Engineering Structures Elsevier Jobs in Warsaw, IN
18 positions found — Page 2
Job Title: Robot Programmer / Technician – Fanuc
Location: Warsaw, IN
Role Overview
We are seeking Robot Programmers/Technicians with hands-on Fanuc robotics experience to support integration and commissioning efforts for a high-volume automotive manufacturer in Northern Indiana.
This role requires strong hands-on experience with Fanuc robotics, body shop applications, and special means build. The selected candidates will support programming, touch-ups, commissioning, and quality collaboration during pre-commissioning and launch phases.
This is a high-impact, floor-support role in an active manufacturing and commissioning environment.
Mandatory Skills
- 2–5 years of experience with robot setup, troubleshooting, and/or programming
- Experience with Fanuc robotics (SpotTool+ & V9.40 for R30iB Plus controller preferred)
- Certification-only Fanuc experience is acceptable
- Must be willing to work onsite in Warsaw, IN – 6 days/week, 12-hour shifts
Key Responsibilities
Programming & Optimization
- Develop, modify, and optimize Fanuc robot programs for body shop applications
- Configure robot frames, tools, payloads, and TCPs
- Support rapid program adjustments during special means builds
Commissioning & Startup Support
- Perform robot teaching, touch-ups, and recovery in production and pre-commissioning environments
- Support robot cell startup and offline system work
- Assist in commissioning activities under tight timelines
Troubleshooting & Floor Support
- Troubleshoot robot alarms, motion issues, and sequence ladder logic
- Coordinate with Controls teams to validate I/O, interlocks, and handshaking
- Provide on-floor programming support during peak production periods
Quality & Collaboration
- Work closely with Quality teams to improve weld quality, part accuracy, and repeatability
- Support containment actions and fast-turn engineering changes
- Follow all safety procedures in active manufacturing environments
Required Qualifications
- 2–5 years of industrial robotics experience
- Strong hands-on Fanuc programming and troubleshooting
- Experience in automotive body shop environments preferred
- Ability to work extended shifts in a fast-paced manufacturing setting
- Strong problem-solving and teamwork skills
Job Title: Robot Programmer / Technician – Fanuc
Location: Warsaw, IN
Role Overview
We are seeking Robot Programmers/Technicians with hands-on Fanuc robotics experience to support integration and commissioning efforts for a high-volume automotive manufacturer in Northern Indiana.
This role requires strong hands-on experience with Fanuc robotics, body shop applications, and special means build. The selected candidates will support programming, touch-ups, commissioning, and quality collaboration during pre-commissioning and launch phases.
This is a high-impact, floor-support role in an active manufacturing and commissioning environment.
Mandatory Skills
- 2–5 years of experience with robot setup, troubleshooting, and/or programming
- Experience with Fanuc robotics (SpotTool+ & V9.40 for R30iB Plus controller preferred)
- Certification-only Fanuc experience is acceptable
- Must be willing to work onsite in Warsaw, IN – 6 days/week, 12-hour shifts
Key Responsibilities
Programming & Optimization
- Develop, modify, and optimize Fanuc robot programs for body shop applications
- Configure robot frames, tools, payloads, and TCPs
- Support rapid program adjustments during special means builds
Commissioning & Startup Support
- Perform robot teaching, touch-ups, and recovery in production and pre-commissioning environments
- Support robot cell startup and offline system work
- Assist in commissioning activities under tight timelines
Troubleshooting & Floor Support
- Troubleshoot robot alarms, motion issues, and sequence ladder logic
- Coordinate with Controls teams to validate I/O, interlocks, and handshaking
- Provide on-floor programming support during peak production periods
Quality & Collaboration
- Work closely with Quality teams to improve weld quality, part accuracy, and repeatability
- Support containment actions and fast-turn engineering changes
- Follow all safety procedures in active manufacturing environments
Required Qualifications
- 2–5 years of industrial robotics experience
- Strong hands-on Fanuc programming and troubleshooting
- Experience in automotive body shop environments preferred
- Ability to work extended shifts in a fast-paced manufacturing setting
- Strong problem-solving and teamwork skills
Position Summary
The CNC Machinist II produces machined parts by operating a computer numerical control (CNC) machine; maintaining quality and safety standards; keeping records; maintaining equipment and supplies. The role requires the above to be accomplished within Tecomet‘s principles of continuous improvement, customer driven innovation and a win first culture, while meeting company financial and other performance metrics.
Principle Responsibilities
- Operate and Set-up CNC machines within specified tolerances following work instructions and in accordance with machine programs and engineering drawings.
- Perform difficult CNC Machinist work including progressive machining of a variety of parts and different metals where very close tolerances must be maintained.
- Change dull tooling, and/or make minor offsets and adjustments as needed for tooling wear.
- Ensure product quality is achieved by working to operator owned quality (OOQ) standards and requirements including using a range of measuring equipment and interpreting readings.
