Engineering Jobs in Wakefield Washington County Ri Remote

POSITION SUMMARY:
The Pipe Welder will participate in the installation or maintenance and inspection of HVAC, Utility and Process piping systems.
POSITION RESPONSIBILITIES:

• Regular attendance at assigned location; may include the A/Z fabrication facility or other project sites;
• Works on systems that include Heating Hot Water, Chilled Water, Steam, Condensate, Compressed Air, Process Fluids, Chemical, Fuel Oil, Gasses, and other related systems;
• Works with materials that include carbon steel, stainless steel, plastics, fiberglass, copper, (brazed, soft soldered and pro-press);
• Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
• Remove rough spots from work pieces, using portable grinders, hand files, or scrapers.
• Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment.
• Weld pipe and components in flat, vertical, or overhead positions using open root butt weld, socket weld and/or fillet weld.
• Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding.
• Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
• Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
• Examine work pieces for defects and measures work pieces with straightedges or templates to ensure conformance with specifications.
• Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreignmatter.
• Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
• Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
• Fill holes, and increase the size of metal parts.
• Detect faulty operation of equipment or defective materials and notify supervisors.
• Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
• Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.
• Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
• Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools.
• Clean or degrease parts, using wire brushes, portable grinders, or chemical baths.
• Mark or tag material with proper job number, piece marks, and other identifying marks as required.
• Position and secure work pieces, using hoists, cranes, wire, and banding machines or hand tools.
• Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations.
• Dismantle metal assemblies or cut scrap metal, using thermal-cutting equipment such as flame-cutting torches or plasma-arc equipment.
• Preheat work pieces prior to welding or bending, using torches or heating furnaces.
• Hammer out bulges or bends in metal work pieces.
• Develop templates and models for welding projects, using mathematical calculations based on blueprint information.
• Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments.
• Cut, contour, and bevel metal plates and structural shapes to dimensions as specified by blueprints, layouts, work orders, and templates, using powered saws, hand shears, or chipping knives.
• Estimate consumable materials needed for production and manufacturing and maintain required stocks of materials.
• Set up and use ladders and scaffolding as necessary to complete work.
• Use fire suppression methods in industrial emergencies.
• Detect faulty operation of equipment or defective materials and notify supervisors;
• Direct helpers or apprentices in appropriate tasks;
• Must maintain strict adherence to safety rules and quality;
• Participate in site housekeeping;
• Interact with co-workers in an attentive courteous manner;
• Additional duties as directed by management.
  

SKILLS & EXPERIENCE/REQUIREMENTS:

• Ability to work independently or as part of a team;
• Experience: 5 years of Field Experience, trade school or apprenticeship;
• Knowledge of materials, methods and tools involved in industrial construction;
• Attention to detail;
• Ability to keep hand and arm steady;
• Be highly focused on customer satisfaction expectations;
• Good documentation and record keeping;
• Preparation of miscellaneous paperwork including time sheets, daily reports and material requests;
• Competency in Permit Required Confined Space;
• Understanding of and strict adherence to daily Job Hazard Analysis (JHA);
• Appropriate state certification or license;
• OSHA 10 certification.
  

PHYSICAL DEMANDS & WORK ENVIRONMENT:
The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
PHYSICAL DEMANDS:
Ability to perform tasks in all aspects of construction sites; ability to climb ladders and crawl as needed; ability to work from aerial lifts; ability to lift and manipulate objects of up to 50 lbs.
WORK ENVIRONMENT:

• Industrial manufacturing facilities Power generating facilities
• Chemical manufacturing Healthcare & Institutional
• Pharmaceutical facilities including GMP - Aseptic and non-Aseptic Areas and Non GMP Areas Commercial and offices spaces
  

Peckham Industries

Location: North Kingstown, RI

Pay Range: $24.00 - $26.00

Salary Interval: Full Time

Description: Application Instructions

About Us:

Peckham Industries Inc. (PII) has been a family-run business since 1924 and we believe our “family by choice” ethos delivers value as the trusted supplier of construction materials, products, and services in the communities we serve. Through our extensive network of hot mix asphalt and ready-mix concrete plants, quarries, and liquid asphalt terminals, PII delivers the highest quality materials and custom solutions to thousands of road construction and road maintenance customers. In addition, the company’s construction operations include paving and road reclamation services, as well as precast/prestressed concrete production and erection of multi-level parking structures, specialty buildings, and bridge components.

