Engineering Structures Impact Factor Jobs in Fox Point Wisconsin
204 positions found
Quad's entry-level manufacturing position includes the opportunity to learn the printing process from the ground up and advance in a progressive environment. In this position you will assist in the creation of various well-known magazines/catalogs/newspaper inserts and other related products in our Press department. Part Time Manufacturing wage is $17.50 / hr.
Shift Availability: 2-3 work week schedule
* Week 1- (2) 12-hour shifts ( 7 a.m. - 7 p.m. or 7 p.m. - 7 a.m .)
* Week 2- (3) 12-hour shifts
Job duties for this position include, but are not limited to:
* Remove product from the end of the printing press or finishing machine.
* Stack loose signatures off a pallet and transfer to table and then place into a collator hopper.
* Transfer completed bundles of product off machine conveyor and stack onto pallets, then place mail bags onto pallet.
* Move product with a hand jack or motorized Raymond or Big Joe lift.
* Comply with all quality, safety and work rules and regulations.
* Effectively communicate with other members of the staff.
* Remove skids of product using a Big Joe and Hand Truck.
* Assist other crew members with various duties including webbing up of the press and/or special handwork in order to meet customer requests.
* Follow all clean-up and housekeeping procedures.
Qualifications:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
* At least 18-years of age or older
* A solid work history
* Ability to work well in a team environment.
* Ability to follow instructions and work independently.
* The ability to read and write; possess good verbal and written comprehension
* Strong interest in manufacturing and a desire to learn.
* The ability to take stacks (average 10-30 lbs.) using repetitive hand/wrist movement, off of the end of a machine (2-4 feet high) and stack product on skids from floor level to 5 feet high using repetitive bending and twisting.
* The ability to remove skids (weighing up to 2400 lbs.) by using a Big Joe and Hand Truck
* Ability to lift stacks of end boards (30 lbs.) as needed.
* Lift rolls of banding strap (60 lb.) as needed.
* Moving logs as needed without lifting them (stand them up or lie them down)
* Ability to adjust stacker using a touch screen.
* Ability to use a vibrating jogging table.
* The ability to take stacks of loose signatures ranging (5-30 lbs.) off a pallet of up to 48" in height and transfer to tabletop work surface 42", and then place into a collator hopper.
* Ability to transfer completed bundles of product (10-30 lbs.) off machine conveyor and stack onto pallets or into mail bags that potentially weigh from 5 to 75 lbs. Then place mail bags onto pallet.
* The ability to use a hand jack or motorized Raymond or Big Joe lift.
* The ability to use a computer, scissors, and tape gun.
* The ability to read and write; possess good verbal and written comprehension.
* 12 hour shifts (7am-7pm or 7pm-7am)
Additional Shift Information
* Must be able to attend 1 week career readiness workshop from 9:30am-1pm
* Must be able to stand for your full 12-hour shift.
Quad is proud to be an equal opportunity employer and values diversity. We are committed to creating a place of belonging — a space where employees do not need to sacrifice who they are to exist and grow in our workplace. Quad does not discriminate on any unlawful basis including race, religion, color, national origin, disability, gender, gender identity, sexual orientation, age, marital status, veteran status, genetic information, or any other basis prohibited by applicable federal, state, or local laws. Quad also prohibits harassment of applicants and employees based on any of these protected categories.
Drug-Free Workplace
Quad's entry-level manufacturing position includes the opportunity to learn the printing process from the ground up and advance in a progressive environment. In this position you will assist in the creation of various well-known magazines/catalogs/newspaper inserts and other related products in our Press department. Part Time Manufacturing wage is $17.50 / hr.
Shift Availability: 2-3 work week schedule
* Week 1- (2) 12-hour shifts ( 7 a.m. - 7 p.m. or 7 p.m. - 7 a.m .)
* Week 2- (3) 12-hour shifts
Job duties for this position include, but are not limited to:
* Remove product from the end of the printing press or finishing machine.
* Stack loose signatures off a pallet and transfer to table and then place into a collator hopper.
* Transfer completed bundles of product off machine conveyor and stack onto pallets, then place mail bags onto pallet.
* Move product with a hand jack or motorized Raymond or Big Joe lift.
* Comply with all quality, safety and work rules and regulations.
* Effectively communicate with other members of the staff.
* Remove skids of product using a Big Joe and Hand Truck.
* Assist other crew members with various duties including webbing up of the press and/or special handwork in order to meet customer requests.
* Follow all clean-up and housekeeping procedures.
Qualifications:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
* At least 18-years of age or older
* A solid work history
* Ability to work well in a team environment.
