Engineering Jobs in Villa Park Illinois

Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

ESSENTIAL FUNCTIONS

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment. Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I, IIand  Senior Biomed as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Compensation:

Pay Range: $47.23-70.84 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

ESSENTIAL FUNCTIONS

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment. Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I, IIand  Senior Biomed as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Compensation:

Pay Range: $47.23-70.84 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

ESSENTIAL FUNCTIONS

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment. Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I, IIand  Senior Biomed as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Compensation:

Pay Range: $47.23-70.84 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

ESSENTIAL FUNCTIONS

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment. Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I, IIand  Senior Biomed as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Compensation:

Pay Range: $47.23-70.84 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

About the Company

We are a dynamic and growing U.S. subsidiary of a leading Italian multinational manufacturing company. With a strong global presence and a commitment to innovation and excellence, we are seeking a Finance Manager to lead our financial operations in the U.S. and ensure alignment with the parent company’s financial strategy, reporting standards, and compliance requirements.

Position Summary

The Finance Manager will oversee all financial activities of the U.S. subsidiary, including budgeting, forecasting, financial reporting, compliance, and internal controls. This role requires strong collaboration with the Italian parent company to ensure accurate and timely consolidation of financial data, adherence to the U.S. GAAP, and alignment with global financial policies and international regulatory requirements.

Key Responsibilities

• Lead the monthly, quarterly, and annual financial close process.
• Prepare and analyze financial statements in accordance with U.S. GAAP
• Coordinate with the Italian parent company on group reporting, intercompany transactions, and transfer pricing.
• Develop and manage budgets, forecasts, and financial planning processes.
• Ensure compliance with local, state, federal, and international tax regulations, including reporting requirements and filings across multiple jurisdictions.
• Manage cash flow, banking relationships, and treasury functions.
• Implement and maintain internal controls, policies, and financial procedures.
• Liaise with external auditors, CPA firms, and other professional advisors to ensure compliance and support audits.
• Provide financial insights and recommendations to support strategic decision-making.
• Supervise and develop a small finance team.

Qualifications

• Bachelor’s degree in accounting, finance, or related field.
• 10+ years of progressive experience in finance or accounting, preferably in a multinational environment.
• Knowledge of U.S. GAAP, income tax and sales tax
• Excellent analytical, organizational, and communication skills.
• Ability to work cross-functionally and across cultures, especially with European counterparts.
• Proficiency in Italian is a plus but not required.

What We Offer

We offer a competitive and comprehensive benefits package, including:

• Competitive salary, with potential for annual performance-based bonus
• Comprehensive health insurance, including medical, dental, and vision coverage for employees and their dependents
• 401(k) retirement plan with company match, available after one year of employment with the Company
• Generous paid time off (PTO) and Paid Company Holidays
• Company-paid life and disability insurance
• Hybrid work options, depending on business needs
• Support for professional development, including training and continuing education opportunities
• Opportunity to work in a global environment with exposure to international finance
• Inclusive and collaborative workplace culture

Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or genetic information. #inauto

• Analyze market trends and develop customized targeted sales strategies. May lead projects or have accountability for ongoing activities.
• Make outbound calls to prospective customers to identify and create sales opportunities.
• Provide insight to leadership on plans and goals for sales.
• Persuade the customer to buy by demonstrating how Robertshaw products meet their needs.
• Mentor junior inside sales representatives, train new members of the team and aid in the evaluation of team's performance.
• Close sales and lead customers through purchasing processes.
• Understand customer needs and offer solutions and support.
• Use product knowledge and persuasion to overcome customer objections.
• Troubleshoot/resolve customer issues. Solve complex problems and take broad perspective to identify solutions. Interpret internal and external issues and recommend best solutions/practices.
• Provide assistance to Commercial Quoting team.

• 8years' experience in inside sales or similar sales/customer service role with proven record in sales and demonstrated ability to handle complex deals
• Proven track record of successfully meeting sales quotas over the phone
• Previous cold calling phone sales experience, comfort talking to new people all day
• Excellent verbal and written communication skills; the ability to call, connect and quickly engage with potential customers
• Specialized depth in sales.
• Energetic, professional, and friendly demeanor
• Ability to handle rejection and proceed on to the next potential customer with a positive attitude
• Ability to independently make decisions on pricing, terms or deal structure
• Results orientation
• Self-directedness
• Persistency and persuasiveness and strong negotiation skills
• Strong computer skills (Word, Excel, Outlook)

• Prior experience in white goods/appliance industry preferred

• Bachelor's degree in business or related field preferred

Mackie Consultants, LLC, a leading consultant in Civil Engineering and Land Surveying located in Rosemont, IL, has an opening for a Civil Design Engineer with 4+ years of experience. Selected candidate should possess entry level knowledge of site grading, stormwater management, sanitary sewer design, water supply systems and basic roadway design for private and public sector projects. Candidate should be able to handle a multitude of projects for clients in both the public and private sector.

