Engineering Jobs in Stone Mountain Ga Flexible
205 positions found — Page 5
Performs manufacturing engineering tasks under minimal guidance that are varied and complex, which require troubleshooting and interpreting data. Develops and implements new test methods or manufacturing processes purpose of reducing costs and improving efficiency.
Job Responsibilities
- Performs a variety of engineering assignments to develop and implement production/processing methods and controls to meet quality standards in a cost efficient manner
- Provides liaison support between the engineering department and manufacturing
- Recommends and implements improvements and/or modifications for sequence of operations, equipment utilization and related matters
- Monitors assigned operations to assure compliance with current project schedules and approved quality standards
- Makes recommendations regarding the purchase or building of new equipment or modernization of existing production/processing equipment
- Recommends design modifications or process changes during design of new products
- Evaluates current technologies for cost reduction and for product and production improvement; check and approve drawings/designs, standard work as well as develop new systems
- Manages the install of new tools, fixtures, and equipment into the facility.
- Monitors and supports facility metrics for safety, quality, delivery and cost
- Performs other duties as assigned
Job Skills Requirements
- Extensive knowledge of engineering concepts, practices and procedures engineering standards and systems
- Comprehensive knowledge of manufacturing production/cell development
- Ability to read and interpret computer aided drawings and prints
- Ability to manage projects
- Strong interpersonal skills to interact with and motivate a diverse group of people
- Strong written and verbal communication skills
- Fluent in English and primary language used in area of responsibility and/or location
Education
Bachelor's Degree in Engineering or Related field
Experience Requirements
- Five years of engineering experience in a high-volume manufacturing environment
Physical & Environmental Requirements
Briggs & Stratton, headquartered in Milwaukee, Wisconsin, provides innovative products and diverse power solutions to help people get work done. Briggs & Stratton is the world’s largest producer of engines for outdoor power equipment, and is a leading designer, manufacturer and marketer of lithium-ion battery, standby generator, energy storage system, lawn and garden, turf care and job site products through its Briggs & Stratton®, Vanguard®, Ferris®, Simplicity®, Snapper®, Billy Goat®, Allmand®, SimpliPhi®, Branco® and Victa® brands. Briggs & Stratton products are designed, manufactured, marketed and serviced in more than 100 countries on six continents.
The Utility Management Consultant I, under guidance from a Senior Utility Management Consultant, will provide project management, strategic, and analytical support for Blue Cypress contracts. This person will be expected to support or conduct operational assessments, examine the effectiveness of information management tools and the data generated, design and conduct analyses to identify actionable insight, effectively communicate recommendations in writing and in presentations to a variety of audiences, design improvement strategies and initiatives, and support implementation of new business practices, information management tools, etc. This person will also support business development activities, such as networking and supporting pursuits. This person may also supervisor more junior staff, such as Analysts. They should thrive in a fast-paced environment and exemplify Blue Cypress’s core values: Collaborative, Strategic, and Improvement-Oriented.
Qualifications
To perform this job successfully, an individual must be able to perform each essential function mentioned satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or abilities required. Necessary accommodations will be provided in compliance with the Americans with Disabilities Act and state or local law.
The statements in this job description are intended to describe the essential nature and level of work being performed. They are not intended to list ALL responsibilities or qualifications of the job.
Responsibilities include:
- Manage small sized projects and successfully deliver these on time and on budget
- As a project manager, plan and designate project resources, prepare budgets, monitor progress, and keep clients and internal staff informed throughout the duration of the project
- Supervise, delegate, and/or oversee work of a small number of junior staff
- Maintain and grow client relationships and assess client needs with the goal of delivering tailored, cost effective, solutions
- Prepare and participate in business development activities such as networking, proposal writing, and presentations
- Provide specialized engineering consulting services in at least one area of expertise that may include: utility management / asset management, operations optimization/lean processes, maintenance management, technology selection/on-boarding, and/or data management/visualization
- Lead or participate in activities to perform business process/work method assessments, conduct project research/data collection, perform analysis, and generate reports
- Lead or support activities to plan, design, and implement operations and maintenance optimization strategies for water, wastewater, storm water utilities, and/or transportation infrastructure and airports
- Perform and/or direct analyses on large utility datasets such as: GIS, computerized maintenance management system (CMMS), Fats, Oil and Grease (FOG), condition inspection databases, capacity assessment/hydraulic modeling, etc. including dashboard development
- Perform data management practices assessments, determine gaps and opportunities, develop implementation plans to close gaps. Support implementation of plans
- Perform services on-site or off-site to support client staff in performing their day-to-day activities, such as planning/scheduling, condition assessment, capacity assessment, contractor management, etc.
