Engineering Standards List Jobs in Usa
12,422 positions found — Page 2
Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.
We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Job DescriptionThe Boeing Commercial Airplanes Liaison Engineering Organization is seeking Consultant (Level 5) Liaison Engineers to support operations in Everett, Seattle, Auburn, and or Renton Washington .
We are looking for a proactive individual who can make prompt engineering decisions and who want to go beyond their desk and into the factory for hands on engineering.This position requires excellent communication and collaboration skills as the candidate will be partnering closely with production personnel.
The candidate will be the engineering representative on the factory floor transforming design into reality.Position Responsibilities:Analyzes, conducts root cause analysis and develops dispositions for production non-conformances.Applies knowledge of Boeing design principles to assess and resolve product/process issues through the product lifecycle.Applies engineering principles to research technical, operational and quality issues in support of executing final engineering solutions.Identifies documents, analyzes reported problems and communicates deviations that could impact design intent and safety; recommends and manages resolution.Develops and implements product/process improvements.Supports Integrated Product Teams (IPT) and participates in design reviews.Represents the engineering community from initial build through the production and post-production environment.Ensures supplier and build partner compliance with Boeing standards.Develops customer correspondence for continued safe operation and maintenance of equipment.Participates in on-site disabled product repair teams, accident investigation and support teams.Analyzes damage repair or structural modification to determine appropriate jacking and shoring, prevent collateral damage and assure a safe work environment.Designs interim structural repairs and conducts static strength analysis.Develops non-destructive test procedures, tools and standards.This position is fully onsite.
The selected candidate will be required to work onsite at one of the listed locations.
This position involves daily exposure to factory environment which includes stairs, trip hazards, high noise areas, chemical hazards (breathing and handling), and entering airplanes during their many stages of build.This position participates in the approximately 9-month Boeing Company Training Rotation Program, which may involve assignments to the first, second, or third shift, as well as weekend or daily overtime.
The specific requirements for shift assignments and overtime vary between sites and are typically covered on a rotation basis.
Additionally, there may be travel involved between Boeing Puget Sound sites during the training rotation.Basic Qualifications (Required Skills/Experience):Bachelor's or Masters of Science Degree from an ABET OR ABET equivalent accredited course of study in Engineering14+ years of experience in structures, systems, design, or production engineeringPreferred Qualifications (Desired Skills/Experience):Hands-on experience with materials and manufacturing processes.Prior BCA Engineering Material Review Board (MRB) CertificationConflict of Interest:Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment processDrug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Shift:This position is for multiple shifts and may require off shift, weekend, and travel assignments.The candidate may periodically be assigned to first, second, or third shift as well as weekend or daily overtime.
This requirement varies from site to site and is typically covered on a rotation basis.Union:This is a union represented position.In locations where SPEEA representation applies, this job family will be covered by the terms of the collective bargaining agreement.
Applicable and appropriate educational/certification credentials from an accredited institution and/or equivalent experience is required.Pay and Benefits:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range for Expert (level 5): $165,750
- $224,250 Applications for this position will be accepted until Mar.
20, 2026Export Control Requirements:This position must meet U.
S.
export control compliance requirements.
To meet U.
S.
export control compliance requirements, a "U.
S.
Person" as defined by 22 C.
F.
R.
§120.62 is required.
"U.
S.
Person" includes U.
S.
Citizen, U.
S.
National, lawful permanent resident, refugee, or asylee.Export Control Details:US based job, US Person requiredRelocationThis position offers relocation based on candidate eligibility.Visa SponsorshipEmployer will not sponsor applicants for employment visa status.ShiftThis position is for 1st shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
*At Securian Financial the internal position title is Infrastructure Dir."
Mission
"To lead the engineering discipline that ensures Securian's technology platforms and cloud services are built and operated with uncompromising resilience, performance, and quality. This role drives the design and automation of fault-tolerant, high-availability architectures across AWS, Azure, and GCP-ensuring the enterprise meets resiliency, scalability, and efficiency expectations at every layer of technology."
Positioning
The Director of Resilience Engineering and Quality Leader is both a strategic peer and technical counterpart to the Infrastructure & Reliability Engineering Leader.
This role provides bench depth and succession coverage for REO's most technically complex domains while driving innovation in reliability, resilience, and performance practices.
Strategic influence: Shapes cloud reliability, quality engineering, and resilience strategy across REO and Architecture domains.
Operational authority: Leads Sr. Managers and Managers who own the execution of quality, resilience, and performance engineering capabilities.
Enterprise collaboration: Works hand-in-hand with Technology, Solution, Business, Data, and Enterprise Architects to embed reliability and resilience as core architecture principles.
Scope of Accountability
Resilience Engineering & Cloud Reliability
Architect and validate fault-tolerant, regionally resilient architectures across AWS, Azure, and GCP.
