Engineering Structures Elsevier Jobs No Experience Jobs in Hell, MI

• Bachelor’s degree in mechanical engineering
• Thorough knowledge of engineering design & development concepts of automotive BIW system .
• Experience in side body panel, Roof, Floor panel and other BIW components
• Very good proficiency in CATIA V5/V6
• Bachelor’s degree in Mechanical, Engineering.
• 3+ years of proven experience designing high-volume designs of BIW parts
• Development of outer skin panels (A-Surface) in collaboration with OEM Design Studio, Design Engineering, CAE, etc.
• Development of inner panels, reinforcements, brackets and other structural panel
• Ability to create and completion of Sheet metal parts e.g. brackets, Panels, etc
• Design of automotive component parts in CATIA V5. Experience in creating 3D designs and 2D drawings (e.g. CATIA V5 only)
• Strong communication skills, both verbal and written, and capability to drive 10 people offshore team
• Actively engage with Automotive OEM design engineers to collaborate on design projects for trading off cost, mass, joining methods, formability, and performance.
• Interpret CAE simulation results and integrate recommendations into product design
• Strong working knowledge of Design for Manufacturing, including formability with GD&T and dimensional engineering.

Responsibilities

• Bachelor of Science in Mechanical Engineering with a minimum of 3 years of experience in automotive seating system and subsystem design and development
• Thorough knowledge of engineering design & development concepts of automotive Seating system
• Very good proficiency in CATIA V5/V6. Prepare and execute design release in the 3DExperience PLM system. Experience in creating 3D designs and 2D drawings (e.g. CATIA V5 only)
• Experience in design of Seat and seat components e.g. Cushion Frame, Back frame, Headrest, seat plastic and recliners and track
• Relevant experience in Master Sections, Vehicle Integration, Vehicle packaging, Concept creation, assembly processes of various Seat parts.
• Knowledge and understanding of Tooling and manufacturing processes
• Prepare and maintain engineering release and change documentation Lead design FMEA studies and GD&T
• Ability to perform Complete Seat packaging study of seating components
• Working knowledge of regulatory and certification requirements for seating system
• Maintain and develop Design Validation Plans (DVP), and Design Failure Mode Analysis (DFMEA)
• Good knowledge of seating system and component manufacturing processes
• Ability to define seating comfort and define comfort target
• Actively engage with Automotive OEM / Tier-I design engineers to collaborate on design projects for trading off cost, mass, joining methods, molding and testing performance.
• Propose and promote design improvement approaches including cost reduction and design optimization
• Complete and release Seating system, sub-system and detail designs
• Interpret CAE simulation results and integrate recommendations into product design

• Collaborate with seating suppliers and support overall vehicle development milestones and prototype/production build events

• Must have ability to perform feasibility studies, Check A-class surface and define craftsman ship target.

• Meet project deliverables commitments and timelines

• Design of automotive component parts in CATIA V5/V6

• Strong communication skills, both verbal and written, and capability to drive offshore team.

With a passion for life

Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers.

Are you looking for an inspiring career? You just found it.

Job Overview

Plans and oversees engineering activities and projects within the department. Develops and directs teams to design, optimize, and implement new manufacturing processes and equipment into production. Drives continuous improvement efforts in process design, cost savings, quality improvements, and resource utilization.

Job Responsibilities and Essential Duties:

• 
  
• Responsible for engineering projects, incorporating newest manufacturing technologies & methods, resolving engineering problems, and improving existing manufacturing processes/equipment.
  
• Responsible for upstream equipment qualification deliverables (URS, FAT, SAT, etc.).
  
• Prioritize and communicate project priorities based on current business needs.
  
• Responsible for achieving product quality, productivity, and standard cost goals.
  
• Maintain compliance with all regulatory standards for product and personnel safety.
  
• Guide, direct, and coordinate facility moves, process transfers, and new equipment installations ensuring improved product quality, manufacturing efficiencies, production yields, and reduce product costs.
  
• Support nonconformance investigation.
  
• Responsible for identification and communication with external machine builders and systems integrators.
  
• Support manufacturing objectives as specified by the management team by promoting investigation, inventiveness, creativity and solutions to various process, implementation, and material flow/control problems.
  
• Communicate new ideas, technology advances, and opportunities to management team for review, evaluation and action.
  
• Responsible for developing and maintaining department expense and capital budget(s).
  
• Create and maintain a safe environment. Ensure legal requirements and safety policies are enforced.
  
