Engineering Jobs in Wisconsin Flexible

• 
  
• Assemble parts to complete units and component parts in a specialized area
  
  • The ability to perform all the following processes: Fixture Weld Inner Assemblies, Insulation Wrapping, Auto-Welder Operations, End of Cell Checking Fixtures, Air testing
  
  
• May use templates, fixtures, surface plate, calipers, snap gauges, or other inspection tools to measure welded components, bead size, or other necessary dimensions per blueprint. Watches for presence of burn through, cold starts, lack of penetration, bead size, or other indications of suspect welds.
  
• Set up and operate assigned machines to produce finished product in a final assembly
  
• Perform a variety of specialized assembly operations such as jigging, air testing, v-bands and component parts.
  
• Follow all ITAR processes when appropriate
  
• Utilize hand tools, power tools and other special equipment within department
  
• Cleanings and inspecting of all parts
  
• Complete proper paperwork per station
  
• Participate in the corrective action process to prevent defects from recurring.
  
• Follow procedures consistently to obtain repeatability.
  
• Participate in team meetings seeking continuous improvements for the operation.
  
• Observe all safety and OSHA procedures and standards. Maximum lifting of 25lb without assistance. PPE is required at times.
  
• Keep work area safe and clean (5S: Sort, Straighten, Shine, Standardize, Sustain)
  
• Assume responsibility for quality workmanship that meets and/or exceeds customer expectations.
  
• Perform other duties as directed by the supervisor/lead
  
• Other jobs as assigned
  

• 
  
• Must remain current on all welding methods required by NGP or our Customers.
  
• Must have demonstrated mechanical aptitude, proficiency in shop math (fractions, decimals, metric), ability to read and follow specific routing instructions, ability to read and understand setup instructions, ability to read blueprints, proficiency in the use of appropriate measuring instruments (tape measure, dial calipers), ability to check quality of parts against templates.
  
• Must pass the NGP Weld Test.
  
• Must have demonstrated ability to handle production requirements and demonstrated problem solving ability from previous work.
  

• 
  
• Must have the ability to stand for 10-hour shift.
  
• Able to bend, twist, stoop to remove parts from baskets and lift to work area.
  
• Able to load parts into work area and complete baskets without damaging the part.
  
• Good hand and eye coordination.
  
• Ability to lift 25 lbs.
  

• 
  
• $3000 Sign-On Bonus!
  
• Medical, Dental, and Vision Coverage
  
• Wellness Programs
  
• 401K Retirement Plan
  
• Short-Term Disability (STD)
  
• Generous Paid Time Off
  
• Company-Paid Life Insurance
  
• And More!
  

Job Title: Electrical Installer

Location: Milwaukee WI 53222

Duration: 4 Months contract

Pay Rate – $36 - $46/hr

Is driving required for the assignment? Yes

Is personal vehicle mileage reimbursable? Yes

Travel Time 50.000 %

Assignment Start Time: 7am

Assignment End Time 4pm

Job Description:

• Perform installation and checkout on a variety of systems utilizing codes, company procedures, engineering drawings and personal analysis.
• Works with \"Prime\" electrical contractors as required.
• Develops a positive interface with the customer to ensure confidence and satisfaction with the system installation.
• Provides work direction to other employees involved in electrical installation activities.

How You Will Do It:

• Installs raceways, cables and wiring to meet local or national codes, standards and customer system requirements. Lays out electrical controls installation to provide lowest total installed cost.

• Mounts and terminates controls equipment as needed.

• Mentor and assists others as the local expert regarding electrical installation practices, requirements and cost estimates.

• May assist sales with electrical estimates, including walking retrofit projects.

• Determines and validates final termination points to equipment interfaced with the installed system (i.e. chillers, boilers, roof top units, etc.).

• Checks out wiring and terminations of field-installed equipment with test instruments as needed (i.e. volt meters, hand held testers, etc.).

• Keeps management informed of job needs, progress and issues.

• Provides work direction to other employees involved in electrical installation.

• Completes paperwork, including but not limited to time sheets, expense reports, and on-site documentation. Provides feedback to JCI Engineering on changes and keeps as-built drawings current.

• Resolves job site conflicts regarding installation issues or escalates concerns to management as required.

