Engineering Structures Elsevier Impact Factor Jobs in Fall River Ma Flexible

758 positions found

Executive Chef
✦ New
Salary not disclosed
Barrington, RI 1 day ago


FLSA Status: Exempt

Department: Food and Beverage Kitchen

Reports to: Chef De Cuisine & General Manager


Purpose:

The Chef is directly responsible for the cost-effective operation of a clean and safe kitchen while meeting or exceeding food quality and speed of service requirements. The Chef works as part of the management team of the restaurant to build sales and grow the business and is responsible for operating a profitable restaurant, where the quality of food, service and ambience are continually challenged and improved, and where an environment that fosters creativity, free thinking and intelligent decision-making is encouraged.

The Chef is expected to work an average of 5055 hours per week.

Essential Duties:

-Creating and maintaining an upbeat, productive, and educational environment.

- Projecting a positive attitude.

- Showing respect for all employees and actively cultivating an inclusive environment build upon

mutual respect, civility, and positivity.

- Providing ongoing training and constant improvement of product and workplace (i.e., safety,

sanitation and systems).

- Setting the pace and tone of the kitchen and overall restaurant through attitude,

initiative and drive.

- Providing feedback and direction to BOH employees, to continue ongoing development.

-Helping to develop a cohesive team and leading them to work toward the common goals of the

restaurant.

- Possessing a high level of initiative and drive to do whatever is necessary to build and run a

successful operation.

- Working closely with the General manager to create a team atmosphere among the entire staff that is both a positive and professional work environment.

- Leading by example, taking an active role in cooking and supervising the line during dinner service.

- Participate in mini meetings with FOH management on a regular basis to ensure clear line of communication and upkeep of company goals.

- Establishing clear communications along all lines within the business.

Building the Business and Guest Base

- Aggressively working to build food sales by operating the kitchen with a guest-satisfaction mentality.

- Making decisions based on what is best for the guest.

- Solving problems so that each guest will want to return.

-Working with the GM and front of house manager to train staff on product knowledge.

Quality of Operations

-The Chef is responsible for ensuring that the restaurant is operating at or above company standards. The

-Chef must pay attention to detail in all areas of the operation, including food quality and consistency, training

and development, security, safety, sanitation, and physical structure.

Specifically:

- Ensuring strict adherence to standards for food quality.

- Demonstrating commitment to cultivating knowledgeable staff members who are proud of our

quality and believe in our concept.

- Ensuring all Health Department regulations are always enforced.

Cost Management and Profitability

The Chef is responsible for generating strong financial performance for the health of the restaurant and the

company. They are ultimately responsible for ensuring that the food and BOH labor costs meet or exceed

budgeted financial goals.

Specifically:

- Working proactively with the General Manager to maximize sales and optimize profits through the

management of food and labor costs.

- Food COGS goal of 28% or less.

- Total Kitchen Labor goal of 11%

- Analyzing weekly costs to ensure proactive management of controllable costs.

- Assuming full responsibility for:

- Monitoring daily BOH labor reports and minimizing overtime.

- Providing a monthly physical inventory

- Maintaining the valuations on your inventory using invoices from vendor

- Purchasing and Receiving

- Monitoring local vendors accordingly.

- Placing effective orders, based on sales, while simultaneously taking advantage of drop size

incentives.

- Proper receiving, rotation, storage, and handling of all food products.

Production

- Taking a hands-on approach and being directly involved in daily production.

- Setting appropriate prep levels (sales versus usage) to ensure fresh product and effective use of

labor, including:

- Daily prep counts.

- Weekly prep totals and weekly prep plans.

- Regular review of Product Mix (P-Mix) information.

Personnel

The Chef is responsible for overseeing all aspects of kitchen staffing and is responsible for the hiring and

scheduling of quality employees to execute the menu successfully and to maintain the smooth flow of

kitchen operations.

Specifically:

- Establishing and maintaining appropriate staffing levels and remaining abreast of any changes that may

impact staffing needs.

- Keeping the GM informed of all staffing needs.

- Ensuring thorough and complete training of all employees, including kitchen operations, knife

safety, proper handling of product, use of chemicals, use of equipment, etc.

- Minimizing employee turnover.