- Travel to client sites as needed
- Perform other related duties as necessary or assigned
Minimum qualifications include:
- Degree in civil, environmental, or industrial engineering; environmental science/management, data analytics, or related discipline; or equivalent experience
- 4-10 years of experience in the industry
- Ability to utilize strong communication skills to create reports and deliver presentations for a wide variety of audiences from other professionals to the public
- Willingness to learn and apply emerging analytical technologies and management consulting best practices
- Strong interest in local government and public agency operations and management, utility management, and asset management consulting services
- Strong written and verbal communication skills
- Enthusiasm, professionalism, creativity, and strong interpersonal skills
- Ability to receive and act upon constructive feedback
- Outstanding critical thinking skills
- Must be detail-oriented and able to prioritize, multitask, and organize complex projects
- Valid driver’s license and excellent driving record
- Ability to periodically travel to utilities across the region or country
Preferred qualifications include:
- Planning and implementation of asset management strategies for utilities
- Planning and implementation of maintenance strategies for utilities
- Experience with planning and implementation of infrastructure inspection and condition assessment programs and/or capacity assessment programs
- Planning and implementation of capital renewal strategies for utilities
- Design and implementation of information management/decision support systems
- Database and GIS analysis experience
- Experience working for or assisting local government and utility organizations to develop and implement strategies to improve their performance and generate higher levels of service
- Licensed professional engineer (PE) in State of Georgia
- Master’s degree in public administration, business administration, environmental science, or other technical graduate science degree
Required software proficiencies include:
- Microsoft Office applications (Excel, Word, Outlook, PowerPoint)
- Must be proficient in creating pivot tables, pivot charts, writing formulas (e.g., performing v-lookups) within Microsoft Excel
Preferred software proficiencies include:
- Microsoft specialized applications (Access, Excel, Power Query, PowerPivot, Visio, Project)
- Writing queries and joining tables within Microsoft Access or similar SQL environment
- ESRI ArcGIS ArcMap and/or Pro and various extensions such as Spatial Analyst
- Esri Apps including Workforce, Survey123, Collector, etc.
- Understanding of industry software such as Azteca Cityworks, Central Square’s Lucity, Infor/Hansen, IBM Maximo, Granite, Linko, etc.
- Understanding of data warehouse and business intelligence tools such as Tableau, Qlik, Power BI, etc.
Supervisory Responsibilities
This position is responsible for supervising direct reports.
Travel
There is potential travel up to 25%, consisting primarily of travel within the local Metropolitan Area (e.g. driving to client sites, attending meetings/conferences, etc.) with some travel that may be required out of state.
Work Authorization
Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor or take over sponsorship of an employment visa at this time.
Work Environment
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
This is a hybrid position (in office/remote). We offer a telecommute option to work once a week from the office, with a minimum of 6 times per month at the office, and the remainder of the time to work from home. If desired, employees may work up to every day in the office instead of at home. During onboarding, new hires may be required to work more frequently in-person at the office with their supervisor. While in the office, the employee will normally work in a temperature-controlled office environment, with frequent exposure to electronic office equipment. Smoking and vaping shall be prohibited in all enclosed areas within the workplace.
Physical Demands
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
• Prolonged periods sitting at a desk and working on a computer
• Must be able to lift up to 15 pounds at times
Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.
Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.
What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.
Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.
Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.
Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.
Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.
Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.
Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.
Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.
Specific options depend on the Sailor's status, training, and current Navy policy.
Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.
Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.
Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.
Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.
Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.
It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.
Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.
This role supports the full software development lifecycle, including front-end development, back-end services, database design, system integration, deployment, and ongoing operational support.
The engineer collaborates with cross-functional teams to deliver reliable, integrated technology solutions aligned with business needs.
Candidates will be considered at Level III, IV, or V depending on experience and demonstrated technical leadership.