Become part of our mission by realizing your purpose, serving our community interests, and delivering growth for our customers. Peckham Industries educates, innovates, and applies technology in a way that is safe, sustainable, inclusive, and profitable.

Position Description

Job Summary:

The Quality Control Technician plays a critical role in supporting continuous production and ensuring compliance with State, Federal, and local specifications in our Hot Mix Asphalt (HMA) operations. This position requires a mechanically inclined, hands-on individual who is experienced and comfortable working in manual labor environments using tools, equipment, and machinery. Based at Peckham’s asphalt plant, the role also includes field work involving the collection of samples at local and regional paving sites where HMA is being placed.

Essential Functions:

1. Protect Family and Friends. Follow all Company Safety Policies and Procedures as well as Occupational Safety and Health Administration (OSHA) regulations and guidelines. Support business activities, objectives, and programs.
2. Mastery. Reliably perform all required HMA materials testing in accordance with the procedures outlined in Peckham Industries' Quality Control Program, with a focus on producing the highest quality product in the most cost-effective manner. Conduct asphalt mix testing such as gradation, asphalt content, volumetrics, and temperature checks, and accurately input results into the QC software program.
3. Ownership and caring. Maintain a strong understanding of asphalt plant production equipment and facility operations to identify, diagnose, and assist in correcting production deficiencies. Collaborate with plant management and equipment operators, maintaining awareness of production and maintenance schedules. Observe and participate in on-site HMA testing, including mat density, temperature, and compaction monitoring.
4. Communicate test results and any quality-related concerns promptly and consistently to plant management to support informed decision-making and continuous quality improvement. Act as a liaison between paving crews, contractors, and dispatch, ensuring smooth communication regarding mix quality and production timelines.
5. Results matter. Document all quality control testing clearly, accurately, and in a timely manner. Maintain a database of daily test results and ensure the testing environment is clean and safe. Ensure that laboratory equipment is properly maintained and in good working order.
6. Respect and engage. Serve as a resource to the sales team, customers, paving crews, and plant management by offering technical support and assistance related to HMA quality and performance. Recommend and assist with adjustments to mix designs or production processes to ensure compliance with job specifications.
7. Dedication. Collect and prepare HMA samples at the plant and job sites in accordance with specification requirements, including loose mix and compacted specimens for quality verification and acceptance testing.
8. Committed to serve. Perform testing of fine and coarse aggregate gradations, asphalt binder properties, and reclaimed asphalt pavement (RAP) materials, increasing testing frequency when materials fall outside of specifications. Maintain inventory of mix additives, fibers, and other specialty materials used in asphalt production.

Position Requirements

Requirements, Education and Experience:

1. Degree in construction, engineering, or related fields is preferred but not required.
2. Experience in Hot Mix Asphalt or a relatable field is encouraged. 3-5 Years of relatable knowledge preferable.
3. Must have the flexibility to work irregular hours, including days, evenings, overnights, and occasional weekends, based on customer schedules and business needs, particularly during paving operations.
4. Must currently hold or be willing to obtain applicable asphalt-related certifications (e.g., NETTCP, ACI Asphalt, or State DOT certifications, as applicable).
5. Must have experience working in hands-on, manual labor environments.
6. Comfortable using mechanical tools, equipment, and machinery.
7. Must maintain a valid driver’s license and have reliable transportation.
8. Proficient in English literacy and basic computational math; clear verbal and written communication is essential.
9. Must be computer literate and proficient in Microsoft Word, Excel, and email communications.
10. Must have legal authorization to work in the United States.