• Communicates with the customer as necessary upon arrival and before leaving the work site.

• Adheres to Johnson Controls safety programs and policies.

• Performs other related duties as assigned.

Required:

• Bachelor's degree and 4 years suggested minimum experience, or a 2-year degree and 8 years suggested minimum experience, or equivalent combination of education and experience.

• Electrical apprenticeship or formal training in electrical installation techniques.

• Possess and maintain journeyman's level electrical license.

• Demonstrated ability to read and interpret drawings.

• Possesses working knowledge of local codes as it applies to controls.

• Experienced in scope determination of installation materials. Able to work independently.

• Leadership skills to support and direct the activities of electricians working on multiple projects simultaneously.

Preferred

• Eight years' experience directly with controls installations.

• Generally required knowledge includes HVAC controls systems, site preparation, peripheral equipment installation and servicing techniques.

Ayesha Misbah

Ateeca Inc.

101 Morgan Lane, Suite 304C,

Plainsboro, NJ 08536

Phone: (9

Email:

We are seeking a hands-on, detail-oriented Quality Supervisor to lead quality assurance and inspection efforts within a fast-paced manufacturing environment. This is a high-impact leadership role for someone who thrives on driving quality standards, developing strong teams, and improving processes that directly impact product performance and customer satisfaction.

If you’re passionate about building a culture of accountability, continuous improvement, and operational excellence, this is an outstanding opportunity to make a visible impact.

This is more than a traditional quality leadership role — it’s a chance to step into a highly visible position within a growing manufacturing organization that is backed by a major industry player and investing heavily in its future. With strong momentum, expanding capabilities, and a clear path for growth, this role offers the opportunity to make a measurable impact while helping shape the next chapter of the business.

What You’ll Do

As the Quality Supervisor, you will oversee day-to-day quality operations across the manufacturing process and ensure products meet rigorous internal and external standards. You’ll partner cross-functionally with production, engineering, and operations teams to resolve issues, improve systems, and elevate overall quality performance.

Key Responsibilities

• Lead and coordinate quality assurance and inspection activities across manufacturing operations
• Supervise a team of quality inspectors, technicians, and team leads across multiple shifts
• Ensure compliance with ISO 9001, ISO 14001, and other applicable quality standards
• Develop, implement, and maintain quality control procedures, systems, and documentation
• Conduct internal audits and help prepare for external audits and inspections
• Drive root cause analysis on non-conformances and lead corrective/preventive actions (CAPA)
• Partner with cross-functional teams to quickly resolve quality issues and improve outcomes
• Maintain inspection records and quality documentation with a high level of accuracy
• Train team members on quality systems, inspection methods, and regulatory requirements
• Identify and implement process improvements that enhance product quality and operational efficiency
• Support and enforce plant safety standards and best practices

What We’re Looking For

We’re looking for a leader who can balance technical quality expertise with strong people leadership. The ideal candidate brings a solid foundation in manufacturing quality systems, understands how to work across teams, and knows how to create structure and accountability on the floor.

Preferred Qualifications

• 3+ years of supervisory experience in a manufacturing environment
• 5+ years of experience working with ISO 9001 quality systems
• Experience leading quality assurance, inspection, or quality systems in a production setting
• Strong experience with root cause analysis, non-conformance resolution, and CAPA processes
• Ability to read and interpret blueprints, technical drawings, machining drawings, and CAD models
• Experience with ERP systems and strong working knowledge of Excel
• Hands-on experience using precision inspection equipment such as:
• CMM
• 3D scanners
• Calipers
• Gauges and other metrology tools
• Strong communication skills with the ability to lead teams and collaborate cross-functionally
• High school diploma required; bachelor’s degree in Engineering, Quality, Business, or a related field preferred
• Relevant quality certifications are a plus

Preco is now hiring a Full-Time Production Supervisor (2nd Shift) for their Metals Department in Somerset, WI.

The Production Supervisor would have all production personnel on that shift as direct reports. The team will be focused on the Metals Market. The Supervisor is responsible for training and motivating employees. The team must meet quality, production, and efficiency goals. The Production Supervisor is to be a point of contact for anyone on shift for questions or directions. The Supervisor is responsible for communication with other groups and shifts.

