Engineering Jobs in Tucson Remote

Date Posted:

2026-02-17

Country:

United States of America

Location:

US-AZ-TUCSON-M02 ~ 1151 E Hermans Rd ~ BLDG M02

Position Role Type:

Onsite

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Active and transferable U.S. government issued security clearance is required prior to start date.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance​

Security Clearance Type:

DoD Clearance: Secret

Security Clearance Status:

Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

The Effector RF team at Raytheon is seeking an experienced Principal Electrical Engineer to join our team in Tucson, AZ. This role offers a unique opportunity to contribute to state-of-the-art sensor and radome measurement system technology and play a key role in driving innovation in defense solutions.

In this position, you will focus on shaping and advancing sensor and radome measurement system capabilities. Your expertise will be integral to the design, development, and validation of high-performance systems that meet stringent requirements.

This position is an onsite role based in Tucson, AZ.

What You Will Do:

• Design and develop sensor and radome hardware measurement systems.

• Create detailed calibration procedures for automated measurement systems.

• Collaborate with suppliers of sensor and radome measurement systems.

• Analyze sensor test data to verify system performance against requirements.

• Work with interdisciplinary engineering teams, including thermal, structural, mechanical, and systems engineering.

Qualifications You Must Have:

• Typically requires a Bachelor of Science degree in a STEM field (Science, Technology, Engineering, Mathematics) and a minimum of 8 years of relevant experience, or 6 years with a related advanced degree, with any combination of the following:

  • Experience with sensor integration trades/studies, preliminary design, final design, and / or validation.

  • Experience with sensor measurements using near-field systems.

                                                                              

   Qualifications We Prefer:

• Master of Science (MS) or Doctor of Philosophy (PhD) in electrical engineering.

• Specialized knowledge of spherical near-field measurement systems.

• Experience integrating spherical near-field measurement systems with sensor hardware through detailed validation processes.

• Proficiency in near-field to far-field processing algorithms.

• Strong understanding of radar principles.

• Experience analyzing and presenting technical data to stakeholders.

• Exceptional written and verbal communication skills.

• Proven ability to manage multiple priorities and execute technical plans effectively.

• Strong interpersonal skills for collaborating in a team environment.

• Experience participating in or presenting to boards such as Failure Review Board (FRB), Engineering Review Board (ERB), Change Control Board (CCB), or Manufacturing Review Board (MRB).

• Knowledge of designing complex multi-layer radomes.

• Proficiency in programming languages such as Python or MATLAB.

• Familiarity with high-performance computing (HPC) environments and schedulers like SLURM.

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

This position offers relocation based on candidate eligibility.

Learn More & Apply Now!

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

The salary range for this role is 107,500 USD - 204,500 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

2026-02-10

Country:

United States of America

Location:

US-AZ-TUCSON-9020 ~ 9020 S Rita Rd ~ BLDG 9020

Position Role Type:

Onsite

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Active and transferable U.S. government issued security clearance is required prior to start date.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance​

Security Clearance Type:

DoD Clearance: Secret

Security Clearance Status:

Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression.  We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat.  Our team solves tough, meaningful problems that create a safer, more secure world.

Raytheon engineers develop the next generation of defense technologies that support our military and protect our nation and allies. We are the world’s leader in developing cutting edge defense technologies through simulation-driven virtual environments. Our software products empower the next generation of innovative weapons systems and advanced AI/ML solutions.

We are looking for Systems Engineer II - Modeling Simulation & Analysis Engineers who enjoy solving complex problems, engaging in a dynamic team environment, and are eager to learn.

As a Systems Engineer II - Modeling Simulation & Analysis Engineer, you will participate in challenging multi-disciplinary work across integrated product teams consisting of Guidance, Navigation & Control (GNC), Signal Processing and missile-and-sensor-level Performance Simulations. Our Performance Simulation teams provide, develop, and maintain high fidelity performance simulations, evaluate system performance, support new business initiatives and develop & execute technology roadmaps.  This is an Onsite role in Tucson, AZ.

What You will Do

• You will create high fidelity simulations and models for missile design, performance assessment, and flight test support
• You will be responsible for the development and implementation of modeling solutions, and subsequently conduct trade studies and evaluation of system and subsystem performance
• You will work in a team environment, receiving input from the team supervisors and providing guidance and/or direction to other team members
• You will collaborate with Guidance, Navigation & Control (GNC), Signal Processing, and other performance personnel to perform simulation activities according to the program schedule
• You will work on different projects, determine, and develop approaches and solutions, and provide development guidance throughout the product lifecycle from initial concept to fielded product
• You will provide technical expertise for the simulation products of a specific program, and assist Senior Modeling Engineers in the preparation of detailed plans, and may interact with government counterparts as an authority on simulation products

Qualifications You Must Have

• Typically requires a Bachelor’s degree in Engineering, Science, Physics, Mathematics, or a related STEM degree and a minimum of 2 years of relevant prior experience
• Experience applying object-oriented software design and programming in C or C++
• Experience using Python or MATLAB for evaluation of data sets
• Experience modeling or simulating physical systems
• Experience in modeling, simulation, statistics, and/or analysis for existing or proposed engineering solutions
• Ability to obtain an Interim Secret U.S. government issued Security Clearance is required prior to start date with the ability to obtain special program access after start. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Qualifications We Prefer

• Advanced Degree in Engineering, Science, Mathematics, or related STEM degree
• Experience using applied system engineering principals, experience working on a team and/or by yourself, interfacing with multiple engineering disciplines
• Experience creating and/or presenting technical briefings
• Experience developing signal processing / GNC algorithms or models for missile applications
• Experience with control hardware design & test and/or hardware & software integration
• Experience modeling physics and/or modeling physical systems as related to flight dynamics
• Experience using UNIX / Linux based workstations and using Software Configuration Management tools such as Git
• Course work or experience in some of the following fields: radar, signal & image processing, radar and/or EO/IR environment models, digital communications, probability and statistics, linear algebra, estimation theory, optimal control, system architecture, inertial navigation, guidance theory

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation Eligible – relocation assistance available for this position

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.  Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

• This position requires onsite work in Tucson, AZ: ,-az-location

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Leading Electronics Manufacturer Is Searching For Engineering Talent to Join Their Dynamic Team! This Jobot Job is hosted by: Mathew Fallon Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.

Salary: $118,000
- $150,000 per year A bit about us: We are a leading manufacturer of high-precision power analog components.

Looking to add top Engineering talent to our dynamic and growing team.

Why join us? Competitive PTO Package Great Work Life Balance Full Benefits Packages 401k Matching Tuition Reimbursement Bonus Opportunties Job Details Job Details: We are seeking a driven and innovative Analog Design Engineer to join our dynamic team.

This permanent position will play a crucial role in developing and implementing cutting-edge electronic components and systems.

You will be working on a variety of projects, including high-voltage design, integrated circuit (IC) design products, and surface-mount technology (SMT) assembly.

This is an exciting opportunity for an experienced engineer who is passionate about analog design and eager to make significant contributions to our ongoing projects.

Responsibilities: 1.

Design and develop analog circuits and systems from concept to production.

2.

Utilize your expertise in SMT assembly and high-voltage design to create innovative solutions for our projects.

3.

Supervise SMT circuit production, ensuring that all components meet our high standards of quality and reliability.

4.

Collaborate with cross-functional teams to integrate analog design elements into broader project goals.

5.

Conduct bread boarding and prototyping activities to test and refine designs.

6.

Troubleshoot and resolve issues that arise during the design, testing, or production stages.

7.

Stay updated with the latest technological advancements, integrating new knowledge into your work.

8.

Prepare technical reports and documentation to provide clear and concise information about your designs and their functionality.

Qualifications: 1.

Bachelor's Degree in Engineering or a related field.

2.

A minimum of 5 years of experience in analog design engineering.

3.

Proven experience with SMT assembly, high-voltage design, and IC design products.

4.

Proficiency in bread boarding and prototyping.

5.

Excellent problem-solving skills and the ability to troubleshoot complex design issues.

6.

Strong communication skills to effectively collaborate with team members and present technical information.

7.

Proficiency in using design software and tools.

8.

A strong understanding of electronic principles and circuit analysis.

9.

Demonstrated ability to manage multiple projects simultaneously and meet deadlines.

10.

Strong attention to detail and a commitment to producing high-quality work.

Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.

Jobot is an Equal Opportunity Employer.

We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.

Jobot also prohibits harassment of applicants or employees based on any of these protected categories.

It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.

Sometimes Jobot is required to perform background checks with your authorization.

Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.

Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.

By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.

Frequency varies for text messages.

Message and data rates may apply.

Carriers are not liable for delayed or undelivered messages.

You can reply STOP to cancel and HELP for help.

You can access our privacy policy here: /privacy-policy

Date Posted:

2026-03-04

Country:

United States of America

Location:

US-AZ-TUCSON-M10 ~ 3360 E Hemisphere Loop ~ BLDG M10

Position Role Type:

Onsite

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Active and transferable U.S. government issued security clearance is required prior to start date.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance​

Security Clearance Type:

DoD Clearance: Secret

Security Clearance Status:

Active and existing security clearance required on day 1

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The PCAS department is seeking an embedded firmware engineer for algorithm development and implementation in a variety of electromechanical control assemblies. 

What You Will Do

• You will help design, implement and verify motor control embedded firmware designs for current and future Control Actuation Systems.

• You will implement digital control algorithms in C/C++ in conjunction with the Controls and Algorithms team.

• Additionally, you will interact with mechanical and electrical design engineers and vendors to optimize hardware designs.

What You Will Learn

• You will have the opportunity to perform hands-on hardware and firmware integration and verification testing in a laboratory environment. 

• Solid understanding of C/C++ development, experience with MATLAB/Simulink and the ability to work with electrical and mechanical hardware. 

• You will have the opportunity to mentor early career engineers.

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 8 years of prior relevant experience.

• A minimum of 8 years of experience in embedded firmware design, development and/or verification.

• Experience with C/C++ development on any embedded hardware platforms.

• Experience with model development and data analysis in MATLAB/Simulink

• Ability to obtain and maintain a US security clearance prior to the start date.  U.S. citizenship is required as only U.S. citizens are eligible for a security clearance.

Qualifications We Value

• Experience of developing firmware or software for safety significant environments including requirements development and traceability, design decomposition and documentation, static code analysis, design to safety critical coding standards such as MISRA-C, test case development, code coverage including modified decision/code coverage (MC/DC), code coverage analysis and formal qualification testing.

• A working understanding of configurable logic (FPGA firmware) and VHDL.

• Experience implementing digital control algorithms in hardware including embedded microcontrollers, digital signal processors, FPGAs and a working understanding of serial communication interfaces, analog to digital converters, and PWM generators.

• Experience working with and integrating hardware.

• Basic understanding of modeling and controls of electric motors and solid background in PMSM motor fundamentals

• Digital and analog signal electronics design, development and verification.

• Use of software/firmware configuration management tools such as GIT, Subversion or similar tools

• Strong verbal and written communication and ability to work hands-on in teams.

• Basic proficiency with model development and data analysis in MATLAB/Simulink

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation Eligibility

Learn More & Apply Now! (Optional)

• Please consider the following role type definition as you apply for this role.

• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

The salary range for this role is 107,500 USD - 204,500 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Data Analytics Manager Job Summary: In this role, you will be responsible for directing, coordinating, and administrating all aspects of data analytics for the credit union.

Salary: $118,000-$147,000 yearly Depending on Experience This is an in-person position About Us: Hughes Federal Credit Union is dedicated to providing a positive difference in our members’ financial lives.

Our commitment to the Tucson community extends beyond our members as we sponsor and support local charities and organizations that promote the financial literacy of future generations.

Join our team and see why we have been named a “Best-In-State” credit union, four years in a row! Key Responsibilities: Responsible for the overall strategy, design, development, testing, deployment and enhancement of custom databases, data structures, datasets, analytic dashboards, and reporting solutions.

Effectively manages the Data Analytics team to ensure timely and accurate reporting on a continuous basis.

Directs the mitigation of technical debt.

Oversees the tracking, coordination, and resolution of reported data analytics issues from staff/management.

Oversees administration and maintenance of the data warehouse, infrastructure, environments, and tools associated with data analytics functions.

Provide monthly and/or quarterly status updates for all ongoing or upcoming projects.

Monitor budgeted expenses for application development/data analytics infrastructure, environments, and tools.

Review associated invoices, bids, and estimates associated with data analytics functions.

Monitor vendor and contractor performance associated with data analytics functions.

Review vendor/contractor agreements and contracts as needed.

Perform vendor/contractor evaluations to ensure highest level of satisfaction in results.

Participate in annual budget planning with department/branch managers and executives.

Train, coach, and mentor staff; monitor performance, support productivity, and identify opportunities for automation and operational efficiencies.

Manage external agencies, vendors, and third-party partners, including vendor due diligences, relationship management, and service-level oversight.

Perform periodic reviews of operational activities as assigned by senior management.

Work directly with internal auditors, and NCUA/CPA examiners to meet or exceed audit and examination expectations.

Review, update, and periodically test the Business Continuity Plan.

Ensure that all actions associated with department related functions are within established credit union policies and procedures and compliant with all applicable law and regulations such as, but not limited to: Fair Debt Collection Practices Act (FDCPA), Telephone Consumer Protection Act (TCPA), Truth in Lending (Reg Z), Bank Secrecy Act (BSA), Fair Credit Reporting Act (FCRA), Equal Credit Opportunity Act (ECOA), Home Mortgage Disclosure Act (HMDA), TILA-RESPA Integrated Disclosures (TRID), Generally Accepted Accounting Principles (GAAP), Office of Foreign Assets Control (OFAC), Dodd-Frank Act, and Military Lending Act (MLA).

Respond and act as needed to all internal and external audits.

Perform periodic review of applicable policies and procedures that impact the department.

Qualifications: Required Skills: Five to ten years of similar or related experience.

Equivalent to a bachelor’s degree in computer science, Information Systems, Engineering, Math or related major, or completion of a specialized course of study at a business or trade school.

Strong leadership, coaching, and mentoring skills with experience developing high-performing teams.

What We Offer: Generous Paid Time Off Policy Up to 15 days in 1st year of service Paid Time Off increases with tenure VTO (Volunteer Time Off) Up to 16 hours yearly 401(k) plan 7% company match Health, Dental, and Vision Insurance Health Savings Account with Employer Contribution Available Free Vision Insurance Life and Disability Insurance Provided by the Credit Union with Optional Supplemental Coverage Available Competitive Wage and Professional Development Educational Assistance Hughes Federal Credit Union is a background screening, credit check and E-Verify workplace.

Now offering $5,000 sign on bonuses for new hires joining Jabil as a new Manufacturing Engineering Technician

We’re expanding into a full 24/7 operation and are hiring across multiple roles and experience levels. Our 12‑hour overnight shift is ideal for someone who enjoys a more independent work environment with more days off each week. You’ll benefit from premium shift differentials, cross‑training opportunities, and the chance to shape processes on a growing team. If you’re someone who prefers working nights or wants to maximize earning potential while enjoying a schedule with fewer total days giving you additional full days off during the week to spend with family, pursue hobbies, or rest, this could be a great fit for you.

Currently hiring Technicians for the below shifts.

Note: Based on the 2-week rotating shift pattern, employees will be scheduled to work 36 hours one week, and 48 hours on the alternate week. In this alternate week, employees will be receiving 8 hours of overtime, resulting in 16 hours of overtime pay in a month.

Shift A– 6pm to 6am 15% shift differential pay

Week 1: Tuesday, Thursday, and Friday

Week 2: Monday, Wednesday, Saturday and Sunday

Shift B – 6pm to 6am 15% shift differential pay

Week 1: Monday, Wednesday, Saturday and Sunday

Week 2: Tuesday, Thursday, and Friday

Shift D – 6pm to 6am 15% shift differential pay

Week 1: Tuesday, Thursday, and Friday

Week 2: Monday, Wednesday, Saturday and Sunday

How will you make an impact!
In this key Manufacturing Engineer Technician onsite role, you will perform preventative maintenance, calibration, change overs in Z-prep area and perform preventive maintenance for tooling (SMT & BE process) and other specialty support equipment used in the manufacturing process.

Location: This role will be based on-site at one of our St. Petersburg Florida Facilities located in Seminole, FL specializing in Renewable Energy

What will you do?

Key Responsibilities

- Operate, monitor, and adjust SMT equipment while ensuring high quality and process stability.

- Perform setups, changeovers, and material verification for each process step.

- Conduct preventive and corrective maintenance on:

- Laser marking systems

- Glue dispensing machines (CAMALOT)

- Screen printers (DEK)

- SPI systems (KOH YOUNG)

- Pick & place machines (FUJI NXT, AIM)

- Reflow ovens (ITW/VITRONIC)

- Troubleshoot and resolve process issues related to solder paste printing, component placement, inspection, and reflow profiling.

- Create, modify, and optimize SMT programs (FUJI, CAMALOT, DEK, etc.).

- Document downtime, maintenance activities, root cause analysis, and improvements.

- Collaborate with Engineering, Quality, and Production to improve OEE, yields, CP/CPK, and reduce rework.

- Ensure compliance with safety standards, ESD controls, and manufacturing best practices.

- Cover overtime requirements as needed.

How will you get here?

Education and Experience:
- Electronics Industry Experience

- High School Diploma or GED preferred not required or equivalent - experience.

- Six months of demonstrated experience, ideally 2 plus years.

- Must have experience with at least one of the below:

- Laser marking systems

- Glue dispensing machines (CAMALOT)

- Screen printers (DEK)

- SPI systems (KOH YOUNG)

- Pick & place machines (FUJI NXT, AIM)

- Reflow ovens (ITW/VITRONIC)

Why Join Jabil?

- Be part of a mission-critical team supporting Renewable Energy innovation.

- Gain hands-on experience with high-precision, advanced technologies.

- Work in a culture focused on quality, safety, and continuous improvement.

- Competitive compensation and a comprehensive benefits package.
Remote working/work at home options are available for this role.