- Providing coaching, mentoring and development to all employees as this is critical for the

success of the restaurant and the company.

- Mentoring, coaching and developing Sous Chef Donald Readington to be an extension of yourself. Sous

development should include; menu engineering, systems development, training systems, vendor

negotiations and kitchen management.

- Providing consistent and frequent feedback to Sous Chef(s) and staff.

- Teaching and coaching staff daily.

- Holding BOH meetings to review specials, menu items and discuss kitchen issues.

- Attending FOH Pre-Meals to review specials, menu items and discuss kitchen issues.

- Producing an accurate forecast

Administration

- Overseeing the creation and implementation of all menus.

- Ensure all menu changes are rolled out according to The Terrace Rooftop Dining procedures

- Ensuring that performance reviews of all BOH employees are completed annually

Facility and Equipment

The Chef is responsible for the daily upkeep of the physical restaurant/kitchen, specifically:

- Providing a daily walk through of the kitchen to determine areas needing attention or repair.

- Maintaining a running punch list of need to have as well as nice to have items which are

handled in a timely fashion as appropriate.

- Planning necessary upgrades in a timely, well thought out way.

- Calling appropriate repair companies

- Keeping The Terrace Leadership informed of all necessary repairs and logging repairs and

Maintenance.

This job description is not an exclusive or exhaustive list of all job functions that an associate in this position may be asked to perform from time to time.




Compensation details: 75 Yearly Salary


PI152e172c56af-26289-39969973

Not Specified
Tax Associate
✦ New
Salary not disclosed
Swansea, MA 1 day ago
H&R Block Tax Associate

At H&R Block, we believe in the power of people helping people. Our defining Purpose is to provide help and inspire confidence in our clients, associates, and communities everywhere. We also believe in a high performing, connected culture, where everyone feels like they belong.

We strive to continuously improve our business and have committed to a long-term strategy and transformation plan known as Block Next. This multi-year roadmap focuses on innovation, client experience, and sustainable growth. It is designed to elevate how we work, how we serve, and how we lead in our industry.

At H&R Block, we're curious, creative, and always on the move. If you embrace challenges as opportunities and seek to make a meaningful difference where you live, work, and play, our door is always open.

A Typical Day...

Joining H&R Block as a Tax Associate means you will have the support of an expert team dedicated to providing you with the tax training you need to be successful. You will also have the freedom, flexibility, and extra earnings you will need to embrace what makes your life uniquely yours.

  • Conduct tax interviews with clients face to face and through virtual tools video, phone, chat, email
  • Prepare complete and accurate tax returns
  • Generate business growth, increase client retention, and offer additional products and services
  • Provide clients with IRS support
  • Support office priorities through teamwork and collaboration
  • Grow your tax expertise
It Would Be Even Better If You Also Had...
  • Bachelor's degree in accounting or related field
  • Previous experience in a customer service or retail environment
  • Experience working in a fast-paced, supportive environment
  • Ability to work a minimum of 25-35 hours weekly throughout tax season and up to 40 hours during peak weeks
What You'll Bring To The Team...
  • Successful completion of the H&R Block Tax Knowledge Assessment or Income Tax Course1
  • Experience working in a fast-paced environment
  • Comfort working with virtual tools video, phone and chat
  • Ability to effectively communicate in person, via phone and in writing
  • Must meet all other IRS and applicable state requirements
  • High school diploma / equivalent or higher
Why Work For Us

At H&R Block, we believe and invest in our people by committing to their total well-being. Our benefit offerings can help associates plan for their unique health, wellbeing and financial wellness needs.

  • Employee Assistance Program with Health Advocate.
  • Wellbeing program, BetterYou, to help you build healthy habits.
  • Neurodiversity and caregiver support available to you and your family.
  • Various discounts on everyday items and services.
  • Benefits with additional eligibility requirements: Medical Coverage, 401k Retirement Savings Plan and Employee Stock Purchase Plan.

The Community You Will Join:

At H&R Block we remain committed to building a Connected Culture one in which trust, care, and connections are how we work together as we continue to create an environment where everyone feels safe to bring their authentic self to work every day and feels like they belong as part of a larger team.

