Engineering Structures Elsevier Impact Factor Jobs in Ellicott City, MD

About the Role

The Sales Engineer plays a key role in supporting the sales team by developing cost estimates, evaluating project requirements, and recommending product solutions for mission-critical environments. This position bridges the gap between engineering and sales, ensuring that project specifications, budgets, and technical requirements are clearly understood and translated into practical product solutions. The role involves working closely with sales representatives, engineers, and clients to develop estimates, create bills of materials, and support the quoting process while contributing to product innovation within the rapidly evolving data center sector.

Key Responsibilities

• Facilitate communication between the sales team, clients, and engineering teams to ensure project requirements, budgets, and timelines are clearly defined.
• Review construction drawings and technical specifications to recommend appropriate product solutions.
• Interpret project requirements from Sales Managers and assess feasibility, lead times, and potential technical challenges.
• Develop cost estimates and create quotes for custom or new product designs.
• Build and maintain design history throughout the quotation process.
• Prepare initial bills of materials and provide cost analysis for proposed solutions.
• Provide application engineering support for products designed for data center and mission-critical environments, including containment solutions.
• Monitor trends in data center design and collaborate with R&D teams to support new product development.
• Maintain awareness of new technologies, materials, and best practices to improve product performance and production efficiency.
• Represent the company at relevant data center industry conferences and trade shows.

Additional Expectations

• Maintain compliance with all internal policies, codes of conduct, and corporate governance requirements.
• Ensure adherence to product compliance standards, regulatory requirements, and market expectations.
• Support company compliance management processes and report any compliance concerns appropriately.

Requirements

• Bachelor’s degree in Engineering or a related field.
• Minimum 2 years of engineering experience.
• Experience within a manufacturing environment is advantageous.
• Ability to read and interpret construction drawings and specifications.
• Basic knowledge of server technology and associated hardware.
• Strong proficiency with Microsoft Office (Excel, Word, Teams).
• Experience with SolidWorks, AutoCAD, or Revit is a plus.
• Strong written and verbal communication skills.
• Excellent organizational skills and attention to detail.

Position Overview

Serve as a technical advisor to sales teams and clients by translating requirements into complete, accurate, and executable structured cabling solutions. This role bridges pre‑sales, estimating, and operations by delivering compliant designs, pricing, documentation, and effective project handoff for SCS RFPs.

Key Responsibilities

• Act as a technical advisor to account executives and clients throughout the pre‑sales and proposal lifecycle

• Conduct on‑site surveys to assess infrastructure, pathways, and constructability

• Perform detailed client needs analyses to define scope, assumptions, and solution requirements

• Generate accurate Bills of Materials (BOMs) and labor estimates within P&L constraints

• Develop comprehensive Statements of Work (SOWs) for Structured Cabling Systems (SCS) RFPs

• Define and document project assumptions, terms & conditions, and exclusions for proposals

• Review RFP documentation and prepare RFIs as required

• Design functional, code‑compliant solutions aligned with core product offerings and technical capabilities

• Provide technical support during scope reviews, pre‑bid meetings, and client presentations

• Participate in pre‑bid meetings and proposal strategy discussions

• Lead or participate in project kickoff meetings to transfer scope, risks, and execution details to operations

• Ensure design and estimate accuracy to support successful project execution and margin targets

Core Technical Skills

Ability to read and interpret:

• Cabling pull schedules

• Floor plans, ceiling plans, and riser diagrams

• Line diagrams and system schematics

Strong understanding of:

• Structured cabling installation methodologies

• Proper rack fabrication

• Copper and Fiber Cable Termination Standards

Additional competencies:

• Proven experience estimating large‑scale commercial cabling projects

• Proficiency in mathematics, statistics, and data analysis for cost modeling

• Expertise with analytical tools such as spreadsheets and database managers

• Strong ability to interpret technical specifications, drawings, and contract documents

Professional Skills

• Exceptional analytical skills with strong attention to detail

• Clear, concise technical and narrative report writing skills

• Strong written and verbal communication skills for client‑facing and internal collaboration

