Engineering Jobs in Tucson Remote

Date Posted:

2026-02-02

Country:

United States of America

Location:

US-AZ-TUCSON-M10 ~ 3360 E Hemisphere Loop ~ BLDG M10

Position Role Type:

Onsite

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Active and transferable U.S. government issued security clearance is required prior to start date.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance​

Security Clearance Type:

DoD Clearance: Secret

Security Clearance Status:

Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression.  We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat.  Our team solves tough, meaningful problems that create a safer, more secure world.

The Mechanical Engineering group in the Shipboard Effectors Department is currently searching for an experienced Mechanical Design Engineer to work on a multi-discipline team to support design and upgrades of Shipboard Effectors products and subsystems.

This is an onsite role and located in Tucson, AZ.  

What You Will Do:

• Utilizing strong mechanical hardware design experience and knowledge with ruggedized structures, interconnects, cooling, and electronics integration

• Supporting all phases of programs from capture and concept development through production

• Developing technical solutions to a wide range of complex problems related to the entire product life cycle including proposal, design, manufacture, integration and test of electronics for multiple military programs

• Supervising the definitions of mechanical outline and construction details, component selection and specification, mechanical and assembly drawings, electrical/RF layout, and delivering the final technical data package

• Employing transition-to-production practices with the ability to lead a design release into production

• Tracking, reporting, and meeting cost, schedule, quality, and performance requirements for the finished product, including Earned Value (EV) management and Estimate at Complete (EAC) inputs

• Preparing proposal inputs on behalf of the product area

• Providing technical conscience, challenged with making sure the product and process meet appropriate standards and requirements while helping to remove roadblocks

• Working with minimal direction or supervision, while exercising considerable latitude in determining the technical objectives of the assignment while meeting cost, schedule, quality, and performance requirements for the finished product.

• Leading a small team of mechanical engineers when required

• Interacting frequently with senior personnel, occasionally including external customers, on significant technical matters often requiring coordination between organizations.

Qualifications You Must Have:

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 8 years of prior relevant experience or An Advanced Degree in a related field and minimum 5 years experience.

• A minimum of eight (8) years of experience in the design of electronics packaging for military or aerospace or commercial applications

• Experience with GD&T (Geometric Dimensioning & Tolerances)

• The ability to obtain and maintain a US security clearance prior to the start date. U.S. citizenship is required as only U.S. citizens are eligible for a security clearance 

Qualifications We Prefer:

• Experience with ANSI drawing standards and/or first order or structural analysis techniques.

• Experience with design to military standards

• Strong technical background with high technical aptitude

• Strong leadership skills and project management, sub contract management experience

• Experience with CREO (Pro/E) or similar 3D solid modeling software

• Cognizant of machine suppliers’ capabilities or have direct experience in a manufacturing and assembly support role for producibility

• Familiarity with the design and manufacturing processes of CCAs, mechanical/RF components, metal housings, structures, and electronics assemblies

• Must have a working knowledge of Microsoft Office (Word, Excel, PowerPoint)

• Very strong verbal and written communications and interpersonal skills when working with team members and customers

• Advanced degree in Mechanical, Electrical or Aerospace Engineering

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

Learn More & Apply Now!

• RTX solves some of the toughest challenges in aerospace and defense. That requires expansive thinking and bold innovation.

• Please consider the following role type definition as you apply for this role.

  • Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

The salary range for this role is 107,500 USD - 204,500 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

2026-02-26

Country:

United States of America

Location:

US-AZ-TUCSON-M02 ~ 1151 E Hermans Rd ~ BLDG M02

Position Role Type:

Onsite

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Active and transferable U.S. government issued security clearance is required prior to start date.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance​

Security Clearance Type:

DoD Clearance: Secret

Security Clearance Status:

Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

Effector RF Design Department is responsible for designing RF and Microwave hardware, including transmitters, receivers, and exciters.  This includes design and test activities that span preliminary design to integration.  Products we develop support radar and datalink applications on a variety of tactical missile programs.  Critical to this role is designing for challenging mechanical constraints and extreme environments.