Own resilience automation, chaos testing, and IaC-based recovery validation.
Lead cross-cloud reliability design reviews and failure-mode analyses for critical systems.
Quality Engineering & Continuous Testing
Define enterprise-wide quality engineering strategy integrated into CI/CD pipelines.
Drive automation-first testing (functional, non-functional, performance, resilience).
Embed observability-driven quality validation and contract testing across services.
Performance, Capacity & Efficiency Engineering
Oversee predictive capacity planning, scaling automation, and cost/efficiency optimization (FinOps/GreenOps).
Partner with Platform & Infrastructure teams to tune performance across application and platform layers.
Measure and report on performance SLIs/SLAs aligned to REO's Reliability Metrics framework.
Cross-Domain Architecture Collaboration
Partner with Enterprise Architects to codify resilience and reliability standards in technology blueprints.
Collaborate with Technology & Solution Architects to design service reliability into delivery architectures.
Engage Data Architects for data resilience, replication, and pipeline reliability.
Work with Business Architects to align technical reliability goals with critical business outcomes.
Leadership & Talent Development
Lead a team of Sr. Managers and Managers, fostering a high-performance, hands-on engineering culture.
Build and mentor top-tier technical talent in cloud reliability, resilience, and quality automation.
Partner with HR and REO Enablement to develop succession plans and technical competency frameworks.
Core Technical Competencies
AWS (primary) - Multi-account design, HA architecture, region failover, resilience automation, Terraform/CDK/CloudFormation.
Azure & GCP (secondary) - Compute, networking, and reliability constructs; hybrid cloud design and failover integration.
Infrastructure as Code (IaC) - Deep proficiency in Terraform, policy-as-code (OPA/Conftest), drift detection, pipeline integration.
Reliability & Chaos Engineering - AWS Fault Injection Simulator, Gremlin, steady-state hypothesis design.
Observability & Quality Automation - OpenTelemetry, Prometheus, CloudWatch, K6, Gatling; CI/CD quality gates and dashboards.
Performance Engineering - Load, stress, and soak testing automation; performance profiling and SLO alignment.
Disaster Recovery Automation - Cross-region orchestration, IaC-driven DR runs, replication validation.
FinOps/GreenOps - Cloud cost and efficiency automation, carbon-aware scaling policies.
Leadership Competencies
Strategic Technical Leadership: Operates at the intersection of deep engineering and executive strategy.
Multi-Domain Collaborator: Integrates reliability and resilience across architecture, operations, and business domains.
Talent Multiplier: Develops and empowers senior managers, fostering engineering mastery and innovation.
Credible Technical Authority: Trusted peer to Infrastructure & Reliability Engineering; capable of leading architecture reviews and executive briefings.
Change Champion: Drives transformation of reliability practices across platforms, pipelines, and teams.
Qualifications & Experience
12+ years in cloud engineering, reliability, or platform leadership roles.
5+ years leading Sr. Managers/Managers in technical domains.
Proven expertise across AWS, with working knowledge of Azure and GCP.
Experience with multi-cloud governance, DR design, IaC at scale, and reliability automation.
Strong understanding of observability, SRE principles, and REO/ITIL-aligned reliability frameworks.
Certifications:
Required: AWS Certified Solutions Architect - Professional
Preferred: AWS DevOps Engineer, Azure Solutions Architect Expert, Google Professional Cloud Architect
Success Metrics
99.9% availability maintained for Tier-1 workloads.
100% coverage of DR automation for Tier-1 services.
25% annual increase in automated quality/test coverage.
15% annual improvement in resource efficiency and cost performance.
Documented resilience participation across all enterprise architecture blueprints.
Positive "technical peer readiness" and succession rating from Head of REO.
Summary Value Proposition
This Director role blends deep AWS reliability engineering expertise, multi-cloud technical breadth, and leadership scale.
It ensures REO maintains both technical depth and leadership redundancy, and it strengthens the bridge between engineering execution and enterprise architecture alignment.
#LI-hybrid **This position will be in a hybrid working arrangement.**
Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes), you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.
The estimated base pay range for this job is:
$145,000.00 - $267,000.00Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.
Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:
Paid time off:
We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.
Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.
Holidays: Securian provides nine company paid holidays.
Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.
Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.
Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.
Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:
Mental Wellness and Disability
Pride at Securian Financial
Securian Young Professionals Network
Securian Multicultural Network
Securian Women and Allies Network
Servicemember Associate Resource Group
For more information regarding Securian's benefits, please review our Benefits page.
This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.
Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).
To view our privacy statement click here
To view our legal statement click here
Remote working/work at home options are available for this role.
