Engineering Structures Impact Factor 2024 Jobs in Minnesota

• 
  
• Be responsible for quality product standards with no defects.
  
• Meet customer deadlines and expectations.
  
• Be responsible to comply with applicable elements of quality systems.
  
• Participate in cost reduction plans and continuous improvement plans/events, as required.
  
• Participate in audits.
  
• Acquire applicable skill/knowledge/certifications as required.
  
• Perform inspection of parts, does coating, labeling/boxing, and general preparation for shipment.
  
• Check parts for cracks, loose connections, faulty bonds, and faulty assembly.
  
• Record test results in testing log. Route products for rework or salvage of usable parts.
  
• Route reworked assemblies for testing. Clean completed assemblies. Assemble parts according to blueprint specifications.
  
• Test parts by connecting to test equipment setting controls, observing readings and actions of instrument checking for malfunctions.
  
• Set up and use equipment such as: Ragen Assembly, Component Lead Former, Drill Press, Denison Hydraulic Press, Component Lead tinning, and S.M.T. Re-flow.
  
• May fabricate instrument parts through crimping, staking, and cutting.
  
• Acquire applicable skill/knowledge/certifications as required.
  
• Once properly trained and/or certified- perform specific tasks including, but not limited to, welding, soldering, item test and inspection, filler, immersion testing.
  
• Maintain materials, equipment, and work area in a clean and orderly condition.
  
• Comply with all rules and regulations of Raytheon Technologies, including, but not limited to: Environmental Health and Safety,
  
• Complete assigned tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individual skills.
  
• Check work methods and results for conformance to standards and re-instruct as required.
  
• Report to lead or supervisor on work progress and updates including conditions surrounding failures to meet quality standards.
  
• Other duties as assigned.
  

• 
  
• Typically requires a HS Diploma or GED.
  
• U.S. Person (U.S. citizen, permanent resident, or granted refugee or asylee status) as defined here: We Prefer:
  
  • 
    
  • Manufacturing experience is strongly preferred
    
  • Career Readiness Certification (CRC) strongly preferred.
    
  • The ability to interpret schematics and/or technical drawings.
    
  • The ability to successfully complete training modules associated with job grade.
    
  • The ability to follow assembly instruction.
    
  • The ability to effectively work in an environment requiring repetitive job responsibilities.
    
  • The ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
    
  • The ability to understand end uses of products being built.
    
  • Strong written and verbal communication skills.
    
  • Attention to detail to ensure safety and quality.
    
  • Strong organizational skills and ability to multi-task.
    
  • The ability to work in a team to support work capacity in a fast-paced environment.
    
  • Intermediate computer skills in terms of typing, navigating screens and learning new software programs.
    
  • Demonstrated analytical skills and problem-solving abilities.
    
  • The ability to take direction from more experienced coworkers, leads and supervisors.
    
  
  What We Offer:
  1st shift schedule: Monday - Friday; 6:30am - 3:00pm
  Some of our competitive benefits package includes:
  
  • 
    
  • Medical, dental, and vision insurance
    
  • Three weeks of vacation for newly hired employees
    
  • Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option
    
  • Employee Scholar Program, tuition reimbursement program
    
  • Life insurance and disability coverage
    
  • Optional coverages you can buy: Pet Insurance, Home and Auto, additional life insurance, accident insurance, critical illness insurance, group legal
    
  • Ovia Health, fertility and family planning
    
  • Employee Assistance Plan, including up to 5 free counseling sessions
    
  • Incentives for a Healthy You
    
  • Bright Horizons, back-up child / elder care and college coach resources
    
  • Autism Benefit
    
  • Doctor on Demand, virtual doctor visits
    
  • Adoption Assistance
    
  • Teladoc Medical Experts, second opinion program
    
  • And more!
    