• Assist in special projects as needed.
  
• Contributes to team effort by accomplishing related duties as requested.
  

Required Knowledge, Skills and Abilities:

• 
  
• Ability to work with flexible and changing production schedules.
  
• Must be able to collaborate effectively with others, and work well within cross-functional teams and across multiple sites, as applicable.
  
• Self-motivated and have the ability to manage projects and problem solve on a regular basis.
  
• Highly organized with strong project management and technical abilities.
  
• Demonstrated ability to develop strategies that will help build a positive manufacturing environment.
  
• Ability to communicate with machine builders and system integrators.
  
• Strong negotiation skills required.
  
• Strong computer skills, including MS Office applications (Word/Excel) are required.
  

Minimum Requirements:

• 
  
• Bachelor's degree in Engineering, Industrial Management, or related field or equivalent.
  
• Minimum 10 years of experience within a manufacturing or process development environment, preferably within the Medical Device Industry.
  

Quality Requirements:

Build Quality into all aspects of their work by maintaining compliance to all quality requirements.

• 
  
• Ensure compliance to all FDA and Worldwide Quality & Compliance regulations (As applicable to the job function).
  
• Must have the education and experience to understand and comply with U.S. and Worldwide medical device regulations (As applicable to your job function).
  
• Attend all required Quality & Compliance training at the specified interval.
  
• Adopt the "Beyond Compliance Quality Culture" in the work environment; always meet and exceed requirements.
  

Environmental/Safety/Physical Work Conditions:

• 
  
• Ensures environmental consciousness and safe practices are exhibited in decisions.
  
• Duties are performed in an office/manufacturing/warehouse environment. May require the use of personal protective equipment as dictated by the work area.
  

The physical demands described here are a representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

The salary range for this position is between $94,000-$118,000/annually depending on experience and location, with a 5% STIP bonus

#LI-MV1

About us

With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries.

Benefits at Getinge:

At Getinge, we offer a comprehensive benefits package, which includes:

• 
  
• Health, Dental, and Vision insurance benefits
  
• 401k plan with company match
  
• Paid Time Off
  
• Wellness initiative & Health Assistance Resources
  
• Life Insurance
  
• Short and Long Term Disability Benefits
  
• Health and Dependent Care Flexible Spending Accounts
  
• Commuter Benefits
  
• Parental and Caregiver Leave
  
• Tuition Reimbursement
  

Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law.Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.

Job Title: Controls Engineer

Location: Grand rapids, MI

Duration: Long Term

Job Description :

Design and build automation and robotic equipment.

Own and implement solutions from project concept to installation.

Conduct machine concepting, proof-of-principle, electrical design/layout, software design/programming, and debug hardware/software.

Perform acceptance testing and installation/integration at the factory.

Stay updated with rapidly changing technology to deliver optimal solutions.

Essential Skills

Proficiency in Siemens TIA Portal.

6 + years of experience with TIA Portal.

PLC programming, HMI/SCADA design, and drive configuration.

Knowledge of controls hardware including sensors, remote IO, servos, VFDs, machine vision, and barcode readers.

Familiarity with industrial networking protocols such as Profinet, Ethernet I/P, and EtherCAT.

Experience with 6-axis robots, primarily FANUC.

Additional Skills & Qualifications

Bachelor’s Degree in Electrical Engineering, Controls and Computer Control Systems, Mechatronic Engineering, Automation Engineering, Mechanical Engineering, or equivalent experience.

Work Environment

Job Title: EDS Component Design Engineer

Location: Novi, MI

Role Overview

We are seeking an experienced EDS Component Design Engineer to lead the design and development of electrical distribution system (EDS) components for next-generation electric pickup trucks and rugged SUVs. The role will involve full lifecycle responsibility from concept design through validation, testing, and manufacturing launch.

The ideal candidate will have strong expertise in wire harness components and power distribution systems, working closely with cross-functional teams including engineering, purchasing, finance, and suppliers to deliver high-quality automotive components.

Key Responsibilities

• Design and develop EDS components including shields, troughs, grommets, connectors, terminals, and power distribution components.
• Support development from concept (clean sheet design) through virtual validation, testing, sign-off, and manufacturing launch.
• Collaborate with purchasing and finance teams to create technical specifications for sourcing and supplier quoting.
• Develop and maintain a standard library of core EDS components aligned with global automotive standards.
• Work closely with VW Group module owners and suppliers to define and release wiring and power distribution components.
• Perform virtual and physical verification testing, including field testing.
• Ensure compliance with safety standards and U.S. regulatory requirements.
• Contribute to production facility design for electric trucks and SUVs.
• Manage supplier deliverables to meet cost, quality, and program timing targets.
• Identify opportunities to improve system performance and consumer experience.

