Engineering Jobs in Texas

• 
  
• Analyze malfunctions and repair all two and four stroke engine driven equipment as required to ensure proper working condition for the customer
  
• Conduct preventive maintenance to avoid unnecessary repairs and down time
  
• Perform safety inspections on equipment
  
• Create work order and assess time and cost of repairs
  
• Maintains a clean and safe shop work environment
  
• Adhere to all governmental, company and equipment related safety requirements
  

• 
  
• A minimum of 2-5 years experience in diagnosing and repairing 2 and 4 stroke engines
  
• Rental experience preferred
  
• Good reading and comprehension skills
  
• Good customer service and communication skill
  
• The ability to consistently lift up to 50 pounds
  
• Must have your own tools
  
• Have a valid driver's license
  

• 
  
• Design / Engineering
  
  • 
    
  • Assists Senior Engineers in design documents for SCADA/Automation projects
    
    • 
      
    • Developing design document narratives
      
    • Perform requirements analysis
      
    • Understanding of Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field TestingMaintenance
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor's degree in electrical or mechanical engineering and 2-5 years field experience
  
• Associate degree in the electrical or mechanical field (add 3 years field experience)
  
• High school diploma (add 5 years field experience)
  
• 2-5 years' experience with designing and servicing controls systems for chiller plants, complex air distribution equipment, equipment installation, and testing
  
• Experience in reading mechanical and control schematics
  
• Experience in building automation systems (BAS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with test equipment and test equipment software
  
• Experience with networking design, configuration, and troubleshooting
  
• Experience with air handlers, chiller plant systems and data center CRAC units
  
• Ability to travel up to 80%
  
• MUST BE A US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, JCI, ALC, Distech, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

• 
  
• Preparing and maintaining multi-year headcount and non-compensation budget reports
  
• Maintaining working knowledge of significant investments and forecasting assumptions to support financial planning and analysis (FP&A)
  
• Participating in process improvement initiatives to increase efficiency and effectiveness of the FP&A process
  
• Responding to ad hoc requests and preparing analyses for the same
  
• Additional responsibilities will be based on the quarterly needs of the business and the candidate's specific skills
  

• 
  
• Bachelor's degree in accounting, Finance or other related business discipline
  
• At least 2 years of experience in Financial Planning and Analysis, preferably within a large, complex organization
  
• Advanced Excel skills
  
• Strong PowerPoint skills
  
• Strong analytical, problem-solving, and decision-making skills
  
• Strong coordination and organizational skills
  
• Ability to multi-task, meet tight deadlines and handle stressful situations
  
• Ability to work independently in a small team, exhibit initiative and be proactive
  
• Ability to organize and analyze large volumes of information
  
• Comfortable working in a fast-paced, high-energy environment
  

• 
  
• Knowledge of Zero-Based Budgeting
  
• Experience with FP&A tooling/software (e.g., Anaplan, SAP)
  
• Strong interpersonal and communication skills, oral as well as written
  
• Experience in a financial services environment
  

As the Manufacturing Manager, you will lead the charge in creating a work environment that prioritizes the safety of all employees. At the same time, you will play a critical role in driving operational efficiency and ensuring the consistent production of high-quality products that are delivered on time to customers within established cost targets.

The Manufacturing Manager reports to the Plant Director and is responsible for managing the manufacturing process of multiple value streams. The manufacturing manager will have a combination of Value Stream Managers and Production Supervisors reporting directly to them. They are tasked with effectively utilizing materials, labor, and equipment to meet the business plan while ensuring a safe work environment.

The Manufacturing Manager oversees the total production of the facility, including safety records, production requirements, defect levels, waste, and work order attainment. This role is critical in ensuring efficient and effective production processes to meet customer demands while staying within established cost targets.

