Engineering Standards Examples Jobs in Usa

Under general and/or immediate supervision from higher level engineering staff, performs a variety of journey level technical drafting, office and field engineering work; and provides assistance and information to the public. May exercise functional and technical supervision over less experienced technical staff.
Position Snapshot/A Day in the Life: The Engineering Technician II performs routine drafting and technical engineering work in support of municipal infrastructure projects. Responsibilities include assisting with engineering design and planning, providing customer service, and performing technical office and field duties related to updating, maintaining, and analyzing the Public Works and Engineering Department's Geographic Information System (GIS) and utility infrastructure data. This position coordinates and conducts research, field data collection, and condition assessments of infrastructure assets, using GIS, database, and information management tools to support capital planning and ensure compliance with regulatory requirements.

Essential Functions

Engineering Technician II -This is the full journey level in the Engineering Technician series. Employees within this class are distinguished from the Engineering Technician I By the performance of the full range of duties as assigned including the moderately complex duties of drafting, office and field engineering work. Employees at this level receive only occasional instruction or assistance as new or unusual situations arise, and are fully aware of the operating procedures and policies of the work unit. This class is flexibly staffed and is normally filled by advancement from the I level, or when filled from the outside, requires previous work experience.

ESSENTIAL FUNCTIONS:Incumbent must have the ability to:

• Review and process tract maps, parcel maps, of line adjustments, grants of easement, and street right-of-ways for recordation.
• Verify fulfillment of conditions of approval for new subdivisions; perform on-site inspections to verify survey monuments related to parcel maps and lot line adjustments.
• Prepare and draft technical engineering plans for construction of streets, alleys, storm drains, water lines, and other public improvements.
• Provide public assistance at counter and over the telephone.
• Prepare quantity and cost estimates for engineering projects.
• Maintain a variety of maps and records including tract maps, parcel maps, lot line adjustments, easements, street and address changes.
• Review engineering plans to determine appropriate layout of construction projects.
• Perform on-site inspections to obtain information; determine angles and set grade stakes, hubs, turning points and benchmarks using appropriate surveying techniques; locate and measure boundary lines, right-of-ways, and land grades.
• Make and check mathematical calculations related to surveying, drafting and basic engineering.
• Maintain accurate survey records in the form of field notes and sketches.
• Participate in a variety of engineering design and planning work related to municipal engineering projects.
• Answer questions and provide information to the public concerning engineering activities.
• Assist in development and maintenance of the record keeping and filing systems.
• Prepare, assemble and distribute copies of maps, charts and blueprints.
• Answer questions and provide information to the public concerning engineering activities.
• Perform any other tasks or functions deemed necessary to the daily operations of the employer.

EXPERIENCE AND TRAINING GUIDELINES: A combination of experience and training that would likely provide the required knowledge and abilities is qualifying. The employee must have knowledge of:

Engineering Technician II: In addition the qualifications of Engineering Technician I, knowledge of:

• Terminology, methods, practices and techniques of drafting.
• Trigonometry as applied to the computation of angles, areas, distances and traverses.
• Elementary surveying techniques and practices.
• Engineering maps and records.

• Perform moderately complex engineering and mathematic calculations with speed and accuracy.
• Understand and follow written instructions and sketches.
• Use and care for drafting, surveying, and mechanical instruments and tools.
• Work independently in the absence of supervision.

The City of Fontana has a flexible benefits plan. This plan allows for employees to select benefits based upon their individual needs. Full-time and Classified Part-time employees are eligible for benefits.

Please to view our excellent employee benefit options.

• 
  
  
• High School graduate or equivalent
  
  
• Some college
  
  
• Trade school graduate or Apprenticeship
  
  
• Associate's degree in related field
  
  
• Bachelor's degree in related field
  
  
• Bachelor's degree or higher in non-related field
  
  
• Equivalent to Bachelor's degree in related field
  
  
• Master's degree or higher in related field
  
  
• None of the above
  
  

• 
  
  
• No experience
  
  
• Less than one (1) year.
  
  
• One (1) year or more year(s) but less than two (2) years.
  
  
• Two (2) or more years but less than four (4) years.
  
  
• Four (4) or more years but less than six (6) years.
  
  
• Six (6) years or more but, less than eight (8) years.
  
  

Required Question

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The Boeing Company is looking for a Systems Engineering Senior Manager – Enterprise Regulatory Administration to join our team in Everett, Washington.