  
  Learn More and Apply Now!
  Collins Aerospace, a RTX company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio and expertise to solve customers' toughest challenges and to meet the demands of a rapidly evolving global market.
  Avionics delivers advanced cockpit displays, vision systems, and comprehensive digital solutions for global government, commercial and business aviation customers. We provide connectivity and managed data services to ensure safety and seamless communication for passengers, crews, and militaries, from aircraft and airports to air traffic management. Join us in creating solutions that connect the world, one flight at a time. Start your application today.
  *Please ensure the role type (defined below) is appropriate for your needs before applying to this role.
  Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
  Regardless of your role type, collaboration and innovation are critical to our business and all employees will have access to digital tools so they can work with colleagues around the world - and access to Collins sites when their work requires in-person meetings.
  At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other -- propel us all higher, again and again.
  Apply now and be part of the team that's redefining aerospace, every day.
  The starting rate of pay for this role is $20.00/hour; however RTX considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate's work experience, location, education/training, and key skills.
  As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
  Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
  Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.
  This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.
  RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
  RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.
  Privacy Policy and Terms:
  Click on this link to read the Policy and Terms

Job Title: Manufacturing Engineer

Department: Coating Services

Status: Full Time - Exempt

Reporting To: Director of Operations / X40 Production Manager

Position Purpose:

We are seeking a proactive and technically skilled Manufacturing Engineer to support and improve manufacturing processes applied to customer-supplied medical devices. This individual will be responsible for process improvement, leading root cause investigations, working closely with cleanroom operators across shifts, and serving as a key technical liaison with both internal teams and external customers. This role requires up to 25% international travel to support HMS production sites, audits, process transfers, and troubleshooting.

Responsibilities:

Production Support & Engagement

• Build strong relationships with production staff and foster a culture of collaboration and continuous improvement
• Monitor and adjust key process variables to ensure product consistency and high-quality output
• Assist with new process transfers from Method Development to Production

Process Improvement

• Continuously improve coating processes (e.g., dip, plasma)
• Apply Lean principles to manufacturing processes (eliminate waste in the manufacturing process and apply innovative systems to improve company workflows)
• Maintain and revise technical documentation including SOPs, work instructions, and validation of PQ protocols
• Perform internal audits on manufacturing lines
• Analyzing production data to identify areas for improvement in efficiency, cost, and quality.

Root Cause Analysis & Technical Problem-Solving

• Lead structured, cross-functional, root cause investigations for coating-related defects or process deviations using methodologies such as 5 Whys, Fishbone Diagrams, and DMAIC
• Act as the technical lead during customer escalations, investigations, and audits related to coating performance or compliance related to manufacturing
• Drive the implementation of corrective and preventive actions (CAPAs) and ensure timely documentation and communication of findings

Compliance & Documentation

• Ensure manufacturing processes comply with ISO 13485 and internal QMS requirements
• Support and lead validation activities for new and modified processes
• Maintain accurate and compliant documentation to support audits and regulatory inspections
• Implementing and monitoring quality control procedures to ensure products meet customer spec.

Support and/or perform other duties as required

Education, Qualifications & Experience:

• Bachelor’s degree in Engineering (Mechanical, Industrial, Manufacturing) or a related field
• 5+ years of experience in manufacturing engineering, industrial engineering, or process engineering role, preferably in a regulated medical device or pharmaceutical environment
• Lean / Six Sigma Green Belt or higher preferred.
• Demonstrated expertise in leading root cause investigations and communicating findings directly to customers
• Experience working in or supporting cleanroom operations and collaborating with production operators
• Knowledge of coating processes and surface treatments for medical devices is strongly preferred
• Familiarity with process validation, GMP, and ISO 13485
• Excellent interpersonal and communication skills – comfortable interfacing with both customers and shop floor teams.
• Proficiency in CAD/CAM software (or similar): Ability to use computer-aided design and manufacturing software for design and simulation.

Working Conditions and Health & Safety:

• Heated and air-conditioned office environment
• ISO Class 7 Cleanroom
• Laboratory
• Employee is required to use appropriate PPE including, but not limited to, nitrile or latex gloves, lab coat, hair bonnet, shoe covers, beard cover, safety glasses, hearing protection, face shield, or respiratory mask while working in a lab or manufacturing space.

Harland Medical System’s commitment to ensure employee health and safety is a priority. Personnel engaged in manufacturing shall obtain training required by ISO 13485, FDA 21 CFR part 820, FDA 21 CFR part 210 & 211, and Harland Medical System’s internal procedures, where deemed appropriate per assigned job functions.

