Engineering Jobs in Ut Remote
276 positions found — Page 5
Copper Brazing Technician - High-Precision Skills (SALT LAKE CITY)
$45,200 - 81,400
Position Summary:
We are seeking a skilled and safety-conscious Copper Brazing Technician to join our manufacturing team. This role is responsible for performing precision brazing of copper components, interpreting blueprints, operating torches (Oxygen/Acetylene), and ensuring high-quality standards in product assembly. The technician will follow controlled brazing procedures/work instructions, maintain required documentation/traceability, and support leak/pressure testing and rework verification as part of production builds.
Key Responsibilities:
- Join copper components by heating them and applying filler metal to create strong, leak-proof bonds.
- Interpret blueprints and written instructions to ensure accurate assembly and placement of copper parts.
- Operate single- and dual-tip torches safely and effectively, maintaining precise heat control throughout the brazing process.
- Clean, prepare, and assemble copper pipes and fittings prior to brazing.
- Follow strict safety procedures, including proper handling of compressed gases and maintaining a safe, organized workspace.
- Operate and monitor brazing furnaces and other related equipment as needed to support production.
- Assist with basic equipment maintenance and promote good housekeeping practices in your work area.
- Apply fluxing techniques to chemically remove oxides, provide a protective barrier against atmospheric gases, and facilitate the flow and wetting of filler metals.
- Monitor joint temperature visually during brazing.
- Utilize induction heating as an alternative method when appropriate.
- Follow documented brazing procedures/work instructions, complete travelers, and record in-process/finish inspection results.
- Maintain cleanliness of tubing/lines (cap/plug open lines as required) and prevent contamination/foreign material during assembly.
- Set up and perform dry nitrogen purge during brazing when required to minimize internal oxidation/scale and maintain internal cleanliness.
- Select and use appropriate filler metals, fluxes, and joint configurations based on drawings/specifications and approved processes.
- Support pressure/leak testing per specification; troubleshoot leaks/defects, perform approved rework, and verify repair effectiveness.
- Troubleshoot brazing defects (e.g., porosity, lack of fill, overheating, pinholes) and support root-cause/corrective action with Quality/Engineering.
- Use approved temperature indicators and measurement tools (e.g., temperature crayons/IR thermometer/fixtures) when required to ensure repeatable joints.
- Comply with site hot-work controls (e.g., hot-work permits, ventilation, and fire-watch requirements) as applicable.
Essential Skills & Knowledge:
- Brazing Techniques: Solid understanding of copper brazing processes and applications (3 years minimum).
- Torch Handling: Proficiency in using oxy-fuel and other torches with precision (3 years minimum).
- Blueprint Reading: Ability to interpret technical drawings and specifications.
- Metallurgy: Knowledge of metal properties to ensure proper bonding and joint integrity.
- Fluxing Knowledge: Understanding of flux behavior and its role in joint preparation and filler metal flow.
- Induction Heating: Familiarity with induction brazing equipment and its safe operation.
- Safety Awareness: Strong commitment to safety procedures and proper use of equipment.
- Attention to Detail: Meticulous work habits to ensure high-quality, leak-proof joints.
- Manual Dexterity: Fine motor skills for handling small parts and performing intricate tasks.
- Qualification/Certification: Must be able to qualify and maintain brazer qualification to ISO 13585:2012 (or equivalent) per company procedure, as required for the product/process.
- Process Discipline & Documentation: Ability to follow controlled procedures/work instructions and accurately complete travelers, inspection records, and traceability requirements.
- Cleanliness & Purge Practices: Understanding of internal cleanliness requirements and nitrogen purging practices for copper piping assemblies when specified.
- Leak Test & Rework Skills: Experience supporting pressure/leak testing, diagnosing failures, and executing approved repair/rework processes.
- Filler Metal/Flux Selection: Working knowledge of common copper brazing filler metals/fluxes and the impact of joint fit-up, heat input, and position on joint quality.
- Positional/Tight-Access Brazing: Ability to braze in multiple positions and within constrained assemblies while maintaining joint quality.
Preferred Certifications:
- AWS B2.2 (or equivalent) for brazing qualification.
- ISO 13585:2012 (or equivalent) brazing qualification.
- EPA Section 608 (preferred if the role interfaces with refrigerant circuits; or ability to obtain as required).
Preferred Experience:
- Experience in HVAC/R, industrial refrigeration, heat exchanger, or chiller manufacturing environments.
- Experience working in a regulated production environment requiring documentation, traceability, and defined acceptance criteria.
temporary
Copper Brazing Specialist (SALT LAKE CITY)
🏢 JABIL CIRCUIT, INC
$45,200 - 81,400
Position Summary:
We are seeking a skilled and safety-conscious Copper Brazing Technician to join our manufacturing team. This role is responsible for performing precision brazing of copper components, interpreting blueprints, operating torches (Oxygen/Acetylene), and ensuring high-quality standards in product assembly. The technician will follow controlled brazing procedures/work instructions, maintain required documentation/traceability, and support leak/pressure testing and rework verification as part of production builds.
Key Responsibilities:
- Join copper components by heating them and applying filler metal to create strong, leak-proof bonds.
- Interpret blueprints and written instructions to ensure accurate assembly and placement of copper parts.
- Operate single- and dual-tip torches safely and effectively, maintaining precise heat control throughout the brazing process.
- Clean, prepare, and assemble copper pipes and fittings prior to brazing.
- Follow strict safety procedures, including proper handling of compressed gases and maintaining a safe, organized workspace.
- Operate and monitor brazing furnaces and other related equipment as needed to support production.
- Assist with basic equipment maintenance and promote good housekeeping practices in your work area.
- Apply fluxing techniques to chemically remove oxides, provide a protective barrier against atmospheric gases, and facilitate the flow and wetting of filler metals.
- Monitor joint temperature visually during brazing.
- Utilize induction heating as an alternative method when appropriate.
- Follow documented brazing procedures/work instructions, complete travelers, and record in-process/finish inspection results.
- Maintain cleanliness of tubing/lines (cap/plug open lines as required) and prevent contamination/foreign material during assembly.
- Set up and perform dry nitrogen purge during brazing when required to minimize internal oxidation/scale and maintain internal cleanliness.
- Select and use appropriate filler metals, fluxes, and joint configurations based on drawings/specifications and approved processes.
- Support pressure/leak testing per specification; troubleshoot leaks/defects, perform approved rework, and verify repair effectiveness.
- Troubleshoot brazing defects (e.g., porosity, lack of fill, overheating, pinholes) and support root-cause/corrective action with Quality/Engineering.
- Use approved temperature indicators and measurement tools (e.g., temperature crayons/IR thermometer/fixtures) when required to ensure repeatable joints.
- Comply with site hot-work controls (e.g., hot-work permits, ventilation, and fire-watch requirements) as applicable.
Essential Skills & Knowledge:
- Brazing Techniques: Solid understanding of copper brazing processes and applications (3 years minimum).
- Torch Handling: Proficiency in using oxy-fuel and other torches with precision (3 years minimum).
- Blueprint Reading: Ability to interpret technical drawings and specifications.
- Metallurgy: Knowledge of metal properties to ensure proper bonding and joint integrity.
- Fluxing Knowledge: Understanding of flux behavior and its role in joint preparation and filler metal flow.
- Induction Heating: Familiarity with induction brazing equipment and its safe operation.
- Safety Awareness: Strong commitment to safety procedures and proper use of equipment.
- Attention to Detail: Meticulous work habits to ensure high-quality, leak-proof joints.
- Manual Dexterity: Fine motor skills for handling small parts and performing intricate tasks.
- Qualification/Certification: Must be able to qualify and maintain brazer qualification to ISO 13585:2012 (or equivalent) per company procedure, as required for the product/process.
- Process Discipline & Documentation: Ability to follow controlled procedures/work instructions and accurately complete travelers, inspection records, and traceability requirements.
- Cleanliness & Purge Practices: Understanding of internal cleanliness requirements and nitrogen purging practices for copper piping assemblies when specified.
- Leak Test & Rework Skills: Experience supporting pressure/leak testing, diagnosing failures, and executing approved repair/rework processes.
- Filler Metal/Flux Selection: Working knowledge of common copper brazing filler metals/fluxes and the impact of joint fit-up, heat input, and position on joint quality.
- Positional/Tight-Access Brazing: Ability to braze in multiple positions and within constrained assemblies while maintaining joint quality.
Preferred Certifications:
- AWS B2.2 (or equivalent) for brazing qualification.
- ISO 13585:2012 (or equivalent) brazing qualification.
- EPA Section 608 (preferred if the role interfaces with refrigerant circuits; or ability to obtain as required).
Preferred Experience:
- Experience in HVAC/R, industrial refrigeration, heat exchanger, or chiller manufacturing environments.
- Experience working in a regulated production environment requiring documentation, traceability, and defined acceptance criteria.
temporary
Precision Copper Brazer (SALT LAKE CITY)
🏢 JABIL CIRCUIT, INC
$45,200 - 81,400
Position Summary:
We are seeking a skilled and safety-conscious Copper Brazing Technician to join our manufacturing team. This role is responsible for performing precision brazing of copper components, interpreting blueprints, operating torches (Oxygen/Acetylene), and ensuring high-quality standards in product assembly. The technician will follow controlled brazing procedures/work instructions, maintain required documentation/traceability, and support leak/pressure testing and rework verification as part of production builds.
