Engineering Jobs in West Memphis, AR

SUMMARY
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. · Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· May provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy. MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university preferred; or related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time. WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.

When warfare moves at the speed of technology, we need personnel who can always keep us one step ahead of our enemies. As an Information Professional Officer, you lead your team of Enlisted Information Systems Technicians to ensure the delivery of communications capabilities by operating, maintaining and securing our networks around the globe. Assist with top secret cyberwarfare missions and discover tactical and strategic advantages afloat and ashore. IPO is a big job, but your team will always have your back.

Want to start your journey with the Navy?

Apply Now

Officer None

What to Expect

Information Professional Officer

More Information

Responsibilities

Information Professional Officers (IPOs) oversee the seamless operation of the global Naval network environment. Their responsibilities include:

• Leading the Naval network warfare missions in developing tactics and procedures to realize tactical, strategic and business advantages afloat and ashore
• Driving interoperability with joint, allied and coalition partners
• Building professional excellence through education, training and certification and milestone qualifications
• Optimizing organizational effectiveness through cutting-edge technologies, knowledge management techniques and a culture of innovation
• Helping to develop and deploy information systems, command and control and space systems
• Serving as a key part of the Information Dominance Corps in its mission to gain a deep understanding of the inner workings of adversaries
• Overseeing the work of Information Systems Technicians - Enlisted Sailors (no degree required) who serve as specialists in information technology

Work Environment

Information Professionals serve in challenging roles of increasing scope and responsibility both afloat and ashore. This could include:

• Serving as part of Battle Group staffs on ships at sea
• Working in C4I/Space/Surveillance on shore tours
• Serving on major Navy and joint staffs
• Serving in command of key communication and surveillance facilities around the globe

Training & Advancement

Those pursuing an Information Professional Officer position are required to attend Officer Candidate School (OCS) in Newport, RI.

Upon completion, candidates typically attend a five-week IP Basic Course of instruction in Pensacola, FL, before or during their initial assignment. IPOs must complete specific qualifications as part of their training during Fleet tours and are expected to pursue advanced education opportunities.

Promotion opportunities are regularly available but competitive and based on performance.

Post-Service Opportunities

Specialized training received and work experience gained in the course of service can lead to valuable credentialing and occupational opportunities in related fields in the civilian sector.

Education Opportunities

Wherever you are in your professional career, the Navy can help ease your financial burdens and advance your career with generous financial assistance and continuing education programs. Beyond professional credentials and certifications, Information Professional Officers can advance their education by:

• Pursuing opportunities at institutions such as Naval Postgraduate School (NPS) or Navy War College (NWC)
• Completing Joint Professional Military Education (JPME) at one of the various service colleges

Postgraduate education is important to the success of the Information Professional. Most IPs will complete a master's degree in C4I, space, information systems, computer science or modeling and simulation.

There's also potential to pursue a graduate certificate, DoW certifications, federal executive fellowships and information assurance scholarships and internships.

Qualifications & Requirements

A degree from a four-year college or university is a minimum educational requirement to become a Commissioned Officer. Candidates seeking an Information Professional Officer position must have a bachelor's degree from a regionally accredited institution in a technical field, preferably in one of following fields: Information Systems, Electrical Engineering, Computer Engineering, Information Operations, Computer Science, Systems Engineering, General Engineering.

All candidates must also be: U.S. citizens, willing to serve worldwide, eligible for a Top Secret/Sensitive Compartmented Information (SCI) security clearance and qualified for sea duty.

General qualifications may vary depending upon whether you're currently serving, whether you've served before or whether you've never served before.

Part-Time Opportunities

There are part-time opportunities available as an Information Professional Officer.

Serving part-time as a Navy Reserve Sailor, your duties will be carried out during your scheduled drilling and training periods. During monthly drilling, Information Professional Officers in the Navy Reserve typically work at a location close to their homes.

For annual training, Information Professional Officers may serve anywhere in the world, whether on a ship at sea or at bases and installations on shore.

Take a moment to learn more about the general roles and responsibilities of Navy Reserve Sailors.

Most of what you do in the Navy Reserve is considered training. The basic Navy Reserve commitment involves training a minimum of one weekend a month (referred to as drilling) and two weeks a year (referred to as Annual Training) - or the equivalent of that.

Information Professional Officers in the Navy Reserve serve in an Officer role. Before receiving the ongoing professional training that comes with this job, initial training requirements must first be met.

