Engineering Jobs in Santa Clara Remote
494 positions found — Page 27
We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.
As a Radar Hardware Design Engineer, you will be a part of our Radar Engineering team. The Radar Engineering team is comprised of a small cross-functional team of motivated and experienced engineers; we're responsible for designing, building, and testing cutting-edge phased array radar systems from concept to certified product. We enjoy a culture of sharing information and collaboration. Phased array radar systems have historically been reserved for specialized applications, but we're making this technology affordable to enable Detect and Avoid for widespread commercial applications. This role will focus on new advanced operational modes. The passion for revolutionary technology to make aviation safer motivates us to come in every day.
Responsibilities
In your role as a Radar Design Engineer, you will be responsible for designing digital and analog circuits for our next-generation Radar system. You will be involved in all phases of development, from conception to production, tracing system-level requirements through to circuit-level design. You will drive the design and layout of a multi-processor with an FPGA on chip using DDR 4 memory, as well as designing switching and linear power supplies. The high-speed digital design is complemented by high-frequency analog and RF design up to 12GHz. You will own the schematic, layout, artwork generation and bring-up of hardware. You will be collaborating with the cross-functional teams, including mechanical and system engineering. You will be responsible for the certification of your design to DO-160, DO-254 design assurance and FCC certification. You will support radar system integration and testing in the engineering lab and on the aircraft.
Basic Success Criteria
Electrical Engineering fundamentals, typically gained through a Bachelor's Degree of Science or Engineering in Mechanical, Electrical, Aerospace, or a related discipline
5+ years of professional hands-on experience with high-speed digital circuits, linear and switching power regulator circuits, PLL's, VGA, mixers etc.
Ability to use Circuit simulators, Altium schematic capture and layout, and SPICE simulation software
Ability to troubleshoot, find root cause, and resolve issues
Experienced in using oscilloscopes, logic analyzers, spectrum analyzers and Vector Network Analyzers
Preferred Criteria
Advanced Degree of Science or Electrical Engineering
Experience developing system architectures and managing requirements for certification of Avionics
Creative problem solver that can bring multiple disciplines together, with the ability to assess risk and make design and development decisions without all available data
Experience integrating and troubleshooting various electronic sensors and components
RF circuit design experience up to 12GHz
DO-160 and DO-254 hardware design assurance experience
This position will be located at our facility in Mountain View, California.
Must be willing to travel 10% of the time.
The estimated salary range for this position is $190,000 to $250,000/annual salary + cash and stock option awards + benefits. At Reliable Robotics, we strive to provide competitive and rewarding compensation based on experience and expertise, as well as market conditions, location, and pay equity.
In addition to base compensation, Reliable Robotics offers stock options, employee medical, 401k contribution, great co-workers and a casual work environment.
This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.
All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.
At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.
If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to
Compensation Range: $190K - $250K
Apply for this JobWe're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.
As an Electrical Systems Engineer, you will be a part of our Vehicle Design and Integration team. Your work will help bring together mechanical, electrical, navigation, control, and safety requirements to produce complex electrical systems that are key to the success of our efforts to automate aviation. You'll collaborate with a broad set of teams to develop a system architecture and incorporate requirements across the hardware/software stack.
Responsibilities
In your role as an Electrical Systems Engineer, you will be responsible for refining and implementing our Avionics system architecture and driving its physical implementation. You will drive the system-level design, testing, and integration of avionics hardware, including computing, sensing, actuation, communication, power, and display systems. You will work across engineering teams and will implement an electrical system design that meets system-level and certification requirements. You will be the owner of multiple components (IMUs, air data computers, batteries) and will be responsible for how they are installed in the aircraft, verified, and certified at the aircraft level.
