Engineering Structures Elsevier Jobs in None, CA

This position will be open until filled

To perform professional and technical engineering work in an assigned area such as plan and development review, contract administration and design; and to provide technical staff assistance to higher level engineering staff.

Position Snapshot/A Day in the Life:

This Associate Engineer position will be within the Traffic Division of the Public Works/Engineering Department. With a team of 11 (7 of whom are primarily responsible for signal operations and maintenance), we are responsible for overseeing the City's transportation system, including supporting Capital Improvements Projects, Land Development projects, Street Maintenance, Planning, and others.

Under the direction of a Senior Engineer or City Traffic Engineer, you will primarily be responsible for reviewing private development and capital improvement project related traffic studies, identifying impacts and deficiencies, and determining the most appropriate improvements and design features needed. Other day-to-day duties will also involve reviewing and preparing signing/striping plans and traffic control plans, investigating and responding to concerns from the general public, and participating in long-range planning activities. You may also be asked to help work on special projects and grant pursuits, preparing staff reports, participating in interagency coordination efforts, preparing RFP's/RFQ's, reviewing and processing proposals/contracts/traffic plans, and conducting various meetings.

Distinguishing Characteristics: This is the journey level class within the Engineering series. Employees within this class are distinguished from the Assistant Civil Engineer by the performance of the full range of duties as assigned. Employees at this level receive only occasional instruction or assistance as new or unusual situations arise and are fully aware of the operating procedures and policies within the work unit. Positions in this class are flexibly staffed and may be filled by advancement from the Assistant level.

Supervision Received and Exercised: Receives direction from higher level engineering staff and may exercise technical supervision over less experienced staff within the work unit and technical or functional supervision over staff within the Department.

The incumbent must have the ability to:

• Review and check residential and commercial building plans or plans related to structures such as streets, sidewalks, gutters and other off-site construction; check plans for conformance with regulations regarding line, grade, size, elevation and location of structures; check calculations
• Maintain records of all plans and contract documents.
• Prepare progress reports on projects under construction; maintain records of changes and field notes.
• Investigate field problems affecting property owners, contractors and maintenance operations.
• Coordinate assigned activities with consultants, engineers, developers, contractors, other city departments and divisions, and with outside agencies.
• Develop plans, specifications and other contract documents.
• Provide technical and professional engineering support services relative to assigned areas of responsibility.
• Prepare special engineering studies and reports; perform special assignments on engineering problems as necessary.
• Plan, prepare and design a variety of engineering projects such as roads, bridges, structures and hydraulics.
• Calculate the quantity, quality and cost of materials used for various projects.
• Review engineering calculations of other engineers or engineering technicians.
• Prepare plans and specifications, maps, deeds and legal descriptions.
• Review plans for traffic signals, traffic signing, and traffic striping for conformance with City policies and State and Federal requirements.
• Plan, prepare, and design a variety of engineering projects, such as traffic signals, traffic striping, and traffic signing.
• Review all permits involving work in public streets; review any and all traffic control plans required due to work in streets.
• Prepare traffic control plans and requirements.
• Communicate clearly and concisely, both orally and in writing.
• Establish and maintain cooperative working relationships with those contacted in the course of work.
• Perform and other tasks or functions that may be deemed necessary to the daily operations of the employer.
  
  

THE ABOVE LIST OF ESSENTIAL FUNCTIONS IS NOT EXHAUSTIVE AND MAY BE SUPPLEMENTED AS NECESSARY BY THE EMPLOYER.

WORKING CONDITIONS:In the performance of daily activities, this position requires prolonged sitting, standing, walking, reaching, twisting, turning, kneeling, and bending; the ability to push, pull, drag and/or lift up to 25 pounds; normal manual dexterity and hand/eye coordination; repetitive hand and wrist movement using a computer keyboard and mouse; corrected vision to normal range; acute hearing; written and oral communication; use of standard office equipment such as computers, telephones, copiers, calculators and facsimiles; frequent contact with other staff and the public; may be exposed to severe weather conditions such as high wind, rain, and other outside conditions.

A combination of experience and training that would provide the required knowledge and abilities is qualifying. The incumbent must have the knowledge of:

• Principles and practices of civil engineering.
• Methods, materials and techniques used in the construction of public works projects.
• Modern developments, current literature and sources of information regarding engineering.
• Principles of advanced mathematics and their application to engineering work.
• Applicable laws and regulatory codes in assigned area of responsibility.