Responsibilities and Expectations:

• Leads efforts to achieve a “Zero and Beyond” culture, eliminate all injuries, and positions the plant as a good community partner through our Corporate Social Responsibly efforts.
• Achieves daily, weekly, monthly production targets at minimal cost, maximum efficiency, and maximum quality.
• Works with Quality control to enhance in process controls to minimize scrap and meet customer high quality standards.
• Drives continuous improvement through appropriate coaching, training, and process improvement.
• Champions, with Value Stream Managers and Supervisors, operator led process control, lean manufacturing and six sigma concepts and programs.
• Knowledge and application of Tier Communication and 6-S.
• Administers company policies and practices.
• Works with materials management to optimize load, to minimize downtime, bottlenecks, unfavorable material mix and to reduce raw material, WIP and FG inventories.
• Works with Engineering to enhance process improvement resulting in achieving productivity goal.
• Works with Maintenance to ensure preventative maintenance programs match production requirements and maximize equipment efficiencies.
• Champions manufacturing objectives and possesses Project Management skills through leading and facilitating projects.
• Experience facilitating organizational change with good oral and verbal communication skills throughout all levels of the organization.
• Uses Continuous Improvement tools to troubleshoot recurring issues and eliminate root cause process failures.
• Analyzes KPI’s to prepare charts/records and initiate remedial action.
• Manages labor and employee relations in accordance with corporate policies ensuring pay rates, promotions, demotions, and termination of employment are applied consistently and with due process and diligence.
• Reviews material/facility usage.
• Performs other related duties as required.

QUALIFICATIONS

Required

• 7+ years of progressive manufacturing leadership experience.
• Proven success in leading cross-functional teams and driving operational improvements.
• Strong analytical, communication, and planning skills.
• Familiarity with Lean Manufacturing and Six Sigma principles.

Preferred

• Bachelor’s degree in engineering or related field.
• Experience in the power distribution industry a plus.” I.E. Former experience in wire & cable, power generation, utilities, transmission companies, etc.
• Fluency in a second language.
• Geographic flexibility.

WHAT YOU BRING

• A results-driven mindset with a passion for operational excellence.
• Ability to lead through influence, inspire teams, and manage complexity.
• Commitment to safety, sustainability, and community engagement.
• Strategic thinking with hands-on execution capability.

LEADERSHIP COMPETENCIES

• Strategic Agility
• Operational Excellence
• Talent Development
• Change Leadership
• Customer Centricity

WORK ENVIRONMENT & PHYSICAL DEMANDS

• Office-based role with regular interaction on the plant floor.
• Requires sitting, bending, kneeling, squatting, and lifting up to thirty pounds occasionally.
• Must thrive in a fast-paced, high-pressure environment and respond effectively to unexpected challenges.
• Occasional travel required.

WHY PRYSMIAN?

At Prysmian, you’ll be part of a global team that values innovation, sustainability, and diversity. We offer competitive compensation, career development opportunities, and the chance to make a real impact.

Ready to lead the future of manufacturing? Apply today and Make Your Mark at Prysmian.

Prysmian Group is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Who We Are:

Delta, founded in 1971, is a global leader in switching power supplies and thermal management products with a thriving portfolio of smart energy-saving systems and solutions in the fields of industrial automation, building automation, telecom power, data center infrastructure, EV charging, renewable energy, energy storage and display, to nurture the development of smart manufacturing and sustainable cities. As a world-class corporate citizen guided by its mission statement, “To provide innovative, clean and energy-efficient solutions for a better tomorrow,” Delta leverages its core competence in high-efficiency power electronics and its ESG-embedded business model to address key environmental issues, such as climate change. Delta serves customers through its sales offices, R&D centers and manufacturing facilities spread over close to 200 locations across five continents. Delta has 158 sales offices, 72 R&D centers and 48 manufacturing facilities worldwide.

Throughout its history, Delta has received various global awards and recognition for its business achievements, innovative technologies, and dedication to ESG. Since 2011, Delta has been listed on the DJSI World Index of Dow Jones Sustainability™ Indices for 11 consecutive years. In 2021, Delta was also recognized by CDP with leadership level ratings for its substantial contribution to climate change and water security issues and named Supplier Engagement Leader for its continuous development of a sustainable value chain.

