Engineering Specifications Examples Jobs in Usa
9,096 positions found — Page 11
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Third Shift
Monday - Friday 11:00 p.m. - 7:00 .
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Third Shift
Monday - Friday 11:00 p.m. - 7:00 .
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Remote working/work at home options are available for this role.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
LocationAtlanta, Georgia
Full/Part TimeFull-Time
Regular/TemporaryRegular
Add to Favorite JobsEmail this Job
About Us
Overview
Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our Strategic Plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers.
About Georgia Tech
Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school.
Georgia Tech's Mission and Values
Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do:
Students are our top priority.
We strive for excellence.
We thrive on diversity.
We celebrate collaboration.
We champion innovation.
We safeguard freedom of inquiry and expression.
We nurture the wellbeing of our community.
We act ethically.
We are responsible stewards.
Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact.
About the Wallace H. Coulter Department of Biomedical Engineering at the Georgia Institute of Technology and Emory University
The Wallace H. Coulter Department of Biomedical Engineering at Georgia Tech and Emory University has a student body of 1,200 undergraduates, 425 graduate students, and 80 primary and 73 program faculty. In 2025 US News Graduate Program Rankings placed the department as the #2 ranked department in BME in the United States and our Undergraduate Program as the #2 department in the United States. Since its beginning, the unique partnership between two of the nation's leading public and private entities has been an innovation engine for research and education. Combining the engineering and medical strengths at Georgia Tech and Emory, we are focused on solving some of the toughest problems facing our state, the nation, and the world.
Location
Atlanta, GA
Job Summary
The Wallace H. Coulter Department of Biomedical Engineering at the Georgia Institute of Technology & Emory University invites applications from exceptional senior candidates working in the area of Neuroengineering, broadly defined. The successful candidate will be named the Georgia Research Alliance (GRA) Eminent Scholar in Neuroengineering, an endowed position specific to the Georgia Tech campus. GRA eminent scholars are expected to engage in or contribute to translational and/or economic development efforts in their field. Applicants should have earned a Ph.D. or equivalent degree. Appointment is expected at the rank of full professor with tenure.
The department seeks a visionary scholar-educator and proven leader in high impact and emerging areas of importance to human health and biomedicine. We are specifically interested in the areas of neuroengineering and neuroscience, particularly developing and using approaches in machine learning and AI, with neurotranslational potential. Along with excellent scholarship, candidates are expected to have demonstrated strong leadership in building and leading extramurally funded research programs, noteworthy dedication to innovative teaching and mentoring of diverse undergraduate and graduate student bodies, as well as national and international recognition. Of particular interest are candidates with an established and active record of accomplishment in leading large multi-institution and multi-disciplinary collaborative research efforts and a vision for developing the next generation of neuroengineering tools to facilitate emerging areas such as interactive neurotechnologies, brain computer interfaces, neuroAI, neural control of sensing and moving, the neural bases of decision making and cognitive function, and the neuroscience of neurological or psychiatric disorders.
Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our Strategic Plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers
Responsibilities
The successful candidate will interact with a vibrant and rapidly growing multi-disciplinary community across Georgia Tech, Emory, and greater Atlanta. Examples include: the Georgia Tech/Emory Neural Engineering Center; the newly-formed GT Institute for Neuroscience, Neurotechnology, and Society (INNS), crosscutting multiple Colleges; the McCamish Parkinson's Disease Innovation Program; researchers and educators spanning various basic science and engineering departments across Emory and Georgia Tech, as well as clinical departments such as the Emory Department of Rehabilitation, Division of Physical Therapy, Neurology, Neurosurgery, and the Emory Brain Health Center.
Required Qualifications
A PhD in engineering or related field is required by the start of the appointment.
Preferred Qualifications
- A PhD in engineering or related field is required by the start of the appointment.