• Excellent time management with the ability to manage multiple deadlines

• Highly organized, self‑motivated, and effective at multitasking

• Strong troubleshooting and problem‑solving capabilities

Tools & Technology

Microsoft Office Suite:

• Excel (estimating, analysis, labor modeling)

• Word (SOWs, RFP responses, documentation)

• PowerPoint (technical and sales presentations)

Additional tools:

• Salesforce (document management and collaboration)

• Bluebeam (document markup and take‑offs)

Experience & Education

• 5+ years of experience in commercial structured cabling or low‑voltage environments (preferred)

• BICSI Technician Certification

• Demonstrated knowledge of end‑to‑end delivery of cabling installation projects

Physical Requirements

• Ability to stand and/or walk active job sites during surveys and pre‑construction activities

Growth & Development

This role offers hands‑on training and mentorship with experienced estimators and technical staff, with opportunities for advancement into a Senior Estimator (RCDD) role based on performance and experience.

Are you looking for exciting opportunities to lead efforts to model, analyze, and develop state of the art concepts in integrated and layered missile defense involving kinetic and non-kinetic capabilities?

Do you love working in an exciting and collaborative environment to tackle challenging technical problems?

Do you want to have a tangible impact on the world around you and contribute to solving critical challenges that face the country?

If so, we 're looking for someone like you to join our team at APL!

We are seeking a senior engineer (or equivalent background) to help us lead teams to model, analyze, and develop the next generation of solutions to our nation's most challenging missile defense problems. As the threats to our defenses grow, we need creative thinkers and leaders that will push the boundaries of capability to ensure we stay ahead of these threats by thinking outside the box, taking risks, and collaborating across a team of engineers.

As a Senior Missile Defense Systems Modeling and Analysis Engineer...

• Your primary responsibility will be leading teams and writing and using MATLAB to develop and analyze Missile Defense systems.
• You will model, analyze, and lead performance assessments of fielded and conceptual systems and find opportunities for improvement.  You will propose and develop innovative concepts/algorithms to improve US capabilities.
• You will develop presentations to effectively communicate technical recommendations to APL leadership, government sponsors, and the engineering community.
• You will contribute to a dynamic group culture to uphold core values through participation in collaborative teams and activities, as well as a dedication to continual improvement, innovation and risk-taking, and developing high quality products.

You meet our minimum qualifications for the job if you...

• Have a Bachelor's in electrical engineering, physics, mathematics, or equivalent degree 
• Have at least 5+ years of experience in a professional engineering setting with Department of Defense focus
• Have proven experience in leading complex, multi-disciplinary analyses
• Have proficiency using MATLAB, including using Object Oriented capabilities, to conduct modeling and simulation, perform analysis, and create visualizations
• Have proficiency using version control software to develop MATLAB simulations in a team environment
• Excel in a multi-disciplinary team environment
• Are an effective communicator, both written and verbal
• Have or can obtain an Interim Secret security clearance by your start date and can ultimately obtain a Top Secret level security clearance. If selected, you will be subject to a government security investigation and must meet the requirements for access to classified information. Eligibility requirements include U.S. citizenship.

You 'll go above and beyond our minimum requirements if you...

• Have specific domain knowledge of Missile Defense Agency, US Space Force, Navy, and Army sensors, battle management systems, and kinetic and non-kinetic defeat capabilities
• Have proficiency using MATLAB to develop event-driven simulations 
• Have a Top Secret or higher clearance

#LI-KW1

Why Work at APL?

The Johns Hopkins University Applied Physics Laboratory (APL) brings world-class expertise to our nation’s most critical defense, security, space and science challenges. While we are dedicated to solving complex challenges and pioneering new technologies, what makes us truly outstanding is our culture. We offer a vibrant, welcoming atmosphere where you can bring your authentic self to work, continue to grow, and build strong connections with inspiring teammates.