The Safety, Security & Airworthiness organization is seeking to fill a Senior Manager position within the Enterprise Regulatory Administration team. This position is responsible for teams associated with the administration, oversight, and support of the FAA appointed Boeing Organization Designation Authorization (ODA) Unit, including Engineering Unit Members, Inspection Unit Members, and Project Administrators who perform functions on behalf of the FAA. This includes overseeing the appointment, training, and annual assessment of the ODA Unit Members.  This role will provide technical leadership to support the communication and resolution of complex regulatory and compliance issues with the FAA and ODA unit members.

The ideal candidate has experience in leading cross-functional teams, integration across IPTs, certification, safety, and systems engineering. The candidate will have the ability to lead and influence other organizations (programs, functions), the ability to take ambiguous and complex topics and clearly communicate intent, and to plan and drive outcomes. Coordination with regulatory agency counterparts and internal stakeholders will also be central to this role.  

The successful candidate must be qualified, in accordance with FAA Order 8100.15, to be appointed by the FAA as an Administrator for the Boeing ODA unit.

This position manages a direct-reporting team of first-level managers and non-management employees performing engineering and technical activities in the Systems Engineering skill area. A successful applicant will thrive as an essential part of a collaborative environment that extends to external stakeholders, and will be able to successfully balance tactical business needs while working towards strategic goals.

Position Overview:

• Prepare certification documents and artifacts for submission to Regulatory Administration and FAA stakeholders; ensure artifacts are complete, traceable, and aligned to applicable requirements.
• Develops and executes integrated departmental plans, policies and procedures and provides input on departmental business and technical strategies, goals, objectives
• Acquires resources for department activities and leads process improvements
• Develops and maintains relationships and partnerships with regulatory authorities, customers, stakeholders, peers, partners and direct reports
• Provides oversight and approval of technical approaches, products and processes
• Manages, develops and motivates employees and first-level managers
• Establishes and implements team priorities and leads accomplishment of organizational objectives
• Creates a culture of continuous improvement and employee engagement to achieve organizational quality, productivity, and timeliness results

This position is expected to be 100% onsite.  The selected candidate will be required to work onsite at the Everett, WA site.

Basic Qualifications (Required Skills and Experience):

• Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
• 5+ years of engineering experience
• 3+ years of experience as a leader or manager
• Experience and familiarity with certification processes and procedures and ODA and Applicant roles
• Currently or previously held an FAA ODA Unit Member or Administrator or FAA Designee appointment, or is able to readily obtain an FAA appointment

Preferred Qualifications (Desired Skills and Experience):

• Experience with FAA regulations, policies, and procedures applicable to the ODA functions
• 3+ years of experience working directly with the FAA and/or ODA on type Certification projects
• Bachelor’s degree or higher in Engineering, current engineering managers who do not have an engineering degree but have previous experience in a professional exempt engineering SJC classification will still be considered for exception
• Practical experience conducting analyses and studies for safety, system security, regulatory, certification, product assurance and other specialties to ensure mission success
• Excellent oral and written communication skills
• Proven ability to lead with the Boeing values & behaviors
• Proven ability in team building, coaching, and employee development
• Expertise in resolving cross-functional and cross-program technical and organizational issues
• Experience applying systems engineering and project management best practices

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range: $181,900 - $246,100

Applications for this position will be accepted until Mar. 24, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The Boeing Company is looking for a Systems Engineering Senior Manager – Enterprise Regulatory Administration to join our team in Everett, Washington .

The Safety, Security & Airworthiness organization is seeking to fill a Senior Manager position within the Enterprise Regulatory Administration team. This position is responsible for teams associated with the administration, oversight, and support of the FAA appointed Boeing Organization Designation Authorization (ODA) Unit, including Engineering Unit Members, Inspection Unit Members, and Project Administrators who perform functions on behalf of the FAA. This includes overseeing the appointment, training, and annual assessment of the ODA Unit Members. This role will provide technical leadership to support the communication and resolution of complex regulatory and compliance issues with the FAA and ODA unit members.

The ideal candidate has experience in leading cross-functional teams, integration across IPTs, certification, safety, and systems engineering. The candidate will have the ability to lead and influence other organizations (programs, functions), the ability to take ambiguous and complex topics and clearly communicate intent, and to plan and drive outcomes. Coordination with regulatory agency counterparts and internal stakeholders will also be central to this role.

The successful candidate must be qualified, in accordance with FAA Order 8100.15, to be appointed by the FAA as an Administrator for the Boeing ODA unit.

