Engineering Jobs in Plano Texas Remote

JOB SUMMARY

Responsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.
Third Shift: Monday - Friday 11:00 p.m. - 7:00 a.m.

ESSENTIAL DUTIES AND RESPONSIBILITIES

· Diagnose and repair to basic powered functional test failures (power, traffic, network issues) to a component level on electronic circuit board assemblies while maintaining minimal quantities of Engineering and Component hold assemblies.
· Exhibit proficiency in the use of electronic test and measurement equipment.
· Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM’s, EC documents, Visuals, Debug, Testing tools and procedures.
· Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.
· Understand, recognize and execute Jabil production requirements, rules, policies and procedures.
· Work as a team member to achieve Diagnostic department’s process yield goals.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.

JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS

· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.

Jabil is seeking a Site Engineering Manager to lead industrial engineering, facilities engineering, and site infrastructure for a fast‑growing electronics manufacturing operation. This leader will drive production efficiency, equipment reliability, and site readiness across high‑mix/high‑volume PCB assembly and secondary processes.

What You’ll Do

- Lead and develop a multidisciplinary engineering team, building technical capability, coaching future leaders, and fostering a culture of continuous improvement.

- Oversee process engineering across SMT lines, secondary processes (e.g., conformal coating, selective coating, potting), and automated inspection systems (AOI/AXI, Neptune, etc.).

- Optimize production layouts, workflows, and capacity to support throughput, cost, and quality targets.

- Direct facilities operations, including preventive maintenance, building infrastructure, utilities, space planning, and site expansion projects.

- Ensure safety, environmental compliance, and readiness of all site systems supporting electronics manufacturing.

- Manage engineering budgets, capital planning, and resource allocation, understanding how engineering decisions influence productivity, cost structure, and P&L performance.

- Partner cross‑functionally with Operations, Quality, Supply Chain, and EHS to support scalable growth and new product introduction.

What You Bring

- Bachelor’s degree in engineering or related field, plus 5-8 years’ related experience and 2-3 years in a management role required, or equivalent combination of education and experience.

- Experience in electronics manufacturing environments with exposure to SMT assembly, PCBA flow, coating applications, and automated inspection technologies.

- Strong foundation in industrial engineering principles, facilities management, and continuous improvement methodologies.

- Proven ability to develop people, strengthen engineering organizations, and build succession pipelines.

- Analytical, data‑driven decision maker with awareness of cost drivers, ROI, and financial impact of engineering initiatives.

- Effective communicator and collaborator with a hands‑on leadership style.

JOB SUMMARY

Responsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.
Third Shift: Monday - Friday 11:00 p.m. - 7:00 a.m.

ESSENTIAL DUTIES AND RESPONSIBILITIES

· Diagnose and repair to basic powered functional test failures (power, traffic, network issues) to a component level on electronic circuit board assemblies while maintaining minimal quantities of Engineering and Component hold assemblies.
· Exhibit proficiency in the use of electronic test and measurement equipment.
· Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM’s, EC documents, Visuals, Debug, Testing tools and procedures.
· Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.
· Understand, recognize and execute Jabil production requirements, rules, policies and procedures.
· Work as a team member to achieve Diagnostic department’s process yield goals.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.

JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS

· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.

Job Summary

The SMT Principal Engineer I at Jabil, Inc. is a senior technical contributor responsible for leading advanced surface mount technology (SMT) process development, optimization, and continuous improvement initiatives across multiple manufacturing lines to ensure high-quality and efficient production of complex electronic assemblies.

Job Responsibilities

- Lead the development, implementation, and optimization of SMT processes, including paste printing, pick-and-place FUJI, reflow soldering, and post-reflow inspection (AOI, X-ray).

- Conduct in-depth analysis of SMT process data, identifying root causes of defects and implementing effective corrective and preventive actions.

- Develop and qualify new SMT equipment, materials, and processes, ensuring seamless integration into existing production environments.

- Provide expert technical guidance and mentorship to junior engineers and production teams on SMT best practices, troubleshooting, and process control.

- Collaborate with design engineering, supply chain, and quality departments to ensure manufacturability (DFM) of new products and resolve SMT-related design issues.