Essential Duties and Responsibilities:

• Perform design and analysis for civil engineering projects using approved computer programs and manual computations in accordance with the accepted design practice.
• Work independently on design and production of construction plans, specification and cost estimates.
• Prepare design calculations quantity take-offs and cost estimates.
• Work closely with other disciplines on multi-discipline projects.
• Perform their own CAD work.
• Attend project meetings both internally and with clients.
• Assist Project Manager with project administrative activities, document controls and project scheduling.
• Other assignments as needed.

Key Qualifications:

• B.S. or M.S. in Civil Engineering.
• 4+ Years of experience.
• PE license preferred.
• Working knowledge and experience with state and regional regulations.
• Excellent written and oral communication skills.
• Knowledge of MicroStation preferred.
• Valid driver's license required.

Mackie Consultants is part of The Burke Group (TBG). We are a fast-growing family of 9 companies offering civil engineering and land surveying services throughout the Midwest. We offer a professional work environment as well as exceptional learning opportunities to those engineers committed to personal service and professional growth. We seek out experienced and responsive professionals who are committed to personal service. Mackie Consultants offers high growth potential and a comprehensive benefits package including medical, dental, life, disability, PTO days as well as an employer matching 401(k) program.

Mackie Consultants, LLC is an Equal Opportunity Employer It is the policy of Mackie Consultants, LLC to provide equal employment opportunity without regard to race, color, age, religion, sex, sexual orientation, national origin, marital status, changes in marital status, pregnancy, childbirth, or medical or common conditions related to pregnancy or childbirth, parenthood, creed, veteran's status, veteran's disability and physical or mental disability, citizenship status or unfavorable discharge from the military. Mackie Consultants, LLC intends that all matters related to recruiting, hiring, training, compensation, benefits, promotions, transfers, terminations and layoffs and recalls, as well as all Mackie Consultants, LLC sponsored social and recreational programs, and all treatment on the job, be free of unlawful discriminatory practices.

Director of Manufacturing Operations

Location: Hybrid / On-site (as required)

Reports to: COO

The Director of Manufacturing Operations is responsible for end-to-end manufacturing execution and scale for DeNova Detect’s life-safety product portfolio. This role ensures that products are built safely, on time, on cost, and in compliance, while building a resilient manufacturing ecosystem capable of supporting rapid growth across retail, commercial, utility, and legislative-driven demand.

This leader serves as the operational bridge between engineering, supply chain, quality, regulatory, and commercial teams, translating product strategy into reliable, scalable production.

Core Responsibilities

Manufacturing & Production Leadership

• Own global manufacturing strategy across internal and contract manufacturing partners
• Establish and manage production plans aligned with sales forecasts and launch timelines
• Ensure consistent achievement of cost, quality, delivery, and yield targets
• Lead capacity planning to support demand surges driven by retail promotions, legislation, or national media exposure
• Drive continuous improvement using Lean, Six Sigma, or similar methodologies

Contract Manufacturer & Supplier Management

• Select, onboard, and manage contract manufacturers (CMs) and key component suppliers
• Negotiate manufacturing agreements, pricing, lead times, and service-level expectations
• Implement performance scorecards for CMs and suppliers (OTIF, quality, cost, responsiveness)
• Conduct regular audits and business reviews to ensure compliance and risk mitigation

Quality, Compliance & Regulatory Readiness

• Ensure manufacturing processes comply with all applicable standards and certifications, including:
• UL /ETL (as applicable)
• State and federal life-safety regulations
• Partner with internal teams to support certifications, audits, and change control
• Ensure all NCE Quality Control metrics are met or exceeded
• Implement continuous improvement process for quality and manufacturing
• Own manufacturing-related corrective actions (CAPAs), root cause analysis, and preventive controls

New Product Introduction (NPI) & Scale-Up

• Lead manufacturing readiness for new product introductions from pilot builds through mass production
• Partner with Engineering on DFM/DFA, tooling decisions, and test strategies
• Establish production validation, ramp-up plans, and early yield stabilization

Cost Management & Margin Expansion

• Drive COGS reduction initiatives without compromising safety or quality
• Optimize labor, materials, tooling, and logistics costs
• Support margin expansion initiatives tied to volume growth and supplier consolidation

Risk Management & Business Continuity

• Identify and mitigate manufacturing risks (single-source suppliers, geopolitical risk, capacity constraints)
• Develop contingency plans for supply disruptions, demand spikes, or quality events
• Support inventory strategy decisions in collaboration with Supply Chain and Finance

Leadership & Cross-Functional Collaboration

• Serve as a key operational voice in executive planning and growth discussions
• Collaborate closely with our Japan Engineering Team, Sales and Marketing

Required Qualifications & Experience

• Bachelor’s degree in Engineering, Operations Management, or related field
• 10+ years of progressive experience in manufacturing operations, preferably in:
• Consumer electronics
• Life-safety, IoT, or regulated hardware products
• Proven experience managing contract manufacturers and global supply partners
• Strong working knowledge of regulated manufacturing environments
• Demonstrated success scaling production in high-growth environments

Preferred

• MBA or advanced degree
• Experience with UL-listed or safety-critical products
• Lean Six Sigma certification
• Experience supporting national retail or utility-driven distribution models

This role is critical to DeNova Detect’s ability to save lives at scale. As demand grows through retail expansion, legislative adoption, and national awareness campaigns, the Director of Manufacturing Operations ensures that every product shipped meets the company’s promise of safety, reliability, and trust.

