Engineering Jobs in Roselle, IL

Title: Senior Engineer,MEMS Characterization

Department: MEMS Engineering

Location: Itasca, Illinois

SUMMARY DESCRIPTION:

MEMS Characterization Senior Engineer will work with design, process, and failure analysis engineer on assisting characterization and failure analysis of the MEMS device, while supporting technology development, product qualifications and quality monitoring. Employee will maintain and develop new test solutions, recommend hardware requirements based on existing trends in characterization.

Responsibilities

• Developing and maintain MEMS test solutions for production failure analysis, collaborating with design and process engineering to further characterization efforts and drive yield improvement
• Ensuring hardware and software installations are maintained.
• Continuous improvement of characterization capabilities collaborating with MEMS development team
• Perform microphone, MEMS, assembly failure analysis
• Work with design and process engineer to define characterization requirements and support execution of the characterization, including submitting work order requests and writing characterization reports.

Qualifications

• Master of Science/Engineering in Electrical/Mechanical/Material/Physics (or related field) with 2-5 years’ experience. PhD is a plus
• Experience in troubleshooting, debugging and with failure analysis of MEMS sensors is desired
• Familiar with material/device characterization using optical, electrical, mechanical methods
• Basic knowledge of acoustics and mechanics is an asset.
• Must be a team player with good communication skill.
• Familiar with material/device characterization using optical, electrical, mechanical methods
• Knowledge of calibration methodologies and best practices
• Basic knowledge of statistical analysis (JMP, MiniTab, R) is an asset
• Reliability testing experience is an asset
• Experience with electrical test equipment such as parameter analyzer, oscilloscope, probe station, and data acquisition system are desired
• Experience with advanced surface science methodologies (SEM, Raman, Auger, FIB, FTIR) an asset
• Hands on experience on developing environmental testing setup and fixtures for sensors under thermal, vibration, and electrical tests is a plus
• Solid foundation in MEMS microphone acoustics theory, including capacitive transduction principles (Experience analyzing thin-film residual stress, mechanical-electrical sensitivity optimization, damping resistance (Skvor's formula), and high-frequency response/SNR enhancement mechanisms) is a plus
• Proficient in finite element analysis (FEA) tools such as COMSOL Multiphysics or ANSYS for 3D MEMS microphone simulations is a plus
• Understand the principle of dynamic system modeling and proficient in Matlab Simulink and LTSpice is a plus

COMPANY DESCRIPTION:

Knowles is a market leader and global provider of advanced micro-acoustic microphones and balanced armature speakers, audio solutions, and high performance capacitors and radio frequency ("RF") filtering products, serving the MedTech, defense, consumer electronics, electric vehicle, industrial, and communications markets. Our focus on the customer, combined with unique technology, proprietary manufacturing techniques, and global operational expertise, enables us to deliver innovative solutions across multiple applications. Knowles, founded in 1946 and headquartered in Itasca, Illinois, has approximately 7,000 employees at facilities located in 13 countries around the world. At Knowles, we are committed to engineering a better tomorrow through the actions we take on a daily basis. We believe that our focus on ethical, socially responsible, and environmentally sustainable behavior guides our decision-making processes and helps keep us accountable. Visit us at

EEO-M/F/D/V

Company Description

ITW Electronic Component Solutions is a global leader, comprised of distinguished brands specializing in unique product technologies for various industries. These industry-leading brands provide innovative solutions to key markets, reinforcing ITW as a trusted name in electronic component solutions worldwide. The ITW ECS group includes ITW Formex, ITW Linx, and ITW Lumex, all of which contribute to the development of cutting-edge technologies across global markets.

The Buyer/Planner is responsible for planning and scheduling production activities while managing the procurement of raw materials, components, and services required for the ITW ECS business units. This role ensures that production schedules, material availability, and supplier performance align to meet customer demand, maintain optimal inventory levels, and support overall operational efficiency. This is a full-time, onsite position in Bartlett, IL. Only local candidates will be considered.

