Engineering Structures Elsevier Jobs in Cooper City, FL

The Broward County Board of County Commissioners is seeking qualified candidates for Engineering Unit Supervisor (Highway Construction and Engineering Division).

THIS JOB ANNOUNCEMENT WILL REMAIN OPEN UNTIL SUFFICIENT NUMBER OF APPLICATIONS ARE RECEIVED AND MAY CLOSE AT ANY TIME.



This position supports professionals responsible for managing capital and mobility advancement projects for Broward County's Highway Construction and Engineering Division. The ideal candidate will have experience coordinating with multiple entities, including municipalities, state agencies, and local authorities. Work involves the review, planning, and coordination of the design and construction of County capital and mobility advancement projects, including schedules, budgets, and staff assignments.

General Description
Performs advanced professional and supervisory engineering work in the design and review of a wide variety of engineering and environmental projects.
Works under administrative supervision, developing and implementing programs within organizational policies and reports major activities to executive level administrators through conferences and reports.
Minimum Education and Experience RequirementsRequires a Bachelor's degree from an accredited college or university with major coursework in civil engineering.

Requires six (6) years progressively responsible experience in professional engineering work related to roadway design and construction or closely related field, including two (2) years of supervisory experience.
Special Certifications and LicensesPossess and maintain Professional Engineer License in State of Florida for duration of assignment.

Preferences* Master's Degree in Civil Engineering, Public Administration or closely related field* Certified in the use of one (1) or more of the following engineering programs (i.e. ICPR, ASAD, HY-8, HEC-RAS, HEC-HMS, Synchro, HCS, IMSA), or similar
* Construction Training Qualification Program (CTQP) Certifications (Asphalt, Concrete, Earthwork, QC Manager, etc.)
* Professional Traffic Operations Engineer, Professional Surveyor & Mapper, General Contractor License, or similar
* Project Management Professional and/or Certified Public Manager
* Advanced Work Zone Traffic Control Training Certification
* At least ten (10) years of experience in design and construction of roadway/traffic projects
* At least five (5) years of experience in one (1) of the following specialized fields of engineering: Traffic Operations, Structures, Drainage, Geotechnical, Construction Management
* At least three (3) years of experience with MicroStation OpenRoads Designer (ORD)
* At least two (2) years of experience in governmental contract and procurement
* At least two (2) years of experience in the preparation of agenda items and/or resolutions

SCOPE OF WORK

The functions listed below are those that represent the majority of the time spent working in this class. Management may assign additional functions related to the type of work of the job as necessary.

Schedules, assigns, and supervises engineering design projects; directs and coordinates field surveys, plan design, preparation and review, cost estimate development, and specifications preparation; participates in the development and design and review of major and complex projects.

Supervises and participates in the analysis and review of engineering studies and designs prepared by professional consultants; prepares recommendations for the consideration of professional and administrative superiors and committees.

Supervises the preparation of right-of-way and construction plans for major thoroughfares; conducts studies and prepares reports on proposed locations for future major thoroughfares; maintains liaison with appropriate outside agencies concerning projects under consideration for construction.

Supervises and participates in the activities of construction engineers, inspectors, and materials technicians in the investigation and construction of water and sewer mains, roadways, structures, and related public work projects; prepares general and special specifications for contract construction; supervises the maintenance and analysis of payment estimates and records.

Oversees and performs the technical review of remedial action plans; oversees and administers environmental licensing programs.

Conducts special engineering studies and projects relating to technical and administrative aspects of the public works function; coordinates the utilization of computer technology as related to the engineering function.

Conducts long-range studies involving other departments, agencies, and organizations; prepares reports and recommendations; seals and signs engineering plans, drawings, and documents.

Performs related work as assigned.

Physical Demands

Physical demands refer to the requirements for physical exertion and coordination of limb and body movement.

Performs sedentary work that involves walking or standing some of the time and involves exerting up to 10 pounds of force on a regular and recurring basis or sustained keyboard operations.

Unavoidable hazards refer to the job conditions that may lead to injury or health hazards even though precautions have been taken.

Involves routine and frequent exposure to traffic; moving machinery.

Competencies

• Manages Complexity

• Decision Quality

• Balances Stakeholders

• Directs Work

• Plans and Aligns

• Optimizes Work Processes

• Ensures Accountability

• Builds Effective Teams

• Communicates Effectively

• Situational Adaptability

• Collaborates: Building partnerships and working collaboratively with others to meet shared objectives.
• Customer focus: Building strong customer relationships and delivering customer-centric solutions.
• Instills trust: Gaining the confidence and trust of others through honesty, integrity, and authenticity.
• Values differences: Recognizing the value that different perspectives and cultures bring to an organization.

