Engineering Structures Impact Factor Jobs in Galveston Remote
896 positions found
U
Department of Cardiovascular Medicine Faculty Opportunities
✦ New
Salary not disclosed
Department of Cardiovascular Medicine Faculty Opportunities
Faculty Opportunity at the University of Texas Medical Branch (UTMB)
South of Houston/Galveston, TX
University of Texas Medical Branch (UTMB Health) – Galveston, Texas
UTMB Health is a $2.2 billion health science center comprised of five hospitals, an extensive network of outpatient clinics, and Schools of Medicine, Nursing, Health Professions, Public and Population Health, as well as a Graduate School of Biomedical Sciences, three institutes and over 10 exceptional research centers. UTMB has a long and remarkable history of advancing health sciences education, research, and patient care. It was the first academic health center in Texas and is home to the state’s first schools of medicine, nursing, and allied health sciences. UTMB is also home to the Galveston National Laboratory, one of only two laboratories conducting research on a university campus at the BSL-4 level in the U.S. Overall research funding has increased 20% over the past five years to $132 million and UTMB ranks 54th nationally in NIH funding among medical schools. UTMB also ranks as a five-star hospital by Vizient, for superior performance in providing high quality care.
The Department of Cardiovascular Medicine at UTMB Health has expanded significantly in recent years and now includes 33 faculty physicians (3 Electrophysiology, 5 Advanced Heart Failure, 8 Interventional, and 17 General Cardiology). The department also serves as the professional home for 32 fellows (26 in General Cardiology, 3 in Advanced Heart Failure, and 3 in Interventional Cardiology). Faculty enjoy the strong institutional support and infrastructure of UTMB Health, including four hospitals and numerous ambulatory clinics across the region. The department is committed to maintaining a positive, stable, and efficient work environment. The selected candidate will benefit from highly collaborative and intellectually stimulating interactions with faculty colleagues, fellows, and staff. Interest and experience in clinical research endeavors are highly desirable, though not required.
The Department is actively seeking the following Faculty Candidates:
- Heart Failure-Transplant Cardiologist - The Department of Cardiovascular Medicine at the University of Texas Medical Branch (UTMB Health) in Galveston, Texas, seeks an advanced Heart Failure and VAD / Transplant cardiologist to join its robust, academic cardiology practice at the level of Assistant or higher (all Academic ranks welcome). The successful candidate will become an integral part of our growing Department and the Sealy Heart and Vascular Institute (SHVI) and will work in a well-managed, robust cardiology practice with inpatient and outpatient clinical duties and a growing Heart Transplant and VAD program. The successful candidate should be board certified or eligible in ABIM, have undergone a structured heart failure fellowship and be able to obtain a valid Texas state medical license. Expertise in conducting clinical research trials is a plus but not required.
- Advanced Cardiac-Imaging Cardiologist - The Department of Cardiovascular Medicine at UTMB Health, seeks an Advanced Cardiac Imaging cardiologist to join its robust, academic cardiology practice at the level of Assistant Professor or higher (all Academic ranks welcome). The ideal candidate will have experience in multimodality imaging with requirement to have Level 3 fellowship training in Cardiac MRI and Cardiac CT. Structural echocardiography experience is preferred as well as board certifications in Echocardiography and Nuclear Cardiology. The successful candidate will join the Sealy Heart & Vascular Institute (SHVI) as an integral member of our team and will practice within a well-established, efficiently managed cardiology program. The position will have a primary clinical focus on advanced cardiac imaging - including cardiac MRI and CT - with a limited role in inpatient consultative services and a modest ambulatory clinic presence. The successful candidate should be board certified or eligible in ABIM, have undergone a structured advanced cardiac imaging fellowship and be able to obtain a valid Texas state medical license.