Key Responsibilities Full Stack Development • Design, develop, test, and maintain enterprise-grade applications across the technology stack.
• Build modern, responsive, and user-friendly interfaces using React or similar frameworks.
• Develop backend services, RESTful APIs, and microservices using Java (Spring Boot), Node.js, and/or Python.
• Ensure applications are optimized for performance, scalability, reliability, and maintainability.
Architecture & Integration • Contribute to system design and architectural decisions.
• Develop and maintain integrations between enterprise platforms to ensure data accuracy and operational efficiency.
• Participate in API design, microservices architecture, and modernization initiatives.
Cloud & DevOps • Deploy and support applications in Azure environment.
• Implement and maintain CI/CD pipelines to support automated builds, testing, and deployments.
• Utilize containerization and orchestration tools such as Docker and Kubernetes.
• Support infrastructure-as-code and DevOps best practices.
Operational Excellence & Support • Monitor system performance and troubleshoot issues across the stack.
• Perform root cause analysis and implement long-term solutions.
• Plan and execute upgrades, enhancements, and system optimizations.
• Provide visibility into application health and performance metrics.
Collaboration & Leadership • Partner with business stakeholders, analysts, and technical teams to translate requirements into scalable solutions.
• Participate in Agile/Scrum ceremonies and iterative development processes.
• Mentor junior engineers and contribute to knowledge sharing.
• Lead technical initiatives or projects based on level and experience.
Compliance & Security • Ensure adherence to corporate policies and regulatory standards (including RUS, OSHA, SOX, NERC, FERC, and ITS requirements).
• Apply secure coding practices and support application and infrastructure security initiatives.
• Promote a culture of compliance, accountability, and continuous improvement.
Qualifications Education Bachelor's degree in Computer Science, Engineering, Information Systems, or a related technical field.
Experience by Level Level III • 4+ years of full stack development experience.
• Independently manages development tasks and production support.
• Leads smaller initiatives and contributes to team projects.
Level IV • 6+ years of experience including application architecture and system optimization.
• Leads development projects and provides technical direction.
• Collaborates cross-functionally to deliver integrated enterprise solutions.
Level V • 8+ years of experience architecting and managing enterprise-scale applications.
• Oversees major technical initiatives.
• Provides strategic technical leadership and drives innovation across IT functions.
Technical Expertise • Java (Spring Boot), React.js or similar framework, Python, Node.js • Microservices architecture and API management • MSSQL, Oracle, MongoDB • Azure or AWS/GCP (cloud-native architectures preferred) • CI/CD pipelines, GitHub • Docker, Kubernetes, Terraform • Secure coding practices (OAuth, JWT, SSL) • Observability, logging, and monitoring tools • Familiarity of ML/AI technologies Key Competencies • Strong analytical and troubleshooting skills • Excellent written and verbal communication abilities • Customer-focused mindset • Ability to work independently and collaboratively • Commitment to continuous learning and technical growth Why Join OPC, GTC, and GSOC? • Work on impactful, mission-critical enterprise systems • Contribute to modernization and cloud transformation initiatives • Grow your technical leadership capabilities • Be part of a collaborative, innovation-driven IT organization
Georgia System Operations Corporation (GSOC) is at the forefront of this evolution-integrating renewable energy capacity, managing datacenter growth, preparing for widespread EV adoption, and modernizing the grid with digital technologies.
This creates extraordinary opportunities for engineers who want to help shape the future of energy delivery.
This role sits at the intersection of traditional power system operations and cutting-edge data analytics, where your work directly contributes to enhancing grid reliability and economic performance for GSOC's 38 member cooperatives.
You'll tackle complex challenges such as optimizing dispatch across diverse generation portfolios including solar, batteries and pumped storage, predicting and managing transmission constraints, and building the analytical frameworks needed to accommodate new datacenter loads and distributed energy resources.
This role is responsible for: • Developing advanced grid optimization models including solar production forecasting, N-1 contingency analysis, transmission congestion prediction, and economic dispatch optimization across generation and storage resources • Creating operational intelligence platforms that provide visibility into grid performance, member load patterns, production costs, and system economics through automated reporting and data visualization • Building analytical frameworks for the evolving grid to accommodate high renewable penetration, large datacenter loads, and distributed energy resource integration • Collaborating across the organization with operations planning, operations engineering, transmission planning, member services, and regional entities while representing GSOC in industry committees and technology working groups Individuals in this role will gain comprehensive exposure to electric power system analysis, transmission modeling, generation optimization, interregional power flows, and industry coordination practices while working with state-of-the-art analytical tools and platforms.
