Engineering Structures Elsevier Jobs in Airmont, NY

The Rockland County Department of Highways, Drainage Division, is seeking a Director of the Drainage Agency. The work is specialized diverse, and complex in nature.

This is administrative and managerial work of a complex nature that involves responsibility for developing and implementing policies and procedures to implement safe, efficient and modern stream maintenance and drainage programs. The work is performed under the general direction of the Superintendent of Highways and in accordance with Federal and New York State applicable laws and regulations and Rockland County objectives and policies. Supervision is exercised over professional and technical employees. Develops policies and procedures with respect to drainage programs and makes recommendations to the Superintendent of Highways regarding same. Arranges for the engineering, construction, improvement, repair and maintenance of County streams, water courses, drainage courses, and tributaries and ensures that services are in compliance with policies and regulations. Oversees the administration of drainage-related capital projects, including but not limited to monitoring funding, supervising contract bid processes, ensuring compliance with regulations and project requirement. Responds to emergencies (e.g. severe flooding) by inspecting and monitoring flooding and related conditions, acting as liaison with County officials and first responders to exchange information and resolve problems, preparing reports regarding flood damage and related conditions in order to obtain New York State and Federal funding. Completes applications and prepares documents to secure New York State Department of Environmental Conservation (DEC) permits, as needed, regarding dam safety, streams, aquatic habitats, wetland programs, etc. Acts as liaison to a variety of governmental agencies and units of government, as needed, including but not limited to the Army Corp of Engineers, the New York State Department of Environmental Conservation, towns and village, etc. Approves plans, specifications and estimates for construction, maintenance and repair of stream watercourses and tributaries. Directs the control of trees, brush and weeds within the bounds of County streams. Plans and directs a program to inform residents about the programs and functions of the Drainage Agency. Oversees the Drainage Agency’s permit application process and ensures compliance with the Rockland County Stream Control Act as it applies to activities within areas under the jurisdiction of the Drainage Agency. Plans and directs a Stream Maintenance program, maintains records and makes reports. Acts for and in place of the Superintendent of Highways with respect to drainage matters, as needed. May provide legal opinions regarding Federal, New York State, and Rockland County laws that pertain to drainage matters. May inventory and purchase machinery, equipment and materials.

Thorough knowledge of New York State Department of Environmental Conservation requirements and regulations, thorough knowledge of general practices and regulations regarding stream maintenance and general construction procedures. Good knowledge of administrative procedures and techniques, especially as they pertain to a comprehensive modern stream maintenance and drainage programs, ability to plan, develop and implement general policies and procedures for a modern and efficient stream and drainage system, including stream maintenance and construction. Ability to establish and maintain cooperative relationships with others, including elected officials and Federal and New York representatives. Have the ability to understand and interpret laws and regulations that pertain to drainage-related matters. Ability to effectively communicate, both orally and in writing Also does related work as required.

Minimum Qualifications:

• A Bachelor’s degree or higher in Civil Engineering, Civil Engineering Technology, Environmental Engineering, or comparable curriculum or;
• A New York State license to practice law and
• Four (4) years of post-degree supervisory, administrative or management experience that substantially involved responsibility for drainage and/or environmental programs and projects (e.g., development of policies and procedures, supervision of staff, enforcement, providing legal opinions and/or litigating related matters, overseeing the implementation of programs and projects, etc.).

Other Requirements and Information:

• Must be a Resident of Rockland County.
• This is a competitive position in Civil Service and reachability on an eligible list following a civil service examination would be a requirement for permanent appointment.

Salary and Benefits:

Salary and benefits are competitive with the public sector market including but not limited to the following:

• $122,000.00 Annual Salary (as of January 1, 2026)
• 40 Hour work week
• Medical, Dental and Vision
• Time off including vacation, personal and holiday time
• New York State Pension eligibility
• Other benefits, including, but not limited to deferred compensation, tuition reimbursement, leadership and other professional development training

How to Apply:

Interested candidates should email a completed Rockland County employment application, to

Click here to access the online application.

Position open until filled.

