Engineering Jobs in New York Remote
676 positions found — Page 11
Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility. Assists in the planning and installation of diagnostic and therapeutic imaging equipment.
ESSENTIAL FUNCTIONSKnows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.
Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment.
Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas: CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.
Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair of all radiological and general medical equipment.Recommend radiology related test equipment and spare equipment parts to the CE Manager.
Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.
Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances. Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment. Also, provides assistance and training to Biomedical Equipment Techs I, IIand Senior Biomed as assigned.
Provides on-call service coverage after normal business hours on a rotating basis, as assigned.
Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.
Participates in teamwork by: Keeping others informed. Initiating group decision-making. Working to accomplish team objectives and projects. Seeking feedback about one’s effectiveness as a team member.
Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.
May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.
Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.
MINIMUM QUALIFICATIONS:
Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience. Certified Radiology Equipment Service (CRES) preferred but not required.
Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc. Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.
Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.
Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).
Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.
Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.
Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition. Follow complex written instructions, perform tasks and document actions taken to restore service.
Must be comfortable operating in a collaborative, shared leadership environment.
Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .
Strong communication and inter-personal skills are required to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.
PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS
Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.
Ability to mentally concentrate while being subject to interruptions and changing work priorities.
Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices
Must be able to hear speech, distinguish sounds, and speak.
Must have near vision, far vision, depth perception, and be able to distinguish colors.
Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.
Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.
Must be able to push or pull over 100 pounds frequently (20% of the time).
Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.
Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.
Description:
BASIC PURPOSE:
- Create detailed cost estimates for the creation of customer quotations for injection mold tooling, injection molded products, and value added assemblies.
ESSENTIAL RESPONSIBILITIES:
- Estimating & Quoting
o Prepare detailed cost estimates for injection molded parts, including:
Tooling (new molds, modifications, transfers)
Piece-part pricing
Secondary operations (assembly, pad printing, ultrasonic welding, etc.)
o Analyze customer RFQs, drawings, CAD models, and specifications
o Develop pricing based on material costs, cycle time, press size, labor, overhead, and margin targets
o Support quick-turn and formal quote requests
- Engineering & Technical Analysis
o Review part designs for manufacturability (DFM)
o Estimate mold complexity, cavitation, hot runner vs. cold runner, and tooling lead times
o Recommend process assumptions, material alternatives, and cost-reduction opportunities
o Collaborate with tooling vendors and internal mold design teams
- Cross-Functional Collaboration
o Work with sales to clarify customer requirements and pricing strategy
o Coordinate with manufacturing, tooling, and supply chain teams to validate assumptions
o Support customer technical discussions as needed
- Cost Management & Data Accuracy
o Maintain estimating models, cost databases, and historical pricing
o Track quote accuracy and provide post-launch cost feedback
o Assist with cost-down initiatives and re-quotes for production programs
Requirements:
QUALIFICATIONS:
Required
- 3+ years of experience in injection molding estimating, process engineering, or manufacturing engineering
- Strong understanding of injection molding processes, materials, and tooling
- Ability to interpret engineering drawings and 3D CAD models
- Proficiency with Excel and estimating or ERP systems
- Strong analytical and communication skills
Preferred
- Experience estimating multi-cavity, hot runner, or high-volume production tools
- Familiarity with automotive, medical, consumer, or industrial molded products
- Experience working with domestic and offshore tooling suppliers
- Background in mold design, processing, or project management
HVAC/Plumbing Engineer
Experience Required: 3–5 Years Salary: $70,000 – $85,000 (Commensurate with experience)
About the Organization
Founded in 2013, our organization is a full-service engineering firm specializing in Mechanical, Electrical, Plumbing, Fire Protection, and Fire Alarm systems. We pride ourselves on being a high-growth, agile organization with a "zero-bureaucracy" philosophy. Our team is close-knit, friendly, and dedicated to maintaining a peaceful, collaborative work environment. We offer a wide range of services, including energy recovery systems, radiant flooring, complex site and sewer connections, and detailed construction administration.
The Role
We are seeking a proactive and independent HVAC/Plumbing Engineer to join our growing team. Unlike roles at larger firms where you may act as an assistant, this position requires an engineer with "hands-on" experience capable of designing systems independently. You will manage projects across multiple disciplines internally while serving as the primary point of coordination for architects, contractors, and local city agencies.
