performs on-going Planned Maintenance (PM) and Corrective Maintenance (CM) of diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned  Maintenance (PM) schedules and repairs of assigned clinical equipment. 

Assumes responsibility for Preventive Maintenance (PM) and repair of clinical equipment as assigned by Clinical Engineering (CE) Manager.  Resolves sensitive or complex problems with supervision. 

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair of radiological and general medical equipment.  Makes recommendations regarding imaging test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training sessions on equipment maintenance in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service or coordinates training to radiology clinical/professional staff on proper use and safety of radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I and II as assigned.

Provide on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by the results of customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making.  Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May perform duties as Lead Biomedical Equipment Technician or other duties as assigned or required by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

One to two years of equivalent experience performing corrective and planned maintenance on diagnostic x-ray, ultrasound and other equipment including but not limited to Mobile, Carms, Radiology Rooms, Dental units, Simulators, Film Processors, laser Camera, CRs, Alternators, 1st Look Nuclear Cameras, etc.  Related experience operating complex testing equipment, including but not limited high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must have a basic understanding of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, , EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission,  and NFPA standards as well as state and federal regulations.

Working knowledge and ability to use basic hand tools and the test equipment specific to imaging and biomedical modalities.

Ability to analyze and interpret information provided by clinical staff and equipment to determine operational condition, and ability to follow complex written instructions, perform tasks and document actions taken.

Must have basic understanding of personal computer operation,  applications, and  ability to input data using a keyboard.  Network training preferred.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, hospital, and Clinical Engineering.

Strong communication and inter-personal skills are required to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and frequently changing work priorities.

 Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Compensation:

Pay Range: $31.87 - $47.81 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

ESSENTIAL FUNCTIONS

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment. Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I, IIand  Senior Biomed as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Compensation:

Pay Range: $47.23-70.84 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

ESSENTIAL FUNCTIONS

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment. Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I, IIand  Senior Biomed as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Compensation:

Pay Range: $47.23-70.84 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

ESSENTIAL FUNCTIONS

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment. Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I, IIand  Senior Biomed as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Compensation:

Pay Range: $47.23-70.84 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

ESSENTIAL FUNCTIONS

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment. Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I, IIand  Senior Biomed as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Compensation:

Pay Range: $47.23-70.84 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Schaumburg, Illinois, USA Job Description

Location: Schaumburg, IL (Hybrid work schedule)

Are you looking for a unique vehicle to a successful career? NTN Bearing Corporation (NBCA) has employment opportunities that will assist qualified candidates to achieve their desired goals. NTN is one of the world's premier bearing manufacturers serving the automotive and industrial markets for the past 100 years. Proven stability, growing sales and career opportunities are a few of the factors that set NTN apart. NTN is currently seeking an Account Support Representative in our Mt. Prospect office.

The Account Support Representative is the customer's main point of contact. The ASR is responsible for placing orders, checking the status of orders, and for product price/availability information. The ASR represents the customer's interest when interacting with various departments within NTN. This position has significant interactions with Logistics, Credit, Engineering, Marketing, Sales, Inventory Planning and the Warehouses. The ASR ensures that each customer has a positive experience with NTN.

Major Responsibilities

• Provide quality service to customers.
• Sales Support, understand order processing and expedite orders.
• Responding to inventory inquiries. Solution driven and team oriented.
• Credit/Debit Requests.
• Understand NTN Procedures, Principles and Practices.
• Forecast Analysis
• Review Electronic Data Interchange Output
• Analyze Quality and Delivery Reports received from Customers
• Analyze Open Order Reports for customers.
• Pull and enter data into Customer Portals.
• Knowledge of EDI process

Requirements, Knowledge, Skills And Abilities

• Bachelor's Degree preferably in business or related field; or three to five years of related experience.
• Account management-related experience preferred.
• Demonstrated proficiency with customer focus with the ability to engage and diffuse dissatisfied customers.
• Proficiency in Microsoft Office, JDE/ Oracle experience preferred.
• Strong written and verbal communication skills.
• Effective organizational/time management skills with the ability to multi-task.

The actual base pay offered to the successful candidate will be based on multiple factors, including but not limited to job-related knowledge/skills, experience, business needs, geographical location, and internal equity. At NTN, it is not typical for an individual to be hired at or near the top end of the range for their role, and compensation decisions are dependent upon the facts and circumstances of each position and candidate. Pay range $45K - $53K annually.

NTN Bearing Corporation (NBCA) offers a full range of comprehensive benefits, including choice of medical plans, dental, vision, life and disability insurance, a cash matching 401(k) Plan, separate company contribution to your 401(k)-retirement account, paid vacation, and eligibility for tuition reimbursement. NTN Bearing Corporation is an equal opportunity employer.