JOB DUTIES/ESSENTIAL FUNCTIONS: • Develop and maintain models for grid optimization including solar production forecasting, N-1 contingency analysis using full network power flow models, transmission congestion prediction, and pumped storage dispatch optimization • Coordinate with OPC to integrate generation assets with member-owned resources in dispatch optimization models • Create real-time visibility platforms for grid operations, member load patterns, production costs, and system economic performance • Develop automated reporting systems tracking operational KPIs, member cost allocation, and economic optimization results • Implement data visualization tools supporting both technical operations and executive decision making • Create automated single system dispatch optimization integrating fuel prices, generation and transmission constraints, and resource portfolios • Support DER integration through advanced analytics • Create modeling frameworks accommodating renewable penetration and large datacenter load growth • Collaborate with operations planning, operations engineering, transmission planning, and member services teams • Participating in industry working groups and technology committees • Support regulatory compliance and create technical documentation • Perform technical activities including operational model development/validation, steady-state load flow, stability, power quality, and other power system studies, as required, applicable to the operational planning horizon.
Analysis will include the evaluation of scheduled transmission and generation outages, short-term transmission service, and seasonal transmission variations in support of reliable transmission system operations.
• Develop presentations that support the Corporation regarding transmission interests for use with Senior Management and other utilities.
• Assist in the development of goals and milestones for the GSOC Operations Planning Department.
• Attend required training classes.
Become familiar with the corporation's policies and procedures.
REQUIRED QUALIFICATIONS Education: B.S.
in Electrical Engineering, Computer Science, Data Science, or related technical field with emphasis in power systems.
Experience: • E-IV: Six years (four years with P.E.
License) in Power Systems with at least three years in operational planning/utility operations/energy markets along with one year of data science project work.
• E-V: Eight Years (six years with P.E.
License) in Power Systems with at least four years in operational planning/utility operations/energy markets including two years in data science project work.
• E-VI: Ten Years (eight years with P.E.
License) in Power Systems with at least six years in operational planning/utility operations/energy markets including two years in data science project work along with demonstrated leadership experience.
Equivalent Education & Experience: Master's degree in electrical engineering or related technical field and: • E-IV: Five years (three years with P.E.
License) in Power Systems with at least three years in operational planning/utility operations/energy markets along with one year of data science project work • E-V: Seven Years (four years with P.E.
License) in Power Systems with at least four years in operational planning/utility operations/energy markets including two years in data science project work.
• E-VI: Nine Years (seven years with P.E.
License) in Power Systems with at least six years in operational planning/utility operations/energy markets including two years in data science project work along with demonstrated leadership experience.
Licenses, Certifications and/or Registrations: EIT, PE, & PMP are applicable but not required.
Special Skills: Power Systems Knowledge • Understanding electric utility operations, power flow analysis, N-1 contingency analysis.
• Experience with load forecasting, generation dispatch, resource adequacy planning.
• Familiarity with utility data systems (SCADA, EMS, DMS) and power flow software (PSS/E, PSS/O, PowerWorld, or TARA).
Technical Programming & Data Science • Proficiency in Python, SQL, and Excel.
• Experience with Databricks platform and PowerBI are a plus.
Communication & Project Management • Strong written and verbal communication skills for technical and non-technical audiences.
• Ability to manage multiple concurrent projects and coordinate cross-functional teams.
• Experience translating complex analytical results into actionable business insights.
• The performance of power system modeling and analysis in assigned areas using industry standard software.
• The development and coordination of transmission solutions that promote system reliability and resiliency.
• The development of technical reports, capital project scopes and justifications, and other procedural documentation.
• Participation in industry committees and transmission planning collaboratives with other electric entities as assigned.