- Perform routine maintenance as per daily machine checklist and adhere to PM schedule.
- Perform hand finishing.
- Always Follow Good Manufacturing and Good Document Practices (GMP/GDP) including completion of job routers/ cards.
- Ensure safe working practices are carried out to minimize risks to the job holder and/or colleagues, including identifying and reporting Safety, Health & Environmental issues.
- Achieve set productivity targets and identify ways of improving productivity.
- Record all activities in a timely manner on the job tracking system.
- Identify and support Continuous Improvement activities.
- Identify and escalate manufacturing issues to the Team Leader and/or Supervisor, participating in the resolution as required.
- Maintain 5S/housekeeping standards within work area.
Performs other duties or special projects as required or as assigned by supervisor
Qualification Requirements
Credentials/Experience:
- High School diploma or general education degree (GED) required
3+ years CNC Machining experience.
Experience/Educational/Training Preferred:
- Associate’s degree/certificate in Tooling & Machining or Machinist apprenticeship preferred.
- Experience of working in a production environment, preferred
GCSE/NVQ Math and English is desirable (UK only)
Knowledge, Skills, and Abilities:
- Ability to operate, setting up and maintaining a CNC Machine
- Ability to run multiple CNC Machines
- Solid necessary math skills, including measuring and keeping count records
- Effective at planning, prioritizing and organizing tasks and activities with the ability to deal with competing demands within specified timescales
- Ability to follow work instructions
- Proven record of quality, on-time production runs
- Demonstrable commitment to safety at all times
- Attention to detail alongside ability to perform repeatable task over a prolonged period of time
- Positive attitude, reliable, and a team player
- Ability to identify problems and escalate as required
- Good communication skills, written and verbal
- Solid computer skills
Excellent communication and interpersonal skills
Other Requirements
Work Environment
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Physical Requirements
While performing the duties of this job, the employee could be required to stand. The employee could frequently be required to walk; use hand to finger, handle, or feel; reach with hands and arms and talk or hear. The employee could be required to sit; climb or balance and stoop, kneel, crouch, or crawl. The employee could occasionally lift and or move up to 50 pounds. Specific vision abilities required by the job could include close vision, distance vision, peripheral vision and ability to adjust focus.
Travel Requirements
N/A
Americans with Disabilities Act (ADA): Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company.
Job Title: Robot Technician – Fanuc
Location: Warsaw, IN
Role Overview
We are seeking Robot Programmers/Technicians with hands-on Fanuc robotics experience to support integration and commissioning efforts for a high-volume automotive manufacturer in Northern Indiana.
This role requires strong hands-on experience with Fanuc robotics, body shop applications, and special means build. The selected candidates will support programming, touch-ups, commissioning, and quality collaboration during pre-commissioning and launch phases.
This is a high-impact, floor-support role in an active manufacturing and commissioning environment.
Mandatory Skills
- 2–5 years of experience with robot setup, troubleshooting, and/or programming
- Experience with Fanuc robotics(SpotTool+ & V9.40 for R30iB Plus controller preferred)
- Certification-only Fanuc experience is acceptable
- Must be willing to work onsite in Warsaw, IN – 6 days/week, 12-hour shifts
Key Responsibilities
Programming & Optimization
- Develop, modify, and optimize Fanuc robot programs for body shop applications
- Configure robot frames, tools, payloads, and TCPs
- Support rapid program adjustments during special means builds
Commissioning & Startup Support
- Perform robot teaching, touch-ups, and recovery in production and pre-commissioning environments
- Support robot cell startup and offline system work
- Assist in commissioning activities under tight timelines
Troubleshooting & Floor Support
- Troubleshoot robot alarms, motion issues, and sequence ladder logic
- Coordinate with Controls teams to validate I/O, interlocks, and handshaking
- Provide on-floor programming support during peak production periods
Quality & Collaboration
- Work closely with Quality teams to improve weld quality, part accuracy, and repeatability
- Support containment actions and fast-turn engineering changes
- Follow all safety procedures in active manufacturing environments
Required Qualifications
- 2–5 years of industrial robotics experience
- Strong hands-on Fanuc programming and troubleshooting
- Experience in automotive body shop environments preferred
- Ability to work extended shifts in a fast-paced manufacturing setting
- Strong problem-solving and teamwork skills
Position Summary
The CNC Machinist III produces machined parts by operating, setting up computer numerical control (CNC) machine; maintaining quality and safety standards; keeping records; maintaining equipment and supplies. May be required to perform some programming. The role requires the above to be accomplished within Tecomet’s principles of continuous improvement, customer driven innovation and a win first culture, while meeting company financial and other performance metrics.