- Drive continuous improvement projects utilizing methodologies such as Six Sigma, Lean Manufacturing, and SPC to enhance SMT yield, throughput, and reliability.

- Author and maintain comprehensive SMT process documentation, including work instructions, process specifications, and failure analysis reports.

- Evaluate and implement new SMT technologies and industry trends to maintain Jabil's competitive edge and address evolving product requirements.

- Lead efforts in root cause analysis for complex SMT failures, implementing robust solutions to prevent recurrence.

- Represent Jabil in technical discussions with customers and suppliers regarding SMT process capabilities and new product introductions.

Job Qualifications

- Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.

- 8-12 years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.

- Strong Knowledge of FUJI Setup, Nexim and Valor

- Demonstrated expertise in SMT equipment operation, programming, and maintenance, including printers, pick-and-place machines (e.g., Fuji, Programming, etc.), reflow ovens, and inspection systems (AOI, SPI, X-ray).

- In-depth knowledge of various soldering technologies, solder paste chemistries, and component packaging.

- Proven track record of leading process improvement projects and achieving significant yield and cost reductions.

- Strong analytical and problem-solving skills with a data-driven approach to decision-making (e.g., SPC, DOE).

- Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and external stakeholders.

- Proficiency in statistical analysis software (e.g., Minitab, JMP) and CAD software for DFM analysis.

- Familiarity with industry standards such as IPC-A-610 and J-STD-001.

- Ability to work independently and manage multiple complex projects simultaneously.

Job Summary

The SMT Engineering Tech will be responsible for supporting the surface mount technology (SMT) production lines, ensuring efficient operation, high-quality output, and continuous improvement through troubleshooting, maintenance, and process optimization.

Job Responsibilities

- Perform set-up, operation, and troubleshooting of SMT equipment including pick-and-place machines, reflow ovens, screen printers, and automated optical inspection (AOI) systems.
- Monitor SMT production processes to identify and resolve issues related to component placement, solder paste application, and reflow profiles.
- Conduct preventative maintenance and calibration on SMT machinery to ensure optimal performance and minimize downtime.
- Assist engineers in the development and implementation of new SMT processes, equipment, and materials.
- Interpret and analyze SMT process data to identify trends, root causes of defects, and areas for improvement.
- Provide technical support to production operators, offering guidance on best practices and troubleshooting techniques.
- Participate in continuous improvement initiatives, including lean manufacturing and Six Sigma methodologies, to enhance SMT line efficiency and product quality.
- Maintain accurate records of equipment maintenance, process parameters, and production issues.
- Adhere to all safety protocols and quality standards within the SMT department.

Job Qualifications

- Associate's degree in Electrical Engineering Technology, Electronics, or a related field; or equivalent practical experience.
- Minimum of 2-4 years of experience working with SMT production lines and equipment.
- Strong understanding of SMT processes, including solder paste deposition, component placement, reflow soldering, and AOI.
- Proficiency in operating and troubleshooting various SMT equipment (e.g., Fuji, MyData, Universal, MPM, DEK, Koh Young, Mirtec).
- Ability to read and interpret technical drawings, schematics, and process specifications.
- Excellent problem-solving skills and a methodical approach to troubleshooting.
- Strong communication and interpersonal skills to effectively collaborate with engineers and production teams.
- Ability to work independently and as part of a team in a fast-paced manufacturing environment.
- Familiarity with IPC standards (e.g., IPC-A-610) is a plus.

SUMMARY
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

LEADERSHIP AND MANAGEMENT RESPONSIBILITIES

Recruitment and Retention:
· Recruit and interview Process Technicians.
· Communicate criteria to recruiters for Process Technician position candidates.
· Coach technicians in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements.

Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor Process Technicians to deliver excellence to every internal and external customer.

Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.

Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly.

TECHNICAL MANAGEMENT RESPONSIBILITIES

· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· Provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.

MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience

LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.

MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.

REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.

WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.

Job Summary

The SMT Process Engineer IV is a senior-level technical expert responsible for optimizing and maintaining surface mount technology (SMT) processes to ensure high-quality, efficient, and cost-effective electronic assembly. This role involves advanced troubleshooting, process development, and continuous improvement initiatives across multiple SMT lines, often acting as a lead or mentor within the engineering team. Job Responsibilities

• Lead the development, implementation, and optimization of complex SMT processes, including stencil printing, pick-and-place FUJI, reflow soldering, and automated optical inspection (AOI).