This position is an onsite role, located in Tucson, AZ.

What You Will Do

• Design and development of transmitters, receivers or exciters
• Design of circuit card assemblies (CCAs) with RF or mixed signals
• Work in a lab to accomplish component characterization as well as module verification and integration
• Test and handle sensitive RF Hardware
• Schematic capture and RF routing
• Partner with interdisciplinary teams - power, digital, mechanical, etc.

Qualifications You Must Have

• Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of eight years of prior relevant experience to include any combination of the following:
  • Experience with RF design and fabrication
  • Experience with RF testing and troubleshooting
  • Experience with the simulation of RF products
  • Experience with any of the following tools:
    • Mentor DX Designer or equivalent
    • High Frequency Structure Simulator (HFSS) or equivalent
    • SystemVue/Genesys or equivalent
    • Advanced Design System (ADS) or equivalent

Qualifications We Prefer

• Mentorship or apprenticeship experience 
• Technical oversight responsibilities for less-senior engineers
• Working across domains on complex projects
• Architecting and requirements definition for complex RF products
• Team leadership experience on technical projects including experience w/ cost and schedule
• EVMS or CAM experience

• Ability to prepare documentation with minimal oversight
• Background in designing for manufacturability, producibility, and cost constraints.  Includes yield and margin analysis
• Technical background in the following areas:
  • Cascade analysis and/or frequency planning
  • Filter design and fabrication
  • Circuit card assembly design and fabrication
  • Testing or designing RF hybrid (chip and wire) technologies
  • High speed data converter test/characterization
  • High power RF design or test experience
  • Scripting experience (Matlab or Python)
• Some front line leadership desirable

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

This position offers relocation based on candidate eligibility.

Learn More & Apply Now!

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

The salary range for this role is 107,500 USD - 204,500 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

2026-02-17

Country:

United States of America

Location:

US-AZ-TUCSON-M02 ~ 1151 E Hermans Rd ~ BLDG M02

Position Role Type:

Onsite

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Active and transferable U.S. government issued security clearance is required prior to start date.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance​

Security Clearance Type:

DoD Clearance: Secret

Security Clearance Status:

Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The Effector Digital Products (EDP) department develops electronics for our weapon system products. We are responsible for the architecture, design, and documentation of deliverable FPGA embedded processing. We engage at the outset of the weapon system development and follow our designs through deployment. Our products are deployed all over the world, from the ground to exoatmospheric environments and into space. 
 
As a Principal FPGA Design Engineer you will develop FPGA designs for all major vendors and device families including: Xilinx, Altera, and Microsemi. Designs are implemented using VHDL for the following applications: gigabit serial interfaces, Radio Frequency (RF) and Electro-Optical (EO) DSP, controls, data links, embedded processing and processor interfaces.

Designers work with circuit card designers and systems engineers to develop requirements, architect new parts, collaborative modeling of algorithms, partition and perform code development, simulation, and place and route. Designs are verified against requirements using both directed test and constrained random methodologies. Design support is expected from requirements definition through integration and test. Design documentation and configuration management are required.

This position is 100% ONSITE in Tucson, Arizona.

What You Will Do

• Deliver production-quality FPGA releases from initial proof of concept to production

• Architect FPGA-based systems to determine parts, interfaces, and Concept of Operations (CONOPS)

• Translate system-level requirements into FPGA requirements.

• Design and code in VHDL for reliability and maintainability.

• Verify designs utilizing self-checking techniques with directed and constrained random tests, while tracking functional and code coverage.

• Drive projects and execute program schedules on time and budget.

• Create complete documentation including requirements, verification plans, and user’s guides.