This position manages a direct-reporting team of first-level managers and non-management employees performing engineering and technical activities in the Systems Engineering skill area. A successful applicant will thrive as an essential part of a collaborative environment that extends to external stakeholders, and will be able to successfully balance tactical business needs while working towards strategic goals.

Position Overview:

• Prepare certification documents and artifacts for submission to Regulatory Administration and FAA stakeholders; ensure artifacts are complete, traceable, and aligned to applicable requirements.
• Develops and executes integrated departmental plans, policies and procedures and provides input on departmental business and technical strategies, goals, objectives
• Acquires resources for department activities and leads process improvements
• Develops and maintains relationships and partnerships with regulatory authorities, customers, stakeholders, peers, partners and direct reports
• Provides oversight and approval of technical approaches, products and processes
• Manages, develops and motivates employees and first-level managers
• Establishes and implements team priorities and leads accomplishment of organizational objectives
• Creates a culture of continuous improvement and employee engagement to achieve organizational quality, productivity, and timeliness results

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at the Everett, WA site.

Basic Qualifications (Required Skills and Experience):

• Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
• 5+ years of engineering experience
• 3+ years of experience as a leader or manager
• Experience and familiarity with certification processes and procedures and ODA and Applicant roles
• Currently or previously held an FAA ODA Unit Member or Administrator or FAA Designee appointment, or is able to readily obtain an FAA appointment

Preferred Qualifications (Desired Skills and Experience):

• Experience with FAA regulations, policies, and procedures applicable to the ODA functions
• 3+ years of experience working directly with the FAA and/or ODA on type Certification projects
• Bachelor’s degree or higher in Engineering, current engineering managers who do not have an engineering degree but have previous experience in a professional exempt engineering SJC classification will still be considered for exception
• Practical experience conducting analyses and studies for safety, system security, regulatory, certification, product assurance and other specialties to ensure mission success
• Excellent oral and written communication skills
• Proven ability to lead with the Boeing values & behaviors
• Proven ability in team building, coaching, and employee development
• Expertise in resolving cross-functional and cross-program technical and organizational issues
• Experience applying systems engineering and project management best practices

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range : $181,900 - $246,100

Applications for this position will be accepted until Mar. 24, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

JOB SUMMARY

In this role, you will provide optimum test solutions and strategies through the effective management of people, systems, procedures, and equipment. Drive innovation and continuous improvement within Test Engineering by harnessing new technologies in the areas of systems, equipment, and processes. Provide exceptional support to customers, team members, and shareholders. Must have a HW and electronics testing background!

• Relocation available!

• Competitive Benefits and Salary with Annual Bonus Opportunity!

• Sign-on Bonus DOE!

• Immediate Need!

LEADERSHIP AND MANAGEMENT RESPONSIBILITIES

• Recruit, interview and hire Assistant Test Engineering Managers.

• Communicate criteria to recruiters for Test Engineer and Test Management position candidates.

• Coach Test Engineering Managers in the interviewing/hiring process.

• Monitor team member turnover; identify key factors that can be improved; make improvements.

• Identify individual and team strengths and development needs on an ongoing basis.

• Create and/or validate training curriculum in area of responsibility.

• Coach and mentor Test Engineering staff to deliver excellence to every internal and external customer.

• Create and manage succession plans for Test Engineering and Test Management functions.

• Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).

• Solicit ongoing feedback from Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.

• Express pride in staff and encourage them to feel good about their accomplishments.

• Perform team member evaluations professionally and on time.

• Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.

• Coordinate activities of large teams and keep them focused in times of crises.

• Ensure recognition and rewards are managed fairly and consistently in area of responsibility.

• Provide communication forum for the exchange of ideas and information with the department.

• Organize verbal and written ideas clearly and use an appropriate business style.

• Ask questions; encourage input from team members.

• Assess communication style of individual team members and adapt own communication style accordingly.

FUNCTIONAL MANAGEMENT RESPONSIBILITIES

• Know and understand the campus strategic directions.

• Define, develop and implement Test Engineering strategies which contribute to the campus strategic directions.

• Develop an understanding of the Workcell business strategy as it pertains to Test Engineering.

• Provide regular updates to BUM, WCM, and Operations Manager on the execution of the strategy.

• Identify creative ways to reduce cost by streamlining processes and systems (i.e. modification of responsibilities or consolidation of tasks, elimination of non-value-added processes, or complete re-engineering of processes and systems).

• Utilize tools to monitor departmental cost and cost trends, striving continuously to improve value.