Town of Lexington
We are currently accepting applications for the following part-time (25hrs/wk) position:
Engineering Aide
Department of Public Works
Anticipated Hourly Range: $30.47 - $34.77
with excellent benefits
The REQUIRED Town of Lexington application form must be received in the Town's Human Resource
Department. This position is open until filled
Summary
Performs engineering tasks for Department of Public Works/Engineering department. Reviews and approves
building and issues engineering permits. Oversees and enforces Town specifications. Reviews credentials and
licenses of new contractors. Updates websites, including posting construction progress, road closures and
schedules, Town policy, and infrastructure issues. Ensures compliance with Massachusetts DEP. Monitors and
tracks private projects. Performs all other related work, as required.
Essential Functions
The essential functions or duties listed below are intended only as illustrations of the various types of work that
may be performed. The omission of specific statements of duties does not exclude them from the position if the
work is similar, related, or a logical assignment to the position.
* Reviews and approves building permits. Reviews, approves, and issues Engineering permits. Oversees and
enforces Town specifications. Maintains Engineering permit portal, including changing, editing, and adding
applications. Reviews credentials and provides licenses to new contractors.
* Updates websites, including posting construction progress, road closures, schedules, Town policy, and
infrastructure issues.
* Ensures compliance with Massachusetts DEP permitting.
* Monitors and tracks private projects. Communicates project updates to customers, via email, website and
social media. Sets up and attends project meetings.
* Provides and coordinates communication to residents and businesses on major capital projects.
* Attends meetings on projects. Administers and provides support materials for projects.
* Communicates with department staff.
* Meets with builders to review requests and concerns.
* Responds to questions and requests for information, including Public Records Requests.
* Researches records and plans for residents, external engineers, and surveyors.
* Conducts research on Middlesex Registry of Deeds, examining the history of property.
* Manages Engineering records.
* Communicates with the Secretary of the Commonwealth on records retention regulations.
* Manages and deposits revenue from permits. Reconciles and submits cash turnover report.
* Participates in personnel decisions, including interviewing job applicants.
* Continues education and career development by participation in association events.
* Reads and interprets Town Bylaws. Writes proposal to change bylaws. Writes and reviews Town policy for
accreditation.
* Provides training on VPC Opengov. software, records retention, and the department's organizational plans.
* Performs other similar or related duties, as required or as situation dictates.
Supervision
Supervision Scope: Performs varied and responsible functions requiring a technical working knowledge of
departmental operations and the exercise of judgment and initiative, particularly in situations not clearly defined
by precedent or established procedures.
Supervision Received: Works under the broad supervision of the Town Engineer, following department rules,
regulations and policies; duties require the ability to plan and perform operations and independently complete
assigned tasks, according to prescribed time schedules.
Supervision Given: None.
Recommended Minimum Qualifications
Education, Training and Experience
Associates degree or equivalent, plus 5+ years of experience in a municipality or Civil Engineering firm or an
equivalent combination of education, training and experience are required. Computer literacy is required. FE or
PE is preferred. Ability to operate CAD is preferred. Public speaking experience is highly desirable. Bachelor of
Science in Civil Engineering is preferred.
Special Requirements:
Valid Massachusetts Driver's license is required.
Knowledge: Familiarity with Civil Engineering practices. Knowledge and ability to read and generate design
plans. Knowledge of administrative office practices and procedures. Knowledge of project management.
Knowledge of financial record keeping. Familiarity with town government. Knowledge or ability to learn new
technology quickly. Knowledge of federal, state, and local laws and regulations required for department
operations. Knowledge of mathematical functions to handle money and assign counts to deposits. Knowledge to
reconcile on-line payments. Knowledge of budgeting and accounting. Knowledge to conduct thorough reviews
of contractor's backgrounds. Advanced and broad knowledge of technical aspects of Contractors' services.
Knowledge to determine impacts of developments, including flooding concerns.
Ability: Ability to field questions and administer capital municipal Civil Engineering projects, including
utilities, buildings, paving and road projects. Ability to read and interpret legal documents. Ability to interact
appropriately and tactfully with customers. Ability to develop and demonstrate an understanding of regulations.
Ability to maintain detailed and accurate records. Ability to learn and explain Department regulations, rules,
policies, and procedures. Ability to work independently. Ability to follow detailed timetables. Ability to multi-
task. Ability to maintain confidentiality. Ability to work effectively in a team environment.
Skills: Proficient customer service and organization skills. Proficient written and verbal communication skills.
Excellent presentation skills. Proficient computer skills with MS Office Suite applications. Proficient skills with
new and existing computer and software applications supporting departmental operations, including GIS,
database management programs, permitting systems, and website editing.
Job Environment
* Work is performed in office environment. Work is performed occasionally in outdoor weather
conditions, in very loud to moderate noise levels, working in high, precarious places, with fumes or
airborne particles present, and working near moving mechanical parts. Work is subject to fluctuations,
and administrative deadlines. Work is conducted in an environment of competing priorities.