• Manage moderately sized projects or processes

• Viewed as subject-matter expert within discipline

• Able to operate with minimal oversight from manager

• Coaches, reviews, and delegates work to junior engineers

• Support internal and external technical reviews

• Support customer interactions and relations

• Make improvements to processes, systems or products to enhance overall performance

Qualifications You Must Have

• Bachelor’s Degree in Electrical Engineering, Computer Engineering or Electrical Engineering Technology

• A minimum of eight (8) years of experience to include the following:

  • FPGA/ASIC design (VHDL and/or Verilog coding) or FPGA/ASIC verification (SystemVerilog coding)

  • Xilinx or Microsemi devices and flow tools

  • Delivering FPGA/ASIC solutions to system level applications

  • Hands on experience with integration and debug of FPGA/ASIC devices

• The ability to obtain and maintain a US security clearance prior to the start date. U.S. citizenship is required as only U.S. citizen are eligible for a security clearance.

Qualifications We Prefer

• ​FPGA design experience in one or more of the following areas:

   o Radar processing techniques

  o Image processing techniques for visual and infrared sensors

  o Embedded systems design using ARM, Microblaze, or Nios processors

  o Gigabit serial interfaces and multi-gigabit transceivers (MGT’s)

• Experience leading technical teams and programs

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• This position offers relocation

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role:

Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: position is in beautiful Tucson, AZ. Tucson has a friendly, caring and laid-back atmosphere, combined with the innovation and energy of a metropolitan region and recognized as one of America’s 10 Best Small Cities. Surrounded by beautiful mountains, colorful Sonoran Desert landscape and majestic saguaro cacti, Tucson is blessed with some of nature’s best work. Tucson is known for its bright blue skies, and with more than 310 sunny days per year, Tucson’s fantastic weather lets residents enjoy the outdoors year-round.

Tucson, AZ: ,-az-location

#LI-CV1

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

The salary range for this role is 107,500 USD - 204,500 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

2026-02-26

Country:

United States of America

Location:

US-AZ-TUCSON-M02 ~ 1151 E Hermans Rd ~ BLDG M02

Position Role Type:

Onsite

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Active and transferable U.S. government issued security clearance is required prior to start date.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance​

Security Clearance Type:

DoD Clearance: Secret

Security Clearance Status:

Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The RF Mechanical Team at Raytheon is seeking a talented Senior Engineer to join our team in Tucson, AZ.

The candidate will be responsible for providing innovative design solutions for the packaging of antennas, RF Circuit Card Assemblies, radomes, and RF test equipment. The selected candidate will be expected to lead multidiscipline teams, provide technical oversight, delegate tasks, and work with the Engineering organization to establish technology roadmaps, enable modernization, and contribute to general innovation. In addition, the candidate will work with customer personnel and program leadership to define and refine requirements to validate hardware compliance. The candidate will be responsible for providing guidance, coaching, mentoring, and training to other employees across the business within the candidate’s areas of expertise.

This position is an onsite role, located in Tucson, AZ.

What You Will Do

• Small group technical oversight
• Common and mature RF product packaging development
• Serve as a technical resource to the organization   

                                                                                

Qualifications You Must Have

• Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 5 years of prior relevant experience, to include any combination of the following:
  • Experience performing design and / or analysis for the packaging of RF products (e.g. Circuit Card Assemblies, antennas, radomes, RF test equipment, harnesses and interconnects) throughout the product life cycle to include use of three dimensional (3D) Computer Aided Design (CAD) software
  • Experience with the creation of Technical Data Packages (TDPs) using Geometric Dimensioning and Tolerancing (GD&T) for RF products

  

Qualifications We Prefer

• Master of Science (MS) in mechanical engineering or electrical engineering
• Experience serving as a Responsible Engineering Authority (REA), Control Account Manager (CAM), and/or Integrated Product Team Lead (IPTL)
• Supplier management for built to print or build to specification RF products
• Experience creating and presenting professional level design documentation to company leadership and program customers
• Creo Simulate or ANSYS Workbench for preliminary structural and thermal analysis of design concepts
• Excellent written and verbal communication skills
• Failure investigation, root cause identification, and corrective action implementation
• Familiarity or direct experience with RF Printed Circuit Board (PCB) material stack ups and Circuit Card Assembly (CCA) layout
• One dimensional tolerance analysis for complex mechanical assemblies
• Development of technical proposals, engineering project estimates, and/or white papers
• Requirements verification test planning and execution

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

This position offers relocation based on candidate eligibility.