Bhagyashree Yewle, Principal Lead Recruiter - YOH SPG
ODI Developer - Hybrid Onsite in Boston MA - USC OR GC ONLY (No Visas)
- Location: Boston, MA
- Hybrid: 3 days on site
- Potential Convert: Yes, USC/GC ONLY no exceptions. WILL NOT SPONSOR
- ETL/ELT
- ODI
- PL/SQL coding
- 7 years’ experience
- Knowledge on how to be an admin side of things (not day to day but is able to do that)
- Scripting – Python & Unix Scripting
Seeking a highly skilled and experienced Sr. ODI Developer to join our Private Banking Systems team. The ideal candidate will possess expertise in a range of technologies, including ODI (Oracle Data Integrator), Oracle Data Warehouse, Linux, Python scripting, and have a deep understanding of the Banking domain is a big plus. As a Data Engineer, you will play a pivotal role in designing, developing, and maintaining data solutions.
Key Responsibilities:
- Build ODI mappings/interfaces, packages, procedures, scenarios, topology configuration, ODI Agent and load plans to integrate data from multiple enterprise systems.
- Expertise in building Pl/SQL queries, procedures, data loading process, ensuring high-performance and scalability to meet the evolving data needs of the various applications.
- Design, develop, and maintain ETL/ELT pipelines using Oracle Data Integrator (ODI).
- Collaborate effectively with cross-functional teams, including other data engineers, DBA group, analysts, and business stakeholders, to understand data requirements and deliver solutions.
- Monitor and troubleshoot RMJ jobs, ODI workflows, sessions, agents, and data pipelines on Linux environments.
- Perform root cause analysis for failures related to ODI workflows, RMJ jobs, network connectivity, API integrations, and file transfers.
- Optimize ETL workflows to improve reliability, performance, and scalability.
- Use scripting and automation tools to support data processing and operational workflows.
- Work in Linux/Unix environments, using command-line tools and shell scripts for job automation and troubleshooting.
- Maintain comprehensive documentation of data processes, configurations, and best practices.
- Participate in walk-throughs which review program specifications, source code, and all technical supporting documentation, including screens/reports. Provide feedback in accordance with team standards and guidelines.
- Participate in implementation of changes, enhancements, and newly developed programs.
- Conduct technical research and provide recommendations, develop proofs of concept or prototypes, contributing to technical design of applications.
- Helping to identify coding patterns and anti-patterns and enforce implementation of the patterns through code reviews.
- Quickly resolving issues encountered by business lines in the production environment, maintaining a helpful, "high touch" approach to working with business users, performing root cause analysis, technology evaluation, and performance tuning.
Desired Qualifications:
- Degree in Computer Science, Engineering or related technical area
- 7+ years of extensive hands-on experience in ODI, Oracle Datawarehouse, Oracle PL/SQL, Linux, Python scripting, and ODI admin module (ODI Agent setup, logs configuration, certificate installation).
- Must have experience in building Pl/SQL queries for Oracle Server (incl. stored procedures, functions…) and must understand basic principles of data modeling
- Excellent collaborative and communication skills, particularly in high-stress situations
- Experience with scripting Python and Linux scripting, CLE, networking fundamentals (API, IP/ports, SFTP/FTP connectivity)
- High proficiency in development practices: unit testing, Continuous Integration (CI/CD), refactoring, clean code
- Experience with Bitbucket/GIT source control management
- Problem solving skills, able to determine upcoming risks & issues and address them accordingly.
- Ability to interpret and troubleshoot applications using logs.
- Pro-active approach and good communication skills.
- Experience with agile methodologies (Scrum, Kanban) and tools (Jira)
- Private Banking domain experience.
- Working experience in a financial service industry
- Financial application knowledge like FIS AddVantage, CRD, CRM Pivotal.
- Experience with Apache Airflow for workflow orchestration.
- Knowledge of dbt (Data Build Tool) for modern data transformations.
- Exposure to cloud data platforms or hybrid data architectures.
Key Competencies:
- Strong analytical and problem-solving skills
- Ability to work with large-scale enterprise data environments
- Excellent collaboration and communication skills
- Ability to manage multiple priorities in a fast-paced environment
- Commitment to continuous learning and technology innovation
Estimated Min Rate: $55.00
Estimated Max Rate: $72.00
What’s In It for You?
