Engineering Structures Impact Factor Jobs in Enid Ok Remote
885 positions found — Page 7
A MISSION WORTHY OF A CAREER! If you're looking for "just a job," then stop reading right now.
But, if you're looking for a long-term federal law enforcement career, one that makes a difference every day to our country and its citizens, then the U.S.
Border Patrol (USBP) would like you to take the first step to becoming an entry level Border Patrol Agent.
USBP is hiring immediately to fill full-time, entry-level, career positions in federal law enforcement where your prior experience in public safety, security, military police or law enforcement may qualify.
Train and work with an elite team of professionals whose camaraderie, pride, and sense of purpose are hallmarks of their daily mission of protecting America.
Now is the time to make your move because, along with excellent base pay, exceptional benefits, and job stability, USBP is offering up to $60,000 in additional incentives (see details below) .
Salary and Benefits Annual base salary for newly appointed BPAs varies per grade, as follows: GL-5/GL-7 $51,632
- $92,219 per year.
Border Patrol Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional ROTH 401(k) offering.
*Recruitment Incentive
* Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102 ) will be eligible for up to $20,000 in incentives.
The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location such as Sierra Blanca, Presidio, Sanderson, Comstock, Freer or Hebbronville, TX; Lordsburg, NM; or Ajo, AZ.
*Retention Incentive
* Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.
Duty Locations IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations.
U.S.
Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates' first-choice preferences.
Relocation may be required.
Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others.
A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014.
This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12.
You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level.
Duty Locations: You will be asked to select your preferred location for one of the following mission critical locations: Big Bend Sector Stations
-
*Presidio, Van Horn,
*Sanderson, Alpine,
*Sierra Blanca, Marfa Buffalo Sector Stations
- Wellesley Island Del Rio Sector Stations
- Del Rio, Brackettville,
*Comstock, Eagle Pass North, Eagle Pass South, Carrizo Springs, Uvalde El Paso Sector Stations
- Alamogordo, Clint, Deming, El Paso, Fort Hancock, Las Cruces,
*Lordsburg, Santa Teresa, Ysleta El Centro Sector Stations
- El Centro, Indio, Calexico Grand Forks Sector Stations
- Pembina Havre Sector Stations
- Havre, Malta, Plentywood, Scobey, Sweetgrass Houlton Sector Stations
- Calais, Fort Fairfield, Jackman, Rangeley, Van Buren Laredo Sector Stations
- Laredo South, Cotulla,
*Hebbronville, Laredo West,
*Freer, Laredo North, Zapata Rio Grande Valley Sector Stations
- Rio Grande City, Fort Brown, McAllen, Brownsville, Falfurrias, Weslaco, Kingsville, Harlingen San Diego Sector Stations
- Boulevard, Brownfield, Campo, Chula Vista, Imperial Beach, Murrieta, San Clemente Spokane Sector Stations
- Colville, Curlew, Metaline Falls, Oroville Swanton Sector Stations
- Beecher Falls, Burke, Champlain, Newport, Richford Tucson Sector Stations
-
*Ajo, Tucson, Nogales, Douglas, Brian A Terry, Sonoita, Casa Grande, Three Points Substation, Willcox Yuma Sector Stations
- Blythe, Yuma, Wellton Duties and Responsibilities As a BPA, you will be part of our 60,000 workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity.
Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.
Typical assignments include: Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband Performing farm checks, building checks, traffic checks, city patrols, and transportation checks Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.
Qualifications You qualify for the GL-5 grade level if you possess one of the following: Experience: One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records; OR Education Substitution: A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR Combination of Experience and Education: A combination of general work experience AND successfully completed college education.
This will be calculated using your resume and official or unofficial transcripts submitted with your application.
You qualify for the GL-7 grade level if you possess one of the following: Experience: One year of specialized work experience that shows you have the skills necessary to: Make sound judgments and decisions in the use of firearms.
Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters.
Analyze information rapidly and make prompt decisions where you will be expected to make arrests after the completion of required training and apply these skills in a law enforcement capacity such as criminal code enforcement, determining violations of laws, correctional or rehabilitation work involving criminal offenders, security, military, etc.
The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants.
Education Substitution for the GL-7 grade level: A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership.
Or will receive a bachelor's degree with Superior Academic Achievement.
Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR A Combination of Experience and Education: This will be calculated using your resume and official or unofficial transcripts submitted with your application.
Note: If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level.
Please refer to the BPA GL-9
- 11 announcement.
Other Requirements Citizenship : You must be a U.S.
Citizen to apply for this position.
Residency : You must have had primary U.S.
residency (includes protectorates as declared under international law) for at least three of the last five years.
Age Restriction : In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions.
Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03.
The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C.
8336(c) or Title 5 U.S.C.
8412(d).
Veterans' Preference : You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA).
The age restriction does not apply if you are Veterans' Preference eligible.
Formal Training : After you are hired, you will be detailed to the U.S.
Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement and USBP-specific operations, driver training, physical techniques, firearms, and other courses.