- Interventional Cardiology Faculty Opportunity - The Department of Cardiovascular Medicine at the University of Texas Medical Branch (UTMB Health) in Galveston, Texas, seeks an Interventional Cardiologist to join its growing academic cardiology practice (all Academic ranks welcome). The successful candidate will become an integral part of our growing Department and the Sealy Heart and Vascular Institute (SHVI) and will work in a well-managed, high-quality and robust multi-faceted cardiology practice with a large Cath Lab procedural volume. Besides coronary interventional skills, endovascular interventional skills are highly desired - and priority will be given to candidates with endovascular interventional skills and experience in the treatment of PAD. Additional experience in one or more of the following areas is also preferred: CHIP (Complex and High-Risk PCI), interventional heart failure, and/or catheter-based pulmonary embolism interventions. The Department is home to an ACGME-accredited Interventional Cardiology Fellowship program training 3 fellows per year. Successful candidates must be board certified (or BE) in ABIM and will have completed a General and Interventional Cardiology Fellowship program. They must also be able to obtain a valid, unrestricted Texas state medical license.
Compensation: A generous base salary is offered and is based upon Academic rank and experience with an obtainable RVU bonus program. Additional benefits include a relocation allowance, a superior family benefits program and an unsurpassed state retirement program.
Living in South Houston and Galveston, Texas: Information about living in the South Houston and Galveston service area can be found on the UTMB Living Website:
APPLY TODAY!! Send a Cover Letter and current Curriculum Vitae (CV) to
Skott Harrington -
UTMB Health strives to provide equal opportunity employment without regard to race, color, religion, age, national origin, sex, gender, sexual orientation, gender identity/expression, genetic information, disability, veteran status, or any other basis protected by institutional policy or by federal, state or local laws unless such distinction is required by law. As a Federal Contractor, UTMB Health takes affirmative action to hire and advance protected veterans and individuals with disabilities .
Not Specified
U
Nurse Clinician III (RN) - Interventional Radiology - Galveston (Casual Appointment; Float)
✦ New 🏢 UTMB Health
Salary not disclosed
Job Description
**Position may float to other campuses as needed (CLC, LCC or ADC)
REQUIRED EDUCATION & EXPERIENCE:
RN with two years of clinical RN experience. Must possess and maintain a current license or valid permit to practice in Texas. Current BLS required.
REQUIRED LICENSES/CERTIFICATIONS:
- RN
- BLS
JOB SUMMARY:
Competent Clinician. Possesses knowledge and skill to meet standards for competent professional nursing practice as specified in the Texas Nurse Practice Act. Experienced, knowledgeable and skilled in specialty area. Competently functions as a member of the interdisciplinary team. Practice is characterized by predominantly interdependent decision-making. Practice is problem focused and patient centered in the manner care is provided. Able to manage unexpected or emergency situations that are commonly seen in assigned specialty population. Serves as a resource for Nurse Clinician I or II. Can manage commonly seen contingency situations that arise on the clinical unit. Provides patient care through nursing practices based upon the American Nurses Association Standards of Professional Practice, and Professional Performance. Values specialty unit, nursing, and institutional strategic initiatives and health system goals.
ESSENTIAL JOB FUNCTIONS
Professional Practice:
Nursing Process
- Assesses, plans, implements, evaluates, and documents the daily care of assigned patients.
- Identifies nursing diagnoses/patient care needs. Develops and individualizes care plan and revises plan of care as needed.
- Executes physician's orders for all assigned patients. Administers medications and treatments and delivers culturally congruent and specialty appropriate competent nursing care in accordance with UTMB's policies, procedures, and standards in a caring and compassionate manner.
- Performs routine technical procedures/skills in specialty area assigned.
Patient/Family Teaching & Health Promotion
- Provides basic patient/family instruction and healthcare teaching based on identified learning needs (patient values, beliefs, barriers, and readiness to learn).
- Identifies potential impact of family dynamics*.
- Utilizes evidence-based resources to provide patient/family education.
- Uses Teach-Back to determine effectiveness and modifies strategies as needed.
Care Coordination & Delegation
- Plans, coordinates, and prioritizes patient care activities according to skill level and work complexity.
- Maintains safety and continuity of care using methods such as bedside shift report, hand-off tools/processes, inter-disciplinary rounding, etc.