Serve as the asset manager and contact person for internal, borrower, and third-party requests/concerns for assigned loans.

Proactive oversight and timely resolution of a portfolio of specially serviced CLO loans and other distressed debt assets.

Report to senior management updates on assigned loans.

Analyze property operating performance through review of operating statements, rent rolls and leases.

Evaluate and abstract loan documents.

Communicate effectively with internal and external parties including borrowers, legal counsel, property managers, other lenders, servicers, and other Rialto departments.

Negotiate complex transactions.

Perform research on various real estate markets throughout the U.S. and communicate with brokers in these markets.

Comprehensive analysis and understanding of loan collateral dynamics, value determination, and resolution alternatives.

Strong organizational skills with the ability to manage multiple priorities.

Prepare valuation and cash flow analysis on projected loan resolutions based on Borrower proposals including DCF / IRR / NPV scenarios for various strategies.

Underwrite potential new investment opportunities in CMBS, equity recapitalizations, asset/portfolio acquisitions, and mezzanine/preferred equity.

Prepare weekly, monthly, and quarterly reports for the executive team and outside parties.

Underwrite performing loan requests for reserve disbursements, lease approvals, loan extensions and other requests as needed and ensure all requests are handled in compliance with the terms of the related Loan Documents.

Bachelor's Degree from an accredited university is required, preferably in a related course of study like Commercial Real Estate or Finance.

Minimum of 5 years' experience in the workout of non-performing commercial real estate loans or debt asset management.

Advance knowledge of commercial real estate, fixed income, and general financial concepts.

Knowledge of bank, conventional, agency, and/or CLO origination and servicing is recommended.

Ability to underwrite commercial real estate and/or residential acquisition, development, and construction transactions, as well as possess excellent verbal and written communication skills.

High level proficiency working with Microsoft Excel, Word, and PowerPoint, in addition to a basic competency working with Argus and CRE Market Data Providers.

Strong work ethic and attention to detail.

Ability to manage time effectively while handling a variety of projects.

Prior credit/real estate underwriting experience.

The ideal candidate would have a strong understanding of loan documents or demonstrate the aptitude to quickly become familiar with loan documents.

Strong written and verbal communication skills.

Ability to multi-task and collaborate within a team setting.

Must be team-oriented and work well in a collaborative environment.

While performing the duties of this job, the Associate is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop. The Associate must occasionally lift and/or move up to 25 pounds. Evening or weekend work may be necessary to meet deadlines.

This description outlines the basic tasks and requirements for the position noted. It is not a comprehensive listing of all job duties.

Rialto Capital is committed to the principles of Equal Employment Opportunity. Our policy is to provide equal employment opportunity to all applicants and Associates without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity or expression, national origin, age (40+), disability, veteran status, genetic information (including family medical history), or any other legally protected status.

Our company uses E-Verify to confirm the employment eligibility of all newly hired employees.

To learn more about E-Verify, including your rights and responsibilities please visit: .

Doka USA is proud to be Certified™ by Great Place to Work®! We are committed to fostering a supportive work environment where all of our team members can thrive. As one of the world’s leading companies for developing, manufacturing, and distributing formwork solutions for the construction sector, Doka employs more than 9,000 people in over 58 countries and is part of the family-owned Umdasch Group.

We Make It Work.

As a Senior Project Engineer at Doka USA, you will be responsible for overseeing the planning, execution, and management of formwork projects from conception to completion. Leveraging your expertise in structural engineering, project management, and leadership, you will collaborate with cross-functional teams to deliver high-quality formwork solutions that meet project objectives, adhere to safety standards, and exceed client expectations. This will be an in-person role based out of our Davie, FL branch and will report into our Engineering Manager.

Responsibilities:

• Lead the planning and execution of formwork projects, including scheduling, resource allocation, and budget management, to ensure timely and successful project delivery.
• Conduct comprehensive site assessments and feasibility studies to determine project requirements, constraints, and risks.
• Develop detailed project plans, schedules, and budgets, and monitor progress against key milestones and deliverables.
• Coordinate with internal teams, subcontractors, and suppliers to procure materials, equipment, and resources required for project execution.
• Provide technical expertise and guidance to project teams, resolving complex engineering challenges and ensuring compliance with design specifications and regulatory requirements.
• Conduct regular site inspections and quality audits to assess workmanship, safety practices, and adherence to project plans and specifications.
• Manage client communications, addressing inquiries, concerns, and change requests in a proactive and professional manner.
• Prepare and review engineering drawings, calculations, and documentation, ensuring accuracy, completeness, and compliance with industry standards and regulations.
  