Job Title: Principal Electrical Design Engineer

Job Family: Electrical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.

This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.

What will you do?

- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems

How will you get here?

Education:

- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.

Experience:

- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:

- PLC programming (Allen-Bradley, Siemens, Schneider Electric)

- Building Management Systems (BMS) integration and optimization

- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics

- Automatic Transfer Switches (ATS) control and failover logic

- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems

Preferred Qualifications: 

- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.

Job Title: Principal Electrical Controls Engineer

Job Family: Electrical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.

This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.

What will you do?

- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.

- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.

- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.

- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.

- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.

- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.

- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.

- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.

- Drive the development of system-level simulations and digital twins to validate control strategies before deployment

- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools

- Establish design patterns and best practices for modular and reusable control logic across projects

- Lead root cause analysis and resolution of complex control system issues during commissioning and operations

- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency

- Develop and maintain documentation for system architecture, control logic, and operational procedures

- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure

- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints

- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines

- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems

How will you get here?

Education:

- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.

Experience:

- 8+ years pf experience in control system design and implementation

- Deep expertise in the following:

- PLC programming (Allen-Bradley, Siemens, Schneider Electric)

- Building Management Systems (BMS) integration and optimization

- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics

- Automatic Transfer Switches (ATS) control and failover logic

- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)

- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)

- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight as part of a global team

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices while mentoring less experienced engineers

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Excellent problem-solving skills and attention to detail

- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus

- Experience with hyperscale or colocation data center environments

- Familiarity with low and medium-voltage systems

Preferred Qualifications: 

- Master’s Degree in Electrical Engineering or a relevant engineering discipline

- Active Professional Engineer (PE) license

- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.

- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.

Job Title: Lead Electrical CAD Designer

Job Family: General Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.

What will you do?

- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed

- Participating in design reviews to ensure accuracy and compliance with requirements

- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control

- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards

- Work closely with engineers and other designers to meet product specifications and performance requirements

- Modify and revise designs to correct operating deficiencies or to reduce production problems

- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.

- Check and validate designs to ensure they meet required quality and safety standards

- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications

- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications

- Designing and creating schematic PLC input/output connections.

- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.

- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team

- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration

- Capable of creating a Bill of Materials (BOM) for release to manufacturing

- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers

- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs

- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required

Experience:

- 6-8 years of experience in electrical design within the power distribution or data center industry.

- Proven experience as a CAD designer, preferably in an electrical engineering environment.

- Proficiency in CAD software (AutoCAD Electrical, Revit).

- Strong understanding of electrical systems, integration strategy, and system coordination

- Excellent problem-solving skills and attention to detail

- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently

Knowledge, Skills, Abilities:

- Strong knowledge of electrical design, manufacturing processes, and material properties.

- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.

- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.

- Excellent interpersonal and communication skills.

- Creative, self-motivated, accountable, and team-oriented.

- Able to work independently with minimal oversight.

- Effective at presenting information and responding to management, clients, and public queries.

- Capable of influencing others and sharing best practices.

- Comfortable working as part of a global team.

- Capable of assessing projects, articulating risks, and developing project milestones.

- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.

Job Title: Lead Electrical CAD Designer

Job Family: General Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.

What will you do?

- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed

- Participating in design reviews to ensure accuracy and compliance with requirements

- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control

- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards

- Work closely with engineers and other designers to meet product specifications and performance requirements

- Modify and revise designs to correct operating deficiencies or to reduce production problems

- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.

- Check and validate designs to ensure they meet required quality and safety standards

- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications

- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications

- Designing and creating schematic PLC input/output connections.

- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.

- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team

- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration

- Capable of creating a Bill of Materials (BOM) for release to manufacturing

- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers

- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs

- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required

Experience:

- 6-8 years of experience in electrical design within the power distribution or data center industry.

- Proven experience as a CAD designer, preferably in an electrical engineering environment.

- Proficiency in CAD software (AutoCAD Electrical, Revit).

- Strong understanding of electrical systems, integration strategy, and system coordination

- Excellent problem-solving skills and attention to detail

- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently

Knowledge, Skills, Abilities:

- Strong knowledge of electrical design, manufacturing processes, and material properties.

- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.

- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.

- Excellent interpersonal and communication skills.

- Creative, self-motivated, accountable, and team-oriented.

- Able to work independently with minimal oversight.

- Effective at presenting information and responding to management, clients, and public queries.

- Capable of influencing others and sharing best practices.

- Comfortable working as part of a global team.

- Capable of assessing projects, articulating risks, and developing project milestones.

- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.