- Demonstrates effective time management skills.
- Delegates appropriately, seeking guidance when needed.
- Demonstrates competent use of technology in the delivery of patient care.
Professional Performance:
Ethics (legal/regulatory), Advocacy & Culturally Congruent Cares
- Identifies ethical situations and seeks assistance, if necessary, to resolve.
- Utilizes available resources when ethical issues arise.
- Delivers culturally sensitive care using resources to meet the needs of patient/family.
- Serves as a patient advocate, seeking guidance when necessary.
Communication & Collaboration
- Supports healthy work environment by demonstrating respectful verbal and non-verbal communication with all members of the healthcare team. Seeks assistance for support with challenging communication.
- Recognizes colleagues when they go above and beyond in demonstrating UTMB’s core values.
- Plans, coordinates, and prioritizes patient care activities in collaboration with inter-professional team.
Leadership
- Recognizes informal and formal unit/hospital leaders and can educate colleagues regarding unit/hospital leadership.
- Recognizes unit, nursing, and institutional strategic initiatives and health system goals.
- Recognizes the importance of financial responsibility to promote fiscal health for the patient, unit and organization.
Education, Evidence-Based Practice & Research
- Attends/participates in unit meetings/activities and supports the philosophy and goals of the unit department and organization.
- Participates in shared leadership at the unit level*.
- Participates in unit based quality improvement activities.
- Attends in-services and continuing education activities.
- Participates in one journal club annually*.
- Completes the UTMB/Vizient™ Nurse Residency Program and completes an evidence based practice project as required*.
- Demonstrates commitment to lifelong learning (evidence-based practice, specialty certification, advanced degree, etc.).
- Demonstrates ability to accept and adopt change by seeking knowledge and needed information.
- Demonstrates knowledge of how to access and utilize evidence-based resources to guide patient care.
Quality, Resources & Safety
- Identifies patient safety concerns and reports appropriately; addresses immediate safety concerns appropriately.
- Identifies unit quality metrics/outcomes data and improvement activities; actively engages in discussion, activities related to unit goals.
- Demonstrates self-care through practices that support personal well-being, personal safety and injury prevention.
General Requirements:
- Completes required specialty specific Competency Based Orientation (CBO) tools by the initial performance evaluation due date for placement in employee file.
- Actively participates in ongoing self-evaluation of competency using Competency Based Orientation (CBO) tools and e-performance nursing appraisal.
- Completes the annual self-evaluation on time for competency and performance evaluation.
- Performs and reports point of care testing (POCT).
- Prioritizes and organizes work so that required assignments are completed within a specified time frame.
- Provides and maintains a clean, safe environment and performs and/or assists others to perform proper aseptic technique, isolation procedures and infection control measures.
- Practices basic cost containment for patients and the unit.
- Consistently completes accurate, concise and legible documentation for all patient, unit and hospital records (including care delivery and telephone patient related interactions).
- Competently utilizes electronic forms of communication and documentation.
- Meets periodic UTMB and unit specific compliance requirements for health screening, training, attendance, safety, and CPR.
- Adheres to internal controls and reporting structure.
SALARY RANGE:
Salary commensurate with experience.
WORK SCHEDULE:
Casual appointment (Up to 19.99 hours/week).
Equal Employment Opportunity
UTMB Health strives to provide equal opportunity employment without regard to race, color, religion, age, national origin, sex, gender, sexual orientation, gender identity/expression, genetic information, disability, veteran status, or any other basis protected by institutional policy or by federal, state or local laws unless such distinction is required by law. As a Federal Contractor, UTMB Health takes affirmative action to hire and advance protected veterans and individuals with disabilities.
**Position may float to other campuses as needed (CLC, LCC or ADC)
REQUIRED EDUCATION & EXPERIENCE:
RN with two years of clinical RN experience. Must possess and maintain a current license or valid permit to practice in Texas. Current BLS required.