You will be immersed in an exceptional work environment that is recognized throughout the world on Best Companies lists! You will also be surrounded by colleagues who are committed to helping each other grow and support each other.

H&R Block is an equal opportunity employer. We welcome and celebrate diversity in the workplace regardless of gender, race or color, ethnicity or national origin, age, disability, religion, sexual orientation, gender identity or expression, or veteran status.

If you're looking to make an impact, H&R Block is the place for you.

1 - Enrollment?in?or completion of the H&R Block Income Tax Course or Tax Knowledge Assessment is neither an offer nor a guarantee of employment.

Pay Range Information

The pay range for this position is listed below. Local minimum wage laws apply. This information is posted pursuant to local requirements to provide applicants with information about what they might be eligible to receive. Individual pay decisions will depend on job-related factors such as experience, education, skill, performance, and geographic location where work will be performed. Successful candidates may be able to participate in one or more incentive compensation or short-term incentive plans, which could generate additional earnings in accordance with the terms of each plan. Qualifying associates can enroll themselves and/or their eligible dependents in medical and prescription drug coverage; can participate in the H&R Block Retirement Savings Plan (401(k) Plan), the Employee Assistance Program, (virtual) fitness center programs, and the associate discount program; are automatically enrolled in Business Travel Accident Insurance; and receive Associate Tax Prep benefit.

Pay Range

$11.00 - $27.00/Hr.

Sponsored Job

#20508

Not Specified
CDL Driver -Class A- Travel
$14.84 - $39.46 Hourly
Assonet, MA 6 days ago

Clean Harbors in Stoughton MA is seeking a TRAVEL  Class A CDL Driver (Hazmat) to operate a variety of heavy and light duty trucks/work equipment at our customer sites; some of the vehicles operated include vacuum trucks, Cuscos, guzzlers, and roll offs.  This role is responsible for performing driving and non-driving duties on and off customer sites associated with hazardous waste clean-up.


Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico.  Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us.


Why work for Clean Harbors?


 



  • Health and Safety is our #1 priority and we live it 3-6-5!
  • Focus on maintaining sustainability and cleaning the Earth 
  • Comprehensive health benefits coverage after 30 days of full-time employment including 401K with Company match
  • Own part of the company with our Employee Stock Purchase Plan
  • Opportunities for growth and development for all the stages of your career
  • Company paid training and tuition reimbursement

 


 

RESPONSIBILITIES

Key Responsibilities:


  • Ensure Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and always acting in a safe manner
  • Operate commercial trucks and assist field laborers when needed (team atmosphere where everyone helps)
  • Operate a variety of Class A trucks
  • Loading and unloading of trucks
  • Manual labor on site to ensure fulfillment of customer needs
  • Proper placarding of vehicles to meet Company and DOT requirements/regulations
  • Maintain daily logs, time sheets, and various reports
  • Follow all local, state (provincial) and federal compliance regulations and rules
  • Safely operate vehicles in accordance with U.S. DOT, local, state (provincial) and federal requirements
  • Safely observe all corporate operating guidelines and procedures
  • Observe all company environmental health and safety operating guidelines
  • Performs other duties as assigned
  • By position, ability to be on call for emergency response on rotating basis every other week
  • By position, site-remediation, equipment decontamination, and the handling of hazardous materials

QUALIFICATIONS

Required Qualifications:


  • Valid Class A CDL 
  • Ability to obtain Hazmat and Tanker endorsement within 90 days of employment
  • Ability to use various mobile devices
  • Perform physical functions per job requirements
  • Successfully complete a background check, drug test, and physical, by position
  • Per OSHA's Respiratory Protection Standard, 29 CFR 1910.34, employees in positions requiring respirators are required to meet facial hair standards.
  • Ability to work the TRAVEL TEAM-- 100%  travel to various locations as needed per emergency response


Preferred Qualifications:


  • Commercial driver experience 
  • Hazmat and Tanker endorsement 
  • Previous Hazmat experience 
  • Ability to operate a manual transmission
  • Previous manual labor experience


Clean Harbors is an equal opportunity employer.


Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact or 1-844-922-5547.


Clean Harbors is a Military & Veteran friendly company.