  

• Bachelor's degree in Civil Engineering, Structural Engineering, or a related field.
• Professional Engineer (PE) certification is required with the ability to stamp within the state of Texas.
• Proven experience in project engineering and management within the construction industry, with a focus on formwork-related projects.
• Strong knowledge of structural engineering principles, construction methodologies, and building codes.
• Proficiency in project management software, CAD software, and other relevant tools.
• Excellent leadership, communication, and interpersonal skills, with the ability to collaborate effectively with diverse stakeholders.
• Strong problem-solving and decision-making abilities, with a focus on delivering innovative and cost-effective solutions.
• Prior experience in formwork design, scaffolding, or related fields is preferred.
  
  

Doka offers terrific career opportunities, competitive compensation, comprehensive benefits including medical, dental, vision, Flexible Spending Account, company paid life insurance, supplemental voluntary term life insurance, 401k retirement plan (Roth and Non-Roth), short-term disability, AFLAC policies, paid time off (sick/personal, vacation, floating holiday and company paid holidays) and an exciting opportunity to join as a member of Doka's team.

If working with some of the most impressive construction projects in the US and joining an industry leader excites you, please submit your resume by clicking below. Visit us on-line at for additional information on Doka USA, Ltd.

Doka USA, Ltd. is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

If you are interested and have a strong competitive drive, positive attitude, a desire to learn and grow from your experiences, then this is your opportunity to make an immediate difference.

Please submit your resume and apply now.

External candidates must be authorized to work for any employer in the USA.

JOB TITLE: Electrical Install Assembler (Early Career) - Free Housing Support ($5K Relocation Bonus)
Location: On-site in North Charleston, SC
PAY RATE: $26-31/hour

We are a national aerospace and defense staffing agency seeking highly qualified candidates for a position with a top-tier client.

Job Details:

• 
  
• 
  

  Job Type: Contract (12 months with potential for extension)

  
  
  
• 
  

  Industry: Aerospace / Defense / Aviation

  
  
  
• 
  

  Benefits: Medical, dental, and vision (Cigna)

  
  
  
• 
  

  Perks: Bonus potential + Priority access via Tier 1 supplier

  
  
  
• 
  

  Openings Nationwide: Thousands of opportunities across the U.S.

  
  
  

Qualifying Questions:

• 
  
• 
  

  Are you a U.S. person as defined under ITAR regulations?

  
  
  
• 
  

  Do you meet the educational and experience requirements for this role?

  
  
  
• 
  

  Can you commute to the job location or relocate if necessary?

  
  
  

Summary:

• 
  
• 
  

  Route wire harnesses to supports per blueprint instructions and 787 specifications.

  
  
  
• 
  

  Build connectors, splice wires, crimp, and terminate wiring.

  
  
  
• 
  

  Install connectors to receptacles and electronic components.

  
  
  
• 
  

  Perform repairs and rework processes to incorporate authorized engineering changes.

  
  
  
• 
  

  Conduct fiber optic cleaning, inspection, light loss testing, routing, and installation.

  
  
  
• 
  

  Perform bond and ground operations, including CRNs, jumpers, ground stud installation, and resistance testing.

  
  
  

Requirements:

• 
  
• 
  

  High School Diploma or GED required; vocational school or Associate degree preferred.

  
  
  
• 
  

  6+ months of experience using software applications such as internet navigation, email, Microsoft Office, or other specialized programs.

  
  
  
• 
  

  6+ months of experience following detailed work instructions and interpreting blueprints, drawings, or specifications in English.

  
  
  
• 
  

  6+ months of experience in advanced manufacturing, technical, or mechanical environments using hand, power, or pneumatic tools.

  
  
  
• 
  

  6+ months of experience with structural parts fabrication and assembly processes.

  
  
  
• 
  

  Ability to perform tasks requiring bending, kneeling, crouching, standing, walking, climbing/balancing, reaching overhead, twisting, and head/neck rotation.

  
  
  
• 
  

  Ability to lift and carry up to 35 lbs.

  
  
  
• 
  

  Ability to work safely with high-hazard chemicals.