REQUIRED LICENSES/CERTIFICATIONS:
- RN
- BLS
JOB SUMMARY:
Competent Clinician. Possesses knowledge and skill to meet standards for competent professional nursing practice as specified in the Texas Nurse Practice Act. Experienced, knowledgeable and skilled in specialty area. Competently functions as a member of the interdisciplinary team. Practice is characterized by predominantly interdependent decision-making. Practice is problem focused and patient centered in the manner care is provided. Able to manage unexpected or emergency situations that are commonly seen in assigned specialty population. Serves as a resource for Nurse Clinician I or II. Can manage commonly seen contingency situations that arise on the clinical unit. Provides patient care through nursing practices based upon the American Nurses Association Standards of Professional Practice, and Professional Performance. Values specialty unit, nursing, and institutional strategic initiatives and health system goals.
ESSENTIAL JOB FUNCTIONS
Professional Practice:
Nursing Process
- Assesses, plans, implements, evaluates, and documents the daily care of assigned patients.
- Identifies nursing diagnoses/patient care needs. Develops and individualizes care plan and revises plan of care as needed.
- Executes physician's orders for all assigned patients. Administers medications and treatments and delivers culturally congruent and specialty appropriate competent nursing care in accordance with UTMB's policies, procedures, and standards in a caring and compassionate manner.
- Performs routine technical procedures/skills in specialty area assigned.
Patient/Family Teaching & Health Promotion
- Provides basic patient/family instruction and healthcare teaching based on identified learning needs (patient values, beliefs, barriers, and readiness to learn).
- Identifies potential impact of family dynamics*.
- Utilizes evidence-based resources to provide patient/family education.
- Uses Teach-Back to determine effectiveness and modifies strategies as needed.
Care Coordination & Delegation
- Plans, coordinates, and prioritizes patient care activities according to skill level and work complexity.
- Maintains safety and continuity of care using methods such as bedside shift report, hand-off tools/processes, inter-disciplinary rounding, etc.
- Demonstrates effective time management skills.
- Delegates appropriately, seeking guidance when needed.
- Demonstrates competent use of technology in the delivery of patient care.
Professional Performance:
Ethics (legal/regulatory), Advocacy & Culturally Congruent Cares
- Identifies ethical situations and seeks assistance, if necessary, to resolve.
- Utilizes available resources when ethical issues arise.
- Delivers culturally sensitive care using resources to meet the needs of patient/family.
- Serves as a patient advocate, seeking guidance when necessary.
Communication & Collaboration
- Supports healthy work environment by demonstrating respectful verbal and non-verbal communication with all members of the healthcare team. Seeks assistance for support with challenging communication.
- Recognizes colleagues when they go above and beyond in demonstrating UTMB’s core values.
- Plans, coordinates, and prioritizes patient care activities in collaboration with inter-professional team.
Leadership
- Recognizes informal and formal unit/hospital leaders and can educate colleagues regarding unit/hospital leadership.
- Recognizes unit, nursing, and institutional strategic initiatives and health system goals.
- Recognizes the importance of financial responsibility to promote fiscal health for the patient, unit and organization.
Education, Evidence-Based Practice & Research
- Attends/participates in unit meetings/activities and supports the philosophy and goals of the unit department and organization.
- Participates in shared leadership at the unit level*.
- Participates in unit based quality improvement activities.
- Attends in-services and continuing education activities.
- Participates in one journal club annually*.
- Completes the UTMB/Vizient™ Nurse Residency Program and completes an evidence based practice project as required*.
- Demonstrates commitment to lifelong learning (evidence-based practice, specialty certification, advanced degree, etc.).
- Demonstrates ability to accept and adopt change by seeking knowledge and needed information.
- Demonstrates knowledge of how to access and utilize evidence-based resources to guide patient care.
Quality, Resources & Safety
- Identifies patient safety concerns and reports appropriately; addresses immediate safety concerns appropriately.
- Identifies unit quality metrics/outcomes data and improvement activities; actively engages in discussion, activities related to unit goals.
- Demonstrates self-care through practices that support personal well-being, personal safety and injury prevention.