* Ability to follow instructions and work independently.
* The ability to read and write; possess good verbal and written comprehension
* Strong interest in manufacturing and a desire to learn.
* The ability to take stacks (average 10-30 lbs.) using repetitive hand/wrist movement, off of the end of a machine (2-4 feet high) and stack product on skids from floor level to 5 feet high using repetitive bending and twisting.
* The ability to remove skids (weighing up to 2400 lbs.) by using a Big Joe and Hand Truck
* Ability to lift stacks of end boards (30 lbs.) as needed.
* Lift rolls of banding strap (60 lb.) as needed.
* Moving logs as needed without lifting them (stand them up or lie them down)
* Ability to adjust stacker using a touch screen.
* Ability to use a vibrating jogging table.
* The ability to take stacks of loose signatures ranging (5-30 lbs.) off a pallet of up to 48" in height and transfer to tabletop work surface 42", and then place into a collator hopper.
* Ability to transfer completed bundles of product (10-30 lbs.) off machine conveyor and stack onto pallets or into mail bags that potentially weigh from 5 to 75 lbs. Then place mail bags onto pallet.
* The ability to use a hand jack or motorized Raymond or Big Joe lift.
* The ability to use a computer, scissors, and tape gun.
Additional Shift Information
* Must be able to stand for your full 12-hour shift.
* Successfully complete 1 week Career Readiness Workshop
Quad is proud to be an equal opportunity employer and values diversity. We are committed to creating a place of belonging — a space where employees do not need to sacrifice who they are to exist and grow in our workplace. Quad does not discriminate on any unlawful basis including race, religion, color, national origin, disability, gender, gender identity, sexual orientation, age, marital status, veteran status, genetic information, or any other basis prohibited by applicable federal, state, or local laws. Quad also prohibits harassment of applicants and employees based on any of these protected categories.
Drug-Free Workplace
At Rite-Hite, your work makes an impact. As the global leader in loading dock and door equipment, we design and deliver solutions that keep our customers safe, secure, and productive. Here, you'll find innovation, stability, and the chance to grow your career as part of a team that's always looking ahead.
Are you a mechanical engineer who enjoys solving real-world problems, working hands-on with products, and contributing to designs that improve safety and performance? Join Rite-Hite's engineering team and help evolve our industry-leading vehicle restraint systems - including our flagship Dok-Lok product line.
This role offers a mix of product design, problem solving, and project-based work, with opportunities to contribute across product improvements, cost initiatives, and new development efforts as our roadmap evolves.
What You'll DoDesign and develop mechanical and structural components for vehicle restraint systems and related products
Create and modify 3D models, assemblies, and drawings using SolidWorks (or similar CAD tools)
Support product changes, enhancements, and new development projects across the product lifecycle
Collaborate with product management, manufacturing, supply chain, and testing teams to bring designs from concept through release
Select materials and components with consideration for performance, cost, and manufacturability
Participate in prototype builds, testing, and validation activities to ensure designs meet real-world requirements
Contribute to continuous improvement initiatives, including cost reduction (VAVE) and design optimization
Own small engineering projects or workstreams, helping drive progress from problem definition to solution
Bachelor's degree in Mechanical Engineering or a related field
2-3 years of post-graduation engineering experience in product design, development, or project-based engineering work
Hands-on experience designing metal components and fabricated parts (e.g., machined parts, structural components, weldments, brackets)
Proficiency in 3D CAD (SolidWorks preferred; Creo or similar acceptable)
Experience working on cross-functional engineering projects - beyond routine ECN-only work
Strong problem-solving skills and a practical, detail-oriented engineering mindset
Ability to communicate effectively and collaborate across disciplines
Experience with moving or mechanical systems (e.g., mechanisms, linkages, actuators, rotating components)
Exposure to new product development (NPD), VAVE, or stage-based project workflows
Experience with testing, validation, test plans, or tools such as DFMEA/FMEA
Familiarity with electromechanical systems or working alongside electrical engineers
Work hands-on with physical products in an R&D and test lab environment
Contribute to a mature but evolving product line with a clear roadmap and room for innovation
Be part of a flexible, collaborative engineering team where responsibilities may vary year to year
Gain exposure to a range of engineering work - from product improvements to early concept support - depending on business needs
What We Offer
At Rite-Hite, we take care of our people - because when you're supported, you can do your best work. Our benefits are designed to support your health, your future and your life outside of work:
Health & Well-being: Comprehensive medical, dental, and vision coverage, plus life and disability insurance. A robust well-being program with an opportunity to receive an extra day off and more.