What you would be doing:

Ensures manufacturing and assembly processes/procedures utilized by Contract Manufacturers meet product quality and reliability requirements.

Tracks ongoing quality and yield performance to drive improvement activities.

Evaluates new product designs for manufacturability.

Assists Contract Manufacturers with problem identification, root cause analysis, and corrective action identification, verification, and implementation.

Implements quality plans for rapidly transitioning products into manufacture.

Determines acceptability of product from subcontractors and internal operations.

Supports quality system development and implementation to applicable codes and standards such as ISO9001, etc.

Performs, documents and track results of internal audits.

Generates, evaluates and tracks corrective action requests.

Inspects and evaluates material and product quality according to internal process and procedures.

Assists in training of company personnel.

Interfaces with customers for quality activities

.

What we require (Skills and Background):

• Bachelor’s degree in engineering, Electronics or related discipline or equivalent desired
• Four to six years of previous quality assurance experience in the electronics or power industry required.
• Previous experience working with an ISO-9001 quality assurance program required
• Automotive background experience (IATF 16949 Automotive Quality Management System in particular) to support EV business.
• Core Quality and Engineering Tools (QMS, PPAP, APQP, FMEA, SPC, MSA, QCP, PMP)
• Quality metrics and driving metrics improvement (Yield, Cpk, GR&R, Scrap, MRB, DPPM
• Knowledge of statistical techniques and demonstrated ability to review and approve test plans, qualification reports, drawings, documents
• Quality Control Analysis; conducting tests and inspections of products, services, or processes to evaluate quality or performance.
• Monitoring/ Assessing performance of yourself, other individuals, or organizations to make improvements or take corrective action.
• Demonstrated advance proficiency with computer software to include MS Office (Word and Excel) and e-mail

Desired Skills:

Auditor or Lead Auditor Certification or Certified Quality Engineer is preferred.

ISO14001:2015 Environmental Management Systems, ISO 45001 Health, and Safety Management is a plus.

Delta SQMS (Smart Quality Management System) experience

Smart IQC

MES (Manufacturing Execution System)

What you will experience at Delta:

You will be joining one of the world’s leaders in technology as they grow their presences in North America. This role offers a competitive salary package, comprehensive benefits, and the opportunity to work with a dynamic team in a fast-paced and innovative environment. If you are a self-starter with a passion for technology and a commitment to customer satisfaction, this is the job for you.

The Assembly Department Supervisor will perform the following duties and has the following experience and skill set:

Supervision of Assembly Operations: Lead and manage the assembly team, ensuring that all injection molded parts are properly assembled,

inspected, and ready for painting or coating. Ensure that assembly operations run smoothly, efficiently, and in compliance with established production schedules.

Quality Control & Standards: Maintain and enforce strict quality control processes throughout the assembly line. Ensure all parts meet Toyoda Gosei’s and customer specifications before advancing to painting/coating stages. Address and resolve any quality concerns promptly,

in collaboration with the quality assurance team.

Workplace Safety: Prioritize and enforce a culture of safety within the assembly area. Ensure that safety standards, procedures, and regulations are followed by all team members at all times, and that assembly-related work areas are properly maintained to prevent accidents and injuries.

Continuous Improvement: Foster an environment of continuous improvement within the assembly department. Collaborate with other teams to identify areas for efficiency improvements, waste reduction, and process optimization.

Participate in Lean, Six Sigma, and other initiatives to enhance the performance of the assembly line.

Training & Development: Oversee the training and development of assembly team members, ensuring they are well-versed in product specifications, assembly processes, safety practices, and quality standards. Promote a culture of teamwork, accountability, and skill growth.