Preco is a leading designer and manufacturer of precision automated processing systems for high-speed and high-accuracy cutting, perforating, welding, and other specialized industrial processing applications. With our proprietary die cutting and laser-based manufacturing capabilities, Preco has also become one of the largest contract manufacturing service (CMS) providers in North America.

Key Responsibilities:

• Ensure all personnel are aware of and follow Preco safety protocols.
• Follow and meet the manufacturing schedule as defined by Scheduler. Adjust personnel to maintain schedule priorities.
• Strive to manufacture all products to meet specifications. Troubleshoot and resolve quality issues. Stop production if solution cannot be found.
• Support data accuracy and input for production analytics. Use data to analyze productivity to manage production and personnel. Make recommendations to management as appropriate.
• Identify process and procedure problems that negatively affect quality and efficiency. Work with team, other shifts, Engineering, and Quality to resolve problems and continuously improve process.
• Communicate issues and solutions across all shifts. This ensures solutions are leveraged and problems are not repeated.
• Ensure team has resources, tools, and materials to keep machines running efficiently and without quality defects.
• Identify training needs for personnel on shift and schedule training.
• Develop/implement growth and development plans for personnel. This includes daily feedback and annual reviews.
• Verify that orders are complete, documentation is complete and accurate, parts are packed and labeled, properly report time and quantity correctly, and ready to be shipped (all paperwork is filled out completely and correctly).
• Assure production team is performing line clean out and work cell clean up prior to next job or shift.
• Responsible for meeting all SQF (Safe Quality Foods), quality, and customer requirements for this position.
• Responsible for facility lock up and shutdown of unused laser systems.
• Other tasks assigned by supervisor.

Job Requirements:

• High school diploma or GED.
• Minimum 5 years’ experience in a supervisory role utilizing automated production equipment.
• Excellent communication and interpersonal skills.
• Ability to prioritize tasks.
• Strong organizational and time management skills.

Preferred Qualifications:

• Associate Degree or coursework in Management, Business, or Leadership.
• Working knowledge of quality management system (QMS), International Organization for Standardization (ISO), and SQF.
• Exposure to or completion of formal business courses beyond the high school level.

Our dedicated staff keeps us at the leading edge of precision automated processing systems in our industry. When you work at Preco, you have the opportunity to apply your skills to create optimal solutions for our customers. We have a collaborative culture and a team united by a passion to provide solutions to our customers.

Preco has partnered with Hueman for its recruitment needs.

If you are interested in learning more about a career with Preco as a Production Supervisor, apply today!

Company Description

• Founded in 1975, New Berlin Plastics (NBP) is a family-owned leader in custom injection molding, specializing in high-precision, engineering-grade components. Based in a state-of-the-art, 100,000-square-foot facility in New Berlin, WI, we pride ourselves on being more than just a manufacturer; we are a strategic partner to some of North America’s leading OEMs. At NBP, you aren't just a cog in a machine; you are part of a team that values continuous improvement, technical expertise, and a "solution-first" mindset.

Job Description

• Supervise and coordinate daily activities of the production employees to ensure a quality product is produced to meet on-time delivery goals in a cost-effective and safe manner

Duties and Responsibilities

• Assign and prioritize work to produce products according to the production schedule.
• Ensure company policies, safety procedures, and quality standards are followed by all team members
• Actively coach, train, develop, and counsel employees for personal and professional growth opportunities to continually enhance their skill sets.
• Identifies training gaps and ensures production employees receive all required training in a timely manner and cross-training is completed as needed.
• Works with Manufacturing Manager to identify and implement improvement projects to increase safety, production efficiency, and reduce downtown.
• Perform daily shift audits and monitor scrap, molding and finishing performance to ensure quality and quantity standards are met.
• Maintain a safe and clean work environment by periodic inspections of production equipment, workstations, and plant. Request/direct corrective action as needed.
• Review shift-end reports for transaction errors, inefficiencies, and scrap issues and work to resolve issues through communication, training, or corrective action.
• Provide technical assistance with production/process problems
• Work with Human Resources in staffing activities such as interviewing, hiring, career pathing, and training and development of production employees.
• Maintain good employee relations and continuously monitor employee performance.
• Maintain personnel/attendance records of assigned employees.
• Investigate and document work-related injuries.
• Supervisory Responsibilities: Production Employees, Quality Assurance Auditors
• Other duties as assigned.