Financial Security: A strong retirement savings program with 401(k), company match, and profit sharing.
Time for You: Paid holidays, vacation time, and personal/sick days each year.
Join us and build a career where you're supported - at work and beyond.
Rite-Hite is proud to be an Equal Opportunity Employer. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic under federal, state, or local law.In accordance with VEVRAA, we are committed to providing equal employment opportunities for protected veterans.We are also committed to maintaining a drug-free workplace for the safety of our employees and customers.
Quad is seeking a Mechanical / Project & Facilities Engineer Intern to support both product development and facility engineering functions at our Sussex, WI location. This internship provides hands-on experience with printing equipment projects while also supporting capital improvements, maintenance, energy efficiency initiatives, and facility operations across the plant.
This role is ideal for an engineering student looking to gain real-world exposure to mechanical design, manufacturing support, and facility infrastructure within a fast-paced industrial environment.
Key Responsibilities
Mechanical Engineering Support
* Assist with product and component design and development for printing equipment
* Utilize 3D CAD software (Creo preferred) to support mechanical designs and documentation
* Perform basic engineering calculations and analysis to support design intent and compliance
* Provide engineering support to manufacturing and field service teams
* Assist with project documentation, change tracking, and engineering records
Project & Facility Engineering Support
* Participate as an active team member in planning, developing, and coordinating engineering activities for capital projects, maintenance, renovations, and energy initiatives
* Assist with preparing cost estimates, project schedules, timelines, and scopes of work
* Support coordination with internal teams and external contractors to ensure safe, compliant execution
* Assist with inspections and troubleshooting of facility systems such as HVAC, power distribution, fire protection, compressed air, vacuum, wastewater, steam/condensate, and utility systems
* Help identify energy and material waste and support continuous improvement efforts
* Apply Lean methodology concepts to assigned tasks and projects
* Travel between Quad facilities when required
We offer excellent benefits to eligible employees, including 401(k), holidays, vacations and more.
Quad is proud to be an equal opportunity employer. We are committed to creating a place of belonging — a space where employees do not need to sacrifice who they are to exist and grow in our workplace. Quad does not discriminate on any unlawful basis including race, religion, color, national origin, disability, gender, gender identity, sexual orientation, age, marital status, veteran status, genetic information, or any other basis prohibited by applicable federal, state, or local laws. Quad also prohibits harassment of applicants and employees based on any of these protected categories.
Drug-Free Workplace
Job Summary
Under the direction of the Lead Automotive Account Manager - West Coast, the SOCAL Automotive Sales Engineer is responsible for maintaining current customer relationships and identifying areas for potential growth with established and new customers in the electric vehicle market. The primary role will be serving as the key account manager for a major electric vehicle company with responsibility for several smaller accounts. The role is responsible for being the main point of contact for communication regarding product selections and opportunity generation. This position is based primarily in the SOCAL area, with travel to the West Coast region as required. This individual will work with a cross-functional team, including sales, project management, product management, and engineering, to achieve success. This will be achieved while maintaining HellermannTyton's Quality and EHS certifications by supporting all corporate policies, procedures, work instructions, and required documentation.
Essential Functions:
- Serve as the key account manager for SOCAL automotive vehicle customers.
- Coordinate and align domestically and globally for relevant opportunities as required.
- Expand HellermannTyton's position in low-voltage, high-voltage vehicle electrification systems as well as fluid routing opportunities.
- Uncover opportunities in standard, platform-based, and custom products
- Attend and lead selected customer-facing meetings to drive opportunities to specify HellermannTyton's products.
- Support overall business direction as set by automotive sales and marketing leadership with vetted information and strategic clarity to ensure key activities are moving forward.
- Work with customer engineering teams to assess standard plastic fasteners/clips for wiring harnesses and fluid routings, offer substitutions, and deliver new, improved offerings.
- Use understanding of technical drawings, documents, and automotive testing requirements to convert information into recommendations and next steps to achieve the specification.
- Understand and have full knowledge of OEM specifications for standard parts and leverage that to gain market share.
- Follow and improve process flows to enable efficient multi-stakeholder direction and understanding of key actions and commitments.
- Manage customers current and upcoming platforms and develop sales plans in line with customers goals
- Maintain familiarity with competitors' products and identify opportunities
- Effectively communicate status, actions, milestones, and activities to key stakeholders.
Other Functions:
- Ability to discern opportunities and roadblocks to the goals of a project and drive results for increased sales.