* Operates computer, printer, telephone, copier, facsimile machine, and all other standard office
equipment.
* The employee has constant contact with the public, contractors, and utility companies.
* The employee has access to confidential information.
* Errors could result in delays or loss of service, monetary loss, injuries to other employees, and legal
ramifications.
Physical Requirements
The physical demands described are representative of those that must be met by an employee to successfully
perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with
disabilities to perform the essential functions.
While performing the duties of this job, the employee is required to sit, communicate, or hear, and use hands to
finger, handle or feel. Frequently the employee is required to stand, climb or balance, reach with hands and
arms, and stoop, kneel, crouch, or crawl. Occasionally the employee is required to walk, and taste or smell. The
employee must occasionally lift and/or move objects weighing up to 10 pounds. The employee seldom must lift
and/or move objects weighing up to 30 pounds. Close, distance, color, and peripheral vision are required.
Vision and hearing at or correctable to normal ranges is necessary. This position requires the ability to operate a
keyboard at efficient speed. This position requires the ability to operate an automobile.
This job description does not constitute an employment agreement between the employer and employee, and
is subject to change by the employer, as the needs of the employer and requirements of the job change.
Pay Equity/Equal Opportunity/Americans with Disabilities Act Employer
APPLICATION PROCESS
All applicants are required to complete a Town application form, available from the Internet at
, emailing , calling or by visiting the Human
Resources Department. Resumes may be attached to the application form as additional information, but
cannot serve as a substitute for completing the required application form.
Pre-employment physical including drug screening is a condition of employment.
The Town reserves the right to modify the application deadline, and/or accept applications after the deadline, to
best serve the interest of the community.
After the deadline all applications will be reviewed and the most highly qualified candidates will be invited to
one or more interviews. All applicants will be notified of their standing in the process as soon as a decision has
been made regarding their individual application.
Individuals who need accommodations in order to participate in this process should contact the Human
Resources Department.
Questions regarding this hiring process should be addressed to the:
Human Resources Department
Town of Lexington
1625 Massachusetts Avenue
Lexington, MA 02420
Engineered Facades is a high-value provider of architectural building exteriors. Our knowledgeable, dedicated associates work professionally with an exclusive group of vendors and customers in an environment built on commitment and trust.
Job Description
The Design Manager position at Engineered Facades reports directly to the Director of Design and Engineering. The Design Manager coordinates and exercises functional planning, organization, control, integration and completion of engineering projects within the area of assigned responsibility.
- Manages the draftsmen and schedules their work.
- Reviews design for compliance with engineering principles, company standards and contractual requirements, and related specifications.
- Coordinates activities concerned with technical developments, scheduling and resolving engineering design challenges.
- Reviews drawings, specifications and related data for accuracy and completeness.
- Performs technical reviews of shop drawings, FAB tickets and construction administration submittals to ensure air, water, thermal, and structural performance
- Coordinates façade calculations with third party engineering firm.
- Analyze structural integrity on basic wall systems without involving third party engineering firm
- Collaborates with and provide production support to the architectural drafters
- Works with QA to resolve issues with engineering design problems
- Uses computer assisted design/drafting equipment and software to develop designs.
- Creates fab tickets and cut lists for projects
- Develops design solutions to fit within budget and timeline
Requirements
Bachelor’s degree in Civil Engineering, Structural Engineering or Mechanical Engineering or Building Construction Management or related degree and at least five- ten years’ experience in the construction industry. Other skill sets for this position include:
- Excellent communication skills and organizational skills
- Knowledge of construction principles, techniques and procedures
- Proven ability to manage multiple projects and meet deadlines in a timely fashion
- Strong interpersonal skills and able to work in a team environment
- Construction related software program knowledge including: Auto-CAD and Autodesk Inventor
- Experience in Sketch Up
- Ability to sketch rough layouts, details and computes angles, weights, surface areas, dimensions, radii, clearances, tolerances, etc.
- Strong organizational and problem solving skills.
- Proficient mathematical skills.
- Proficient use of Microsoft Office Suite.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
Job Summary -- Essential Functions/Duties Under close supervision of a technical lead or unit supervisor, an Engineering Technician I performs a variety of basic or routine tasks during the installation, maintenance, repair, troubleshooting, calibration, testing, fabrication, construction, and operation of diverse electronic/mechanical equipment and systems.
Employee will be responsible to perform the following functions/duties: Support production of technical documents and drawings Research technical issues for input to reports and studies Maintain filing systems, databases, and logs for tracking project status and inventory Assist work unit personnel as the on-site customer interface for equipment/system installation, testing, fabrication, and other engineering tasks Comply with engineering documentation standards, engineering plans, system specifications, and test procedures Use established policies and procedures and limited subject matter knowledge to complete relatively simple assignments of moderate complexity that vary in nature and sequence Apply technical knowledge of electronic principles to solve basic problems using diagrams, schematics, engineering data, and test equipment Manipulate computer keyboards and view and interpret computer displays Perform other job-related duties, as required.