Clean Harbors is committed to complying with applicable pay transparency laws and ensuring fair and equitable compensation. The posted salary range reflects the minimum and maximum target for this role. Final compensation may vary based on factors such as location, experience, skills, and business needs. In addition to the base salary, some roles may be eligible for bonus or incentive compensation and a comprehensive benefits package.


*CH


permanent
Marine Interdiction Agent
✦ New
Salary not disclosed

NEW RECRUITMENT AND RETENTION INCENTIVES! Air and Marine Operations (AMO), a component of U.S.

Customs and Border Protection (CBP) offers those with Merchant Mariner Credentials the exceptional opportunity of a career in law enforcement working with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission protecting America.

If you're looking for an exciting and rewarding job that also provides great pay, benefits, and job stability, now is the time to make your move: become a Marine Interdiction Agent .

AMO is actively seeking applicants to fill full-time security-based positions with the nation's largest law enforcement organization charged with maintaining the security of our national borders while facilitating lawful international travel and trade.

DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW! Salary and Benefits Begin your career as a Marine Interdiction Agent (MIA) and make up to $73,939–$96,116 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location.

Recruitment Incentive: New hires that are eligible may receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102.

Eligibility will be determined by Human Resources.) Example annual compensation for the first three years at our CAMB and subordinates new-hire locations (RUS LEAP 25% Retention Incentive).

GS-11 1st year annual pay
- $102,424 GS-12 2nd or 3rd year annual pay
- $132,931 GS-13 3rd year of annual pay
- $158,075 Example annual compensation for the first three years at our Key West, Key Largo, and Marathon, FL new-hire locations (Locality Salary Table LEAP 25% Retention Incentive) GS-11 1st year annual pay
- $108,431 GS-12 2nd or 3rd year annual pay
- $141,575 GS-13 3rd year of annual pay
- $168,352 Example annual compensation for the first three years at our Long Beach, CA new-hire locations (Locality Salary Table LEAP 25% Retention Incentive) GS-11 1st year annual pay
- $107,749 GS-12 2nd or 3rd year annual pay
- $154,974 GS-13 3rd year of annual pay
- $184,285 This career ladder position has a grade level progression of GS-11, GS-12 and GS-13.

You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52-weeks at each grade level (with supervisor approval) and any additional training, licensing, and certification requirements.

Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.

Recruitment Incentive (RI): Upon Entrance on Duty (EOD), you may be eligible to receive a Recruitment Incentive LEAP: Law Enforcement Availability Pay (25% Everyone) RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) Locations, Key Largo, FL, Key West, FL, Marathon, FL and Long Beach, CA)
*Retention Incentive is contingent on eligibility.

Eligibility will be determined by Human Resources Duty Locations A duty location will be offered after successful completion of the pre-employment process.

The duty location listed in the final offer letter may include any geographic location within the Southwest Region, Southeast Region or Caribbean Air and Marine Branch.

Note: Your opportunity for final selection is increased based on your flexibility to Enter on Duty at priority duty location.

Current possible duty locations include: Southeast Region: Fort Lauderdale, Miami and Marathon, FL and CAMB: Fajardo, Mayaguez, Ponce, and San Juan PR; and Saint Thomas, VI Northern Region: Bellingham, WA Limited Duty Locations as of – 1 2/1/2025 Applying to this JOA does not guarantee any of the locations listed below will still be available once you've completed the pre-employment process.

Locations are offered based on the current needs of the service at that time.

Northern Region: Port Huron, MI Southeast Region: Houma, LA Southwest Region: San Diego, CA Duties and Responsibilities As a Marine Interdiction Agent, you will perform marine-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States.

Typical duties may include: Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.

Interpreting radar data to calculate appropriate intercept while tracking vessels and people to a successful interdiction.

Searching persons, vessels, baggage, and cargo for contraband or weapons incidental to detention or arrest.

Collecting, refining, and analyzing strategic and tactical intelligence.

Qualifications This GS-11 grade level position has a selective factor: As a minimum qualification requirement all candidates must have a qualifying Merchant Mariner Credential.

See the U.S.

Coast Guard Issued Merchant Mariner Credentials (MMC) section that is listed below for qualifying capacities.