Key Responsibilities:
- Join copper components by heating them and applying filler metal to create strong, leak-proof bonds.
- Interpret blueprints and written instructions to ensure accurate assembly and placement of copper parts.
- Operate single- and dual-tip torches safely and effectively, maintaining precise heat control throughout the brazing process.
- Clean, prepare, and assemble copper pipes and fittings prior to brazing.
- Follow strict safety procedures, including proper handling of compressed gases and maintaining a safe, organized workspace.
- Operate and monitor brazing furnaces and other related equipment as needed to support production.
- Assist with basic equipment maintenance and promote good housekeeping practices in your work area.
- Apply fluxing techniques to chemically remove oxides, provide a protective barrier against atmospheric gases, and facilitate the flow and wetting of filler metals.
- Monitor joint temperature visually during brazing.
- Utilize induction heating as an alternative method when appropriate.
- Follow documented brazing procedures/work instructions, complete travelers, and record in-process/finish inspection results.
- Maintain cleanliness of tubing/lines (cap/plug open lines as required) and prevent contamination/foreign material during assembly.
- Set up and perform dry nitrogen purge during brazing when required to minimize internal oxidation/scale and maintain internal cleanliness.
- Select and use appropriate filler metals, fluxes, and joint configurations based on drawings/specifications and approved processes.
- Support pressure/leak testing per specification; troubleshoot leaks/defects, perform approved rework, and verify repair effectiveness.
- Troubleshoot brazing defects (e.g., porosity, lack of fill, overheating, pinholes) and support root-cause/corrective action with Quality/Engineering.
- Use approved temperature indicators and measurement tools (e.g., temperature crayons/IR thermometer/fixtures) when required to ensure repeatable joints.
- Comply with site hot-work controls (e.g., hot-work permits, ventilation, and fire-watch requirements) as applicable.
Essential Skills & Knowledge:
- Brazing Techniques: Solid understanding of copper brazing processes and applications (3 years minimum).
- Torch Handling: Proficiency in using oxy-fuel and other torches with precision (3 years minimum).
- Blueprint Reading: Ability to interpret technical drawings and specifications.
- Metallurgy: Knowledge of metal properties to ensure proper bonding and joint integrity.
- Fluxing Knowledge: Understanding of flux behavior and its role in joint preparation and filler metal flow.
- Induction Heating: Familiarity with induction brazing equipment and its safe operation.
- Safety Awareness: Strong commitment to safety procedures and proper use of equipment.
- Attention to Detail: Meticulous work habits to ensure high-quality, leak-proof joints.
- Manual Dexterity: Fine motor skills for handling small parts and performing intricate tasks.
- Qualification/Certification: Must be able to qualify and maintain brazer qualification to ISO 13585:2012 (or equivalent) per company procedure, as required for the product/process.
- Process Discipline & Documentation: Ability to follow controlled procedures/work instructions and accurately complete travelers, inspection records, and traceability requirements.
- Cleanliness & Purge Practices: Understanding of internal cleanliness requirements and nitrogen purging practices for copper piping assemblies when specified.
- Leak Test & Rework Skills: Experience supporting pressure/leak testing, diagnosing failures, and executing approved repair/rework processes.
- Filler Metal/Flux Selection: Working knowledge of common copper brazing filler metals/fluxes and the impact of joint fit-up, heat input, and position on joint quality.
- Positional/Tight-Access Brazing: Ability to braze in multiple positions and within constrained assemblies while maintaining joint quality.
Preferred Certifications:
- AWS B2.2 (or equivalent) for brazing qualification.
- ISO 13585:2012 (or equivalent) brazing qualification.
- EPA Section 608 (preferred if the role interfaces with refrigerant circuits; or ability to obtain as required).
Preferred Experience:
- Experience in HVAC/R, industrial refrigeration, heat exchanger, or chiller manufacturing environments.
- Experience working in a regulated production environment requiring documentation, traceability, and defined acceptance criteria.
temporary
A
Account Executive
🏢 August
Salary not disclosed
At August, we’re building AI designed for one thing: helping law firms practice better. Unlike tools built for the AmLaw 100, our focus is on midsized firms — where efficiency, client service, and competitive advantage matter most.
Our platform helps lawyers draft, review, and analyze documents at scale, turning what used to take hours into minutes. We’re trusted by forward-thinking firms across the U.S., Australia, and Asia, and backed by leading investors (NEA, Pear VC, Stanford Law) to grow globally.
We move quickly, learn directly from clients, and believe that AI is transforming the practice of law.
We’re looking for a Founding Account Executive who is excited to own our sales motion from the ground up. You’ll work directly with the founders, engage some of the most forward-looking law firms, and help shape how AI is adopted across the legal industry.
You’ll need to be comfortable leading complex sales cycles, deeply understanding customer workflows, and translating technical capabilities into business value. This role is ideal for someone who thrives in a fast-moving environment, loves building new markets, and is energized by high ownership.
- Own the full sales cycle: Prospect, qualify, pitch, negotiate, and close new customers.
- Drive revenue growth: Meet and exceed sales targets across mid-market and enterprise law firms.
- Be the face of August: Represent us at industry events, conferences, and key client meetings.
- Partner with Product: Gather feedback from prospects and customers to inform our product roadmap.
- Refine the Playbook: Build the repeatable sales processes that future AEs will scale.
- Collaborate cross-functionally: Work closely with legal, engineering, and leadership teams to customize solutions and ensure customer success.
About You
- 1+ years of experience in a closing sales role (SaaS, Legal Tech, or B2B Enterprise preferred).
- Track record of consistently exceeding quota and owning complex, multi-threaded sales.
- Strong consultative sales skills — you can dig into a prospect’s problems, not just pitch features.
- Comfort navigating technical conversations and translating value for non-technical buyers.
- Ability to thrive in ambiguity and adapt quickly as we scale.
- Bonus: Experience selling into legal, professional services, or highly regulated industries.
- Founding Impact: Shape not just your role but the company.
- Uncapped Upside: Competitive base + commission, early equity ownership.
- Top-tier Team: Work alongside people who move fast, think clearly, and care deeply.
- Category-Defining Work: Help build the first true AI agents for the legal profession.
- Fast Growth: Scale your career as we scale the company.
- Exceptional Early Traction: >4x revenue growth in the past four months.
- Global Reach: Our clients span 4 continents and use August in multiple languages and jurisdictions
- Frontier of Applied AI: August has access to proprietary data inaccessible to foundation model providers. We build agents to automate all challenging knowledge work.
- Strategic investors: Backed by NEA and exceptional seed investors Pear VC and Afore Capital, August has the capital to execute
Not Specified
U
Surface Warfare Officer
🏢 US Navy
Salary not disclosed
If you're a Surface Warfare Officer (SWO), you have what it takes to lead by example. Maintain and operate the most advanced fleet of ships in the world-along with the crews that support them. Your team of Sailors will look to you for guidance, so you'll need to become an expert on everything from engineering to combat systems to navigation. Communicate your mission and goals with your crew to ensure everything is smooth sailing. If you see yourself commanding a Naval ship as a Captain one day, this is the role that will get you there.
Want to start your journey with the Navy?
Apply Now
Officer None
What to Expect
Surface Warfare Officer
More Information
Responsibilities
Surface Warfare Officers (SWOs) are involved in virtually every aspect of Navy missions. As a SWO, you may be in charge of any number of shipboard operations and activities while at sea, working with or within any of these specialized forces:
Aircraft Carrier Forces: Provide and coordinate air, submarine and surface ship defense for aircraft carriers.
Cruiser-Destroyer Forces: Provide ship attack and defensive measures with a wide array of missile and fire power capabilities, providing anti-air, -submarine and -surface warfare support.
Amphibious Forces: Embark and transport vehicles, equipment and personnel for amphibious assault operations.
Combat-Logistics Forces: Provide combatant ships with fuel, ammunition, food and supplies, and provide repair, maintenance and rescue capabilities through Fleet Support Ships.
Mine Warfare Forces: Detect, identify and neutralize threats from hostile use of maritime mines.
You may also be interested in becoming a Surface Warfare Officer within the prestigious Navy Nuclear community where you will have the opportunity to work on some of the world's most powerful nuclear-powered submarines and aircraft carriers.
Work Environment
As a Surface Warfare Officer, you will work at sea and on shore, in a variety of environments. Sea duty could place you aboard ships within the fleet. Shore duty may involve a tour of duty at the Pentagon, a student assignment at the Naval Postgraduate School in Monterey, CA, or command and management positions at shore bases and stations around the world.
Training & Advancement
Those pursuing an Information Professional Officer position are required to attend Officer Candidate School (OCS) in Newport, RI.
Unless they have already been commissioned through the Naval Academy or ROTC, those pursuing a Surface Warfare Officer position are required to attend Officer Candidate School. Newly commissioned SWOs can expect an advanced training process that includes comprehensive training at sea and ashore.
Newly commissioned Surface Warfare Officers will be assigned to a surface ship, leading a team of Sailors responsible for a component of the ship - anything from electronics to weapons to engineering systems. In this setting, Officers are working toward full Surface Warfare qualification.