At APL, we celebrate our differences of perspectives and encourage creativity and bold, new ideas. Our employees enjoy generous benefits, including a robust education assistance program, unparalleled retirement contributions, and a healthy work/life balance. APL’s campus is located in the Baltimore-Washington metro area. Learn more about our career opportunities at   

All qualified applicants will receive consideration for employment without regard to race, creed, color, religion, sex, gender identity or expression, sexual orientation, national origin, age, physical or mental disability, genetic information, veteran status, occupation, marital or familial status, political opinion, personal appearance, or any other characteristic protected by applicable law. APL is committed to providing reasonable accommodation to individuals of all abilities, including those with disabilities. If you require a reasonable accommodation to participate in any part of the hiring process, please contact 

The referenced pay range is based on JHU APL’s good faith belief at the time of posting. Actual compensation may vary based on factors such as geographic location, work experience, market conditions, education/training and skill level with consideration for internal parity. For salaried employees scheduled to work less than 40 hours per week, annual salary will be prorated based on the number of hours worked. APL may offer bonuses or other forms of compensation per internal policy and/or contractual designation. Additional compensation may be provided in the form of a sign-on bonus, relocation benefits, locality allowance or discretionary payments for exceptional performance. APL provides eligible staff with a comprehensive benefits package including retirement plans, paid time off, medical, dental, vision, life insurance, short-term disability, long-term disability, flexible spending accounts, education assistance, and training and development. Applications are accepted on a rolling basis.

ARM Group LLC is seeking a Civil or Environmental Project Manager with land development experience to join our fast-growing Energy and Power practice. In this role, you will manage development projects for renewable energy installations, working at the intersection of sustainable energy and environmental compliance. The successful candidate will collaborate with our multidisciplinary team of engineers, scientists, geologists, CAD designers, and administrative staff to deliver comprehensive solutions that meet our clients’ energy goals.

As a Project Manager, you will oversee stormwater management design, erosion and sediment control planning, and related land development engineering for solar, wind, and other energy & power projects. You will apply your technical expertise to complete engineering calculations, prepare detailed reports, and develop design drawings using CAD Software. This role requires strong communication skills, as you will regularly interface with regulatory agencies, clients, and internal project teams to ensure project success.

Location: This position can be filled in our Columbia, MD office.

Primary Responsibilities:

· Manage and coordinate the development, design and permitting of multiple projects simultaneously for various projects throughout the Mid-Atlantic region (ARM territory) with a primary focus in Maryland.

· Prepare and review engineering designs and permit applications in order to acquire approvals.

· Maintain complex schedules, develop project timelines, coordinate with subcontractors, and manage people and materials, acting as the direct point of contact for all stakeholders, in order to complete jobs on schedule and within budget guidelines.

· Monitor project work progress, adhering to the scope of work, and communicating with key stakeholders.

· Assess and mitigate project risks; Pro-actively recognize problems and develop effective solutions.

· Perform quality assurance and quality control evaluations and/or check technical calculations and prepare project specifications.

· Prepare detailed models and technical documents to present project design/feasibility findings to stakeholders.

· Evaluate the economic, engineering, or pragmatic feasibility of projects based on site and/or building constraints (i.e., constructability assessment).

Requirements

· Professional Engineer (P.E.) License in Pennsylvania, Maryland, Virginia, or other mid-Atlantic state(s).

· Bachelor's degree or equivalent in engineering (Civil or Environmental) from an accredited four-year college or university.

· 5+ years of experience designing and permitting projects involving land development or land use permitting.

· Experience with stormwater management plans, erosion & sediment control planning and permitting (NPDES).

· Knowledge of State environmental regulations and experience navigating local permitting authorities for zoning, subdivision, and stormwater ordinances.

· Strong organizational and time management skills with proven ability to manage multiple, complex projects.

· Creative and detail-oriented team player with a strong work ethic, self-motivated mindset, and eagerness to grow.

· Ability to communicate effectively verbally and in writing with key stakeholders, including officials and environmental regulators, to exchange information, clearly explain the project goals, obtain permit approvals, coordinate compliance efforts.

· Articulate, confident and able to effectively present information and respond to questions from managers, clients, and the general public.