The ideal candidate will have a strong technical background in preparing and reviewing transportation analysis for a range of project scales and being able to interpret the practical implications of the analysis results. They would be familiar with VMT, the current industry trends related to its implementation, and be able to assist the team in managing and updating our Traffic Impact Guidelines. They'll have excellent skills in using Excel and be comfortable working within it to create reliable and flexible tools for day-to-day analysis needs. The Traffic division and the City pursue significant grants and special projects that allow us to grow our infrastructure and capabilities, as well as to implement the best practices in the industry, the ideal candidate would be someone who is knowledgeable about the current trends in the Transportation engineering and planning fields and be able to lead grant pursuit efforts and independently manage such projects along with coordination with stakeholders of competing interests.

Experience: One (1) to two (2) years of increasingly responsible experience in civil engineering.

Preferred Qualifications

• At least two (2) years of experience preparing and reviewing transportation impact analyses for a range of project scales and being able to interpret the practical implications of the analysis results.
• Familiarity with VMT, the current industry trends related to its implementation, and have experience managing and/or updating Traffic Impact Guidelines.
• Advanced proficiency in Microsoft Excel, including building tools for transportation data analysis.
• Experience managing transportation projects and coordinating with internal and external stakeholders with competing interests.
• Experience presenting at public meetings and responding to questions/feedback from elected or appointed officials.
• Traffic Engineering license.

Education: Equivalent to a Bachelor's degree from an accredited college or university with major coursework in civil engineering or a closely related field. Some additional years of experience and specialized training may substitute for some of the educational requirements.

License or Certificate: Possession of, and continuously throughout employment, a valid CA Class "C" Driver's License.

Successful candidates will be required to complete an annual Statement of Economic Interest Form (700 Form) and bi-annual ethics training pursuant to AB 1234.

The City of Fontana has a flexible benefits plan. This plan allows for employees to select benefits based upon their individual needs. Full-time and Classified Part-time employees are eligible for benefits.

Please to view our excellent employee benefit options.

• 
  
  
• High School graduate or equivalent
  
  
• Some college
  
  
• Trade school graduate or Apprenticeship
  
  
• Associate's degree in related field
  
  
• Bachelor's degree in related field
  
  
• Bachelor's degree or higher in non-related field
  
  
• Equivalent to Bachelor's degree in related field
  
  
• Master's degree or higher in related field
  
  
• None of the above
  
  

• 
  
  
• Yes
  
  
• No
  
  

• 
  
  
• Yes
  
  
• No
  
  

Required Question

Job Title: Mechanical Engineer – Product Validation / DVP

Location: Sunnyvale, CA

Role Overview

We are seeking an experienced Mechanical Engineer to lead the Design Verification Plan (DVP) and validation activities for complex product systems. The role involves managing and executing mechanical, environmental, and electrical validation testing while working closely with internal teams and external test houses.

The ideal candidate will have strong hands-on prototyping and fixture design experience and the ability to independently drive validation programs in a fast-paced engineering environment.

Key Responsibilities

• Lead the Design Verification Plan (DVP) for product validation and testing.
• Plan and execute structural testing including vibration, shock, and impact tests.
• Conduct environmental testing such as temperature, humidity, ingress protection, and solar load validation.
• Coordinate testing activities with external test labs and test houses.
• Design and build test fixtures, jigs, and setups for validation and reliability testing.
• Perform hands-on prototype builds and mechanical test setups.
• Analyze test results and perform root cause analysis for product failures.
• Ensure validation coverage across the entire product system including electrical and mechanical components.
• Collaborate with cross-functional teams to support product development and validation timelines.
• Work independently to drive testing programs in a fast-paced engineering environment.

Required Qualifications

• Bachelor’s degree in Mechanical Engineering or related field.
• 5+ years of experience in product validation, testing, or reliability engineering.
• Strong experience developing and managing Design Verification Plans (DVP).
• Hands-on experience with structural testing (vibration, shock, impact).
• Experience with environmental testing (temperature, humidity, ingress, solar load).
• Experience designing test fixtures and jigs for validation testing.
• Ability to perform root cause analysis for product failures.
• Strong understanding of mechanical systems and product-level validation.

Preferred Skills

• Experience working with external test houses and certification labs.
• Background in hardware product development environments.
• Ability to work independently and manage multiple validation tasks.