Key Responsibilities
- Engineering Design: Independently design HVAC and Plumbing systems using AutoCAD, ensuring all designs meet project specifications and applicable energy conservation codes.
- Project Management: Handle multiple projects simultaneously, overseeing the project lifecycle from initial design through to construction administration.
- Internal Coordination: Lead coordination between mechanical, electrical, and plumbing disciplines within the firm.
- External Liaison: Coordinate directly with external stakeholders, including architects and contractors, and navigate approval processes with relevant city agencies.
- Construction Administration: Manage RFIs, submittals, amendments, as-builts, and conduct field visits and punch lists.
Requirements
- Professional Experience: 3–5 years of professional MEP design experience.
- Regional Expertise: A minimum of 1 year of experience specifically on projects based in our major metropolitan area is required.
- Technical Mastery: Must be highly proficient in AutoCAD and able to design HVAC systems independently rather than as an assistant to a lead engineer.
- Code Knowledge: Strong familiarity with local energy conservation codes and building regulations.
- Multidisciplinary Skills: While HVAC and Plumbing are the core focus, additional experience in Sprinkler or Electrical systems is a significant plus.
- Soft Skills: We are looking for professionals who are easy to work with, friendly, and thrive in a supportive, close-knit team environment.
Benefits & Compensation
- Salary Structure: $70,000 – $85,000 base. Higher compensation is available for candidates with broader multi-discipline design experience and additional years of tenure.
- Vacation: Generous vacation days and closure on all major holidays.
- Future Growth: We are a growing company and are actively working toward implementing a group medical plan in the near future.
- Environment: A supportive, low-bureaucracy office where your contributions are highly visible and valued.
I’m working on two Product Manager opportunities with a firm’s innovation studio that incubates and launches new digital products across areas like FinTech, LegalTech, and HRTech. Interested candidates can reach me @
Product Manager (Digital /AI focused)
Location: New York, NY 10011 (Hybrid 3days/Week)
Fulltime opportunity.
No 3rdparty resumes
W2 candidates only
The group operates much like an internal venture builder—identifying market opportunities, building MVPs, and bringing client-facing solutions to market.
They tend to look for entrepreneurial product managers—people who have launched digital products for external users and who enjoy building new things from scratch. That can include side projects, startup work, or even products developed in academic environments. One current product is focused on Tax Research to automate work for jr tax advisors. Build and prove internally then launch to clients at enterprise scale. Products have been deployed to Disney, US Airforce, etc.
A few things they typically looking for:
Bachelor’s degree in a relevant discipline
Building revenue generating SaaS products
Last 1-2 years been building internal products that can become SaaS products. Like to use EY employees at test cases first
Minimum 7+ years of solid product management experience
Experience working with generative AI, on mobile product development, and on customer-facing digital products
Experience launching digital products used by external customers
Exposure to AI or generative AI capabilities within products
Strong product discovery skills (personas, experimentation, user feedback)
Comfortable working closely with designers and engineering teams
Obsessive attention to detail and organizational skills
Ability to learn quickly, and execute independently with minimal guidance
Excellent oral, written, and visual communication and presentation skills
They’re hiring for two roles—a Product Manager and a more Senior Product Manager / Lead within this innovation studio environment.
Would you be open to having a quick chat about it?
#ProductManager #Customerfacing #Saas #Digitaltranformations #GenerativeAI #Hybrid
Summary
Seeking an experienced Deputy Program Manager for Construction to support large-scale design-build projects. This role is responsible for overseeing program execution, coordinating construction activities, and ensuring projects are delivered on schedule, within budget, and aligned with overall program objectives.
Key Responsibilities
- Lead program-level coordination of construction activities across multiple projects.
- Oversee implementation of program policies, procedures, and standards.
- Serve as primary liaison between internal teams, clients, and external stakeholders.
- Manage contract scope, budget, staffing, and overall project performance.
- Lead multidisciplinary teams including project managers, inspectors, schedulers, estimators, and safety personnel.
- Coordinate closely with design, program controls, and stakeholder groups.
- Identify risks and develop mitigation strategies to maintain project performance.
- Provide financial oversight including budgeting, cost tracking, and forecasting.
- Maintain regular reporting and communicate project status to leadership.