General Requirements:
- Completes required specialty specific Competency Based Orientation (CBO) tools by the initial performance evaluation due date for placement in employee file.
- Actively participates in ongoing self-evaluation of competency using Competency Based Orientation (CBO) tools and e-performance nursing appraisal.
- Completes the annual self-evaluation on time for competency and performance evaluation.
- Performs and reports point of care testing (POCT).
- Prioritizes and organizes work so that required assignments are completed within a specified time frame.
- Provides and maintains a clean, safe environment and performs and/or assists others to perform proper aseptic technique, isolation procedures and infection control measures.
- Practices basic cost containment for patients and the unit.
- Consistently completes accurate, concise and legible documentation for all patient, unit and hospital records (including care delivery and telephone patient related interactions).
- Competently utilizes electronic forms of communication and documentation.
- Meets periodic UTMB and unit specific compliance requirements for health screening, training, attendance, safety, and CPR.
- Adheres to internal controls and reporting structure.
SALARY RANGE:
Salary commensurate with experience.
WORK SCHEDULE:
Casual appointment (Up to 19.99 hours/week).
Equal Employment Opportunity
UTMB Health strives to provide equal opportunity employment without regard to race, color, religion, age, national origin, sex, gender, sexual orientation, gender identity/expression, genetic information, disability, veteran status, or any other basis protected by institutional policy or by federal, state or local laws unless such distinction is required by law. As a Federal Contractor, UTMB Health takes affirmative action to hire and advance protected veterans and individuals with disabilities.
Not Specified
DoorDash Shopper - Sign Up and Start Earning
✦ New 🏢 Doordash
Salary not disclosed
Why Become a Shopper with DoorDash?
Turn your shopping skills into extra income. Whether you’re helping someone stock up on groceries or delivering a last-minute convenience order, as a Shopper you unlock more earnings opportunities with DoorDash. Stay active during off-peak hours and no need to wait around for a restaurant preparing an order, becoming a Shopper with DoorDash puts you in control of your time and earnings.
Either as a side hustle or a full-time gig, being a Shopper with DoorDash gives you the opportunity to earn extra cash on your terms.
- Multiple ways to earn: Deliver more than just restaurant orders. Become a Shopper and deliver grocery, convenience, retail, alcohol and more—DoorDash offers diverse earning opportunities so you can maximize your time.
- Control your time: Make cash during off-peak hours so you don’t have to schedule your day around the lunch or dinner time rush; don’t wait around for an order when you do the shopping.
- Know how much you'll make: Clear and concise pay model lets you know the minimum amount you will make before accepting any offer.
- Earn more: Get more cash per delivery on average compared to a restaurant delivery when you do the shopping.*
- Quick and easy start: Sign up in minutes and get on the road fast.*
Basic Requirements
- 18+ years old** (21+ to deliver alcohol)
- Any car, scooter, or bicycle (in select cities)
- Driver's license number
- Social security number (only in the US)
- Consistent access to a smartphone
How to Become a Shopper
- Click “Sign UpApply Now” and complete the sign up process
- Download the DoorDash Dasher app
- Activate your Red Card in the Dasher app***
*Compared to a restaurant delivery order, based on average Dasher payouts nationwide while on a delivery. Actual earnings may differ and depend on factors like number of deliveries completed, time of day, location, and expenses.
*Subject to eligibility.
**Must be 19+ in Arizona, California, Colorado, Delaware, Florida, Georgia, Idaho, Kentucky, Montana, New Jersey, New Mexico, Texas, Utah, and West Virginia
***The Red Card is a prepaid card used by Dashers to pay for items on Dasher Shop & Deliver offers. The card will automatically be funded prior to check out. Red Cards are not linked to Dasher bank accounts or related to earnings. This card is issued by Peoples Trust Company under license from Mastercard International Incorporated. Mastercard is a registered trademark, and the circles design is a trademark of Mastercard International Incorporated.
Additional information
Dashing with DoorDash is a great earnings opportunity for anyone looking for part-time, seasonal, flexible, weekend, after-school, temporary, steady delivery gig. Deliver with DoorDash and earn extra cash while being your own boss. Dash when it works for you. Sign up today.