• Conduct advanced root cause analysis and implement corrective actions for SMT process defects (e.g., shorts, opens, voids, component placement issues) using statistical process control (SPC) and other analytical tools.

• Design and execute experiments (DOE) to improve SMT process robustness, yield, and throughput, focusing on new product introduction (NPI) and existing product enhancements.

• Collaborate with design engineering, manufacturing, and quality teams to ensure manufacturability (DFM) and resolve complex technical issues related to SMT assembly.

• Develop and maintain comprehensive process documentation, work instructions, and training materials for SMT operators and technicians.

• Evaluate and recommend new SMT equipment, materials, and technologies to enhance capabilities and improve manufacturing efficiency.

• Provide technical mentorship and guidance to junior engineers and manufacturing personnel on SMT best practices and problem-solving techniques.

• Drive continuous improvement projects using Lean manufacturing and Six Sigma methodologies to reduce waste and increase productivity within SMT operations.

• Monitor key performance indicators (KPIs) for SMT processes and present findings and recommendations to management.

• Ensure compliance with all relevant industry standards, safety regulations, and quality management systems (e.g., ISO, IPC).

Job Qualifications

• Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.

• 8+ years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.

• Expert-level knowledge of SMT equipment (e.g., printers, pick-and-place machines, reflow ovens, AOI/SPI) from various manufacturers (e.g., Fuji, Universal, Koh Young, Agilent).

• Deep understanding of IPC-A-610 and J-STD-001 standards.

• Proficiency in statistical process control (SPC), design of experiments (DOE), and advanced problem-solving methodologies (e.g., 8D, Six Sigma).

• Strong analytical skills with the ability to interpret complex data and make data-driven decisions.

• Demonstrated ability to lead technical projects and drive process improvements.

• Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and mentor others.

• Experience with CAD/CAM software for SMT programming and DFM analysis is a plus.

• Ability to work effectively in a fast-paced, dynamic manufacturing environment.

Job Summary
The SMT Engineering Tech will be responsible for supporting the surface mount technology (SMT) production lines, ensuring efficient operation, high-quality output, and continuous improvement through troubleshooting, maintenance, and process optimization.
Job Responsibilities
Perform set-up, operation, and troubleshooting of SMT equipment including pick-and-place machines, reflow ovens, screen printers, and automated optical inspection (AOI) systems.
Monitor SMT production processes to identify and resolve issues related to component placement, solder paste application, and reflow profiles.
Conduct preventative maintenance and calibration on SMT machinery to ensure optimal performance and minimize downtime.
Assist engineers in the development and implementation of new SMT processes, equipment, and materials.
Interpret and analyze SMT process data to identify trends, root causes of defects, and areas for improvement.
Provide technical support to production operators, offering guidance on best practices and troubleshooting techniques.
Participate in continuous improvement initiatives, including lean manufacturing and Six Sigma methodologies, to enhance SMT line efficiency and product quality.
Maintain accurate records of equipment maintenance, process parameters, and production issues.
Adhere to all safety protocols and quality standards within the SMT department.

Job Qualifications
Associate's degree in Electrical Engineering Technology, Electronics, or a related field; or equivalent practical experience.
Minimum of 2-4 years of experience working with SMT production lines and equipment.
Strong understanding of SMT processes, including solder paste deposition, component placement, reflow soldering, and AOI.
Proficiency in operating and troubleshooting various SMT equipment (e.g., Fuji, MyData, Universal, MPM, DEK, Koh Young, Mirtec).
Ability to read and interpret technical drawings, schematics, and process specifications.
Excellent problem-solving skills and a methodical approach to troubleshooting.
Strong communication and interpersonal skills to effectively collaborate with engineers and production teams.
Ability to work independently and as part of a team in a fast-paced manufacturing environment.
Familiarity with IPC standards (e.g., IPC-A-610) is a plus.

Jabil   is   seeking a Site Engineering Manager to lead industrial engineering, facilities engineering, and site infrastructure for a fast ‑ growing electronics manufacturing operation. This leader will drive production efficiency, equipment reliability, and site readiness across high ‑ mix/high ‑ volume PCB assembly and secondary processes.  
 