Learn More & Apply Now!

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

2026-02-25

Country:

United States of America

Location:

US-AZ-TUCSON-9022 ~ 9022 S Rita Rd ~ BLDG 9022

Position Role Type:

Onsite

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

The ability to obtain and maintain a U.S. government issued security clearance is required.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Security Clearance Type:

DoD Clearance: Secret

Security Clearance Status:

Active and existing security clearance required after day 1

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression.  We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat.  Our team solves tough, meaningful problems that create a safer, more secure world.

What You Will Do:

As a Sr. Manufacturing Development Engineer you’ll lead and coordinate projects and improvements across the extended value streams by providing technical manufacturing support to a program from the early development phases through transition to production.

In this highly visible role, you’ll leverage your technical knowledge of manufacturing capabilities, product technologies, factory requirements and business processes to establish and execute the manufacturing plan and influence technical program decisions to support the overall program value stream.

Typical Responsibilities will Include:

• Participation in manufacturing and test requirements development
• Design for manufacturing activities
• Manufacturing process development and factory capabilities analysis to ensure factory readiness and improve product producibility

Your main responsibilities will include:

• Developing Manufacturing Data Packages (MDPs) including assembly instructions, workflow/routing, labor standards, tool and fixture designs.
• Providing technical input and peer review to engineering designs and design changes.
• Providing technical guidance and problem solving to factory engineers
• Applying manufacturing engineering skillsets across the extended value stream to resolve constraints and improve process and product designs

Other Responsibilities may Include:

• Serving as the manufacturing and producibility authority within the program
• Recommending process and procedural changes to ensure that objectives in the areas of cost, efficiency, and quality are met
• Designing, controlling, and improving the producibility of products through collaboration with a multi-disciplined team
• Identifying and resolving constraints across the program
• Participating in corrective action investigation

This job is posted as ONSITE and is based at Raytheon’s Tucson, AZ facility.

Qualifications You Must Have:

• Typically Requires a Bachelor’s Degree in Science, Technology, Engineering, or Mathematics (STEM), and minimum 5 years of relevant experience.
• Experience working in manufacturing production.
• Experience with manufacturing process development or improvement
• Ability to work on programs requiring special program access
• Ability to obtain and maintain a Bureau of Alcohol, Tobacco, Firearms and Explosives Access (ATF) clearance.

Qualifications We Prefer:

• Ability to identify, reduce and eliminate cost, quality and schedule constraints through technical engagements along with an innovative mindset that drives continuous improvement, lean manufacturing and keeps pace with advances in technology
• Technical drawing interpretation, Geometric Dimensioning and Tolerancing (GD&T) and proficiency with CAD solid modeling tools (preference for CREO/ProE)
• Demonstrated hands-on mechanical aptitude with the ability to work across disciplines in a team environment
• Experience with technical writing and interpreting and improving technical drawings and communicating technical information to different audiences
• Experience with MRP systems and Manufacturing Readiness Assessments
• Prefer Bachelor’s Degrees in the following areas: Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, Chemical Engineering, or Electrical Engineering
• Current DoD security clearance (secret)

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.  Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. 

• This position requires ability to obtain a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Security Clearance FAQs - United States Department of State

• This position is an onsite role – Tucson, AZ: ,-az-location

• We Are RTX

We Are RTX - YouTube

• #LI-ONSITE

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

**This position supports hybrid work schedule depending on organization needs.**

About Jabil:

Jabil is a leading product solutions provider offering end-to-end design, manufacturing, supply chain, and product management services. With operations in over 100 facilities across 30 countries, Jabil delivers innovative, integrated, and customized solutions to clients across diverse industries—including automotive, consumer lifestyle and wearables, defense and aerospace, smart home and building, industrial and energy, enterprise and infrastructure, healthcare, mobility, packaging, and printing.