• Provide feedback to peers (BUMs, WCMs, Functional Managers (FMs) on cost and cost trends.

• Prepare timely forecasts for the department.

• Compare forward forecast results to historical actual results for trend assessment and analysis.

TECHNICAL MANAGEMENT RESPONSIBILITIES

• Identify creative ways to reduce cost by streamlining processes and systems (i.e. modification of responsibilities or consolidation of tasks, elimination of non-value-added processes, or complete re-engineering of processes and systems).

• Drive continuous improvement through trend reporting analysis and metrics management.

• Assess the adequacy of data gathering methods utilized by the Workcells.

• Assure that procedures and work instructions are efficient and not redundant.

• Offer new ideas and suggestions for improvement. Identify and implement new practices and processes.

• Demonstrate a commitment to customer service; anticipate, meet, and exceed expectations by solving problems quickly and effectively; making customer issues a priority.

• Lead by example.

• Rehabilitate troubled Workcells or to help during product launch. Foster a “back to basics” mentality during these times.

• Establish new measurement systems if/where possible.

• Exchange knowledge and information with other Jabil facilities to ensure best practices are shared throughout the Jabil organization.

• Ensure 100% adherence to all company policies and procedures (i.e. Health and Safety, Quality).

• Ensure all sensitive and confidential information is handled appropriately.

• Evaluate customer test strategies and recommend appropriate test solutions to support customer requests.

• Drive the development of specialized test equipment and software.

• Manage the procurement of test equipment.

• Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.

• Comply and follow all procedures within the company security policy.

• May perform other duties and responsibilities as assigned.

EDUCATION & EXPERIENCE REQUIREMENTS

• Bachelor’s degree in Electrical Engineering or related discipline preferred

• Minimum of 8 years work-related experience in a HW test or electrical engineering role with a minimum of 5 years management experience required.

• Or a combination of education, experience and/or training.

• Proficiency in use of personal computers, Microsoft Office products (Excel, Word and PowerPoint) and e-mail skills required.

• Electronics manufacturing and HW testing background highly desired

• Ability to understand schematics

• Contribute to development of DOE's and data gathering to resolve ongoing failure trends

• Ability to understand test scripts and make modifications as needed,

• Ability to solve random failures by interrogation of test logs/ software / physical measurement / visual identification, define implement and perform tester PM 

• Project management and budgeting experience

BENEFITS WITH JABIL

Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:

• Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options

• 401K match

• Employee Stock Purchase Plan

• Paid Time Off

• Tuition Reimbursement

• Life, AD&D, and Disability Insurance

• Commuter Benefits

• Employee Assistance Program

• Pet Insurance

• Adoption Assistance

• Annual Merit Increases

• Community Volunteer Opportunities

Apply Today!

Role: Design Release Engineer

Location: Dearborn, MI

Job-Type: Full- Time

Key Responsibilities

• Perform Design & Release engineering activities at component and system level.
• Follow the Design Change Checklist for each part to understand required DV and PV.
• Execute CAD and CAE updates as required.
• Develop DVP&R for the system and components.
• Manage the new supplier interaction and management with support from Ford STA team.
• Create and maintain the detailed development work plans in support of program timing.
• Support and maintain engine BOM.
• Perform WERS release and participation in change control.
• Move multiple parts across various engine platforms to alternative suppliers.
• Focus includes but not limited to powertrain systems such as of base engine, exhaust/after-treatment, turbochargers/air induction, thermal systems and fuel/ignition/evaporative emissions systems in addition to any other ICE powertrain systems.
• Own the engine sub-system design release process using OEM PLM system (e.g. Teamcenter, CATIA, etc.).
• Approve drawings, BOMs, part numbers, and configuration content.
• Manage Engineering Change Requests (ECR's) and Engineering Change Orders (ECO's).
• Ensure design change impacts to cost, quality, emissions, and timing are evaluated and communicated.
• Lead Validation, APQP & Launch Support
• Lead engine sub-system related APQP activities including DFMEA, PFMEA, SCAAFS, Control Plans etc.
• Support DV/PV testing: durability, thermal, NVH, performance, and emissions.
• Coordinate prototype, mule, and pre-production engine builds.
• Support PPAP readiness and launch activities
• Ensure Quality, Compliance & perform Risk Management
• Must be Proficiency with CAD and PLM tools (e.g. CATIA and Teamcenter)

Qualifications

• Bachelor's or Master's degree in Mechanical, Automotive, or related Engineering field.
• 3-6 years of internal combustion engine development experience.
• Prior experience in design release or technical leadership roles.
• Strong knowledge of engine systems, materials, and manufacturing processes.
• Experience with APQP, DFMEA, PPAP, and product launch support.
• Proficiency with CAD and PLM tools (e.g. CATIA and Teamcenter)
• Ford experience required

About Project Technologies and Services (PTS)

Project Technologies and Services (PTS) is a Northeast Ohio-based consulting engineering and project management firm serving industrial and manufacturing facilities. We deliver practical, field-proven engineering solutions that support capital equipment installations, plant upgrades, and automation projects.