Key Responsibilities

Production Planning & Scheduling

• Develop, maintain, and adjust production schedules based on customer demand, forecasts, and capacity constraints
• Coordinate daily production planning activities with operations, ensuring labor, equipment, and materials are properly allocated
• Monitor work‑in‑process and finished goods levels to ensure on‑time order completion
• Communicate schedule changes or risks to operations, customer service, and leadership

Material Planning & Inventory Management

• Maintain accurate material requirements planning (MRP) within the ERP system
• Ensure adequate inventory levels are maintained to meet production schedules while minimizing excess or obsolete stock
• Conduct root‑cause analysis on shortages, delays, or inventory inaccuracies and implement corrective actions
• Track safety stock levels and update planning parameters as needed

Purchasing & Supplier Management

• Source, select, and purchase raw materials, components, and indirect supplies in alignment with production needs
• Manage supplier relationships and monitor vendor performance.
• Track and publish critical supply chain metrics, including customer and supplier on-time delivery.
• Follow up on open purchase orders, expedite materials when needed, and resolve delivery or quality issues
• Maintain accurate vendor records and purchasing data in the ERP system

Capacity & Resource Planning

• Analyze production capacity, equipment constraints, and labor availability to ensure feasible schedules
• Recommend adjustments to staffing levels, shift schedules, or outsourcing when required to meet demand
• Partner with engineering on new products, engineering changes, and phase-outs

Cross-Functional Collaboration

• Coordinate with procurement, operations, engineering, customer service, and quality to maintain smooth production flow
• Communicate proactively regarding material constraints, schedule risks, and priority changes
• Support S&OP processes by providing data on capacity, demand, inventory, and supplier performance

Continuous Improvement

• Implement Lean, Six Sigma, or other process improvement initiatives to enhance material flow and scheduling accuracy
• Improve planning tools, part parameters, and forecasting methods
• Participate in cost-reduction efforts through sourcing, inventory optimization, and process efficiencies

Minimum Required Skills and Education

• High School Diploma required
• 3 years of experience in production planning, materials management, or purchasing in a manufacturing environment
• Prior experience with ERP/MRP systems
• Strong analytical and organizational skills
• Proficiency with Excel and planning tools
• Knowledge of manufacturing processes, capacity planning, and inventory control principles
• Ability to speak, read, and write in English

Preferred Skills and Education

• Associate’s or Bachelor’s degree in Supply Chain, Operations, Business or related field
• Experience with Epicor ERP preferred

Work Conditions

• Primarily office environment, but may require periodic walking throughout the facility to coordinate with production, shipping, and warehouse teams

This is a full-time, onsite position in Bartlett, IL. Only candidates local to the Chicago area will be considered.

Compensation range: $30-$32 per hour

Why ITW ECS?

Here’s what we offer to help you build the future you want:

• Generous Retirement Benefits – 401(k) match PLUS an additional retirement contribution to help you plan for the future.
• Paid Time Off – Paid holidays, sick days, and vacation time to take time for what matters.
• Company-Paid Insurance – Life, AD&D, Short-Term & Long-Term Disability insurance to give you peace of mind.
• Family-Friendly Benefits – 4 weeks of paid parental leave and adoption reimbursement to support your family journey.
• Education Assistance – tuition reimbursement because we believe in investing in your personal and professional development.

ITW is an equal opportunity employer. We value our colleagues’ unique perspectives, experiences and ideas and create workplaces where everyone can develop their careers and perform to their full potential. 

As an equal employment opportunity employer, ITW is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship. 

All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status or any other characteristic protected by applicable federal, state, or local laws.

About the Company

MultiTech, founded in 1993 and headquartered in Carol Stream, IL, is a top provider of highly engineered metal components and assemblies. MultiTech serves the Automotive, Industrial, Hydraulics and Power Transmission & Distribution market industries, with sales of $180 million. MultiTech operates seven manufacturing facilities and six distribution sites in the US, Mexico, and Asia. Our mission is to build a leading global metal manufacturing and assembly organization combining technology with superior quality manufacturing capabilities executed by our best asset - our employees. The ideal candidate will build on their experience and skills while growing with the company through career advancement opportunities.

About the Role

The Production Control Coordinator is responsible for planning, scheduling, and coordinating production activities to ensure efficient workflow, on-time delivery, and accurate ERP system data. Works closely with Operations, Purchasing, and Shipping to support daily manufacturing needs.

Responsibilities

• ERP Management (Epicor):
• Maintain and update production schedules within Epicor.
• Create and release work orders/jobs and ensure all required data is accurate.
• Monitor job statuses and perform job closings in a timely manner.
• Maintain accurate BOM/routing changes when identified thru Engineering.

Production Scheduling:

• Schedule primary machines and key resources to optimize throughput and minimize downtime.
• Adjust schedules based on priority changes, machine availability, material constraints, and customer needs.
• Communicate daily schedule priorities with Production Supervisors.

Material Coordination:

• Release raw material to jobs and ensure correct inventory transactions.
• Prevent shortages and ensure timely material availability.

Workflow & Coordination:

• Track WIP levels and move jobs through departments as required.
• Support continuous improvement to reduce bottlenecks and improve lead times.
• Maintain strong communication with Manufacturing, Quality, and Shipping teams.
• Reporting & Accuracy:
• Analyze and resolve Epicor transaction errors, quantity discrepancies, and job variances.
• Generate daily/weekly production reports for management review.