You qualify for the GS-11 grade level if you possess one (1) year of specialized experience equivalent to at least the next lower grade level, performing duties such as: Independently applying advanced skill in controlling/commanding law enforcement scenes to include conducting searches, making arrests, processing arrests and seizure of evidence and property.

Conducting investigative inquiries using various techniques, examining files and records, physical and documentary evidence to identify logical conclusions.

Utilizing cameras and other electronic high-tech surveillance equipment to gather evidence, collect, evaluate, and then preserve that physical and documentary evidence.

Highly skilled in writing comprehensive arrest, criminal and incident reports.

Assisting government or state attorneys in preparation for court cases or grand juries, testifies as a law enforcement officer in court proceedings, and administrative forums.

Considerable experience applying arrest authorities and constitutional law in various alleged criminal situations, or knowledge and experience of CBP laws, regulations, policies, legal precedent.

OR GS-11 Education Substitution for experience: A Ph.D.

or equivalent doctoral degree, three (3) full years of progressively higher-level graduate education leading to such a degree, or LL.M.

OR Combining Experience and Education: A combination of successfully completed post-bachelors' education (above) and experience.

This will be calculated using your resume and unofficial transcripts submitted with your application.

AND U.S.

Coast Guard Issued Merchant Mariner Credentials (MMC): You must submit a valid, legible copy of your Merchant Mariner Credential at time of application.

Your copies must include the expiration and capacity pages of your MMC.

Qualifying Capacities are Operator of Uninspected Passenger Vessel (OUPV), Mate of 200 gross tons or greater (Inland, Great Lakes, Near Coastal or Oceans), Chief Mate, Second Mate, and Third Mate Unlimited Oceans or Master of 25 GRT or greater (Inland, Great Lakes, Near Coastal or Oceans) OR An Accepted MMLD Application: You must submit proof an accepted MMLD application, for a MMC with a qualifying capacity, and a credential status that is in a positive standing.

It cannot be pending additional information for MMLD application process.

You must have your Official MMC Credential in hand at the time of scheduling and at assessment appointment.

NOTE: Your resume must explicitly indicate how you meet this requirement, otherwise you will be found ineligible.

Please see the "Required Documents" section below for additional resume requirements.

Other Requirements Citizenship : You must be a U.S.

Citizen to apply for this position.

Residency : You must have had primary U.S.

residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Requirement: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions.

Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03.

The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C.

8336(c) or Title 5 U.S.C.

8412(d).

AGE WAIVER: Creditable law enforcement officer service
- Covered by Title 5 U.S.C.

8336(c) or Title 5 U.S.C.

8412(d), or creditable service covered by Title 5 U.S.C.

8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement.

This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C.

8336(c) or Title 5 U.S.C.

8412(d).

Veterans' Preference Eligibility
- To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decision Isabella v.

Dept of State, the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C.

3312.

You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.

Training : This position has a training requirement.

You may be required to successfully complete the training requirement as a condition of employment.

Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.

Travel Required: You may be expected to travel for this position based on operational needs.

How to Apply Click the Apply button on this site.

You will be linked to the CBP Talent Network registration page.

For Position of Interest select Air and Marine Operations (Marine Interdiction Agent (MIA)), then complete the pre-screening questions.

You'll then receive a link(s) to the MIA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application.

Be certain to review ALL details of the job opening announcement and follow all instructions in the application process.

As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.

Not Specified
Women Under 40: Earn $35,000–$40,000 as a Surrogate
Salary not disclosed

Do you want to become a surrogate? We are now offering a sign on bonus to all qualified and matched surrogates that sign contracts. The first step is to fill out our surrogate application. A fertility specialist will contact you to continue the process. For intended parents interested in surrogacy to start or grow their families please contact us today. The surrogacy process is complex, but we will be with you every step of the way. Call today to get started.

Women who may have the ability to produce eggs but are unable to use their uterus or do not have a uterus, may consider a surrogate. A donated egg may also be used with the surrogate in the event a woman cannot produce her own eggs or her uterus is not intact or insufficient to carry a pregnancy. In either case, the husband's sperm, if viable, may be used.