Requirements -- Education, Technical, and Work Experience A high school diploma or GED equivalent is required for this position.
In addition, an Engineering Technician I must possess the following qualifications: Hands-on experience performing tasks related to the work unit is desired.
Basic working knowledge of computer systems and integrated software application programs Ability to take direction from senior unit personnel and work under deadlines Good communication and analytical skills Planning/organizational skills.
Salary The Area Wage Determination (AWD) for this position is $27.00 per hour.
Benefits Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement Other Responsibilities Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
Working Conditions Work is performed in a typical office environment with no unusual hazards.
Occasional lifting (up to 20 pounds), constant sitting with occasional use of computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness are required.
Work is performed both indoors and outdoors.
Outdoor duties may be performed on even or uneven surfaces, which may be dry or wet.
Grease or oil may be found on working surfaces.
Outdoor duties may be performed on gravel or shingled roof.
Climbing stairs, ladders, towers, and scaffolds, and the ability to lift up to 50 lbs., (anything heavier requires two or more people or mechanical assistance) are required.
A government vehicle is used on an as-needed basis.
Travel to remote company work locations may be required.
Disclaimer The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JENG17; A2NTTR
The Software Certification Engineer is a cornerstone of Boeing's unwavering commitment to safety and excellence in aviation. This role is crucial in ensuring that our aircraft not only meet the regulatory standards set by the FAA but also embody the highest levels of safety and reliability. By partnering closely with the FAA, the Software Certification Engineer will help shape the future of aviation, driving innovation while safeguarding the trust of our customers and the flying public.
Join us in our mission to connect, protect, explore, and inspire the world through aerospace innovation. Lead and manage a team of engineers focused on the design, analysis, and testing of aircraft systems and components, with an unwavering commitment to safety.
Cultivate a safety-first mindset within the engineering unit, ensuring that all engineering practices prioritize the well-being of passengers and crew.
Collaborate closely with the FAA to navigate the complex certification process, ensuring that all aircraft designs comply with stringent regulatory requirements and safety standards.
Develop and implement engineering strategies that emphasize safety and reliability, aligning with Boeing’s commitment to delivering the highest quality aircraft.
Serve as the primary liaison for FAA representatives, facilitating transparent communication and collaboration throughout the certification journey.
Oversee the preparation and submission of comprehensive technical documentation required for FAA certification, ensuring that all materials reflect the highest standards of accuracy and thoroughness.
Analyze and resolve complex engineering challenges with a focus on safety, leveraging data-driven decision-making and industry best practices.
Monitor project progress and performance, ensuring that engineering solutions are delivered on time and meet all safety and certification milestones.
Citizen, lawful permanent resident, refugee, or asylee.
Bachelor's Degree
~9+ years of experience in RTCA DO-178(B/C) Software Considerations in Airborne Systems and Equipment Certification
~5+ years’ experience in software engineering
Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science
~12+ years related work experience or an equivalent combination of education and experience
~ Experience with concurrent software and distributed systems
~12+ years’ experience in software development life cycles, configuration management and best agile software engineering practices
~9+ years’ experience developing, documenting and maintaining architectures, requirements, algorithms, interfaces and designs for software systems
~9+ years’ experience leading software development projects
~ Leads activities to develop, document and maintain architectures, requirements, algorithms, interfaces and designs for software systems
~ Leads development, selection, tailoring and deployment of processes, tools and metrics
~ Experience using common software version control tools such as Git
~ Experience with Agile planning tool such as JIRA, TSF
Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union : This is a union-represented position
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
Applications for this position will be accepted until Mar. Citizen, U.National, lawful permanent resident, refugee, or asylee.
Bachelor's Degree or Equivalent Required
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We're seeking a knowledgeable and detail-oriented Heat Treat Process Engineering Supervisor to lead and support all aspects of the heat treatment operations with a focus on quality, compliance, and continuous improvement.
POSITION SUMMARY:
The Heat Treat Process Engineering Supervisor serves as a technical expert responsible for ensuring the proper thermal processing of materials to meet metallurgical and production requirements meeting all CQI-9 requirements. This role includes overseeing furnace operations, audits, documentation, process control, equipment maintenance, and continuous improvement initiatives.
The ideal candidate will have strong metallurgical knowledge, heat treat process experience, the ability to troubleshoot equipment and process issues, and the ability to manage compliance in a dynamic manufacturing environment. This role has direct supervisory responsibility for Lab Technicians, including scheduling, performance management, training, and ensuring compliance with laboratory testing standards and metallurgical validation requirements.