- The ability to teach and mentor a student body
- The ability to promote a welcoming educational/work environment
- The ability to mentor and assist students interested in pursuing graduate education
- The ability to engage students in experiential learning activities and pedagogy that support student success
- The ability to engage in high-impact practices that support deep learning for student success
Required Documents to Attach
Applicants should submit 1) a letter of application, 2) curriculum vitae, 3) a statement of research interests, 4) a description of teaching interests, 5) A statement that in two pages or less outlines how the applicant's professional and academic experiences have prepared them to support and apply Georgia Tech's mission and values , and 6) the names and contact information for at least three references. Application materials should be submitted as .PDF files
Apply Before Date
Applications will be considered beginning January 15, 2026, but the search will continue until the positions are filled.
Contact Information
Requests for information may be directed to .
USG Core Values
The University System of Georgia is comprised of our 26 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at policymanual/section8/C224/#p8.2.18_personnel_conduct.
Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at policymanual/section6/C2653.
Equal Employment Opportunity
The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The Institute is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and Institute policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities.
Equal opportunity and decisions based on merit are fundamental values of the University System of Georgia ("USG") and Georgia Tech. Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of an individual's race, ethnicity, ancestry, color, religion, sex (including pregnancy), national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract.
Other Information
This is not a supervisory position.
This position does not have any financial responsibilities.
This position will not be required to drive.
This role is not considered a position of trust.
This position does not require a purchasing card (P-Card).
This position will not travel
This position does not require security clearance.
Background Check
Successful candidate must be able to pass a background check. Please visit employment/pre-employment-screening
The ideal candidate has strong technical expertise, excellent communication skills, and the ability to interpret complex engineering documents across multiple disciplines.
*Key Responsibilities*
* Review and evaluate engineering plans, calculations, and specifications for compliance with applicable local, state, and federal codes, ordinances, and standards
* Examine plans related to civil, structural, transportation, drainage, grading, utilities, and related engineering disciplines (scope may vary by assignment)
* Identify deficiencies, inconsistencies, and code violations; prepare clear and concise correction comments and reports
* Coordinate with engineers, architects, contractors, and agency staff to resolve plan review comments
* Provide technical guidance and interpretations of engineering codes and standards
* Maintain accurate records of plan reviews, approvals, and revisions
* Meet established turnaround times and service level agreements for plan review
* Stay current with changes in engineering codes, standards, and best practices
* Support permitting and entitlement processes as required by client agencies
*Required Qualifications*
* Bachelor’s degree in Civil Engineering or a related engineering discipline
* Minimum 4 years of experience in engineering plan review, design, or construction
* Strong knowledge of engineering codes, standards, and regulations
* Ability to read and interpret complex engineering plans, calculations, and technical reports
* Excellent written and verbal communication skills
* Strong organizational skills with the ability to manage multiple projects simultaneously
* Proficiency with standard engineering and plan review software (e.g., Bluebeam, AutoCAD, Civil 3D, or similar)
*Preferred Qualifications*
* Professional Engineer (PE) license or Engineer-in-Training (EIT) certification
* Previous experience working with or for public agencies
* Familiarity with electronic plan review systems
* Experience in consulting or third-party plan review services
*Work Environment & Benefits*
* Collaborative consulting environment supporting a variety of public and private sector clients
* Competitive compensation commensurate with experience
* Benefits package includes health insurance, retirement plan, paid time off, and professional development opportunities
*About EP Ferris and Associates*
E.P. Ferris and Associates is a professional consulting firm providing specialized plan review and engineering support services to public agencies. The firm is committed to technical excellence, responsiveness, and delivering high-quality service to its clients.
Job Type: Full-time
Benefits:
* 401(k)
* 401(k) matching
* Dental insurance
* Employee assistance program
* Health insurance
* Life insurance
* Paid time off
* Referral program
* Retirement plan
* Vision insurance
Application Question(s):
* What is your proficiency with standard engineering and plan review software (Bluebeam, AutoCAD, Civil 3D, or similar)?