Not Specified
P
Women Under 40: Earn $35,000–$40,000 as a Surrogate
Salary not disclosed
Do you want to become a surrogate? We are now offering a sign on bonus to all qualified and matched surrogates that sign contracts. The first step is to fill out our surrogate application. A fertility specialist will contact you to continue the process. For intended parents interested in surrogacy to start or grow their families please contact us today. The surrogacy process is complex, but we will be with you every step of the way. Call today to get started.
Women who may have the ability to produce eggs but are unable to use their uterus or do not have a uterus, may consider a surrogate. A donated egg may also be used with the surrogate in the event a woman cannot produce her own eggs or her uterus is not intact or insufficient to carry a pregnancy. In either case, the husband's sperm, if viable, may be used.
Using an egg donor unrelated to the surrogate carrier eliminates any biological tie. The egg of the surrogate is never used as part of the assisted reproduction process, so that a surrogate is never in the position of delivering her own biological child.
The basic requirements of a woman to serve as a surrogate are:
- Emotionally stable
- Responsible
- In good physical health
- Non-smoker
- Has had at least one successful pregnancy
- Is capable of carrying a child to full term
A woman is not required to fall within a particular age range to serve as a surrogate, but most intended parents prefer a surrogate under the age of 40. For more information on surrogacy please see the documents on the left side of this page.
In Texas, there is a judicial process for validating the Gestational Contract (the contract between the intended parents and the surrogate). Included within the various requirements for having a Gestational Contract validated by a Texas court is that the intended parents must be married and the surrogate must have previously carried a child to term. Additionally, there are residency requirements that apply to either the surrogate or the intended parents, but not both.
Compensation for a surrogate services generally starts in the range of $35,000 - $40,000, for base compensation with over all fees up to 70k, in many cases. The amount of compensation is dependent upon a variety of factors, including, but not limited to, whether the surrogate carries twins, what procedures a surrogate is required to undergo and whether the delivery is vaginally or by cesarean section.
Not Specified
Drive with DoorDash - Flexible Onboarding
✦ New 🏢 Doordash
Salary not disclosed
Why Become a Shopper with DoorDash?
Turn your shopping skills into extra income. Whether you’re helping someone stock up on groceries or delivering a last-minute convenience order, as a Shopper you unlock more earnings opportunities with DoorDash. Stay active during off-peak hours and no need to wait around for a restaurant preparing an order, becoming a Shopper with DoorDash puts you in control of your time and earnings.
Either as a side hustle or a full-time gig, being a Shopper with DoorDash gives you the opportunity to earn extra cash on your terms.
Multiple ways to earn: Deliver more than just restaurant orders. Become a Shopper and deliver grocery, convenience, retail, alcohol and more—DoorDash offers diverse earning opportunities so you can maximize your time.
Control your time: Make cash during off-peak hours so you don’t have to schedule your day around the lunch or dinner time rush; don’t wait around for an order when you do the shopping.
Know how much you'll make: Clear and concise pay model lets you know the minimum amount you will make before accepting any offer.
Earn more: Get more cash per delivery on average compared to a restaurant delivery when you do the shopping.*
Quick and easy start: Sign up in minutes and get on the road fast.*
Basic Requirements
18+ years old** (21+ to deliver alcohol)
Any car, scooter, or bicycle (in select cities)
Driver's license number
Social security number (only in the US)
Consistent access to a smartphone
How to Become a Shopper
Click “Sign UpApply Now” and complete the sign up process
Download the DoorDash Dasher app
Activate your Red Card in the Dasher app***
*Compared to a restaurant delivery order, based on average Dasher payouts nationwide while on a delivery. Actual earnings may differ and depend on factors like number of deliveries completed, time of day, location, and expenses.
*Subject to eligibility.