Other Duties:

Please note that this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Travel:

Some travel throughout the service region is required, using a personal vehicle to access various plant and job site locations.

Work Environment/Physical Demands:

Medium Work; Exerting up to 50lbs of force occasionally, and/or up to 20lbs of force frequently, and/or up to 10lbs of force constantly to move objects. This position works on or near moving mechanical parts and loud equipment. Requires the ability to sit or stand for long periods of time as well as lifting, bending, kneeling, squatting, climbing, walking, reaching, driving, and repetitive motion.

Values:

At Peckham, you will experience our values wherever you work: corporate offices, plants, quarries, or paving operations. We share a common set of values - safety, integrity, dedication, and efficiency which are embedded in how we show up every day. Ours is a culture where we protect family and friends, our word is our bond, we are committed to serve and results matter. Our values are the foundation of our growth, and we believe we will pave the way for future success.

Equal Opportunity Employer

Peckham Industries, Inc. (PII) is an Equal Employment Opportunity (EEO) and Affirmative Action employer. It is our policy to provide EEO to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, pregnancy or pregnancy-related condition, or any other characteristic protected by federal, state or local law.

Under the Americans with Disabilities Act or similar law, if you have a disability and you wish to discuss potential accommodations related to applying for employment at Peckham, please contact

Compensation details: 24-26 Hourly Wage

PIc6c2d7ee782f-3631

Growing company/ Excellent Opportunity This Jobot Job is hosted by: Billy Mewton Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.

Salary: $120,000
- $150,000 per year A bit about us: Jobot is seeking an experienced EMC & Compliance Engineer to support one of our clients in the electronics and technology sector.

This role is responsible for ensuring that products meet electromagnetic compatibility (EMC) and regulatory compliance standards across domestic and international markets.

The ideal candidate will have a deep understanding of regulatory requirements, hands-on testing experience, and the ability to guide product development teams through the compliance lifecycle.

Why join us? Work life balance! Incredible growth!! Paid time off Amazing Health Benefits Life Insurance Disability coverage 401(k) Job Details Job Details We are on the hunt for a talented and experienced EMC & Compliance Engineer to join our dynamic team in the manufacturing industry.

This is a permanent position that offers a unique opportunity to work with cutting-edge technologies and a team of highly skilled professionals.

The successful candidate will be responsible for ensuring our products meet the necessary EMC and regulatory compliance standards.

The role requires a deep understanding of UL, CSA, & IEC standards, and a proven ability to design PCB layouts and shielding for EMC mitigation.

Responsibilities As an EMC & Compliance Engineer, you will: 1.

Plan, develop, and execute EMC compliance tests for new and existing products.

2.

Analyze and interpret test data, preparing comprehensive and detailed reports.

3.

Collaborate with the design team to develop PCB layout and shielding designs for EMC mitigation.

4.

Troubleshoot test setups and product designs, identifying and resolving any potential issues.

5.

Ensure all products are compliant with relevant UL, CSA, & IEC standards.

6.

Stay up-to-date with the latest industry standards and regulations, ensuring our products remain compliant.

7.

Work closely with cross-functional teams to ensure efficient and effective implementation of EMC compliance strategies.

8.

Provide technical guidance and support to the product development team.

Qualifications The ideal candidate should possess: 1.

A Bachelor's degree in Electrical Engineering or a related field.

2.

A minimum of 5 years of experience in EMC testing and compliance, preferably in the manufacturing industry.

3.

Extensive knowledge of UL, CSA, & IEC standards.

4.

Proficiency in PCB layout and shielding design for EMC mitigation.

5.

Strong troubleshooting skills, with the ability to identify and resolve issues effectively.

6.

Excellent communication and interpersonal skills, with the ability to work well in a team.