Lead and develop a multidisciplinary engineering team, building technical capability, coaching future leaders, and fostering a culture of continuous improvement.  

~ Oversee process engineering across SMT lines, secondary processes (e.g., conformal coating, selective coating, potting), and automated inspection systems (AOI/AXI, Neptune, etc.).  

~ Optimize   production layouts, workflows, and capacity to support throughput, cost, and quality targets.  

~ Direct facilities operations, including preventive maintenance, building infrastructure, utilities, space planning, and site expansion projects.  

~ Ensure safety, environmental compliance, and readiness of all site systems supporting electronics manufacturing.  

~ Manage engineering budgets, capital planning, and resource allocation, understanding how engineering decisions influence productivity, cost structure, and P&L performance.  

~ Partner cross ‑ functionally with Operations, Quality, Supply Chain, and EHS to support scalable growth and new product introduction.  

 
Bachelor’s degree in engineering or related field, plus 5-8 years’ related experience and 2-3 years in a management role   required , or equivalent combination of education and experience.  

~ Experience in electronics manufacturing environments with exposure to SMT assembly, PCBA flow, coating applications, and automated inspection technologies.  

~ Strong foundation   in industrial engineering principles, facilities management, and continuous improvement methodologies.  

~ Proven ability to develop people, strengthen engineering organizations, and build succession pipelines.  

~ Analytical, data ‑ driven decision   maker   with awareness of cost drivers, ROI, and   financial impact   of engineering initiatives.  

~

SUMMARY
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
Recruitment and Retention:
· Recruit and interview Process Technicians.
· Communicate criteria to recruiters for Process Technician position candidates.
· Coach technicians in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements.
Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor Process Technicians to deliver excellence to every internal and external customer.
Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly.
TECHNICAL MANAGEMENT RESPONSIBILITIES
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· Provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.

Job Title: Lead Electrical CAD Designer

Job Family: General Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.

What will you do?

- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed

- Participating in design reviews to ensure accuracy and compliance with requirements

- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control

- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards

- Work closely with engineers and other designers to meet product specifications and performance requirements

- Modify and revise designs to correct operating deficiencies or to reduce production problems

- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.

- Check and validate designs to ensure they meet required quality and safety standards

- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications

- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications

- Designing and creating schematic PLC input/output connections.

- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.

- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team

- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration

- Capable of creating a Bill of Materials (BOM) for release to manufacturing

- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers

- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs

- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required

Experience:

- 6-8 years of experience in electrical design within the power distribution or data center industry.

- Proven experience as a CAD designer, preferably in an electrical engineering environment.

- Proficiency in CAD software (AutoCAD Electrical, Revit).

- Strong understanding of electrical systems, integration strategy, and system coordination

- Excellent problem-solving skills and attention to detail

- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently

Knowledge, Skills, Abilities:

- Strong knowledge of electrical design, manufacturing processes, and material properties.

- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.

- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.

- Excellent interpersonal and communication skills.

- Creative, self-motivated, accountable, and team-oriented.

- Able to work independently with minimal oversight.

- Effective at presenting information and responding to management, clients, and public queries.

- Capable of influencing others and sharing best practices.

- Comfortable working as part of a global team.

- Capable of assessing projects, articulating risks, and developing project milestones.

- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.

JOB SUMMARY

ESSENTIAL DUTIES AND RESPONSIBILITIES

· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS

· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Remote working/work at home options are available for this role.

Job Title: Sr. Principal Electrical Design Engineer

Job Family: Electrical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

Jabil has an exciting opportunity for a highly experienced and technically proficient Principal Electrical Engineer to engage in the design, fabrication, and integration of electrical systems for data center power and cooling products, as well as factory enablement projects. This role includes full-stack electrical design from generator systems to AI rack integration zones, with a focus on PDUs, UPS systems, MV/HV power distribution, phased power infrastructure, and controls architecture. The ideal candidate will bring deep technical expertise and a passion for delivering scalable, reliable, and compliant infrastructure solutions.