After completing these initial sea tours, Surface Warfare Officers may be selected to serve on high-level staffs, commands or strategic projects or they may be selected to work in recruitment. The ultimate goal for many: to one day command their own ship.
Promotion opportunities are regularly available but competitive and based on performance.
Post-Service Opportunities
Specialized training received and work experience gained in the course of service can lead to valuable credentialing and occupational opportunities in related fields in the civilian sector.
Education Opportunities
Wherever you are in your professional career, the Navy can help ease your financial burdens and advance your career with generous financial assistance and continuing education programs. Beyond professional credentials and certifications, Surface Warfare Officers can advance their education by:
Qualifications & Requirements
A degree from a four-year college or university is a minimum educational requirement to become a Commissioned Officer.
There are different ways to become a SWO. If you're a high school student or an undergraduate, you can enter through the Naval Reserve Officers Training Corps (NROTC) or through the U.S. Naval Academy. Those already having a degree attend Officer Candidate School (OCS), a 12-week Navy school in Newport, RI.
All candidates must also be U.S. Citizens.
General qualifications may vary depending upon whether you're currently serving, whether you've served before or whether you've never served before.
Part-Time Opportunities
There are part-time opportunities available as a Surface Warfare Officer.
Serving part-time as a Navy Reserve Sailor, your duties will be carried out during your scheduled drilling and training periods. During monthly drilling, Surface Warfare Officers in the Navy Reserve typically work at a location close to their homes.
For annual training, Surface Warfare Officers may serve anywhere in the world, whether on a ship at sea or at bases and installations on shore.
Take a moment to learn more about the general roles and responsibilities of Navy Reserve Sailors.
Most of what you do in the Navy Reserve is considered training. The basic Navy Reserve commitment involves training a minimum of one weekend a month (referred to as drilling) and two weeks a year (referred to as Annual Training) - or the equivalent of that.
Surface Warfare Officers in the Navy Reserve serve in an Officer role. Before receiving the ongoing professional training that comes with this job, initial training requirements must first be met.
For current or former Navy Officers (NAVET): Prior experience satisfies the initial leadership training requirement - so you will not need to go through Officer Training again.
Officers who previously held a commission in another United States Military Service, National Oceanic and Atmospheric Administration, Public Health Service, or United States Coast Guard are exempt from attending ODS or LDO/CWO Academy.
Compare Navy Careers
See how a career as a Surface Warfare Officer compares to other Navy jobs.
Compare roles, pay and requirements for each job now.
Want to start your journey with the Navy?
Apply Now
Officer None
What to Expect
Surface Warfare Officer
More Information
Responsibilities
Surface Warfare Officers (SWOs) are involved in virtually every aspect of Navy missions. As a SWO, you may be in charge of any number of shipboard operations and activities while at sea, working with or within any of these specialized forces:
Aircraft Carrier Forces: Provide and coordinate air, submarine and surface ship defense for aircraft carriers.
Cruiser-Destroyer Forces: Provide ship attack and defensive measures with a wide array of missile and fire power capabilities, providing anti-air, -submarine and -surface warfare support.
Amphibious Forces: Embark and transport vehicles, equipment and personnel for amphibious assault operations.
Combat-Logistics Forces: Provide combatant ships with fuel, ammunition, food and supplies, and provide repair, maintenance and rescue capabilities through Fleet Support Ships.
Mine Warfare Forces: Detect, identify and neutralize threats from hostile use of maritime mines.
You may also be interested in becoming a Surface Warfare Officer within the prestigious Navy Nuclear community where you will have the opportunity to work on some of the world's most powerful nuclear-powered submarines and aircraft carriers.
Work Environment
As a Surface Warfare Officer, you will work at sea and on shore, in a variety of environments. Sea duty could place you aboard ships within the fleet. Shore duty may involve a tour of duty at the Pentagon, a student assignment at the Naval Postgraduate School in Monterey, CA, or command and management positions at shore bases and stations around the world.
Training & Advancement
Those pursuing an Information Professional Officer position are required to attend Officer Candidate School (OCS) in Newport, RI.
Unless they have already been commissioned through the Naval Academy or ROTC, those pursuing a Surface Warfare Officer position are required to attend Officer Candidate School. Newly commissioned SWOs can expect an advanced training process that includes comprehensive training at sea and ashore.
Newly commissioned Surface Warfare Officers will be assigned to a surface ship, leading a team of Sailors responsible for a component of the ship - anything from electronics to weapons to engineering systems. In this setting, Officers are working toward full Surface Warfare qualification.
After completing these initial sea tours, Surface Warfare Officers may be selected to serve on high-level staffs, commands or strategic projects or they may be selected to work in recruitment. The ultimate goal for many: to one day command their own ship.
Promotion opportunities are regularly available but competitive and based on performance.
Post-Service Opportunities
Specialized training received and work experience gained in the course of service can lead to valuable credentialing and occupational opportunities in related fields in the civilian sector.
Education Opportunities
Wherever you are in your professional career, the Navy can help ease your financial burdens and advance your career with generous financial assistance and continuing education programs. Beyond professional credentials and certifications, Surface Warfare Officers can advance their education by:
- Pursuing opportunities at institutions such as Naval Postgraduate School (NPS) or Navy War College (NWC)
- Completing Joint Professional Military Education (JPME) at one of the various service colleges
Qualifications & Requirements
A degree from a four-year college or university is a minimum educational requirement to become a Commissioned Officer.
There are different ways to become a SWO. If you're a high school student or an undergraduate, you can enter through the Naval Reserve Officers Training Corps (NROTC) or through the U.S. Naval Academy. Those already having a degree attend Officer Candidate School (OCS), a 12-week Navy school in Newport, RI.
All candidates must also be U.S. Citizens.
General qualifications may vary depending upon whether you're currently serving, whether you've served before or whether you've never served before.
Part-Time Opportunities
There are part-time opportunities available as a Surface Warfare Officer.
Serving part-time as a Navy Reserve Sailor, your duties will be carried out during your scheduled drilling and training periods. During monthly drilling, Surface Warfare Officers in the Navy Reserve typically work at a location close to their homes.
For annual training, Surface Warfare Officers may serve anywhere in the world, whether on a ship at sea or at bases and installations on shore.
Take a moment to learn more about the general roles and responsibilities of Navy Reserve Sailors.
Most of what you do in the Navy Reserve is considered training. The basic Navy Reserve commitment involves training a minimum of one weekend a month (referred to as drilling) and two weeks a year (referred to as Annual Training) - or the equivalent of that.
Surface Warfare Officers in the Navy Reserve serve in an Officer role. Before receiving the ongoing professional training that comes with this job, initial training requirements must first be met.
For current or former Navy Officers (NAVET): Prior experience satisfies the initial leadership training requirement - so you will not need to go through Officer Training again.
Officers who previously held a commission in another United States Military Service, National Oceanic and Atmospheric Administration, Public Health Service, or United States Coast Guard are exempt from attending ODS or LDO/CWO Academy.
Compare Navy Careers
See how a career as a Surface Warfare Officer compares to other Navy jobs.
Compare roles, pay and requirements for each job now.
Not Specified
B
Structural Engineer
Salary not disclosed
Structural Engineer_Salt Lake City, UT_Full-Time (FTE)_Direct Hire
Position: Structural Engineer
Job Type: Full-Time (FTE)
Location: Salt Lake City, UT
Base Salary: $100,000 to $150,000+Best-in-class benefits
Industry: Construction & Trades
Job Category: Engineering
Job Description:
Structural Engineer
Benefits - Full
Relocation Assistance Available - Possible for ideal candidate
Minimum Education - Bachelor's Degree
Willingness to Travel - Occasionally
Not Specified
T
Enterprise Application Architect (.NET, Azure)
🏢 Trustech
Salary not disclosed
The Enterprise Application Architect is responsible for defining and driving the product’s technical vision using Azure cloud-based solutions and event-driven architectures. This role requires a big-picture mindset, leveraging architectural best practices in software design and implementation to guide teams toward successful productization.
The ideal candidate has strong experience designing and building scalable cloud solutions grounded in Domain-Driven Design (DDD) principles and Microservices architecture within a highly collaborative Agile environment. Deep expertise in the .NET technology stack is essential, as you will work closely with engineering leads to ensure accurate and high-quality implementation.
The Enterprise Application Architect is expected to continuously expand their knowledge of emerging Azure capabilities and proactively integrate relevant services into the platform. Strong communication skills are critical, with the ability to clearly articulate technical concepts and architectural decisions to both technical teams and leadership.
Responsibilities
- Design and develop highly scalable, cloud-native applications on the Azure platform, leveraging modern paradigms such as microservices, serverless computing, and containerization using core services including Azure Functions, AKS, Azure Service Bus, Stream Analytics, Azure IoT, and Azure SQL.
- Provide technical leadership to feature teams during design, support developers throughout implementation, and guide DevOps teams during deployment.
- Define and evolve cloud application architecture; assess technical feasibility; conduct product design reviews with engineering leads and team members.
- Develop deep domain expertise and identify, analyze, and resolve architectural weaknesses, including scalability bottlenecks, domain modeling issues, and application-level conflicts.
