Engineering Structures Impact Factor Jobs in Miami Florida Remote

1,278 positions found — Page 2

Senior Test Design Engineer
🏢 Belcan
Salary not disclosed
Miramar, FL 6 days ago

A Senior Test Engineer job in Miramar, FL 33027 is currently available through Belcan at one of our key aerospace clients. This is a four‑month contract role with the potential to convert to a direct hire. To be considered for this role the candidate will need to have 3-5 years of relevant experience.

Description

The Test Design Engineer is responsible for creating and performing test automation activities consistent with the test lead and test development goals/objectives. This role requires knowledge/experience with automated test software, manufacturing test environment and the ability to interpret test requirements, implement requirement-based test methodologies and trouble shoot & debug test and product issues. Experience with FAA Part 145 in an MRO environment highly desired.


Job Duties:

Specific duties will include:

SW/HW debug, troubleshoot, upgrade and maintain product automated test equipment.

Requirements Analysis/Review for test-ability

Test procedure development, implementation, execution and failure root cause analysis.

Test planning and preparation.

Assess System performance against requirements

Develop code in Veristand, Teststand, LabVIEW to implement test GUIs, drivers and test requirements.

Perform verification and validation testing on developed Automated Test Equipment (ATE).

Perform sub-system testing from bench level CCA functional testing to system level burn in testing against an ATP/QTP.

Develop and refine system and board level test cases and procedures.

Trouble shoot subsystem and system level failures to root cause.

Design test fixtures & cables to enable testing.

Perform verification and validation testing on developed Automated Test Equipment (ATE).

Bench test CCAs and test electronic sub-assemblies and rack based test systems (instruments, cables and interfaces).

Trouble shoot subsystem and system level failures to root cause.

Gather, configure and use appropriate test equipment to perform task - Power supplies, DVM, Oscilloscope, electronic loads, custom cables, etc.

Interpret test requirements and electrical test results.

Read electrical schematics.

Test planning, preparation & execution


Required Qualifications:

3 to 5 years of experience

Strong interpersonal skills

Strong analytical skills

B.S. or M.S. in Electrical Engineering, Electrical Engineering Technology, or related discipline desired

Will consider equivalent years of relevant experience in lieu of a formal degree

Experience working with or developing Automated Test Equipment (ATE).

Experience in hardware and test equipment troubleshooting experience.

Knowledge of test automation (HIL) using National Instruments Labview, TestStand and Veristand

Can operate independently


Desired Skills:

Excellent verbal and written communication skills.

Experience working independently and in a collaborative environment

Ability to react to project adjustments and alterations promptly and efficiently

Ability to effectively prioritize and execute tasks in a high-pressure environment

Familiarity with electronic components and common electronic test equipment.

Experienced using lab test equipment, power supplies, DVM, Oscilloscope, electronic loads

Ability to interpret test requirements and electrical test results.

Ability to conduct detailed failure analysis and develop and implement root cause corrective actions.

Experience with GIT, Tortoise SVN, or equivalent software configuration management tools

Previous experience with CAN, UDS, RS232, RS422 & 1553 communication protocols.

Previous experience with programming languages such as C, C++ & C#.

Previous experience with Visual Studio.


Compensation:

This position is offering an salary rate of $52.88 - $62.50/hr, however, Belcan considers several factors when extending an offer, including but not limited to education, experience, geographic location, and discipline. Benefits offered may include health care, dental, vision, life insurance; 401(k); education assistance; paid time off including PTO, holidays, and any other paid leave required by law.


Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, color, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws.


Not Specified
ICC Reinforced Concrete Special Inspector
Salary not disclosed
Miami, FL 2 days ago

Job Summary

Fenagh Engineering & Testing is actively seeking a skilled and experienced ICC Reinforced Concrete Special Inspector for field and laboratory testing services in the Miami, FL area.

Duties

  • Conduct thorough inspections of reinforced concrete work on construction sites, ensuring adherence to design specifications, codes, and safety standards.
  • Verify proper concrete forming techniques, placement, curing processes, and reinforcement installation.
  • Perform quality control tests and collect data related to concrete strength, mix consistency, and material properties through laboratory experience or field testing.
  • Monitor masonry work and ensure compliance with project plans and specifications.
  • Document inspection findings accurately through detailed reports, photographs, and checklists; communicate issues promptly to project teams.
  • Analyze inspection data to identify potential deficiencies or deviations from standards; recommend corrective actions as needed.
  • Review contracts and technical documents related to concrete work to ensure scope compliance and quality expectations are met.