Qualifications

• Bachelor’s degree and 5 years of supervisor experience in manufacturing and/or a combination of relevant work experience and education in related field.
• Injection Molding experience preferred
• Demonstrated leadership skills to develop, mentor, motivate, and hold others accountable
• Ability to mitigate teams conflicts and elicit cooperation from a wide variety of sources / cross functional teams.
• Strong problem-solving abilities and continuous improvement mindset.
• Proficient with Enterprise Resource Planning (ERP) software. IQMS a plus.
• Ability to be flexible and responsive to changing scheduling requirements.
• Basic proficiency with Microsoft Office (Word, Excel, Outlook)
• License or Certificate Suggested: Forklift

Physical & Work Environmental Requirements

• The physical demands here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with physical disabilities to perform the essential functions.
• Employee is frequently required to stand; use of hands to fingers, talk, and hear. The employee is occasionally required to walk; sit; and stoop, or kneel. Specific vision requires include close vision and color vision.
• Manufacturing and office environment. Safety glasses required in the plant.

All your information will be kept confidential according to EEO guidelines.

The company is a recognized leader in the commercial faade industry, specializing in innovative glazing and curtain wall systems across North America. Known for executing complex, high-value projects with precision and professionalism, they are expanding their national project management team to keep pace with growing demand. Their approach blends craftsmanship with cutting-edge technologyand they're seeking forward-thinking professionals who can lead from anywhere.

The company is seeking a Remote Project Manager with deep experience in commercial glazing or curtain wall systems. This role is ideal for someone who thrives on ownership, excels at remote coordination, and can lead multimillion-dollar faade projects from preconstruction through closeout.

You'll manage every phase of the project lifecycleleveraging digital tools, strong communication, and a process-driven mindset to deliver on time, on budget, and on spec. While you won't be on site every day, your presence will be felt through structured collaboration, proactive planning, and a firm grasp of what it takes to keep complex installations moving forward.

Minimum three years of experience managing glazing or curtain wall projects.

Demonstrated success managing commercial construction projects remotely.

Expertise in architectural, structural, and fabrication drawings.

Strong knowledge of curtain wall, storefront, ACM, or unitized faade systems.

Comfortable leading project updates, vendor negotiations, and client coordination remotely.

Proven ability to manage contracts, track costs, and mitigate risk.

Degree in Construction Management, Engineering, or a related field (or equivalent experience).

Familiarity with Bluebeam, Procore, AutoCAD, or PM platforms.

Existing network of glazing vendors and subcontractors.

Fully remote work with flexible hours.

Collaborative, experienced, and high-performing team.

Opportunities for professional growth and leadership.

Impactful, high-visibility projects across the U.S.

Competitive compensation and benefits package.

Culture that values clarity, accountability, and trust.

The Clinical Affairs Manager will provide clinical expertise, insight, and support to clinical end-users, clinical sales specialists, sales team, Regulatory, Engineering, marketing, and other corporate departments on safe and effective use of the Teleflex Medical product portfolio with primary emphasis on the Coronary/Structural Heart franchise. This position will support the appropriate clinical application of the Coronary/Structural Heart franchise via didactic, web-based, and teleconference education, and understanding of these products and best practices. Clinical support will be provided to physicians, nurses, techs, etc., to include support for live cases/proctorships in the therapeutic areas related to focus products. The Clinical Affairs Manager will drive innovation by identifying product attributes necessary to expand into new markets, or capitalize on new clinical applications; identify new, clinically driven product and market opportunities; and perform other related duties as required. Provide support during society engagements, facilitating the exchange of scientific information in close collaboration with CMA leadership and the broader clinical affairs interventional team.