7.

A keen eye for detail and a commitment to maintaining high-quality standards.

8.

Strong analytical and problem-solving skills, with the ability to interpret complex data.

9.

The ability to handle multiple tasks simultaneously and meet deadlines in a fast-paced environment.

10.

A proactive approach, with the ability to stay up-to-date with the latest industry standards and regulations.

This is an exciting opportunity for a seasoned EMC & Compliance Engineer to make a significant impact in a dynamic and innovative manufacturing company.

If you have the necessary skills and experience, and you are ready for a new challenge, we would love to hear from you.

Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.

Jobot is an Equal Opportunity Employer.

We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.

Jobot also prohibits harassment of applicants or employees based on any of these protected categories.

It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.

Sometimes Jobot is required to perform background checks with your authorization.

Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.

Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.

By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.

Frequency varies for text messages.

Message and data rates may apply.

Carriers are not liable for delayed or undelivered messages.

You can reply STOP to cancel and HELP for help.

You can access our privacy policy here: /privacy-policy

Growing company/ Great Benefits/ $$$ This Jobot Job is hosted by: Billy Mewton Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.

Salary: $90,000
- $130,000 per year A bit about us: Jobot is seeking an experienced Senior PCB Designer for a leading [industry type] company known for innovation and high-quality product development.

The ideal candidate will be a highly skilled PCB layout specialist with a deep understanding of design for manufacturability, signal integrity, and compliance requirements.

This is an excellent opportunity for a PCB professional who wants to work on complex, cutting-edge projects in a collaborative engineering environment.

Why join us? Work life balance! Incredible growth!! Paid time off Amazing Health Benefits Life Insurance Disability coverage 401(k) Job Details Job Details: We are currently seeking a dynamic, highly-skilled Senior PCB Designer to join our innovative Manufacturing team.

The ideal candidate will be responsible for designing and implementing complex printed circuit boards (PCBs) that meet the technical and functional requirements of our cutting-edge products.

This role will provide you with the opportunity to work closely with a team of engineers and technicians to develop and implement design strategies that enhance product performance, durability, and overall functionality.

Responsibilities: Design and layout complex, multi-layer PCBs using CAD tools, ensuring optimal performance and adherence to industry standards.

Generate and maintain PC board Bill of Materials (BOM) and manage proto processing.

Collaborate with the engineering team to define PCB design parameters and requirements.

Implement and manage electro/mechanical components and drafting methods within the design process.

Oversee PCB fabrication processes to ensure quality and efficiency.

Conduct thorough testing and analysis of PCB designs, documenting results and making necessary modifications to enhance performance.

Ensure all PCB designs meet the required safety and environmental standards.

Keep up-to-date with the latest PCB design methodologies, tools, and industry trends.

Provide technical support and guidance to junior PCB designers and other team members.

Qualifications: Associates degree in Electrical Engineering, Electronics, or a related field.

Minimum of 7 years of experience in PCB design, preferably in the manufacturing industry.

Proficiency in CAD tools for PCB design and layout.

Demonstrated experience with PC board BOM, proto processing, electro/mechanical components, and drafting methods.

Extensive knowledge of PCB fabrication processes and industry standards.

Strong analytical skills, with a keen eye for detail and problem-solving abilities.

Excellent communication and teamwork skills, with the ability to work effectively in a collaborative environment.

Ability to manage multiple projects simultaneously and meet tight deadlines.

A commitment to continuous professional development and staying updated with the latest industry trends.

Join our team and contribute your expertise to the creation of innovative products that truly make a difference.

This is an exciting opportunity for a seasoned PCB Designer who is ready to take on a challenging and rewarding role in a fast-paced, technologically advanced environment.

Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.

Jobot is an Equal Opportunity Employer.

We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.

Jobot also prohibits harassment of applicants or employees based on any of these protected categories.

It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.