**Must be 19+ in Arizona, California, Colorado, Delaware, Florida, Georgia, Idaho, Kentucky, Montana, New Jersey, New Mexico, Texas, Utah, and West Virginia
***The Red Card is a prepaid card used by Dashers to pay for items on Dasher Shop & Deliver offers. The card will automatically be funded prior to check out. Red Cards are not linked to Dasher bank accounts or related to earnings.
This card is issued by Peoples Trust Company under license from Mastercard International Incorporated. Mastercard is a registered trademark, and the circles design is a trademark of Mastercard International Incorporated.
Additional information
Dashing with DoorDash is a great earnings opportunity for anyone looking for part-time, seasonal, flexible, weekend, after-school, temporary, steady delivery gig. Deliver with DoorDash and earn extra cash while being your own boss. Dash when it works for you. Sign up today.
Remote working/work at home options are available for this role.
Turn your shopping skills into extra income. Whether you’re helping someone stock up on groceries or delivering a last-minute convenience order, as a Shopper you unlock more earnings opportunities with DoorDash. Stay active during off-peak hours and no need to wait around for a restaurant preparing an order, becoming a Shopper with DoorDash puts you in control of your time and earnings.
Either as a side hustle or a full-time gig, being a Shopper with DoorDash gives you the opportunity to earn extra cash on your terms.
Multiple ways to earn: Deliver more than just restaurant orders. Become a Shopper and deliver grocery, convenience, retail, alcohol and more—DoorDash offers diverse earning opportunities so you can maximize your time.
Control your time: Make cash during off-peak hours so you don’t have to schedule your day around the lunch or dinner time rush; don’t wait around for an order when you do the shopping.
Know how much you'll make: Clear and concise pay model lets you know the minimum amount you will make before accepting any offer.
Earn more: Get more cash per delivery on average compared to a restaurant delivery when you do the shopping.*
Quick and easy start: Sign up in minutes and get on the road fast.*
Basic Requirements
18+ years old** (21+ to deliver alcohol)
Any car, scooter, or bicycle (in select cities)
Driver's license number
Social security number (only in the US)
Consistent access to a smartphone
How to Become a Shopper
Click “Sign UpApply Now” and complete the sign up process
Download the DoorDash Dasher app
Activate your Red Card in the Dasher app***
*Compared to a restaurant delivery order, based on average Dasher payouts nationwide while on a delivery. Actual earnings may differ and depend on factors like number of deliveries completed, time of day, location, and expenses.
*Subject to eligibility.
**Must be 19+ in Arizona, California, Colorado, Delaware, Florida, Georgia, Idaho, Kentucky, Montana, New Jersey, New Mexico, Texas, Utah, and West Virginia
***The Red Card is a prepaid card used by Dashers to pay for items on Dasher Shop & Deliver offers. The card will automatically be funded prior to check out. Red Cards are not linked to Dasher bank accounts or related to earnings.
This card is issued by Peoples Trust Company under license from Mastercard International Incorporated. Mastercard is a registered trademark, and the circles design is a trademark of Mastercard International Incorporated.
Additional information
Dashing with DoorDash is a great earnings opportunity for anyone looking for part-time, seasonal, flexible, weekend, after-school, temporary, steady delivery gig. Deliver with DoorDash and earn extra cash while being your own boss. Dash when it works for you. Sign up today.
Remote working/work at home options are available for this role.
Not Specified
Integration/Test Engineering: Remote
✦ New 🏢 Raytheon
$75,800 - 144,200
US-CA-GOLETA-H01 ~ 6380 Hollister Ave ~ BLDG H01 Position Role Type:
Citizen, U.Person, or Immigration Status Requirements:
S. government issued security clearance is required prior to start date. S. citizens are eligible for a security clearance Security Clearance Type:
Secret Security Clearance Status:
Active and existing security clearance required on day 1
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Raytheon is seeking a talented and motivated Senior Systems Integration and Test II Engineer to join our team within the Systems Engineering and Test Capabilities (SETC) Discipline, supporting various Electronic Warfare (EW) and Radar Warning Receiver (RWR) Systems. This role offers a unique opportunity to work across the full lifecycle of the product, from concept to deployment.