Required Qualifications

• Bachelor’s or Master’s degree in Electrical Engineering, Mechanical Engineering, Systems Engineering, or related field.
• 5+ years of experience in automotive wire harness or power distribution component design.
• Strong expertise in EDS component design and release processes.
• Experience working across complete product development lifecycle (design, testing, launch).
• Knowledge of Six Sigma engineering methods for design and problem solving.
• Familiarity with CAE tools or computer-aided engineering environments.
• Strong collaboration skills with cross-functional teams and suppliers.

Preferred Skills

• Experience working in electric vehicle platforms or advanced automotive programs.
• Knowledge of automotive electrical architecture and power distribution systems.
• Ability to work in fast-paced product development environments.

Embedded Software Engineer – Engine Controls GTM/AUTOSAR CDD development

Auburn Hills, MI

Full time Role

Customer wants Engineer having experience on Engine CDD Development using GTM timer module such as knock detection windows, spark control, fuel injector control, misfire detection, and manifold air pressure sensing.

Must to Have

• Experience with Infineon Generic Timer Module (GTM) for engine timing control.

• Understanding of digital signal processing concepts used in knock detection algorithms.

• Experience with AUTOSAR MCAL configuration using EB Tresos.

Key Responsibilities

• Develop Complex Device Drivers (CDD) for gasoline Engine Control Module (ECM/PCM) functions on ECU platform.

• Implement software for engine sensing and actuation including crank/cam position, engine speed, and direction detection.

• Support development of engine control features such as knock detection windows, spark control, fuel injector control, misfire detection, and manifold air pressure sensing.

• Implement above timing features using GTM-based timing and signal processing logic using modules such as TIM, TOM, ATOM.

• Integrate CDD logic with AUTOSAR BSW modules including NvM, RTE, OS, Digital IO, and Diagnostics.

• Support AUTOSAR BSW integration and ECU software architecture implementation.

• Work with MCAL drivers and support integration activities using EB Tresos Studio (modules such as ADC, DSADC, MCU, FEE, DMA, IRQ).

• Develop and debug software on Infineon AURIX TC38x microcontrollers.

• Support ECU software integration, testing, and debugging using Lauterbach Trace32 and ETAS INCA tools.

• Work closely with calibration, system, and hardware teams to support engine control feature development.

• Support issue analysis and root cause debugging during integration and validation phases.

Required Skills

• Strong Embedded C programming experience.

• Experience with ECM/PCM gasoline engine control software development.

• Hands-on experience in AUTOSAR BSW integration and CDD development.

• Experience with Infineon AURIX TC3xx (TC38x) microcontroller platform.

• Knowledge of engine sensing interfaces such as cam/crank sensors and injector/spark control mechanisms.

Job Title: Hardware Test Bench Technician

Location: Novi, MI

Job Overview

We are seeking a skilled Hardware Test Bench Technician to support engineering teams with installation, setup, maintenance, and troubleshooting of hardware test benches. This role requires hands-on technical expertise in wiring, soldering, diagnostics, and lab equipment handling within an electronics or automotive testing environment.

Key Responsibilities

• Install, wire, and configure hardware test benches as per engineering specifications and safety standards
• Perform preventive maintenance, troubleshooting, and repair of test bench components
• Assist engineering teams with hardware integration, diagnostics, and system test setups
• Maintain accurate documentation of procedures, configurations, and maintenance logs
• Manage inventory of tools, components, and lab equipment
• Support calibration and functional verification of test systems
• Ensure compliance with lab safety protocols and maintain workspace cleanliness

Required Qualifications

• Associate’s degree or certification in Electronics, Electrical Engineering Technology, or related field
• 2+ years of experience in hardware setup, lab support, or test environment
• Hands-on experience with wiring, soldering, and use of diagnostic tools (multimeters, oscilloscopes, etc.)
• Strong troubleshooting and problem-solving skills
• Ability to work independently and collaborate with cross-functional teams

Preferred

• Experience in automotive or electronics testing environments

Purpose of the job

Continuously improve customer satisfaction. Develop quality standards, investigate non-conforming products and materials, ensure containment, determine root cause, and implement corrective and preventive actions. Audit procedures and work instructions to ensure compliance. Partner with internal operations team members and key suppliers to implement error proofing and other process controls.