Customer Experience Representing Teleflex in a customer-facing position is a tremendous responsibility and opportunity. All CMA colleagues are expected to perform with the highest levels of professionalism, service, and ethics to strengthen the Teleflex brand and relationship with our customers. Continuous Improvement - Demonstrates initiative and critical thinking to identify, prioritize process and performance gaps. Develops solutions to deliver improved results. Exemplifies continuous improvement thought processes and focus. Culture and Values Exemplifies Teleflex values and ensures a fair, open, and productive climate that is engaging, ethical, and legally compliant. Strives to work effectively across boundaries in a complex matrix environment. Identify and support BU field efforts for the Coronary/Structural Heart franchise through clinical and educational customer needs assessment, product and procedural training, live case coverage, and assist with customer follow-up for ongoing clinical support as needed. Maintain and develop expertise on the Coronary/Structural Heart Interventional product portfolio related to the specific clinical specialty area and expertise. Identify and expand the customer base through professional networking, consultation related to best practices and the appropriate clinical use of Teleflex products, and timely professional follow-up. Support Coronary/Structural Heart educational programs with aligned educational goals and needs of the Interventional Business Unit. Support scientific exchanges of information with medical societies. Pre-conference & in-booth educational programs, meetings with scientific committees, education grant support, and research submissions (in collaboration with the Global Research & Scientific Services team). Off-label support for Teleflex products in accordance with Teleflex policy & local legal regulations

Manage utilization of HCPs in accordance with Teleflex IPPs. Coordinate efforts between cross-functional partners, including Medical Affairs, Global Research & Scientific Services, marketing, and R&D. Coordinate, participate, and manage educational, scientific activities at identified local, regional, and national trade shows/exhibitions. Serve as part of the CMA clinical expert team on product applications and troubleshooting when interfacing with SBU Leadership, Clinical Sales Specialists, and Teleflex team members. Participate as a clinical expert on project teams, committees, and in meetings with various corporate departments to provide guidance as to the clinical perspectives for the Coronary/Structural franchise. Build and support infrastructure for speaker programs supporting Teleflex Academy, webinars, training content, and programs. Coordinate and participate in content development and review of education material as needed by IA BU or CMA. Manage all business-associated administrative tasks and responsibilities to support job-related activities, to include strict adherence to the Teleflex Medical T&E policies and procedures, timely filing of required and/or requested reports, and documentation of activities via approved documents and forms. Adhere to applicable Teleflex IPPs, Teleflex Code of Ethics, and all Company policies, rules, procedures, and housekeeping standards.

Bachelor's degree is required, preferably in clinical, biology, health sciences, or engineering. Procedural experience within Interventional Cardiology and/or Structural Heart Possess a minimum of five years' clinical exposure in the medical field in the Cardiology environment. Medical Device industry supporting Clinical and Medical Affairs, strongly preferred. Proficient in Microsoft Word, Excel, and PowerPoint required; SalesForce experience preferred.

Open date: November 21, 2025

Next review date: Monday, Mar 16, 2026 at 11:59pm (Pacific Time)

Apply by this date to ensure full consideration by the committee.

Final date: Friday, Nov 20, 2026 at 11:59pm (Pacific Time)

Applications will continue to be accepted until this date, but those received after the review date will only be considered if the position has not yet been filled.

UC Berkeley Extension (UNEX), the continuing education branch of the University of California, Berkeley, has been building bridges between UC Berkeley and the public since 1891. UNEX serves the professional and continuing education goals of thousands of people each year and plays an essential part of the University mission to: extend the research and scholarship of UC Berkeley to a global community; increase access to higher education for non-traditional, online, and international students; and improve the workforce. UC Berkeley Extension is a part of the division under the leadership of the Dean of Extended Education that also includes Berkeley Summer Sessions, Berkeley Study Abroad, and Osher Lifelong Learning Institute.

UC Berkeley Extension invites applications for a pool of qualified, dynamic instructors with a commitment to professional and continuing education in Data Analytics, Data Science, Software Development, and Cybersecurity to teach one or more online courses each year for our Engineering, Technology, and Environmental Management department.

Courses are offered online:

• 
  
• Online instruction is delivered asynchronously through our learning management system (Canvas) or through synchronous live lectures (Zoom).
  
• Most synchronous live online lecture courses are offered in the evening and on the weekend (U.S.A. Pacific Time).
  

We are seeking qualified applicants who possess current subject matter expertise and/or teaching knowledge in (but not limited to) the following course subjects. For program and course descriptions, please refer to the departmental link below.