Sometimes Jobot is required to perform background checks with your authorization.

Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.

Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.

By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.

Frequency varies for text messages.

Message and data rates may apply.

Carriers are not liable for delayed or undelivered messages.

You can reply STOP to cancel and HELP for help.

You can access our privacy policy here: /privacy-policy

Growing Company/ Excellent Benefits/ $$$ This Jobot Job is hosted by: Billy Mewton Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.

Salary: $50,000
- $70,000 per year A bit about us: Our staffing agency is seeking a skilled Test Technician with PCB (Printed Circuit Board) experience to support one of our leading clients in the electronics/manufacturing industry.

The ideal candidate will have hands-on experience with PCB assembly, testing, troubleshooting, and repair, ensuring that products meet strict quality and performance standards.

Why join us? Work life balance! Incredible growth!! Paid time off Amazing Health Benefits Life Insurance Disability coverage 401(k) Job Details Job Details: Are you passionate about technology and innovation? Do you have a knack for problem-solving and troubleshooting? If so, we have an exciting opportunity for you! We are seeking a highly skilled and experienced Permanent Test Technician to join our dynamic team in the manufacturing industry.

This role is pivotal in ensuring the quality and reliability of our products and services.

The ideal candidate is someone who has a strong technical understanding, is detail-oriented, and has a keen eye for identifying and resolving issues.

Responsibilities: As a Permanent Test Technician, you will be responsible for: 1.

Conducting routine tests and inspections on products to ensure they meet the established standards and specifications.

2.

Using your expertise in Soldering, Through Hole, and SMT to troubleshoot and resolve any issues that may arise during the testing process.

3.

Collaborating with the engineering team to identify and implement improvements to the testing procedures and processes.

4.

Documenting and reporting on testing results, providing detailed and accurate information on any defects or issues identified.

5.

Maintaining and calibrating testing equipment to ensure it remains in optimal working condition.

6.

Adhering to all safety protocols and procedures to ensure a safe and productive work environment.

7.

Providing technical support and guidance to other team members as needed.

Qualifications: To be successful in this role, you will need: 1.

A minimum of 5 years of experience as a Test Technician in the manufacturing industry.

2.

Proven expertise in Soldering, Through Hole, and SMT.

3.

Strong analytical and problem-solving skills, with the ability to troubleshoot complex technical issues.

4.

Excellent attention to detail, with the ability to identify even the smallest of defects or issues.

5.

Strong communication and interpersonal skills, with the ability to work effectively both independently and as part of a team.

6.

A strong understanding of safety protocols and procedures in the manufacturing industry.

7.

The ability to manage multiple tasks and priorities in a fast-paced environment.

This is a fantastic opportunity to apply your skills and experience in a challenging and rewarding role.

If you are a dedicated and driven professional with a passion for technology and innovation, we would love to hear from you.

Apply today and take the next step in your career! Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.

Jobot is an Equal Opportunity Employer.

We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.

Jobot also prohibits harassment of applicants or employees based on any of these protected categories.

It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.

Sometimes Jobot is required to perform background checks with your authorization.

Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.

Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.

By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.

Frequency varies for text messages.

Message and data rates may apply.

Carriers are not liable for delayed or undelivered messages.

You can reply STOP to cancel and HELP for help.

You can access our privacy policy here: /privacy-policy

US-CA-GOLETA-H01 ~ 6380 Hollister Ave ~ BLDG H01 Position Role Type:
Citizen, U.Person, or Immigration Status Requirements:
S. government issued security clearance is required prior to start date.​ S. citizens are eligible for a security clearance​ Security Clearance Type:
Secret Security Clearance Status:
Active and existing security clearance required on day 1

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Raytheon is seeking a talented and motivated Senior Systems Integration and Test II Engineer to join our team within the Systems Engineering and Test Capabilities (SETC) Discipline, supporting various Electronic Warfare (EW) and Radar Warning Receiver (RWR) Systems. This role offers a unique opportunity to work across the full lifecycle of the product, from concept to deployment.