Collaboration with Other Departments: Work closely with production planning, engineering, quality control, and logistics teams to ensure seamless transitions between the assembly, painting/coating, and shipment processes. Coordinate with the shipping department to ensure timely and accurate delivery of completed parts to customers.

Performance Metrics: Monitor and report on key performance indicators (KPIs) related to assembly throughput, quality rates, downtime, and other relevant metrics. Take proactive measures to meet or exceed production targets and maintain a high level of operational efficiency.

Toyoda Gosei is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

MISSION

Responsible for the quality control function for the plant. Provides supervision for the Laboratory personnel to ensure quality standards are met in a safe and cost-effective manner. Oversees testing methodologies and provides feedback to various departments to increase production quality. Ensure that safe work practices are implemented and followed in compliance with Corporate Safety policies and State and Federal Regulations.

KEY ACCOUNTABILITIES

• Manage the quality control function of the plant to ensure the product meets specifications and customer satisfaction.
• Responsible for the direct supervision of employees and activities in the Quality Control Department.
• Determines laboratory strategy to align with plant and company goals and objectives for product quality.
• Serves as the plant technical expert on cement quality.
• Provides training and support to lab personnel in the performance of their duties.
• Ensures the accuracy of lab equipment including its utilization and results. Provides technical expertise to Maintain, calibrate and optimize the lab XRF to insure accurate and precise analysis of all materials.
• Develops new standards and upgrades calibrations as required.
• Monitors quality from the quarry through raw grinding, burning, cement grinding, and shipping areas of the plant. Uses statistical methods to track quality.
• Collaborates with Production Management to address concerns and make recommendations for improvements both proactively and reactively.
• Responsible for maintaining up to date quality control records.
• Responsible for preparing/signing letters of certification and mill test reports.
• Serve as the liaison with other departments in adjusting and setting internal set points for process operations to maximize product quality.
• Maintains up to date knowledge of lab equipment/systems.
• Maintains up to date knowledge of normative and standards.
• Drives project of possible/necessary new equipment in collaboration with Senior Quality Control Manager and HTC.
• Provides positive work environment for staff to maximize their personal and organizational potential.
• Ensure compliance requirements are met through organizational and procedural measures including implementation of Group guidelines, performing trainings, monitoring compliance etc.
• Proactively manage health & safety of employees to continuously improve the company's health & safety performance.
• Develops and improves products to increase customer satisfaction.
• Evaluates potential beneficial use of raw materials for possible use in cement manufacturing process.

MINIMUM REQUIREMENTS

• EDUCATION: Four-year degree in Chemistry, Engineering, or similar technical degree.
• EXPERIENCE: Minimum of five years’ experience in cement industry required quality control supervision desired.
• SPECIFIC KNOWLEDGE: Thorough understanding of cement chemistry, X-ray, and advanced chemical, physical and microscopic analytical and testing procedures; Knowledgeable in the following analytical methods: XRF, Spectrophotometry, wet chemical methods, physical testing, and clinker/cement microscopy. Knowledge of City, State & Federal statutes and regulations pertaining to Environmental compliance and Safety
• BUSINESS UDERSTANDING: In-depth knowledge of relevant ASTM specifications and procedures.
• OTHER: Excellent interpersonal, oral and written communications skills; Proficient computer skills and familiarity with Window Microsoft Office and SAP preferred; Ability to work as a member of a team in a Total Quality environment.

EEO: LWCC is proud to be an equal opportunity workplace employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, Veteran status, or other classes. We also consider qualified applicants regardless of criminal histories, consistent with legal requirements. If you have a disability or special need that requires accommodation, please let us know by completing our Accommodations form or by contacting our HR department.

Job description:

Telescent Inc. is a rapidly expanding high-technology company specializing in innovative network management systems. Based in Irvine California, our cutting-edge solutions leverage artificial intelligence and robotic systems to optimize data center operations worldwide, helping clients reduce costs and enhance efficiency through our patented technologies.