  
  
  
• 
  

  Must be able to work variable shifts (1st, 2nd, or 3rd) based on business need.

  
  
  
• 
  

  Must be a U.S. Citizen (as defined by ITAR).

  
  
  

About Us:

The Structures Company is a premier national aerospace and defense staffing agency specializing in contract, contract-to-hire, and direct hire placements. We deliver expert workforce solutions across engineering, IT, production, maintenance, and support roles.

As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries.

Eligibility Requirements:

Must be a U.S. Citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3) to comply with ITAR regulations.

Keywords: aerospace, aviation, engineering, maintenance, aircraft design, defense

Take your career to new heightsapply today!

A Senior Test Engineer job in Miramar, FL 33027 is currently available through Belcan at one of our key aerospace clients. This is a four‑month contract role with the potential to convert to a direct hire. To be considered for this role the candidate will need to have 3-5 years of relevant experience.

Description

The Test Design Engineer is responsible for creating and performing test automation activities consistent with the test lead and test development goals/objectives. This role requires knowledge/experience with automated test software, manufacturing test environment and the ability to interpret test requirements, implement requirement-based test methodologies and trouble shoot & debug test and product issues. Experience with FAA Part 145 in an MRO environment highly desired.

Job Duties:

Specific duties will include:

SW/HW debug, troubleshoot, upgrade and maintain product automated test equipment.

Requirements Analysis/Review for test-ability

Test procedure development, implementation, execution and failure root cause analysis.

Test planning and preparation.

Assess System performance against requirements

Develop code in Veristand, Teststand, LabVIEW to implement test GUIs, drivers and test requirements.

Perform verification and validation testing on developed Automated Test Equipment (ATE).

Perform sub-system testing from bench level CCA functional testing to system level burn in testing against an ATP/QTP.

Develop and refine system and board level test cases and procedures.

Trouble shoot subsystem and system level failures to root cause.

Design test fixtures & cables to enable testing.

Perform verification and validation testing on developed Automated Test Equipment (ATE).

Bench test CCAs and test electronic sub-assemblies and rack based test systems (instruments, cables and interfaces).

Trouble shoot subsystem and system level failures to root cause.

Gather, configure and use appropriate test equipment to perform task - Power supplies, DVM, Oscilloscope, electronic loads, custom cables, etc.

Interpret test requirements and electrical test results.

Read electrical schematics.

Test planning, preparation & execution

Required Qualifications:

3 to 5 years of experience

Strong interpersonal skills

Strong analytical skills

B.S. or M.S. in Electrical Engineering, Electrical Engineering Technology, or related discipline desired

Will consider equivalent years of relevant experience in lieu of a formal degree

Experience working with or developing Automated Test Equipment (ATE).

Experience in hardware and test equipment troubleshooting experience.

Knowledge of test automation (HIL) using National Instruments Labview, TestStand and Veristand

Can operate independently

Desired Skills:

Excellent verbal and written communication skills.

Experience working independently and in a collaborative environment

Ability to react to project adjustments and alterations promptly and efficiently

Ability to effectively prioritize and execute tasks in a high-pressure environment

Familiarity with electronic components and common electronic test equipment.

Experienced using lab test equipment, power supplies, DVM, Oscilloscope, electronic loads

Ability to interpret test requirements and electrical test results.

Ability to conduct detailed failure analysis and develop and implement root cause corrective actions.

Experience with GIT, Tortoise SVN, or equivalent software configuration management tools

Previous experience with CAN, UDS, RS232, RS422 & 1553 communication protocols.

Previous experience with programming languages such as C, C++ & C#.

Previous experience with Visual Studio.

Compensation:

This position is offering an salary rate of $52.88 - $62.50/hr, however, Belcan considers several factors when extending an offer, including but not limited to education, experience, geographic location, and discipline. Benefits offered may include health care, dental, vision, life insurance; 401(k); education assistance; paid time off including PTO, holidays, and any other paid leave required by law.

Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, color, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws.

This is a highly responsible position that supports the health, safety and welfare of Tribal members and the public. The incumbent in this position is responsible for managing the regulation and inspection of building construction, electrical, mechanical, and plumbing installations and directing compliance and enforcement of all related federal, state and local ordinances of the Seminole Tribe of Florida (STOF). Work involves technical review of all types of construction drawings, plans, and specifications to ensure compliance with applicable codes and ordinances. The incumbent provides general oversight, management, and leadership to building inspectors, plans examiners, and permit technicians as required and is responsible for the issuance of all permits and Certificates of Occupancy in accordance with the Florida Building Code and Tribal administrative policy. The person is also responsible for the administration of the Tribe’s elevator and commercial structure annual inspections programs.