We engineer equipment and process systems inside active manufacturing environments. Our work integrates structural, mechanical, electrical, and controls engineering to execute real-world industrial projects.

About the Role

We are seeking an experienced Engineering Project Manager to lead industrial capital equipment installations, plant upgrades, and infrastructure projects within manufacturing environments.

This role combines technical engineering knowledge, project leadership, and field execution oversight. The Project Manager will be responsible for planning, coordinating, and executing projects while working directly with client personnel, contractors, and internal engineering teams.

The ideal candidate is proactive, organized, and comfortable operating in active industrial facilities while managing multiple project priorities. The position requires technical understanding, field presence, and hands-on involvement with project execution.

Responsibilities

• Lead execution of capital equipment installations and plant modification projects
• Develop project scopes, schedules, and budgets
• Coordinate internal engineering resources and external contractors
• Review and develop equipment layouts, drawings, and technical documentation
• Support or perform technical engineering tasks as needed within projects
• Perform field walkdowns, site verification, and installation coordination
• Manage construction activities and ensure safe installation practices
• Coordinate with plant operations, maintenance, and engineering personnel
• Track project progress, costs, and schedule performance
• Identify and mitigate project risks and resolve field issues
• Lead project meetings and communicate status to clients and stakeholders
• Support equipment startup, commissioning, and project closeout activities
• Support proposal development, estimating, and new project opportunities

Qualifications

• Bachelor’s degree in Engineering (Mechanical, Electrical, Industrial, or Civil/Structural preferred)
• 5+ years of experience managing engineering or capital projects in industrial or manufacturing environments
• Strong communication skills and professional client-facing presence
• Experience coordinating contractors and multidisciplinary project teams
• Ability to independently manage multiple projects and priorities
• Strong organizational and problem-solving skills
• Proficiency in Microsoft Excel and Word
• Working knowledge of project scheduling tools (MS Project or similar)
• Familiarity with AutoCAD and/or SolidWorks preferred
• Have or on track to obtain PE or PMP is a bonus
• Ability to work in active industrial environments

Compensation Details

• Full-time with benefits
• Salary range: $90,000 – $125,000, commensurate with experience
• Paid holidays and PTO
• Flexible Work Schedule
• Health, Vision, Dental insurance available
• Retirement plan with employer match

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world.

We're growing fast and we want you to grow with us! We're expanding our engineering organization dramatically to meet exciting customer demand, and we're actively looking for engineers who bring strong foundational skills and a passion for solving hard problems. Industry experience in defense? Not required — we'll invest in you. If you meet the minimum qualifications, we want to talk. Apply today and take the next step in your engineering career.

The Systems Engineering and Test Center (SETC) organization is currently hiring a Senior Systems Engineer to join our Tucson, AZ location. SETC is an exciting and challenging environment where you will have the opportunity to design, develop and partner with multi-disciplines to shape innovative solutions for our customers. Join our organization and experience the Systems V engineering life cycle while interfacing with a variety of engineering disciplines, subject matter experts, Chief Engineers, Chief Technologists, the customer, and so many more to ensure we design, integrate, and strengthen our systems to work the first time and every time for our warfighters!

As a Senior Systems Engineer you will be responsible for technical rigor of requirements documents, coordination across teams, sharing program process knowledge, mentoring engineers, and working with the technical and program leads execute program tasks. Responsibilities include, but are not limited to, requirements management, providing SE oversight during integration and test activities. In this role, you will have the opportunity to work on an effectors project pertinent to the systems lifecycle. This role is 100% on-site at our Tucson, AZ campus with the possibility of occasional travel.