ESSENTIAL DUTIES (Complete):
- Oversee and manage daily heat treat operations including carburizing, hardening, tempering, and stress relieving
- Ensure compliance with AIAG CQI-9: Heat Treat System Assessment (HTSA) and other applicable standards
- Implement and maintain heat treat process control plans per AIAG guidelines
- Conduct and lead CQI-9 self-assessments, audits, and ensure closure of gaps and non-conformances
- Ensure proper setup, calibration, and operation of furnaces and quench systems
- Monitor thermal cycles and maintain control charts, pyrometry data, and process records per CQI-9
- Support system accuracy tests (SAT), temperature uniformity surveys (TUS), and instrumentation calibration activities
- Ensure all documentation meets internal and customer-specific AIAG compliance requirements
- Collaborate with Engineering, Maintenance, and Quality to address process improvements and problem-solving
- Perform metallurgical inspections including hardness testing and microstructure verification
- Provide technical guidance to operators and maintenance personnel on best practices
- Develop and optimize heat treat process parameters including atmosphere control, quench severity, and thermal cycle design to meet metallurgical and dimensional requirements
- Atmosphere verification (Carbon Potential, Dew Point, etc.)
- Distortion Mitigation Strategy
- Develop, implement, and maintain training programs to ensure team competency on heat treat systems and compliance
- Lead root cause analysis and corrective action efforts for heat treat-related non-conformities
- Utilize Lean Six Sigma principles to drive cost reduction, efficiency, and quality improvements
- Maintain proper traceability and process documentation for internal and external audits
- Provide technical direction for furnace troubleshooting, repair validation, and upgrade initiatives in coordination with Maintenance
- Perform other duties as assigned or required in support of production and quality goals
- Directly supervise Lab Technicians, including daily work assignments and workload balancing
- Approve timecards, PTO, and manage attendance
- Perform other duties as assigned or required in support of production and quality goals
CORE COMPETENCIES:
- Action oriented: Demonstrates ownership in solving process and compliance issues
- Self-Motivated: Demonstrates ability to take initiative and drive to achieve results. Proactively drives conformance with CQI-9 requirements and continuous improvement
- Accountability: Demonstrates ability to take responsibility and maintains sense of ownership and follow through on commitments. Sets high standards of performance.
- Communication: Demonstrates ability to convey and distribute information effectively and encompass strong speaking, presentation, written and listening skills. Ability to create an environment for open communication, and communicates clearly across departments regarding heat treat and compliance status
- Teamwork: Demonstrates ability to work well with others to accomplish common goals and build a positive climate and trusting relationships within teams.
- Leadership: Demonstrates ability to give direction, motivate, manage and reward performance, provide constructive feedback and foster individual professional development. Trains and guides operators to follow standard operating procedures and compliance guidelines
- Reliability: Demonstrates dependability, accountability and trust. Follows processes and meets commitments. Delivers consistent process performance and regulatory documentation
- Decision-making: Demonstrates ability to discover opportunities in challenges, seek profit and sustainable growth, make courageous while sound decisions and demonstrate a good business understanding. Applies analytical skills and CQI-9 knowledge to make data-driven decisions
KNOWLEDGE, SKILLS & ABILITIES:
- Thorough understanding of heat treatment principles, metallurgy, and thermal processing equipment
- Working knowledge of CQI-9 audits, checklists, gap closures, and AIAG documentation practices
- Familiarity with control system troubleshooting, PLCs, HMIs, and data logging
- Ability to supervise, mentor, and train heat treat personnel on compliance, safety, and process controls
- Skilled in conducting microstructure analysis and hardness testing to validate process results
- Strong organizational and record-keeping skills for always maintaining audit-readiness
- Proficiency in Lean Manufacturing, 5S, and Continuous Improvement
- Physically capable of working in a high-temperature, industrial environment
- Commitment to upholding process integrity and product conformance to specification
WORKING ENVIRONMENTAL CONDITIONS:
- Work involves exposure to high-temperature equipment, hot surfaces, and industrial environments. May encounter fumes, noise, and moving machinery. Personal protective equipment (PPE), including heat-resistant gloves, face protection, and hearing protection, is required. Occasional exposure to quenchants, chemicals, and elevated platforms is expected. Safety training and environmental awareness are critical components of the role.
SUPERVISORY RESPONSIBILITY:
- This role has direct supervisory responsibilities.
The demands described here represent those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions.
QUALIFICATIONS:
- Bachelors degree in Mechanical, Materials, Metallurgical, or Manufacturing Engineering required.
- Materials Science or Metallurgical Engineering preferred
- 7+ years of hands-on heat treat or metallurgical experience, preferably in automotive or aerospace manufacturing
- Demonstrated knowledge and application of CQI-9 Heat Treat System Assessment requirements
- Familiarity with AIAG standards and automotive core tools (APQP, PPAP, FMEA, SPC, MSA)
- Experience conducting and documenting SAT, TUS, and other pyrometry-related activities
- Experience operating batch and continuous furnaces, quench systems, and thermal processing equipment
- Demonstrates ability to directly supervise lab personnel including assigning work, evaluating performance, managing corrective actions, and developing team capabilities.