Basic Success Criteria
Electrical Engineering fundamentals, typically gained through a Bachelor's Degree of Science or Engineering in Electrical, Mechanical, Aerospace, or related discipline
Hands-on experience with electrical system development, integration, or testing
Ability to work within a team, including strong written and verbal communication skills
Ability to troubleshoot, find root cause, and resolve issues in a safety critical environment
Preferred Criteria
Advanced Degree of Science or Engineering in Electrical, Mechanical, Aerospace, or related discipline
Experience integrating and troubleshooting complex electronic sensors, actuators, computing, and wiring into complex vehicle-level systems.
Creative problem solver that can bring multiple disciplines together with the ability to assess risk and make design and development decisions without all available data
Experience designing, drafting, and building aerospace wiring harnesses, including using ECAD tools such as E3, VeSys, IGE+XAO
We're a growing, motivated, fast-paced team of avionics professionals. We move quickly, and everyone wears multiple hats. We're looking for someone who is diligent and detail-oriented who can join our team and make an immediate impact.
The position will be located at our facility in Mountain View, California. Must be willing to travel up to 10% of the time.
At Reliable Robotics, we strive to provide competitive and rewarding compensation based on experience and expertise, as well as market conditions, location, and pay equity. In addition to base compensation, Reliable Robotics offers stock options, employee medical, 401k contribution, great co-workers and a casual work environment.
This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.
All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.
At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.
If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to
Compensation Range: $118K - $170K
Apply for this JobWe're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.
As a Senior Software Engineer - Engineering Productivity at Reliable Robotics, you will design, and implement software to support the development, analysis, and certification of automated aircraft systems. You will work closely with product owners and end users to develop solutions that enable and optimize engineering development workflows. The software you produce will be critical to the development and certification of the first fully autonomous aircraft.
Responsibilities
In your role as an internal tool developer, you will develop applications, infrastructure, and tools used by engineering to capture product requirements and interface definitions, model the product architecture and design, and reduce and analyze flight and lab test data. You will supercharge the engineering organization's efficiency and effectiveness by streamlining tools and processes. You will work with other teams and stakeholders to establish technical and UX design requirements for these projects and own the "plan, code, build, test, release, deploy" lifecycle of these applications and services.
Basic Success Criteria
Bachelor's degree in Computer Science, Computer Engineering, or equivalent experience
5+ years experience with professional full stack web development in a team setting
Professional experience with core browser technologies (JavaScript, HTML, CSS) and TypeScript
Experience structuring dynamic, model-driven data and determining data relationships
Experience working with SQL, NoSQL, and time series databases
Experience designing software architecture for both new and existing projects
Preferred Criteria
Experience using Python and libraries such as pandas, matplotlib, and django
Experience integrating with cloud platforms and infrastructure tools such as AWS, Terraform, and Docker
Experience designing and implementing ingestion pipelines for high-throughput streams of real-time telemetry
Experience integrating business intelligence and data visualization tools such as Tableau, Power BI, Superset, Metabase
Experience developing React components and reusable libraries/tools for developers
At Reliable Robotics, we believe that our internal tools are key ingredients to our success. Aircraft design, integration, and certification are highly complex processes requiring diligent management of data and their relationships. Traditionally a paper process, our tools enable our system designers to move faster, conduct more thorough and comprehensive analyses, and design safer aircraft systems. Come be a part of taking our products to the next level.
This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.
All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.
At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.
If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to
Compensation Range: $215K - $300K
Apply for this JobWe're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.
As a Sr. Manufacturing Engineer (Mechanical) at Reliable Robotics, you'll play a critical role in developing and continuously improving all aspects of our manufacturing, installation, and supply chain processes to meet design, regulatory, and business requirements (including safety, quality, cost, and on-time delivery). This is a growing team of highly motivated people passionate about delivering quality products and services on time, with unquestionable value. You will be responsible for designing the build and installation process for mechanical, electromechanical, and/or electrical/avionics products, conducting design for excellence (DFx) reviews, and developing the processes and infrastructure to help the business scale. The projects you work on will set the foundation for how the business operates for years to come. This is a fantastic opportunity to work in a safety-critical environment that takes automated aviation systems from prototype to production in a hands-on environment.