Essential Job Responsibilities

• Develop Supplier Quality Guidelines to identify capable suppliers, control change requirements, and respond to nonconforming materials
• Develop risk-based control plans using historical data and FMEA to ensure quality specifications deliver customer satisfaction efficiently
• Establish effective quality metrics to ensure process control and timely reaction to changes in capability
• Develop inspection and test methods to ensure the quality of incoming materials; and equipment and capability
• Establish effective quality control methods including poke yoke and SPC
• Investigate quality concerns, ensure containment, determine root cause and implement corrective and preventive actions
• Develop a deep understanding of relevant codes, product specifications, and manufacturing processes
• Maintain reference materials and control essential Quality Management System documents
• Provide cross-functional leadership to achieve specific breakthrough improvement goals
• Work cross functionally to develop procedures, work instructions, forms, and records in support of an effective Quality Management System
• Ensure revision control and convenient access

Essential Qualifications

Structural Concepts is looking for entry level to senior Quality Engineers, and a job offer will be in line with the following expectations:

Level I

• Education: BS in Engineering, Statistics, Operations or closely related field.
• Experience 1 – 3 years
• Problem Solving Skills
• Auditing skills
• Skilled in collecting and visualizing data using trend charts, histograms, Pareto charts, etc.
• Excellent phone and email communicator.
• Functional knowledge of MS desktop and ERP applications.

Level II

• Experience 3 – 7 years
• Quality Management -OR- equivalent experience and professional training
• Skilled in applying advanced Quality tools including, SPC, FMEA, Gauge R and R, Ishikawa diagrams, QFD, Regression, ANOVA, Cpk, etc.
• Skilled in APQP - identifying critical to quality (CTQ) variables and developing control plans

Level III

• Experience 7+ years
• Skilled in coaching and influencing others
• Deep understanding of ISO9001 Quality Management Systems
• Skilled in facilitation breakthrough process capability methods using six sigma and advanced statistical tools such as DOE

Job Title– Electrical Engineer (DRE)

Location: Novi, Michigan, USA

Job-Type: Full-Time

Job Summary

The Electrical Distribution System (EDS) Components Design Responsible Engineer (DRE) is responsible for the design, development, validation, and release of electrical distribution system components for Scout Motors’ all-electric pickup trucks and SUVs. The role involves managing component design from concept through production launch, collaborating with internal teams and suppliers, and ensuring compliance with safety regulations and engineering standards.

Key Responsibilities

1. Component Design and Development

• Design and develop all EDS components including:
• Shields
• Troughs
• Grommets
• Connectors and terminals
• Power distribution components
• Manage the full product lifecycle from concept design (clean-sheet development) through virtual development, testing, validation, and manufacturing launch.

2. Technical Specification & Sourcing Support

• Collaborate with Purchasing and Finance teams to develop detailed technical specifications.
• Support the quotation and sourcing process for EDS components.
• Work closely with suppliers to ensure components meet cost, timing, and quality targets.

3. Standards and Component Library Development

• Develop and maintain a standardized library of core EDS components aligned with global Volkswagen Group standards.
• Ensure components can be effectively integrated into vehicle wiring harness and power distribution systems.

4. Cross-Functional Collaboration

• Partner with VW Group module owners, internal engineering teams, and external suppliers to define and release EDS components.
• Foster a collaborative, high-performance engineering culture within the team.

5. Verification and Validation

• Conduct virtual simulations and physical testing for component verification.
• Participate in field testing and product validation activities to confirm performance and reliability.

6. Compliance and Safety

• Ensure all designs meet automotive safety standards and U.S. government regulatory requirements.
• Apply Six Sigma methodologies to improve product quality and solve engineering problems.

7. Manufacturing and Production Support

• Contribute to the design and development of production facilities for Scout electric vehicles.
• Support the transition of components from development to mass production launch.

8. Continuous Improvement

• Monitor consumer experience and feedback to identify potential system improvements.
• Proactively recommend enhancements to EDS systems and components.

Required Qualifications

Education

• Bachelor’s or Master’s degree in:
• Electrical Engineering
• Mechanical Engineering
• Systems Engineering
• Or a related engineering field.

Experience

• Minimum 5+ years of experience in:
• Electrical wire harness design
• Power distribution components design and release
• Automotive product development processes including design, testing, and production launch.