Principle Responsibilities
- Operate, set up, and could program CNC mills, Wire EDM's, and CNC lathes within specified tolerances following work instructions and in accordance with machine programs and engineering drawings
- Propose new production Set ups and change offsets/tooling in machines as part of the new setup
- Perform difficult CNC Machinist work including progressive machining of a variety of parts and different metals where very close tolerances must be maintained
- Read and evaluate blueprints or specifications
- Troubleshoot and understand CNC programs and processes
- Improve and produce work Instructions
- Assist Engineering with redesigning fixtures to increase quality standards and productivity, change dull tooling, and/or make minor offsets and adjustments as needed for tooling wear
- Ensure product quality is achieved by working to operator owned quality (OOQ) standards and requirements including using a range of measuring equipment and interpreting readings
- Propose adjusted speeds and feeds for different machining requirements
- Perform routine maintenance as per daily machine checklist and adhere to PM schedule
- Perform hand finishing
- Always Follow Good Manufacturing and Good Document Practices (GMP/GDP) including completion of job routers/ cards
- Ensure safe working practices are carried out to minimize risks to the job holder and/or colleagues, including identifying and reporting Safety, Health & Environmental issues
- Achieve set productivity targets and identify ways of improving productivity
- Record all activities in a timely manner on the job tracking system
- Identify and support Continuous Improvement activities
- Identify and escalate manufacturing issues to the Team Leader and/or Supervisor, participating in the resolution as required
- Maintain 5S/housekeeping standards within work area
- Performs other duties or special projects as required or as assigned by supervisor
Qualification Requirements
Credentials/Experience:
- High School diploma or general education degree (GED)
5+ years CNC Machining experience
Experience/Educational/Training Preferred:
- Associate degree/certificate in Tooling & Machining or Machinist apprenticeship preferred
- GCSE/NVQ Maths and English is desirable (UK only)
Knowledge, Skills, and Abilities:
- Ability to operate, set up, and maintain a CNC Machine
- Ability to run multiple CNC Machines
- Ability to set up, adjust offsets and operate and run development and production jobs
- Ability to program with some level of supervision
- Solid necessary math skills, including measuring and keeping count records
- Effective at planning, prioritizing, and organizing tasks and activities with the ability to deal with competing demands within specified timescales
- Able to read and follow technical drawings and diagrammed instructions
- Proven record of quality, on-time production runs
- Demonstrable commitment to safety always
- Attention to detail alongside ability to perform repeatable task over a prolonged period
- Positive attitude, reliable, and a team player
- Problem solving ability
- Good communication skills, written and verbal
- Solid computer skills
- Ability to train new or lower-level machinist
Other Requirements
Work Environment
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Physical Requirements
While performing the duties of this job, the employee could be required to stand. The employee could frequently be required to walk; use hand to finger, handle, or feel; reach with hands and arms and talk or hear. The employee could be required to sit; climb or balance and stoop, kneel, crouch, or crawl. The employee could occasionally lift and or move up to 50 pounds. Specific vision abilities required by the job could include close vision, distance vision, peripheral vision and ability to adjust focus.
Travel Requirements
No
Americans with Disabilities Act (ADA): Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Equal opportunity employer as to all protected groups, including protected veterans and individuals with Disabilities
The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company.
We’re seeking dependable individuals who want to build a side income alongside their full-time work. This role offers flexible tasks you can perform outside your regular job hours. You’ll be given structured guidance and tools to identify side hustles that complement your main job, without conflict or burnout.
Responsibilities:
Work through curated side-hustle ideas and evaluate which suit your skills and schedule
Test and implement methods to generate extra income (e.g. remote tasks, micro-projects)
Track your time and earnings; maintain simple reports
Adjust your workflow and focus on the side hustles that deliver the best return
Requirements:
Must have a full-time job already (or other main commitment)
Reliable internet access and a device (laptop, tablet or smartphone)
Basic organization skills and ability to work independently
Willingness to learn and experiment
Preferred Qualities:
Self-motivated
Good at managing time
Comfortable trying new things
Able to commit a few hours each week
Benefits:
Work on your own schedule (evenings/weekends)
Low risk; minimal overhead
Opportunity to scale income over time
Support and guidance provided
We’re looking for people interested in a part-time remote opportunity to supplement their main income. This position is ideal for professionals, freelancers, and anyone who wants to improve their financial situation with flexible, manageable work.
You’ll receive access to structured resources explaining simple, effective ways to earn extra income using your existing skills and free time.
Responsibilities:
Review step-by-step guides and apply them independently
Choose methods that fit your experience and lifestyle
Monitor and report your own results to measure progress
Maintain consistency and reliability
Requirements:
Reliable internet connection and basic computer literacy
Strong self-motivation and time management
Comfortable working independently
Willingness to learn new approaches
Benefits:
Remote and flexible schedule
No selling or cold calling
Practical ways to build a stable side income
Opportunity for long-term financial growth
Job Description Permanent Position | 7 On / 7 Off Day Shifts | Rural NY Delphi Healthcare is seeking a Hospitalist Physician to join our team at Claxton-Hepburn Medical Center .
This permanent role offers a structured block schedule, competitive compensation, and the opportunity to provide high-quality care in a supportive, collaborative environment.