Responsibilities
Responsible for building, installing, testing, diagnosing, inspecting, and maintaining Reliable-designed mechanical, electromechanical, and/or electrical/avionics assemblies, harnesses, interconnects, and other commercial-off-the-shelf (COTS) products
Conduct design for excellence (DFx) reviews to evaluate designs for cost, producibility, inspectability, consistency, adequacy, accuracy, and conformance to requirements
Collaborate with design, quality, and certification teams to embed manufacturability, compliance, and risk mitigation in all phases of product development (e.g., prototype, R&D, certification, and production)
Develop and ensure compliance with all policies, procedures, quality management system, and engineering change orders
Develop processes to ensure accurate, current, and complete documentation (work instructions, inspections, tests, records, etc.) is utilized and maintained
Lead root-cause analysis and implement timely corrective actions to maintain schedule, quality, and reliability
Basic Success Criteria
Bachelor's degree in mechanical, electrical, aerospace, or systems engineering
7+ years of manufacturing, design, and/or testing experience
2+ years of experience with computer-aided design (CAD) and Product Lifecycle Management (PLM) software, such as Altium, NX, and Teamcenter
Preferred Criteria
Research and Development (R&D) or New Product Introduction (NPI) experience
Experience with industry or regulatory requirements such as AS9100, CFR 14 CFR 21.137, and/or 14 CFR Part 145
Previous leadership or management experience
Prior experience in troubleshooting, repairing, setting up, and operating complex hardware in a safety-critical environment
Our team is passionate about delivering on our commitments, solving hard problems, continuously improving, and helping the business succeed. We are constantly reevaluating our technologies, products, and capabilities. If you are a lifelong learner, you will love this environment. Get in on the ground floor and help us build the company.
The position will be located at our facility in Mountain View, California.
Must be willing to travel 10% of the time.
This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.
All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.
At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.
If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to
Compensation Range: $167K - $230K
Apply for this JobWe're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.
As a Manufacturing Manager at Reliable Robotics, you'll be responsible for manufacturing capacity and throughput, factory development and layout, leading a team of engineers and technicians, and improving our manufacturing processes to meet design, regulatory, and business requirements (including safety, quality, cost, and on-time delivery). This is a growing team of highly motivated people passionate about delivering quality products and services on time, with unquestionable value. You will have overall accountability for the manufacturing output of a broad portfolio of products, including mechanical, electromechanical, and/or electrical/avionics assemblies. You will also be responsible for leading hiring activities, managing manufacturing layout, equipment maintenance, optimizing manufacturing flow, ensuring tooling and and working with engineering on design for excellence (DFx) improvements. They also handle workforce development, production scheduling, risk mitigation, and performance monitoring to meet production targets. You are responsible for establishing the standards by which this team would operate, and for transitioning the organization from a start-up into a disciplined manufacturing organization. The projects you work on will set the foundation for how the business operates for years to come. This is a fantastic opportunity to work in a safety-critical environment that takes automated aviation systems from prototype to production in a hands-on environment.