· Experience managing vendor and client payment terms to achieve positive cash flow by reviewing project billings, accounts receivable, monitoring work in progress preparing client invoices and assisting with payment collection.

· Reasonably proficient in AutoCAD, Hydrocad (or alternate stormwater modeling software), MS Office Suite, and MS Project or equivalent project scheduling software.

Your Wellness, Our Priority: A Look at Our Benefits

We invest in our team's well-being and future through a comprehensive benefits package with a range of offerings designed to support you holistically. Our health and wellness offerings include two Health Insurance options (Traditional PPO and QHDHP with an HSA), vision and dental coverage, life insurance, disability protection, accident and critical illness coverage. To enhance your future financial security, we provide a 401(k) with company match, HSA/FSA accounts, and 529 college savings plans. Work-life balance is prioritized through our generous PTO starting at 15 days per year and 10 paid holidays per year, giving you ample time to rest, recharge, and attend to life outside the office. An Employee Assistance Program is provided to you and your household with resources to assist you in managing a variety of situations. We invest in your professional growth through our Tuition Reimbursement program and continuing education opportunities. After 6 months of employment, all team members become eligible for quarterly bonuses, providing additional avenues for financial growth. This robust package is designed to foster a workplace where you can thrive both personally and professionally, underscoring our dedication to your overall well-being and future success.

Compensation Description:

Project Manager: $92,200-123,000/year, based on experience

• 
  
• Design / Engineering
  
  • 
    
  • Generate design documents for SCADA/Automation projects
    
    • 
      
    • Develop design document narratives
      
    • Perform requirements analysis
      
    • Generate Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field Testing
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor's degree in electrical engineering and 5-7 years field experience
  
• Associate degree in the electrical field and 10 years field experience
  
• High school diploma and 15 years field experience
  
• 5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
  
• Experience in reading electrical and control schematics
  
• Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control and protection systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
  
• Must be a US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

• 
  
• Initiates design documents for small projects and in support of large programs
  
• Develops design documents narratives
  
• Performs requirements analysis
  
• Develops Sequence of Operations / System Functional Documentation
  
• Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
  
• Develops Specifications
  
• Performs QA/QC and technical reviews of designs
  
• Plans and Design Procedures and Equipment for Integrated Systems Factory Testing
  
• Comment Resolution
  

Mechanical-focused controls engineer (BAS/BMS)

• 
  
• Experience on EPMS monitoring
  
• Certifications in Platforms (at least one), familiarity with any others preferred: Ignition, Aveva, Automated Logic, Siemens, Schneider EBO, Niagara N4, Iconics Gen64
  
• Experience with Federal Government controls projects (ICS/EMCS/UMCS) preferred
  
• Familiarity with Cisco network switch programming and design preferred
  

• 
  
• Lead programming / configuration team efforts for complex automation and SCADA applications.
  
• Program / Configure / troubleshoot PLCs, RTUs, and/or HMI systems
  
• Testing / Troubleshooting / Deployment / Commissioning
  
• Author testing / commissioning procedures
  
• Preparation of test reports
  
• Originates test procedures
  
• Commissioning of deployed systems
  
• Development of test equipment and simulation devices
  
• Perform Factory and Field Testing
  

• 
  
• Perform troubleshooting on service calls to existing and legacy system operators
  
• Perform hardware / software upgrades and replacements on existing systems
  

• 
  
• Conducts any surveys, inspections, tours, etc. of client sites, as required
  
• Prepares cost estimates and supporting documents for small projects
  
• Perform hardware / software upgrades and replacements on existing systems
  
• Evaluation and pricing of change orders
  

• 
  
• Assigns technical tasks and coordinates with entry-level engineers
  
• Assigns tasks and coordinates with Technical Staff
  

• 
  
• Experience in reading electrical and control schematics and plans
  
• Experience in control system startup, configuration, and calibration
  
• Experience in testing and troubleshooting control systems
  
• Experience using basic electrical and machinist hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• 3-7 years' experience
  
• Bachelor's degree in engineering or higher
  
• Associate degree (add 3 years)
  
• High school diploma (add 5 years)
  
• Must be a US Citizen
  

• 
  
• Experience in computer networks
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software
  
• Standard Office Software (Microsoft Word, Excel, etc.)
  