Physical Demands:

While performing the duties of this job, the employee is regularly required to sit for prolonged period of time. The employee is frequently required to talk and hear; use hands to handle or feel; and reach with hands and arms above shoulder height and below the waist. Using proper lifting techniques, the employee must be able to lift up to 40 lbs.

Gray’s Specialty Equipment segment offers a comprehensive range of expert services to design, manufacture, integrate, install, and maintain some of the most advanced systems on the market. The Specialty Equipment segment includes Anderson Dahlen, located in Ramsey, MN, and Waconia, MN. Anderson Dahlen delivers end-to-end equipment design-build and contract manufacturing, with precision fabrication – cutting, forming, machining, welding, finishing, and complex assemblies – backed by engineering, integration, and complete process solutions including skids and sanitary platforms tailored to customer applications. Anderson Dahlen is ISO 9001:2015 certified, as well as ASME, AWS, and PED compliant. 

The wage range for this role takes into account a wide range of factors that are considered in making compensation decisions, including but not limited to skill sets, experience and training, certifications, as well as other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. It is not typical for an individual to be hired at or near the top of the range for their role, and compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the current range is $64,000-$95,000/annually. 

Our comprehensive health plan options, including medical, dental, and vision insurance, provide our team members with the tools they need for treatment, preventative care, exams, and prescriptions. ADI’s life, disability, and supplemental insurance options provide peace of mind and support to rely on in challenging times. Our team members overseas are offered private health insurance, life insurance, and an employee assistance program (EAP).  

Prepare accurate cost estimates for fabricated metal components and assemblies by gathering information, analyzing critical metrics, and performing risk assessments. This role requires fluency in manufacturing processes, strong knowledge of bills of material and routings for metal products, and experience with ERP estimating systems. The Estimator works closely with internal teams, vendors, and customers to support successful project execution. 

• Bachelor’s or Associate degree in Industrial Engineering, Mechanical Engineering, or a related field preferred; equivalent experience considered.
• Working knowledge to proficient GD&T. welding symbols, and AWS/ASME welding codes.
• Understand parts, projects, and customer requirements.
• Determine key variables for labor, material, and process costs.
• Research and analyze manufacturing methods, production times, and materials.
• Gather, review, and evaluate vendor and subcontractor quotes.
• Perform risk analysis and identify cost drivers.
• Create and submit accurate estimate reports or bids to project managers, sales teams, and customers.
• Build and maintain strong relationships with vendors, subcontractors, and suppliers.
• Read and interpret blueprints, schematics, and statements of work.
• Utilize ERP and other quoting systems to develop estimates.
• Apply basic mathematics and problem-solving skills to estimating activities.
• Communicate clearly through presentations and written documentation.
• Support continuous improvement efforts and process standardization.

PHYSICAL REQUIREMENTS:

The company fosters a manufacturing-type environment. This position will primarily involve operating a computer at a desk in an office environment. 

• Lift/Carry-
• 0-10 lbs.- Occasionally
• 11-50 lbs.- Never
• 51-100 lbs.- Never
• Push/Pull-
• 0-25 lbs.- Occasionally
• 26-75 lbs.- Never
• 76-100 lbs.- Never
• Bend- 0-33% during an 8-hour shift
• Twist/Turn- 0-33% during an 8-hour shift
• Kneel/Squat- Not at all
• Sit- 67-100% during an 8-hour shift.
• Stand/Walk- 0-33% during an 8-hour shift
• Overhead Reaching- 0-33% during an 8-hour shift
• Ladder/Stair- 0-33% during an 8-hour shift

EEO DISCLAIMER:

Gray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

PI9cc2067eb436-38

About the Role

As a Product Designer, you are passionate creative, responsible for developing products and packaging for CURiO Brands that are innovative, beautiful, safe, and sellable to end consumers. You have a strong artist hand and are confident in illustration, painting, and other traditional mediums. You’ll leverage your unique talents, such as illustration and surface design, to create and source custom vessels (glass, metal, and ceramic) and secondary packaging (paper boxes, tubes, bags, labels, hangtags), through the opportunity to work on CURiO’s exciting brands Capri Blue, Thymes, and Otherland.