R&D Scientist II – Materials / Polymer Focus (Lab-Based) - 626501

Location: Franklin Lakes, NJ (Onsite – 5 days/week)

Duration: 12-month contract (W2)

Pay Rate: ~$35.75 - $37.75/hr.

Overview

We are seeking a junior-level R&D Scientist II to join a Specimen Management R&D team, supporting the development of blood collection devices (e.g., tubes, needles, plastic components).

This role is highly lab-focused (≈50%+ hands-on testing) and ideal for candidates with a background in materials science, polymer chemistry, or chemical engineering who enjoy bench work and experimental testing.

Key Responsibilities

• Conduct material characterization and testing, including:
• FTIR, DSC, TGA, rheology, and mechanical testing
• Environmental Stress Cracking (ESC) and Thermal Cycle Analysis (TCA)
• Design and execute lab experiments and test protocols
• Perform root cause investigations related to material and product failures
• Support material selection, qualification, and vendor/material changes
• Prepare samples and prototypes for internal and external testing
• Document results and provide data-driven recommendations
• Assist with small-scale material assessments and innovation efforts
• Maintain lab equipment and follow Good Laboratory Practices (GLP)
• Collaborate with cross-functional teams (R&D, Manufacturing, Quality, etc.)
• Support testing involving human blood samples (training and PPE provided)

Required Qualifications

• Bachelor’s or Master’s degree in: Materials Science, Polymer Chemistry, Chemical Engineering, Mechanical Engineering, or related field
• 2+ years of laboratory experience (industry or academic)
• Hands-on experience with materials testing and characterization
• Strong interest in polymer/material science (non-metal/ceramic focus)
• Comfortable working in a lab-heavy, hands-on role
• Basic knowledge of statistical tools (Excel, Minitab, etc.)
• Ability to conduct independent research and literature reviews

Preferred Qualifications

• Polymers or plastic materials (especially for medical devices)
• Material formulation or modification
• ESC, TCA, or similar testing methods
• Exposure to analytical chemistry techniques
• Experience working with biological materials or blood samples
• Background in tissue engineering or DNA-related work (nice-to-have)

Work Environment & Expectations

• 50%+ lab-based work (testing, characterization, experimentation)
• Remaining time focused on analysis, reporting, and innovation projects
• Fully onsite role (no remote option)
• No travel required
• Dynamic, fast-paced R&D environment
• Opportunity for long-term growth

Interview Process

• Initial screening with Hiring Manager
• Follow-up panel interview with project team (virtual via Teams)

Ideal Candidate Profile

• Early-career scientist with a strong materials/polymer background
• Curious, hands-on, and eager to learn
• Comfortable working independently in a lab setting
• Interested in medical device R&D and material innovation

We are looking for a skilled Technical Project Manager to lead product development initiatives from initial concept through launch. This role serves as the central connector between engineering, design, and business teams—ensuring clarity, alignment, and smooth execution throughout the full development cycle.

Responsibilities

• Define what the product must deliver and ensure requirements are clearly communicated across technical and non-technical teams.
• Guide projects from early concept through final launch, ensuring products meet quality, performance, and timing expectations.
• Translate complex technical challenges into clear direction for cross-functional partners while supporting select hands-on technical activities when needed.
• Develop and maintain detailed project schedules, ensuring milestones stay on track with internal goals and retailer timelines.
• Facilitate strong communication and alignment across global teams, providing ongoing visibility into project status, risks, and decision points.
• Prepare and deliver project updates to senior stakeholders, including recommendations, trade-offs, and key risks.
• Collaborate with engineering and project teams to ensure solutions meet both technical feasibility and business needs.
• Work in a fast-paced environment that values flexibility, problem-solving, and cross-functional collaboration.

Qualifications

• 3+ years of experience in project management or engineering, ideally within consumer products, plastics, or hardware development.
• Proven success managing full product lifecycles—from concept through production and launch.
• Strong technical foundation with an understanding of engineering principles, manufacturing processes, and product constraints.
• Ability to clearly communicate complex technical information to diverse stakeholders.
• Proficiency in Microsoft Office; familiarity with CAD tools such as SolidWorks or CREO is a plus.
• Experience presenting to senior leadership; exposure to executive-level communication is beneficial.
• A proactive, hands-on approach with the ability to adapt quickly and work collaboratively across teams.