Using an egg donor unrelated to the surrogate carrier eliminates any biological tie. The egg of the surrogate is never used as part of the assisted reproduction process, so that a surrogate is never in the position of delivering her own biological child.

The basic requirements of a woman to serve as a surrogate are:

  • Emotionally stable
  • Responsible
  • In good physical health
  • Non-smoker
  • Has had at least one successful pregnancy
  • Is capable of carrying a child to full term

A woman is not required to fall within a particular age range to serve as a surrogate, but most intended parents prefer a surrogate under the age of 40. For more information on surrogacy please see the documents on the left side of this page.

In Texas, there is a judicial process for validating the Gestational Contract (the contract between the intended parents and the surrogate). Included within the various requirements for having a Gestational Contract validated by a Texas court is that the intended parents must be married and the surrogate must have previously carried a child to term. Additionally, there are residency requirements that apply to either the surrogate or the intended parents, but not both.

Compensation for a surrogate services generally starts in the range of $35,000 - $40,000, for base compensation with over all fees up to 70k, in many cases. The amount of compensation is dependent upon a variety of factors, including, but not limited to, whether the surrogate carries twins, what procedures a surrogate is required to undergo and whether the delivery is vaginally or by cesarean section.

Not Specified
Lead Mechanical Systems Engineer - Remote Structures and Integration (AUSTIN)
Salary not disclosed
Job Title: Principal Mechanical Design Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 30% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

- Lead mechanical design reviews and contribute to cross-functional design validation efforts.

- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

- Conduct root cause analysis and corrective actions for mechanical failures or field issues.

- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience:

- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

- Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices

- Comfortable working as part of a global team

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Able to mentor less experienced engineers

- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering

- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

- Active Professional Engineer (PE) license.

- Knowledge of regulatory and safety standards applicable to data center infrastructure.

- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Integration Engineer – DCI Pipes, Frames and Structures (REMOTE) (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
AUSTIN, Texas, Remote 4 days ago
Job Title: Principal Mechanical Design Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

- Lead mechanical design reviews and contribute to cross-functional design validation efforts.

- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

- Conduct root cause analysis and corrective actions for mechanical failures or field issues.

- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience:

- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

- Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices

- Comfortable working as part of a global team

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Able to mentor less experienced engineers

- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering

- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

- Active Professional Engineer (PE) license.

- Knowledge of regulatory and safety standards applicable to data center infrastructure.

- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Senior Mechanical Systems Engineer - Remote Structures and Piping (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
AUSTIN, Texas, Remote 4 days ago
Job Title: Principal Mechanical Design Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

- Lead mechanical design reviews and contribute to cross-functional design validation efforts.

- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

- Conduct root cause analysis and corrective actions for mechanical failures or field issues.

- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience:

- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

- Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices

- Comfortable working as part of a global team

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Able to mentor less experienced engineers

- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering

- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

- Active Professional Engineer (PE) license.

- Knowledge of regulatory and safety standards applicable to data center infrastructure.

- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Integration Engineer – DCI Pipes, Frames and Structures (REMOTE) (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

- Lead mechanical design reviews and contribute to cross-functional design validation efforts.

- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

- Conduct root cause analysis and corrective actions for mechanical failures or field issues.

- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience:

- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

- Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices

- Comfortable working as part of a global team

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Able to mentor less experienced engineers

- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering

- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

- Active Professional Engineer (PE) license.

- Knowledge of regulatory and safety standards applicable to data center infrastructure.

- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Integration Engineer – DCI Pipes, Frames and Structures (REMOTE) - Cutting-edge Data Center Projects (WASHINGTON)
✦ New
🏢 JABIL CIRCUIT, INC
Salary not disclosed
WASHINGTON, District of Columbia, Remote 1 day ago
Job Title: Principal Mechanical Design Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

- Lead mechanical design reviews and contribute to cross-functional design validation efforts.

- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

- Conduct root cause analysis and corrective actions for mechanical failures or field issues.

- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience:

- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

- Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices

- Comfortable working as part of a global team

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Able to mentor less experienced engineers

- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering

- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

- Active Professional Engineer (PE) license.

- Knowledge of regulatory and safety standards applicable to data center infrastructure.

- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
jobs by JobLookup
✓ All jobs loaded