The individual works closely with the Director of the Tribal Inspector’s Department to support all departmental programs and initiatives, including but not limited to the development of the departmental budget and strategic plans, development of building inspections processes and programs, evaluation and improvement of service delivery systems, and administration of the Tribe’s Unsafe Structures Ordinance Program. The incumbent may attend Tribal Council meetings or other community meetings and works with all necessary stakeholders to resolve complaints, address concerns, or solve problems as needed. Bachelor’s degree in Engineering, Building Construction, Civil Engineering, Architecture or related field is required. Master’s degree is preferred. A minimum of ten (10) years of experience as an Architect, Engineer, Building Inspector, Build Code Administrator, or Construction Superintendent with at least five (5) years being in a supervisory capacity is required; or, any equivalent combination of education, experience and training will be considered.

Prior experience with EnerGov software system is preferred. Possession and maintenance of a Building Code Administrator certification by the Florida Building Code Administrators and Inspector’s Board is required. Possession of a valid Florida Driver’s License is required. Must have excellent organizational and interpersonal skills including the ability to clearly communicate complex ideas in English both orally and in writing. Must be able to respond and commit to full duty operations during Hurricane or other emergency events. Demonstrate proficiency with Microsoft software programs. Demonstrate excellent organizational and interpersonal skills including English written and oral communication skills are required. Ability to travel and work a flexible schedule including evenings, weekends and holidays.

Job Description:

• Manufacturing Engineer role, you will serve as a key execution-focused engineering resource supporting a landing gear Maintenance, Repair, and Overhaul (MRO) facility.
• The primary emphasis of this position is the execution of large capital expenditure (CAPEX) projects that enhance manufacturing capability, capacity, safety, and productivity.
• You will work closely with operations, quality, facilities, and supply chain teams to deliver equipment installations, process improvements, and infrastructure upgrades that are safe, compliant, and production ready.
• This role also supports repair and overhaul engineering responsibilities that are inherently tied to manufacturing engineering, including development of master manufacturing plans, onboarding of new programs, and direct shop-floor support within a regulated aerospace environment.

Responsibilities:

• Lead and execute large CAPEX projects within a landing gear MRO environment, including equipment selection, layout development, installation, commissioning, and production handover
• Translate business and operational requirements into executable manufacturing solutions that improve safety, quality, cost, delivery, and capacity
• Partner with operations, facilities, EH&S, quality, and supply chain to ensure successful project execution and compliance with regulatory and internal requirements
• Develop, author, and maintain master manufacturing plans (master routers), work instructions, and Bills of Material that define standardized, repeatable repair and overhaul execution
• Support onboarding of new programs into the facility, including creation of master production plans and preparation for introduction into the shop
• Provide hands-on engineering support to the shop floor, including troubleshooting manufacturing processes, tooling, equipment, and test systems involving mechanical, electrical, hydraulic, or control related issues
• Conduct equipment acceptance, process validation, and capability assessments to ensure processes and assets are production-ready
• Review engineering specifications, repair orders, Service Bulletins, Airworthiness Directives, and related technical data to ensure compliance with approved repair and overhaul methods
• Interpret engineering drawings and facilitate creation of new drawings or correction of errors identified during repair and overhaul operations
• Review drawings and technical documentation prepared by other engineering staff
• Liaise with Quality Control, Materials, Production, and other departments to resolve shopfloor technical issues efficiently
• Ensure engineering documentation, drawings, routers, and records remain current and that engineering-related production issues and resolutions are properly documented
• Provide and support training for shop-floor personnel related to new equipment, tooling, processes, and program introductions
• Drive root cause analysis and corrective actions for manufacturing, equipment, or process issues
• Support continuous improvement initiatives focused on throughput, yield, turnaround time, safety, and operational stability

Requirements:

• Develop supplemental documentation required to support shop-floor execution, including procedures, job aids, and supporting technical documentation
• Identify, specify, quote, and procure required tooling and equipment in support of CAPEX projects and new program introductions, including PO issuance, installation, safety reviews, and operator training
• Develop and implement manufacturing processes, tooling concepts, and workflows that support landing gear repair and overhaul operations
• Experience executing capital projects, including equipment installation, commissioning, and production handover
• Hands-on experience troubleshooting manufacturing or test equipment, including mechanical, electrical, hydraulic, or control systems
• Aerospace or aviation manufacturing experience, particularly within a landing gear or MRO environment
• Experience interpreting and reviewing engineering drawings and technical documentation
• CAD modeling experience (e.g., Siemens NX, CATIA V5, or equivalent)

Education:

• Bachelors

The Broward County Board of County Commissioners is seeking qualified candidates for Construction Project Management Supervisor.