• 
  
• Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
  
• Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
  

• 
  
• Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
  
• Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
  
• Design Build Institute of America (DBIA)
  
• Engineer in Training (EIT) in relevant in field
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

Kelly Government Solutions is a strategic supplier and business partner to the federal government and its key suppliers. Through our partnership with the National Institutes of Health, Kelly Government Solutions offers administrative, IT, engineering, scientific, and healthcare professionals the opportunity to work with the leading medical research center in the world. We are seeking an experienced individual to work as a Clinical Research Coordinator at the National Institutes of Health in Baltimore, MD.

The Clinical Research Coordinator provides comprehensive support services to fulfill the operational objectives of the National Institute on Aging. The primary responsibilities involve coordination and oversight of all activities related to medical records, support of clinical operations, participant scheduling, and research data management for the HANDLS study.

Schedule:

Full-Time, Monday-Sunday Variable Schedule- Includes possibility of holidays

Key Duties and Responsibilities:

• Monitor the electronic medical record system to ensure completeness of data collection forms, progress notes, participant information forms, and diagnostic test completion forms.
• Work closely with medical records staff to set priorities based on participant numbers and anticipated workflow.
• Query relational databases and generate individual participant report packages; address technical issues with the HANDLS programming team.
• Audit medical records for compliance, identify errors, ensure timely corrections, and participate in regular chart review meetings with research staff.
• Schedule and confirm appointments for HANDLS MRV visits and out-of-state participants using a custom-designed computerized system; prioritize contact based on appointment availability and likelihood of participant engagement.
• Identify and follow up on missed HANDLS appointments, including contacting participants' families or emergency contacts, assisting with rescheduling, and managing bulk mailings for appointments.
• Conduct initial disability and special needs screening during scheduling calls, evaluating participant needs and notifying HANDLS staff for follow-up.
• Review clinical laboratory results daily via the database, prepare lab reports, ensure physician review within 5-7 days, communicate abnormal results, and prepare alert letters for immediate reporting to participants.
• Prepare charts, data collection forms, and participant materials for clinical staff; coordinate delivery and filing of records and supplies.
• Coordinate support from medical records staff on outreach events (e.g., open houses and community events).
• Attend study meetings, write and annually review operational manual sections, assist with new employee orientation, and participate in mandatory training.
• Enter research data, prepare participant result packets (lab results, health education materials), and coordinate all bulk mailings.

Qualifications:

• Bachelor's degree from an accredited institution required.
• Minimum of 2 years' experience as a Clinical Research Coordinator
• Proficiency with MS Office Suite.
• Ability to work both independently and closely with others.
• Must be able to maintain confidentiality of sensitive data.

Do you have a passion for additive manufacturing (AM)?

Do you have a Maker's attitude for modifying 3D printers to do outstanding things and the persistence and attention to detail to get AM parts through aerospace qualifications?

Do you love to push the bounds of science and technology while working to take on some of the most challenging problems facing our Nation?

If so, we're looking for someone like you to join our team at APL.

We are seeking a Metal Additive Manufacturing Engineer to help us develop new materials and methods and mature these innovative capabilities to produce qualified hardware. You will be a vital member of APL's Additive Manufacturing Center (AMC), within the Research and Exploratory Development Department. The AMC is tasked with leading the implementation of innovative AM materials and processes to meet the future needs of APL staff and our Government sponsors. The AMC also supports APL with specialized prototyping and low-volume production services. As a member of our team, you'll build hardware that explores other planets and interstellar space through various NASA missions as well as building critical prototype hardware for our nation's national security and national health interests. In addition, we provide manufacturing expertise as part of our trusted agent role for the US government.

• Provide engineering support for the operation of the metal AM printers at APL.

• Utilize your fundamental understanding of how the 3D printers work to develop new materials, optimize material properties for unique applications, and develop innovative processes that enable entirely new capabilities in AM.

• Complete build preparation tasks with proficiency in parametric CAD software (e.g., SolidWorks, CREO, etc.), and .stl file editing and build preparation software (e.g., Materialise Magics, EOS Print, QuantAM, etc.).

• Develop unique additive-enabled designs using sophisticated software for lattice generation and topology optimization.

• Utilize AM process simulation tools to identify part geometry at risk for distortion and/or build failure and implement improvements in build orientation and support structure design to minimize build risk.

• Implement Quality Control measures in research and functional prototyping environment.

• Detail AM procedures and implement traceability measures for projects requiring qualification.

• Serve as a domain expert within APL to raise awareness of additive manufacturing activities and vision at APL.

You meet our minimum qualifications for the job if you...

• Have a BS degree or higher in a related engineering or science field.

• 2+ years experience with Metal Additive Manufacturing engineering.

• Have experience running metal AM machines (selective laser melting or directed energy deposition) in an industrial setting.

• Have a high level of proficiency with at least two of the following software tools: parametric CAD (e.g., SolidWorks, CREO, NX), .stl editing software (e.g., Magics, Netfabb, Meshmixer), or build preparation software (e.g., EOSPrint, QuantAM).

• Experience carrying out design of experiments using statistical software such as JMP, DesignExpert, or minitab.

• Technical writing experience authoring and/or being a primary contributor to technical proposal and reports.

• Are able to obtain Secret level security clearance. If selected, you will be subject to a government security clearance investigation and must meet the requirements for access to classified information. Eligibility requirements include U.S. citizenship.

You'll go above and beyond our minimum requirements if you...

• Have experience producing qualified hardware using metal AM, such as following the NASA standard for additive manufacturing spaceflight hardware.

• Have experience designing additive enabled parts using sophisticated lattice generation and topology optimization software tools such as nTopology, Ansys, and Dessault Systems.

Why Work at APL?

The Johns Hopkins University Applied Physics Laboratory (APL) brings world-class expertise to our nation’s most critical defense, security, space and science challenges. While we are dedicated to solving complex challenges and pioneering new technologies, what makes us truly outstanding is our culture. We offer a vibrant, welcoming atmosphere where you can bring your authentic self to work, continue to grow, and build strong connections with inspiring teammates.

At APL, we celebrate our differences of perspectives and encourage creativity and bold, new ideas. Our employees enjoy generous benefits, including a robust education assistance program, unparalleled retirement contributions, and a healthy work/life balance. APL’s campus is located in the Baltimore-Washington metro area. Learn more about our career opportunities at   

All qualified applicants will receive consideration for employment without regard to race, creed, color, religion, sex, gender identity or expression, sexual orientation, national origin, age, physical or mental disability, genetic information, veteran status, occupation, marital or familial status, political opinion, personal appearance, or any other characteristic protected by applicable law. APL is committed to providing reasonable accommodation to individuals of all abilities, including those with disabilities. If you require a reasonable accommodation to participate in any part of the hiring process, please contact 

The referenced pay range is based on JHU APL’s good faith belief at the time of posting. Actual compensation may vary based on factors such as geographic location, work experience, market conditions, education/training and skill level with consideration for internal parity. For salaried employees scheduled to work less than 40 hours per week, annual salary will be prorated based on the number of hours worked. APL may offer bonuses or other forms of compensation per internal policy and/or contractual designation. Additional compensation may be provided in the form of a sign-on bonus, relocation benefits, locality allowance or discretionary payments for exceptional performance. APL provides eligible staff with a comprehensive benefits package including retirement plans, paid time off, medical, dental, vision, life insurance, short-term disability, long-term disability, flexible spending accounts, education assistance, and training and development. Applications are accepted on a rolling basis.

Overview:

"Together We Make Life Better". Our quality engineering, sustainable solutions and safety record inspire everything we do. Our diverse and inclusive workforce allows all employees to feel valued and safe to give their opinions and improve our company.