Data Analytics and Data Science

• 
  
• Introduction to SQL
  
• Introduction to Databases
  
• Data Warehousing and Business Intelligence
  
• Data Visualization
  
• Introduction to Data Analytics
  
• Python for Data Analysis
  
• R for Data Analysis
  
• Data Analytics Capstone
  
• Introduction to Big Data
  
• Introduction to Data Science
  
• Introduction to Machine Learning Using Python
  
• Machine Learning and Deep Learning
  
• Artificial Intelligence Foundations
  
• Data Science Capstone
  

Software Development and Advanced Software Development

• 
  
• Introduction to C Language Programming
  
• C++ Programming
  
• First Course in Java
  
• Programming Python
  
• Data Structures and Algorithms
  
• Front-End Web Development
  
• JavaScript Frameworks
  
• Modern Web Applications and Cloud Computing
  
• Software Design Patterns
  
• Software Quality Assurance
  
• Software Development Capstone
  
• Java: Discovering Its Power
  
• Mastering Python
  
• Back-End Development with Java/Python
  
• Web Software Security Frameworks
  
• Advanced Databases
  
• Advanced Software Development Capstone
  

Cybersecurity

• 
  
• Advanced Network Cybersecurity and AI Monitoring
  
• Cybersecurity AI Risk Management and Governance
  
• Automated Cybersecurity Incident Response and Digital Forensics
  
• Advanced Topics in AI Cybersecurity and Capstone
  

Other Data, Programming, Software Development, or Cybersecurity Courses or Subjects

(please specify in your cover letter)

The department seeks candidates who can support the success of all students through inclusive curriculum, classroom environment, and pedagogy. Specific duties and expectations will vary depending on the method of instruction including: Synchronous Live Online (Zoom); or Asynchronous Online (Start Anytime).

• 
  
• For synchronous instruction (live online courses), duties include but are not limited to: syllabus development; assignment development; lesson planning for class meetings; preparing and submitting required texts and course materials; reviewing and updating Canvas course site; and delivering lectures, presentations, and learning activities for all required hours of instruction.
  
• For asynchronous instruction (start anytime online courses), duties include but are not limited to: reviewing the syllabus and pre-populated online course content; learning and utilizing Canvas classroom management tools; and requesting any training needs from the Program Director or Department Director.
  
• For all instruction (regardless of course format) duties include but are not limited to: completing required trainings as mandated by the UC Presidential policies; responding to student questions and learning needs in a timely manner; grading student assignments and posting final student grades to the instructor portal in a timely manner; utilizing University-approved course support platforms including the Canvas Learning Management System, Zoom, Instructor Portal, Google Workspace, etc.; reviewing and following University and departmental policies, logistics, and other guidelines as published on the departmental Instructional Resource Site; and responding to other requests from the Program Director or Department Director in a timely manner.
  

• 
  
• All work must be performed in the United States, whether in person or online. Applicants must be authorized to work in the United States at the time of hire. Visa sponsorship is not available for this position.
  

Data Analytics, Data Science, Software Development, and Cybersecurity Programs: academic-areas/technology-and-information-management/#!?tab=programs&availability=all

Data Analytics, Data Science, Software Development, and Cybersecurity Programs: academic-areas/technology-and-information-management/#!?tab=courses

• 
  
• Bachelor's degree or equivalent international degree required.
  

• 
  
• 5 or more years of professional industry work experience since degree.
  

• 
  
• 6 or more years of professional industry work experience in the course subject.
  
• Advanced degree in course subject preferred.
  
• Teaching, training or coaching experience in the course subject, within a U.S. corporate environment, or at a U.S. college/university institution.
  
• Experience in creating syllabi, learning objectives, lectures/presentations, learning activities, assignments, assessments, exams, and quizzes.
  
• Experience teaching online and/or developing academic content for online courses.
  
• Ability to convey conceptual and complex ideas and information.
  
• Ability to support the success of all students through inclusive curriculum, classroom environment, and pedagogy.
  
• Effective verbal/written communication and presentation skills (English).
  
• Effective organizational skills with attention to detail.
  
• Ability to collaborate with colleagues and work within a team environment.
  