Every day will bring new challenges, requiring you to collaborate across disciplines to troubleshoot issues, perform data analysis, and implement solutions. The Systems Integration & Test II Engineer provides comprehensive systems engineering and integration test support by assessing program needs, planning and coordinating test activities, developing schedules, and executing test efforts from project initiation through system transition. The role involves addressing a wide range of technical challenges that require thorough information gathering, detailed analysis, and investigative problem‑solving to identify root causes and determine effective resolutions.

The following responsibilities are expected though not limited to for a Senior Systems Integration & Test II Engineer (EW)
Generate test plans/procedures for assessing Electronic Warfare (EW) system performance
Execute in-house and off-site test activities for system demonstrations and/or system sell-off.
Brief senior program management and engineering leadership.
Test EW hardware and software builds.

Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) discipline (preferably Systems Engineering, Electrical Engineering, Software Engineering or Physics) and a minimum of 2 years of prior relevant experience
S. government issued Secret security clearance is required prior to start date. S. citizens are eligible for a security clearance

Experience writing requirements for EW/Radar system test events
Experience leading system test equipment and special test equipment development activities
Experience troubleshooting, testing, and integrating EW/Radar system test equipment
Experience modeling the performance of EW/Radar systems
Experience with integration of mixed signal modules into the next higher assembly
Experience with security requirements related to government testing
Familiarity with Model-Based Systems Engineering (Cameo Enterprise Architecture), specifically using SysML. Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. Relocation Eligible – relocation assistance available for this position 

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Remote working/work at home options are available for this role.

Date Posted:

2026-02-27

Country:

United States of America

Location:

US-TX-MCKINNEY-513WZ ~ 2501 W University Dr ~ WING Z BLDG

Position Role Type:

Onsite

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

The ability to obtain and maintain a U.S. government issued security clearance is required.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Security Clearance Type:

DoD Clearance: Secret

Security Clearance Status:

Active and existing security clearance required after day 1

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The Senior Data Manager identifies all data deliverables made part of a contract and subsequently builds a data track in a Product Data Management (PDM) system. The DM identifies, with help from the Program Office, the appropriate preparers, receive the data within PDM, reviews the data for compliance, solicits and secures appropriate programmatic approval and delivers the information to the customer on time, throughout the lifecycle of the contract.

In addition, DMs are responsible for reviewing sub-tier contractor requirements, building data tracks for supplier submissions, receiving data from various suppliers, and routing for approval and/or incorporation into prime contractor deliverables to the customer as well as securing non-deliverable program work products to be configuration controlled in the PDM system and other related tasking.

This position is in McKinney Texas

What You Will Do

• Reading contracts for understanding of the deliverables
• Working in a PDM system to capture, manage, and track data deliverables and/or receivables
• Coordinating with cross-functional teams to obtain requested data
• Proofreading data for compliance to the requirement(s)
• Managing the data deliverable schedule and providing the data to the customer on-time
• Learning and understanding contractually required markings applied to data
• Running forecast reports and providing them to the appropriate stakeholders
• Providing metrics related to on-time deliveries and outstanding dispositions upon request
• Reviewing and approving sub-tier supplier statements of work for data requirements
• Supporting program meetings and providing training to program personnel and customers and/or suppliers
• Handling and protection of Company Intellectual Property (IP) as well as U.S. government IP and classified information

Qualifications you must have

• Bachelor’s degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years prior relevant experience OR a related Associate’s degree and 4 years of relevant experience OR in absence of a degree, 6 years of relevant experience
• Minimum of 2 years’ experience related to data management and/or equivalent professional experience
• Minimum of 2 years’ experience in a customer support/service role 

Qualifications We Value

• Knowledge of U.S. government defense contracts
• Knowledge of U.S. government specifications and instructions such as the Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS), Data Item Descriptions (DIDs), Department of Defense (DoD) Instruction 5230.24 Distribution Statements on Technical Documents, National Industrial Security Program Operating Manual (NISPOM) (DoD 5220.22-M)
• Collaborate in a team environment
• Self-motivated and detail oriented
• Proven excellent oral and written communication and presentation skills
• Excellent proofreading skills

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
• Relocation Eligibility

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.
  • Onsite : Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Remote working/work at home options are available for this role.