Border Patrol work requires the ability to speak and read Spanish, as well as English.
Border Patrol Agents will be provided training to become proficient with the Spanish language at the Academy.
How to Apply: Click the Apply button on this site.
You will be linked to the CBP Talent Network registration page.
For Position of Interest, select Border Patrol Agent, then complete the pre-screening questions.
You'll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application.
Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit.
You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam .
If you have questions about the application process, contact a recruiter through the U.S.
Border Patrol page: /s/usbp .
As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.
Drive Growth.
Get Rewarded.
This Jobot Job is hosted by: Parker Huguley Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $90,000
- $100,000 per year A bit about us: We are a fast-growing, therapist-led outpatient rehabilitation organization with clinics across multiple states.
Our model is built on clinical excellence, autonomy, and community impact.
Our team believes in empowering clinicians to practice at the top of their license while providing strong leadership support, operational infrastructure, and career growth pathways.
We combine private-practice culture with the stability and resources of a larger organization — allowing you to focus on patient care, professional development, and long-term career success.
Why join us? Why Join Us: Up to $35,000 annual bonus potential Leadership opportunity with real influence over clinic growth Therapist-led organization — clinical autonomy respected Strong referral networks and steady patient volume Full administrative support (front desk, billing, scheduling) Generous CEU allowance + professional development support Medical, dental, vision insurance 401(k) with company match PTO + Paid Holidays Career advancement pathways into regional or executive leadership Job Details Responsibilities: Evaluate and treat patients in an outpatient orthopedic setting Develop and implement individualized treatment plans Assist with clinic performance metrics and growth initiatives Maintain compliance with documentation and regulatory standards Foster a positive, collaborative team environment Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Physician Assistant position with INTEGRIS Health Medical Group's General Surgery Clinic with typical hours of Monday through Friday, 8am to 5pm. Enjoy working with the team and truly impact patient accessibility.
The Physician Assistant provides medical consultation, routine patient care, and follow up as directed. The Physician Assistant assists physician with procedures and serves as a liaison between the physician and the patient. Adheres to National Patient Safety Goals as appropriate based on the level of patient contact this position requires.
Questions?
INTEGRIS Health is an Equal Opportunity/Affirmative Action Employer
The Physician Assistant responsibilities include, but are not limited to, the following:
- Initiates and completes a detailed patient assessment.
- Diagnoses the actual or potential health problem or need, based upon an analysis of the data collected, and plans therapeutic intervention.
- Orders and initiates appropriate laboratory tests, medication, treatment, and consultation based upon an analysis of the data collected.
- Orders or performs routine procedures such as injections, immunizations, suturing (not involving tendons, arteries or nerves) wound care, venous and arterial blood draws, and managing simple conditions produced by infection, trauma or other disease processes.
- Educates the patient regarding prescribed treatment and medications.
- Maintains timely documentation of the patients medical record.
ISMC Neurosurgical Only:
- Ensures all necessary patient tests (i.e. pre op labs, EKGs, x rays, etc.) have been completed in prior to surgery.
- Assists physician(s) in surgery (i.e. wound closure, fitting of braces, post op orders, etc.).
- Provides wound care and infection management.
- Makes rounds as requested by physician(s); completes patient discharge summaries as requested.
ER Only:
- Assists in triage and initiates radiographic and laboratory studies for patients to be seen in the main Emergency Department or Minor Care.
- May examine, treat, and make disposition on patients in triage under the direct physician supervision as time allows
Mental Health Only:
- Responsible for patient assessment following therapeutic holds per state and federal regulations.
Reports to the supervising physician and department management.
This position may have additional or varied physical demand and/or respiratory fit test requirements. Please consult the Physical Demands Project SharePoint site or contact Risk Management/Employee Health for additional information. Potential for exposure to infections and communicable diseases, blood and body fluids, electrical equipment, chemicals. Must follow standard precautions. All applicants will receive consideration regardless of membership in any protected status as defined by applicable state or federal law, including protected veteran or disability status.
- Requires a degree from an accredited Physician Assistant program.
- Current licensure as a Physician Assistant in the state of Oklahoma.
- Requires current BLS certification.
- Must be able to communicate effectively in English
ISMC Neurosurgical Dept Only:
- 1 year of experience in surgery setting preferred
Emergency Department Only:
- 1 year of experience in a comprehensive emergency department setting preferred
NZTI only:
- Current ACLS certification if working with adults required in acute care environments.
- Current PALS certification if working with children required in acute care environments.
Border Patrol Agent (BPA) – in the Federal Security and Public Safety Sector (Entry Level)
A MISSION WORTHY OF A CAREER!
If you’re looking for “just a job,” then stop reading right now. But, if you’re looking for a long-term federal law enforcement career, one that makes a difference every day to our country and its citizens, then the U.S. Border Patrol (USBP) would like you to take the first step to becoming an entry level Border Patrol Agent.
USBP is hiring immediately to
fill full-time, entry-level, career
positions in federal law enforcement where your prior experience in public safety, security, military police or law enforcement may qualify. Train and work with an elite team of professionals whose camaraderie, pride, and sense of purpose are hallmarks of their daily mission of protecting America.
Now is the time to make your move because, along with excellent base pay, exceptional benefits, and job stability,
USBP is offering up to $60,000 in additional incentives (see details below).
Salary and Benefits
Annual base salary for newly appointed BPAs varies per grade, as follows: GL-5/GL-7 $51,632 - $92,219 per year. Border Patrol Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional ROTH 401(k) offering.
*Recruitment Incentive*
Newly appointed Border Patrol Agents (as defined in
5 CFR 575.102)
will be eligible for up to $20,000 in incentives. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location such as Sierra Blanca, Presidio, Sanderson, Comstock, Freer or Hebbronville, TX; Lordsburg, NM; or Ajo, AZ.
*Retention Incentive*
Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.
Duty Locations
IMPORTANT NOTICED: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations.
U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates’ first-choice preferences.
RELOCATION MAY BE REQUIRED.
Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level.
Duty Locations: You will be asked to select your preferred location for one of the following mission critical locations:>
Big Bend Sector Stations - *Presidio, Van Horn, *Sanderson, Alpine, *Sierra Blanca, Marfa
Buffalo Sector Stations - Wellesley Island
Del Rio Sector Stations - Del Rio, Brackettville, *Comstock, Eagle Pass North, Eagle Pass South, Carrizo Springs, Uvalde
El Paso Sector Stations - Alamogordo, Clint, Deming, El Paso, Fort Hancock, Las Cruces, *Lordsburg, Santa Teresa, Ysleta
El Centro Sector Stations - El Centro, Indio, Calexico
Grand Forks Sector Stations - Pembina
Havre Sector Stations - Havre, Malta, Plentywood, Scobey, Sweetgrass
Houlton Sector Stations - Calais, Fort Fairfield, Jackman, Rangeley, Van Buren
Laredo Sector Stations - Laredo South, Cotulla, *Hebbronville, Laredo West, *Freer, Laredo North, Zapata
Rio Grande Valley Sector Stations - Rio Grande City, Fort Brown, McAllen, Brownsville, Falfurrias, Weslaco, Kingsville, Harlingen
San Diego Sector Stations - Boulevard, Brownfield, Campo, Chula Vista, Imperial Beach, Murrieta, San Clemente
Spokane Sector Stations - Colville, Curlew, Metaline Falls, Oroville
Swanton Sector Stations - Beecher Falls, Burke, Champlain, Newport, Richford
Tucson Sector Stations - *Ajo, Tucson, Nogales, Douglas, Brian A Terry, Sonoita, Casa Grande, Three Points Substation, Willcox
Yuma Sector Stations - Blythe, Yuma, Wellton
Duties and Responsibilities
As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation’s economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.
Typical assignments include:
Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations
Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations
Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband
Performing farm checks, building checks, traffic checks, city patrols, and transportation checks
Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.
Qualifications
You qualify for the GL-5 grade level if you possess one of the following:
Experience:
One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records; OR
Education Substitution:
A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university;
OR
Combination of Experience and Education:
A combination of general work experience AND successfully completed college education. This will be calculated using your resume and official or unofficial transcripts submitted with your application.
You qualify for the GL-7 grade level if you possess one of the following:
Experience:
One year of specialized work experience that shows you have the skills necessary to:
Make sound judgments and decisions in the use of firearms.
Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters.
Analyze information rapidly and make prompt decisions where you will be expected to make arrests after the completion of required training and apply these skills in a law enforcement capacity such as criminal code enforcement, determining violations of laws, correctional or rehabilitation work involving criminal offenders, security, military, etc.
The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants.
Education Substitution for the GL-7 grade level:
A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership. Or will receive a bachelor's degree with Superior Academic Achievement. Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR
A Combination of Experience and Education:
This will be calculated using your resume and official or unofficial transcripts submitted with your application.
Note:
If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level. Please refer to the BPA GL-9 - 11 announcement.
Other Requirements
Citizenship:
You must be a U.S. Citizen to apply for this position.
Residency:
You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.
Age Restriction:
In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).
Veterans’ Preference:
You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible.
Formal Training:
After you are hired, you will be detailed to the U.S. Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement and USBP-specific operations, driver training, physical techniques, firearms, and other courses. Border Patrol work requires the ability to speak and read Spanish, as well as English. Border Patrol Agents will be provided training to become proficient with the Spanish language at the Academy.
How to Apply:
Click the Apply button
on this site. You will be linked to the CBP Talent Network registration page. For Position of Interest, select Border Patrol Agent, then complete the pre-screening questions.
You’ll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government’s official employment site, to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam.
If you have questions about the application process,
contact a recruiter
through the U.S. Border Patrol page:
/s/usbp.
As a subscriber to the CBP Talent Network, you’ll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.