Qualifications

• Experience with ERP systems; Epicor experience preferred.
• Strong understanding of manufacturing workflows and machine scheduling.
• Ability to interpret work orders, BOMs, and blueprints (a plus).
• Excellent organizational and communication skills.
• Detail-oriented with strong problem-solving abilities.

Job Metrics / Success Indicators:

• On-time delivery performance
• Schedule adherence and machine utilization
• Accuracy of inventory and job costing
• Reduction in late jobs and production bottlenecks

Equal Opportunity Statement

MultiTech Industries is an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate on the basis of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law.

Terms of Employment

• W2 Contract-to-Hire, 12 Months
• This role operates on a hybrid schedule, requiring three days in-office (Tuesday, Wednesday, and Thursday) and two days remote (Monday and Friday)
• Core working hours between 09:00 and 15:00

Overview

Our client is seeking a Senior Project Manager to manage engineering, construction, outage coordination, testing, and commissioning activities for transmission and substation projects. The successful candidate will oversee Transmission level Protection and Control replacement projects and/or Transmission line projects, ensuring seamless execution through a deep understanding of equipment function and construction sequencing.

Responsibilities

• Manage the full lifecycle of transmission and substation projects, including engineering, construction, and commissioning.
• Coordinate complex outages and system operations to ensure project milestones are met without compromising grid stability.
• Interpret one-line diagrams and technical specifications to understand equipment interfaces and functions.
• Anticipate and mitigate risks related to outages and commissioning sequences.
• Collaborate and communicate effectively with internal teams, including engineering, construction, and system operations.
• Oversee physical construction projects, ensuring adherence to safety and technical standards.

Required Skills & Experience

• STEM degree or a technical degree; however, significant professional experience may complement an arts degree.
• 7+ years of relevant experience.
• Proven utility project management experience, specifically within substation or transmission environments.
• Core technical understanding of Transmission & Substation (T&S) equipment.
• Extensive knowledge of construction and commissioning sequences.
• Hands-on experience managing physical construction projects.
• Strong communication skills for effective team and stakeholder coordination.

Preferred Skills & Experience

• PMP is highly preferred
• Experience specifically with Transmission level Protection and Control replacement.
• High-level awareness of outage and system operations within a utility framework.
• Ability to work effectively within a large team environment

• Develop comprehensive project plans, schedules, and resource allocations.
• Define project scope, goals, milestones, and deliverables in alignment with project success.
• Manage project lifecycle from order hand-off through closeout, ensuring timely execution and customer satisfaction.
  
  

• Lead cross-functional teams and facilitate effective communication among engineering, operations, sales, procurement, and external partners.
• Assign tasks, set expectations, and provide guidance to ensure successful execution.
• Conduct regular project meetings and provide status updates.
  
  

• Identify potential risks and create mitigation strategies.
• Track project issues and drive timely resolution.
• Manage scope changes through structured change order processes.
  
  

• Serve as primary point of contact for project stakeholders and customers.
• Build and maintain strong relationships through timely communication and transparent updates.
• Ensure customer requirements are captured, understood, and delivered.
  
  

• Ensure project deliverables meet engineering, safety, and regulatory standards.
• Conduct project reviews and post-project evaluations to drive continuous improvement.
  
  

• Bachelor’s degree in engineering, business, construction management, or technical field.
• 3–7 years of project management experience preferred. Experience in managing electrical distribution equipment is desired.
• PMP, CAPM, or similar certification is a plus.
  
  

• Strong organizational and time-management skills.
• Excellent communication and interpersonal abilities.
• Proficiency with project management tools (SEG building a custom tool now)
• Ability to lead teams and influence without direct report responsibility.
• Strong Microsoft Excel skills and overall proficiency with data analysis and reporting tools (e.g., Google Sheets, ERP exports, Power BI preferred).
• Strong analytical and problem-solving skills.
• Ability to manage multiple projects and deadlines in a fast-paced environment.
  
  

• Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law.
  
  

Position Summary:

The Applications Engineer is responsible for providing technical expertise, process development, and customer support related to industrial machinery. This role bridges engineering, sales, and service by demonstrating machine capabilities, optimizing cutting parameters, and ensuring customers achieve maximum value from their laser systems.

Primary Responsibilities:

• Develop and optimize laser cutting parameters for various metals and material thickness.
• Conduct machine demonstrations, trials, and proof of concept test for prospective customers.
• Troubleshoot cutting quality and process issues.
• Provide on-site and remote training to customers on machine operation, maintenance, and process optimization.
• Develop and document cutting process databases, application notes, and best practice guides.