Technical Skills

• Strong expertise in:
• Wire harness component design
• Power distribution systems
• Six Sigma problem-solving methodology
• Familiarity with Computer-Aided Engineering (CAE) tools or relevant simulation technologies.

Job Title– Electrical Engineer

Location: Novi, Michigan, USA

Job-Type: Full-Time

Job Summary

The Electrical Distribution System (EDS) Components Design Responsible Engineer (DRE) is responsible for the design, development, validation, and release of electrical distribution system components for Scout Motors’ all-electric pickup trucks and SUVs. The role involves managing component design from concept through production launch, collaborating with internal teams and suppliers, and ensuring compliance with safety regulations and engineering standards.

Key Responsibilities

1. Component Design and Development

• Design and develop all EDS components including:
• Shields
• Troughs
• Grommets
• Connectors and terminals
• Power distribution components
• Manage the full product lifecycle from concept design (clean-sheet development) through virtual development, testing, validation, and manufacturing launch.

2. Technical Specification & Sourcing Support

• Collaborate with Purchasing and Finance teams to develop detailed technical specifications.
• Support the quotation and sourcing process for EDS components.
• Work closely with suppliers to ensure components meet cost, timing, and quality targets.

3. Standards and Component Library Development

• Develop and maintain a standardized library of core EDS components aligned with global Volkswagen Group standards.
• Ensure components can be effectively integrated into vehicle wiring harness and power distribution systems.

4. Cross-Functional Collaboration

• Partner with VW Group module owners, internal engineering teams, and external suppliers to define and release EDS components.
• Foster a collaborative, high-performance engineering culture within the team.

5. Verification and Validation

• Conduct virtual simulations and physical testing for component verification.
• Participate in field testing and product validation activities to confirm performance and reliability.

6. Compliance and Safety

• Ensure all designs meet automotive safety standards and U.S. government regulatory requirements.
• Apply Six Sigma methodologies to improve product quality and solve engineering problems.

7. Manufacturing and Production Support

• Contribute to the design and development of production facilities for Scout electric vehicles.
• Support the transition of components from development to mass production launch.

8. Continuous Improvement

• Monitor consumer experience and feedback to identify potential system improvements.
• Proactively recommend enhancements to EDS systems and components.

Required Qualifications

Education

• Bachelor’s or Master’s degree in:
• Electrical Engineering
• Mechanical Engineering
• Systems Engineering
• Or a related engineering field.

Experience

• Minimum 5+ years of experience in:
• Electrical wire harness design
• Power distribution components design and release
• Automotive product development processes including design, testing, and production launch.

Technical Skills

• Strong expertise in:
• Wire harness component design
• Power distribution systems
• Six Sigma problem-solving methodology
• Familiarity with Computer-Aided Engineering (CAE) tools or relevant simulation technologies.

Remora is hiring a Director of Project Execution. This individual will manage customer deployments of Remora’s carbon capture systems, guiding projects from planning through commissioning. The Director of Project Execution will be both a project driver and a customer advocate, ensuring deployments are safe, efficient, and aligned with customer needs, while also identifying opportunities for expanded partnerships.

We’re a 50-person climate tech startup based in Detroit, MI. We're building a device that captures a semi-truck’s carbon emissions directly from the tailpipe. We'll sell the CO2 to end-users, and share that revenue with our customers, so our device will create a new revenue stream while reducing their emissions.

We've signed up some of the largest companies in the world to pilot our technology, including iconic multibillion-dollar brands, top trucking companies, and some of the most recognizable Fortune 100 companies. We’ve raised multiple rounds of funding from top investors like Lowercarbon Capital, Union Square Ventures, First Round Capital, Y Combinator, and Valor Equity Partners.

Responsibilities

Plan & Develop

• Lead permitting and regulatory approval processes for customer sites.
• Coordinate with AE firms and engineers to design layouts, infrastructure, and system integration plans.
• Develop site plans and training procedures for site operations and maintenance.
• Support business development by identifying opportunities during planning to deepen customer partnerships.

Execute

• Manage deployment activities end-to-end, from permitting through construction, installation, and commissioning.
• Oversee contractors, vendors, and site partners to ensure scope, schedule, and budget targets are met.
• Identify risks early and implement mitigation strategies to avoid project delays or cost impacts.
• Travel frequently to customer sites to oversee execution and resolve challenges.
• Share customer insights with commercial teams to support account growth and expansion.