The Sr. Principal Electrical Integration Engineer will manage and oversee the electrical systems essential for the data center, energy storage systems, and HVAC applications. This role will involve developing specifications, selecting key components, routing wires and cables, establishing connections, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.

What will you do?

Product & System Design:

- Knowledge of high-efficiency power conversion and point-of-load regulation for AI/ML server racks (BBU, rPDU).
- Understanding of rack power zoning, load balancing, and redundancy strategies for tiered compute workloads.
- Ensure electrical systems are properly integrated into fabricated enclosures and structural assemblies.
- Lead the electrical design and integration of UPS systems, power conversion units, and safety interlocks.
- Develop and maintain single-line and three-line diagrams for power distribution systems, ensuring clarity, accuracy, and compliance with NEC, IEEE, and UL standards.
- Design and validate three-phase power systems, including load balancing, fault protection, and redundancy strategies for high-availability environments.
- Engineer and integrate medium-voltage (MV) and high-voltage (HV) power distribution components such as switchgear, transformers, busways, and protective relays.
- Specify and qualify electrical components including circuit breakers, contactors, CTs/PTs, surge protection devices, isolation switches for MV/HV applications and the design and development of wiring harnesses

Factory & Facility Integration:

- Design end-to-end electrical distribution systems from generator and utility interface to AI rack integration zones.
- Coordinate with cross functional teams to ensure electrical infrastructure aligns with facility layout, safety codes, and operational requirements.
- Plan and implement power redundancy, load segmentation, and scalable distribution architectures to support high-density compute environments.
- Ensure proper grounding, EMI shielding, and thermal management across all facility-level electrical systems.

Fabrication & Implementation:

- Define fabrication processes including panel building, cable routing, and system integration, ensuring manufacturability and serviceability.
- Perform electrical load calculations, short-circuit analysis, arc flash studies, and thermal modeling using tools such as ETAP, SKM PowerTools, or EasyPower.
- Lead design reviews, risk assessments, and validation testing to ensure compliance with UL, IEC, NEC, CE, RoHS, and REACH standards.
- Interface with suppliers and customers resolve fabrication and quality issues, and ensure adherence to specifications.
- Support prototype builds, field deployments, and customer engagements to gather feedback and refine designs.

Controls Architecture:

- Develop and implement electrical controls architecture for power and cooling systems, including PLCs, SCADA integration, and remote monitoring capabilities.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Collaborate with software and automation teams to ensure seamless integration of control systems with facility and product-level infrastructure.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.

Leadership & Documentation:

- Develop and maintain engineering documentation including BOMs, test procedures, and engineering change orders (ECOs).
- Mentor junior engineers and provide technical leadership across cross-functional teams.
- Drive continuous improvement initiatives focused on cost reduction, design for manufacturability (DFM), and product scalability

How will you get here?

Education:

- Bachelor’s Degree in Electrical Engineering or related engineering discipline.

Experience:

- 10+ years of experience in electrical design and fabrication, with a focus on data center or industrial power systems
- Proficiency in ECAD tools (AutoCAD Electrical, EPLAN, SolidWorks Electrical) and integration with mechanical CAD platforms
- Strong understanding of MV/HV power distribution, lithium-ion UPS systems, and three-phase electrical infrastructure
- Experience with electrical analysis tools (ETAP, SKM PowerTools, EasyPower)
- Proven experience in facility-level electrical design and construction support and Excellent leadership, communication, and cross-functional collaboration skills

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail

Preferred Qualifications: 

- Master’s Degree in Electrical Engineering
- Active Professional Engineer (PE) license
- Experience with data center infrastructure: UPS systems, switchgear, CRAC units, and PDUs
- Familiarity with global compliance standards: UL, CE, RoHS, REACH, and IEEE.
- Hands-on experience with panel fabrication, wiring, and system integration
- Knowledge of thermal and mechanical constraints in electrical enclosure design and experience working with global suppliers and contract manufacturers
- Experience in WindChill and DevOps
Remote working/work at home options are available for this role.