Secondary Responsibilities:

• Support installation and commissioning at customer sites as needed
• Prepare technical documentation, cutting samples, and reports for customer presentations
• Support trade shows, open houses, and industry events with live demonstration and technical expertise
• Assist in product development by relating customer and application insights to R&D

Position Requirements:

• Bachelor’s degree in mechanical or manufacturing engineering, Materials Science, or a related technical field (Equivalent experience may be considered)
• 5+ Years of experience in laser processing, CNC machinery, or precision metal fabrication
• Hands-on experience with fiber laser products highly preferred
• Knowledge of motion controls systems, optics, and materials sciences is a plus
• Familiarity with CAD/CAM software
• Travel requirement is 25%

HSG is committed to ensuring equal employment opportunities to all qualified persons without regard to race (including associated hairstyles), color, religion, sex, gender identity, sexual orientation, national origin, ancestry, citizenship status, age, marital status, genetic information, military status, unfavorable discharge from military service, order of protection status, pregnancy, arrest record, disability, or any other status protected by applicable law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. HSG participates in E-Verify and conducts pre-employment drug testing and background checks as part of our hiring process.

LHH Recruitment Solutions has partnered with a growing organization, and they are seeking a motivated Forecast Planning Analyst – Healthcare/Medical Device to join their team. This is an exciting opportunity for a data-driven professional who thrives at the intersection of analytics, supply chain strategy, and cross-functional collaboration. The ideal candidate will play a key role in shaping demand visibility, improving forecast accuracy, and supporting inventory and production decisions in a fast-paced, growth-oriented setting.

Why This Opportunity Stands Out:

• High-impact role supporting critical supply chain decisions.
• Exposure to enterprise-level ERP systems (SAP experience highly valued).
• Collaborative environment working closely with operations, planning, and commercial teams.
• Strong emphasis on continuous improvement and analytical rigor.

Key Responsibilities:

• Develop, analyze, and maintain demand forecasts using historical data, trends, and business inputs.
• Partner with cross-functional stakeholders to align forecasts with sales, production, and inventory strategies.
• Evaluate forecast performance, identify variance drivers, and recommend corrective actions.
• Support demand planning and S&OP-style discussions through data-driven insights.
• Build and enhance forecasting tools, models, and reporting to improve visibility and decision-making.
• Leverage ERP and planning systems to ensure accurate data flow and planning alignment.
• Conduct ad hoc analysis to support operational and financial planning initiatives.
• Contribute to process improvements that reduce inventory risk, stockouts, and excess.

Qualifications and Skills:

• Bachelor’s Degree in Business, Supply Chain, or a related field.
• Experience working in a manufacturing and/or distribution environment.
• Previous experience in healthcare, medical device, or similar highly regulated industries.
• Strong forecasting and demand planning experience with a solid understanding of supply chain principles.
• Advanced Excel capabilities, including VLOOKUPs, Pivot Tables, and complex data analysis.
• Hands-on experience with ERP systems; SAP exposure is a significant plus.
• Proven ability to translate complex data into actionable business insights.
• Familiarity with statistical forecasting methodologies and planning tools.
• Experience supporting inventory optimization and production planning efforts.
• Strong analytical mindset with attention to detail and accuracy.
• Ability to communicate clearly with both technical and non-technical stakeholders.
• Comfortable working in a dynamic, deadline-driven environment.

Compensation Range: $60,000 - $75,000

Benefits Offered: 2 weeks of vacation, paid sick leave where applicable by state law, Medical Insurance, Dental Insurance Vision Insurance, 401K, and Life Insurance.

If you are a passionate Forecast Planning Analyst looking for anew and rewarding career, please apply today! You don’t want to miss out on this opportunity!

LHH is a leader in permanent recruitment—and in the placement of top talent. Our areas of specialty include office administration, customer service, human resources, engineering, and supply chain and logistics. Please feel to check us out and apply for other opportunities if this role isn’t a perfect match.

Equal Opportunity Employer/Veterans/Disabled

To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit

• Regional, spinal, and epidural anesthesia
• Pediatrics: Fellowship required

The Inside Sales Representative (ISR) plays a key role in generating new business by connecting with owners and decision makers, qualifying prospects, and setting appointments for our Outside Sales team. This role matters because it is the engine that fuels our growth; your ability to create the first connection with potential customers ensures a steady pipeline of qualified opportunities and supports our expansion into new markets.

The ISR focuses on outbound prospecting within our Ideal Client Profile (ICP), gathering key information, and setting qualified appointments. You’ll also manage and build our prospect database to ensure accurate follow‑up and a strong flow of leads. This role is the first step in bringing in new customers and directly impacts our sales success.