- Mentor staff and promote accountability, collaboration, and high performance standards.
Qualifications
- Bachelor’s degree in Construction Management, Engineering, or related field.
- 15+ years of construction experience, including 5+ years in a leadership role.
- Proven experience delivering large-scale, complex construction projects (high-rise preferred).
- Strong understanding of construction cost control, scheduling, estimating, procurement, and engineering principles.
- Ability to read and interpret contracts, drawings, specifications, and schedules.
- Strong leadership, communication, and stakeholder management skills.
- Proficiency with Microsoft Office and construction/project management software.
- Ability to perform in a fast-paced, team-oriented environment.
Preferred Experience
- Design-build project delivery experience.
- Experience working with public agencies or large, multi-stakeholder programs.
- Strong problem-solving, negotiation, and conflict resolution skills.
- Ability to build and maintain relationships across teams and stakeholders.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title: Senior Engineer, Global Services
- Hybrid Location: Medina, NY Duration: 12 Months Hours: 9 AM
- 5 PM Flexible on availability to be on-site, with someone who can work 1-2 days per week, Open to relocation and considering senior candidates.
must have the ability to travel Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: Applies a solid understanding of engineering and problem-solving theories/practices toward the development of new or enhanced products or processes.
Creates service deliverables and infrastructure required to support initial product launch and lifecycle management.
Capable of designing machine tooling, jigs, fixtures, gauges and equipment used in the servicing process.
Capable of checking designs and drawings against general standards, design requirements, geometric tolerances, drafting practices and the manufacturing process involved.
The work of the individual should be highly creative, of high quality and offer wide latitude for independent judgment and perception with a minimal amount of supervision.
Need not have any tools/ software experience, CAD would be a plus.
Medical background will be a plus any regulatory background will be good.
Someone who was worked with Engineers, multitasking will be a great fit.
Ambiguity, adapt, multi-task and works with lead engineer in projects.
Support the team of Product core and represent service operations and supply chain.
Will be in charge of Service change implementation.
Focuses on design changes, process changes.
Collaborates with Service Process, Engineers, Technicians, impact of changes.
Oversees Document Revision, Handle Change control, mentored and directed by team to tackle multiple product and project Essential Duties and Responsibilities: 1.
Creates new product development and lifecycle management service deliverables throughout the product lifecycle for medical device products involving hardware.
2.
Supports new product platform releases.
Develops and implements service training, test equipment, tools, spare parts, and service manuals / instructions.
3.
Evaluates / makes recommendations on product releases related to design for serviceability.
Creates (or modifies existing) servicing processes and manuals to support repair or refurbishment of fielded product at multiple global sites or in the field.
4.
Works closely with design team to select, develop, and implement technologies across all medical device development programs.
5.
Analyzes key servicing metrics to identify and implement opportunities for improvement in service process quality, cost, or product reliability.
6.
Coordinates information flow between corporate and local/regional teams.
7.
Owns Corrective and Preventive Actions related to the product(s) core team(s) supported, using sound root cause analysis.
8.
May represent Technical Services on new product development and/or lifecycle management core teams.
9.
May independently plan, schedule and lead cross-functional teams in detailed phases of the engineering work in a project.
10.
May approve the work of lower level engineers; may supervise other engineers or technicians Minimum Qualifications: 1.
Must be well versed in core engineering disciplines (e.g.
mechanical, electrical, software, systems engineering).
2.
Highly motivated self-starter who is able to work with minimal supervision.
3.
Must have good interpersonal and oral/written communication skills, good time management, and be capable of analyzing and solving technical problems through innovative thought and application of sound engineering principles and root cause analysis.
4.
Experience with change control methodologies and configuration management principles is a plus.
5.
Experience with test engineering and/or reliability engineering principles is a plus.
6.
Ability to exercise independent judgment and draw conclusions based on available information.
7.
Good understanding of GMP and quality system requirements.
Education and/or Experience: Bachelor's degree in a core engineering discipline (mechanical, electrical, software, systems, or mfg/process engineering) plus 3-5 years of experience.
Medical device experience or other regulated industry experience preferred.