Tata Consulting Engineers USA, LLC, (TCE), is a multi-disciplinary engineering organization offering a full range of integrated engineering design, project support, procurement and construction management services to the energy and chemicals industries.

Position Summary:

Short term assignment located in the Curtis Bay, Maryland area.

Assignment start date ASAP to prepare for May 2026 shut down.

This role will travel to work site in Curtis Bay area to assist with coordination of operations and maintenance to prepare for upcoming shutdown.

Responsibilities:

Work with Maintenance, Operations, Turnaround Event Team Leader, Turnaround Team, General Contractor and other diverse groups to ensure all phases of the turnaround life cycle are managed in compliance with both Turnaround Management Process (TMP) and Project Management best practices.

Manage all aspects of planning, scheduling and execution of assigned capital and expense projects.

Drive implementation of a best practice Cost Breakdown Structure. Monitor actual vs. budget.

Drive implementation of a best practice Work Breakdown Structure.

Monitor progress in all TMP phases vs. milestones.

Develop project overview presentations for site and senior leadership.

Act as the bridge to upper management by reporting regularly on the progress versus milestones, schedule and cost.

Define and challenge critical path for opportunities to reduce duration and cost.

Develop contingency plans to minimize risk and uncertainty.

Ensure construction resources for engineering and expense projects are deconflicted.

Participate in and conduct scope and project reviews for assigned projects to identify issues/risks that could negatively impact cost and duration and manage development of mitigation plans.

Drive processes to manage scope change and discovery work.

Implement project workflow utilizing both internal and external resources to allow efficient execution of all work assigned, inclusive of both capital and expense work.

Meet all Key Performance Indicators (KPIs) including safety and environmental compliance.

The position reports directly to the Site Director and worlds directly with the Sr. Maintenance Manager, Turnaround Team Leader, Turnaround Team and General Contractor.

Regular presence in the workplace is required including the ability to work extra hours if needed.

Must be able to work collaboratively with team members with different backgrounds and perspectives.

Follow instructions and perform other duties as may be assigned.

Ability to ask penetrating questions in a diverse work environment while maintaining a collaborative work environment with team members.

Qualifications:

Previous experience with plant shut down operations and maintenance.

Prior experience with planning and managing shut down operations.

Fit for in plant assignment.

EEO Statement:

Tata Consulting Engineers USA, LLC ("TCE") is an equal opportunity and affirmative action employer committed to promoting diversity, equity, and inclusion in our workplace. We do not discriminate on the basis of race/ethnicity, national origin, religion, age, color, sex, sexual orientation, gender identity, disability, veteran's status, or any other characteristic protected by local, state, or federal laws, rules, or regulations.

In compliance with federal law, all candidates hired will be required to verify their identity and eligibility to work in the United States and to complete the required employment eligibility verification form after acceptance of a formal TCE offer letter through our onboarding system.

Fraud Alert:

Please be aware that there have been instances of fraudulent job offers being made in the name of TCE by unauthorized individuals or organizations. We want to make it clear that TCE will never ask for any type of payment information during our interview process. Please be advised during our company transition, all email communications from TCE will come from our business email addresses, which end in '@'. If you receive any suspicious job-related emails from any other domain, please do not respond to them and disregard any requests for personal or financial information. If you have any concerns about the legitimacy of a job offer or communication, please contact us through our

Are you passionate about solving real-world network engineering challenges?

Do you want to perform advanced research, development, and test & evaluation of ground breaking communications systems and technologies?

If so, we want you to join our innovative team of engineers solving some of the most complex and evolving networking challenges.

We’re looking for a versatile Networking Orchestration Engineer who thrives in a mission-driven environment and is excited to contribute to the development of operational prototypes and specialized network capabilities.

• Research and experiment with emerging networking technologies to implement real-world, practical communications systems and capabilities to address a variety of evolving operational needs.
• Design, build, and orchestrate large scale virtualized networking environments using both on-prem and cloud services in order to implement threat-representative network environments tailored for unique missions.
• Collaborate directly with sponsors and collaborators to understand their toughest networking challenges and craft effective solutions.