Qualifications

  • ICC Reinforced Concrete Special Inspector certification required.
  • Proven experience in construction inspection with a focus on reinforced concrete structures; prior laboratory experience is highly desirable.
  • Strong knowledge of construction site procedures, concrete forming techniques, masonry practices, and quality control processes.
  • Familiarity with construction contracts, drawings, specifications, and relevant building codes.
  • Demonstrated ability to collect, analyze, and interpret data accurately for quality inspections.
  • Excellent communication skills for reporting findings clearly and collaborating with contractors and project teams.
  • Knowledge of analysis skills related to concrete testing methods and quality assurance procedures. Join us in delivering safe, durable infrastructure by ensuring reinforced concrete structures meet the highest standards! Your expertise will help shape the future of construction projects while advancing your professional growth in a dynamic environment committed to excellence.
Not Specified
Construction Superintendent
Salary not disclosed
Miami, FL 2 days ago

Position Overview

Structural-Builders & Restorations (S-BR) is seeking an experienced Superintendent to lead field operations for commercial projects throughout South Florida. This role is responsible for managing all on-site activities, coordinating labor and materials, enforcing safety compliance, and ensuring work is executed in accordance with project plans, specifications, and industry standards.

Our projects often involve high-rise buildings, occupied structures, and complex access conditions requiring the use of swing stages, scaffolding systems, aerial lifts, and other engineered access equipment. The ideal candidate brings strong leadership, excellent networking with local leading manufacturers, and the ability to manage multiple crews in fast-paced environments.


Key Responsibilities

The role’s responsibilities include, but are not limited to, the following:

• Supervise day-to-day field operations

• Coordinate manpower, subcontractors, deliveries, and equipment usage

• Review project drawings, specifications, and submittals to ensure proper system installation

• Ensure compliance with OSHA regulations and company safety policies

• Conduct daily safety meetings and enforce fall protection protocols

• Coordinate inspections with Project Management and third-party inspectors

• Monitor project schedules and proactively address delays or conflicts

• Maintain quality control and ensure installations meet manufacturer requirements

• Submit daily field reports and track progress using company reporting platforms (e.g., Raken)

• Assist with project phasing and logistics planning for occupied buildings


Qualifications

• 5+ years of experience as a Superintendent or Foreman on commercial projects

• Experience working at heights and with access systems such as lifts, scaffolds, and swing stages

• Ability to read and interpret construction drawings and specifications

• OSHA 30 Certification preferred

• Knowledge of South Florida building codes and permitting processes preferred

• Strong leadership and communication skills

• Bilingual English/Spanish is a plus



At S-BR, we believe in fostering a supportive and collaborative work environment where employees are encouraged to grow and develop their skills.

We offer competitive compensation packages, including health, dental, and vision insurance, retirement plans with company matching, and paid time off plus holidays.

Our culture is emphasized by volunteer opportunities, continuous learning, team bonding, and team-building events. We are committed to diversity and inclusion and ensuring that every team member feels valued and empowered to contribute to our shared success.

Join us and be part of a dynamic team that values innovation, teamwork, and excellence in everything we do! We are proud members of leading organizations such as the International Concrete Repair Institute (ICRI), Post Tension Institute (PTI), Associated Builders and Contractors (ABC), and the Construction Association of South Florida (CASF), reinforcing our commitment to industry standards, quality, and continuous improvement.


We are unable to provide sponsorship at this time.

Not Specified
Director of Operations
Salary not disclosed
Miami, FL 2 days ago

About the Company



CAP Government, Inc. is seeking a Director of Operations that can provide professional and administrative work that includes planning, design, and construction of a wide variety of projects. The candidate should have at least three years relevant experience and will function as the project manager on major projects for municipal and educational clients. Some local travel may be required for inspections and managing projects in the assigned area. We currently have positions available in our Miami-Dade office. Talent is the essence of meeting our client's objectives, goals, and challenges. Candidates must possess excellent organizational, analytical, and interpersonal skills.



About the Role



Manage all aspects of small to intermediate projects throughout the development lifecycle, including project scope, schedule, resources, quality, costs and change.



Responsibilities



  • Work closely with stakeholders and to define project parameters, then translate customer needs into formal requirements, using knowledge of the industry and delivery methodology.
  • Develop detailed project schedule, resource plan, and status reports, managing task assignment to project resources and reporting on and managing project scope throughout the lifecycle.
  • Manage projects and maintain schedule, budget, and profitability of assigned projects, overseeing the preparation of plans, specifications, and proposals.
  • Ensure all legal requirements, building and safety codes, safety inspections, city guidelines, and local and state regulations are met.
  • Oversee and supervise construction project progress and provide reports on timeline, progress, and adjustments.
  • Coordinate with other design disciplines such as structures, hydraulics, traffic, and utilities, etc.
  • Collaborate with management to determine long-range plans and objectives, including recommendations on project staffing, evaluating, and mentoring subordinate staff.
  • Review, monitor, and develop complex layouts, sketches, plans, specifications and estimates, standards and guidelines, correspondence, and prepare reports.
  • Participate in the preparation of technical proposals and labor estimates.
  • Maintain positive client relationships.
  • Efficiently manage a team of employees across multiple projects.
  • Lead in the formulation of advance technical concepts in proposal development, preliminary design phases, and presentations to client.
  • Represent respective projects at meetings and conferences.
  • Support efforts in proposal development, project scoping as well as with client relationship.
  • Perform other related duties as assigned by the Manager.


Qualifications



  • Bachelor's degree in Building Construction, Construction Management, Civil Engineering, or Architecture or related field from an accredited university.
  • Five years of experience in mixed-use project development, management, administration, and inspection along with a demonstrated knowledge of construction, engineering, architecture principles & construction techniques.
  • Skill in managing multiple projects simultaneously.
  • Experience in dealing with municipal agencies.
  • Professional Engineering License in Florida OR Registered Architect License in Florida is required.
  • Building Official License in Florida is a plus.
  • Experience with municipal inspections is required.


Required Skills



  • Excellent organizational skills.
  • Strong analytical skills.
  • Interpersonal skills.


Preferred Skills



  • Experience in proposal development.
  • Knowledge of construction techniques.


Pay range and compensation package



The salary range for this role is $105-140K annually, subject to potential increases contingent upon factors such as experience, licenses, or certifications. Our Health and Welfare Benefits are designed to meet your needs, with eligibility starting on your first day of employment:



  • Medical, Dental, and Vision coverage
  • Company-matched Retirement plan
  • Generous Paid Time Off and Company Holidays
  • Life Insurance and AD&D coverage
  • Short-Term Disability (STD) and Long-Term Disability (LTD)
  • Optional life and pet insurance
  • EAP and Total Wellbeing Lifestyle Programs
  • Tuition Assistance and/or Professional Development
  • Employee Discounts


This information is transparently provided in adherence to several state and local Equal Pay and Pay Transparency Laws.



Equal Opportunity Statement



Our firm is committed to diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, disability, protected veteran status, gender identity, or any other factor protected by applicable federal, state, or local laws.



Join us at Bureau Veritas, where your well-being and professional growth are our top priorities.

Not Specified
Clinical Operations Excellence Specialist
🏢 ChenMed
$99,369 to $141,957 per year
Miami, FL 3 days ago

We’re unique.  You should be, too.

We’re changing lives every day.  For both our patients and our team members. Are you innovative and entrepreneurial minded? Is your work ethic and ambition off the charts?  Do you inspire others with your kindness and joy?

We’re different than most primary care providers. We’re rapidly expanding and we need great people to join our team.

The Operational Excellence Specialist is a strategic and results-oriented individual responsible for helping create significant and sustainable improvements across all aspects of ChenMed's operations. This role is an independent contributor, who will support the development and implementation of innovative operational strategies, and will leverage data and analytics to identify and address key performance areas.