Experience in the use of Lean Six Sigma tools highly desirable.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
GMP, Medical Device, Lean Six Sigma
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries regarding the following opportunity, please contact our Talent Specialist, Hema at (63 or Sri at (63 Title: Sr Software Quality Engineer
- Remote Duration: 6 Months Location: Remote Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: The main function of a quality engineer is to research and test the design, functionality and maintenance of products, equipment, systems and processes and develop quality standards.
A typical quality engineer has the ability to read and interpret blueprints, and evaluate product integrity and standards.
Job Responsibilities: Devises sampling procedures and designs and develops forms and instructions for recording, evaluating, and reporting quality and reliability data.
Establishes program to evaluate precision and accuracy of production equipment and testing, measurement, and analytical equipment and facilities.
May write training material and conduct training sessions on quality control activities.
May specialize in areas of quality control engineering, such as design, incoming material, process control, product evaluation, product reliability, inventory control, metrology, automated testing, software, research and development, and administrative application.
Skills: Creativity, verbal and written communication skills, analytical and problem solving ability.
Team player and detail oriented.
Basic ability to read and interpret blueprints, technical drawing, schematics and computer-generated reports.
Basic experience with computer applications and software related to engineering field, such as Computer Aided Design (CAD).
Education/Experience: Bachelor's degree in engineering required.
2-4 years experience required.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
Team Player, computer applications, Computer Aided Design (CAD), Creativity
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries regarding the following opportunity, please contact our Talent Specialist, Abdul at (224) 507-1295 Title: Training Coordinator
- Hybrid Duration: 12 Months Location: Charlotte, NC, Schedule: 3 days in office, 2 days remote Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Reports to: Manager, Customer Education Purpose of Position: The Global Marketing Customer Education and Programs Team is responsible for delivering best in class, industry-leading Marketing Programs and Customer Education.
These programs and trainings deliver product awareness, solutions, and services through both hands-on and virtual educational offerings extending Client's Customers and Program Members product preference and brand loyalty.
The Training Coordinator, Customer Education will be responsible for supporting Customer Education initiatives such as supporting program members, training/alliance partners, and other applicable customers in the In-Building, Data Center, and Carrier Markets.
This person will take direction from the Manager, Customer Education to develop the annual education plan for USCAN.
They will project lead the development of class content, marketing materials, and class scheduling to ensure that the education plan is aligned with business strategy and is successfully executed.
The Customer Education team has a global footprint, and this role will be expected to have a cross-regional approach to ensure trainings and content within is supported uniformly within each region.
We support each other collectively to assist in team development, cross training and execution of events is vital! Additionally, is the expectation for cross-functional team support for paid classes, hands-on seminars, and field-level events.
Experience in marketing, customer service, and event management is recommended.
Fiber optic knowledge and training experience is helpful.
Major Roles and Responsibilities Growth and maintenance for customer training program that promotes and supports global marketing initiatives across markets and solutions.
Collaborate with Channel Marketing, Regional Marketing, Sales Engineers, Product Line Managers, and Engineering Services to identify Customer Education needs and future opportunities with a specific market audience.
With the direction and strategy from the Manager, Customer Education, develop and project manage Training Events both live and virtual to support the overall In-Building Network (IBN), Data Center and Carrier (CN) Sales strategy.
Collaborate with subject matter expects in Systems Engineering, Field Engineering, Application Engineers, and Regional/Applications Marketing regarding content and instructional design and develop or source training content and curriculum.
Work with Engineering Services and Field Engineering to build and maintain product samples and equipment to support class curriculum.
Collaborate with Distribution Branch Managers and Sales Engineers nationwide to coordinate logistics for live education classes.
Build promotional campaigns through marketing tools such as social media, marketing automation software and traditional inbound and outbound campaigns to support promotion of customer education events.
Maintain certifications and customer/program education records and report on results from Customer Education program.
Work with event planning software (Cvent) to set up accurate event registration/promotion, registration and after event reporting.
Establish and build relationships with external suppliers as needed.
Operate within a specified customer education budget.
Be available to provide basic customer support for program members.
Help maintain and develop program databases and processes to continually improve the training program.
As a representative of Client Optical Communications, ensure that you convey the highest level of integrity in behavior and appearance and help to fulfill all customer expectations as a premier supplier.