Responsibilities
Responsible for building, testing, troubleshooting/diagnosing, inspecting, and maintaining Reliable-designed mechanical, electromechanical, and/or electrical/avionics assemblies, harnesses, and interconnects
Lead, coach, and provide technical mentorship to a team of engineers and technicians; write bi-annual reviews and manage the team's performance
Lead hiring, recruitment, and training for the technician team
Lead efforts to transition our products from engineering development to production
Ensure design for excellence (DFx) is communicated to the engineering and drive implementations across all manufacturing areas to improve cost, producibility, inspectability, consistency, adequacy, accuracy, and achieve conformance to requirements
Responsible for maturing the manufacturing factory and layout, including optimizing material flow, factory equipment (e.g., tooling, inspection, test, etc.) maintenance, tooling, automation, and business system
Monitor and communicate manufacturing status and risks, and establish key performance metrics to meet manufacturing targets
Partner with design, engineering, supply chain, and other departments to synchronize project plans and ensure manufacturing can meet demand
Develop and ensure compliance with all policies, procedures, quality management systems, and engineering change orders
Develop processes to ensure accurate, current, and complete documentation (work instructions, inspections, tests, records, etc.) is utilized and maintained
Ensure root-cause analysis is implemented and timely corrective actions are taken to maintain schedule, quality, and reliability
Basic Success Criteria
Bachelor's degree in mechanical, electrical, aerospace, or systems engineering
5+ years of manufacturing, design, and/or testing experience
3+ years of experience with computer-aided design (CAD) and Product Lifecycle Management (PLM) software, such as Altium, NX, and Teamcenter
Strong leadership, communication, team-building, and problem-solving skills
Preferred Success Criteria
Experience with assembly, machining, fabrication, soldering, Electro-Static Discharge (ESD), Foreign Object Debris (FOD), and test methods
Prior experience in troubleshooting, repairing, setting up, and operating complex hardware in a safety-critical environment
Research and Development (R&D) or New Product Introduction (NPI) experience
Experience with industry or regulatory requirements such as AS9100, CFR 14 CFR 21.137, and/or 14 CFR Part 145
Previous leadership or management experience
Our team is passionate about delivering on our commitments, solving hard problems, continuously improving, and helping the business succeed. We are constantly reevaluating our technologies, products, and capabilities. If you are a lifelong learner, you will love this environment. Get in on the ground floor and help us build the company.
The position will be located at our facility in Mountain View, California.
Must be willing to travel 10% of the time.
This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.
All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.
At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.
If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to
Compensation Range: $130K - $195K
Apply for this JobIt's a Preparation Problem.
If you're getting interviews but not offers, you're closer than you think—and that's the most frustrating stage to be in.
You've already proven you're employable enough to get screened, but something breaks during technical rounds: data structures, problem-solving, system design, project explanations, or even the way you communicate tradeoffs.
Most candidates don't fail because they're "not smart.” They fail because they prepared the wrong way—watching tutorials, building shallow projects, or memorizing answers without mastering fundamentals.
SynergisticIT's approach is built for this exact scenario.
Since 2010, SynergisticIT has helped candidates move from "almost” to "offer,” with many JOPP graduates landing salaries typically ranging from $90,000 to $154,000 depending on role and stack.
Candidates have received offers from employers such as Apple, Google, PayPal, Visa, Wells Fargo, Client, Client, Banking, Walmart Labs, AutoZone, Client, Client, and more.
The difference is that JOPP is designed to prepare you for how employers evaluate, not how bootcamps teach.
SynergisticIT works with clients hiring for entry-level software programmers, Java full stack developers, Python/Java developers, data analysts, data engineers, data scientists, and machine learning engineers.
The focus is on high-demand tracks: Java / Full Stack / DevOps and Data (Analytics/Engineering/Science) + Machine Learning/AI.
Interview success improves when you can demonstrate not only coding ability, but also the "end-to-end” thinking employers want: APIs, backend design, database decisions, cloud deployment, CI/CD, and real project narratives.
This is where many bootcamps fall short.
They train you, hand you a certificate, and leave you alone.
about 30% of candidates entering the Job Placement Program have already tried Udemy, Coursera, university bootcamps, or other coding bootcamps and still didn't land jobs—because those paths often focus on learning content, not passing interviews and securing offers.
Ideal candidates for interview-focused support include: recent grads with limited experience, candidates stuck after multiple interviews, professionals returning after layoffs, candidates with career gaps, and international candidates on F1/OPT who need employment to maintain status and pursue STEM extension/H-1B pathways.
SynergisticIT also supports the candidate journey by assisting with STEM extension and providing process support for H-1B/green card filing through employment partners (actual filing depends on the employer).