- Stay current with industry trends and emerging technologies, applying optimal design patterns to ensure highly available, resilient, and scalable solutions.
Requirements
- Bachelor’s degree in a technical field or 10+ years of equivalent professional or military experience preferred.
- Master’s degree in Computer Science, Engineering, or a related field preferred.
- Minimum seven (7) years of hands-on experience architecting, designing, and developing enterprise-scale, cloud-based software solutions within an Agile environment.
- Strong proficiency in designing and building applications using ASP.NET Core and modern cloud paradigms, including containers and serverless technologies.
- Minimum five (5) years of C#/.NET development experience with deep expertise in ASP.NET Core.
- Proven experience architecting highly available, horizontally scalable systems.
- Hands-on experience designing and managing release processes, code merging and promotion strategies, CI/CD pipelines, and configuration management.
Technical Expertise
- Domain-Driven Design (DDD), Event-Driven Architecture, distributed systems
- Microservices and Micro-frontend architectures
- ASP.NET Core, RESTful APIs, API Management
- Azure Functions, Logic Apps, Azure Integration Accounts, Azure Stream Analytics
- Container platforms and Azure Kubernetes Service (AKS)
- Identity and Access Management (Azure AD, Azure AD B2C, OAuth2)
- Azure SQL and NoSQL solutions, including Azure Table Storage
- Azure IoT, ARM templates, DevOps pipelines, CLI scripting (preferred)
- Cloud monitoring tools such as Azure Log Analytics, Azure Monitor, and Application Insights
- Enterprise Architect modeling (preferred)
- Experience with D365 CRM, React, and Progressive Web Applications (preferred)
Not Specified
W
Ecommerce Operations Lead
Salary not disclosed
About ZB Designs & Wigglitz:
ZB Designs is scaling fast and building elite teams to run each part of our business with precision. Wigglitz is one of our flagship brands, growing quickly with real demand and strong momentum.
We don’t hire for “help.”
We hire operators who take ownership, execute fast, and raise the standard.
About the Role:
We are hiring an E-Commerce Operations Lead to own the execution layer of our Shopify business. This role is responsible for the systems, structure, and operational discipline that turns demand into measurable revenue.
This is not a creative role.
This is not a general marketing role.
This is an ownership role focused on execution, infrastructure, and performance.
You will work closely with our internal leadership team, including our newly hired VP of Sales, to ensure ecommerce becomes a clean, scalable growth engine.
Responsibilities:
Shopify & Site Operations
- Own Shopify backend operations end-to-end
- Maintain site architecture, app stack, checkout logic, and merchandising structure
- Ensure site performance is stable, fast, and conversion-ready
Product, Catalog, and SKU Execution
- Manage product setup, collections, bundles, variants, and launches
- Maintain clean SKU organization and merchandising logic
- Own product lifecycle execution from launch through scale
Inventory + Demand Coordination
- Monitor sell-through and inventory pacing
- Flag risks early and align availability with demand
- Support forecasting and launch quantity planning
Launch Readiness and Execution
- Own launch calendars, checklists, and go-live coordination
- Partner with creative, ops, and agency teams to ensure clean execution
- Run post-launch performance reviews and improvement cycles
Analytics and Revenue Reporting
- Track conversion rate, AOV, product performance, and funnel metrics
- Maintain dashboards and reporting accuracy
- Execute testing and optimization initiatives
Operational Excellence
- Build SOPs, workflows, and repeatable systems
- Reduce chaos and ensure nothing breaks as we scale
- Be the owner of ecommerce execution discipline
What Success Looks Like
In the first 30–60 days, success means:
- Shopify operations are organized, stable, and scalable
- Launch execution becomes repeatable and clean
- Inventory and merchandising decisions improve revenue outcomes
- Leadership has clear visibility into ecommerce performance
- Conversion and operational efficiency begin moving upward quickly
Qualifications
Required Skills
- Extremely organized, systems-minded, and execution-focused
- Strong comfort with data, dashboards, and revenue math
- Ability to move fast without creating chaos
- Ownership mentality: you don’t wait to be told
Preferred Skills
- Shopify / Shopify Plus
- GA4, Tag Manager, attribution tools
- Inventory and merchandising systems
- Ecommerce analytics and reporting
Not Specified
P
Plant Manager
Salary not disclosed
Job description:
Plant Manager | Polymer Extrusion Facility
We are seeking a technically savvy Plant Manager to lead our polymer extrusion operations. If you’re the kind of leader who knows that a plant runs on both high-performance machinery and high-performing people, we want to talk to you.
As the Plant Manager, you won't just be overseeing a floor; you’ll be the architect of our production efficiency, the guardian of our safety culture, and the driver of continuous improvement.
The Role: What You’ll Do
- Drive Production Excellence: Manage the daily operations of multiple extrusion lines to meet (and exceed) production targets while maintaining strict quality standards.
- Optimize Technical Processes: Oversee material blending, die setups, and cooling parameters. You should be comfortable "talking shop" regarding polymer rheology and mechanical troubleshooting.
- Lead & Mentor: Foster a culture of accountability and professional growth across production supervisors, maintenance tech, and operators.
- Budget & P&L Ownership: Manage the plant’s bottom line, including labor costs, raw material waste (scrap reduction), and CAPEX projects.
- Safety First: Ensure 100% compliance with OSHA standards and internal safety protocols. No product is worth a person’s well-being.
- Continuous Improvement: Implement Lean Manufacturing or Six Sigma methodologies to reduce downtime and optimize changeover speeds.
What You Bring to the Table
- Experience: 7+ years in a manufacturing leadership role, specifically within polymer extrusion (profile, sheet, film, or tubing).
- Technical Knowledge: A deep understanding of single/twin-screw extruders, downstream equipment, and resin behavior (PE, PP, PVC, etc.).
- Problem-Solving Skills: You don't just see a bottleneck; you find the root cause and fix it permanently.
- Education: Bachelor’s degree in Engineering (Mechanical, Chemical, or Plastics) or a related technical field is preferred.
- Communication: The ability to explain complex technical issues to stakeholders and motivate a diverse workforce on the floor.
Not Specified
C
Senior Quality Assurance Validation Specialist
Salary not disclosed
Canyon Labs exists to raise the standard of services in the Medical Device and Pharmaceutical markets by providing streamlined and expert solutions in technical consulting, sterilization, analytical testing and packaging.
We are committed to ensuring that quality services are delivered by meeting or exceeding customer expectations, continuously improving the effectiveness of the quality system, and ensuring compliance with regulations, standards and directives.
Position Title: Senior Quality Assurance Validation Specialist
Location: Onsite at Canyon Labs in Bluffdale, Utah
Schedule: Monday – Friday 8:00AM – 5:00PM
Annual Salary Range: $70,000 - $80,000
Senior Quality Validation Specialist Job Summary:
The Senior Specialist plays a key leadership role in ensuring the organization’s GLP, GMP/QMSR, and ISO 17025 operations remain compliant, audit-ready, and aligned with regulatory, customer, and notified body expectations. This role supports the organization by coordinating audits, managing quality events, supporting computerized systems validation/change management and ensuring documentation and processes meet both regulatory and internal standards. The Senior Specialist performs detailed documentation reviews, hosts customer, supplier, and regulatory inspections, and leads or supports investigations, deviations, audit responses and corrective actions. In addition, this role oversees change control activities, contributes to QMS administration, and delivers compliance training across departments. Working closely with Lab Operations, the Senior Specialist helps identify compliance risks, strengthen quality practices, and maintain a consistent state of audit readiness across the site.
Senior Quality Validation Specialist Job Duties:
· Coordinate and host customer, supplier, and regulatory audits, including scheduling, document preparation, SME coordination, conducting/hosting the audit and on-site support.
· Support computerized systems validations and change management by developing user and functional requirements specifications, developing validation plans in alignment with 21CFR Part 11 and GAMP 5, writing/reviewing/approving/executing qualification protocols, reports and risk assessments, participating in periodic reviews and change management.
· Maintain audit readiness by ensuring documentation, records, and training requirements are current and compliant with GLP, GMP/QMSR, and ISO 17025 expectations.
· Manage and participate in quality events, including deviations, CAPAOOT results, equipment failures, data integrity issues, audit responses, and customer complaints.
· Lead or support investigations by gathering information, reviewing documentation, conducting interviews, and assisting in root cause analysis and corrective action development.
· Perform detailed documentation reviews, including study data, reports, logs, forms, and controlled records, to ensure completeness, accuracy, and adherence to internal procedures.
· Help support change control activities for SOPs, forms, equipment, computerized systems and process updates, ensuring appropriate review, approval, and implementation.
· Support QMS administration, including document control, training records, deviation and CAPA tracking, and compliance reporting.
· Conduct internal audits as part of the audit schedule.
· Deliver compliance-related training for GLP, GMP/QMSR, ISO 17025, GDP, internal procedures, and audit readiness.
· Identify and escalate compliance risks using trends, audit outcomes, and quality event patterns to drive proactive corrective and preventive actions.
· Support Lab Operations in strengthening compliance while driving continuous improvement, standardizing documentation, collaborating across teams, and contributing to a strong QMS that ensures compliance and operational excellence.