- Creates accountability, enforces standards, and drives measurable performance improvements.
- Proficient in hardness testing, blueprint reading, GD&T, and metallurgical inspection techniques
- Strong computer skills including Microsoft Office and plant data collection systems
- Excellent troubleshooting, documentation, and analytical skills
- Commitment to safety, quality, and environmental standards
- Ability to lead and train team members on technical and compliance-related topics
- Ability to work independently, manage multiple tasks, and prioritize effectively
Compensation details: 96 Yearly Salary
PI34bc9acf25ca-26289-39818891
You will act as the Staff Mechanical Engineering Owner’s Representative with technical expertise for mechanical engineering issues, design management of in-house and outside resources, code compliance, Disney design standards, documentation, specifications, and life cycle cost analysis for best value. This role also involves close collaboration with other engineering disciplines and multiple Disney project teams including FAM, WDI, Entertainment, and Operations.
You will report to the Senior Manager for MEP Engineering with DLR Architecture & Facilities Engineering.
Act as Owner’s Representative on projects from concept through construction at the Disneyland Resort. Project types will include shops, rides, hotels, shows, maintenance facilities, and nearly any built facility and area development found on our property.
Manage the design and development of contract documents of projects with in-house and outside resources to meet project scopes, schedules and budgets.
Attend, participate, and problem solve during site visits from concept through construction.
Review drawings and specifications and ensure that all projects are designed and executed to applicable codes and statutes
Work with stakeholders to provide civil engineering resources to develop project scope including design, planning and code compliance for estimation and feasibility.
Develop clear technical analyses and recommend frameworks to inform executive review and approval.
Liaison with City officials and external agencies to ensure project scope and implementation is coordinated and compliant with external requirements.
Perform field work to investigate and assess mechanical related infrastructure in the Resort.
Review shop drawing submittals and respond to vendor requests for information per Resort standards.
Coordinate design activities and monitor field installations and demolition work that comply with specifications and code requirements.
Serve as Engineer of Record on assigned projects, including signing and sealing construction documents when required.
Assist Project and Design Managers to resolve design compliance issues relating to Projects requirements. Support Executive Design Reviews by contributing technical content, analysis, and coordination as requested by Project or Design Management.
10+ years of experience in mechanical engineering design, HVAC/DX/VRF/CHW applications, central plant development and operational guidance, hydraulics, hydronics, compressed air, overall kitchen designs and implementation.
~ Ability to support project partners in procurement and construction.
~ Experience with AutoCAD, Revit, ACC, and other engineering-based software.
~ Working knowledge of both National and Local Standards and Codes.
BS Mechanical Engineering or related field from an ABET accredited university.
Current registration as a Professional Engineer in the State of California in good standing.
#Benefits and Perks: Disney offers a rewards package to help you live your best life. The base pay actually offered will take into account internal equity and also may vary depending on the candidate’s geographical region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered.
L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Job Title: Sr. Specialist, Integration & Test Engineering (Space Optical Systems)
Job Code: 33755
Job Location: Wilmington, MA
Job Schedule: 9/80 (Every other Friday off!)
Relocation: Relocation assistance is available to qualified applicants
Job Description:
On the L3Harris team, your job is to secure the world. We don't work here just for the advanced technology and equipment: we work here because we know what - and who - we're protecting! From families to the intelligence community, and from our climate to our men and women in uniform - we're making the world a safer place!
L3Harris Space Superiority group has an opening for a Integration & Test Engineer to join our team of qualified, diverse individuals. This position will be in Wilmington, MA. The individual will work in a fast-paced environment with significantly diverse assignments and a collaborative team setting.
AgileEO specializes in space-based, small aperture visible and IR telescopes with integrated electromechanical devices used for motion and focus control. The successful candidate will support the program technical leads (Lead or Chief Systems Engineer, IPT Lead) by performing technical analysis, managing specifications, and generating design review and technical documents. Additional responsibilities include supporting the test and design verification, requirements sell off, end item data package (EIDP) generation efforts.
Essential Functions:
* System Design and Integration: Develop and integrate advanced electro-optical systems for space-based applications, ensuring compliance with all relevant specifications and mission requirements.
* Technical Leadership: Provide technical leadership and guidance in systems engineering, including test development, requirements verification and validation (V&V).
* Testing and Validation: Design, plan, and execute test procedures for electro-optical components and systems. Analyze test data to validate system performance against requirements. Identify and troubleshoot issues, propose corrective actions, and implement solutions.