Explore resources and get started: If you want to explore the program directly, here are the key links: Job Placement Program (JOPP): Java Job Placement Program Data Science / Data Jobs Program Event videos (OCW, JavaOne, Gartner): USA Today feature Contact: If you're tired of being "final round” without the offer, stop guessing and start preparing with a plan.
Fill out the SynergisticIT contact form and ask about the JOPP track that matches your target role.
Please read our blogs Why do Tech Companies not Hire recent Computer Science Graduates | SynergisticIT What Recruiters Look for in Junior Developers | SynergisticIT Software engineering or Data Science as a career? How OPT Students Can Land Tech Jobs – SynergisticIT
Remote working/work at home options are available for this role.
Note:
- 100% REMOTE must report on-site for 1st day to 30 E Broad Street, 13th Floor Columbus, Ohio 43215
- Interviews will be via Teams J0B DESCRIPTION:
- This Position will design and implement Agency data engineering solutions, including data platform evaluation, selection recommendations, data modeling, and enterprise data architecture development.
- This position will serve as a senior technical contributor responsible for shaping and advancing the Agency’s data ecosystem through scalable, secure, and well-governed data design practices.
- This position will make technical decisions affecting configuration and implementation of data analytics environments, data platforms, integration systems, and environment-specific data storage solutions.
- This position will collaborate with IT Architecture staff, the Agency CIO, and IT Managers to design data solutions aligned with agency business needs, enterprise standards, and long-term architectural direction.
- This position will assist in evaluating solution designs, contributing to business case analysis, and recommending IT architecture improvements.
This role will serve as a significant contributor to the Agency’s data modeling and data architecture practices, including:
- Designing and maintaining conceptual, logical, and physical data models supporting enterprise analytics and operational systems
- Establishing and promoting data modeling standards, naming conventions, and design patterns
- Contributing to the development and evolution of the Agency’s enterprise data architecture roadmap
- Supporting domain-driven and scalable data design approaches aligned with enterprise data platforms and data governance objectives
- Providing architectural guidance to ensure data solutions are reusable, interoperable, and aligned with enterprise integration strategies
- This position will recommend technical strategy by defining tasks and leading technical discussions related to design, implementation, operation, optimization, and ongoing maintenance of data systems.
- The position will work closely with Enterprise partners to determine and configure integrations between agency systems and enterprise data lake, data quality, and data curation platforms.
- It is critical that this position possess at least five (5) years of proven experience related to data integration, data cleansing, data classification, and data modeling.
- This position will provide technical leadership and guidance to DODD’s Data Management team by designing and implementing best-practice solutions for integrating agency and enterprise data platform environments.
SKILL MATRIX:
- Experience with Salesforce platforms
- Required
- Experience with Microsoft Environments including Azure and Dynamics
- Required
- Experience with Stream Sets data integration pipelines
- Required
- Experience with Snowflake data platform
- Required
- Experience with Tableau analytics integration
- Required Question 1: Do you understand, and will abide by, the provision in your subcontract with OST that it is PROHIBITED for government equipment to be taken or used outside of the United States by your contractors? The consequences of this occurring can and will result in repercussions to you, the prime vendor, regardless if the candidate works for a sub-vendor of yours.
It will also result in immediate termination of the contractor and make them ineligible for rehire in the program.
Question 2: Is your candidate able to report to 30 E Broad Street, 13th Floor Columbus, Ohio for their 1st day? Question 3: Client prefers candidates based in Ohio, in case contractors are required to work on-site in the future.
Where is your candidate currently located? Question 4: Selected candidate will be required to complete an FBI Fingerprint check.
Does your candidate accept? Location: 100% Remote, Columbus, OH Type: Long term contract Worksite Location: 30 E Broad Street, 13th Floor Columbus, Ohio 43215 Please send resume to "jobs at etechnovision dot com" with B4109B in Subject for immediate consideration.
Remote working/work at home options are available for this role.
Salary: $190,000
- $210,000 per year A bit about us: We are a global leader in AI-driven imaging and care coordination software that empowers clinical teams to accelerate diagnosis, streamline workflows, and improve patient outcomes.