ESSENTIAL JOB DUTIES/RESPONSIBILITIES:

  • Supports the development of the overall operational strategy for ChenMed, aligning with the company's strategic goals and objectives.
  • Helps establish and monitors key performance indicators (KPIs) across all operational areas, including patient satisfaction, efficiency, quality, and cost-effectiveness.
  • Helps develop and implement data-driven decision-making processes to identify areas for improvement and track progress towards operational goals.
  • Works cross-functionally to identify, analyze, and address critical operational challenges, such as bottlenecks, inefficiencies, and quality gaps.
  • Supports the implementation of innovative operational solutions, such as automation, technology, and process re-engineering, to enhance efficiency and effectiveness.
  • Maintains a deep expert knowledge of ChenMed’s Center and Leader Playbooks to answer any questions from field leaders or staff regarding operational processes, as well as performance excellence reporting, tools, or training.
  • Supports and manage organizational change initiatives related to operational transformations, ensuring smooth and effective transitions.
  • Delivers leadership training programs focused on operational excellence, change management, and continuous improvement methodologies.
  • Performs other duties as assigned and modified at manager’s discretion.
KNOWLEDGE, SKILLS AND ABILITIES:
  • Advanced-level business acuity
  • In-depth knowledge and understanding of general/core job-related functions, practices, processes, procedures, techniques and methods
  • Driven, strategic, motivated, and has a forward-leaning approach to business
  • Strong analytical and critical thinking/problem solving skills, with the ability to identify areas of improvement and implement changes effectively
  • Ability to analyze data and metrics to create actionable items for leaders to optimize and implement
  • Commitment to data-driven evaluation of initiatives and service levels
  • Strong business acumen and presentation skills
  • Exceptional learning agility and servant mindset
  • Exceptional written and interpersonal communication skills
  • Strong desire and willingness to provide both consultative/advisory support and hands-on execution
  • Strong process and meeting facilitation skill
  • Ability to structure ambiguous problems, think creatively, and lead teams to generate solutions
  • Ability to effectively operate in a fast-paced, ambiguous and evolving team environment
  • Mastery skill in Microsoft Office Suite products including Excel, Word, PowerPoint and Outlook; competent in other systems required for the position
  • Ability and willingness to travel locally, regionally and/or nationally, up to 20% of the time; flexible to work evening, weekends and/or holidays as needed
  • Spoken and written fluency in English
  • This job requires use and exercise of independent judgment
EDUCATION AND EXPERIENCE CRITERIA:
  • BA/BS degree in Business Administration, Public Health or a related field preferred OR additional experience above the minimum may be considered in lieu of the required education on a year-for-year basis
  • A minimum of 4 years of relevant experience in operations, strategic planning, business development, and/or management consulting.
  • Healthcare experience preferred.
  • Master’s degree in business administration, public health, or a related field preferred.
  • Experience with Lean Six Sigma highly desirable, preferably at a green belt or higher.
  • Project management experience highly desirable.

PAY RANGE:

$99,369 - $141,957 Salary

The posted pay range represents the base hourly rate or base annual full-time salary for this position. Final compensation will depend on a variety of factors including but not limited to experience, education, geographic location, and other relevant factors. This position may also be eligible for a bonuses or commissions.

EMPLOYEE BENEFITS

’re ChenMed and we’re transforming healthcare for seniors and changing America’s healthcare for the better.  Family-owned and physician-led, our unique approach allows us to improve the health and well-being of the populations we serve. We’re growing rapidly as we seek to rescue more and more seniors from inadequate health care. 

ChenMed is changing lives for the people we serve and the people we hire.  With great compensation, comprehensive benefits, career development and advancement opportunities and so much more, our employees enjoy great work-life balance and opportunities to grow.  Join our team who make a difference in people’s lives every single day.

Current employees, if you want to apply to our internal career site, please click HERE

Current Contingent Worker please see job aid HERE to apply

#LI-Onsite
permanent
Principal Mechanical Integration Engineer – DCI Pipes, Frames and Structures (REMOTE) - Cutting-edge Data Center Projects (WASHINGTON)
✦ New
Salary not disclosed
Job Title: Principal Mechanical Design Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

- Lead mechanical design reviews and contribute to cross-functional design validation efforts.

- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

- Conduct root cause analysis and corrective actions for mechanical failures or field issues.

- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience:

- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

- Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices

- Comfortable working as part of a global team

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Able to mentor less experienced engineers

- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering

- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

- Active Professional Engineer (PE) license.

- Knowledge of regulatory and safety standards applicable to data center infrastructure.

- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Integration Engineer - DCI Pipes, Frames and Structures (REMOTE)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Kyle, TX, Remote 4 days ago
Job Title : Principal Mechanical Design Engineer
Job Family : Mechanical Design Engineering
Organization : Data Center Infrastructure Team
Location : Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?
Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
Lead mechanical design reviews and contribute to cross-functional design validation efforts.
Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
Conduct root cause analysis and corrective actions for mechanical failures or field issues.
Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
May perform other duties and responsibilities as assigned

How will you get here? 
Education :
~ Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience :
~8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
~ Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
~ Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
~ Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
~ Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:
Excellent interpersonal and communication skills
Creative, self-motivated, accountable, and team-oriented
Able to work independently with minimal oversight
Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
Skilled in writing reports, business correspondence, and procedural guides
Effective at presenting information and responding to management, clients, and public queries
Capable of influencing others and sharing best practices
Comfortable working as part of a global team
Capable of assessing projects, articulating risks, and developing project milestones
Familiar with stage-gate processes in project lifecycle management (PLCM)
Able to mentor less experienced engineers
Ability to travel both domestically and internationally up to 30%

Preferred Qualifications:  
Master’s Degree in Mechanical Engineering
Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
Active Professional Engineer (PE) license.
Knowledge of regulatory and safety standards applicable to data center infrastructure.
Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
permanent
Principal Mechanical Integration Engineer – DCI Pipes, Frames and Structures (REMOTE)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
Lead mechanical design reviews and contribute to cross-functional design validation efforts.
Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
Conduct root cause analysis and corrective actions for mechanical failures or field issues.
Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
May perform other duties and responsibilities as assigned
How will you get here?
Education:
Bachelor's Degree in Mechanical Engineering or related engineering discipline.
Experience:
8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
Excellent interpersonal and communication skills
Creative, self-motivated, accountable, and team-oriented
Able to work independently with minimal oversight
Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
Skilled in writing reports, business correspondence, and procedural guides
Effective at presenting information and responding to management, clients, and public queries
Capable of influencing others and sharing best practices
Comfortable working as part of a global team
Capable of assessing projects, articulating risks, and developing project milestones
Familiar with stage-gate processes in project lifecycle management (PLCM)
Able to mentor less experienced engineers
Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
Master's Degree in Mechanical Engineering
Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
Active Professional Engineer (PE) license.
Knowledge of regulatory and safety standards applicable to data center infrastructure.
Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
permanent
REO Resiliency Engineering and Quality Leader (Hybrid)
✦ New
Salary not disclosed

*At Securian Financial the internal position title is Infrastructure Dir."

Mission

"To lead the engineering discipline that ensures Securian's technology platforms and cloud services are built and operated with uncompromising resilience, performance, and quality. This role drives the design and automation of fault-tolerant, high-availability architectures across AWS, Azure, and GCP-ensuring the enterprise meets resiliency, scalability, and efficiency expectations at every layer of technology."

Positioning

The Director of Resilience Engineering and Quality Leader is both a strategic peer and technical counterpart to the Infrastructure & Reliability Engineering Leader.

This role provides bench depth and succession coverage for REO's most technically complex domains while driving innovation in reliability, resilience, and performance practices.

  • Strategic influence: Shapes cloud reliability, quality engineering, and resilience strategy across REO and Architecture domains.

  • Operational authority: Leads Sr. Managers and Managers who own the execution of quality, resilience, and performance engineering capabilities.

  • Enterprise collaboration: Works hand-in-hand with Technology, Solution, Business, Data, and Enterprise Architects to embed reliability and resilience as core architecture principles.

Scope of Accountability

Resilience Engineering & Cloud Reliability

  • Architect and validate fault-tolerant, regionally resilient architectures across AWS, Azure, and GCP.

  • Own resilience automation, chaos testing, and IaC-based recovery validation.

  • Lead cross-cloud reliability design reviews and failure-mode analyses for critical systems.

Quality Engineering & Continuous Testing

  • Define enterprise-wide quality engineering strategy integrated into CI/CD pipelines.

  • Drive automation-first testing (functional, non-functional, performance, resilience).

  • Embed observability-driven quality validation and contract testing across services.

Performance, Capacity & Efficiency Engineering

  • Oversee predictive capacity planning, scaling automation, and cost/efficiency optimization (FinOps/GreenOps).

  • Partner with Platform & Infrastructure teams to tune performance across application and platform layers.

  • Measure and report on performance SLIs/SLAs aligned to REO's Reliability Metrics framework.