* Requirements Management: Define, manage, and maintain system and sub-system level requirements, ensuring traceability and compliance throughout the project lifecycle.
* Project Execution: Lead and coordinate multidisciplinary engineering teams throughout the project lifecycle, from conceptual design to final system delivery and operation.
* Documentation and Reporting: Generate and maintain detailed technical documentation, including test plans, procedures, work instructions, test reports, and anomaly reports.
* Trade Studies: Develop and evaluate trade studies to support decision-making processes, ensuring accuracy and completeness.
* Stakeholder Communication: Communicate effectively with internal and external stakeholders, including subcontractors and U.S. Government customers, to ensure alignment and project success.
* Standards Compliance: Ensure all engineering activities adhere to industry standards, regulatory requirements, and best practices.
* Collaboration: Work closely with cross-functional teams, including engineering, production, and quality assurance, to ensure successful system integration and test.
* Written and Oral Communication: Demonstrate excellent written, oral, and presentation communication skills. Prepare effective presentations to communicate technical information to non-technical professionals.
* Continuous Improvement: Participate in process improvement initiatives to enhance test methodologies and system integration practices.
* Candidate must be eligible to obtain a DoD security clearance.
Qualifications:
* Bachelor's degree in Engineering, Physics, or other related scientific discipline and 6 years of relevant EO/IR systems engineering work experience. Alternatively, a graduate degree with a minimum of 4 years of prior related experience, or in lieu of a degree, a minimum of 10 years of prior related experience.
* 3+ years experience working with systems integration and test
* Prior or current experience working with eletro-optical/imaging systems
* Prior or current experience working with space environment considerations and testing protocols
* 3+ years experience with engineering and simulation software tools, such as MATLAB
Preferred Additional Skills:
* Active Secret or Top Secret/SCI clearance is highly preferred
* Demonstrated experience with space systems engineering, including knowledge of space environments, satellite systems, and space mission design. Familiarity with NASA-STD-1540 and/or NASA-STD-7002.
* Experience in leading technical teams, managing projects, and coordinating cross-functional engineering activities.
* Proficient in Model-Based Systems Engineering (MBSE) tools such as DOORs, CAMEO, CREO, JIRA, and SysML.
* Excellent verbal and written communication skills, with the ability to clearly convey complex technical information to diverse audiences.
* Strong analytical and problem-solving abilities, with a proven track record of tackling complex engineering challenges.
* Ability to work effectively in a team environment and collaborate with multidisciplinary teams to achieve project goals.
* Working knowledge of Microsoft Word, Excel, Visio, PowerPoint, and other relevant
In compliance with pay transparency requirements, the salary range for this role in Massachusetts is $1119,500 - $222,500 . This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.
L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
Industrial Engineering Manager will be responsible for planning, designing, implementing, and managing; integrated, productions and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site. The Industrial Engineering Manager will adopt as its goals profitability, effectiveness, adaptability, responsiveness, quality, and the continuous improvement of products and services throughout their life cycles.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Establish and clearly communicate all global and regional Industrial Engineering strategies to the Industrial Engineering Department
· Coach, mentor and train all engineers with the Industrial Engineering Department
· Recruit and retain Industrial Engineering talent within the site
· Report and drive improvement within the site through the monitoring of the key Industrial Engineering metrics
· Develop and maintain the Industrial Engineering succession plan for the site
· Insure the standardization of Jabil processes throughout the site in accordance with the global and regional direction
· Standardize the configuration of the systems used (e.g. SAP, MES, IEDB…)
· Develop and maintain site key process flow charts
· Develop, analyze and maintain accurate department forecast based on both historical and forecast data
· Support the Lean organization by developing a solid process foundation and data integrity in order to support process improvement through the organization
· Support and/or maintain all lower level Industrial Engineering essential duties and responsibilities
· May perform other duties and responsibilities as assigned
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Key Requirements:
o Understanding and application of broad range of industrial engineering tools (ie. Work measurement, simulation, process mapping, facilities and workstation design, operations research, etc.)
o Understanding of Jabil’s global strategies and direction
o Understanding of site’s facilities, capabilities and how they tie back to the Jabil strategies and direction
o Understanding of the complete Sales to Payment process
o Strong financial and analytical ability
o Proven track record of successful change management accomplishments, implementing and management continuous improvements and cost reduction programs
o Strong communication skills
· Proficiency in use of personal computers, Microsoft Office products (Excel, Word and PowerPoint), Microsoft Visio, Microsoft Project, and e-mail skills required.
EDUCATION & EXPERIENCE REQUIREMENTS
· Degree in Industrial Engineering or Production Engineering
· MS in Industrial Engineering or MBA preferred
· Lean Silver Certificate or Six Sigma Black Belt preferred
· At least 5 years of working experience in the Industrial Engineering or related field, with a minimum of 1 years of supervisory experience