Our cloud-based solutions are trusted by hospitals worldwide, supporting the majority of the Nation's stroke cases and many more across countries around the world.
Why join us? What We Offer: Competitive base pay and overall compensation package Full benefits: Medical, Dental, Vision Generous PTO, vacation, sick, and holidays Life Insurance coverage 401K Job Details Responsibilities: 1.
Develop, maintain, and optimize iOS applications for our platform.
2.
Collaborate with cross-functional teams to define, design, and ship new features.
3.
Work on bug fixing and improving application performance.
4.
Continuously discover, evaluate, and implement new technologies to maximize development efficiency.
5.
Ensure the performance, quality, and responsiveness of applications.
6.
Collaborate with the team to define, design, and ship new features.
7.
Identify and correct bottlenecks and fix bugs.
8.
Help maintain code quality, organization, and automatization.
9.
Work with outside data sources and APIs.
10.
Unit-test code for robustness, including edge cases, usability, and general reliability.
Qualifications: 1.
BS/MS degree in Computer Science, Engineering or a related subject.
2.
Proven working experience in working with respectable companies.
3.
10+ years of commercial experience building mobile applications for iOS 4.
High level of skill in Swift programming 5.
Deep knowledge of the iOS SDK and device capabilities 6.
A good understanding of the unique challenges of mobile development (intermittent connectivity, push notifications, app version/device/OS fragmentation etc.) 7.
Solid understanding of the full mobile development life cycle.
8.
High level of skill in git and GitHub 9.
Experience in hybrid applications is a plus Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Remote working/work at home options are available for this role.
Salary: $95,000
- $120,000 per year A bit about us: We are a specialized consulting firm dedicated to helping organizations uncover tax savings and improve cash flow through strategic, compliance-driven solutions.
Our team brings deep expertise in cost segregation, fixed asset studies, and tax incentives, working closely with real estate owners, developers, and operating businesses across a wide range of industries.
We combine engineering, tax, and accounting knowledge to deliver precise analyses that align with current tax regulations and evolving guidance.
Known for our collaborative approach and technical rigor, we partner with clients to optimize financial outcomes while maintaining the highest standards of accuracy, transparency, and integrity.
Why join us? fully remote medical 100% paid dental vision HSA 401k match vested from day one bonus structure of 8 to 12% base salary of 95 to 120k Job Details About the Opportunity We are a specialty tax consulting firm focused on helping businesses identify, document, and maximize Research & Development (R&D) tax credits.
Our multidisciplinary team includes tax professionals, engineers, and legal experts who work collaboratively to deliver technically sound, compliant, and defensible credit studies.
We partner closely with clients to provide practical insights that drive meaningful financial outcomes.
We are seeking a motivated and detail-oriented R&D Tax Credit Project Manager to lead the execution and delivery of R&D tax credit engagements and serve as a trusted advisor to our clients.
About the Role The R&D Tax Credit Project Manager is responsible for managing R&D tax credit studies from initial kickoff through final delivery.
This role serves as the primary point of contact for clients, oversees project timelines and deliverables, and ensures all studies are accurate, compliant, and well-documented.
This position is ideal for a professional with hands-on R&D tax credit experience who has successfully completed at least one full R&D tax credit season and understands both the technical and financial aspects of the credit.
The ability to confidently guide clients through the full lifecycle of an R&D engagement is essential.