Salary Range (commensurate with experience)

$130,000 - $135,000 USD

• 
  
• Perform assembly-type functions using hand and power tools.
  
  
• Read and interpret mechanical drawings, blueprints, and work instructions.
  
  
• Operate press brake, fastener machine, and index machine as required.
  
  
• Install wiring, lights, and hardware assemblies.
  
  
• Operate forklifts, cranes, and other shop equipment.
  
  
• Conduct visual inspections and ensure compliance with quality standards.
  
  
• Train and oversee assemblers (Lead level).
  
  
• Coordinate workflow and safety (Lead level).
  
  
• Perform other related duties as assigned by the supervisor.
  
  
• Ability to use measuring devices accurately.
  
  
• Strong math aptitude, including fractions and decimals.
  
  
• Basic computer navigation and documentation skills.
  
  
• Strong attention to detail and organizational ability.
  
  
• Critical thinking and problem-solving ability.
  
  
• Commitment to following company safety and operational procedures.
  
  
• Ability to lead, train, and evaluate other employees in assembly techniques (Lead level).
  
  

• 
  
• Associate Level: 1-2 years of related mechanical assembly experience.
  
  
• Staff Level: 2-4 years of professional mechanical assembly or fabrication experience.
  
  
• Lead Level: 5+ years of progressive experience in mechanical assembly, including supervisory or lead responsibilities in a manufacturing or defense environment.
  
  
• High School Diploma or GED required.
  
  
• Technical or vocational training in Mechanical Engineering or Manufacturing preferred.
  
  
• Associate's Degree in Mechanical Engineering from an accredited institution is a plus.
  
  

About the Company

At MetroWall, we hold our values close to heart, with respect being the cornerstone of our interactions. We believe that fostering a respectful environment not only enhances collaboration but also drives innovation. Overcoming obstacles is part of our journey, and we view challenges as opportunities to grow and improve. By embracing these challenges, we consistently strive to exceed expectations, delivering exceptional results and setting new standards in our industry. Together, these values create a culture of excellence and continuous improvement. Alignment with these values is critical to the success of any employee at MetroWall.

About the Role

The Manufacturing Engineer acts as the bridge between Engineering and Production, owning all aspects of process definition, manufacturability, and continuous improvement for MetroWall’s glass partition, door, and framing systems.

RELOCATION ASSISTANCE NOT AVAILABLE.

Responsibilities

Process Design & Standardization:

• Develop, document, and maintain manufacturing processes for aluminum and door assembly operations
• Create Standard Operating Procedures (SOPs), setup sheets, visual work instructions, and tool/fixture lists
• Define operation sequences, routing steps, and cycle times in ERP (Epicor/Kinetic)
• Establish and maintain machine capability matrices, ensuring processes align with equipment limitations

Design for Manufacturability (DFM):

• Participate in NPI and R&D project reviews to ensure designs are manufacturable within MetroWall’s equipment and process constraints
• Collaborate with Product Design Engineers to optimize part geometry, tolerances, and hardware selection
• Approve manufacturability sign-offs prior to product release (NPI Phase Gate)

Process Improvement & Cost Reduction:

• Analyze production performance data to identify waste, bottlenecks, and rework causes
• Implement Kaizen and lean initiatives
• Lead trials to validate improved processes, new jigs, or revised toolpaths

Collaboration & Support:

• Work closely with Production Managers to ensure practical implementation of processes
• Support Production Engineers during complex custom projects or prototypes
• Serve as a technical escalation point for production issues

Document & Revision Control:

• Maintain all process documentation under version control (aligned with Engineering ECO system)
• Link controlled documents to Epicor Work Orders and routings
• Audit shop floor adherence to latest revision

Safety & Compliance:

• Ensure compliance with OSHA and internal safety standards
• Integrate safety instructions directly into work procedures

Qualifications:

• Bachelor’s degree in Mechanical, Industrial, or Manufacturing Engineering.
• 3+ years of manufacturing experience (preferably architectural aluminum/glass or similar fabrication).
• Hands-on understanding of CNC machining, cutting, drilling, and assembly operations.
• Familiarity with Epicor/Kinetic, AutoCAD/Inventor, and Lean manufacturing tools.
• Strong documentation and communication skills.
• Ability to work cross-functionally between Engineering and Production.
• Strong organizational abilities to manage multiple tasks and projects simultaneously. Skilled in identifying issues, analyzing options, and implementing effective solutions in a timely manner.
• Keen attention to detail with a commitment to producing high-quality work, ensuring accuracy and precision in all tasks.