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

The mechanical team is a small group of highly motivated people designing, testing, and flying advanced mechanical systems. We enjoy cradle-to-grave hardware ownership and hands-on build, test, and integration of our designs. As a Sr. Mechanical Engineer at Reliable Robotics, you will be an influential part of the Mechanical Engineering team helping to drive engineering methods and product quality. The hardware focus is on high reliability safety critical mechanisms and structures, with significant cross-functional development with the Systems, Avionics, GNC, Software, Manufacturing, and Flight Test teams. The position will be located at our facility in Mountain View, California, reporting to the Mechanical Engineering Manager.

Responsibilities

You will design, analyze, build, test, and fly a system of actuators, mechanisms, and structural modifications to enable remote piloted aircraft. Own your hardware from initial conception through flight test and certification...this is cradle-to-grave engineering with hands-on build, test, and integration. Lead cross-functional trades and drive performance and design decisions to closure. You will bring a sense of humility, and be ready to both learn and teach.

Basic Success Criteria

• BS in mechanical or aerospace engineering, or equivalent experience

• 5+ years professional experience developing mechanical systems

• Mastery of at least one of the following areas: Design, Analysis, Manufacturing, Test, or Certification

• Demonstrated successful project ownership

Preferred Criteria

• Demonstrated understanding of structural analysis and failure modes of mechanical systems

• Ability to assess and prioritize mechanical architectures for safety and reliability

• Previous experience with aircraft or other safety-critical mechanical systems

• Experience developing engineering infrastructure such as CAD systems, configuration management, PLM, ERP, and MRP systems

• Design for manufacturability and volume production

• Eagerness and ability to mentor junior engineers

• Proactive problem solver

• Excellent written and verbal communication skills

Must be willing to travel up to 10% of the time.

The estimated salary range for this position is $180,000 to $260,000/annual salary + cash and stock option awards + benefits. At Reliable Robotics, we strive to provide competitive and rewarding compensation based on experience and expertise, as well as market conditions, location, and pay equity.

In addition to base compensation, Reliable Robotics offers stock options, employee medical, 401k contribution, great co-workers and a casual work environment.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $180K - $260K

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

Our Mission is to develop best in industry technologies that align product capabilities to the needs of our customer. We will empower our people to leverage design commonality and innovation, balancing risk and rigor, to achieve predictable and affordable solutions. We are looking for candidates willing to collaborate, innovate, and team with our engineers to generate and utilize today’s cutting-edge technology.

This position is an onsite role, located in Tucson, AZ.

What You Will Do:

• Responsible for Printed Circuit Board (PCB) designs from conception to manufacturing

• Creation of the PCB, Circuit Card Assembly (CCA), and Schematic drawings for suppliers

• Schematic Capture, Component Placement, Routing of Traces, Gerber/ODB++ file creation

• Utilize software such as Siemens: Xpedition Enterprise and DownStream Technologies: BluePrint-PCB

• Design layouts include Rigid, Flex, and Rigid-Flex assemblies

• Work designs to include full designs, re-spins, drawing updates, change notices, copper changes, and process improvement projects within and outside own discipline

• Daily interface with various engineering levels along with different engineering disciplines including, but not limited to Electrical, Mechanical, Components, Test, and Producibility Engineering disciplines to ensure that the overall design requirements are captured, keeping cost, cycle time, and producibility in mind

Qualifications You Must Have:

• Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 5 years of prior relevant experience to include any combination of the following:

  • Experience with PCB manufacturing or CCA manufacturing principles that affect circuitry and component layout with RF specific layout techniques

  • Experience with the electrical design process including RF layout

  • Experience with laying out Rigid, Flex, or Rigid-Flex boards

  • Experience with multi-layer board design

Qualifications We Prefer:

• Working knowledge of Analog, Digital including DDR, specific experience with RF, Power, and mixed technology, including multi-layer designs with High Density Interconnect (HDI) technology

• Technical PCB design skills using the Siemens design toolset including, but not limited to the Xpedition Layout tool suite with working knowledge of schematic capture, placement, routing, use of the auto-router, constraint manager, and library tools, and use of BluePrint to create complex PCB and CCA drawings, Altium is not used, but transfers over well to the Siemens toolset

• Export manufacturing data in both Gerber and ODB++ formats

• Use of Valor NPI, Design for Manufacturing rule sets, other Design Rule Checking software

• Able to understand and interpret drawings as they relate to PCB’s and CCA’s

• Familiarity with IPC 6012 & IPC 6013

• Working knowledge of military and commercial design standards, GD&T techniques, and overall producibility considerations related to electronic packaging

• Knowledge of RF circuitry and key care abouts when it come to laying out the board along with filter knowledge

• Working knowledge of operating system concepts and implementations, network services as related to Microsoft Windows suites

• Willingness to work extended hours (nights and/or weekends) as required to complete assigned tasking

• Active Secret DoD security clearance
  
   

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

This position offers relocation based on candidate eligibility.