Skill and Knowledge Requirements: Education Requirement: BS/BA Marketing, Communications, or equivalent degree Required Experience: 2 years in marketing, communications, event planning or related experience Experience with instruction or training coordination and/or delivery preferred Desire to work with and learn software and cloud applications Required Skills: Planning and organizing Strong interpersonal skills Data gathering and analysis Problem analysis and problem solving Attention to detail Resourcefulness Basic knowledge and understanding of fiber optic networks What type of software will be used? Presentation Software (PowerPoint/Presenter) Microsoft Office SharePoint Marketing Automation Software (Marketo) Webinar Delivery Systems (AdobeConnect and WebEx Event Center) Social Media Platforms (LinkedIn) Event Planning Software (Cvent) This position does not support immigration sponsorship.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
Planning and Organizing, Problem Analysis and Problem Solving, Data Gathering and Analysis
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hari at (224) 507-1278 Title: Mechanical Drafting Technician II
- Hybrid Location: Concord, NC Duration: 12 Months Base Schedule:Monday
- Friday, 8 AM
- 5 PM OT Required: 45 hours per week target Work Environment: Employment will be through a third party on a contract basis.
Contracts will be 1 year in length and are often extended with satisfactory performance and additional project workload.
Hybrid work schedule available (work from home 3-4 days per week) Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: As a member of a global drafting department you will assist in the creation, revision, and storage of electronic drawing files (Autodesk Inventor and AutoCAD) for custom designed process equipment located in numerous worldwide Client Optical Fiber and Cable manufacturing locations.
Primary responsibilities include assisting the area drafting lead with completing all required work to an engineering/development drawing set prior to release into the system (Autodesk Vault).
Typical tasks include creating 3D models and associated drawings or editing existing models/drawings all while ensuring they follow company drafting standards: detail, sheet metal, weldment, and assembly drawings are typical.
No new design activity will be within scope of this position.
Key Responsibilities: Correct redlined models/drawings issued by drafting lead or engineering/development teams Convert legacy hand drawn and AutoCAD drawings into 3D models and associative drawings Create 2D drawings from existing 3D models from other users Collect data from engineering teams and incorporate information into appropriate drawing Collect measurements/information from production floor to incorporate into drawings Required Education: Candidates should possess one of the following, but other technical degrees with demonstrated skills in drafting will be considered: o A.A.S.
Mechanical Engineering Technology degree o A.O.S.
Drafting/CAD degree o Drafting Certificate/Certification Candidates without degrees must demonstrate proficiency in 2D and 3D drafting Required Experience and Skills: Minimum of 2 years professional experience in the mechanical drafting field Working knowledge of ASME/ANSI drafting standards General Windows-based computer skills Proficient in the use of Autodesk Inventor and Autodesk Vault software Able to adapt to company standards and guidelines Strong work ethic Strong attention to detail Interview Process: 1 Phone screen or Teams call 2 In Person Interview About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
AutoCad, Autodesk Inventor, ASME/ANSI, Autodesk Vault
Remote working/work at home options are available for this role.
Position is hybrid with requirement to travel to Sayre, PA at least once a month.
Summary:
The Engineer, Compute System Engineering is responsible for the implementation and support of compute based infrastructure, including public, private and hybrid cloud deployment models to support critical healthcare operations across The Guthrie Clinic (TGC). This role ensures high availability and performance for clinical systems, patient care services, and administrative functions across the network. The Engineer collaborates with IT teams, vendors, and hospital stakeholders to align server infrastructure with organizational goals and regulatory requirements. This position will be a technology advocate throughout the organization for the effective application of technology to meet business needs and to support business changes and growth. Technology functions include cloud computing, database, storage, data protection, virtualization, hyperconverged infrastructure, server automation, monitoring and application delivery.
Experience:
- Preferred three to five (3 to 5) years of experience in implementing and managing Windows and Open Systems server infrastructure hybrid cloud solutions in an enterprise environment; healthcare experience preferred.
- Highly experienced information systems professional with a strong technical background and proven track record of accomplishments in a large, complex multi-level organization .
- Strong technical knowledge of VMWare ESX and Microsoft Hyper-V.
- Expertise in Microsoft Windows, Linux and AIX operating systems and management.
- Familiar with hyperconverged infrastructures such as VxRail.
- Familiar with Microsoft Azure Arc, System Center, Admin Center and SCCM.