Collaborate

• Serve as the day-to-day customer-facing contact for deployment projects, providing regular updates and progress reports.
• Partner with internal engineering, EHS, and commercial teams to ensure deployments meet technical and safety standards.
• Work with municipalities, contractors, and regulators to coordinate permitting, construction, and inspections.

Grow

• Help develop scalable processes and playbooks for deployment that can be applied across multiple customer projects.
• Provide resources and training to ensure customers and partners are confident in operating deployed systems.
• Support customer success efforts by surfacing opportunities for long-term engagement and repeat deployments.

Design

• Contribute to process improvements by documenting lessons learned and standardizing practices.
• Ensure technical requirements are aligned with both customer needs and regulatory frameworks.
• Help optimize site deployment models for efficiency and repeatability.

Requirements

• 5–7+ years of experience in project/program management, ideally in energy, infrastructure, or industrial deployments.
• Experience managing contractors, vendors, and cross-functional teams.
• Strong customer-facing skills with a proven ability to build trust and manage expectations.
• Business development mindset, with the ability to identify and surface opportunities for account growth.
• Knowledge of permitting, construction, and system integration (mechanical/electrical).
• Excellent communication, organizational, and problem-solving skills.
• Ability to travel 50%+.

Here’s what we value:

• Mission First: We are laser-focused on our mission. We have chosen to take on the defining challenge of our time, and we don’t shy away from the hard decisions required to put our mission first, no matter how tough. The world needs our technology and it won’t happen any time soon if we don’t make it happen. We are a low-ego team, and we prioritize the mission over our self-interest. We think strategically with an eye to the long term, and we clearly separate what must be done well now, and what can be improved later, despite ambiguity.
• Burning Urgency: Our hard-core intensity and work ethic match the crisis we’re in. We have a strong bias toward action, and we execute with focus and speed. In the absence of guidance, we take charge, lead our teammates, and accomplish our goals. We aren’t afraid to change course when something isn’t working, and we find solutions even when it seems like there are none. We are cool under pressure, and our quiet determination and drive are unwavering. We relentlessly push ourselves and each other to improve. We don’t accept adequate performance. Excellence is the expectation. Many would say our standards are unreasonably high, and many would say our goals are unreasonably bold, but we are hungry to be exceptional. We will never give up, no matter what. If we get knocked down, we get back up, every time. We will not fail.
• Uncompromising Honesty: We are always honest with ourselves, our teammates, our customers, our investors, our suppliers, our communities, and all of our partners, especially about what’s not going well and what we don’t know. When we see issues, risks, or challenges, we speak up, and when we make mistakes, we admit them proactively and take full accountability. We challenge others directly when we disagree, even when it’s uncomfortable, and we seek this uncompromising honesty from others.
• Treat People Exceptionally Well:We care intensely about everyone who is on this mission with us, and our standard is exceptional respect for our teammates, partners, and communities. Teammates who bring different perspectives and backgrounds are essential to our success, and we empower everyone to share their voice. We listen to truly understand. We constantly encourage and help our teammates, and inspire each other with our enthusiasm and optimism.
• Joyful Curiosity: We love to learn, and we learn quickly. We explore the unknown with wonder and excitement. We reason from first principles. We generate original ideas with an open mind and test them quickly in the real world. We take risks and adapt as we discover more. We explore many ideas in parallel, and we don’t count on a silver bullet solution. We share our ideas freely with our teammates. We are skeptical about conventional wisdom, and we question every assumption and requirement. We are always looking for ways to simplify. We are rigorous and attentive to detail. We are eager to understand all aspects of our business and technology, and we contribute effectively outside our individual specialties. We never stop learning.

Logistics:

• Location: Wixom, MI
• Start date: Immediately

Compensation and Benefits:

• Salary: $180,000 - $220,000
• Competitive Stock Options
• Healthcare (Aetna)
• Retirement (401k)
• Student loan assistance
• Three Weeks of paid time off
• Eleven Holidays off
• Dependent care assistance (childcare or eldercare)
• Parental leave
• Unlimited sick and compassionate leave
• Employee development and coaching
• Office setup (remote) or relocation (in-person) stipend

Studies show that many qualified candidates hesitate to apply unless they meet every listed qualification. If you’re enthusiastic about this role—even if you don’t meet every requirement—we encourage you to apply. We’re most excited to work with people who learn quickly and want to tackle the climate crisis.