THIS JOB ANNOUNCEMENT WILL REMAIN OPEN UNTIL SUFFICIENT NUMBER OF APPLICATIONS ARE RECEIVED AND MAY CLOSE AT ANYTIME.

The Construction Project Management Supervisor with the Seaport Facilities Maintenance Division is responsible for performing advanced professional and administrative work in managing maintenance projects for the Port Everglades Department. Specifically:

• Oversee water/sewer, stormwater design, construction, and other infrastructure to include regulatory compliance.
• Review as-built drawings, architectural, engineering plans, and specifications to ensure compliance with federal, state, and local building codes.
• Monitor and manage maintenance and capital projects
• Manages and supervises contractors and consultants in their performance and adherence to contract specifications; negotiates construction and consultant contracts, amendments, change orders, and work authorizations.
• Review plans and specifications of projects; proposals, engineering calculations, pay applications, permit packet and invoices.
• Reviews progress of maintenance projects and resolves construction-related issues; negotiates fees and scope with consultants. Signs and seals permit applications and drawings.
• Monitor and escort contractors and consultant throughout the Port to perform their services.
• Keep track of work orders in AIM to update notes, status, and pictures as required.
• Reviews bids for conformance to maintenance & construction specifications; administers and manages consultant and contractor contracts for adherence and performance; assists in the bidding process and contract packet development.
• Holds periodic meetings with contractors and consultants to review work progress and manages all aspects of the project.
• Reviews and approves proposals, invoices and payment requests from contractors and consultants; prepares vendor evaluations at the conclusion of projects. Monitor and oversee contractors goal assignment with OESBD (small business).
• Assists in the preparation of new fiscal year budget requests; carries out special assignments requested by the Division Assistant Director and performs related work as assigned.
• Coordinates with internal supervisor, Port Maintenance Manager, stakeholders, including Port users and County Agencies, i.e., County Attorney, Purchasing Division, Finance, Small Business, Risk Management, Operations, Security, BSO, Fire Rescue, Health Department, Water and Wastewater Department, other county agencies, local agencies, state, and federal agencies.
• Performs other related duties as required.
  
  

Works under administrative supervision, developing and implementing programs within organizational policies and reports major activities to executive level administrators through conferences and reports.

Engineering License OR Architectural License OR NCIDQ (Space Planning Only) based upon area of assignment.

The functions listed below are those that represent the majority of the time spent working in this class. Management may assign additional functions related to the type of work of the job as necessary.

Manages and monitors construction contractors and consultants; develops, administers and negotiates construction and consultant contracts, master plan studies, amendments, change orders, and work authorizations.

Coordinates stakeholders including user and County agencies: County Attorneys, Purchasing, Small Business Division, Building Departments; FDOT and other regulatory agencies.

Supervises other project managers and engineering technicians; performs reviews and oversight of projects managed by subordinates; reviews plans and specifications, engineering calculations, pay applications, invoices, and Florida Building Code.

Reviews project progress and resolves design and construction related issues; negotiates fees and scope with consultants; designs projects, signs and seals construction documents, permit applications and reports.

Assists with contract developments and bidding process; reviews bids for conformance to construction documents; administers and manages consultant and contractor contracts for adherence and performance.

Establishes a Quality Control/Quality Assurance (QC/QA) Project Program and procedures for the Project Management Section and the Division to standardize the project management process, improve quality and performance.

Carries out special assignments requested by Division Director; meets with subordinates to review the status of their assigned projects; prepares job performance evaluations for subordinates.

Conducts meetings with consultants and contractors to review progress of work and manage all aspects of the project; reviews and approves invoices and payment requests from consultants and contractors; assists in the preparation of new fiscal year budget requests.

Performs related work as assigned.

Physical Demands

Physical demands refer to the requirements for physical exertion and coordination of limb and body movement.

Performs light work that involves walking or standing most of the time and involves exerting up to 20 pounds of force on a regular and recurring basis, or skill, adeptness and speed in the use of fingers, hands or limbs on repetitive operation of electronic office equipment or tools within moderate tolerances or limits of accuracy.