We welcome you to be a part of the largest and legendary global staffing companies to meet your career aspirations. Yoh’s network of client companies has been employing professionals like you for over 65 years in the U.S., UK and Canada. Join Yoh’s extensive talent community that will provide you with access to Yoh’s vast network of opportunities and gain access to this exclusive opportunity available to you. Benefit eligibility is in accordance with applicable laws and client requirements. Benefits include:
- Medical, Prescription, Dental & Vision Benefits (for employees working 20+ hours per week)
- Health Savings Account (HSA) (for employees working 20+ hours per week)
- Life & Disability Insurance (for employees working 20+ hours per week)
- MetLife Voluntary Benefits
- Employee Assistance Program (EAP)
- 401K Retirement Savings Plan
- Direct Deposit & weekly epayroll
- Referral Bonus Programs
- Certification and training opportunities
Note: Any pay ranges displayed are estimations. Actual pay is determined by an applicant's experience, technical expertise, and other qualifications as listed in the job description. All qualified applicants are welcome to apply.
Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
Visit to contact us if you are an individual with a disability and require accommodation in the application process.
For California applicants, qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. All of the material job duties described in this posting are job duties for which a criminal history may have a direct, adverse, and negative relationship potentially resulting in the withdrawal of a conditional offer of employment.
It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.
By applying and submitting your resume, you authorize Yoh to review and reformat your resume to meet Yoh’s hiring clients’ preferences. To learn more about Yoh’s privacy practices, please see our Candidate Privacy Notice: working/work at home options are available for this role.
Readily Available Interim Customer Support Lead | VC-Backed B2B Healthtech SaaS | Boston (Hybrid)
The Client
This client is an AI-powered healthtech startup born out of a multi-year collaboration between leading academic medical centers and top-tier engineering institutions in Europe. This business has developed patented algorithms and a proprietary clinical database to help practitioners improve ultrasound screening accuracy, reduce diagnostic errors, and optimize care pathways for expectant mothers. With a clear mission to expand access to high-quality women's and children's health outcomes through technology, they are now scaling rapidly across the United States; partnering with major clinical networks and onboarding new health system clients at an accelerating pace.
The Role
This is an opportunity to own and build a support function at a company experiencing hypergrowth in the US market. Reporting to the Director of Operations, this role is for someone who sees a blank slate as an opportunity. The customer base is scaling rapidly and this position will be responsible for building the support function that grows with it. The right candidate will be hands-on, close to the product and customers before building out the systems, tooling, and team capable of sustaining growth without compromising the experience
Responsibilities
- Handle tickets and calls directly to build deep product knowledge and earn customer trust
- Design and implement the core support ticket infrastructure: SLAs, escalation paths, and cross-functional workflows with Engineering and Product
- Optimize the CRM/ticketing environment (automations, reporting, routing) and build out a self-serve knowledge base including FAQs and troubleshooting guides
- Serve as the voice of the customer, translating support patterns and user feedback into actionable product insights
- Define and track key operational KPIs and build automations to drive ongoing efficiency
- Champion team autonomy and maintain quality standards throughout a period of significant scale
What We Need to See (Essential)
- 3-5 years of B2B SaaS experience in Technical Support, Customer Support, or Operations
- Experience in implementing modern support/ticketing platforms (e.g. Zendesk, Pylon or similar)
- Proficiency in maintaining & utilizing ticketing CRMs
- Demonstrated ability to thrive in hypergrowth environments and build processes from zero
- Comfort working across time zones (specifically West Coast)
- Genuine alignment with the company's mission in women's and children's health
What We’d Like to See (Bonus)
- Experience in a healthcare or regulated SaaS environment
- Familiarity with building or scaling a support function at a Series A-C stage company
- Experience with CRM automation and reporting
Location: Hybrid
Package: $60-80 per hour
Duration: 4 months
Remote working/work at home options are available for this role.
The company is a recognized leader in the commercial faade industry, specializing in innovative glazing and curtain wall systems across North America. Known for executing complex, high-value projects with precision and professionalism, they are expanding their national project management team to keep pace with growing demand. Their approach blends craftsmanship with cutting-edge technologyand they're seeking forward-thinking professionals who can lead from anywhere.
The company is seeking a Remote Project Manager with deep experience in commercial glazing or curtain wall systems. This role is ideal for someone who thrives on ownership, excels at remote coordination, and can lead multimillion-dollar faade projects from preconstruction through closeout.