***This role is for candidates who reside within 60 miles of our office in Minneapolis, MN***

What You’ll Do

Design & Concept:

• Collaborate with Product Design Manager and team, along with Brand to research and concept new product ideas.
• Develop mood boards for new product collections and product formats.
• Push creative boundaries to drive great design and strong innovation.
• Proactively research market trends and innovation opportunities.
• Work with vendors to source and develop new techniques and manufacturing capabilities.
• Prepare creative presentations and present concepts to internal brand team and external customers.
• Demonstrate systematic approach in designs for varying structures, materials, sizes and product types.
• Brand steward, keen eye for detail, refine designs across selected product assortment.
• Create 3D renderings, recommend dimensions, and determine materials for product and packaging.
• Communicate with domestic and international vendors to achieve design intent, construction, safety, and usability goals. Contribute problem-solving ideas throughout the development process.
• Participate in the approval of prototype samples for style details, construction, safety, and usability. Organize and label incoming samples and approved counters.
• Attend weekly Design & Innovation status meetings and other meetings as needed.
• Work closely with Brand, Project Management, Engineering, R&D, Purchasing, Quality, Production, Finance, and Sales to ensure development is on track to meet project goals, design intent and timeline.
• Develop constructive and collaborative working relationships with vendors, colleagues, and others, maintaining them over time to produce successful results for the design team.
• Request price quotes and work with vendors to ensure target costs are achieved.
• Work closely with Project Management team and Cost Analyst on costing exercises. Contribute to product cost discussions, providing insights and ideas on how to cost engineer new developments to meet cost objectives.
• Work with the production artist for execution of final printable files.
• Work closely with external vendors, helping to build strong partnerships.
• Work closely with print vendors to develop structures, reviews proofs for color/ detail accuracy and attend press checks as needed. Color advocate for the brand standards.
• Cut and mock-up packaging/ product samples to support marketing team with photoshoot and sample needs.
• Provide design specifics and photos of development samples for specification documents.

As a Curio Team Member

• You exemplify CURiO Cornerstones and strive for personal leadership in your role.
• You collaborate across teams and maintain a positive, respectful, and cooperative workplace environment.
• You take ownership of your professional development by seeking learning opportunities and staying current in your field.
• You manage your time effectively and work with others to contribute to team and company goals.
• You follow all safety guidelines, report concerns promptly, and maintain a clean, safe, and organized workspace.
• You understand that success in your role could include occasional extended work hours as necessary to meet seasonal deadlines and that periodically, you may be asked to perform other duties not included in your role description.

What You Bring

Qualifications:

• Bachelor of Fine Arts degree; emphasis in graphic or industrial design or equivalent work experience
• Two years’ experience in product or packaging development or design
• Brings passion for the creative work and brand storytelling
• Strong knowledge of design techniques, ability to think creatively, with an eye for color and design
• Demonstrated success in working collaboratively with team members and across multiple departments, managing a large volume of projects simultaneously
• Proficient in design software; Adobe CS (Photoshop, InDesign, Illustrator)
• Proficient in Microsoft Office Suite.

Preferred:

• Surface design and illustration skills
• 3D printer experience

Core Competencies:

• Committed to development strong ideas and excellent execution
• Excellent critical thinking and problem-solving skills
• Excellent attention to detail, well organized, and systematic in working
• Strong leadership and communication skills
• Ability to present concepts and ideas with exceptional presentation and writing skills
• Excellent initiative and follow-through
• Ability to build and maintain relationships with business partners
• Self-Driven, energetic, able to work independently
• Ability to maintain and protect company proprietary information.

Additional Information

• Travel Requirement: less than 5%
• Work Environment: General office or home office environment
• Physical Requirements:
• Occasionally required to lift and/or move items weighing 10 – 15 pounds.
• When in a facility, occasional exposure to dusty and fragrant conditions

Why Join CURiO

At CURiO, we craft beautiful experiences for the home and body through our fragrance and personal care brands. We’re committed to creating a collaborative, inclusive workplace where talent can thrive and grow. You’ll be part of a passionate team driving meaningful work — with the agility of a growth company and the heart of a purpose-driven brand.