For current or former Navy Officers (NAVET): Prior experience satisfies the initial leadership training requirement - so you will not need to go through Officer Training again.

Officers who previously held a commission in another United States Military Service, National Oceanic and Atmospheric Administration, Public Health Service, or United States Coast Guard are exempt from attending ODS or LDO/CWO Academy.

Compare Navy Careers

See how a career as an Information Professional Officer compares to other Navy jobs.
Compare roles, pay and requirements for each job now.

SUMMARY
To assist the Quality Assurance function as technical support in issues affecting manufacturing. To support and drive corrective action efforts.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

· Ensure capability studies are performed on critical processes.
· Perform first article inspection and review visual aids.
· Perform defect analysis reporting.
· Perform MRB on sustained products.
· Participate in CAC meetings – support continuous improvement.
· Perform line and product audits.
· Assist Quality Engineering in APQP.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.

MINIMUM REQUIREMENTS
Bachelor's degree preferred; or equivalent combination of education and experience.

JOB SUMMARY

Industrial Engineer I will support the Industrial Engineering Department in planning, designing, implementing and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.
Main focus: conducts studies to determine the most efficient sequence of operations and workflow and recommends methods for maximum utilization of production equipment and personnel.

ESSENTIAL DUTIES AND RESPONSIBILITIES

· Monitor and continuously improve daily quality/efficiency performance for assigned areas.
· Design and procure production tooling, processing equipment and workstations.
· Coordinate layout and workstation move activities.
· Prepares time estimates for proposed projects and evaluates time factors.
· Minimize change over time by ensuring programs use common set-ups where possible.
· Verify that machine maintenance is being performed on schedule.
· Reduce machine-generated scrap by monitoring machine management data and taking corrective action to improve or correct the operations.
· Reduce manual assembly scrap by monitoring quality data and taking corrective action to improve or correct the operations.
· Analyzes work force utilization, facility layout, and operational data such as production costs, process flow charts, and production schedules, to determine efficient utilization of workers and equipment.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.

JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS

· Key Requirements:
o Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)
o Understanding of Jabil’s global strategies and direction
o Understanding of site’s facilities, capabilities and how they tie back to the Jabil strategies and direction
o Strong analytical ability
o Able to implement continuous improvements and cost reduction programs
o Good communication skills

· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.

JOB SUMMARY

Industrial Engineer I will support the Industrial Engineering Department in planning, designing, implementing and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.
Main focus: conducts studies to determine the most efficient sequence of operations and workflow and recommends methods for maximum utilization of production equipment and personnel.

ESSENTIAL DUTIES AND RESPONSIBILITIES

· Monitor and continuously improve daily quality/efficiency performance for assigned areas.
· Design and procure production tooling, processing equipment and workstations.
· Coordinate layout and workstation move activities.
· Prepares time estimates for proposed projects and evaluates time factors.
· Minimize change over time by ensuring programs use common set-ups where possible.
· Verify that machine maintenance is being performed on schedule.
· Reduce machine-generated scrap by monitoring machine management data and taking corrective action to improve or correct the operations.
· Reduce manual assembly scrap by monitoring quality data and taking corrective action to improve or correct the operations.
· Analyzes work force utilization, facility layout, and operational data such as production costs, process flow charts, and production schedules, to determine efficient utilization of workers and equipment.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.

JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS

· Key Requirements:
o Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)
o Understanding of Jabil’s global strategies and direction
o Understanding of site’s facilities, capabilities and how they tie back to the Jabil strategies and direction
o Strong analytical ability
o Able to implement continuous improvements and cost reduction programs
o Good communication skills

· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.

SUMMARY
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· May provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.

MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university preferred; or related experience and/or training; or equivalent combination of education and experience.

LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.

MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.

REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.

WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.

SUMMARY
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· May provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.

MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university preferred; or related experience and/or training; or equivalent combination of education and experience.

LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.

MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.

REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.

WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.

Job Title: Production Planner

Location: Jabil Memphis

The Production Planner is the starting point for all materials and production planning activities. This role is responsible for managing customer demand, driving requisitions for buyers, and ensuring the production floor has the materials needed to meet schedule requirements. The planner serves as the primary point of contact between Jabil and the customer’s materials leadership, requiring strong communication and collaboration skills.

This position is approximately 60% desk-based planning and 40% floor-based coordination, requiring comfort working directly with materials technicians and production supervisors.

What can you expect to do?

- Serve as the customer-facing liaison for demand planning and shipment coordination.

- Manage demand signals and translate them into actionable requisitions for the purchasing team.

- Use and navigate three planning systems: SAP, PRISM, and Asprova.

- Collaborate with the production floor team to ensure timely material availability, understand shortages, and track material arrival dates.

- Work directly on the production floor with materials technicians and their supervisors to resolve issues and maintain schedule integrity.

- Maintain and analyze Bills of Materials (BOMs) and Engineering Change Notices (ECNs).

- Monitor and present planning metrics to Business Units (BU) and drive continuous improvement.

- Re-evaluate min/max levels for bulk materials to optimize inventory and production flow.

- Collaborate cross-functionally with buyers, production teams, and customer contacts to ensure alignment and responsiveness.

- Comply with all company policies and procedures, including security and operational standards.

- May perform other duties and responsibilities as assigned.

What is the experience needed to be successful in this role?

- Bachelor’s degree preferred but not required in Supply Chain, Business, Engineering, or related field.

- Thorough knowledge of ERP/MRP systems; experience with SAP, PRISM, and Asprova preferred.

- 2+ years of production planning experience in a manufacturing environment.

- Experience working with metal commodities such as copper, steel, and hardware is preferred.

- Advanced PC skills including Microsoft Office; intermediate Excel skills required.

- Strong understanding of BOMs and ECNs in a high-volume, multi-part environment.

- Ability to read and interpret technical documents and procedures.

- Strong verbal and written communication skills, especially in customer-facing scenarios.

- Ability to work with cross-functional teams and solve problems involving multiple variables.

- Strong analytical skills including basic algebra, geometry, and business math.

- Proficient in logistics planning to support business goals and drive strategic execution.

- Comfortable working in both office and production floor environments.

Benefits Package with Jabil

Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:

- Competitive Base Salary

- Site Performance Bonus

- Long Term Incentives

- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options

- 401K Match

- Employee Stock Purchase Plan

- Paid Time Off

- Tuition Reimbursement

- Life, AD&D, and Disability Insurance

- Commuter Benefits

- Employee Assistance Program

- Pet Insurance

- Adoption Assistance

- Annual Merit Increases

- Community Volunteer Opportunities

How Will You Make An Impact?

To be a technical focal point to monitor and work supplier quality issues directly with the manufacturer and communicate status on non-conforming parts/suppliers across all programs. Evaluate supplier performance, determine appropriate Inspection processes and provides guidance to Receiving Inspection function at the site level.

Location:

This role will be based on-site at our Memphis, TN facility.

What Will You Do?

- Serve as the focal person for commodity related quality and functional issues that stem from components being purchased for manufacturing.

- Ensure that all production critical supplier issues are resolved in a timely manner, and corrective actions are implemented correctly.

- Serve as the point of contact for Inspection Plans and Inspection Methods, and provide guidance to Receiving Inspection Auditors.

- Ensuring ongoing site supplier evaluation is performed; This would be achieved by using site information collected from Receiving Inspection, MRB, Customer Returns, SCAR database and by liaison efforts with customer work cells.

- Performance will be reported internally, to the supplier, and to the customer where applicable.

- Perform supplier audit interfacing with Corporate SQE if applicable.

- To provide documentation to perform Inspection of components per Inspection Plans in SAP.

- Monitor and drive PPM issues with the supply base in addition to helping them achieve “Dock to Stock” certified with Jabil (in accordance to the vendor performance system).

- Drive supplier selection strategies that will yield a supply base that can be used across all customer programs providing leverage cost savings.

- Proactively communicate information or issues that may impact the product costs of manufacturability to all affected departments.

- Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.

- Comply and follow all procedures within the company security policy.

How Will You Get Here?

Education:

- Bachelor’s degree in Industrial Engineering or related field preferred.

Experience:

- 0-2+ years of experience in Quality or Manufacturing Engineering.

- Or an equivalent combination of education, experience, and/or training.

What Can Jabil Offer You?

Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:

- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options

- 401K Match

- Employee Stock Purchase Plan

- Paid Time Off

- Tuition Reimbursement

- Life, AD&D, and Disability Insurance

- Commuter Benefits

- Employee Assistance Program

- Pet Insurance

- Adoption Assistance

- Annual Merit Increases

- Community Volunteer Opportunities