You'll manage every phase of the project lifecycleleveraging digital tools, strong communication, and a process-driven mindset to deliver on time, on budget, and on spec. While you won't be on site every day, your presence will be felt through structured collaboration, proactive planning, and a firm grasp of what it takes to keep complex installations moving forward.
Minimum three years of experience managing glazing or curtain wall projects.
Demonstrated success managing commercial construction projects remotely.
Expertise in architectural, structural, and fabrication drawings.
Strong knowledge of curtain wall, storefront, ACM, or unitized faade systems.
Comfortable leading project updates, vendor negotiations, and client coordination remotely.
Proven ability to manage contracts, track costs, and mitigate risk.
Degree in Construction Management, Engineering, or a related field (or equivalent experience).
Familiarity with Bluebeam, Procore, AutoCAD, or PM platforms.
Existing network of glazing vendors and subcontractors.
Fully remote work with flexible hours.
Collaborative, experienced, and high-performing team.
Opportunities for professional growth and leadership.
Impactful, high-visibility projects across the U.S.
Competitive compensation and benefits package.
Culture that values clarity, accountability, and trust.
Remote working/work at home options are available for this role.
The Clinical Affairs Manager will provide clinical expertise, insight, and support to clinical end-users, clinical sales specialists, sales team, Regulatory, Engineering, marketing, and other corporate departments on safe and effective use of the Teleflex Medical product portfolio with primary emphasis on the Coronary/Structural Heart franchise. This position will support the appropriate clinical application of the Coronary/Structural Heart franchise via didactic, web-based, and teleconference education, and understanding of these products and best practices. Clinical support will be provided to physicians, nurses, techs, etc., to include support for live cases/proctorships in the therapeutic areas related to focus products. The Clinical Affairs Manager will drive innovation by identifying product attributes necessary to expand into new markets, or capitalize on new clinical applications; identify new, clinically driven product and market opportunities; and perform other related duties as required. Provide support during society engagements, facilitating the exchange of scientific information in close collaboration with CMA leadership and the broader clinical affairs interventional team.
Customer Experience Representing Teleflex in a customer-facing position is a tremendous responsibility and opportunity. All CMA colleagues are expected to perform with the highest levels of professionalism, service, and ethics to strengthen the Teleflex brand and relationship with our customers. Continuous Improvement - Demonstrates initiative and critical thinking to identify, prioritize process and performance gaps. Develops solutions to deliver improved results. Exemplifies continuous improvement thought processes and focus. Culture and Values Exemplifies Teleflex values and ensures a fair, open, and productive climate that is engaging, ethical, and legally compliant. Strives to work effectively across boundaries in a complex matrix environment. Identify and support BU field efforts for the Coronary/Structural Heart franchise through clinical and educational customer needs assessment, product and procedural training, live case coverage, and assist with customer follow-up for ongoing clinical support as needed. Maintain and develop expertise on the Coronary/Structural Heart Interventional product portfolio related to the specific clinical specialty area and expertise. Identify and expand the customer base through professional networking, consultation related to best practices and the appropriate clinical use of Teleflex products, and timely professional follow-up. Support Coronary/Structural Heart educational programs with aligned educational goals and needs of the Interventional Business Unit. Support scientific exchanges of information with medical societies. Pre-conference & in-booth educational programs, meetings with scientific committees, education grant support, and research submissions (in collaboration with the Global Research & Scientific Services team). Off-label support for Teleflex products in accordance with Teleflex policy & local legal regulations
Manage utilization of HCPs in accordance with Teleflex IPPs. Coordinate efforts between cross-functional partners, including Medical Affairs, Global Research & Scientific Services, marketing, and R&D. Coordinate, participate, and manage educational, scientific activities at identified local, regional, and national trade shows/exhibitions. Serve as part of the CMA clinical expert team on product applications and troubleshooting when interfacing with SBU Leadership, Clinical Sales Specialists, and Teleflex team members. Participate as a clinical expert on project teams, committees, and in meetings with various corporate departments to provide guidance as to the clinical perspectives for the Coronary/Structural franchise. Build and support infrastructure for speaker programs supporting Teleflex Academy, webinars, training content, and programs. Coordinate and participate in content development and review of education material as needed by IA BU or CMA. Manage all business-associated administrative tasks and responsibilities to support job-related activities, to include strict adherence to the Teleflex Medical T&E policies and procedures, timely filing of required and/or requested reports, and documentation of activities via approved documents and forms. Adhere to applicable Teleflex IPPs, Teleflex Code of Ethics, and all Company policies, rules, procedures, and housekeeping standards.