Experience:
* engineering plan review, design, or construction: 4 years (Required)
License/Certification:
* Professional Engineer (PE) or Engineer-in-Training (EIT) (Preferred)
Work Location: In person
Business Area:
EngineeringSeniority Level:
Mid-Senior levelJob Description:
At Cloudera, we empower people to transform complex data into clear and actionable insights. With as much data under management as the hyperscalers, we're the preferred data partner for the top companies in almost every industry. Powered by the relentless innovation of the open source community, Cloudera advances digital transformation for the world's largest enterprises.
The Data Platform Pillar is the bedrock of Cloudera's technology, where we design and build the core components that let our customers store, manage, and process data with unmatched scalability, security, and performance.
Cloudera is looking for a strong engineering leader with a distributed systems background to lead a team within the Storage Engineering group, focused on building Apache Ozone and Apache HDFS. The Storage team is responsible for primary storage and storage access layers, which are core to the Cloudera Data Platform.
Apache Ozone is an open source, massively scalable, distributed object store with a distributed file system interface. Ozone is designed to scale to tens of billions of files and blocks, and overcome the limitations of Hadoop Distributed File System (HDFS), namely, millions of small files and managing a huge number of data nodes.
Ozone is one of the fastest-growing products inside CDP in terms of customer adoption and expansion revenue. This is an opportunity to lead a team that created and wrote most of the Ozone code and make a huge impact on the big data storage industry.
**This is an onsite role for our HQ in Santa Clara, CA**
As a Sr. Manager, Engineering you will:
Manage and lead a team of talented engineers and senior individual contributors based in North America.
Develop and execute on a technical roadmap and strategy for your team, aligning with the department's vision and the company's business goals.
Lead and mentor a team of software engineers, including senior and principal-level contributors, fostering a culture of technical excellence and innovation.
Partner with Engineering leaders, product managers, and partner teams to understand requirements, develop solid designs and implementations, and facilitate integration and adoption.
Drive and enforce best practices for the software development lifecycle, including coding standards, testing, deployment, system scalability, reliability, and security, tracking key performance indicators for engineering quality and efficiency.
Communicate team progress, successes, challenges, and strategic plans clearly and transparently to engineering leadership and other business stakeholders.
Oversee team resources, staffing, mentoring, and enhancing a best-of-class engineering team.
Work closely with customers in various geographies and partner teams (like PS and support) to ensure successful adoption of Ozone and provide technical guidance for enterprise customers running 100s of petabytes-scale big data analytics and ML/AI pipelines.
Guide the team in contributing to the Apache open-source community.
We are excited if you have (Required Qualifications):
Experience: 8+ years of experience in software engineering, with 2+ years in an engineering management role.
Domain Expertise: Demonstrable experience with the design, implementation, and operation of large-scale distributed systems, particularly in storage, file systems, databases, or cloud infrastructure.
Technical Depth: Strong understanding of fundamental storage concepts (e.g., consistency, replication, erasure coding, caching).
Management Skills: Proven track record of leading and managing high-performing engineering teams, demonstrating excellent communication and organizational skills.
Communication: Excellent written and verbal communication skills. If you can point to publicly available papers, technical articles or blog posts that is a huge plus.
Education: Bachelor's or Master's degree in Computer Science, Computer Engineering, or a related technical field.
You may also have:
Prior experience contributing to or leading large-scale open-source projects.
Familiarity with the Apache Hadoop big data ecosystem (HDFS, YARN, Hive, Impala, Spark) or related distributed data frameworks.
Experience with specific commercial or open-source distributed storage technologies (e.g., Ceph, Gluster, ZFS, S3-compatible systems).
Experience managing remote or hybrid engineers.
Why this role matters:
You will tackle complex distributed systems challenges, crafting the foundational software for the control and data planes that powers CDP and keeps it running at massive scale. Working at the forefront of hybrid and multi-cloud technology, you will empower data scientists, engineers, and analysts with the tools and infrastructure they need for advanced analytics and modeling.