JOB SUMMARY

Jabil is seeking a Manufacturing Test Development who will directly contribute to the transformative growth within our Enterprise and Intelligent Infrastructure division by applying unique and innovative approaches to solving problems within a large-scale software production environment. You and your team will be responsible for contributing to the end-to-end architecture, definition, development and production deployment of production software applications and infrastructure spanning multiple customers and manufacturing regions. You will also be responsible for interfacing with internal engineering, manufacturing and quality teams and our end customers to ensure your software deliverables meet the rigorous standards of Jabil’s world-class manufacturing environments.

ESSENTIAL DUTIES AND RESPONSIBILITIES

LEADERSHIP AND MANAGEMENT RESPONSIBILITIES

- People manager for a team of software developers and product engineers in support of global cloud operations.
- Attract, hire, onboard, lead, coach, mentor and inspire your team to deliver the best in class for our customers and employees
- Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines).
- Solicit ongoing self and team feedback from the business unit (BU), customer and team members.
- Perform team member evaluations professionally and on time.
- Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
- Coordinate activities of team and keep them focused in times of crises.
- Ensure recognition and rewards are managed fairly and consistently in area of responsibility.

FUNCTIONAL MANAGEMENT RESPONSIBILITIES

- Plan and formulate aspects of Customer BU projects such as objective or purpose of project, applications that can be utilized from findings, costs of project, and equipment and human resource requirements, technical requirements.
- Provide direction on design and development activities to improve, modify or design new equipment products and processes.
- Oversee key projects, processes and performance reports, data, and analysis.
- Develop, determine, and implement policies, procedures and programs.
- Analyze technology trends, human resources needs and market demand to plan projects.

- Oversee definition and collaboration on overall test infrastructure and application architectures.
- Creation of behavioral and high-level software design specifications.
- Development of production infrastructure and related application code.
- Lead and participate in peer/code reviews.
- Contribute and improve software build methodology, procedures, and environment.
- Operational and development support for the software and test infrastructure at production facilities

MANAGEMENT & SUPERVISORY RESPONSIBILITIES

- Reports to Management

JOB QUALIFICATIONS AND KNOWLEDGE REQUIREMENTS

- Knowledge of professional software engineering practices for the complete software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations.
- Agile, CICD, and SLDC process implementation and application experience.
- Knowledge/Expertise in the following programming/scripting languages: Python, BASH, Java experience a plus.
- Linux development experience with a solid understanding of its fundamentals and internals: Ubuntu/ CentOS
- Well-versed in the following container/virtualization environments: VMware, Docker.
- Solid understanding of large-scale distributed systems in practice, including multi-tier architectures, application security, monitoring and storage systems.
- Experience with front-end and back-end Web UI design.
- Experience with common web APIs (REST, XML-RPC).
- Experience with hardware and API solutions for controlling, managing and stressing L10 devices (servers, network and storage SSDs, NVMe): IPMI, Redfish, mprime, FIO, Linpack, ptugen, memtester
- Experience in the creation and configuration(DHCP, PXE boot, nginx) of Virtual Machines (VMs), VMWare preferred.
- Experience with leading edge networking systems, hardware, software and protocols including but not limited to enterprise ethernet datacenter switching/routing L1, L2, and L3 (BGP, DHCP Relay, ECMP). Arista CloudVision is a plus
- Experience with code versioning tools (Git preferred)
- Experience with front-end and back-end Web UI design.
- Experience with common web APIs (REST, XML-RPC).

EDUCATION & EXPERIENCE REQUIREMENTS

- BS degree in Electrical/Computer Engineering, Computer Science, or related field. MS preferred.
- 10+ years’ experience in a software development/test capacity with enterprise server, storage, or networking products. 3+ years people management experience.
- Excellent verbal and written communication skills.
- Prior experience directly managing software development teams
- Experience managing remote, multi-national and geographically dispersed development teams.
- Domestic and/or International travel, up to 25%, may be required.
Remote working/work at home options are available for this role.