All qualified applicants are encouraged to apply. Qualified candidates will be considered for employment without regard to race, color, religion, sex, or national origin. We further are committed to considering all qualified individuals with disabilities and will provide reasonable accommodation as needed throughout the hiring process. Qualified Veterans are encouraged to apply.

How To Apply

If you are interested in this employment opportunity, please visit our website at , click careers and apply.

COMPANY OVERVIEW:

Technetics Group Chicago is a leading designer and manufacturer of custom engineered mechanical seals for rotating shafts and precision components for aerospace and specialized industrial applications. #Technetics #Technetics Group

JOB OVERVIEW:

We are seeking a highly motivated and experienced Manufacturing Engineer to join our dynamic team. In this role, you will play a crucial part in optimizing our manufacturing processes, improving efficiency, and ensuring the production of high-quality components This role will involve working closely with cross-functional teams to ensure efficient and cost-effective manufacturing processes for new and existing products.

RESPONSIBILITIES:

• Process Development: Develop, optimize, and standardize processes, tooling/ fixturing, and equipment for new and legacy products, ensuring they meet quality, cost, and delivery requirements. Develops manufacturing procedures, methods, and standards; and monitors their proper execution. Responsible for new product introductions including routed processes, BOM's, In-Process drawings, gaging and including the design/procurement/manufacture of special tooling. Works proactively to prevent problems and prepares for upcoming jobs in advance of their scheduled start dates.
• CNC: Demonstrate a comprehensive understanding of CNC machine operations and the specific applications of various machines to effectively and accurately develop processes.
• Equipment Selection: Select and recommend appropriate machining equipment, tooling, and fixturing to support all departments and processes.
• Fixture Design: Design and implement fixtures and tooling to improve part accuracy, reduce setup times, and enhance overall productivity.
• Process Validation: Conduct process validation and capability studies to verify robustness and reliability. Implement quality control measures to monitor and maintain product quality. Analyze production data to identify and address quality issues. Collaborate with QA team to ensure compliance with customer requirements and industry standards.
• Documentation: Create and maintain detailed process documentation, including work instructions, routings, and quality plans. Develop and maintain standard operating procedures and training guides.
• Continuous Improvement: Identify and implement opportunities for process improvement to enhance efficiency, reduce costs, and improve quality. Take a leadership role in Set-up reduction. Stay up to date with the latest advancements in manufacturing technology and practices.
• Collaboration: Work closely with design engineers, manufacturing engineers, quality engineers, and manufacturing personnel to ensure smooth product launch. Incorporate feedback from prototype and production runs to correct job standards and work instructions.
• Problem Solving: Troubleshoot manufacturing issues and implement corrective actions.
• Other: Perform other related duties as assigned.

BASIC QUALIFICATIONS

• A bachelor's degree in engineering or equivalent job experience is required.
• A minimum of 5 years of direct experience in CNC programming, setup, and operating.
• Understanding of CNC machining.
• Understanding of secondary processes like heat treat, plating, and NDT.
• CAD skills are required– Siemens NX is a plus.
• CAM skills recommended
• ERP – familiarity with an ERP software (M2M preferred)
• Strong GD&T skills are required.
• Understanding of different types of materials for processing.
• Understanding of Root Cause Analysis.
• Microsoft Office skills are required.
• Knowledge of AS9100 standards is a plus.
• Excellent problem-solving skills are required.
• Knowledge of the 8-D problem solving method is a plus.
• Strong interpersonal skills are needed.

SUPERVISORY RESPONSIBILITIES

This position has no direct supervisory responsibilities.

Technetics is a subsidiary of Enpro, a leading industrial technology company focused on critical applications across many end-markets, including semiconductor, industrial process, commercial vehicle, sustainable power generation, aerospace, food and pharma, photonics and life sciences.

At Enpro, we believe that diversity drives innovation and inclusion fosters growth. We are committed to creating a workplace where everyone feels valued and respected. Our employment decisions are based on merit, qualifications, and business needs, without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability, genetic information, marital status, military service, or any other status protected by applicable law. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Human Resources, and we will make all reasonable efforts to accommodate your request.

Enpro Inc. is an equal opportunity employer. Legal authorization to work in the United States is required. We will not sponsor employment visas now or in the future for this job.

This position involves access to information that is subject to U.S. export controls. Any job offer made will be contingent upon the applicant’s capacity to serve in compliance with U.S. export controls.

Enpro carefully considers a wide range of compensation factors including the background, education, training, and experience required, as well as geographic considerations such as cost of labor, and applicable local and state laws. These considerations can cause offered compensation to vary. The hiring range for this position is typically $86,000 - $129,000 annually. The actual offer will be based on the individual candidate. Bonus, gainshare, and/or equity may be eligible for this position. Enpro offers a range of benefits including, but not limited to medical, dental, vision, life, 401(k) matching, and other supplemental insurance options.