Position

We are seeking a dynamic Manufacturing Engineer to join our team and drive excellence in our manufacturing processes. In this role, you will be instrumental in designing, developing, and improving manufacturing systems for our advanced products. Your expertise will ensure seamless production workflows, enhance quality standards, and support continuous improvement initiatives across our manufacturing facility.

Responsibilities

• Develop and implement manufacturing processes for complex electronic and mechanical components, including plastics injection molding, CNC machining, and assembly line operations
• Utilize CAD software such as AutoCAD, SolidWorks, and Creo to design tooling, fixtures, and process layouts
• Program and troubleshoot programmable logic controllers (PLCs), robotics, CNC machines, and vision inspection systems to optimize automation
• Conduct root cause analysis on production issues to identify defects or inefficiencies and implement corrective actions
• Collaborate with process engineering teams to refine manufacturing workflows aligned with ISO 9001 standards and lean manufacturing principles
• Create detailed schematics, technical drawings, and process documentation for manufacturing equipment and industrial systems
• Support factory experience initiatives by applying mechanical knowledge to improve fabrication, tooling, welding, and assembly processes

Skills

• Strong project scheduling skills to manage multiple process improvement initiatives simultaneously
• Expertise in industrial engineering concepts including process engineering and factory layout design
• Proficiency in CAD tools such as AutoCAD, SolidWorks, Creo, and CAM programming for manufacturing applications
• Hands-on experience with robotics programming, vision inspection systems, CNC programming, and industrial equipment maintenance
• Knowledge of plastics injection molding techniques and tooling design for high-precision components
• Ability to perform root cause analysis using structured problem-solving methods
• Familiarity with schematics, GD&T (Geometric Dimensioning & Tolerancing), and industrial schematics for equipment troubleshooting
• Mechanical knowledge related to fabrication, welding, tooling development, and assembly line optimization
• Experience working within a manufacturing facility environment with a focus on continuous improvement practices
• Join us to be part of a forward-thinking team that values innovation, precision engineering, and operational excellence. Your contributions will directly impact the efficiency of our manufacturing processes while supporting the development of groundbreaking technologies used globally.

Benefits:

• 401(k)
• Dental insurance
• Health insurance
• Paid time off
• Vision insurance

Work Location: In person

Job Summary

We are seeking a skilled and dedicated Line Technician to join our dynamic manufacturing team. The ideal candidate will possess a strong mechanical knowledge and experience in a manufacturing facility or warehouse environment. As a Line Technician, you will play a crucial role in ensuring the efficient operation of our assembly line, utilizing various hand tools and power tools to fabricate and assemble products to meet quality standards.

Responsibilities

• Operate and maintain assembly line machinery and equipment to ensure smooth production flow.
• Utilize hand tools and power tools for the fabrication and assembly of components.
• Conduct regular inspections of equipment to identify any mechanical issues or maintenance needs.
• Collaborate with team members to troubleshoot production problems and implement effective solutions.
• Follow safety protocols and maintain a clean and organized work environment.
• Document production processes and report any discrepancies or quality concerns to management.
• Assist in training new employees on assembly line procedures and safety practices.
• Technicians are critical to ensuring the seamless operation of industrial facilities, providing essential services with minimal disruption to client operations. As a Hot Tap Technician, you'll perform specialized on-site services such as hot taps, line stops, and advanced techniques like Hi-Stops and Super Hi-Stops, all while maintaining the highest safety standards. If you're skilled, safety-conscious, and ready to take on challenging and rewarding work,
• Must be willing to travel 50% of the time.
• Must be able to travel the US

Experience

• Previous experience working in a manufacturing facility or warehouse setting is preferred.
• Proficiency in operating forklifts is a plus.
• Familiarity with assembly line processes and techniques.
• Strong mechanical knowledge with the ability to troubleshoot equipment issues effectively.
• Experience using various hand tools and power tools safely and efficiently.
• Ability to work collaboratively within a team environment while maintaining individual accountability for tasks.