• Proficiency in (or willingness to learn) instructional and other technology, such as: Learning Management Systems (Canvas); lecture/presentation capture applications (Panopto); online video conferencing (Zoom); Microsoft Office (Word and PowerPoint); file sharing (Google drive or Dropbox); and Google Workspace tools (email, calendar, docs, sheets, slides, etc).
  

• Curriculum Vitae or Resume - Your most recently updated C.V. or resume.

  
  

• Cover Letter - Please discuss prior teaching experience, teaching approach, and other/future teaching interests. This can include, for example, specific efforts, accomplishments, and future plans to support the success of all students through inclusive curriculum, classroom environment, and pedagogy.
  
  (Optional)

  
  

• Sample Syllabi and/or Teaching Evaluations (Optional)

  
  

• 
  
• References are requested from candidates at the interviewing stage, and references are only contacted for finalists.
  

Help contact:

UC Berkeley is committed to diversity, equity, inclusion, and belonging in our public mission of research, teaching, and service, consistent with UC Regents Policy 4400 and University of California Academic Personnel policy (APM 210 1-d). These values are embedded in our Principles of Community, which reflect our passion for critical inquiry, debate, discovery and innovation, and our deep commitment to contributing to a better world. Every member of the UC Berkeley community has a role in sustaining a safe, caring and humane environment in which these values can thrive.

The University of California, Berkeley is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or protected veteran status.

For more information, please refer to the University of California's Affirmative Action and Nondiscrimination in Employment Policy and the University of California's Anti-Discrimination Policy.

In searches when letters of reference are required all letters will be treated as confidential per University of California policy and California state law. Please refer potential referees, including when letters are provided via a third party (i.e., dossier service or career center), to the UC Berkeley statement of confidentiality prior to submitting their letter.

As a University employee, you will be required to comply with all applicable University policies and/or collective bargaining agreements, as may be amended from time to time. Federal, state, or local government directives may impose additional requirements.

Unless stated otherwise, unambiguously, in the position description, this position does not include sponsorship of a new consular H-1B visa petition that would require payment of the $100,000 supplemental fee.

As a condition of employment, the finalist will be required to disclose if they are subject to any final administrative or judicial decisions within the last seven years determining that they committed any misconduct.

• 
  
• "Misconduct" means any violation of the policies or laws governing conduct at the applicant's previous place of employment, including, but not limited to, violations of policies or laws prohibiting sexual harassment, sexual assault, or other forms of harassment or discrimination, as defined by the employer.
  
• UC Sexual Violence and Sexual Harassment Policy
  
• UC Anti-Discrimination Policy
  
• APM - 035: Affirmative Action and Nondiscrimination in Employment
  

WHO WE ARE

Delta Engineers, Architects, & Surveyors (Delta) is a multidisciplinary AEC firm founded in upstate New York in 1976. Along with our corporate headquarters located near the intersection of Interstates 81, 86 and 88, Delta has additional offices across Central New York and Chevy Chase, MD, together with remote team members located across the US. We deliver engineering and architectural design services for multiple market sectors along with providing environmental, survey, landscape architecture, and ecological services to public and private clients located throughout the continental US. Delta team members take advantage of terrific opportunities to advance professionally in a supportive team-oriented culture while enjoying generous compensation and benefits package.

WHO WE NEED

We are seeking a versatile and team-oriented Structural Project Engineer in our Structural Team, ideally located in the Syracuse or Albany, NY area, or at our Endwell, NY office. Candidates located outside the designated office locations may qualify for full remote work, subject to company policy. The ideal candidate should have a Bachelor's Degree in Civil / Structural Engineering, with a minimum of 6 years of relevant experience. A PE is also required. Experience should include structural analysis, design, and detailing for concrete, steel, and aluminum structures. Experience with cable design is preferred.