Collaboration is key, you will work alongside brilliant minds across product, data science, and engineering to drive innovation, standardize best practices, and shape the future of enterprise AI and data platforms. This is your chance to build the future of data and see your work make a global impact.
This role is not eligible for immigrationsponsorship.
The expected base salary range for this role in
California is $203,000 - $254,000
The salary will vary depending on your job-related skills, experience and location
What you can expect from us:
Generous PTO Policy
Support work life balance with Unplugged Days
Flexible WFH Policy
Mental & Physical Wellness programs
Phone and Internet Reimbursement program
Access to Continued Career Development
Comprehensive Benefits and Competitive Packages
Paid Volunteer Time
Employee Resource Groups
EEO/VEVRAA
#LI-SZ1
#LI-REMOTE
Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.
We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Defense, Space & Security (BDS) is seeking a Front-Line Production & Test Engineering Manager to lead production, assembly, and verification of custom-designed and fabricated printed circuit boards (PCBs) and Line Replaceable Units (LRUs) for the Electronic Products and Design (EPD) team in Kent, WA .This role combines hands-on technical expertise with people-first leadership in which you will help build and mentor cohesive, cross-functional teams that deliver safe, reliable flight hardware.
The successful candidate is collaborative, values open communication, and actively develops teammates by sharing knowledge, coaching on best practices, and promoting a culture of continuous learning and respect.
You will partner with engineering, manufacturing, quality, and supply chain leads to remove obstacles, align priorities, and drive predictable outcomes while fostering an inclusive environment where team members feel empowered to raise issues, propose improvements, and contribute to long-term product and process excellence.Position Responsibilities:Manages employees performing engineering and technical activities in the areas of Electronic and Electrical Engineering.Develops and executes project and process plans, implements policies and procedures, and sets operational goals.Acquires resources for projects and processes, provides technical management of suppliers, and leads process improvements.Develops and maintains relationships and partnerships with customers, stakeholders, peers, partners, and direct reports.Provides oversight and approval of technical approaches, products, and processes.Manages, develops, and motivates employees.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at the listed location.Basic Qualifications (Required Skills/Experience):Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement.5+ years of experience in engineering.Preferred Qualifications (Desired Skills/Experience):Bachelor's degree in Aerospace, Mechanical, Electrical Engineering, or related technical field; advanced degree preferred.Experience with PCB design for flight hardware: understanding of multi-layer board stack-ups, controlled impedance, high-speed signal integrity, differential pair routing, and power distribution network design.Knowledge of PCB fabrication and assembly processes: board fabrication technologies, via types (through-hole, blind/buried, microvias), copper plating, soldermask/legend, and surface finish options.Experience specifying and qualifying PCB suppliers and contract manufacturers: supplier audits, capability assessment, lead-time negotiation, and transfer of design data to manufacturers with clear assembly/inspection requirements.Understanding of assembly considerations: pick-and-place constraints, component footprint validation, stencil design, solder paste processes, reflow profiles, and wave/hand soldering where applicable.Proficiency in manufacturing documentation and process control for PCB production: creation/review of assembly drawings, process work instructions, soldering procedures, rework guidelines, and in-process inspection criteria.Effective communication and stakeholder management skills: able to coordinate across design engineering, manufacturing, test, supply chain, and quality teams.Demonstrated familiarity with quality and manufacturing systems such as AS9100, ISO standards, and corrective action processes.Practical understanding of test methods and instrumentation (functional test, environmental, vibration, thermal vacuum, EMI/EMC) and data acquisition/analysis tools.Experience with production processes: assembly work instructions, tooling, fixtures, tolerance stack-up, process capability and manufacturing principles.Proven ability to read and interpret engineering drawings, specifications, and BOMs; familiarity with configuration management and technical documentation control.Proficiency with manufacturing/test software tools and basic data literacy for KPI tracking.Ability to plan, budget, and schedule production/test activities, including resource allocation and risk mitigation for on-time delivery.Conflict of Interest:Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Pay & Benefits:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.Summary pay range: $151,300
- $204,700Applications for this position will be accepted until Mar.