Senior Quality Validation Specialist Requirements:
· Bachelor’s degree in a scientific or technical discipline (e.g., Chemistry, Biology, Microbiology, Engineering, or related field), or equivalent experience. · Minimum of 6 years of experience in Quality Assurance, computerized systems validation, or related roles within a GLP, GMP/QMSR, ISO 17025, or similarly regulated environment.
Senior Quality Validation Specialist Knowledge, Skills and Abilities:
· Strong understanding of GLP (21 CFR Part 58), GMP/QMSR (21 CFR Parts 210/211/820), and ISO/IEC 17025 principles.
· Experience coordinating and hosting customer, supplier, and/or regulatory audits.
· Demonstrated experience supporting or writing investigations, deviations, nonconformances, and corrective actions.
· Strong working knowledge of Quality Management System (QMS) processes, including change control, document control, and training management.
· Excellent written and verbal communication skills, including the ability to draft clear, accurate, and compliant documentation.
· Strong organizational skills and high attention to detail, with the ability to manage multiple priorities and deadlines.
· Ability to work independently and collaboratively with laboratory operations, and quality teams.
· Proficiency with Microsoft Office applications and comfort working with electronic QMS or LIMS platforms.
Canyon Labs offers several benefits as part of your total compensation, including but not limited to:
• Paid Time Off, Sick Time, and Paid Holidays
• Medical, Dental and Vision Insurance
• Long term disability insurance, life insurance
• 401(k) with company match up to 4%
At Canyon Labs, we are committed to creating a diverse and inclusive workplace. We provide equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, veteran status, or any other protected characteristic under applicable laws.
Not Specified
Principal Mechanical Integration Engineer - DCI Pipes, Frames and Structures (REMOTE)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title : Principal Mechanical Design Engineer
Job Family : Mechanical Design Engineering
Organization : Data Center Infrastructure Team
Location : Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
* Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
* Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
* Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
* Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
* Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
* Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
* Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
* Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
* Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
* Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
* Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
* Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
* Lead mechanical design reviews and contribute to cross-functional design validation efforts.
* Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
* Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
* Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
* Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
* Conduct root cause analysis and corrective actions for mechanical failures or field issues.
* Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
* Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
* May perform other duties and responsibilities as assigned
How will you get here?
Education :
* Bachelor's Degree in Mechanical Engineering or related engineering discipline.
Experience :
* 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
* Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
* Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
* Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
* Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
* Excellent interpersonal and communication skills
* Creative, self-motivated, accountable, and team-oriented
* Able to work independently with minimal oversight
* Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
* Skilled in writing reports, business correspondence, and procedural guides
* Effective at presenting information and responding to management, clients, and public queries
* Capable of influencing others and sharing best practices
* Comfortable working as part of a global team
* Capable of assessing projects, articulating risks, and developing project milestones
* Familiar with stage-gate processes in project lifecycle management (PLCM)
* Able to mentor less experienced engineers
* Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
* Master's Degree in Mechanical Engineering
* Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
* Active Professional Engineer (PE) license.
* Knowledge of regulatory and safety standards applicable to data center infrastructure.
* Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family : Mechanical Design Engineering
Organization : Data Center Infrastructure Team
Location : Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
* Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
* Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
* Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
* Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
* Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
* Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
* Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
* Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
* Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
* Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
* Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
* Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
* Lead mechanical design reviews and contribute to cross-functional design validation efforts.
* Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
* Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
* Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
* Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
* Conduct root cause analysis and corrective actions for mechanical failures or field issues.
* Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
* Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
* May perform other duties and responsibilities as assigned
How will you get here?
Education :
* Bachelor's Degree in Mechanical Engineering or related engineering discipline.
Experience :
* 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
* Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
* Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
* Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
* Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
* Excellent interpersonal and communication skills
* Creative, self-motivated, accountable, and team-oriented
* Able to work independently with minimal oversight
* Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
* Skilled in writing reports, business correspondence, and procedural guides
* Effective at presenting information and responding to management, clients, and public queries
* Capable of influencing others and sharing best practices
* Comfortable working as part of a global team
* Capable of assessing projects, articulating risks, and developing project milestones
* Familiar with stage-gate processes in project lifecycle management (PLCM)
* Able to mentor less experienced engineers
* Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
* Master's Degree in Mechanical Engineering
* Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
* Active Professional Engineer (PE) license.
* Knowledge of regulatory and safety standards applicable to data center infrastructure.
* Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
permanent
Lead Mechanical Systems Engineer - Remote Structures and Integration (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Integration Engineer – DCI Pipes, Frames and Structures (REMOTE) - Collaborative Remote Work Environment (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Principal Electrical Controls Engineer - Data Center Infrastructure (REMOTE) (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Electrical Controls Engineer
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
temporary
Senior Manufacturing Test Development Engineer - Remote flexibility with hybrid schedule (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Location/Division Specific Information – Austin, TX/ USA - Remote
**This position supports hybrid work schedule depending on organization needs.**
How will you make an impact? –
Jabil is seeking a Sr. Software Test Development Engineer who will directly contribute to the transformative growth within our Enterprise and Infrastructure division by applying unique and innovative approaches to solving problems within a large-scale software production environment. The Software Test Development Engineer play a vital role in ensuring the quality and reliability of hardware products, contributing to the overall success of the manufacturing process and customer satisfaction. You will be responsible for contributing to the end-to-end architecture, definition, development and production deployment of production software applications and infrastructure spanning multiple customers and manufacturing regions. You will also be responsible for interfacing with internal engineering, manufacturing and quality teams and our end customers to ensure your software deliverables meet the rigorous standards of Jabil’s world-class manufacturing environments.
What will you do? –
- Test System Development: Design and develop test systems and procedures for manufacturing processes. This includes creating test plans, test cases, and test scripts to assess the functionality and performance of hardware components or devices such as motherboard, memory, CPU, storage (SSD, HDD, NVMe) and PCIE devices (NIC, GPU, Mezz cards, RAID cards)
- Test Software Development: Create, validate, release, and maintain test software and scripts that automate the testing process. This software may include code for controlling test equipment, collecting and analyzing data, and generating test reports
- Test Sustaining: Support and maintenance for the manufacturing server (L10) and rack (L11) level test software and infrastructure deployed at our production facilities, including the implementation of minor system configuration changes (new IPNs)
- Documentation: Maintain comprehensive manufacturing server (L10) and rack (L11) documentation of test procedures, specifications, and Infrastructure
- Collaboration: Work closely with cross-functional teams, including hardware engineers, manufacturing engineers, and quality assurance personnel, to ensure alignment on testing requirements and quality standards
- Continuous Learning: Stay updated on the latest advancements in testing technologies, methodologies, and industry best practices to keep manufacturing processes competitive and up to date
- Definition and collaboration on overall test infrastructure and application architectures
How will you get here? -
Education:
- BS degree in Electrical/Computer Engineering, Computer Science or related field is required
Experience:
- 5-8 years’ experience in a software manufacturing test development/sustaining with enterprise server, storage or networking products is required
- 10+ years of relevant experience in a software manufacturing test development/ sustaining with enterprise server, storage or networking products and some college coursework in lieu of a 4- yr. degree, will be considered
- Excellent verbal and written communication skills is required
Knowledge, Skills, Abilities:
- Expertise in the following programming/scripting languages: Python, Java, BASH. C, C++, experience a plus
- Linux development expertise with a solid understanding of its fundamentals: CentOS/Ubuntu
- Expertise with hardware and API solutions for controlling, managing and stressing L10 devices (servers, network and storage SSDs, NVMe): IPMI, Redfish, mprime, FIO, Linpack, ptugen, memtester
- Expertise in the creation and configuration (DHCP, PXE boot, nginx) of Virtual Machines (VMs) using VMWare
- Expertise with leading edge networking systems, hardware, software and protocols including but not limited to enterprise ethernet datacenter switching/routing L1, L2, and L3 (BGP, DHCP Relay, ECMP). Arista CloudVision is a plus
- Experience with code versioning tools (Git preferred)
- Strong knowledge of professional software engineering practices for the complete software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations
- Ability to travel up to 10% globally as required
Preferred Qualifications:
- MS preferred
- Experience working in a multi-site and multi-cultural environments is a plus
Remote working/work at home options are available for this role.
**This position supports hybrid work schedule depending on organization needs.**
How will you make an impact? –
Jabil is seeking a Sr. Software Test Development Engineer who will directly contribute to the transformative growth within our Enterprise and Infrastructure division by applying unique and innovative approaches to solving problems within a large-scale software production environment. The Software Test Development Engineer play a vital role in ensuring the quality and reliability of hardware products, contributing to the overall success of the manufacturing process and customer satisfaction. You will be responsible for contributing to the end-to-end architecture, definition, development and production deployment of production software applications and infrastructure spanning multiple customers and manufacturing regions. You will also be responsible for interfacing with internal engineering, manufacturing and quality teams and our end customers to ensure your software deliverables meet the rigorous standards of Jabil’s world-class manufacturing environments.