You meet the minimum qualifications for this position if you...

• Have a Bachelor’s degree in Computer Science, Computer Engineering, Network Engineering, Information Systems, or a closely related technical field.
• Have at least five years of relevant experience in advanced network engineering and software automation, including software-defined networking, cloud infrastructure, observability, and modern routing/virtualization technologies.
• The ability to obtain an Interim Top Secret level security clearance by your start date and can ultimately obtain a Top Secret level clearance. If selected, you will be subject to a government security clearance investigation and must meet the requirements for access to classified information. Eligibility requirements include U.S. citizenship.

• Have the ability to be a creative networking guide who flourishes with solving tough, undefined problems by applying unique and innovative approaches.
• Are able to design, build, and test practical, working solutions from the ground up using your deep knowledge and experience in:
  • Building software solutions that enhance network orchestration, automate complex workflows, and provide deep insight through traffic analysis
  • IP networking fundamentals (layers 2 and above)
  • Linux networking (IP stack, routing, iptables, network namespaces, etc.)
  • Hybrid Cloud infrastructure automation (Terraform, Packer)
  • Configuration management and automation(Ansible, Puppet, Chef, Salt)
  • Containers, and orchestration (Docker, Kubernetes)
  • GitOps workflows and CI/CD pipelines (GitLab CI, Jenkins)
  • Python or languages applied to network automation and tool development
  • Software Defined Network (SDN) and/or Software Defined WAN (SD-WAN) technologies
  • Network virtualization and overlay technologies (VXLAN, EVPN, MPLS, segment routing)
  • Routing and switching protocols (BGP, OSPF, IS-IS, STP, etc.)
  • Network telemetry and observability (NetFlow, SNMP, Prometheus, Grafana, ELK)
  • Design and Integration of Network APIs and interfaces (NETCONF, RESTCONF, gRPC)
  • Virtual networking and NFV concepts (vRouters, vSwitches, service chaining, CORE, GNS3)
  • Network Traffic generation and analytics
• Take initiative and thrive in a collaborative, problem-solving environment.
• Are passionate about national security, networking innovation, and making a real-world mission impact.

#LI-AG1

Why Work at APL?

The Johns Hopkins University Applied Physics Laboratory (APL) brings world-class expertise to our nation’s most critical defense, security, space and science challenges. While we are dedicated to solving complex challenges and pioneering new technologies, what makes us truly outstanding is our culture. We offer a vibrant, welcoming atmosphere where you can bring your authentic self to work, continue to grow, and build strong connections with inspiring teammates.

At APL, we celebrate our differences of perspectives and encourage creativity and bold, new ideas. Our employees enjoy generous benefits, including a robust education assistance program, unparalleled retirement contributions, and a healthy work/life balance. APL’s campus is located in the Baltimore-Washington metro area. Learn more about our career opportunities at   

All qualified applicants will receive consideration for employment without regard to race, creed, color, religion, sex, gender identity or expression, sexual orientation, national origin, age, physical or mental disability, genetic information, veteran status, occupation, marital or familial status, political opinion, personal appearance, or any other characteristic protected by applicable law. APL is committed to providing reasonable accommodation to individuals of all abilities, including those with disabilities. If you require a reasonable accommodation to participate in any part of the hiring process, please contact 

The referenced pay range is based on JHU APL’s good faith belief at the time of posting. Actual compensation may vary based on factors such as geographic location, work experience, market conditions, education/training and skill level with consideration for internal parity. For salaried employees scheduled to work less than 40 hours per week, annual salary will be prorated based on the number of hours worked. APL may offer bonuses or other forms of compensation per internal policy and/or contractual designation. Additional compensation may be provided in the form of a sign-on bonus, relocation benefits, locality allowance or discretionary payments for exceptional performance. APL provides eligible staff with a comprehensive benefits package including retirement plans, paid time off, medical, dental, vision, life insurance, short-term disability, long-term disability, flexible spending accounts, education assistance, and training and development. Applications are accepted on a rolling basis.