- Familiar with cloud platforms (e.g., AWS, Azure, Google Cloud).
- Experience in infrastructure-as-code (e.g., Terraform, CloudFormation) and containerization (e.g., Docker, Kubernetes).
- Experience in scripting (PowerShell, Python, Bash, etc.)
- Familiar with application delivery solutions such as Citrix.
- Experience with storage and data protection replication methodologies.
- Experience with Epic Infrastructure such as Hyperspace.
- Experience with ITSM functionalities such as change control, CMDB and ticketing systems.
- Strong knowledge of healthcare information systems (e.g., Epic, Cerner), cybersecurity and clinical operations.
- Prior experience delivering high availability systems in a 24/7 environment across geographically dispersed business units.
- Demonstrated ability to facilitate evaluation of technologies and achieve consensus on technical standards and solutions among a diverse group of information technology professionals.
- Demonstrated commitment to customer service who has provided responsive and effective support, developed solid working relationships with customers, and delivered high quality, value-added services that met/exceeded customer expectations.
- Equally adept at developing technology strategies and the operation of existing technical infrastructures. Significant experience and knowledge of computing architecture and implementation of networked computing structures.
- Polished professional with demonstrated information technology experience and strong communication skills that can rapidly gain and maintain credibility with customers and IT colleagues.
- Bachelor’s degree in Information Technology, Computer Science, Healthcare Administration or related field strongly desired or an equivalent combination of education and experience.
- Preferred certifications include Microsoft Certified: Azure Fundamentals, VCP-DCV, ECSA.
- Responsible for installation and maintenance of server infrastructure along with upgrading/configuration and the life cycle management of hardware.
- Monitors functions of server infrastructure to ensure acceptable performance.
- Creates and maintains documentation related to server configuration and environments.
- Serves as subject matter expert across server operating systems and solutions (Microsoft Windows Server, Linux, AIX, VMWare ESX, Microsoft Hyper-V)
- Troubleshoots and resolves server and virtualization incidents.
- Maintain server patching to address security vulnerabilities.
- Collaborate with cloud compute architect to design and build functional server environments.
- Provide level 2 escalation support and troubleshooting to resolve complex server incidents and tasks.
- Stay current on cloud and systems engineering trends (e.g., serverless computing, containerization, AI-driven automation) and evaluate their potential to enhance TGC operations.
- Ensure systems, applications and data are high availability, backed up and/or replicated to meet disaster and business recovery requirements.
- Implement and enforce security requirements to protect Azure-based systems and data.
- Anticipates and provides solutions for complex problems and issues, recommends upgrades and enhancements. Rapidly absorbs complex technical and conceptual information to identify issues and implications. Able to present understandable alternatives to both technical and non-technical individuals at all levels of the organization.
- Monitors industry trends, maintains knowledge of developments in cloud computing, database, storage, data protection, virtualization, hyperconverged infrastructure, server automation, monitoring and application delivery.
- Promotes the use of TGC’s PMO methodology and standards to manage IT initiatives.
- Demonstrates commitment to customer service by providing responsive and effective support, developing solid working relationships with customers and IT colleagues, and delivering high quality, value-added services that exceed customer expectations.
- Demonstrates a commitment to excellence in Customer Service with all internal and external customers of TGC.
- Performs related duties as assigned and unrelated duties as requested.
About Us
Joining the Guthrie team allows you to become a part of a tradition of excellence in health care. In all areas and at all levels of Guthrie, you’ll find staff members who have committed themselves to serving the community.
The Guthrie Clinic is an Equal Opportunity Employer.
The Guthrie Clinic is a non-profit, integrated, practicing physician-led organization in the Twin Tiers of New York and Pennsylvania. Our multi-specialty group practice of more than 500 physicians and 302 advanced practice providers offers 47 specialties through a regional office network providing primary and specialty care in 22 communities. Guthrie Medical Education Programs include General Surgery, Internal Medicine, Emergency Medicine, Family Medicine, Anesthesiology and Orthopedic Surgery Residency, as well as Cardiovascular, Gastroenterology and Pulmonary Critical Care Fellowship programs. Guthrie is also a clinical campus for the Geisinger Commonwealth School of Medicine.
Remote working/work at home options are available for this role.