Now offering $5,000 sign on bonuses for new hires joining Jabil as a new Manufacturing Engineering Technician

We’re expanding into a full 24/7 operation and are hiring across multiple roles and experience levels. Our 12‑hour overnight shift is ideal for someone who enjoys a more independent work environment with more days off each week. You’ll benefit from premium shift differentials, cross‑training opportunities, and the chance to shape processes on a growing team. If you’re someone who prefers working nights or wants to maximize earning potential while enjoying a schedule with fewer total days giving you additional full days off during the week to spend with family, pursue hobbies, or rest, this could be a great fit for you.

Currently hiring Technicians for the below shifts.

Note: Based on the 2-week rotating shift pattern, employees will be scheduled to work 36 hours one week, and 48 hours on the alternate week. In this alternate week, employees will be receiving 8 hours of overtime, resulting in 16 hours of overtime pay in a month.

Shift A– 6pm to 6am 15% shift differential pay

Week 1: Tuesday, Thursday, and Friday

Week 2: Monday, Wednesday, Saturday and Sunday

Shift B – 6pm to 6am 15% shift differential pay

Week 1: Monday, Wednesday, Saturday and Sunday

Week 2: Tuesday, Thursday, and Friday

Shift D – 6pm to 6am 15% shift differential pay

Week 1: Tuesday, Thursday, and Friday

Week 2: Monday, Wednesday, Saturday and Sunday

How will you make an impact!
In this key Manufacturing Engineer Technician onsite role, you will perform preventative maintenance, calibration, change overs in Z-prep area and perform preventive maintenance for tooling (SMT & BE process) and other specialty support equipment used in the manufacturing process.

Location: This role will be based on-site at one of our St. Petersburg Florida Facilities located in Seminole, FL specializing in Renewable Energy

What will you do?

Key Responsibilities

- Operate, monitor, and adjust SMT equipment while ensuring high quality and process stability.

- Perform setups, changeovers, and material verification for each process step.

- Conduct preventive and corrective maintenance on:

- Laser marking systems

- Glue dispensing machines (CAMALOT)

- Screen printers (DEK)

- SPI systems (KOH YOUNG)

- Pick & place machines (FUJI NXT, AIM)

- Reflow ovens (ITW/VITRONIC)

- Troubleshoot and resolve process issues related to solder paste printing, component placement, inspection, and reflow profiling.

- Create, modify, and optimize SMT programs (FUJI, CAMALOT, DEK, etc.).

- Document downtime, maintenance activities, root cause analysis, and improvements.

- Collaborate with Engineering, Quality, and Production to improve OEE, yields, CP/CPK, and reduce rework.

- Ensure compliance with safety standards, ESD controls, and manufacturing best practices.

- Cover overtime requirements as needed.

How will you get here?

Education and Experience:
- Electronics Industry Experience

- High School Diploma or GED preferred not required or equivalent - experience.

- Six months of demonstrated experience, ideally 2 plus years.

- Must have experience with at least one of the below:

- Laser marking systems

- Glue dispensing machines (CAMALOT)

- Screen printers (DEK)

- SPI systems (KOH YOUNG)

- Pick & place machines (FUJI NXT, AIM)

- Reflow ovens (ITW/VITRONIC)

Why Join Jabil?

- Be part of a mission-critical team supporting Renewable Energy innovation.

- Gain hands-on experience with high-precision, advanced technologies.

- Work in a culture focused on quality, safety, and continuous improvement.

- Competitive compensation and a comprehensive benefits package.
Remote working/work at home options are available for this role.

Job Title: Principal Electrical Design Engineer

Job Family: Electrical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.

This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.

What will you do?

- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems

How will you get here?

Education:

- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.

Experience:

- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:

- PLC programming (Allen-Bradley, Siemens, Schneider Electric)

- Building Management Systems (BMS) integration and optimization

- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics

- Automatic Transfer Switches (ATS) control and failover logic

- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems

Preferred Qualifications: 

- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.

Job Title: Principal Electrical Controls Engineer

Job Family: Electrical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.

This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.

What will you do?

- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.

- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.

- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.

- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.

- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.

- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.

- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.

- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.

- Drive the development of system-level simulations and digital twins to validate control strategies before deployment

- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools

- Establish design patterns and best practices for modular and reusable control logic across projects

- Lead root cause analysis and resolution of complex control system issues during commissioning and operations

- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency

- Develop and maintain documentation for system architecture, control logic, and operational procedures

- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure

- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints

- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines

- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems

How will you get here?