Qualifications (skills, knowledge, experience)
- BS from an accredited four-year college or university, engineering discipline preferred, or equivalent experience in lieu of degree
- Excellent knowledge of the Microsoft Office Suite.
- 5+ years of professional experience demonstrating mechanical and engineering aptitude, along with successful key customer responsibility
- Automotive Industry Experience required
- Knowledge of plastic fasteners is preferred
- Must have a valid driver's license, acceptable driving record, and adequate insurance
- Minimal travel involved
By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position.
HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.
Job Summary
The Manufacturing Engineer is responsible for driving continuous improvement efforts on the manufacturing floor for HellermannTyton. This role is responsible for analyzing current production processes, identifying areas for improvement, and implementing strategies to enhance efficiency, quality, and safety. The senior engineer will mentor other engineers and work closely with various departments including plant leadership and hourly production personnel.
Essential Functions:
- Effectively lead project teams.
- Understand processing capabilities and tolerances (plastics).
- Analyze work standards to improve labor utilization.
- Ability to analyze complex data sets to drive improvements in process and operations.
- Ability to teach and train Lean and Six Sigma concepts (DMAIC).
- Lead or support new equipment specification, design, installation, commissioning, and qualification activites.
Other Functions
- Conceptualize and develop prototype solutions and designs.
- Define appropriate technical approaches to solve problems and develop solutions.
- Connect projects to P&L Statement.
- Other duties as assigned.
Success in this role will require
- Proficient use of MES and ERP systems.
- Competence of Plastics Manufacturing (materials and molds).
- Ability to mentor young engineers.
- Systems Thinking
- Conflict Management
- Influence Skills
What You'll Bring
- Bachelor's Degree in Engineering
- 8+ years of engineering experience (in manufacturing preferred)
- Injection molding expertise preferred
- Project Management Skills
- Knowledge of the Toyota Production System (Lean Manufacturing)
- Six Sigma (preferred) or Green Belt Certified
- Must have a valid driver's license, with an acceptable driving record, along with adequate insurance
- Strong written and verbal communication skills
#LI-MS1 #LI-Onsite
By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position.
HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.
Job Summary
Under the direction of the Director of Automation, the Automation Continuous Improvement Engineer is responsible for analyzing, developing, supporting, and documenting the ongoing continuous improvement projects within the Automation Engineering department to increase the efficiency, operation and readiness of the plants automation equipment. This will be achieved while maintaining HellermannTyton's Quality and EHS certifications by supporting all corporate policies, procedures, work instructions and required documentation.
The CI Engineer will use Six Sigma tools to analyze and support recommendations for machine improvements and cost saving projects. "
Essential Functions:
- Provide analytical data and documentation to support machine improvements that will lead to improved machine efficiencies.
- Collaborate and review suggested design improvements with Automation Engineer Design Team
- Ensure conformance to engineering codes, IATF16949 and HellermannTyton standards for quality
- Use CAD/SolidWorks software to create/modify and update drawing within the EPDM vault
- Use AB software to create/modify and update machine Programmable Logic Control programs as required.
- Modify and update CAD/SolidWorks files in accordance to standard processes in place in the department.
- Possess advanced skills with vision systems and integration for quality inspections.
- Build and develop strong working relationships with cross-functional teams to work towards common goals and projects outcomes defined by Operations plant management team.
- Participate in project hand off processes that require process optimization, process flow, and assisting with training as required.
- Evaluate high scrap machines/cells using problem solving techniques that could include analysis of material, tooling, process or equipment and prepare data to support recommendations/findings.
- Lead cross-functional teams to successful project completion outcomes, as directed by the Director of Automation and Operations management team.
- Recommend and implement measures to improve equipment performance, quality and production methods.
- Stay current with technology and industry standards
- Comply with all quality and safety regulations in compliance with OSHA and HellermannTyton policy
Other Functions
- Travel could be required on a "as needed" basis
- Attend all meeting with cross-functional teams to review project work and direction
- Lend support through training and technical advice to help other technicians become more efficient.
- All employees entering the manufacturing area and other identified locations must wear the designated Personal Protective Equipment (PPE) as a condition of employment.
Success in this role will require
- Use of SolidWorks/Cad System
- Use of AB Programmable Logic Control software as required
- Six Sigma methodologies and practices
- Project management skills and creating documentation
- Ensure conformance to ASME codes as required
- Follow all IATF16949 and company standards for quality and manufacturability
- Manage and leverage resources to complete projects on time and within budget
- Vision System Integration and control
- Ability to define problems, collect data, establish facts and draw valid conclusions to recommend improvements.