Health & Welfare Benefits

Eligibility begins on the first day of the month following 30 days of employment unless noted otherwise:

• Medical, Dental, Disability Insurance (cost shared)
• Life/ AD&D Insurance (employer paid)
• Additional voluntary benefit offerings (employee paid): Vision, Accident, Flexible Spending Account, Health Savings Account, Dependent Care Flexible Spending Account, Voluntary Term Life Insurance, AD&D
• 401(k) – After 6 months of employment on next quarterly entry date

Equal Opportunity Employer

Curio is proud to be an Equal Opportunity Employer. We celebrate diversity and are committed to building an inclusive environment for all employees.

Grays Specialty Equipment segment offers a comprehensive range of expert services to design, manufacture, integrate, install, and maintain some of the most advanced systems on the market. The Specialty Equipment segment includes Anderson Dahlen, located in Ramsey, MN, and Waconia, MN. Anderson Dahlen delivers end-to-end equipment design-build and contract manufacturing, with precision fabrication cutting, forming, machining, welding, finishing, and complex assemblies backed by engineering, integration, and complete process solutions including skids and sanitary platforms tailored to customer applications. Anderson Dahlen is ISO 9001:2015 certified, as well as ASME, AWS, and PED compliant.

The wage range for this role takes into account a wide range of factors that are considered in making compensation decisions, including but not limited to skill sets, experience and training, certifications, as well as other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. It is not typical for an individual to be hired at or near the top of the range for their role, and compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the current range is $22-$35/hour.

Our comprehensive health plan options, including medical, dental, and vision insurance, provide our team members with the tools they need for treatment, preventative care, exams, and prescriptions. ADIs life, disability, and supplemental insurance options provide peace of mind and support to rely on in challenging times. Our team members overseas are offered private health insurance, life insurance, and an employee assistance program (EAP).

PRIMARY OBJECTIVE/QUALIFICATIONS OF THE POSITION:

• Performs a full range of rough grinding, polishing, and metal finishing operations on components, manufactured parts, and assemblies in accordance with prescribed specifications, quality standards, and safety requirements.
• Follow all safe work practices and OSHA requirements.
• Grind, file, sand, polish, and blend metal surfaces using hand tools, power tools, and finishing techniques.
• Examine and feel metal surfaces to detect defects such as dents, scratches, or material imperfections.
• Set up and operate straight-line sanders, buffers, Timesavers, and hand-held grinders and polishers.
• Select proper abrasives and finishing methods to achieve specified finishes efficiently and consistently.
• Read, understand, and apply blueprints, customer requirements, and written or verbal work instructions.
• Complete projects within established timeframes while meeting or exceeding quality standards.
• Monitor and maintain quality of finished goods throughout the process.
• Use profilometers and other measuring tools to verify surface finish requirements.
• Stage work and operate equipment independently as skill level allows.
• Develop, improve, and standardize finishing processes and techniques while maintaining high quality standards.
• Contribute to continuous improvement, cost-saving initiatives, and quality enhancements.
• Train, mentor, and support other finishers as experience level allows.
• Work effectively in a team environment and maintain positive working relationships.
• Understand and follow all company policies and procedures.
• Perform other duties as assigned.

PHYSICAL REQUIREMENTS:

The company fosters a manufacturing-type environment. Moderately heavy work requires the occasional lifting of objects weighing 50 pounds or less. In the performance of essential duties, the incumbent may be required to operate a variety of industrial machining tools.

• Lift/Carry-
• 0-10 lbs. continuously.
• 11-50 lbs. frequently
• 51-100 lbs. never
• Push/Pull-
• 0-25 lbs. continuously
• 26-100 lbs. frequently
• Bend- 34-66% during a 10-hour shift.
• Twist/Turn- 34-66% during a 10-hour shift.
• Kneel/Squat- 0-33% during a 10-hour shift.
• Sit- 0-33% during a 10-hour shift.
• Stand/Walk- 0-33% during a 10-hour shift.
• Overhead Reaching- 0-33% during a 10-hour shift.
• Ladder/Stair Climb- 0-33% during a 10-hour shift.