If you are passionate about manufacturing, possess the required skills, and are eager to contribute to our team's success, we encourage you to apply for the Line Technician position today!

Job Type: Full-time

Pay: From $30.00 per hour

Expected hours: 40 to 60 per week

Benefits:

• 401(k) matching
• Dental insurance
• Health insurance
• Life insurance
• Paid time off
• Vision insurance

Schedule:

• 10 hour shift
• 8 hour shift

BE SURE TO APPLY ON OUR WEBSITE:

Job Summary Statement:

The Production Supervisor will be responsible for coordinating and directing the daily activities of production personnel to ensure efficient and safe production of solar modules. This role requires strong leadership skills, technical knowledge of manufacturing processes, and a commitment to quality and safety standards.

Essential Job Duties and Responsibilities:

• Supervises and leads a team of production operators and technicians to achieve production goals and objectives.
• Coordinates and prioritizes production activities to ensure on-time delivery of high-quality solar modules.
• Monitors production processes and equipment to ensure efficiency, quality, and adherence to safety standards.
• Trains and develops production personnel on manufacturing processes, procedures, and safety protocols.
• Implements and enforces company policies and procedures to maintain a safe and clean work environment.
• Collaborates with other departments such as Quality Assurance, Maintenance, and Engineering to resolve production issues and improve processes.
• Conducts regular performance evaluations and provide feedback to production team members.
• Maintains accurate production records and reports for management review.
• Drives continuous improvement initiatives to optimize production efficiency and reduce waste.
• Ensures compliance with regulatory requirements and standards related to solar module manufacturing.
• Other duties as assigned.

Minimum Requirements and Qualifications:

• Associate’s degree in related field or comparable experience.
• Proven experience (3 years) as a Production Supervisor or similar role, preferably in highly automated manufacturing or related industries.
• Strong leadership and interpersonal skills with the ability to motivate and develop a diverse team.
• Technical knowledge of manufacturing processes and equipment.
• Solid understanding of quality control principles and practices.
• Excellent problem-solving and decision-making abilities.
• Ability to work effectively in a fast-paced environment and prioritize tasks to meet deadlines.
• Proficiency in Microsoft Office Suite and manufacturing software systems.
• Knowledge of safety standards and regulations in manufacturing.

We are seeking a Senior Materials Engineer to join a rapidly growing advanced manufacturing company in the sustainable technology sector. This role will support the scale-up of high-performance, powder-based manufacturing processes and play a key role in the company’s next phase of technical growth.

What you’ll do

• Lead hands-on experimental development across powder processing, consolidation, forming, and thermal processing
• Design and execute experiments that translate into scalable manufacturing improvements
• Apply materials characterization techniques (SEM, XRD, particle size analysis, etc.) to drive process optimization
• Partner with production and R&D teams to scale processes from pilot to manufacturing
• Mentor technicians and engineers; develop SOPs and technical documentation

What we’re looking for

• M.S. or Ph.D. in Materials Science, Metallurgy, Mechanical Engineering, or related field
• 5+ years of experience in manufacturing or process development
• Strong background in powder-based materials processing
• Hands-on experience with pressing, sintering, or related thermal processes
• Ability to manage multiple projects in a fast-paced environment

This is a high-impact opportunity offering competitive compensation, strong benefits, and long-term growth while working on advanced manufacturing technologies of strategic importance.

We are seeking a Field Service Technician to provide on-site technical support for beverage manufacturing and packaging equipment at customer facilities nationwide. This role requires extensive travel (approximately 80% nationally) and hands-on expertise supporting installation, maintenance, troubleshooting, and repair of production equipment in fast-paced manufacturing environments.

The ideal candidate is mechanically and electrically skilled, customer-focused, and comfortable working independently while representing the company in the field.

