Engineering Structures Impact Factor Jobs Full Time Jobs in Ewing, NJ

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Minimum of an Associates of Applied Sciences Degree in related field of medical electronics, electronic technology or equivalent military or related training required.  CBET certification preferred.

Three to five years experience or equivalent, performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Job Title: MRI Technologist

Employment Type: Full-time

Shift: Evening Shift (3:00 pm - 11:30 pm) / Weekend and holiday requirements
Location: St. Mary Medical Center - Langhorne, PA

We are offering a $15,000 hiring bonus to external candidates who meet our minimum requirements!

Position Purpose

This role performs MRI examinations on patients utilizing specialized x-ray and computer systems. The purpose is delivery of quality care commensurate with the age of the patient population for the said designated area.

As a MRI Technologist, you will:

• Knows, understands, incorporates, and demonstrates the Trinity Health Mission, Vision, and Values in behaviors, practices, and decisions.

• Participates constructively in PI activities in the department

• Recognizes special needs/concerns of populations served and adjusts communication accordingly, i.e., language barrier, diminished hearing, concrete terms, etc.

• Performs MRI examinations on patients, using  equipment correctly and according to manufacturer specifications.

• Uses MRI scanners appropriately, has a good knowledge of cross sectional anatomy in all scan planes.

• Understands and can accurately use PACS and Teleradiology systems

Minimum ​Requirements:

• Successful graduate from an AMA approved Radiology program required.

• Registered by ARRT; MRI Certification required.

• BLS required

Position Highlights and Benefits:

• Comprehensive benefit packages, including medical, dental, vision, mental health, paid time off, 403B, education assistance and voluntary benefits (pet insurance, accident insurance, hospital indemnity and others) available from the first day of employment.  

• Work/Life balance with flexible schedules.  

• Free onsite parking.  

• Our mission and core values are what drive each member of Trinity Health to support each other, communicate openly and respectfully while embracing a culture that nurtures a healing, safe environment for all.   

• Referral Rewards Program 

About us:

St. Mary Medical Center is a beautiful 53-acre state-of-the-art facility comprised of more than 700 physicians, nearly 3,000 colleagues, and 1,100 volunteers committed to providing quality care delivered with compassion and respect.  St. Mary attracts top doctors, introduces cutting-edge technologies and implements advanced procedures to meet the healthcare needs of the people it serves, including the nearly 630,000 residents of Bucks County.  

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

.

OR Interventional Technician

Must have strong critical thinking skills, work well under pressure with high acuity situations.  Prepares, operates, and maintains X-Ray equipment.  Position requires on-call responsibility.  Technologist’s primary role will be in neuro-endovascular with complimentary role in cardiovascular interventions.  Is the subject matter expert/clinical resource for these cases.

• be able to operate and troubleshoot equipment used in the Interventional OR

• To be able to maintain and access X-ray equipment for routine maintenance and service needs

• Able to interpret and assist physician with pertinent patient and procedural information

• Compile test results utilizing hospital policy and procedures Insures proper identification of patient

• Prep patient for procedures while maintaining patient privacy

• Produces quality diagnostic images for interpretation: Positioning / Technique Responds effectively in an emergency situation

• Able to communicate any observed changes in patient condition to physician

• Acts as a patient advocate and upholds patient rights Prioritizes/organizes work assignments and adjusts priorities based on changing situations

• Consults and communicates with other departments in a professional manner

• Demonstrates understanding of safety, health and morale needs of customers/co-workers by taking steps to ensure those needs are met

• Functions as a scrub assist to physicians during interventional procedures

• Prepares patient for procedures providing instructions to obtain desired results, gain cooperation and minimize anxiety

• Operates medical imaging equipment properly and safely

• Demonstrates awareness of Radiation Safety procedures

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

.

OR Interventional Technician

Must have strong critical thinking skills, work well under pressure with high acuity situations.  Prepares, operates, and maintains X-Ray equipment.  Position requires on-call responsibility.  Technologist’s primary role will be in neuro-endovascular with complimentary role in cardiovascular interventions.  Is the subject matter expert/clinical resource for these cases.

• be able to operate and troubleshoot equipment used in the Interventional OR

• To be able to maintain and access X-ray equipment for routine maintenance and service needs

• Able to interpret and assist physician with pertinent patient and procedural information

• Compile test results utilizing hospital policy and procedures Insures proper identification of patient

• Prep patient for procedures while maintaining patient privacy

• Produces quality diagnostic images for interpretation: Positioning / Technique Responds effectively in an emergency situation

• Able to communicate any observed changes in patient condition to physician

• Acts as a patient advocate and upholds patient rights Prioritizes/organizes work assignments and adjusts priorities based on changing situations

• Consults and communicates with other departments in a professional manner

• Demonstrates understanding of safety, health and morale needs of customers/co-workers by taking steps to ensure those needs are met

• Functions as a scrub assist to physicians during interventional procedures

• Prepares patient for procedures providing instructions to obtain desired results, gain cooperation and minimize anxiety

• Operates medical imaging equipment properly and safely

• Demonstrates awareness of Radiation Safety procedures

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Job Type: Full-time

Available Positions: 1

Location: On-Site

Application Deadline: March 30th, 2026

Opening Type: Existing Vacancy

Summary

The Structural Designer will support our production teams by developing precise drawings, layouts, and 3D models for custom products and packaging. This role plays a key part in turning concepts, measurements, and customer requests into designs, prototypes, and real solutions used on the production floor.

Key Activities

• Create and update 2D/3D CAD drawings, layouts, and technical specifications.
• Translate ideas, measurements, and customer requirements into accurate, sustainable designs.
• Assist with prototypes, project cost estimates, and test builds for new products.
• Work with production teams to ensure designs are feasible, efficient, and optimized for manufacturing.
• Maintain drawing files, revision histories, and documentation.
• Support R&D, cost-saving initiatives, and continuous improvement projects.
• Participate in design reviews and collaborate with sales, operations, and quality as needed.

Preferred Skills

• Strong aptitude for numbers and precise measurements.
• Prior packaging or manufacturing experience is preferred.

Educations & Experience

• 1-3 years of experience in packaging or structural design within a manufacturing, corrugated, consumer goods, or packaging industry.
• Experience designing corrugated packaging, folding cartons, displays, or protective packaging.

Are you looking for your next opportunity? We can help.

Finding a great opportunity that fosters growth, a great culture, and leadership opportunities can be difficult. Top Quality Recruitment (TQR) connects professionals with leadership opportunities across the Packaging, Food and Beverage, Medical Devices, and Biotechnology industries. With 50+ years of experience, we believe in one-to-one communication and finding the best candidate/employer match possible.

TQR is an equal-opportunity employer that encourages diversity. We will consider all applications.

Accommodation for applicants with disabilities is available upon request.

Are you looking to hire? Get started here:

See hiring advice:

See all available opportunities:

We thank all applicants for their interest and appreciate the time and effort involved; however, due to the large volume of resumes received only those candidates selected for an interview will be contacted. Please attached your resume to your application.

Job ID: 8198

Job Title: Radiology Technologist

Employment Type: Part-time, 24 hours/week

Shift: Monday - Friday (8:00 am - 1:00 pm) / Every 6th weekend (Sat and Sunday 8:00 am - 4:30 pm)

Location: St. Mary Medical Center - Langhorne, PA

Position Purpose
Involves technical work in the operation of diagnostic radiographs and fluoroscopic equipment. The purpose is delivery of quality care commensurate with the age of the patient population for the designated area.

Minimum Qualifications:                                                                                              

• HS/equivalent graduate required

• Successful graduate from an AMA approved Radiology program required

• Registered by ARRT or acquired within 180days

• BLS required

Position Highlights:

• Work/Life balance with flexible schedules. 

• Retirement Savings Program 

• Free onsite parking.  

• Our mission and core values are what drive each member of Trinity Health to support each other, communicate openly and respectfully while embracing a culture that nurtures a healing, safe environment for all.   

• Referral Rewards Program 

About us:

St. Mary Medical Center is a beautiful 53-acre state-of-the-art facility comprised of more than 700 physicians, nearly 3,000 colleagues, and 1,100 volunteers committed to providing quality care delivered with compassion and respect.  St. Mary attracts top doctors, introduces cutting-edge technologies and implements advanced procedures to meet the healthcare needs of the people it serves, including the nearly 630,000 residents of Bucks County. 

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Join a mission-driven environmental and engineering consulting firm that has been delivering innovative water resources and ecological restoration solutions. This Geotechnical Engineer / Technical Project Manager (PE Required) opportunity is based in Trenton or Sicklerville, NJ and offers the chance to work on meaningful projects such as stormwater management systems, dam removals, wetland restoration, coastal protection, and floodplain reconnections. If you’re passionate about sustainable infrastructure and want to collaborate with a team that values environmental stewardship, creativity, and a positive work culture, this is an exciting place to grow your career.

Qualifications and responsibilities for this Geotechnical Engineer / Technical Project Manager position include:

• Bachelor’s degree in Civil Engineering – Plan and execute subsurface investigations for land and water-based projects
• Professional Engineer (PE) license required – Perform geotechnical analyses including slope stability, seepage, bearing capacity, settlement, and liquefaction
• 6+ years of geotechnical engineering experience – Lead and manage geotechnical aspects of ecological restoration and water resources projects
• Experience with foundation and earth structure design – Analyze axial and lateral capacities of deep foundations and sheet pile systems
• Proficiency in AutoCAD and Civil 3D – Prepare geotechnical reports, drawings, and technical plans
• Strong written and verbal communication skills – Prepare proposals, technical reports, and present findings to clients and stakeholders
• Project management and time management skills – Oversee multiple projects including scheduling, coordination, and client interaction
• Leadership and mentoring ability – Train junior staff and provide geotechnical guidance across multiple practice areas

Salary: $95,000 - $125,000 per year, commensurate with experience.

Benefits: This full-time, permanent, direct-hire position offers great benefits including medical, dental, and vision insurance; a 401(k) plan with a 5% company match after three months and immediate vesting; paid vacation and personal time off; paid parental leave; and a hybrid work schedule with flexible core hours.

DAVRON is the leading Headhunter and Executive Search firm for Engineering, Architecture, Construction and Manufacturing professionals nationwide. Our recruiters have direct communication with hiring managers allowing us to get you in front of company decision makers. You also receive one-on-one interview preparation and insider coaching from staffing experts to help you every step of the way. We want to see you thrive in challenging work environments that bring you excitement and prosperity in your career!

Apply Now!

Are you ready to take the next step in your career and thrive in a challenging work environment? If so, apply today and let's see where this opportunity can take you!

GEOTECHNICAL ENGINEER | TECHNICAL PROJECT MANAGER | PROFESSIONAL ENGINEER (PE) | AUTOCAD | CIVIL 3D | GEOTECHNICAL ANALYSIS | DAM & LEVEE DESIGN | STORMWATER MANAGEMENT | WETLAND RESTORATION | FOUNDATION DESIGN | HYDROLOGIC & HYDRAULIC ANALYSIS | CONSTRUCTION OVERSIGHT

Company Description

Sojo Industries ("Sojo") is an industrial automation company that utilizes robotics, mobility, and modularity to deliver efficient packaging and assembly solutions to the food and beverage industry.

Sojo has built and designed a sophisticated SQF-compliant facility in Pennsylvania ("Sojo Sprint") across its eight automated lines to support a variety of packaging materials such as registered shrink, top loaded boxes, and side loaded cartons to name a few. In addition, Sojo utilizes its proprietary mobile manufacturing offering, "Sojo Flight", to eliminate freight costs, labor costs, packaging costs and harmful emissions while delivering on-site packaging services.

The Sojo team is comprised of seasoned executives and operators from the food and beverage industry and customers include several Fortune 500 brands, distributors, and manufacturers.

Job Role

The Production Manager will report directly to the Regional Plant Director. They will be responsible for managing operations at customer facilities. This position will oversee the training, production, and performance of the assigned Flight operation.

Responsibilities

• Daily production measured by output per day and machine uptime
• Daily scheduling of production based on weekly capacity plan
• Daily management of forklift operations to support production activity
• Daily management of ERP and WMS system related to line production
• Setup of new locations based on engineering and design parameters following FAT
• Management of team performance based on metrics and KPIs across multiple locations
• Maintain and track daily labor hours by line associate to support invoice reconciliation
• Support and coordination with capacity planning and scheduling functions
• Maintain and follow all local site safety and quality related functions
• Training of production team in areas of production lines, robotics, and quality control
• (Oversight) Ordering all warehouse supplies (PPE, glue, shrink wrap, etc.)
• Management of spare parts and supplies
• Engage with Sojo Maintenance on routine and ad-hoc maintenance and repair

Job Type: Full-time

Salary: $85,000.00 - $100,000.00 per year

Benefits:

• Dental insurance
• Health insurance
• Paid time off
• Vision insurance

Schedule:

• 10 hour shift
• Day shift
• Monday to Friday
• On call
• Weekends as needed
• Availability to rotate 1st, 2nd, and 3rd shift

Supplemental pay types:

• Bonus opportunities

Experience:

• Production management: 4 years (Required)
• Management: 4 years (Required)

Company Description

JDC Energy Services, LLC (JDC), an affiliate of DCO Energy, LLC, and Joseph Jingoli and Son, Inc., is a leading energy engineering, procurement, and construction (EPC) firm. JDC specializes in self-funding energy efficiency projects for public and private clients through energy savings and comprehensive incentive programs. With expertise in demand-side energy management, supply-side optimization, and construction management, JDC provides cost-effective, energy-efficient upgrades to HVAC and lighting systems. Serving a diverse range of clients, JDC works with commercial, public, K-12, healthcare, higher education, manufacturing, gaming, industrial, and pharmaceutical entities to deliver measurable value and operational savings.

Role Description

This is a full-time hybrid role for an Energy Engineer II based between our Melville, New York and Lawrenceville, New Jersey offices with flexibility to work from home one day per week.

The Energy Engineer plays a key role in developing innovative energy conservation measures and demand‑side management strategies for buildings and facilities. Working closely with facility managers, this role conducts detailed energy assessments, performs on‑site investigations, and evaluates the performance of building systems.

The Energy Engineer prepares energy‑savings calculations, drafts clear and technically sound reports, and interprets engineering documents to support project planning and execution. They also monitor and support construction activities related to energy systems and equipment to ensure alignment with project specifications and industry standards.

In addition, the Energy Engineer provides technical expertise throughout project design and implementation to optimize system performance and achieve measurable energy and cost savings. The role also supports the Business Development team by evaluating potential opportunities and contributing technical insights during early‑stage project development

Responsibilities

• Performs technical energy audits and ECM payback calculations; drafts technical reports on findings.
• Provides engineering and technical support for project development and implementation and coordinates with facility personnel to optimize the operations and energy use of energy systems and equipment.
• Analyzes systems and equipment to determine optimum operating conditions and diagnose issues impacting energy consumption; develops and recommends strategies to maximize operating efficiency.
• Reviews data from Energy Management and Information Systems (EMIS), such as a building automation system, and utility billing and meter data to identify opportunities for energy and operational savings.
• Works with facility managers to implement effective and innovative energy conservation measures (ECMs) and demand-side management strategies in buildings and facilities.
• Researches, tests, and summarizes benefits of energy efficiency and renewable energy project concepts.
• Develops and delivers training on heating, ventilation, and air-conditioning (HVAC) controls and energy management for appropriate stakeholders.
• Advises on equipment specifications, conducts bidding process with equipment suppliers for upgrades and energy retrofits, and supports annual energy budget preparation.
• Reviews, monitors, and manages construction activities related to energy systems and equipment.
• Provides energy database support, including tracking and reporting of ECM and providing facility operational and use characteristics.
• Updates job knowledge by participating in educational opportunities, reading professional publications, maintaining professional networks, and participating in professional organizations.

Skills and Experience

• Knowledge of engineering practices and principles and experience in one or more of the following engineering fields: mechanical, environmental, civil, and electrical.
• Experience with building systems and equipment, including implementing energy efficiency measures and optimizing equipment use and scheduling to maximize energy and cost savings.
• Experience making routine determinations related to engineering principles and standards and offering recommendations for nonroutine matters.
• Experience interpreting engineering documents, evaluating construction plans, and using data from EMIS to monitor and control mechanical systems.
• Ability to perform technical analysis.
• Ability to verbally communicate technical and nontechnical information to various stakeholders.
• Familiarity with ASHRAE standards.
• Ability to manage time independently and meet schedules and deadlines.
• Ability to identify high-impact energy conservation measures and manager energy efficiency projects.

• Bachelor's degree in an applicable energy or engineering field, or other relevant degree from an accredited institution.

Engineer II – Mid Level (2–5 years)

• Demonstrated experience independently executing major portions of energy projects, including leading site assessments, performing energy and cost‑savings calculations, and managing technical deliverables. Capable of coordinating with facility staff, overseeing implementation tasks, and contributing to project planning and design.

Engineer III – Senior Level (5+ years)

• Extensive experience leading full‑cycle energy projects, from opportunity development through implementation and verification. Proven ability to manage client relationships, oversee multidisciplinary teams, develop advanced energy strategies, and ensure successful delivery of complex ECMs and system upgrades.