Cross-Domain Architecture Collaboration

  • Partner with Enterprise Architects to codify resilience and reliability standards in technology blueprints.

  • Collaborate with Technology & Solution Architects to design service reliability into delivery architectures.

  • Engage Data Architects for data resilience, replication, and pipeline reliability.

  • Work with Business Architects to align technical reliability goals with critical business outcomes.

Leadership & Talent Development

  • Lead a team of Sr. Managers and Managers, fostering a high-performance, hands-on engineering culture.

  • Build and mentor top-tier technical talent in cloud reliability, resilience, and quality automation.

  • Partner with HR and REO Enablement to develop succession plans and technical competency frameworks.

Core Technical Competencies

  • AWS (primary) - Multi-account design, HA architecture, region failover, resilience automation, Terraform/CDK/CloudFormation.

  • Azure & GCP (secondary) - Compute, networking, and reliability constructs; hybrid cloud design and failover integration.

  • Infrastructure as Code (IaC) - Deep proficiency in Terraform, policy-as-code (OPA/Conftest), drift detection, pipeline integration.

  • Reliability & Chaos Engineering - AWS Fault Injection Simulator, Gremlin, steady-state hypothesis design.

  • Observability & Quality Automation - OpenTelemetry, Prometheus, CloudWatch, K6, Gatling; CI/CD quality gates and dashboards.

  • Performance Engineering - Load, stress, and soak testing automation; performance profiling and SLO alignment.

  • Disaster Recovery Automation - Cross-region orchestration, IaC-driven DR runs, replication validation.

  • FinOps/GreenOps - Cloud cost and efficiency automation, carbon-aware scaling policies.

Leadership Competencies

  • Strategic Technical Leadership: Operates at the intersection of deep engineering and executive strategy.

  • Multi-Domain Collaborator: Integrates reliability and resilience across architecture, operations, and business domains.

  • Talent Multiplier: Develops and empowers senior managers, fostering engineering mastery and innovation.

  • Credible Technical Authority: Trusted peer to Infrastructure & Reliability Engineering; capable of leading architecture reviews and executive briefings.

  • Change Champion: Drives transformation of reliability practices across platforms, pipelines, and teams.

Qualifications & Experience

  • 12+ years in cloud engineering, reliability, or platform leadership roles.

  • 5+ years leading Sr. Managers/Managers in technical domains.

  • Proven expertise across AWS, with working knowledge of Azure and GCP.

  • Experience with multi-cloud governance, DR design, IaC at scale, and reliability automation.

  • Strong understanding of observability, SRE principles, and REO/ITIL-aligned reliability frameworks.

  • Certifications:

    • Required: AWS Certified Solutions Architect - Professional

    • Preferred: AWS DevOps Engineer, Azure Solutions Architect Expert, Google Professional Cloud Architect

Success Metrics

  • 99.9% availability maintained for Tier-1 workloads.

  • 100% coverage of DR automation for Tier-1 services.

  • 25% annual increase in automated quality/test coverage.

  • 15% annual improvement in resource efficiency and cost performance.

  • Documented resilience participation across all enterprise architecture blueprints.

  • Positive "technical peer readiness" and succession rating from Head of REO.

Summary Value Proposition

This Director role blends deep AWS reliability engineering expertise, multi-cloud technical breadth, and leadership scale.

It ensures REO maintains both technical depth and leadership redundancy, and it strengthens the bridge between engineering execution and enterprise architecture alignment.

#LI-hybrid **This position will be in a hybrid working arrangement.**


Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes), you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.

The estimated base pay range for this job is:

$145,000.00 - $267,000.00

Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.

Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:

Paid time off:

  • We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.

  • Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.

  • Holidays: Securian provides nine company paid holidays.

Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.

Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.

Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.

Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:

  • Mental Wellness and Disability

  • Pride at Securian Financial

  • Securian Young Professionals Network

  • Securian Multicultural Network

  • Securian Women and Allies Network

  • Servicemember Associate Resource Group

For more information regarding Securian's benefits, please review our Benefits page.

This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.

Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).

To view our privacy statement click here

To view our legal statement click here


Remote working/work at home options are available for this role.
Not Specified
Remote Engineering Lead (Remote)
✦ New
🏢 GoDaddy
Salary not disclosed
Remote, Oregon 4 hours ago

Location Details: Remote - United States

At GoDaddy, the future of work looks different for each team. Some teams work in the office full-time, others have a hybrid arrangement (they work remotely some days and in the office some days), and some work entirely remotely.