EEO DISCLAIMER:

Gray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

Compensation details: 22-35 Hourly Wage

PIc6c41658b437-26289-39837399

Overview:

As a Product Owner in Affinity Solutions Technology (AST) you will lead a cross-functional agile team implementing technology solutions for Securian's Affinity Solutions and Securian Canada markets. AST teams demonstrate passion for delivering innovative solutions for clients, customers, and internal partners, driven by creative problem-solving skills, strong collaboration, and analytical abilities.

You need to be passionate about delivering business value through technology while remaining flexible to adapt to evolving and emerging needs. You will partner with stakeholders to define your team's strategy and roadmap, owning your team's prioritization and delivery. You will work closely with your team, other Product Owners, business stakeholders, engineering leaders, and technology partners to deliver solutions using a blend of methodologies.

Responsibilities include but not limited to:

• Partners with the business to build trust and translate operations, customer needs, and technology into impactful digital solutions-resolving trade-offs, managing risks and dependencies, creating and driving product roadmaps with a focus on measurable outcomes, and communicating transparently.

• Maintains a backlog to prioritize work/stories for the team by synthesizing all relevant data, research and any other available information.

• Engages stakeholders through ongoing collaboration to understand evolving customer needs, advocate for the business, and share insights with teams to drive alignment and optimal outcomes.

• Leverages emerging best practices and market trends to drive operational efficiencies and align technology strategies with business goals.

• Uses all available resources (e.g., analytics, reporting, surveys, ethnographic research, qualitative data, usability testing) to understand product performance and customer satisfaction.

• Effectively communicates product value through storytelling, connecting to business/customer impact and engages stakeholders in strategic decisions to optimize outcomes.

• Cross functional understanding of how their work integrates with other business workstreams and initiatives.

• Understands how to leverage team effectiveness metrics (e.g., velocity/cycle time) to drive value.

• Contributes to strategic product decisions by incorporating total cost of ownership and providing input into operating budget planning.

• Participates in governance meetings and communicates technical and business product status and progress with senior leaders.

• Creates product delivery commitments such as service level agreements and BCM plans to support resiliency requirements.

• Engages in product discovery efforts to identify strategic opportunities.

• Proactively develops and demonstrates advanced knowledge of and experience with the technical product(s) and is conversant in the product architecture to drive growth and improve customer experience.

• Directly responsible for implementation, configuration, and/or continuous improvement of a technical product based on value

• Anticipates and identifies new product opportunities to drive value. Provides input and leads the design of meaningful tests and learning opportunities.

• Ensures project delivery is in conformance with company methodologies and standards; leads and provides guidance for project management for initiatives, ensuring business objectives are met and business benefits are delivered.

Qualifications:

• Working knowledge of agile practices. Understands the fundamentals of iterative development, incremental delivery, backlog management, burndown metrics, velocity, and task definition.

• Leadership skills to gain credibility, garner respect, guide the creation of a self-organizing team, being assertive with business priorities and opposing viewpoints while adhering to agile concepts and principles.

• Ability to influence teams to deliver great customer experience without direct authority.

• Working knowledge of Product Management practices.

• Strong communication, facilitation, and interpersonal skills to engage agile team and stakeholders, facilitate discussions, negotiate, and resolve conflict.

• Strong analytical and critical-thinking skills, creative problem-solving skills, and attention to detail.

• Ability to work with minimal direction, flexibility to adapt to shifting priorities and schedules, handle multiple issues simultaneously, and manage stressful situations for self and team.

• Strong knowledge of technology and architectural principles to drive implementation of scalable, maintainable, and resilient solutions.

Preferred Qualifications:

• Proven track record as a Product Owner or individual contributor responsible for value and viability of technology solutions.

• Proven track record working in an agile environment while delivering results based on effective prioritization.

• Experience with stakeholder management and collaboration.

• Ability to quickly learn new domains and adapt to changing business needs.