Education:

- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.

Experience:

- 8+ years pf experience in control system design and implementation

- Deep expertise in the following:

- PLC programming (Allen-Bradley, Siemens, Schneider Electric)

- Building Management Systems (BMS) integration and optimization

- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics

- Automatic Transfer Switches (ATS) control and failover logic

- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)

- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)

- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight as part of a global team

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices while mentoring less experienced engineers

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Excellent problem-solving skills and attention to detail

- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus

- Experience with hyperscale or colocation data center environments

- Familiarity with low and medium-voltage systems

Preferred Qualifications: 

- Master’s Degree in Electrical Engineering or a relevant engineering discipline

- Active Professional Engineer (PE) license

- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.

- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.

Job Title: Lead Electrical CAD Designer

Job Family: General Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.

What will you do?

- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed

- Participating in design reviews to ensure accuracy and compliance with requirements

- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control

- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards

- Work closely with engineers and other designers to meet product specifications and performance requirements

- Modify and revise designs to correct operating deficiencies or to reduce production problems

- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.

- Check and validate designs to ensure they meet required quality and safety standards

- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications

- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications

- Designing and creating schematic PLC input/output connections.

- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.

- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team

- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration

- Capable of creating a Bill of Materials (BOM) for release to manufacturing

- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers

- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs

- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required

Experience:

- 6-8 years of experience in electrical design within the power distribution or data center industry.

- Proven experience as a CAD designer, preferably in an electrical engineering environment.

- Proficiency in CAD software (AutoCAD Electrical, Revit).

- Strong understanding of electrical systems, integration strategy, and system coordination

- Excellent problem-solving skills and attention to detail

- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently

Knowledge, Skills, Abilities:

- Strong knowledge of electrical design, manufacturing processes, and material properties.

- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.

- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.

- Excellent interpersonal and communication skills.

- Creative, self-motivated, accountable, and team-oriented.

- Able to work independently with minimal oversight.

- Effective at presenting information and responding to management, clients, and public queries.

- Capable of influencing others and sharing best practices.

- Comfortable working as part of a global team.

- Capable of assessing projects, articulating risks, and developing project milestones.

- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.

Job Title: Lead Electrical CAD Designer

Job Family: General Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.

What will you do?

- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed

- Participating in design reviews to ensure accuracy and compliance with requirements

- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control

- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards

- Work closely with engineers and other designers to meet product specifications and performance requirements

- Modify and revise designs to correct operating deficiencies or to reduce production problems

- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.

- Check and validate designs to ensure they meet required quality and safety standards

- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications

- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications

- Designing and creating schematic PLC input/output connections.

- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.

- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team

- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration

- Capable of creating a Bill of Materials (BOM) for release to manufacturing

- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers

- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs

- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required

Experience:

- 6-8 years of experience in electrical design within the power distribution or data center industry.

- Proven experience as a CAD designer, preferably in an electrical engineering environment.

- Proficiency in CAD software (AutoCAD Electrical, Revit).

- Strong understanding of electrical systems, integration strategy, and system coordination

- Excellent problem-solving skills and attention to detail

- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently

Knowledge, Skills, Abilities:

- Strong knowledge of electrical design, manufacturing processes, and material properties.

- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.

- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.

- Excellent interpersonal and communication skills.

- Creative, self-motivated, accountable, and team-oriented.

- Able to work independently with minimal oversight.

- Effective at presenting information and responding to management, clients, and public queries.

- Capable of influencing others and sharing best practices.

- Comfortable working as part of a global team.

- Capable of assessing projects, articulating risks, and developing project milestones.

- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.

Job Title: Principal Mechanical Design Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

- Lead mechanical design reviews and contribute to cross-functional design validation efforts.

- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

- Conduct root cause analysis and corrective actions for mechanical failures or field issues.

- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience:

- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

- Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices

- Comfortable working as part of a global team

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Able to mentor less experienced engineers

- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering

- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

- Active Professional Engineer (PE) license.

- Knowledge of regulatory and safety standards applicable to data center infrastructure.

- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.