- Ability to effectively present information and respond to questions from groups, managers and fellow team members.
- Experience in communicating with suppliers and vendors
- Basic to advanced skills in pneumatic systems
- Advanced Programmable Logic Control knowledge
What You'll Bring
- Bachelor of Science (B.S.) or equivalent from a four year college or technical school with 3+ years experience in Automation Design/Integration and Continuous Improvement projects involving automation.
- Ability to read and interpret documents such as technical specifications, schematics, and ladder logic
- Certified Six Sigma Green Belt is preferred
- Ability for overnight travel by air or land as needed.
- Must have a valid drivers license, with an acceptable driving record, along with adequate insurance
Rev. 9.21.2021
Title: Tooling Engineer
Reports to: Tooling Manager
Department: Tooling Engineering
Job Summary:
Under the direction of the Tooling Manager, the Tooling Engineer is responsible for assisting the Tooling Engineering Department in directing the manufacture of quality injection molding tools. This will be achieved while maintaining HellermannTyton's Quality and EHS certifications by supporting all corporate policies, procedures, work instructions and required documentation.
Essential Functions:
- Writing purchase orders stating mold building specifications.
- Writing requests for quotations for vendors.
- Assure that vendors keep within budget and timing constraints on projects.
- Evaluate and Approve injection molding tool design.
- Assure that vendors incorporate the approved design in injection molding tool construction.
- Keep a library of tool drawings.
- Travel to vendors to evaluate progress in injection molding tool construction. Travel to vendors to evaluate completed injection molding tool performance and product conformity.
- Evaluate product design as to moldability and simplification for moldability.
- Assist in troubleshooting injection molding problems.
- Work with injection molding tool designs to assure the highest quality molding tools possible.
- Work with toolmakers to assure the highest quality injection molding tools possible.
Other duties assigned:
- Other duties as assigned.
Qualifications:
- High school diploma or equivalent.
- Associate degree or in lieu of degree, three or more years of prior on-the-job experience. A good mechanical ability.
- Prior experience with plastic injection molding process.
- Knowledge of injection molding tools and injection molding tool construction.
- Knowledge of machine tools and how machine tools relate to injection mold tool construction.
- Knowledge of manufacturing best practices.
- Excellent computer skills, including Microsoft software and CAD software.
- Organized; can meet deadlines.
- Ability to work non-standard hours to meet the needs of the customers.
- Ability to travel internationally.
- Must have a valid driver's license with an acceptable driving record, along with adequate automobile insurance.
#LI-KN1 #LI-Hybrid
By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position.
HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.
3rd Shift Production Supervisor - Menomonee Falls, WI | Full-Time | Direct Hire $65,000 – $80,000
About the Role
We are partnering with a well-established machining and assembly facility in the Menomonee Falls area to find their next 3rd Shift Production Supervisor. This is a confidential search for a stable, growing manufacturer serving the automotive and industrial markets.
If you're a hands-on leader who thrives in a fast-paced production environment and takes pride in running a tight, safe, and efficient shift — this one's worth a conversation.
What You'll Be Doing
- Leading and developing a team of ~20 machine operators on 3rd shift (9:30 PM – 6:30 AM)
- Driving production efficiency, safety compliance, and quality performance across your shift
- Tracking key metrics including scrap, efficiency, and safety KPIs
- Coordinating production scheduling and managing manufacturing cell performance
- Partnering with engineering, quality, and maintenance to resolve issues fast
- Coaching employees, conducting performance reviews, and building a strong team culture
What We're Looking For
2–4 years of supervisory experience in a manufacturing environment Track record of managing production teams and hitting performance targets Comfortable with off-shift leadership — able to make decisions independently Strong communicator with both operators and plant leadership Willingness to train on 1st shift for approximately one month before transitioning to 3rd
Bonus Points For:
- Background in machining or metal manufacturing
- Lean manufacturing experience
- Prior experience as a machine operator
Compensation & Benefits
- $65,000–$80,000 base (up to $85,000 for the right candidate)
- 401(k) with company match
- Health, dental & vision insurance
- Paid holidays & vacation
- Company-paid life insurance & disability coverage
The Project Surveyor will provide technical leadership, mentor staff, and collaborate closely with engineers, clients, and public agencies.
This role is responsible for overseeing survey operations from fieldwork through final deliverables, ensuring accuracy, compliance with regulations, and high-quality service to clients.
What we Offer Competitive salary and benefits package Opportunities for professional growth and advancement Collaborative team environment with experienced professional Exposure to impactful transportation infrastructure projects