What You Will Do

• Update, maintain, and improve requirements and requirements documentation for development and production efforts
• Perform and execute integration, verification and testing and/or provide Systems Engineering support during the test.
• Support system performance analysis, and Integration and Test
• Model the system and the system development and production processes using Cameo
• Participate in Failure Investigations
• Conduct Trade Studies and present results to customers
• Perform test planning to develop and implement test plans, and procedures.
• Prepare integration and verification documentation in both simulated and real-world environments
• Create and present technical data for design reviews and in preparation for test events.
• Troubleshoot and analyze hardware, software, and system issues through detailed data analysis and debugging.
• Conduct statistical and numerical analysis of test data to ensure optimal system performance and to verify requirements.
• Support mission execution at various locations including local RTX facilities, test sites, vendor facilities, and customer locations

Qualifications You Must Have

• Typically requires a Bachelor's in Science, Technology, Engineering, or Mathematics (STEM preferred) and a minimum of 5 years of relevant experience
• Experience in Systems Engineering and/or Systems Integration and test
• Ability to obtain Interim Secret U.S. government issued security clearance is required prior to start date.

Qualifications We Prefer

• Masters or PhD in Engineering, Math or Physics
• Experience presenting technical and analytical presentations
• Experience evaluating and mitigating technical risks
• Experience using Agile framework development methods / processes
• Experience with Agile, Model-Based Systems Engineering (MBSE), and/or Digital Engineering
• A self-starter who can take on task with limited guidance
• Customer focus and collaboration skills
• Experience with performance analysis
• Experience with DOORS and/or cPDM
• Ability to perform trade studies to optimize system performance
• Understanding of Systems Engineering Product Development Cycle
• Familiarity with system safety, reliability, and configuration management
• Experience working in an integration lab, test facility, or in the field supporting integration and/or verification.
• Experience evaluating systems using simulated environments
• Experience generating technical documentation such as trade studies, test plans, procedures or technical reports.
• Experience in integration with test equipment, telemetry data analysis tools, and missile systems host platforms

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
• Relocation Eligible – Relocation assistance is available

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.

• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

• This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: position is an onsite role – Tucson, AZ: ,-az-location

• We Are RTX

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Engineering Test & Evaluation (BT&E) is seeking a Flight Test Engineering (FTE) Managerto join the Boeing Test & Evaluation organization in Seattle, WA, supporting all Boeing Commercial Airplane Programs (BCA).

The FTE management team leads a dynamic organization in performing developmental and certification flight testing of Boeing commercial aircraft. Testing is conducted primarily out of Boeing Field in Seattle, as well as occasional remote testing at a variety of domestic and international sites. In this position, you will manage flight test engineering teams and projects, partner with program and functional leaders, demonstrate strong organizational and communication skills, and utilize your effective problem-solving abilities to support our test programs.

Position Responsibilities:

• Provide oversight of engineering employees responsible for test planning, definition and authorization of airplane configuration changes, test planning, test conduct and test data analysis in support of airplane development and sustaining flight test programs

• Provide leadership in the areas of test program development and integration, scheduling and execution, trade studies and departmental processes/policies

• Assess and lead resolution of issues impacting test program progress, including root cause corrective action to prevent recurrence

• Utilize operational skills to raise team performance and meet cost, schedule and quality commitments

• Develop and maintain budgets, schedules, earned value metrics and performance measures

• Build relationships and partnerships with customers, peers, suppliers, direct reports and other stakeholders

• Manage, develop and motivate employees

• Occasional travel is required to support remote testing for up to 4-6 weeks at a time

Basic Qualifications (Required Skills/Experience):

• The position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

• Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement

• 7+ years of experience in an engineering related role

• 5+ years of experience working in a lab test, flight test, or similar test environment

• 3+ years of experience leading or managing projects that involved cross-functional or cross-business unit teams

• Willing to travel domestically and internationally as needed

Preferred Qualifications (Desired Skills/Experience):

• Bachelor's, Master's, or PhD in Aerospace, Electrical or Mechanical Engineering preferred

• 3+ years of experience of collaborative leadership and teaming with internal and external stakeholders

• 3+ years of experience leading or managing large or complex teams of managers and/or non-management employees

• Flight test program experience and technical domain knowledge

• Ability to communicate effectively at multiple levels

• Strategic planning experience and ability to assess and improve organizational health to create a culture of high performance

• Experience in project management and the ability to work on several projects simultaneously, including experience collecting, interpreting data, and managing high level projects

• Experience with large, transport category aircraft test programs

• Passion and experience in employee training and development

Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. 

Conflict of Interest:

Successful candidate for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.

Pay & Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage, and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations. 

Summary pay range: $136,850 - $185,150

Applications for this position will be accepted until Apr. 02, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.