Bachelor's degree is required, preferably in clinical, biology, health sciences, or engineering. Procedural experience within Interventional Cardiology and/or Structural Heart Possess a minimum of five years' clinical exposure in the medical field in the Cardiology environment. Medical Device industry supporting Clinical and Medical Affairs, strongly preferred. Proficient in Microsoft Word, Excel, and PowerPoint required; SalesForce experience preferred.
Remote working/work at home options are available for this role.
WHO WE ARE
Delta Engineers, Architects, & Surveyors (Delta) is a multidisciplinary AEC firm founded in upstate New York in 1976. Along with our corporate headquarters located near the intersection of Interstates 81, 86 and 88, Delta has additional offices across Central New York and Chevy Chase, MD, together with remote team members located across the US. We deliver engineering and architectural design services for multiple market sectors along with providing environmental, survey, landscape architecture, and ecological services to public and private clients located throughout the continental US. Delta team members take advantage of terrific opportunities to advance professionally in a supportive team-oriented culture while enjoying generous compensation and benefits package.
WHO WE NEED
We are seeking a versatile and team-oriented Structural Project Engineer in our Structural Team, ideally located in the Syracuse or Albany, NY area, or at our Endwell, NY office. Candidates located outside the designated office locations may qualify for full remote work, subject to company policy. The ideal candidate should have a Bachelor's Degree in Civil / Structural Engineering, with a minimum of 6 years of relevant experience. A PE is also required. Experience should include structural analysis, design, and detailing for concrete, steel, and aluminum structures. Experience with cable design is preferred.
The primary duties associated with this position include:
- The candidate should be proficient with the International Building Code (IBC); ASCE-7; ACI 318; ADM-2020; and AISC.
- Performing challenging 3-dimensional structural analyses and designs for a wide variety of clients using various state-of-the-art design software, including RISA 3D, SAP, RAM, and RISA Foundation.
- Responsible for serving as lead project engineer, i.e., taking responsibility for developing design, preparing detailed structural drawings using AutoCAD and REVIT, and specifications. This includes coordinating the work of junior team members and amongst other trades.
- Solving engineering problems using experience, judgment, and education and knowing when to ask for assistance when required.
- Write and review related reports for the services provided.
- Scoping projects and assisting project managers with proposal creation.
- Serving as a Quality Control reviewer for the designs of team members.
- Assisting the Team Leader in initiating, developing, and implementing continuous team improvement initiatives.
- Supporting structural work in our building projects within the Structural Facilities Group as workload warrants.
- Attending client meetings/presentations in the daytime or evenings.
- Communicating with client representatives, contractors, and suppliers.
- Participating in site visits/inspections/documentation during construction.
- Work on a variety of projects including schools, industrial facilities, commercial buildings, and governmental projects.
- This position requires an individual that has strong technical abilities with good organizational and communication skills, and the ability to work in a fast-paced market.
Additional duties will include preparing structural designs; prepare structural design summaries and detailed drawings using AutoCAD and REVIT; consider alternate designs and value engineering; and meeting scheduled project deadlines.
Delta is driven to exceed our clients' expectations on every project. Accordingly, the successful applicant for this position must be willing to occasionally work adjusted hours/overtime.
WHAT WE OFFER
Hiring Salary Range: $80,000-$110,000 (Salary to be determined by the applicant's education, experience, knowledge, skills, and abilities along with an internal equity and alignment with market area data.)
The following are a few of the benefits that we offer:
- Paid Holidays, Vacation, Sick time
- Health and Dental Insurance
- Optional Vision, LTD and Term Life Insurance
- Enhanced Short Term Disability
- 401K Retirement Plan
- Tuition Assistance Program
- Professional Licensing Reimbursement
- Recruitment Bonus Program
We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.
Remote working/work at home options are available for this role.