This is a remote position, so you'll be working remotely from your home. You may occasionally visit a GoDaddy office to meet with your team for events or meetings.  

This position is not eligible to be performed in Alaska, Mississippi, North Dakota, or the Virgin Islands.

GoDaddy is not currently considering candidates for this role in California, Seattle, or NYC.

Join our team

The GoCaaS (GoDaddy Content As A Service) team powers GoDaddy's generative AI platform. We enable internal teams to securely build, deploy, and scale AI capabilities across the company—driving innovation, productivity, and customer impact. Our platform supports 100+ large language models across multiple vendors (OpenAI, Google, Anthropic, AWS) with 99.99% uptime, serving thousands of employees and dozens of teams.

What you'll get to do...

  • Lead and develop a high-performing engineering team delivering critical AI platform capabilities while mentoring engineers to deliver quality software efficiently.
  • Partner with cross-functional teams (product, design, and engineering leaders) to define and execute the GoCaaS roadmap and strategic initiatives.
  • Drive platform excellence by ensuring reliability, scalability, and optimal developer experience for internal AI consumers.
  • Champion engineering best practices, including CI/CD, observability, and secure software development across the organization.
  • Collaborate with enterprise teams (security, data, infrastructure) to deliver enterprise-grade AI solutions while fostering a culture of experimentation and technical excellence.

Your experience should include...

  • 6+ years of software engineering experience with at least 2 years in engineering management or tech lead roles.
  • Proven leadership of backend/platform teams delivering production-scale services.
  • Strong cloud infrastructure knowledge (AWS, GCP, or Azure) and distributed systems expertise.
  • Hands-on programming skills in Python, Go, or Node.js with CI/CD and observability experience.
  • Leadership and project management abilities, including stakeholder management and cross-functional project delivery.

You might also have...

  • AI/ML Infrastructure Experience - Working with LLMs, RAG systems, or broader AI/ML infrastructure.
  • Container Orchestration - Familiarity with Kubernetes and Docker.
  • Security & Privacy - Experience with secure data handling and privacy frameworks.
  • Developer Platform Background - Experience building internal tooling or developer platforms.
  • Leadership & Community Engagement - Passion for team building, mentoring engineers, and contributing to open-source initiatives.

We've got your back... We offer a range of total rewards that may include paid time off, retirement savings (e.g., 401k, pension schemes), bonus/incentive eligibility, equity grants, participation in our employee stock purchase plan, competitive health benefits, and other family-friendly benefits, including parental leave. GoDaddy's benefits vary based on individual role and location and can be reviewed in more detail during the interview process.

We also embrace our diverse culture and offer a range of Employee Resource Groups (Culture). Have a side hustle? No problem. We love entrepreneurs! Most importantly, come as you are and make your own way. 

About us...  GoDaddy is empowering everyday entrepreneurs around the world by providing the help and tools to succeed online, making opportunities more inclusive for all. GoDaddy is the place people come to name their idea, build a professional website, attract customers, sell their products and services, and manage their work. Our mission is to give our customers the tools, insights, and people to transform their ideas and personal initiative into success. To learn more about the company, visit About Us. 

At GoDaddy, we know diverse teams build better products—period. Our people and culture reflect and celebrate that sense of diversity and inclusion in ideas, experiences and perspectives. But we also know that's not enough to build true equity and belonging in our communities. That's why we prioritize integrating diversity, equity, inclusion and belonging principles into the core of how we work every day—focusing not only on our employee experience, but also our customer experience and operations. It's the best way to serve our mission of empowering entrepreneurs everywhere and making opportunity more inclusive for all. To read more about these commitments, as well as our representation and pay equity data, check out our Diversity and Pay Parity annual report, which can be found on our Diversity Careers page.

GoDaddy is proud to be an equal opportunity employer. GoDaddy will consider for employment qualified applicants with criminal histories in a manner consistent with local and federal requirements. Refer to our full EEO policy.

Our recruiting team is available to assist you in completing your application. If they could be helpful, please reach out to  

Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information.

GoDaddy doesn't accept unsolicited resumes from recruiters or employment agencies.


Remote working/work at home options are available for this role.
Not Specified
jobs by JobLookup
✓ All jobs loaded