Learn More & Apply Now!

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:

#LI-CV1

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Mechanical Engineer – Aerospace Thermal Management Systems (Integration & Packaging)

Location: Onsite – Irvine CA

Industry: Aerospace & Defense

Duration: 6 months and extendable

Role Overview

We are seeking two highly skilled Mechanical Engineers with experience in the Aerospace & Defense sector to support the development and integration of advanced thermal management subsystems used across military and commercial platforms globally.

This role focuses on mechanical subsystem development from a packaging and integration perspective, including enclosure design and integration of electronic and fluid control components such as pumps, compressors, fans, and valves. The ideal candidate has hands-on experience developing aerospace-grade subsystems within defined volume and interface constraints, ensuring high reliability, environmental robustness, and compliance with industry standards.

These roles will support programs progressing from Preliminary Design Review (PDR) toward Critical Design Review (CDR) and will involve reuse and adaptation of existing product architectures.

Key Responsibilities

• Design and develop mechanical enclosures for aerospace electronic and control subsystems such as thermal management systems and related subsystems
• Package and integrate COTS and custom components into customer-defined volume constraints by integrating components including pumps, compressors, fans, valves, and control electronics
• Develop detailed CAD models, assemblies, and manufacturing drawings (SolidWorks preferred)
• Conduct tolerance analysis, GD&T, stack-up analysis, and design for manufacturability (DFM)
• Support prototype builds, integration activities, testing, and validation
• Implement design considerations to satisfy and qualify the environmental requirements (shock, vibration, temperature, humidity, EMI/EMC interface considerations) per MIL standards.
• Collaborate with electrical, controls, thermal, structural, and systems engineering teams
• Participate in root cause analysis and design refinement
• Ensure compliance with aerospace and defense standards and documentation practices

Required Qualifications

• Bachelor’s degree in mechanical engineering or equivalent.
• 5+ years of experience in Aerospace & Defense mechanical subsystem development
• U.S. Citizen (No Dual Citizenship)
• Strong mechanical packaging and integration experience
• Experience designing enclosures housing electronics and fluid/mechanical components
• Exposure to thermal management systems (ECS, vapor cycle, or liquid cooling preferred but not mandatory)
• Working knowledge of rotating machinery components (fans, compressors, pumps)
• Proficiency in CAD tools (SolidWorks preferred; strong experience in other platforms acceptable)
• Experience with GD&T and tolerance analysis
• Familiarity with aerospace environmental standards (MIL-STD preferred)
• Experience supporting qualification and validation testing
• Strong understanding of materials selection for aerospace applications
• Ability to work in cross-functional engineering teams

Preferred Qualifications

• Experience packaging turbomachinery components within constrained aerospace envelopes
• Exposure to controls systems integration
• Knowledge of vibration isolation and shock mitigation techniques
• Experience supporting PDR/CDR processes
• Familiarity with configuration management and aerospace documentation rigor
• Exposure to FMEA, reliability analysis, and lifecycle support

Business Overview

KINESSO is the technology-driven performance marketing agency providing actionable growth for both our agency partners and clients. We turn 'action' into 'outcome' for our clients, leveraging our unique capabilities in optimization, analytics, AI, and experimentation. KINESSO has brought together the collective power of what was formerly Matterkind, Reprise, P3, and Kinesso under one collective entity that will serve as the most powerful delivery engine in the industry. We have extensive offerings spanning across performance marketing and data and technology. Fueled by a deep understanding of consumer behavior, we offer an end-to-end engine of planning and optimization while also delivering on data-driven strategy for social platforms, actionable growth in e-commerce, and creating curated marketplaces specific to each client's function and needs. The company has more than 6,000 employees operating in more than 60 countries. Learn more at Summary

We are seeking a Staff Software Engineer to spearhead the design and development of a next-generation AI Chat Application that will serve as an enterprise-wide assistant. This application will support a diverse range of organizational functions-including HR, Finance, Business Strategy, Ad Tech, and MarTech-empowering employees with intelligent, context-aware AI capabilities to streamline daily work.