Unavoidable hazards refer to the job conditions that may lead to injury or health hazards even though precautions have been taken.

None.

Competencies

• Financial Acumen

• Manages Complexity

• Decision Quality

• Balances Stakeholders

• Plans and Aligns

• Ensures Accountability

• Drives Results

• Develops Talent

• Communicates Effectively

• Situational Adaptability

• Collaborates: Building partnerships and working collaboratively with others to meet shared objectives.
• Customer focus: Building strong customer relationships and delivering customer-centric solutions.
• Instills trust: Gaining the confidence and trust of others through honesty, integrity, and authenticity.
• Values differences: Recognizing the value that different perspectives and cultures bring to an organization.

The Fullstack Lead Developer reports to the Senior Manager of Software Engineering and is responsible for leading the design, development, and delivery of complex software solutions across the product portfolio.

This role requires deep hands-on expertise in NextJS, React, Java, and database technologies, along with strong leadership capabilities. The ideal candidate brings extensive experience in fullstack architecture, DevOps practices, solution design, and performance optimization. This individual will lead engineering efforts from concept through production while mentoring developers and ensuring operational excellence.

Responsibilities:

· Lead end-to-end solution design and implementation from concept through production deployment.

· Architect and develop scalable, resilient, and high-performance applications.

· Provide technical leadership across frontend and backend development initiatives.

· Collaborate with Product teams to provide accurate effort estimation and planning.

· Ensure adherence to engineering standards, governance, and best practices.

· Coach and mentor engineers, fostering a culture of innovation and continuous improvement.

· Conduct code reviews and enforce high standards for quality, security, and maintainability.

· Design and document technical solutions, architecture decisions, and engineering patterns.

· Evaluate and recommend modern technologies and best practices aligned with business goals.

· Lead troubleshooting efforts for complex production issues, including performance bottlenecks and system failures.

· Partner with QA teams to define and execute robust testing strategies, including unit, integration, and regression testing.

· Ensure solutions align with enterprise architecture and integration standards.

· Manage effort tracking and identify cost optimization opportunities.

Required Qualifications:

· Bachelor’s or Master’s degree in Computer Science, Engineering, Information Technology, Mathematics, or related field.

· 7+ years of experience in Software Engineering with strong fullstack expertise.

· Advanced proficiency in NextJS, React, Java, and database technologies (SQL, MySQL preferred, plus non-relational databases such as MongoDB).

· Strong understanding of software architecture, design patterns, and modern development frameworks.

· Experience designing and building scalable, high-availability systems.

· Proven ability to lead technical initiatives and mentor engineering teams.

· Strong knowledge of application testing strategies and DevOps practices.

· Experience working in large, cross-functional, globally distributed teams preferred.

· Excellent troubleshooting, analytical, and problem-solving skills.

· Strong written and verbal communication skills.

Preferred Experience:

· Experience leading fullstack architecture initiatives across complex enterprise environments.

· Exposure to CI/CD pipelines and cloud-based deployment models.

· Experience evaluating and implementing optimization tools and lifecycle models.

· Strong understanding of cost management and engineering effort tracking.

At Terumo we believe in the power of personal growth and will encourage you to get in the driver's seat - progressing in the direction you want to go by deepening your skills throughout your career. We want you to be bold, think outside the box, experiment, innovate and deliver what's next for quality healthcare. You will be part of a collaborative, respectful and resilient team of associates and leaders around the world, working together as partners to achieve more than you thought possible, providing real-world, impactful solutions for patients.

Join us and help shape wherever we go next!

Advancing healthcare with heart

Job Summary:

The Site Leader is responsible for setting the strategic direction and providing overall leadership for the Sunrise manufacturing site, ensuring operational excellence while supporting the organization’s broader business and growth objectives. This role leads the site leadership team and oversees manufacturing operations, manufacturing engineering, process development, sustaining engineering, and warehouse activities.

Through close partnership with functional leaders, the Site Leader ensures alignment and effective execution across key site functions, including quality, supply chain, finance, facilities, and human resources.

The Site Leader is accountable for delivering best-in-class operational performance while ensuring full compliance with all regulatory and corporate requirements. This role fosters a culture of continuous improvement, operational discipline, and talent development to position the Sunrise site as a high-performing, competitive manufacturing operation.