Job Title: Lead Electrical CAD Designer

Job Family: General Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.

What will you do?

- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed

- Participating in design reviews to ensure accuracy and compliance with requirements

- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control

- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards

- Work closely with engineers and other designers to meet product specifications and performance requirements

- Modify and revise designs to correct operating deficiencies or to reduce production problems

- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.

- Check and validate designs to ensure they meet required quality and safety standards

- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications

- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications

- Designing and creating schematic PLC input/output connections.

- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.

- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team

- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration

- Capable of creating a Bill of Materials (BOM) for release to manufacturing

- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers

- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs

- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required

Experience:

- 6-8 years of experience in electrical design within the power distribution or data center industry.

- Proven experience as a CAD designer, preferably in an electrical engineering environment.

- Proficiency in CAD software (AutoCAD Electrical, Revit).

- Strong understanding of electrical systems, integration strategy, and system coordination

- Excellent problem-solving skills and attention to detail

- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently

Knowledge, Skills, Abilities:

- Strong knowledge of electrical design, manufacturing processes, and material properties.

- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.

- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.

- Excellent interpersonal and communication skills.

- Creative, self-motivated, accountable, and team-oriented.

- Able to work independently with minimal oversight.

- Effective at presenting information and responding to management, clients, and public queries.

- Capable of influencing others and sharing best practices.

- Comfortable working as part of a global team.

- Capable of assessing projects, articulating risks, and developing project milestones.

- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.

JOB SUMMARY

ESSENTIAL DUTIES AND RESPONSIBILITIES

· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS

· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Remote working/work at home options are available for this role.

Job Title: Lead Electrical CAD Designer

Job Family: General Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.

What will you do?

- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed

- Participating in design reviews to ensure accuracy and compliance with requirements

- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control

- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards

- Work closely with engineers and other designers to meet product specifications and performance requirements

- Modify and revise designs to correct operating deficiencies or to reduce production problems

- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.

- Check and validate designs to ensure they meet required quality and safety standards

- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications

- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications

- Designing and creating schematic PLC input/output connections.

- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.

- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team

- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration

- Capable of creating a Bill of Materials (BOM) for release to manufacturing

- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers

- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs

- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required

Experience:

- 6-8 years of experience in electrical design within the power distribution or data center industry.

- Proven experience as a CAD designer, preferably in an electrical engineering environment.

- Proficiency in CAD software (AutoCAD Electrical, Revit).

- Strong understanding of electrical systems, integration strategy, and system coordination

- Excellent problem-solving skills and attention to detail

- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently

Knowledge, Skills, Abilities:

- Strong knowledge of electrical design, manufacturing processes, and material properties.

- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.

- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.

- Excellent interpersonal and communication skills.

- Creative, self-motivated, accountable, and team-oriented.

- Able to work independently with minimal oversight.

- Effective at presenting information and responding to management, clients, and public queries.

- Capable of influencing others and sharing best practices.

- Comfortable working as part of a global team.

- Capable of assessing projects, articulating risks, and developing project milestones.

- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.

Job Title: Sr. Principal Electrical Design Engineer

Job Family: Electrical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

Jabil has an exciting opportunity for a highly experienced and technically proficient Principal Electrical Engineer to engage in the design, fabrication, and integration of electrical systems for data center power and cooling products, as well as factory enablement projects. This role includes full-stack electrical design from generator systems to AI rack integration zones, with a focus on PDUs, UPS systems, MV/HV power distribution, phased power infrastructure, and controls architecture. The ideal candidate will bring deep technical expertise and a passion for delivering scalable, reliable, and compliant infrastructure solutions.