As the Staff Software Engineer, you will guide the technical direction, mentor engineers, and partner with cross-functional teams to deliver a scalable, secure, and high-performing platform.

• 
  
• Lead Architecture & Development: Define and implement the architecture for an AI-driven chat platform leveraging Python, GCP, and AI services.
  
• Team Leadership: Mentor and guide a team of engineers, driving technical excellence, collaboration, and delivery.
  
• LLM Integration: Build and optimize solutions with LLM foundational models to support natural language understanding, contextual reasoning, and multi-domain workflows.
  
• Partner with Product Owners: Collaborate closely with product owners to assess technical feasibility, translate business needs into actionable engineering requirements, and ensure alignment with overall product strategy.
  
• Scalability & Reliability: Ensure the system is designed with enterprise-grade security, scalability, and compliance in mind.
  
• Innovation: Explore and adopt emerging practices in prompt engineering, multi-agent coordination (MCP/LLM agents), and applied AI to continuously evolve the platform.
  

• 
  
• 12+ years of software engineering experience building production-grade applications.
  
• 7+ years of experience with Java (Python experience strongly preferred).
  
• 3+ years of experience leading or managing engineering teams.
  
• Strong grasp of object-oriented programming, data structures, algorithms, and design patterns.
  
• Experience designing and building scalable APIs (REST, GraphQL, gRPC) and modular, extensible architectures.
  
• Hands-on experience with relational and NoSQL databases (e.g., MSSQL, PostgreSQL, DynamoDB).
  
• Familiarity with messaging and event-driven platforms like Kafka, Temporal for real-time systems.
  
• Strong expertise in GCP and integrating AI services with LLM foundational models.
  
• Experience with AI-powered developer tools (e.g., GitHub Copilot, Claude) to improve productivity and code quality.
  
• Strong troubleshooting, communication, and documentation skills, with a bias for secure, observable, and maintainable solutions.
  
• Comfortable working in Agile/Scrum environments with cross-functional teams.
  

• 
  
• Experience with context engineering and fine-tuning AI/LLM outputs.
  
• Familiarity with Model Context Protocol (MCP) for LLM agent orchestration.
  
• Knowledge of LLM agent frameworks for building multi-step, reasoning-driven AI systems.
  
• Experience in enterprise-grade security and compliance frameworks.
  

We offer a Total Rewards package that includes medical and dental coverage, 401(k) plans, flex spending, life insurance, disability, employee discount program, employee stock purchase program and paid family benefits to support you and your family. The salary range for this position is posted below. Where an employee or prospective employee is paid within this range will depend on, among other factors, actual ranges for current/former employees in the subject position, market considerations, budgetary considerations, tenure and standing with the Company (applicable to current employees), as well as the employee's/applicant's skill set, level of experience, and qualifications.

It is the policy of our company to provide equal employment opportunities to all employees and applicants for employment without regard to race, color, ethnicity, gender, age, religion, creed, national origin, sexual orientation, gender identity, marital status, citizenship, genetic information, veteran status, disability, or any other basis prohibited by applicable federal, state, or local law.

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

The employer will make reasonable accommodations in compliance with the American with Disabilities Act of 1990. The job description will be reviewed periodically as duties and responsibilities change with business necessity. Essential and other job functions are subject to modification. Reasonable accommodations may be provided to enable individuals with disabilities to perform the essential functions.

For applicants to jobs in the United States: In compliance with the current Americans with Disabilities Act and state and local laws, if you have a disability and would like to request an accommodation to apply for a position with our company, please email .

MatriScope Engineering Laboratories, Inc. (MatriScope) is a leader in providing professional services in the disciplines of Geotechnical and Environmental Engineering, Materials Testing, and Special Inspection Services. Over the past 20 years, MatriScope has built a strong reputation throughout Northern and Central California for providing exceptional service through a proactive project management approach, innovative practices and a commitment to maintaining its traditional values. MatriScope is headquartered in Sacramento, CA with additional offices in the Bay Area.

MatriScope has many long-term assignments, including prevailing wage projects, for the right candidates who have a proven track-record, strong work-ethic, and desire to participate as a team player. MatriScope offers competitive salary and benefit package.