The primary duties associated with this position include:

• The candidate should be proficient with the International Building Code (IBC); ASCE-7; ACI 318; ADM-2020; and AISC.
• Performing challenging 3-dimensional structural analyses and designs for a wide variety of clients using various state-of-the-art design software, including RISA 3D, SAP, RAM, and RISA Foundation.
• Responsible for serving as lead project engineer, i.e., taking responsibility for developing design, preparing detailed structural drawings using AutoCAD and REVIT, and specifications. This includes coordinating the work of junior team members and amongst other trades.
• Solving engineering problems using experience, judgment, and education and knowing when to ask for assistance when required.
• Write and review related reports for the services provided.
• Scoping projects and assisting project managers with proposal creation.
• Serving as a Quality Control reviewer for the designs of team members.
• Assisting the Team Leader in initiating, developing, and implementing continuous team improvement initiatives.
• Supporting structural work in our building projects within the Structural Facilities Group as workload warrants.
• Attending client meetings/presentations in the daytime or evenings.
• Communicating with client representatives, contractors, and suppliers.
• Participating in site visits/inspections/documentation during construction.
• Work on a variety of projects including schools, industrial facilities, commercial buildings, and governmental projects.
• This position requires an individual that has strong technical abilities with good organizational and communication skills, and the ability to work in a fast-paced market.

Additional duties will include preparing structural designs; prepare structural design summaries and detailed drawings using AutoCAD and REVIT; consider alternate designs and value engineering; and meeting scheduled project deadlines.

Delta is driven to exceed our clients' expectations on every project. Accordingly, the successful applicant for this position must be willing to occasionally work adjusted hours/overtime.

WHAT WE OFFER

Hiring Salary Range: $80,000-$110,000 (Salary to be determined by the applicant's education, experience, knowledge, skills, and abilities along with an internal equity and alignment with market area data.)

The following are a few of the benefits that we offer:

• Paid Holidays, Vacation, Sick time
• Health and Dental Insurance
• Optional Vision, LTD and Term Life Insurance
• Enhanced Short Term Disability
• 401K Retirement Plan
• Tuition Assistance Program
• Professional Licensing Reimbursement
• Recruitment Bonus Program

We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Our biotech client is seeking a Communications Project Manager to support Corporate Communications and R&D Communications in a part-time freelance capacity.

This is an ongoing 20 hours/week role with an expected duration of 6 months, with potential to extend. This position is fully remote and you will be reporting directly to the VP, Enterprise Communications.

The Communications Project Manager will serve as an operational and organizational engine for two fast-moving communications teams. This role ensures projects progress on schedule, leadership receives accurate and timely reporting, and executive-ready materials are consistently delivered. The ideal candidate is proactive, highly organized, experienced in cross-functional communications, and comfortable working directly with senior leaders.

Responsibilities

• Compile weekly project updates for the VP to support executive staff meeting discussions.
• Prepare and maintain monthly team reports for Corporate Communications and R&D Communications.
• Build quarterly business reviews (QBRs), consolidating inputs from multiple workstreams into executive-ready presentations.
• Create and update executive briefing books (1-2 per week), synthesizing complex information into clear, strategic narratives.
• Attend weekly team meetings (Wednesdays at 10 AM PST and Thursdays at 11 AM PST), maintaining agendas, tracking follow-ups, and ensuring all commitments are completed.
• Coordinate project inputs across cross-functional partners; track progress, identify risks, and flag blockers.
• Gather updates from stakeholders and ensure completeness, clarity, and alignment to team priorities.
• Synthesize themes across projects to identify patterns, insights, and strategic throughlines for reporting.
• Prepare materials in polished, executive-ready formats.
• Maintain project trackers, shared documents, and operational workflows across Airtable, OneNote, and Teams.
• Support the operational organization of both communications teams as they undergo structural changes, helping maintain consistency, accountability, and predictable information flow.

Requirements

• Minimum of 3 years of experience in project management, communications, executive support, or similar roles
• Experience supporting executive communications or communications teams.
• Strong organizational skills with demonstrated success managing multiple deadlines and stakeholder inputs.
• Proactive, self-starting working style with a Type A attention to detail.
• Exceptional written communication skills and comfort preparing executive-level materials.
• Ability to confidently engage senior leaders to request updates, clarify details, and push for high quality inputs.
• Comfortable synthesizing information and identifying key themes, insights, and priorities.
• Strong collaboration skills and a personable, professional presence.

Software Required:

• Airtable
• Workfront
• PowerPoint
• OneNote

In this position, you may have access to client or customer systems, confidential and/or proprietary information or data, including medical data.

Benefits