The Sr. Principal Electrical Integration Engineer will manage and oversee the electrical systems essential for the data center, energy storage systems, and HVAC applications. This role will involve developing specifications, selecting key components, routing wires and cables, establishing connections, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.

What will you do?

Product & System Design:

- Knowledge of high-efficiency power conversion and point-of-load regulation for AI/ML server racks (BBU, rPDU).
- Understanding of rack power zoning, load balancing, and redundancy strategies for tiered compute workloads.
- Ensure electrical systems are properly integrated into fabricated enclosures and structural assemblies.
- Lead the electrical design and integration of UPS systems, power conversion units, and safety interlocks.
- Develop and maintain single-line and three-line diagrams for power distribution systems, ensuring clarity, accuracy, and compliance with NEC, IEEE, and UL standards.
- Design and validate three-phase power systems, including load balancing, fault protection, and redundancy strategies for high-availability environments.
- Engineer and integrate medium-voltage (MV) and high-voltage (HV) power distribution components such as switchgear, transformers, busways, and protective relays.
- Specify and qualify electrical components including circuit breakers, contactors, CTs/PTs, surge protection devices, isolation switches for MV/HV applications and the design and development of wiring harnesses

Factory & Facility Integration:

- Design end-to-end electrical distribution systems from generator and utility interface to AI rack integration zones.
- Coordinate with cross functional teams to ensure electrical infrastructure aligns with facility layout, safety codes, and operational requirements.
- Plan and implement power redundancy, load segmentation, and scalable distribution architectures to support high-density compute environments.
- Ensure proper grounding, EMI shielding, and thermal management across all facility-level electrical systems.

Fabrication & Implementation:

- Define fabrication processes including panel building, cable routing, and system integration, ensuring manufacturability and serviceability.
- Perform electrical load calculations, short-circuit analysis, arc flash studies, and thermal modeling using tools such as ETAP, SKM PowerTools, or EasyPower.
- Lead design reviews, risk assessments, and validation testing to ensure compliance with UL, IEC, NEC, CE, RoHS, and REACH standards.
- Interface with suppliers and customers resolve fabrication and quality issues, and ensure adherence to specifications.
- Support prototype builds, field deployments, and customer engagements to gather feedback and refine designs.

Controls Architecture:

- Develop and implement electrical controls architecture for power and cooling systems, including PLCs, SCADA integration, and remote monitoring capabilities.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Collaborate with software and automation teams to ensure seamless integration of control systems with facility and product-level infrastructure.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.

Leadership & Documentation:

- Develop and maintain engineering documentation including BOMs, test procedures, and engineering change orders (ECOs).
- Mentor junior engineers and provide technical leadership across cross-functional teams.
- Drive continuous improvement initiatives focused on cost reduction, design for manufacturability (DFM), and product scalability

How will you get here?

Education:

- Bachelor’s Degree in Electrical Engineering or related engineering discipline.

Experience:

- 10+ years of experience in electrical design and fabrication, with a focus on data center or industrial power systems
- Proficiency in ECAD tools (AutoCAD Electrical, EPLAN, SolidWorks Electrical) and integration with mechanical CAD platforms
- Strong understanding of MV/HV power distribution, lithium-ion UPS systems, and three-phase electrical infrastructure
- Experience with electrical analysis tools (ETAP, SKM PowerTools, EasyPower)
- Proven experience in facility-level electrical design and construction support and Excellent leadership, communication, and cross-functional collaboration skills

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail

Preferred Qualifications: 

- Master’s Degree in Electrical Engineering
- Active Professional Engineer (PE) license
- Experience with data center infrastructure: UPS systems, switchgear, CRAC units, and PDUs
- Familiarity with global compliance standards: UL, CE, RoHS, REACH, and IEEE.
- Hands-on experience with panel fabrication, wiring, and system integration
- Knowledge of thermal and mechanical constraints in electrical enclosure design and experience working with global suppliers and contract manufacturers
- Experience in WindChill and DevOps
Remote working/work at home options are available for this role.