**This position supports hybrid work schedule depending on organization needs.**

How will you make an impact?

We are looking for a Principal Thermal Rack Engineer within the Intelligent Infrastructure Segment to drive advanced cooling solutions for high-performance computing systems. This role involves incorporating thermal components such as direct liquid cooling (DLC) systems, coolant distribution units (CDUs), and manifolds into network and server racks (EIA 19” and ORv3). You will leverage CFD tools to perform rack and system-level thermal and fluid analysis, ensuring optimal flow distribution, pressure drop, and temperature performance. Additionally, you will create 3D CAD designs for seamless hardware integration, lead validation testing, and resolve thermal or flow issues through root cause analysis and corrective actions. Collaboration with cross-functional teams, customers, and global vendors is essential to align thermal architectures with overall system design and international standards.

What will you do?

- Lead the end-to-end integration and testing of rack thermal solutions, including liquid cooling systems in varying form factors and product lines.
- Use CFD tools (FloTherm or Macroflow) to perform switch, rack, and system-level thermal/fluid analysis (flow distribution, pressure drop, and temperature profiling).
- Design and optimize thermal components using 3D CAD (Creo or SolidWorks) to support seamless hardware integration and testing.
- Participate in customer engagements and site visits to understand and document deployment constraints and gather feedback for design improvements.
- Partner with factory teams to ensure racks are built with proper airflow, hose routing, and thermal safeguards, while establishing best practices that improve build consistency across deployments.
- Collaborate with Architects/Compliance/Reliability and global vendors to align thermal architectures with total system design and international data center/thermal/mechanical standards (e.g., UL, OCP, ASHRAE, ISTA, ASTM, NEBS).
- Conduct thermal, mechanical, and reliability testing, analyzing airflow, coolant flow rates, pressure drops, and structural integrity to ensure compliance with the end-users’ specifications.
- Develop and maintain design documentation including BOMs, wetted materials compliance, test plans, and engineering change orders (ECOs).
- Manage relationships with mechanical/thermal component vendors to build out a robust partner ecosystem consisting of racks, CDUs, hoses, manifolds, QDs, and cold plates.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (e.g., in-row cooling, in-rack cooling, rear door heat exchangers).
- Conduct root cause analysis and corrective actions for mechanical and thermal failures or field issues.
- May perform other duties and responsibilities as assigned.

How will you get here?

Education:

- Bachelor’s Degree in Mechanical/Thermal Engineering, Systems Engineering, or related field is required

Experience:

- Minimum of 7+ years of experience in thermal/mechanical systems integration
- 3+ years of specific experience in rack-scale thermal design and analysis
- Strong understanding of mechanical systems, integration strategies, and large-scale program management
- Familiarity with server design, heatsinks, cold plates, hoses, and blind-mate connectors
- Proficiency in CFD simulation (e.g. ANSYS, 6Sigma, etc.) and 3D modeling software (e.g. SolidWorks, Creo)
- Hands-on experience with thermal chambers, fans, and coolant
- Excellent English communication skills (verbal and written) with strong technical leadership capabilities

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Capable of assessing projects, articulating risks, and developing project milestones
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management and customers
- Capable of influencing others and sharing best practices
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering, Systems Engineering or related field is preferred
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license preferred.
- Hands-on experience with prototype fabrication and testing; experience working with global suppliers and contract manufacturers a plus.

About Jabil’s Intelligent Infrastructure Group:

- Headquartered in Austin, TX, with a flagship facility located near The Domain and the Austin FC stadium
- Growing rapidly, with a team of more than 100 employees in Austin (500+ worldwide) and significant expansion planned through 2026
- Generated over $12 billion in FY25 revenue, driven largely by partnerships with major hyperscale customers
- Delivers cutting‑edge engineering, supply chain, and manufacturing solutions that power the world's AI infrastructure and global data center ecosystems

As part of the total rewards package, this position is eligible for:

- Annual bonus opportunity
- Medical, dental, and vision insurance plans
- Paid time off (PTO)
- 4 weeks of paid parental leave
- 11 company-paid holidays (9 fixed holidays and 2 optional floating holidays), subject to change yearly
- 401(k) retirement plan
- Employee stock purchase plan
Remote working/work at home options are available for this role.