Every day will bring new challenges, requiring you to collaborate across disciplines to troubleshoot issues, perform data analysis, and implement solutions. The Systems Integration & Test II Engineer provides comprehensive systems engineering and integration test support by assessing program needs, planning and coordinating test activities, developing schedules, and executing test efforts from project initiation through system transition. The role involves addressing a wide range of technical challenges that require thorough information gathering, detailed analysis, and investigative problem‑solving to identify root causes and determine effective resolutions.
The following responsibilities are expected though not limited to for a Senior Systems Integration & Test II Engineer (EW)
Generate test plans/procedures for assessing Electronic Warfare (EW) system performance
Execute in-house and off-site test activities for system demonstrations and/or system sell-off.
Brief senior program management and engineering leadership.
Test EW hardware and software builds.
Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) discipline (preferably Systems Engineering, Electrical Engineering, Software Engineering or Physics) and a minimum of 2 years of prior relevant experience
S. government issued Secret security clearance is required prior to start date. S. citizens are eligible for a security clearance
Experience writing requirements for EW/Radar system test events
Experience leading system test equipment and special test equipment development activities
Experience troubleshooting, testing, and integrating EW/Radar system test equipment
Experience modeling the performance of EW/Radar systems
Experience with integration of mixed signal modules into the next higher assembly
Experience with security requirements related to government testing
Familiarity with Model-Based Systems Engineering (Cameo Enterprise Architecture), specifically using SysML. Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. Relocation Eligible – relocation assistance available for this position
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Remote working/work at home options are available for this role.
Citizen, U.Person, or Immigration Status Requirements:
S. government issued security clearance is required prior to start date. S. citizens are eligible for a security clearance Security Clearance Type:
Secret Security Clearance Status:
Active and existing security clearance required on day 1
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Raytheon is seeking a talented and motivated Senior Systems Integration and Test II Engineer to join our team within the Systems Engineering and Test Capabilities (SETC) Discipline, supporting various Electronic Warfare (EW) and Radar Warning Receiver (RWR) Systems. This role offers a unique opportunity to work across the full lifecycle of the product, from concept to deployment.
Every day will bring new challenges, requiring you to collaborate across disciplines to troubleshoot issues, perform data analysis, and implement solutions. The Systems Integration & Test II Engineer provides comprehensive systems engineering and integration test support by assessing program needs, planning and coordinating test activities, developing schedules, and executing test efforts from project initiation through system transition. The role involves addressing a wide range of technical challenges that require thorough information gathering, detailed analysis, and investigative problem‑solving to identify root causes and determine effective resolutions.
The following responsibilities are expected though not limited to for a Senior Systems Integration & Test II Engineer (EW)
Generate test plans/procedures for assessing Electronic Warfare (EW) system performance
Execute in-house and off-site test activities for system demonstrations and/or system sell-off.
Brief senior program management and engineering leadership.
Test EW hardware and software builds.
Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) discipline (preferably Systems Engineering, Electrical Engineering, Software Engineering or Physics) and a minimum of 2 years of prior relevant experience
S. government issued Secret security clearance is required prior to start date. S. citizens are eligible for a security clearance
Experience writing requirements for EW/Radar system test events
Experience leading system test equipment and special test equipment development activities
Experience troubleshooting, testing, and integrating EW/Radar system test equipment
Experience modeling the performance of EW/Radar systems
Experience with integration of mixed signal modules into the next higher assembly
Experience with security requirements related to government testing
Familiarity with Model-Based Systems Engineering (Cameo Enterprise Architecture), specifically using SysML. Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. Relocation Eligible – relocation assistance available for this position
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Remote working/work at home options are available for this role.
permanent
Lead Mechanical Systems Engineer - Remote Structures and Integration (AUSTIN)
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Integration Engineer – DCI Pipes, Frames and Structures (REMOTE) (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Senior Mechanical Systems Engineer - Remote Structures and Piping (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Integration Engineer – DCI Pipes, Frames and Structures (REMOTE) (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
jobs by
✓ All jobs loaded