Key Responsibilities Manage R&D tax credit engagements from kickoff through final deliverables Evaluate client operations to identify qualifying research activities and eligible expenditures Apply and clearly explain IRC Sections 41 and 174 in a practical, client-friendly manner Collaborate with engineers, attorneys, and CPAs to analyze technical narratives and financial data Develop and manage project scopes, timelines, and deliverables Serve as the primary client contact throughout the engagement lifecycle Prepare comprehensive R&D study reports and supporting documentation Ensure compliance with current tax laws, regulatory guidance, and industry best practices Participate in client meetings, presentations, and internal review processes Maintain a client-focused, non-disruptive approach while maximizing credit opportunities Qualifications Bachelor’s degree in accounting, finance, engineering, economics, or a related field Minimum of 2 years of direct R&D tax credit experience required Must have participated in and completed at least one full R&D tax credit season 2–4 years of experience in tax, consulting, or project management Strong working knowledge of IRC Section 41; familiarity with Section 174 preferred Experience identifying qualified research activities and expenses, including wages, supplies, and contract research Strong analytical, organizational, and problem-solving skills Excellent written and verbal communication skills Ability to manage multiple projects and deadlines independently Proficiency with Microsoft Office and project management tools What We Offer Fully remote work environment Ownership and visibility over client engagements Collaborative team of experienced R&D tax professionals, engineers, and attorneys Exposure to complex, high-impact specialty tax projects Supportive culture focused on quality, accountability, and professional growth Important Note This role requires hands-on R&D tax credit experience through at least one full tax credit season.
Candidates without direct R&D specialty tax experience may not be considered.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Remote working/work at home options are available for this role.
- Nashville Area (Hybrid) This Jobot Job is hosted by: Tony Barhoum Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $130,000
- $155,000 per year A bit about us: Award Winning Engineering Consulting firm with over 10 offices Nationwide.
For over 70 years we consistently ranked among the largest MEP and structural engineering firms in the country, we are an industry leader with expertise in diverse markets, from education to healthcare to aviation.
We are dedicated to meeting our clients' M.E.P.
engineering needs by providing architectural lighting and mechanical systems design, building commissioning services, technology systems design, life support systems engineering, and fire protection engineering.
Our two generations of technical expertise, combined with our business partnerships and the latest software and MEP technology, have earned us industry admiration, partner respect, and client loyalty.
Why join us? BENEFITS Hybrid Work & Flexible Schedules Competitive Salary & Bonuses! Full Benefits Package! 401K Plan with Competitive Match Professional Development, Tuition & Certification Reimbursement Accelerated Career Growth! Job Details Senior Electrical Engineer PE / Technical Leader
- Nashville Area (Hybrid) Salary: $130K to $155K (Total Comp $140K to $165K) We are seeking a Senior Electrical Project Engineer/Project Manager to join our Team! Successful Candidates will have experience delivering Design/Build and Renovation Projects ideally for Healthcare, Commercial, Education, Government, Transportation, etc.
Must have Engineering Consulting experience managing multiple projects at various stages, including all planning, design, production, quality control and financial responsibilities.
This person will provide technical leadership, mentoring & guidance to team members to assure total quality of all engineering efforts; Coordinates the activities of all team members and assures production meets schedules while producing a reasonable profit.
Qualifications 10+ years of experience Designing and Managing Electrical/MEP Projects for Engineering Consulting or Design/Build environment Proven experience as an Electrical Engineer Designing Power and Lighting Building Systems on complex projects.
Project Experience Delivering New Construction and/or Renovation Projects for Healthcare, Commercial, Education, Government, Transportation, etc.
Licensed Professional Engineer (PE) Proficient in AutoCAD and Revit Software Construction Costs and Life Cycle Analysis; Experience Managing Moderate to Complex Projects Ability to schedule and manage tasks for the electrical discipline Demonstrated success in technical / formal communication with clients and staff Proven ability to represent the electrical discipline at meetings Ability to mentor junior level staff.
Excellent communication and interpersonal skills.
Demonstrated familiarity with Local Building Codes & Standards.
Strong technical leadership and management skills.
BENEFITS Hybrid Work & Flexible Schedules Competitive Salary & Bonuses! Full Benefits Package! 401K Plan with Competitive Match Professional Development, Tuition & Certification Reimbursement Accelerated Career Growth! If Interested, Please Apply or Email Me Your Resume Directly at: /> Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Remote working/work at home options are available for this role.