• Knowledge of product and project and portfolio management best practices.

• Ability to communicate effectively with diverse audiences including executives, customers, and technical teams.

• Experience identifying critical emerging business needs and service challenges and ability to quickly and effectively shift/coordinate resources to deliver immediate impact.

• Proven ability to engage with both individual contributors and leaders of the highest levels in constructive and collaborative relationships.

• Demonstrated results of gaining credibility, gaining respect and building trust, guiding the creation of self-organizing teams and being assertive with business priorities and opposing viewpoints while adhering to agile concepts and principles.

#LI-hybrid **This position will be in a hybrid working arrangement.**

Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes), you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.

The estimated base pay range for this job is:

Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.

Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:

Paid time off:

• We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.

• Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.

• Holidays: Securian provides nine company paid holidays.

Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.

Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.

Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.

Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:

• Mental Wellness and Disability

• Pride at Securian Financial

• Securian Young Professionals Network

• Securian Multicultural Network

• Securian Women and Allies Network

• Servicemember Associate Resource Group

For more information regarding Securian's benefits, please review our Benefits page.

This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.

Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).

To view our privacy statement click here

To view our legal statement click here

• Responsible for managing, planning, coordinating, and directing the procurement of nuclear fuel commodities in an effective and efficient manner.
• Leads the development and implementation of strategies and actions to respond to emergent nuclear fuel industry related issues. Stays abreast of ever-changing nuclear fuel supply markets and industry events impacting nuclear fuel supply.
• Supports Xcel Energy Regulatory in developing nuclear fuel related data for regulatory filings, responses to regulatory interrogatories, and routine required reporting.
• Acts as Program Owner for 10 CFR Part 810 in support of nuclear and information technology.
• Supports the ongoing operations of the sites and remains jointly accountable with site personnel for meeting site performance objectives.
• Represents Xcel Energy in external meetings with State Regulators, Industry Working Groups, Xcel Energy customers, and others as requested.
• Support Xcel Energy Federal Lobbyists on nuclear fuel related issues.

• BS or BA in Engineering, Applied Sciences, Business, or related field with a minimum of 10 years nuclear industry experience.
• Preferred: Nuclear engineering management/oversight experience.
• Demonstrated success in leadership and team building skills.
• Experience negotiating contracts with external parties.
• Excellent communication skills are required.
• Must have knowledge of nuclear fuel generation systems and fuel requirements, reload safety analyses, reactor engineering, nuclear fuel purchasing methodologies, risk management tools and strategies, government regulations regarding nuclear fuel.

Pride Health is looking a Software Quality Assurance Analyst to support our client’s medical facility which in Hybrid Role in Rochester, MN

Job Type: Software Quality Assurance Analyst

Location: Hybrid, Rochester, MN

Duration: 26 Week contract with possibility of extension

Onsite Requirement: Occasional onsite build days (as needed)

Rate: $30 to 38/hr

Job Summary

This position provides software quality assurance services for projects and systems. The role is responsible for supporting product validation activities for new and modified applications and ensuring that software products meet defined quality standards.

Key Responsibilities

• Support the development of deliverables including defining, performing, and documenting product validation for new and/or modified applications.
• Investigate operational and process problems in collaboration with engineering and technical personnel.
• Maintain quality records and metrics status reports.
• Guide and direct lower-level personnel on the setup and performance of quality controls.
• Devise and apply quality controls for in-house and vendor-provided products.
• Assist in executing quality reviews under the direction of the project team or senior quality colleagues.
• Maintain test libraries and scripts in test management tools such as Quality Center when required.

Work Being Performed

• Documentation and execution of manual test cases supporting several vended web and mobile applications within the provider and patient space.

Required Experience

Candidates must have experience with:

• Testing vended applications
• Testing mobile and web applications
• Using ADO (Azure DevOps)
• Working with Agile and Waterfall methodologies
• Actively participating in meetings
• Documenting, maintaining, and executing well-structured manual test cases
• Prioritizing work across multiple product lines in a fast-paced environment
• Self-motivated approach to identifying answers and resolving knowledge gaps

Required Skills

• Software testing
• Azure DevOps (ADO)
• Strong analytical thinking skills
• Excellent documentation skills
• Ability to interact with stakeholders at all organizational levels
• Ability to work independently and within teams
• Strong organizational and communication skills
• Ability to analyze software development documentation including:
• Business requirements
• Functional specifications
• Design specifications
• Ability to understand systems and business operational practices related to product validation
• Ability to communicate effectively with both technical and business audiences

Technical Knowledge

Candidates should be experienced with software development lifecycles as they relate to product verification and validation, including preparation of testing reports and coordination of project testing activities. Experience mentoring testing colleagues and project teams on testing processes is also required.

Strong experience using productivity software such as Microsoft Word, Excel, PowerPoint, and web browsers is required.

Education Requirements

Required Education

One of the following is required:

• Bachelor of Science degree with training/experience in software development, software testing, or quality control
• OR
• Associate’s degree in a computer-related field and two (2) years of professional experience in software development, software testing, or quality control
• OR
• Six (6) years of professional experience in software development, software testing, or quality control

Certifications

Preferred:

Certification or training in quality or testing such as:

• ISO Service Management
• CSTP
• ITIL

Benefits

Pride Global offers eligible employees comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance, and hospital indemnity), 401(k)-retirement savings, life & disability insurance, an employee assistance program, legal support, auto, home insurance, pet insurance, and employee discounts with preferred vendors.

Equal Opportunity Employer

As a certified minority-owned business, Pride Global and its affiliates - including Russell Tobin, Pride Health, and Pride Now - are committed to creating a diverse environment and are proud to be an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, pregnancy, disability, age, veteran status, or other characteristics.

Procurement Specialist

Brown Tank LLC | Oakdale, MN

Full-Time | Onsite | Non-Union

Send Resume’s to Julie Larson -

Phone: 1-651-529-8994

Job Summary:

The Procurement Specialist is responsibility for all commodities & services and will secure long-term total quality, delivery, cost efficiency, and sustainability of material and services throughout project lifecycles.

Duties/Responsibilities:

• Responsible for assisting Procurement Manager with supplier relationships, securing targeted levels of cost, quality, delivery, sustainability, and supply continuity.

• Coordinate with receiving department to ensure material ordered is received.

• Works with AP department to ensure timely payment of invoices for products ordered and delivered. 

• Assist with development, implement, and manage commodity and supplier strategies that meet internal and external customer demands on a continuous basis. 

• Develop, implement, and manage supplier performance and rating based on Key Performance Metrics (KPI) for Quality, Delivery, and Cost. 

• Find, assess, and develop new suppliers as needed in accordance with company direction and in alignment with engineering and project management.

• Conduct detailed demand, spend, cost and market analysis using a structured approach to maintain best overall product cost. 

• Work with sales, project management, finance, manufacturing, safety, and construction teams to establish an efficient and effective supply chain and support corporate goals of on-time delivery, quality, and material costs. 

Required Skills/Abilities: 

• Strong blueprint reading skills.

• Excellent verbal and written communication skills

• Strong negotiation skills, including an understanding of legal terms and conditions.

• Strong analytical skills, including a demonstrated ability to interpret and communicate market data and communicate that data within finance and project management.

• Strong organizational and problem-solving skills 

• Excellent interpersonal skills and the ability to work with multiple work groups and develop high quality working internal and external relationships.

• Flexibility and able to adapt to a fast-paced, rapidly changing work environment with unexpected issues or events.

• Proficiency in MS Office applications (Outlook, Teams, Word, Excel, Project)

• Ability to maintain confidentiality regarding proprietary company information.

Education and Experience:

• Bachelor’s degree in business management, Construction management, or related field and/or 2-3 years of material purchasing experience.

• Manufacturing, welding, project management, or construction experience

• Experience in managing the following commodities: metals, machining, welding, and MRO.

• Previous experience in a high mix/low volume manufacturing/fabrication environment 

Physical Requirements: 

• Prolonged periods sitting at a desk and working on a computer.

• Must be able to lift to 50 pounds at times.

• May be asked to travel to visit vendors, attend trainings or different company events.

• Must be able to navigate shop environment.