Key Responsibilities

• Install, commission, troubleshoot, and service beverage manufacturing and packaging equipment at customer sites nationwide
• Diagnose and resolve mechanical, electrical, pneumatic, and control system issues to minimize downtime
• Perform preventive maintenance, upgrades, and retrofits on production equipment
• Support equipment startups, line optimizations, and changeovers
• Train customer operators and maintenance personnel on equipment operation and basic troubleshooting
• Accurately document service activities, findings, and recommendations
• Coordinate with engineering, sales, and customer support teams to resolve complex issues
• Maintain compliance with safety, quality, and sanitation standards in food and beverage environments

Required Qualifications

• Technical degree, certification, or equivalent hands-on experience in mechanical, electrical, or industrial maintenance
• 3+ years of field service or maintenance experience in manufacturing or packaging environments
• Strong mechanical and electrical troubleshooting skills
• Ability to travel nationally up to 80%, including overnight and weekend travel as required
• Ability to work independently and manage service schedules effectively
• Strong customer service and communication skills
• Valid driver’s license

Preferred Experience

• Experience supporting beverage, food, or packaging equipment (filling, capping, labeling, conveying, bottling, or canning systems)
• PLC troubleshooting experience (Allen-Bradley, Siemens, or similar)
• Experience with pneumatic and hydraulic systems
• Familiarity with GMP, food safety, and sanitation requirements
• Experience with OEM or integrator service organizations

Benefits

• Medical
• Dental
• Vision
• 401K
• Paid Holiday
• Paid Vacation
• Company Credit Card
• Bonus
• Per Diem
• Travel Pay

Job Title: I&C Design Engineer

Employment Type: Direct Hire

Location: Dallas, TX – (onsite 4 days/week, off every other Friday)

Salary: $110-130k

Benefits:

• Medical, Dental, Vision
• Life Insurance
• 401k
• PTO
• Holiday

Summary:

Akkodis is seeking an I&C Design Engineer for a DIRECT HIRE position in the Dallas, TX area. The desired candidate will have 5+ years of previous experience design for electrical instrument and controls. The I&C Engineer will be responsible for the design/development of industrial control systems including SCADA, PLC, and HMI systems. This is an excellent opportunity to support an exciting company in the electrical engineering industry.

***Remote 1 day/week, and off every other Friday***

Responsibilities:

• Site assessment and determination of needed instrumentation/SCADA upgrades
• Review of existing project documents – P&ID, system architecture, electrical drawings
• Coordination with clients on specific needs
• Document findings – Write assessment or report of existing conditions and recommendations
• Design/development of project drawings, including P&ID, system architecture, loop diagrams, installation details
• Create project specifications, including instrumentation, networking, control narrative strategies, software and hardware requirements for SCADA, PLC, and HMI systems
• Quality Control/Quality Assurance of project documents
• Attend/Conduct project meetings with client
• Review and comment on project submittals
• Coordination with Electrical Engineering Department

Required Skills:

• Bachelors Degree in an Engineering related field is required.
• A minimum of 5 years of relevant I&C experience is required.
• MUST HAVE PE or EIT and sitting for PE soon.
• Must have experience designing SCADA, PLC, and HMI systems.
• Strong background in AutoCAD is preferred.
• Registered Professional Engineer (PE) or Engineer-in-Training (EIT) in Texas is required.
• Experienced in the design of construction documents.
• Write Technical Memoranda based on site assessment.
• Drawing/PDF markups.
• Design relay schematics (motor control).
• PLC and SCADA HMI development and creation of PLC I/O lists
• Wide Area Network (WAN) design, including radio and cellular communications
• Fiber optic cable specification
• Control panel design
• VFD design/interface
• Physical and cybersecurity assessment and design preferred.
• A proactive, solution-oriented approach to challenges, with a focus on team success.
• Strong ability to foster and maintain professional, cross-functional relationships.

If you are interested in this I&C Engineer job, then please click apply through Akkodis.

Equal Opportunity Employer/Veterans/Disabled

To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Company will consider qualified applicants with arrest and conviction records.