Tool & Die Technician

Location: Franklin Park, Illinois

Overview

A manufacturing company in the Franklin Park area is seeking a Tool & Die Technician to support tooling and die maintenance within a production environment. This role is responsible for building, repairing, and maintaining tooling used in metal forming and fabrication processes.

The ideal candidate has experience working with stamping dies, tooling components, and precision machining equipment, and is comfortable troubleshooting tooling issues that impact production efficiency.

Key Responsibilities

• Build, repair, and maintain tooling, dies, and fixtures used in metal fabrication or stamping operations.

• Interpret engineering drawings, blueprints, and technical instructions to support toolroom activities.

• Diagnose tooling issues and perform repairs to maintain proper die function and reduce production downtime.

• Set up and operate toolroom equipment such as mills, lathes, grinders, drills, and related machining equipment.

• Inspect dies and tooling components for wear or damage and perform necessary maintenance or adjustments.

• Use precision measuring tools including micrometers, calipers, and gauges to verify tolerances and specifications.

• Disassemble, clean, and reassemble tooling components using appropriate hand tools and maintenance procedures.

• Support troubleshooting efforts related to tooling issues affecting production equipment.

• Perform routine maintenance on toolroom machinery and equipment.

• Maintain documentation related to tooling maintenance, repairs, and inspection activities.

• Assist with training or supporting junior technicians or apprentices when needed.

• Maintain a clean, organized, and safe work environment while following company safety policies.

Qualifications

• High school diploma or equivalent required; technical training or apprenticeship in tool and die or machining preferred.

• Approximately 1–3 years of experience working in tool and die, machining, or toolroom environments.

• Ability to read and interpret blueprints and engineering drawings.

• Mechanical aptitude and familiarity with machining and tooling equipment.

• Experience operating forklifts, hoists, or cranes in an industrial setting is helpful.

• Strong communication skills and the ability to work collaboratively within a manufacturing team.

Physical Requirements

• Ability to work scheduled shifts in a manufacturing environment.

• Frequent standing and movement throughout the workday.

• Ability to lift or move materials and tooling components up to approximately 70 pounds.

• Work performed in an industrial environment with exposure to machinery, noise, and shop conditions typical of metal fabrication operations.

Mechanical Assembler – Structural Enclosures

Pay: up to $30/hr

Shift: 1st Shift | Start as early as 6:00 AM

Type: Ongoing Contract (Strong potential for long-term or direct hire)

We are seeking a hands-on Mechanical Assembler to support the structural build of large industrial enclosure units. This is not a light assembly role—this position focuses on the full structural build process, starting with steel framework and finishing with the installation of exterior components such as siding, doors, and windows.

Candidates with structural assembly, construction, carpentry, or metal fabrication backgrounds are highly encouraged to apply. If you take pride in building things that are square, level, and built to last, this is a great opportunity to put your skills to work in a manufacturing environment.

Key Responsibilities

• Structural Assembly: Build large industrial enclosure units using heavy steel weldments and framework.
• Exterior Installation: Install siding, commercial doors, and windows using proper construction and sealing techniques.
• Blueprint Interpretation: Read and interpret mechanical drawings and blueprints to ensure proper assembly and tolerances.
• Precision Layout: Use measuring tools and leveling techniques to ensure enclosures are square, aligned, and weather-tight.
• Material Handling: Assist with positioning heavy steel frames and moving completed units within the facility.
• Quality & Efficiency: Maintain a strong sense of urgency while ensuring high-quality workmanship.

What We’re Looking For

• Experience in structural assembly, fabrication, construction, or carpentry
• Strong ability to read and interpret blueprints or fabrication drawings
• Experience installing siding, windows, doors, or structural components
• Familiarity with industrial fasteners, sealants, and installation techniques
• Must have a basic personal tool set (impact driver, tape measure, levels, wrenches, etc.)
• Strong communication and organization skills
• Basic electrical experience is a plus, but not required

Why This Role?

• Opportunity to work on large, custom-built industrial units
• Hands-on role where craftsmanship and precision matter
• Stable first shift schedule
• Potential to transition into a long-term or permanent position

If you enjoy building and assembling large structural systems and want to be part of a team that creates complex industrial equipment, we’d like to connect with you.

Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or genetic information.