31, 2026Export Control Requirements:This position must meet U.
S.
export control compliance requirements.
To meet U.
S.
export control compliance requirements, a "U.
S.
Person" as defined by 22 C.
F.
R.
§120.62 is required.
"U.
S.
Person" includes U.
S.
Citizen, U.
S.
National, lawful permanent resident, refugee, or asylee.Export Control Details:US based job, US Person requiredEducationBachelor's Degree or Equivalent RequiredRelocationRelocation assistance is not a negotiable benefit for this position.Security ClearanceThis position requires the ability to obtain a U.
S.
Security Clearance for which the U.
S.
Government requires U.
S.
Citizenship.
An interim and/or final U.
S.
Top Secret Clearance Post-Start is required.Visa SponsorshipEmployer will not sponsor applicants for employment visa status.ShiftThis position is for 1st shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.
We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.The 777-8 F Airplane Level Integration Team (ALIT) organization has an exciting opportunity for a Systems Engineering and Integration Manager (Level K) to join our team in Everett, Washington .Position Overview: In this role, you will lead activities critical to the success of the 777-8 F derivative within the 777 X family, such as functional integration, requirements integration, and/or development assurance oversight.
This role will lead teams that own critical program-level deliverables and processes within systems engineering, provide systems engineering expertise and guidance to program Integrated Product Teams (IPTs), and develop artifacts necessary for aircraft certification.
You will have the opportunity to interface with program internal and external organizations such as Engineering Integrated Product Teams, Systems Engineering core, and global partners.The ideal candidate is adaptable, demonstrates curiosity and a learning mindset, has previous experience in Systems Engineering, and has proven ability to lead cross functional teams through complex technical issues.Position Responsibilities: Lead the management and execution of systems engineering activities across the 777-8 F program Lead the development of systems engineering artifacts such as airplane and system-level functional decomposition, functional analysis reports, requirements validation & verification, and program plans and guidance materials Drive accountability for completion of systems engineering activities Integrate amongst program teams to resolve technical risks and issues Manage, develop, and motivate employees Develop and maintain relationships with stakeholders, peers, partners, and team members Develop and execute project and process plans, implement policies and procedures and set operational goals Provide oversight, guidance, and approval of technical approaches, products, and processesWork Authorization:This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at Everett, WA.Basic Qualifications (Required Skills/Experience): Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement 7+ years of engineering experience in the aerospace or similar industry5+ years of experience leading teams in a formal and/or informal leadership role5+ years in Systems Engineering or Design Engineering (e.g.
Systems, Flight Sciences, Interiors, Propulsion, Safety)Fundamental understanding of systems engineering principles (e.g.
requirements, development assurance, and/or functional integration)Ability to effectively navigate and lead a team through dynamic and ambiguous environmentsPreferred Qualifications (Desired Skills/Experience):1+ years of engineering management experience5+ years of experience leading cross-functional teams to resolve complex technical issuesAbility to communicate complex concepts clearly across different audiences and varying levels of the organizationExperience with leading technical cross functional teams, working across organizational boundaries, and ensuring an inclusive environment
Familiarity with the 777 X family of aircraftConflict of Interest:Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union:This is not a union-represented position.Pay and Benefits:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.Summary Pay Range:$151,000
- 205,000Applications for this position will be accepted until Mar.
30, 2026Export Control Requirements:This position must meet U.
S.
export control compliance requirements.
To meet U.
S.
export control compliance requirements, a "U.
S.
Person" as defined by 22 C.
F.
R.
§120.62 is required.
"U.
S.
Person" includes U.
S.
Citizen, U.
S.
National, lawful permanent resident, refugee, or asylee.Export Control Details:US based job, US Person requiredEducationBachelor's Degree or Equivalent RequiredRelocationThis position offers relocation based on candidate eligibility.Visa SponsorshipEmployer will not sponsor applicants for employment visa status.ShiftThis position is for 1st shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