Work Environment

• Office & Field

Additional Responsibilities:

• Work with all members of the MetroWall team to deliver a level of customer service that exceeds the expectations of our customers
• Assist sales team personnel in selecting solutions for clients
• Continuously improve existing/new internal processes and deliverables
• Obtain thorough understanding of MetroWall products and their capabilities in order to provide support to other teams/team members

With a passion for life

Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers.

Are you looking for an inspiring career? You just found it.

Job Overview

The Manager, Collagen Operations serves as the sole site leader for the Mahwah, NJ Collagen facility and carries full responsibility for all site personnel decisions, site performance, and operational escalations. This role ensures the safe, compliant, and efficient operation of the site while driving a strong culture of quality, engagement, and continuous improvement.

This position is accountable for the implementation of operational strategy as defined by the Getinge France (La Ciotat) leadership team. The Manager must ensure that all production activities adhere to U.S. regulatory protocols, including FDA, ISO, GMP, ESD, and Medical Device requirements, while also ensuring that all U.S. people practices (HR, safety, compliance, labor standards) are fully adopted and consistently upheld.

The Manager leads the site in achieving production, safety, quality, and delivery objectives while ensuring strong communication, alignment, and reporting back to the Getinge France entity.

Key Responsibilities

Site Leadership & Escalations

Serve as the highest-ranking leader on-site, responsible for daily operational oversight.

Act as the primary escalation point for all personnel, safety, compliance, and operational matters.

Maintain a proactive presence on the production floor; ensure alignment between site activities and La Ciotat leadership direction.

Lead all site-level communication, engagement efforts, and leadership routines.

Safety, Quality & Compliance

Serve as the site owner for safety, quality, and environmental compliance.

Ensure strict adherence to all U.S. regulatory requirements, including FDA, ISO, GMP, ESD, environmental, and medical device standards.

Ensure all U.S. people practices-including investigations, corrective action processes, documentation, training standards, and HR compliance-are consistently applied.

Guarantee timely and effective management of nonconformances, CAPAs, and deviations; lead site-level reviews and escalations.

Operations Management

Lead the execution of the annual production plan and ensure on-time delivery in alignment with customer needs and La Ciotat directives.

Oversee production scheduling, resource planning, inventory management, and staffing decisions.

Ensure production equipment, cleanroom environments, and facilities are properly maintained and audit-ready.

Manage manufacturing engineering and support functions to drive continuous improvement, cost savings, and process optimization.

Ensure documentation accuracy and compliance, including SOPs, controlled documents, training records, and batch documentation.

People Leadership

Full responsibility for all site personnel management, including hiring, onboarding, development, coaching, performance management, and employee relations.

Drive a culture of engagement, teamwork, and accountability consistent with Getinge values and U.S. people practices.

Set clear objectives, oversee workload planning, conduct performance reviews, and support career development.

Cross-Functional & Global Collaboration

Collaborate closely with the La Ciotat Production Director and France-based teams to ensure alignment on operational execution, reporting, and strategy.

Partner with U.S.-based HR, Quality, EHS, Engineering, and Supply Chain teams to ensure compliance and best practices across all site functions.

Coordinate validation, feasibility builds, technical projects, and operational readiness with sustaining engineering and global partners.

Essential Duties

Organize and manage site production resources to meet daily, weekly, and annual plans.

Anticipate operational needs and align staffing with forecasts.

Define short-term production plans compatible with demand and capacity.

Lead investigations into deviations, failures, or operational issues and implement corrective actions.

Oversee preventive and corrective maintenance and technical shutdowns.

Submit and manage investment requests to support operational goals.

Ensure all personnel comply with safety rules, gowning, cleanroom regulations, and quality protocols.