Key Responsibilities

• Lead Generation: Make 80–100 outbound calls daily to identify and engage potential customers.
• Information Gathering: Gather basic information via phone, LinkedIn, and/or websites to further qualify prospects.
• Appointment Setting: Schedule a minimum of three qualified appointments per week with potential customers.
• Relationship Building and Nurturing: Set follow‑up calls and activities to further develop relationships with prospective business owners or decision makers.
• Marketing Follow‑up: Promptly contact and qualify prospects generated by marketing activities.
• Prospect Database Management: Organize prospects into categories to determine qualification, ownership, and appropriate follow‑up.
• Document all activities and interactions in the CRM tool.
• Update Inside Sales Playbook daily with total activities performed.
• Attend weekly sales meetings and report on activities performed.

Additional Duties and Responsibilities

• Develop in‑depth knowledge of the inside sales process and continually refine best practices.
• Attend Inside Sales Workshops and refine calling strategies.
• Enter new contacts and businesses into the prospect database from internal sources, acquired lists, or marketing activities.
• Generate email templates and follow‑up communication for prospects.
• Promptly follow up on chat requests generated through the website.
• Field inbound sales calls and leads from various sources and qualify for business potential.
• Document internal processes and procedures related to duties and responsibilities.
• Maintain CRM data, share best practices, improve processes, and provide clear and consistent reporting to management.

What You Bring

• Strong phone skills with the ability to reach prospects creatively, identify decision makers, and handle objections professionally.
• 1-3 years of sales experience
• High energy and drive with strong conversational skills.
• Persistence in reaching decision makers and identifying key information about prospects.
• Skill in preparing written communications and materials.
• Interpersonal skills including communication, active listening, and customer care.
• Ability to redirect prospects on the phone and adapt quickly to changes.
• Typing skills for quick and accurate data entry.
• Self‑motivation and discipline to adhere to the inside sales process.

Benefits

• Commission‑based incentives
• Premier health, dental, and vision benefits
• 401(k) retirement plan
• Complete on‑the‑job training and support
• Fun working environment and culture
• Onsite gym & cafe
• Hybrid schedule
• Great opportunity for advancement

Salary:

$40,000 - $60,000

LHH Recruitment Solutions has partnered with a growing organization, and they are seeking a motivated Mechanical Design Engineer to join their team. This is a unique opportunity to work on cutting-edge projects in a collaborative, growth-oriented environment.

Key Responsibilities:

• Design and develop mechanical and electromechanical assemblies for high-precision CNC equipment, including grinding and turning machines.
• Create detailed drawings for fabricated, machined, and sheet metal components using 3D CAD software (SolidWorks or Inventor preferred).
• Lead the design of castings, weldments, and high-precision machined parts, ensuring manufacturability and quality.
• Perform simulations and interference checks to validate design feasibility.
• Collaborate with cross-functional teams—including automation, manufacturing, and sales—to deliver innovative solutions.
• Support automation integration and provide engineering expertise to internal and external stakeholders.
• Contribute to the management of BOMs and design documentation within ERP and PDM systems.
• Apply principles of mechanics, thermodynamics, and fluid dynamics to evaluate and optimize system performance.

Qualifications and Skills:

• Bachelor’s degree in Mechanical Engineering.
• Minimum 5 years’ experience designing complex mechanical and electromechanical assemblies, ideally for machine tools or related capital equipment.
• Background in the CNC machine tool industry.
• Familiarity with grinding and lathe technologies.
• Proficiency in 3D CAD (SolidWorks or Inventor strongly preferred).
• Demonstrated experience with castings, weldments, high-precision machined components, and sheet metal design.
• Strong understanding of manufacturing processes and materials.
• Excellent communication skills and ability to work effectively in a team environment.
• High level of professionalism and discretion in handling confidential information.
• Experience with JD Edwards ERP systems.
• Knowledge of fluids (pneumatics, hydraulics) and their applications in machinery.

Compensation Range: $85,000 - $110,000

Benefits Offered: 3 weeks of vacation, paid sick leave where applicable by state law, Medical Insurance, Dental Insurance Vision Insurance, 401K, and Life Insurance.

If you are a passionate Mechanical Design Engineerlooking for anew and rewarding career, please apply today! You don’t want to miss out on this opportunity!

LHH is a leader in permanent recruitment—and in the placement of top talent. Our areas of specialty include office administration, customer service, human resources, engineering, and supply chain and logistics. Please feel to check us out and apply for other opportunities if this role isn’t a perfect match.

Equal Opportunity Employer/Veterans/Disabled

To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit