Engineering Structures Elsevier Jobs in Roseland, NJ

• Prepare microbiological media, reagents, and test materials required for routine laboratory testing.
• Perform microbiological analyses on raw materials, finished products, environmental monitoring samples, and water systems.
• Practice and maintain strict aseptic techniques and laboratory disinfection procedures per SOPs.
• Ensure accurate, timely, and compliant documentation of laboratory activities in accordance with cGMP and data integrity standards.
• Maintain laboratory records including notebooks, electronic systems, and LIMS documentation.
• Perform quality assurance and laboratory monitoring activities, including:
• Media preparation and qualification
• Environmental and laboratory area monitoring
• Incubator and equipment monitoring
• Instrument calibration and maintenance
• Sterilization and cleaning verification
• Maintain a clean, organized, and inspection-ready laboratory work environment.

Qualifications

• Bachelor’s degree in Microbiology, Biology, or related life sciences field
• 0–2 years of laboratory experience (internship or academic laboratory experience acceptable)
• Basic understanding of microbiological techniques and scientific principles
• Familiarity with cGMP or regulated laboratory environments preferred
• Strong attention to detail and ability to maintain accurate laboratory documentation

Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.

Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.

What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.

Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.

Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.

Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Your new company

HAYS Recruitment is currently partnered with a full service engineering, design, and consulting firm. We are looking for a driven and detail-oriented Senior Commissioning Engineer who can lead the execution of projects and provide expert consultation. Join this dynamic engineering team, who are committed to delivering high-value energy solutions.

Your new role

• Plans, schedule, conduct and coordinate detailed phases of a project independently with other engineering disciplines
• Provide guidance and mentorship for junior level staff
• Work on innovative projects that balance cost-saving measures with long-term sustainability goals
• Provide technical development of proposals and external presentations for clients and regulatory agencies
• Monitor progress and performance on projects to ensure efficient production

What you'll need to succeed

• Bachelor's degree in Mechanical Engineering or related field required
• PE License required
• 10+ years of engineering experience relating to commissioning
• Must be able to understand construction documents, and fully understand the design and intended operation of the associated mechanical systems
• Experience with BAS systems
• Advanced proficiency with AutoCad, Revit, MicroStation
• Ability to demonstrate leadership skills and effectively work in a collaborative environment; proven ability to lead a team

What you'll get in return

• Compensation: $105-126K base
• Significant opportunity for bonus
• 401K
• Generous PTO package
• Full medical benefits
• Opportunity to work on impactful energy projects

What you need to do now

If you're interested in this Senior Commissioning Engineer role, click 'apply now' to forward an up-to-date copy of your resume, or call us now.

If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career.

Director of Maintenance – Bakery Manufacturing

Role Summary

The Director of Maintenance is responsible for providing strategic and hands-on leadership for all maintenance, reliability, and automation operations within the bakery facility. This role ensures the safe, reliable, and efficient operation of production equipment, utilities, and automated systems supporting 24/7 manufacturing.

Success is demonstrated through measurable improvements in equipment reliability, repair efficiency, cost control, and safety. This role also develops and implements structured training programs to strengthen technician skills in troubleshooting, automation, controls, and reliability best practices. The Director of Maintenance leads preventive and predictive maintenance programs, manages breakdown response, oversees maintenance systems and inventory, and supports capital projects, construction, and equipment installations. This position requires strong technical expertise, disciplined leadership, and a proactive reliability mindset.

Key Priorities

· Drive equipment reliability and up time across all production and utility systems.

· Establish a world-class preventive and predictive maintenance culture.

· Lead maintenance teams with a strong focus on safety, accountability, and continuous improvement.

· Support long-term automation and plant growth strategies.

· Ensure compliance with food safety, electrical safety, and machine safety standards.

Primary Responsibilities

Maintenance & Reliability Leadership

· Plan, manage, and continuously improve the preventive maintenance program to maximize equipment reliability and minimize downtime.

· Direct and coordinate all corrective maintenance activities across production and facility systems.

· Establish and lead structured root cause analysis (RCA) processes to eliminate repeat failures.

· Develop, track, and analyze maintenance KPIs related to downtime, MTTR, MTBF, and PM effectiveness.

Technical & Equipment Oversight

· Provide technical leadership for bakery production equipment.

· Ensure proper operation, maintenance, and reliability of compressed air, steam, water, and other critical utilities.

· Oversee maintenance and performance of robotic systems and automated production lines, including pick-and-place robots, automated packaging, and material handling systems.

· Develop and coordinate preventive and predictive maintenance strategies for the entire facility, reducing unplanned downtime and extending equipment life.

· Coordinate preventive and predictive maintenance programs for all equipment.

Projects & Capital Execution

· Plan and manage construction-related maintenance projects, facility upgrades, and equipment installations.

· Coordinate with engineering, contractors, and vendors to ensure projects are completed safely, on schedule, and within budget.

· Support commissioning, start-up, and validation of new equipment and production lines.

People Leadership & Development

· Lead, mentor, and develop maintenance leadership and technician teams.

· Lead training and skill development initiatives for maintenance technicians across all production and facility equipment systems.

· Foster a culture of ownership, accountability, and continuous learning within the maintenance organization.

· Partner cross-functionally with Operations, Engineering and Quality Teams.

Qualifications

Required

· Bachelor's degree in Electrical Engineering and/or Mechanical Engineering.

· Minimum 10–15 years of maintenance experience in food manufacturing (preferred), pharmaceutical, or industrial manufacturing environments.

· Minimum 5–7 years in a maintenance leadership or management role.

· Strong technical knowledge of bakery or food manufacturing equipment and utilities.

· Proven track record of implementing and improving maintenance and reliability practices.

· Demonstrated leadership skills with the ability to lead teams in fast-paced, 24/7 manufacturing environments.

· Strong communication, organizational, and problem-solving skills.

· High work ethic, flexibility, and ability to multitask effectively.

At Kushner, we pride ourselves on our four core values: Be Caring, Be Best in Class, Be Solution-Oriented, and Be Accountable. Our values represent what we strive to achieve every day. Every decision we have to make is guided by the “4 Be’s”. Our team and passion for the real estate industry exemplifies what it means to live out these core values in our offices and at our communities day in and day out. Each new day is a learning experience at Kushner, whether it is the knowledge we bring, gain, or share during our journey together. Our team members are set up to aim beyond, achieve the utmost success, and for endless possibilities for growth. Come Grow With Us!

JOB SUMMARY

This position is responsible to lead one or more construction projects and for the management of the overall planning, scheduling, code compliance, cost tracking, safety, and completion of these projects. The Superintendent is responsible for directing and mentoring subcontractors and other on-site field staff. The position requires business management acumen and must demonstrate strong leadership, organizational and time management skills, as well as have strong communication and team building skills.

WORK HOURS:

Weekdays 7 am to 5 pm; Saturdays 7 am- 1pm, as required.

RESPONSIBILITIES:

• Assure the required permits and approvals from jurisdictional agencies are secured, posted, and renewed as required prior to starting work.
• Develop, update, modify (as required) and maintain the project schedule including a master schedule, 60-day look ahead schedules for their assigned trades, and two-week look ahead schedules for their assigned trades.
• Understand and be familiar with the date by which all materials must arrive on the job and convey that information to the project management team for preparation of the contract items lists and shop drawing schedules.
• Coordinate scheduling of subcontractors, vendors, and inspectors to complete each project on time.
• Communicate with and support each subcontractor to execute their job duties effectively and efficiently.
• Monitor work and materials to ensure quality control standards are met at various stages of the project.
• Perform inspections or schedule inspectors to meet the varying safety and compliance regulations of each job location.
• Prepare the daily construction reports in a thorough and timely manner and maintain a written daily log of visitors, job actions performed, materials expended, and problems resolved on the job site.
• Assure daily job progress photographs are taken in ample quantity to accurately depict the progress of the work.
• Travel between multiple job sites and simultaneously manage work loads of individual projects
• Understand and ensure risk controls are properly established and maintained.
• Understand and uphold the site safety plan.
• Understand and uphold the site logistics plan.
• Assure the implementation and continuous maintenance of corporate safety program requirements in all of the day-to-day operations on the project.
• Prepare and attend the weekly subcontractor meetings. Assist in maintaining the minutes of these meetings, and ensure they are recorded and distributed.
• Prepare and manage weekly safety meetings, regular toolbox talks, and safety pre task meetings as required.
• Attend weekly meetings with the project team for purposes of updates on the status of the field work and communication of any issues requiring the input or action of others on the project team, and for notification to the project team of issues that may be of importance or interest to them.
• Establish and maintain a system of document control to assure work is being installed in accordance with the latest design documentation and approved shop drawings.
• Communicate any issues requiring additional information from designers and consultants in a timely fashion to the project manager for issuance of RFI’s.
• Assist in preparation of the monthly status report to be submitted to the lender.

REQUIREMENTS:

• Requires Engineering, Construction Management or related Bachelor’s degree, OR equivalent years of related experience.
• Requires 10+ years of experience in Stick-frame Multi-Family Residential Construction. Previous Sitework and Structured Garage Construction experience is preferred.
• Requires working knowledge of various construction disciplines, cost control, scheduling, safety regulations, engineering drawings and other documents required.
• Requires superior communication and interpersonal (tact, diplomacy, influence, etc.) skills essential both within the internal project team and externally with subcontractors, labor force, etc.
• Requires the ability to work with and have knowledge of the shop drawing submittal process.
• Requires the ability to read and comprehend building plans and specifications and able to comprehend and recognize safety standards and issues.
• Requires the ability to determine the priority of assignments based on critical deadlines.
• Requires the ability to resolves field-initiated questions.
• Requires understanding of construction contracts, retention, releases.
• Requires the ability to interact with all levels of personnel and customers.
• Must possess strengths in verbal and written communications; ability to adapt communications/presentations and deliver clear and concise reports and analysis to senior management.
• Requires ability to meet deadlines and work in a structured corporate environment.
• Requires the ability to be self-motivated and work independently with minimal supervision. Also requires high degree of ethics and integrity.
• Requires ability to maintain confidentiality of all company and customer information.

PHYSICAL DEMANDS:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. These demands are typically required when working onsite.

• Performance of the required duties will require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and negotiate work areas under construction.
• Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus.
• Performing this job requires use of hands to finger, handle, or feel objects, tools or controls, sit, talk and hear, stand, climb, balance, stoop, kneel, crouch, or crawl.
• Must occasionally lift and/or move up to 50 pounds.
• While performing the duties of this job, the employee regularly works on-site at the construction work site where the employee is exposed to moving mechanical parts; high precarious places; fumes or airborne particles; outside weather conditions and risk of electrical shock.
• Noise in these work environments is usually moderate to very loud.

Benefit Highlights:

• $2k relocation benefit available
• We match 50% of the first 6% of 401k contributions
• No wait period for Health Benefits & we contribute $1k to the HSA plan
• We have assistance for student loans as well as tuition reimbursement
• We have a great employee referral program
• We offer a housing discount in all our communities

EQUAL OPPORTUNITY EMPLOYER & EQUAL HOUSING PROVIDER

About Ideavillage

Ideavillage is a leading consumer products company behind nationally recognized brands including Copper Fit, MicroTouch, Finishing Touch, and Flawless. We design, develop, and launch innovative hardline items—including grooming tools, shavers, vibration/fitness products, and small battery‑powered devices—distributed across 60,000+ retail locations such as Walmart, Target, CVS, Walgreens, and Dick’s Sporting Goods.

We are expanding our engineering capabilities to support rapid product development with overseas manufacturing partners.

Position Overview

We are seeking a hands‑on Product Engineer with both electrical and mechanical engineering experience to lead the technical development of our growing portfolio of small appliances, grooming tools, vibration devices, and battery‑powered products.

This engineer will partner closely with overseas factories (primarily Asia) to ensure that every new product is engineered for performance, safety, manufacturability, and cost. The role spans concept validation through mass production.

Key Responsibilities

Product Development & Engineering

• Lead engineering efforts across the full product lifecycle: concept → prototypes → EVT/DVT/PVT → production
• Review and refine mechanical and electrical designs (motors, PCBA, wiring, charging systems, battery packs)
• Conduct technical tear‑downs, competitive benchmarking, and feasibility assessments
• Create and maintain technical documentation:
• Specifications
• Engineering drawings
• Test protocols
• Validation reports
• ECNs (Engineering Change Notices)

Factory & Supplier Engagement

• Collaborate daily with overseas factories (China, Vietnam, Thailand, etc.)
• Guide suppliers on design intent, DFM (Design for Manufacture), and tooling considerations
• Support pilot builds, pre‑production runs, and troubleshooting during scale‑up

Testing, Validation & Compliance

• Develop and execute testing protocols for safety, durability, vibration, noise, electrical performance, charging, and reliability
• Support compliance activities (UL, CE, FCC, CSA, Intertek, etc.)
• Perform root cause analysis (RCCA) on failures and implement corrective actions

Cross‑Functional Collaboration

• Work closely with Product Development, QA, Supply Chain, and Leadership
• Communicate technical risks, design changes, timelines, and validation status

Required Qualifications

• Bachelor’s degree in Electrical Engineering, Mechanical Engineering, or related discipline
• 3–5+ years engineering experience in consumer products, small appliances, personal care devices, electronics, or similar
• Strong hands‑on engineering background in both mechanical & electrical systems
• Experience with offshore manufacturing and ODM/OEM development
• Familiarity with regulatory and safety compliance (UL, CE, FCC, etc.)
• Skilled in root cause analysis and corrective action methodologies
• Strong communication skills and ability to produce clear technical documentation

Preferred / Bonus Skills

• Experience with:
• Motors and vibration systems
• Lithium‑ion batteries, charging circuits
• Shavers/grooming tools or similar electromechanical devices
• Proficiency with test equipment: oscilloscopes, multimeters, power supplies, electronic loads, spectrum analyzers
• CAD experience (SolidWorks or similar) a plus
• Mandarin/Cantonese conversation skills a plus (not required)

Travel

• Domestic and international travel: 3–5 times/year for factory visits, pilot builds, and product validations.

Onsite Monday-Friday

Salary starts at $150/year, commensurate with experience

Position Summary

The Lead Manufacturing Engineer is responsible for leading the design, development, and implementation of manufacturing processes, equipment, and systems that support high-quality, cost-effective production. This role partners closely with Product Development, Operations, Quality, and Supply Chain teams to ensure engineering solutions are seamlessly integrated into the manufacturing environment and aligned with business objectives.

Key Responsibilities

• Lead, mentor, and manage the Manufacturing Engineering team to support production goals in close collaboration with Operations.
• Develop and execute manufacturing strategies that improve efficiency, quality, throughput, and cost performance.
• Drive continuous improvement initiatives, including Lean Manufacturing, Six Sigma, and automation projects.
• Oversee the selection, installation, validation, and ongoing support of manufacturing equipment, tooling, and processes.
• Partner with R&D and Product Design teams to ensure products are optimized for manufacturability and assembly (DFM/DFA).
• Establish, track, and report key performance indicators (KPIs) such as OEE, yield, downtime, and scrap.
• Ensure compliance with all safety, quality, and regulatory requirements, including ISO 9001 standards.
• Develop and manage departmental budgets, capital expenditure plans, and engineering project timelines.
• Lead cross-functional projects and change initiatives to support operational excellence and scalability.

Qualifications

• Bachelor’s degree in Mechanical, Manufacturing, or Industrial Engineering.
• 7+ years of experience in manufacturing or industrial engineering within a manufacturing environment.
• Proven people management and project management experience.
• Working knowledge of Lean Manufacturing and Six Sigma methodologies.
• Hands-on experience with molding processes; rubber and plastic molding experience strongly preferred.
• Strong understanding of ISO 9001 and regulatory compliance requirements.
• Demonstrated ability to plan, prioritize, and execute multiple initiatives.
• Excellent communication and leadership skills with the ability to influence across functions.
• Proven track record of leading change and driving continuous improvement initiatives.
• Bilingual Spanish highly preferred

CONSTRUCTION MANAGER

Overview

The Construction Manager plays a pivotal role in overseeing day-to-day construction activities, ensuring compliance with released-for-construction documents, and coordinating all work impacting existing AirTrain operations. This role demands a hands-on leader who can balance technical expertise, particularly in electrical systems, with stakeholder coordination to ensure safety, quality, and on-time delivery.

The Construction Manager will be full-time, on-site at the project site from NTP (Construction) until First Passenger Service, and part-time thereafter until Final Acceptance and closeout.

Qualifications

• Education: Bachelor’s degree in engineering, architecture, construction management, or related field (Electrical Engineering strongly preferred).
• Experience:
• Minimum 15 years of construction management experience.
• At least one major transit, rail, or airport design-build project with a capital value ≥ $100M.
• Strong electrical experience: medium voltage power distribution systems, gas insulated switchgear (GIS), and PSE&G interface.
• Licenses/Certifications: Professional engineering or architectural license, or relevant construction certification, preferred.
• Other: Familiarity with PANYNJ projects and ability to pass background/badging requirements at EWR Airport.
• Light rail and/or people mover systems including electrical experience / power distribution systems. Some experience working for the actual contractor (not just owner side consulting) is preferred.

Responsibilities

• Manage scope, schedule, budget, safety, and quality of major rail/transit projects.
• Coordinate engineering and inspection services; maintain strong client and subcontractor relationships.
• Oversee all work impacting AirTrain operations, ensuring direct coordination with the Existing AirTrain Operator.
• Lead constructability reviews, change order negotiations, and independent cost estimates.
• Review schedules, proposals, invoices, requisitions, and purchase orders.
• Manage contractor access/protection requests and ensure compliance with safety regulations.
• Act as the owner’s representative in project meetings, presentations, and stakeholder coordination.
• Provide oversight on electrical systems integration (MV distribution, GIS, utility interface).
• Lead project teams, ensuring smooth execution and resolution of claims and disputes.

Minimum Requirements

• 15+ years relevant CM experience.
• Proven record on large, complex, lump-sum projects.
• Strong background in electrical power systems for transit/rail.
• Excellent communication and negotiation skills.
• Ability to work independently and proactively manage field conditions.
• Must be able to commute to EWR Airport.

If you meet these requirements and are ready for a challenging and rewarding role, we invite you to apply. Be part of a dynamic team shaping the future of transportation and construction.

Our benefits include

Medical, Dental, and Vision Insurance

Comprehensive health coverage to ensure employees and their families receive quality healthcare protection.

401(k) Retirement Plan

Competitive retirement savings program with up to 4% company matching, helping employees build long-term financial stability.

Flexible Work Schedule

Empowering employees with the ability to balance work and personal life through adaptable working hours and potential remote work options.

Additional Insurance Benefits

Life insurance to provide financial protection for employees' loved ones

Pet insurance to support employees' furry family members

Paid Time Off

Flexible time off to promote work-life balance and employee wellness

• Pursuing opportunities at institutions such as Naval Postgraduate School (NPS) or Navy War College (NWC)
• Completing Joint Professional Military Education (JPME) at one of the various service colleges