Date Posted:

2026-02-27

Country:

United States of America

Location:

US-TX-MCKINNEY-513WZ ~ 2501 W University Dr ~ WING Z BLDG

Position Role Type:

Onsite

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

The ability to obtain and maintain a U.S. government issued security clearance is required.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Security Clearance Type:

DoD Clearance: Secret

Security Clearance Status:

Active and existing security clearance required after day 1

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The Senior Data Manager identifies all data deliverables made part of a contract and subsequently builds a data track in a Product Data Management (PDM) system. The DM identifies, with help from the Program Office, the appropriate preparers, receive the data within PDM, reviews the data for compliance, solicits and secures appropriate programmatic approval and delivers the information to the customer on time, throughout the lifecycle of the contract.

In addition, DMs are responsible for reviewing sub-tier contractor requirements, building data tracks for supplier submissions, receiving data from various suppliers, and routing for approval and/or incorporation into prime contractor deliverables to the customer as well as securing non-deliverable program work products to be configuration controlled in the PDM system and other related tasking.

This position is in McKinney Texas

What You Will Do

• Reading contracts for understanding of the deliverables
• Working in a PDM system to capture, manage, and track data deliverables and/or receivables
• Coordinating with cross-functional teams to obtain requested data
• Proofreading data for compliance to the requirement(s)
• Managing the data deliverable schedule and providing the data to the customer on-time
• Learning and understanding contractually required markings applied to data
• Running forecast reports and providing them to the appropriate stakeholders
• Providing metrics related to on-time deliveries and outstanding dispositions upon request
• Reviewing and approving sub-tier supplier statements of work for data requirements
• Supporting program meetings and providing training to program personnel and customers and/or suppliers
• Handling and protection of Company Intellectual Property (IP) as well as U.S. government IP and classified information

Qualifications you must have

• Bachelor’s degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years prior relevant experience OR a related Associate’s degree and 4 years of relevant experience OR in absence of a degree, 6 years of relevant experience
• Minimum of 2 years’ experience related to data management and/or equivalent professional experience
• Minimum of 2 years’ experience in a customer support/service role 

Qualifications We Value

• Knowledge of U.S. government defense contracts
• Knowledge of U.S. government specifications and instructions such as the Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS), Data Item Descriptions (DIDs), Department of Defense (DoD) Instruction 5230.24 Distribution Statements on Technical Documents, National Industrial Security Program Operating Manual (NISPOM) (DoD 5220.22-M)
• Collaborate in a team environment
• Self-motivated and detail oriented
• Proven excellent oral and written communication and presentation skills
• Excellent proofreading skills

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
• Relocation Eligibility

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.
  • Onsite : Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Remote working/work at home options are available for this role.

US-TX-MCKINNEY-513WM ~ 2501 W University Dr ~ WING M BLDG Position Role Type:
Citizen, U.Person, or Immigration Status Requirements:
S. government issued security clearance is required.​ S. citizens are eligible for a security clearance Security Clearance Type:
Secret Security Clearance Status:
Active and existing security clearance required after day 1

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. Raytheon Engineering designs, produces, and builds new technologies and enhances existing capabilities to solve our customers’ most complex challenges. The Airborne Antenna Design Department is a team of engineers responsible for electrical design and development of RF products within Raytheon. Our charter is to provide expertise in sub-systems engineering, RF and radome design, digital apertures, antenna ranges and module test.