POSITION OVERVIEW:

We are seeking Construction Inspectors that have the drive and integrity to work with clients and vendors. Previous inspection experience is needed in this role.

PRIMARY POSITION RESPONSIBILITIES:

Perform as an entry to lead inspector on various projects responsible for the inspection and documentation of construction in the areas of building code compliance, concrete, pre-stress concrete, shotcrete, masonry, steel, fireproofing, waterproofing, and roofing. Ability to properly interpret construction documents and prepare well-written and concise reports capturing all necessary elements is required.

• Must be able to properly follow directions, perform in a responsible manner with minimal oversight.
• Provide daily reports of observation and test results
• Monitor work procedures for compliance with project specifications
• Interact with client representative (supervisors, foremen, project managers, engineers, etc.) at project sites
• Perform analysis or calculations to check accuracy, applicability and reasonableness of testing data

REQUIREMENTS:

• Entry or senior level Special Inspector with current certifications by the International Code Council, American Welding Society, and American Concrete Institute.
• One (1) year of Special Inspector field experience.
• Ability to read and comprehend basic plans and specifications.
• Strong written and verbal communication skills and the ability to work with a team.
• Reliability – must be able to arrive at designated project sites prior to scheduled times
• Ability to prepare report s and documentation.
• Proficient computer skills required.
• Ability and willingness to travel and work at construction sites.
• Ability to lift up to 50 pounds
• Ability to walk on uneven ground and work in variable outside conditions.
• Must be able to work various shifts depending upon construction schedules
• Must have a satisfactory driving record in accordance with the Company's driving (MVR) policy.
• Comply with the Company’s auto insurance policy and must have a valid CA drive license.

CERTIFICATIONS NEEDED (Must Have 2 or More Certification):

• ICC Pre-Stressed Concrete
• ICC Reinforced Concrete
• ICC Masonry
• ICC Structural Steel & Welding
• ICC Soils
• AWS CWI
• ASNT UT / MT Level II
• ACI Grade I

PROJECT LOCATIONS:

• San Francisco / Peninsula
• San Jose & Surrounding Areas
• Livermore
• Sacramento

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As an Avionics Mechanical Engineer at Reliable Robotics, you will be a part of the Vehicle Design and Integration team and will report to the Vehicle Design and Integration Manager. This team is a small group of highly motivated people designing, testing, and flying advanced mechanical systems. The harness engineer is a very cross-functional role at the convergence of the avionics, mechanical, integration, and production teams, with significant hands-on work designing, building, integrating, and testing our harnesses, enclosures, and mounting hardware; expect to broaden your design and application experience. This position will be located at our facility in Mountain View, California.

Responsibilities

In your role as Avionics Mechanical Engineer you will work with the avionics, mechanical, and integration teams to define the hardware interfaces, design the detailed harnesses including definition of the harness routing, design and test enclosures for environmental protection, and design the structural mounts for securing the hardware in the airplane. You'll have the opportunity to design, install, and test your hardware on a remotely operated aircraft, and you'll be an instrumental part of how our hardware teams come together on the airplane.

Basic Success Criteria

• BS in Mechanical Engineering, Electrical Engineering, or equivalent industry experience

• 2+ years experience in mechanical or avionics hardware design

• Ability to route harnessing (both in CAD and physically in the airplane) in a strategic manner

• Experience working with connectors, backshells, EMI shielding, and cable/wire protection methods

• Experience designing and analyzing structural mounts

• A love of spatial packaging

• Be logical, inquisitive, and eager to both teach and learn

Preferred Criteria

• 4+ years experience in harness design and avionics packaging

• Experience performing design trades for and detail design of aerospace flight harnesses

• Experience with NX routing and Capital Harness Designer

• Experience designing avionics enclosures

• Experience working on certification-path aviation development projects

• Experience testing hardware to DO-160 requirements

The position will be located at our facility in Mountain View, California. Must be willing to travel up to 10% of the time.

The estimated salary range for this position is $118,000 to $170,000/annual salary + cash and stock option awards + benefits. At Reliable Robotics, we strive to provide competitive and rewarding compensation based on experience and expertise, as well as market conditions, location, and pay equity.

In addition to base compensation, Reliable Robotics offers stock options, employee medical, 401k contribution, great co-workers and a casual work environment.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $118K - $170K