Maintain readiness for internal and external audits at all times.

Minimum Requirements

High school diploma required; advanced education preferred.

3-5 years of experience as a production manager in medical device or similarly regulated environment.

Experience in cleanroom or controlled environment operations preferred.

Demonstrated ability to lead teams and run a manufacturing site with a high level of autonomy.

Strong computer skills; SAP experience a plus.

Targeted salary range: $138,000- $145,000, depending upon experience and location +15% bonus target

#LI-LG1

About us

With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries.

Benefits at Getinge:

At Getinge, we offer a comprehensive benefits package, which includes:

• 
  
• Health, Dental, and Vision insurance benefits
  
• 401k plan with company match
  
• Paid Time Off
  
• Wellness initiative & Health Assistance Resources
  
• Life Insurance
  
• Short and Long Term Disability Benefits
  
• Health and Dependent Care Flexible Spending Accounts
  
• Commuter Benefits
  
• Parental and Caregiver Leave
  
• Tuition Reimbursement
  

Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law.Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.

This position is for the Overnight Shift 2am - 1030am Monday to Friday

Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio.  IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers.

Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business.

The Level A Fleet Mechanic/Technician is the top-tier technical expert in the shop, responsible for advanced diagnostics, complex repairs, and technical leadership across refuse trucks, heavy trucks/tractors, and support assets.  This role sets the standard for safety, quality, productivity, and training, and partners with maintenance leadership to drive up time and regulatory compliance across the fleet.

Advanced Diagnostics & Complex Repairs

• Lead diagnosis and resolution of complex, intermittent, or chronic issues involving:
• Engine performance and emissions/aftertreatment (DPF, DOC, SCR, sensors, dosing systems).
• CAN-bus and multiplex electrical systems, electronic control modules, and communication networks.
• Advanced hydraulics for refuse bodies, auto-load arms, high-pressure systems, and heavy truck power take-offs.
• Plan and execute major component work including major engine reparis, transmission and differential R&R, frame-off repairs, and complex hydraulic rebuilds.

Technical Leadership & Training

• Serve as the go-to technical resource for Level B and Level C technicians; provide on-the-job training, coaching, and quality checks.
• Assist in training on:
  • Diagnostic software and tools.
  • New equipment technology, safety systems, and telematics.
  • Company maintenance standards, PM strategies, and repair procedures.

Fleet Reliability, Compliance & Continuous Improvement

• Analyze repeat repairs, failure trends, and PM findings; recommend changes to PM intervals, inspection checklists, or parts specifications.
• Ensure all work complies with DOT, FMCSA, OSHA, BIC, DEP and environmental regulations, as well as state/local requirements in NY, NYC, NJ, and CT.
• Perform and sign off on the most critical inspections (e.g., PDI, PM and Annual inspections, accident damage assessments, major repair QC).

Operational & Customer Support

• Support complex road calls and on-site repairs on the road, at transfer stations, MRFs, or customer locations throughout the NYC tri-state area.
• Partner with Operations and Dispatch to minimize downtime, sequence repairs effectively, and prioritize critical units i.e. NYC dense-route refuse units, specialized collection assets.
• Provide clear feedback to leadership on equipment condition, replacement candidates, and chronic issues affecting uptime or safety.

Administrative & Leadership Duties (as assigned)

• Help plan daily shop workload and allocate jobs according to technician skill level.
• Assist in specifying parts, evaluating vendor options, and supporting warranty recovery efforts.
• Support audits, safety inspections, and external regulatory reviews as the technical representative for the shop.

• High school diploma or GED required; additional technical training strongly preferred.

• A minimum of 5 years of proven hands-on experience as a diesel mechanic as a diesel/heavy-equipment mechanic/technician, including advanced diagnostics and major component overhaul.
• CDL Class B or A with air brake endorsement required or strongly preferred due to frequent road tests and movement of collection vehicles on public roads.