Job Details:

Strategic Leadership

• Establish and communicate the strategic vision for the Sunrise site aligned with divisional and corporate objectives.
• Build unity at the site and drive a culture reflecting our core values and financial discipline.
• Communicate effectively to the team and stakeholders based on facts and financials.
• Motivate the team on site to achieve a common goal to serving patients and meeting our strategic goals.

Operational Excellence

• Lead the development of a best-in class manufacturing organization utilizing modern manufacturing, engineering, and operational practices.
• Implement continuous improvement initiatives to enhance productivity, quality, service levels, and cost performance.
• Adopt automated tools to drive efficiency of operation and increase accuracy in inspection.
• Accelerate data collection and analysis to drive further improvement in operational efficiencies.

Cross-Functional Leadership

• Provide leadership and oversight for manufacturing and engineering while ensuring effective coordination with quality, supply chain, finance, facilities, and human resources.

Performance and Financial Management

• Develop site operating plans, key objectives, and budgets to guide and control operations.
• Monitor performance against goals and ensure achievement of production, cost, and financial targets.

Production and Delivery Execution

• Ensure production schedules and product shipments are executed on time, within budget, and in full compliance with quality and regulatory standards.

Talent Development and Organizational Leadership

• Build, develop, and lead a high-performing leadership team.
• Ensure effective recruitment, development, and succession planning to support long-term organizational capability.

Operational Planning and Forecasting

• Execute manufacturing strategies aligned with demand forecasts and business requirements.
• Analyze operational performance and implement corrective actions to ensure achievement of manufacturing and financial objectives.

Regulatory and Compliance Oversight

• Ensure full compliance with Terumo policies and procedures as well as all applicable FDA, ISO, GMP, and other regulatory requirements.

Capacity and Growth Planning

• Anticipate and plan for future capacity needs to support growth, product transfers, and potential mergers or acquisitions.
• Evaluate expansion opportunities, including facility expansion or new site build.

External and Regulatory Engagement

• Ensure site operations remain in full compliance with federal, state, and local regulatory authorities and maintain effective relationships with relevant agencies.

Additional Responsibilities

• Perform other duties consistent with the leadership and management of a large, regulated manufacturing site.

Position Requirements:

Knowledge, Skills, and Abilities (KSAs)

• Demonstrated leadership capability to set strategic direction, inspire teams, and deliver results through others.
• Strong interpersonal and influencing skills with the ability to coach, develop talent, and foster high-performing teams.
• Excellent verbal, written, listening, and presentation communication skills.
• Proven ability to lead organizational change, communicate effectively, and drive adoption of new processes or initiatives.
• Strong cross-functional collaboration skills with the ability to partner effectively across manufacturing, engineering, quality, supply chain, and commercial teams.
• Sound judgment and decision-making capability, including the ability to make timely decisions with incomplete information.
• Strong critical thinking, analytical, and problem-solving skills.
• Demonstrated project and operational leadership with the ability to prioritize initiatives and execute effectively.
• Ability to drive accountability and performance while creating a culture of urgency, ownership, and continuous improvement.
• Working knowledge of medical device regulatory and quality systems requirements, including FDA, GMP, ISO, and related standards.
• Financial acumen with the ability to manage budgets and drive cost-effective operational performance.
• Proficiency with standard business software including Microsoft Office (Word, Excel, PowerPoint, Outlook).

Background and Experience

• Bachelor’s degree in Engineering, Natural Sciences, or Business Administration required; advanced degree preferred, or equivalent combination of education and experience.
• Minimum 15 years of progressive experience in manufacturing, manufacturing engineering, or operations leadership required.
• Minimum 10 years of leadership experience managing manufacturing or engineering teams in a regulated environment.
• Experience within the medical device, pharmaceutical, or similarly regulated industry strongly preferred.
• Demonstrated experience leading multi-disciplinary teams across manufacturing, engineering, etc.
• Experience managing operational budgets and driving operational performance improvements.
• Proven track record of delivering results on schedule and within budget in a complex manufacturing environment.

Final compensation packages may be higher or lower than what is listed, and will ultimately depend on factors including relevant experience, internal equity, skillset, knowledge, geography, education, business needs and market demand. We provide competitive and comprehensive benefit options which include: annual bonus, paid vacation, paid holidays, health, dental and vision benefits, 401(k), with matching contributions, tax advantage savings accounts, legal plan, voluntary life and AD&D insurance, voluntary long-term disability, short term disability, critical illness and accident insurance, parental leave, personal leave, tuition reimbursement, travel assistance, and an employee assistance program. Salary range - $200,000 to 260,000