What will you do? –
- Test System Development: Design and develop test systems and procedures for manufacturing processes. This includes creating test plans, test cases, and test scripts to assess the functionality and performance of hardware components or devices such as motherboard, memory, CPU, storage (SSD, HDD, NVMe) and PCIE devices (NIC, GPU, Mezz cards, RAID cards)
- Test Software Development: Create, validate, release, and maintain test software and scripts that automate the testing process. This software may include code for controlling test equipment, collecting and analyzing data, and generating test reports
- Test Sustaining: Support and maintenance for the manufacturing server (L10) and rack (L11) level test software and infrastructure deployed at our production facilities, including the implementation of minor system configuration changes (new IPNs)
- Documentation: Maintain comprehensive manufacturing server (L10) and rack (L11) documentation of test procedures, specifications, and Infrastructure
- Collaboration: Work closely with cross-functional teams, including hardware engineers, manufacturing engineers, and quality assurance personnel, to ensure alignment on testing requirements and quality standards
- Continuous Learning: Stay updated on the latest advancements in testing technologies, methodologies, and industry best practices to keep manufacturing processes competitive and up to date
- Definition and collaboration on overall test infrastructure and application architectures
How will you get here? -
Education:
- BS degree in Electrical/Computer Engineering, Computer Science or related field is required
Experience:
- 5-8 years’ experience in a software manufacturing test development/sustaining with enterprise server, storage or networking products is required
- 10+ years of relevant experience in a software manufacturing test development/ sustaining with enterprise server, storage or networking products and some college coursework in lieu of a 4- yr. degree, will be considered
- Excellent verbal and written communication skills is required
Knowledge, Skills, Abilities:
- Expertise in the following programming/scripting languages: Python, Java, BASH. C, C++, experience a plus
- Linux development expertise with a solid understanding of its fundamentals: CentOS/Ubuntu
- Expertise with hardware and API solutions for controlling, managing and stressing L10 devices (servers, network and storage SSDs, NVMe): IPMI, Redfish, mprime, FIO, Linpack, ptugen, memtester
- Expertise in the creation and configuration (DHCP, PXE boot, nginx) of Virtual Machines (VMs) using VMWare
- Expertise with leading edge networking systems, hardware, software and protocols including but not limited to enterprise ethernet datacenter switching/routing L1, L2, and L3 (BGP, DHCP Relay, ECMP). Arista CloudVision is a plus
- Experience with code versioning tools (Git preferred)
- Strong knowledge of professional software engineering practices for the complete software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations
- Ability to travel up to 10% globally as required
Preferred Qualifications:
- MS preferred
- Experience working in a multi-site and multi-cultural environments is a plus
Remote working/work at home options are available for this role.
temporary
Senior Manager, Manufacturing Test Development - Austin or Remote US (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Senior Manager, Manufacturing Test Development - based onsite in Austin, TX or Remote US.
Jabil is seeking a Senior Manager, Manufacturing Test Development for our Austin, TX location who will directly contribute to the transformative growth within our Intelligent Infrastructure division by applying unique and innovative approaches to developing end customer product solutions.
You will be responsible for managing the technical direction of Rack scale test software and integration development programs through the lens of the customer, factory, and services. You will also be responsible for partnering and collaborating with Hyperscale & AI customers, strategic suppliers, internal engineering, product management, program management, manufacturing, test and quality teams to ensure your products meet the rigorous standards and performance expectations of Jabil’s world-class manufacturing environments and our customers.
What can you expect to do?
LEADERSHIP RESPONSIBILITIES
- Responsible for ensuring the delivery of all manufacturing test solutions for new and sustaining programs for rack-scale AI/ML and GPGPU and hardware accelerator-based server and storage platforms.
- Accountable for all onsite customer delivery commissioning tests as an extension of the manufacturing test capability.
- Strong ability to organize teams and drive the solution for multiple, complex problems cross-functionally and within various areas of technical expertise (hardware, software, firmware, performance, interoperability, etc.)
- Charged with ensuring the right level of execution discipline and engineering rigor is applied to all technical program deliverables – must lead by example.
- Empowered to make key decisions with respect to quality and features that may impact customer experience.
- Capable of influencing individuals, teams and executives to the level necessary to support delivery of programs within schedule, scope and budget boundaries.
- Able to understand how technical decisions impact the broader business, factories and customers and use these insights to lead the broader organization to optimized outcomes.
- Must be extremely detailed oriented while at the same time able to communicate complex issues in simple, actionable terms at all levels within the organization.
- Must possess a strong balance of technical skills, experience-based judgment and business acumen in all execution and decision-making activities.
- Strong ability to develop, grow and maintain healthy interpersonal relationships with peers, team members, executive leadership, customers and external partners at all times.
- Provide thought leadership and direct engineering support to multiple manufacturing sites in the areas of product, component and supplier expertise.
- Exchange knowledge and information with other Jabil facilities to ensure best practices are both shared and implemented throughout the Jabil organization.
- Guide technical and operational teams towards the successful resolution of complex and/or systemic product, process and material issues through the application of rigorous analytical methods.
- Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines).
FUNCTIONAL RESPONSIBILITIES
- Primary technical interface for manufacturing rack test development efforts from concept through delivery.
- Own driving resolution of all issues regarding test solutions aligned with critical path.
- Reviewer and approver of technical risks, and contingency/mitigation plans.
- Can review and provide input to material plans, test plans, test reports, lessons learned.
- Owns preventative actions so gaps in E2E process or capability are addressed long-term.
- Accountable for managing manufacturing technical and quality excursions through indirect coordination and hands-on engineering analysis as it pertains to your test deliverables.
- Provide technical and product subject matter expertise to the factories and customers.
- Lead highly technical and innovative RFI/RFQ responses supporting new strategic and recurring business opportunities.
KNOWLEDGE REQUIREMENTS
- Strong technical program management skills. Able to lead and direct a broad cross-functional global team.
- Exceptional knowledge and experience regarding product development processes and tools.
- Experience and deep level of understanding of server, storage, networking and GPGPU and PCIe-based accelerator architectures.
- Working knowledge of OS, driver, firmware and hardware architecture, device interactions and ability to leverage expertise to determine root cause that lead to optimized solutions.
- Deep experience in process development and process improvement. Able to lead the development of complex processes spanning multiple functions and areas of expertise.
What is the experience needed to be successful in this role?
- BS degree in Electrical/Computer Engineering, Computer Science or related field is required; MS is preferred.
- 8+ years' experience in a software or hardware product development environment with enterprise server, storage or networking products is required.
- Excellent verbal and written communication skills.
- Prior experience directly or indirectly managing engineering and/or development teams.
- Experience managing remote, multi-national and geographically dispersed development teams.
- Domestic and/or international travel, up to 30%, may be required.
Benefits Package with Jabil
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Competitive Base Salary
- Annual Bonus
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
Remote working/work at home options are available for this role.
Jabil is seeking a Senior Manager, Manufacturing Test Development for our Austin, TX location who will directly contribute to the transformative growth within our Intelligent Infrastructure division by applying unique and innovative approaches to developing end customer product solutions.
You will be responsible for managing the technical direction of Rack scale test software and integration development programs through the lens of the customer, factory, and services. You will also be responsible for partnering and collaborating with Hyperscale & AI customers, strategic suppliers, internal engineering, product management, program management, manufacturing, test and quality teams to ensure your products meet the rigorous standards and performance expectations of Jabil’s world-class manufacturing environments and our customers.
What can you expect to do?
LEADERSHIP RESPONSIBILITIES
- Responsible for ensuring the delivery of all manufacturing test solutions for new and sustaining programs for rack-scale AI/ML and GPGPU and hardware accelerator-based server and storage platforms.
- Accountable for all onsite customer delivery commissioning tests as an extension of the manufacturing test capability.
- Strong ability to organize teams and drive the solution for multiple, complex problems cross-functionally and within various areas of technical expertise (hardware, software, firmware, performance, interoperability, etc.)
- Charged with ensuring the right level of execution discipline and engineering rigor is applied to all technical program deliverables – must lead by example.
- Empowered to make key decisions with respect to quality and features that may impact customer experience.
- Capable of influencing individuals, teams and executives to the level necessary to support delivery of programs within schedule, scope and budget boundaries.
- Able to understand how technical decisions impact the broader business, factories and customers and use these insights to lead the broader organization to optimized outcomes.
- Must be extremely detailed oriented while at the same time able to communicate complex issues in simple, actionable terms at all levels within the organization.
- Must possess a strong balance of technical skills, experience-based judgment and business acumen in all execution and decision-making activities.
- Strong ability to develop, grow and maintain healthy interpersonal relationships with peers, team members, executive leadership, customers and external partners at all times.
- Provide thought leadership and direct engineering support to multiple manufacturing sites in the areas of product, component and supplier expertise.
- Exchange knowledge and information with other Jabil facilities to ensure best practices are both shared and implemented throughout the Jabil organization.
- Guide technical and operational teams towards the successful resolution of complex and/or systemic product, process and material issues through the application of rigorous analytical methods.
- Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines).
FUNCTIONAL RESPONSIBILITIES
- Primary technical interface for manufacturing rack test development efforts from concept through delivery.
- Own driving resolution of all issues regarding test solutions aligned with critical path.
- Reviewer and approver of technical risks, and contingency/mitigation plans.
- Can review and provide input to material plans, test plans, test reports, lessons learned.
- Owns preventative actions so gaps in E2E process or capability are addressed long-term.
- Accountable for managing manufacturing technical and quality excursions through indirect coordination and hands-on engineering analysis as it pertains to your test deliverables.
- Provide technical and product subject matter expertise to the factories and customers.
- Lead highly technical and innovative RFI/RFQ responses supporting new strategic and recurring business opportunities.
KNOWLEDGE REQUIREMENTS
- Strong technical program management skills. Able to lead and direct a broad cross-functional global team.
- Exceptional knowledge and experience regarding product development processes and tools.
- Experience and deep level of understanding of server, storage, networking and GPGPU and PCIe-based accelerator architectures.
- Working knowledge of OS, driver, firmware and hardware architecture, device interactions and ability to leverage expertise to determine root cause that lead to optimized solutions.
- Deep experience in process development and process improvement. Able to lead the development of complex processes spanning multiple functions and areas of expertise.
What is the experience needed to be successful in this role?
- BS degree in Electrical/Computer Engineering, Computer Science or related field is required; MS is preferred.
- 8+ years' experience in a software or hardware product development environment with enterprise server, storage or networking products is required.
- Excellent verbal and written communication skills.
- Prior experience directly or indirectly managing engineering and/or development teams.
- Experience managing remote, multi-national and geographically dispersed development teams.
- Domestic and/or international travel, up to 30%, may be required.
Benefits Package with Jabil
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Competitive Base Salary
- Annual Bonus
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
Remote working/work at home options are available for this role.
temporary
Sr. Principal Electrical Integration Engineer - Data Center (Remote) (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Sr. Principal Electrical Design Engineer
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
Jabil has an exciting opportunity for a highly experienced and technically proficient Principal Electrical Engineer to engage in the design, fabrication, and integration of electrical systems for data center power and cooling products, as well as factory enablement projects. This role includes full-stack electrical design from generator systems to AI rack integration zones, with a focus on PDUs, UPS systems, MV/HV power distribution, phased power infrastructure, and controls architecture. The ideal candidate will bring deep technical expertise and a passion for delivering scalable, reliable, and compliant infrastructure solutions.
The Sr. Principal Electrical Integration Engineer will manage and oversee the electrical systems essential for the data center, energy storage systems, and HVAC applications. This role will involve developing specifications, selecting key components, routing wires and cables, establishing connections, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
Product & System Design:
- Knowledge of high-efficiency power conversion and point-of-load regulation for AI/ML server racks (BBU, rPDU).
- Understanding of rack power zoning, load balancing, and redundancy strategies for tiered compute workloads.
- Ensure electrical systems are properly integrated into fabricated enclosures and structural assemblies.
- Lead the electrical design and integration of UPS systems, power conversion units, and safety interlocks.
- Develop and maintain single-line and three-line diagrams for power distribution systems, ensuring clarity, accuracy, and compliance with NEC, IEEE, and UL standards.
- Design and validate three-phase power systems, including load balancing, fault protection, and redundancy strategies for high-availability environments.
- Engineer and integrate medium-voltage (MV) and high-voltage (HV) power distribution components such as switchgear, transformers, busways, and protective relays.
- Specify and qualify electrical components including circuit breakers, contactors, CTs/PTs, surge protection devices, isolation switches for MV/HV applications and the design and development of wiring harnesses
Factory & Facility Integration:
- Design end-to-end electrical distribution systems from generator and utility interface to AI rack integration zones.
- Coordinate with cross functional teams to ensure electrical infrastructure aligns with facility layout, safety codes, and operational requirements.
- Plan and implement power redundancy, load segmentation, and scalable distribution architectures to support high-density compute environments.
- Ensure proper grounding, EMI shielding, and thermal management across all facility-level electrical systems.
Fabrication & Implementation:
- Define fabrication processes including panel building, cable routing, and system integration, ensuring manufacturability and serviceability.
- Perform electrical load calculations, short-circuit analysis, arc flash studies, and thermal modeling using tools such as ETAP, SKM PowerTools, or EasyPower.
- Lead design reviews, risk assessments, and validation testing to ensure compliance with UL, IEC, NEC, CE, RoHS, and REACH standards.
- Interface with suppliers and customers resolve fabrication and quality issues, and ensure adherence to specifications.
- Support prototype builds, field deployments, and customer engagements to gather feedback and refine designs.
Controls Architecture:
- Develop and implement electrical controls architecture for power and cooling systems, including PLCs, SCADA integration, and remote monitoring capabilities.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Collaborate with software and automation teams to ensure seamless integration of control systems with facility and product-level infrastructure.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
Leadership & Documentation:
- Develop and maintain engineering documentation including BOMs, test procedures, and engineering change orders (ECOs).
- Mentor junior engineers and provide technical leadership across cross-functional teams.
- Drive continuous improvement initiatives focused on cost reduction, design for manufacturability (DFM), and product scalability
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or related engineering discipline.
Experience:
- 10+ years of experience in electrical design and fabrication, with a focus on data center or industrial power systems
- Proficiency in ECAD tools (AutoCAD Electrical, EPLAN, SolidWorks Electrical) and integration with mechanical CAD platforms
- Strong understanding of MV/HV power distribution, lithium-ion UPS systems, and three-phase electrical infrastructure
- Experience with electrical analysis tools (ETAP, SKM PowerTools, EasyPower)
- Proven experience in facility-level electrical design and construction support and Excellent leadership, communication, and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
Preferred Qualifications:
- Master’s Degree in Electrical Engineering
- Active Professional Engineer (PE) license
- Experience with data center infrastructure: UPS systems, switchgear, CRAC units, and PDUs
- Familiarity with global compliance standards: UL, CE, RoHS, REACH, and IEEE.
- Hands-on experience with panel fabrication, wiring, and system integration
- Knowledge of thermal and mechanical constraints in electrical enclosure design and experience working with global suppliers and contract manufacturers
- Experience in WindChill and DevOps
Remote working/work at home options are available for this role.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
Jabil has an exciting opportunity for a highly experienced and technically proficient Principal Electrical Engineer to engage in the design, fabrication, and integration of electrical systems for data center power and cooling products, as well as factory enablement projects. This role includes full-stack electrical design from generator systems to AI rack integration zones, with a focus on PDUs, UPS systems, MV/HV power distribution, phased power infrastructure, and controls architecture. The ideal candidate will bring deep technical expertise and a passion for delivering scalable, reliable, and compliant infrastructure solutions.
The Sr. Principal Electrical Integration Engineer will manage and oversee the electrical systems essential for the data center, energy storage systems, and HVAC applications. This role will involve developing specifications, selecting key components, routing wires and cables, establishing connections, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
Product & System Design:
- Knowledge of high-efficiency power conversion and point-of-load regulation for AI/ML server racks (BBU, rPDU).
- Understanding of rack power zoning, load balancing, and redundancy strategies for tiered compute workloads.
- Ensure electrical systems are properly integrated into fabricated enclosures and structural assemblies.
- Lead the electrical design and integration of UPS systems, power conversion units, and safety interlocks.
- Develop and maintain single-line and three-line diagrams for power distribution systems, ensuring clarity, accuracy, and compliance with NEC, IEEE, and UL standards.
- Design and validate three-phase power systems, including load balancing, fault protection, and redundancy strategies for high-availability environments.
- Engineer and integrate medium-voltage (MV) and high-voltage (HV) power distribution components such as switchgear, transformers, busways, and protective relays.
- Specify and qualify electrical components including circuit breakers, contactors, CTs/PTs, surge protection devices, isolation switches for MV/HV applications and the design and development of wiring harnesses
Factory & Facility Integration:
- Design end-to-end electrical distribution systems from generator and utility interface to AI rack integration zones.
- Coordinate with cross functional teams to ensure electrical infrastructure aligns with facility layout, safety codes, and operational requirements.
- Plan and implement power redundancy, load segmentation, and scalable distribution architectures to support high-density compute environments.
- Ensure proper grounding, EMI shielding, and thermal management across all facility-level electrical systems.
Fabrication & Implementation:
- Define fabrication processes including panel building, cable routing, and system integration, ensuring manufacturability and serviceability.
- Perform electrical load calculations, short-circuit analysis, arc flash studies, and thermal modeling using tools such as ETAP, SKM PowerTools, or EasyPower.
- Lead design reviews, risk assessments, and validation testing to ensure compliance with UL, IEC, NEC, CE, RoHS, and REACH standards.
- Interface with suppliers and customers resolve fabrication and quality issues, and ensure adherence to specifications.
- Support prototype builds, field deployments, and customer engagements to gather feedback and refine designs.
Controls Architecture:
- Develop and implement electrical controls architecture for power and cooling systems, including PLCs, SCADA integration, and remote monitoring capabilities.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Collaborate with software and automation teams to ensure seamless integration of control systems with facility and product-level infrastructure.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
Leadership & Documentation:
- Develop and maintain engineering documentation including BOMs, test procedures, and engineering change orders (ECOs).
- Mentor junior engineers and provide technical leadership across cross-functional teams.
- Drive continuous improvement initiatives focused on cost reduction, design for manufacturability (DFM), and product scalability
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or related engineering discipline.
Experience:
- 10+ years of experience in electrical design and fabrication, with a focus on data center or industrial power systems
- Proficiency in ECAD tools (AutoCAD Electrical, EPLAN, SolidWorks Electrical) and integration with mechanical CAD platforms
- Strong understanding of MV/HV power distribution, lithium-ion UPS systems, and three-phase electrical infrastructure
- Experience with electrical analysis tools (ETAP, SKM PowerTools, EasyPower)
- Proven experience in facility-level electrical design and construction support and Excellent leadership, communication, and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
Preferred Qualifications:
- Master’s Degree in Electrical Engineering
- Active Professional Engineer (PE) license
- Experience with data center infrastructure: UPS systems, switchgear, CRAC units, and PDUs
- Familiarity with global compliance standards: UL, CE, RoHS, REACH, and IEEE.
- Hands-on experience with panel fabrication, wiring, and system integration
- Knowledge of thermal and mechanical constraints in electrical enclosure design and experience working with global suppliers and contract manufacturers
- Experience in WindChill and DevOps
Remote working/work at home options are available for this role.
temporary
Senior Manager, Manufacturing Test Development - Austin or Remote US (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Senior Manager, Manufacturing Test Development - based onsite in Austin, TX or Remote US.
Jabil is seeking a Senior Manager, Manufacturing Test Development for our Austin, TX location who will directly contribute to the transformative growth within our Intelligent Infrastructure division by applying unique and innovative approaches to developing end customer product solutions.
You will be responsible for managing the technical direction of Rack scale test software and integration development programs through the lens of the customer, factory, and services. You will also be responsible for partnering and collaborating with Hyperscale & AI customers, strategic suppliers, internal engineering, product management, program management, manufacturing, test and quality teams to ensure your products meet the rigorous standards and performance expectations of Jabil’s world-class manufacturing environments and our customers.
What can you expect to do?
LEADERSHIP RESPONSIBILITIES
- Responsible for ensuring the delivery of all manufacturing test solutions for new and sustaining programs for rack-scale AI/ML and GPGPU and hardware accelerator-based server and storage platforms.
- Accountable for all onsite customer delivery commissioning tests as an extension of the manufacturing test capability.
- Strong ability to organize teams and drive the solution for multiple, complex problems cross-functionally and within various areas of technical expertise (hardware, software, firmware, performance, interoperability, etc.)
- Charged with ensuring the right level of execution discipline and engineering rigor is applied to all technical program deliverables – must lead by example.
- Empowered to make key decisions with respect to quality and features that may impact customer experience.
- Capable of influencing individuals, teams and executives to the level necessary to support delivery of programs within schedule, scope and budget boundaries.
- Able to understand how technical decisions impact the broader business, factories and customers and use these insights to lead the broader organization to optimized outcomes.
- Must be extremely detailed oriented while at the same time able to communicate complex issues in simple, actionable terms at all levels within the organization.
- Must possess a strong balance of technical skills, experience-based judgment and business acumen in all execution and decision-making activities.
- Strong ability to develop, grow and maintain healthy interpersonal relationships with peers, team members, executive leadership, customers and external partners at all times.
- Provide thought leadership and direct engineering support to multiple manufacturing sites in the areas of product, component and supplier expertise.
- Exchange knowledge and information with other Jabil facilities to ensure best practices are both shared and implemented throughout the Jabil organization.
- Guide technical and operational teams towards the successful resolution of complex and/or systemic product, process and material issues through the application of rigorous analytical methods.
- Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines).
FUNCTIONAL RESPONSIBILITIES
- Primary technical interface for manufacturing rack test development efforts from concept through delivery.
- Own driving resolution of all issues regarding test solutions aligned with critical path.
- Reviewer and approver of technical risks, and contingency/mitigation plans.
- Can review and provide input to material plans, test plans, test reports, lessons learned.
- Owns preventative actions so gaps in E2E process or capability are addressed long-term.
- Accountable for managing manufacturing technical and quality excursions through indirect coordination and hands-on engineering analysis as it pertains to your test deliverables.
- Provide technical and product subject matter expertise to the factories and customers.
- Lead highly technical and innovative RFI/RFQ responses supporting new strategic and recurring business opportunities.
KNOWLEDGE REQUIREMENTS
- Strong technical program management skills. Able to lead and direct a broad cross-functional global team.
- Exceptional knowledge and experience regarding product development processes and tools.
- Experience and deep level of understanding of server, storage, networking and GPGPU and PCIe-based accelerator architectures.
- Working knowledge of OS, driver, firmware and hardware architecture, device interactions and ability to leverage expertise to determine root cause that lead to optimized solutions.
- Deep experience in process development and process improvement. Able to lead the development of complex processes spanning multiple functions and areas of expertise.
What is the experience needed to be successful in this role?
- BS degree in Electrical/Computer Engineering, Computer Science or related field is required; MS is preferred.
- 8+ years' experience in a software or hardware product development environment with enterprise server, storage or networking products is required.
- Excellent verbal and written communication skills.
- Prior experience directly or indirectly managing engineering and/or development teams.
- Experience managing remote, multi-national and geographically dispersed development teams.
- Domestic and/or international travel, up to 30%, may be required.
Benefits Package with Jabil
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Competitive Base Salary
- Annual Bonus
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
Remote working/work at home options are available for this role.
Jabil is seeking a Senior Manager, Manufacturing Test Development for our Austin, TX location who will directly contribute to the transformative growth within our Intelligent Infrastructure division by applying unique and innovative approaches to developing end customer product solutions.
You will be responsible for managing the technical direction of Rack scale test software and integration development programs through the lens of the customer, factory, and services. You will also be responsible for partnering and collaborating with Hyperscale & AI customers, strategic suppliers, internal engineering, product management, program management, manufacturing, test and quality teams to ensure your products meet the rigorous standards and performance expectations of Jabil’s world-class manufacturing environments and our customers.
What can you expect to do?
LEADERSHIP RESPONSIBILITIES
- Responsible for ensuring the delivery of all manufacturing test solutions for new and sustaining programs for rack-scale AI/ML and GPGPU and hardware accelerator-based server and storage platforms.
- Accountable for all onsite customer delivery commissioning tests as an extension of the manufacturing test capability.
- Strong ability to organize teams and drive the solution for multiple, complex problems cross-functionally and within various areas of technical expertise (hardware, software, firmware, performance, interoperability, etc.)
- Charged with ensuring the right level of execution discipline and engineering rigor is applied to all technical program deliverables – must lead by example.
- Empowered to make key decisions with respect to quality and features that may impact customer experience.
- Capable of influencing individuals, teams and executives to the level necessary to support delivery of programs within schedule, scope and budget boundaries.
- Able to understand how technical decisions impact the broader business, factories and customers and use these insights to lead the broader organization to optimized outcomes.
- Must be extremely detailed oriented while at the same time able to communicate complex issues in simple, actionable terms at all levels within the organization.
- Must possess a strong balance of technical skills, experience-based judgment and business acumen in all execution and decision-making activities.
- Strong ability to develop, grow and maintain healthy interpersonal relationships with peers, team members, executive leadership, customers and external partners at all times.
- Provide thought leadership and direct engineering support to multiple manufacturing sites in the areas of product, component and supplier expertise.
- Exchange knowledge and information with other Jabil facilities to ensure best practices are both shared and implemented throughout the Jabil organization.
- Guide technical and operational teams towards the successful resolution of complex and/or systemic product, process and material issues through the application of rigorous analytical methods.
- Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines).
FUNCTIONAL RESPONSIBILITIES
- Primary technical interface for manufacturing rack test development efforts from concept through delivery.
- Own driving resolution of all issues regarding test solutions aligned with critical path.
- Reviewer and approver of technical risks, and contingency/mitigation plans.
- Can review and provide input to material plans, test plans, test reports, lessons learned.
- Owns preventative actions so gaps in E2E process or capability are addressed long-term.
- Accountable for managing manufacturing technical and quality excursions through indirect coordination and hands-on engineering analysis as it pertains to your test deliverables.
- Provide technical and product subject matter expertise to the factories and customers.
- Lead highly technical and innovative RFI/RFQ responses supporting new strategic and recurring business opportunities.
KNOWLEDGE REQUIREMENTS
- Strong technical program management skills. Able to lead and direct a broad cross-functional global team.
- Exceptional knowledge and experience regarding product development processes and tools.
- Experience and deep level of understanding of server, storage, networking and GPGPU and PCIe-based accelerator architectures.
- Working knowledge of OS, driver, firmware and hardware architecture, device interactions and ability to leverage expertise to determine root cause that lead to optimized solutions.
- Deep experience in process development and process improvement. Able to lead the development of complex processes spanning multiple functions and areas of expertise.
What is the experience needed to be successful in this role?
- BS degree in Electrical/Computer Engineering, Computer Science or related field is required; MS is preferred.
- 8+ years' experience in a software or hardware product development environment with enterprise server, storage or networking products is required.
- Excellent verbal and written communication skills.
- Prior experience directly or indirectly managing engineering and/or development teams.
- Experience managing remote, multi-national and geographically dispersed development teams.
- Domestic and/or international travel, up to 30%, may be required.
Benefits Package with Jabil
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Competitive Base Salary
- Annual Bonus
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Integration Engineer – DCI Pipes, Frames and Structures (REMOTE) (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Senior Mechanical Systems Engineer - Remote Structures and Piping (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
jobs by