• Demonstrated expert-level knowledge of:
  • Heavy truck and refuse systems.
  • Refuse hydraulic, electrical, and powertrain systems.
  • Diagnostic software, scan tools, and OEM service information.
• Proven track record of performing complex diagnostics and repairs independently.
• Must provide own professional-grade tools required for diagnostic and repair work.
• ASE Master Medium/Heavy Truck Technician or equivalent combination of ASE certifications (T series) and/or OEM advanced certifications preferred.
• Possession of a valid driver’s license is required.
• Experience in a lead or senior technician role in a refuse, municipal, or large private fleet environment preferred.
• Experience with CNG/LNG, hybrid, or EV drivetrains for heavy vehicles preferred.
• Strong communication skills and the ability to coach, influence, and drive standards across multiple shifts or locations preferred.

This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice.

Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Fuel Your Career with Us!

Are you a skilled Diesel Mechanic looking for your next opportunity? Join our team at Interstate Waste Services and put your expertise to work!

Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. 

Schedule:

Overnight Wednesday to Sunday 6pm to 5am.

Our Diesel Mechanics perform inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Performs preventive maintenance inspection (PMI); troubleshoots, repairs, and rebuilds major components on vehicles and equipment. Ensures accurate diagnosis and effective repair and/or replacement of component.

• Performs all work in accordance with established safety procedures. 
• Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting parts usage, and accounting for repair times.  
• Assists in the repair and adjustment of equipment.  
• Washes vehicles and equipment.  
• Conducts safety checks on vehicles.  
• Assists with service calls for breakdowns.  
• Perform other maintenance related work as required. 
• Maintain a clean, safe work area in compliance with Corporate / OSHA Standards. 

• 2+ years’ experience working as a heavy-duty Diesel Mechanic
• Hydraulics experience is highly preferred
• Engine and transmission maintenance and repairs
• Experience with diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, Peterbilt, and Paccar.
• Chassis component repairs and maintenance including air brakes system, suspension, drivetrain and steering components.
• Maintain and repair exhaust systems equipped with DPF systems.
• Maintain a clean, safe work area in compliance with Corporate / OSHA Standards.
• Assists with service calls for breakdowns
• Must be able to provide own tools.
• A valid driver’s license is required.Preform other duties as assigned.

IWS is committed to providing a world class workplace to all employees. Each eligible employee receives a competitive total compensation package including, hourly pay based on experience and paid overtime, Medical, Dental, Vision, Life Insurance and more. Our employees also receive Paid Vacation, Holidays, and Personal Days.

We believe in providing the training and development you need to grow your career with IWS. Many of our Supervisors, Managers, and other leadership staff, started their careers as Helpers, Drivers, or Dispatchers. IWS is proud to be an equal opportunity employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law.

Fuel Your Career with Us!

Are you a skilled Diesel Mechanic looking for your next opportunity? Join our team at Interstate Waste Services and put your expertise to work!

Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. 

Our Diesel Mechanics perform inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Performs preventive maintenance inspection (PMI); troubleshoots, repairs, and rebuilds major components on vehicles and equipment. Ensures accurate diagnosis and effective repair and/or replacement of component.

Requirements

• 2+ years’ experience working as a heavy-duty Diesel Mechanic
• Hydraulics experience is highly preferred
• Engine and transmission maintenance and repairs
• Experience with diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, Peterbilt, and Paccar.
• Chassis component repairs and maintenance including air brakes system, suspension, drivetrain and steering components.
• Maintain and repair exhaust systems equipped with DPF systems.
• Maintain a clean, safe work area in compliance with Corporate / OSHA Standards.
• Assists with service calls for breakdowns
• Must be able to provide own tools.
• A valid driver’s license is required.
• Preform other duties as assigned.

What We Offer?

• Competitive wage (based on experience) plus Time and a half for Overtime.
• Union Shop.
• Medical, dental, vision, life, short-term and long-term disability coverage.
• 401(k).
• Uniforms provided with laundry services.

IWS is committed to providing a world class workplace to all employees. Each eligible employee receives a competitive total compensation package including, hourly pay based on experience and paid overtime, Medical, Dental, Vision, Life Insurance and more. Our employees also receive Paid Vacation, Holidays, and Personal Days.

We believe in providing the training and development you need to grow your career with IWS. Many of our Supervisors, Managers, and other leadership staff, started their careers as Helpers, Drivers, or Dispatchers. IWS is proud to be an equal opportunity employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law.