We are looking to add to our team and desire a Senior Technical Support Engineer to be part of a team that provides the most advanced end-to-end solutions that detect, track, engage and neutralize a broad range of threats. The role includes knowledge of RF product testing and associated RF test equipment, typically obtained through a University Degree program, or through work experience. May have practical knowledge of projects, programs and systems with the ability to make enhancements in daily work. 

Perform electrical engineering functions involving the layout, building, testing, troubleshooting, repairing and modification of electronic or electro-mechanical devices, assemblies, subsystems, and systems.
Perform analysis on production data, to determine root cause analysis of failures.
Be involved in planning and executing rework of production assemblies.
This 1st shift role will be 100% on-site and based in McKinney, TX.

Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior work experience to include any combination of the following:
S. government issued security clearance is required. S. citizens are eligible for a security clearance.

Active DoD Secret clearance with investigation within last five years.

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. This position offers relocation based on candidate eligibility.

Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Remote working/work at home options are available for this role.

Citizen, U.Person, or Immigration Status Requirements:
S. government issued security clearance is required prior to start date.​ S. citizens are eligible for a security clearance​ Security Clearance Type:
Secret Security Clearance Status:
Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Were expanding our engineering organization dramatically to meet exciting customer demand, and were actively looking for engineers who bring strong foundational skills and a passion for solving hard problems. Apply today and take the next step in your engineering career.

Raytheon is seeking a talented and motivated Systems Engineer to join our team within the Systems Engineering and Test Capabilities (SETC) Discipline, supporting a range of programs. This role offers a unique opportunity to work across the full lifecycle of the product, from concept to deployment

Every day will bring new challenges, requiring you to collaborate across disciplines to troubleshoot issues, perform data analysis, and implement solutions. The Systems Engineering and Test Center (SETC) organization is currently hiring a Systems Engineer II to join our Tucson, AZ location. SETC is an exciting and challenging environment where you will have the opportunity to design, develop and test to shape innovative solutions for our customers. Join our organization and experience the Systems V engineering life cycle while interfacing with a variety of engineering disciplines, subject matter experts, chief engineers, chief technologists, the customer, and so many more to ensure we design, integrate, test and strengthen our systems to work the first time and every time for our warfighters!

In this role, you will have the opportunity to work on an effectors project pertinent to the systems lifecycle. This role is 100% on-site at our Tucson, AZ campus.

In this Systems Engineer role, you may support some of the following types of activities:
Core Systems Engineering: Develop system architecture and model using Model Based Systems Engineering. Conduct trade studies based on Concept of Operations. Perform Test Planning: Develop and implement test plans, procedures, integration, and verification documentation in both simulated and real-world environments and perform/execute the testing
Integrate Systems: Collaborate with multi-disciplinary team to integrate hardware and software into tactical systems, evaluating their functionality and impact. Perform Platform Integration, Flight Test, Qualification, Design Verification Execution
Identify and resolve hardware, software, and system issues through detailed data analysis and debugging.
Perform Data Analysis: Conduct statistical and numerical analysis test data to ensure optimal system performance and verify requirements.
Support Missions: Travel as needed to support mission execution at various locations including local RTX facilities, test sites, vendor facilities, and customer locations.

Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM preferred) and a minimum of 2 years of prior engineering experience.
Ability to obtain Interim Secret U.S. government issued security clearance is required prior to start date.

tactics, techniques, and procedures, as well as Department of Defense customer infrastructure experience.
Understanding of the Systems Engineering product lifecycle
Experience with performing performance analysis and presenting analytical and technical material
Experience with DOORS, Cameo, or other digital engineering tools.
Experience with model-based engineering and associated tools
Experience working in an integration lab, test facility, or in the field, supporting integration and/or verification.
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. Relocation Eligible – Relocation assistance is available

This includes all production and maintenance employees, as they are essential to the development of our products.

~ This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS) , an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:  

~ As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Remote working/work at home options are available for this role.